PDA

View Full Version : Chat Modifications - MGC Chatbox Evo


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [18] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

VBDev
02-12-2009, 10:07 AM
i was talking with the author of the post, that had the same error of me

Oh ok =)

yes thats it.

That's odd ! I tested in Opera and it works perfectly.

This Chatbox uses 1/4 of the resources of the other popular chatbox. I had the other one installed, and many people complained of how slow it was. When I installed this one, they immediately noticed the difference. I have 20 people at a time chatting with no problems.

Thanks for the comment :)

Ok. If this is so DIFFICULT for you to understand I made you screenshot.

http://img443.imageshack.us/img443/4389/foto2aw6.gif

WHITE PAGE ON THE RIGHT SIDE!!!

Oh ok, is the mgc_cb_evo.php file present in the acp ?

What a dumb comment... Maybe because other mods aren't near as complex as this mod is either. This is BY FAR the best effin chatbox out there IMO! I have used at least 4 other chatboxes in the last 3 years and all of them were WEAKSAUSE compared to MGC EVO! Also VBDev is one of the best developers who has stood by his mod who is constantly on here helping everyone with their issues. Just look thru this entire thread and you can clearly see almost everyone one of VBDev's posts also always filled with 5 or 6 quotes answering everyones questions and trying to fix everyones issues...

I challenge you to find another chatbox for vb that has as many features as MGC and a developer that stands by his mod as good as VBDev does....

Don't worry I'll wait...... :rolleyes:

Ah ah nice answer ;)

VBDev
02-12-2009, 10:07 AM
Now i can specify the error...
If i move a thread with a move notice in the old sub-forum i become the error.

Am adding it to the bug list to fix.

powersilie
02-12-2009, 11:48 AM
I installed the chatbox 2 weeks ago and it was perfect. Yesterday I updated and first it didn' t work at all.
Box appeared, but it was loading...loading.....and it wasn't possible to write.

Now it works, but only this way:

I opened "Chatbox display on forumhome" and replaced this tag:
$find_text = '$forumhome_markread_script';

with this one:
$find_text = '$$chatbox_forumhome';

It's only working with 2 $ and only in forumhome, not on other sites.

Greetings
Karin

DigitALL
02-12-2009, 12:18 PM
Any tester would have a limited patience in trying things out... and that makes me a frustrated person.
I am using this chat box since version 0.4, then upgraded to 0.7x, then to version 1.0 and finally now at version 2.2.1
All versions except the last one worked without any problem for me and now I am wondering why I have upgraded from version1 to version2, just to have more headaches?
I am struggling with version 2 from more than two weeks and perhaps you understand why my patience is at its limits.

1. I have the well known "Loading..." message that apparently tons of other users have it and so far, none got a straight answer to the problem other than to refresh the cache...
If I refresh the screen few times, eventually it will display. It is inconsistent. For that reason, nobody is posting anymore in my forum.
Why the previous versions would work and not this one? Isn't that obviously a problem with this "Loading..." message? How I could call it an "evolving software" (as per your words) when in fact, beside few more options, overall it works worse than previous versions?
I run vB 3.8.1, I know to refresh my cache, using few browsers on different platforms.
I follow info to the letter, I verified myself few times, I have a clean forum with few hacks installed that is running smoothly with no errors (except the ChatBox).
I tried to install it few times, the same result.

Do you have a real solution for "Loading"? What should I do? Should I downgrade to version 1.0? Do I need to take any special measures if I want to downgrade?

Falon
02-12-2009, 01:44 PM
Oh ok, is the mgc_cb_evo.php file present in the acp ?


What exactly do you mean? I have this file in my root folder - public_html.

entertain
02-12-2009, 02:15 PM
What exactly do you mean? I have this file in my root folder - public_html.

There is also a mgc_cb_evo.php that have to be uploaded in the admincp-folder.
(It is not the same like this in the forums root)

MotMann
02-12-2009, 02:48 PM
Any tester would have a limited patience in trying things out... and that makes me a frustrated person.
I am using this chat box since version 0.4, then upgraded to 0.7x, then to version 1.0 and finally now at version 2.2.1
All versions except the last one worked without any problem for me and now I am wondering why I have upgraded from version1 to version2, just to have more headaches?
I am struggling with version 2 from more than two weeks and perhaps you understand why my patience is at its limits.

1. I have the well known "Loading..." message that apparently tons of other users have it and so far, none got a straight answer to the problem other than to refresh the cache...
If I refresh the screen few times, eventually it will display. It is inconsistent. For that reason, nobody is posting anymore in my forum.
Why the previous versions would work and not this one? Isn't that obviously a problem with this "Loading..." message? How I could call it an "evolving software" (as per your words) when in fact, beside few more options, overall it works worse than previous versions?
I run vB 3.8.1, I know to refresh my cache, using few browsers on different platforms.
I follow info to the letter, I verified myself few times, I have a clean forum with few hacks installed that is running smoothly with no errors (except the ChatBox).
I tried to install it few times, the same result.

Do you have a real solution for "Loading"? What should I do? Should I downgrade to version 1.0? Do I need to take any special measures if I want to downgrade?

Yes.. im looking to for the beste Version from the 1,xxx to !!!

The Version 2 , xxx is to slow and to Big. It's not realy a small Chatbox. It's a elephant :(

Where i can get the best Version 1, xx.. i Thing, it was the 1,5?

Falon
02-12-2009, 03:37 PM
There is also a mgc_cb_evo.php that have to be uploaded in the admincp-folder.
(It is not the same like this in the forums root)

Ok, mod is working now. Acp can means so many things :)
Thanks!!!

VBDev
02-12-2009, 04:05 PM
Any tester would have a limited patience in trying things out... and that makes me a frustrated person.
I am using this chat box since version 0.4, then upgraded to 0.7x, then to version 1.0 and finally now at version 2.2.1
All versions except the last one worked without any problem for me and now I am wondering why I have upgraded from version1 to version2, just to have more headaches?
I am struggling with version 2 from more than two weeks and perhaps you understand why my patience is at its limits.

1. I have the well known "Loading..." message that apparently tons of other users have it and so far, none got a straight answer to the problem other than to refresh the cache...
If I refresh the screen few times, eventually it will display. It is inconsistent. For that reason, nobody is posting anymore in my forum.
Why the previous versions would work and not this one? Isn't that obviously a problem with this "Loading..." message? How I could call it an "evolving software" (as per your words) when in fact, beside few more options, overall it works worse than previous versions?
I run vB 3.8.1, I know to refresh my cache, using few browsers on different platforms.
I follow info to the letter, I verified myself few times, I have a clean forum with few hacks installed that is running smoothly with no errors (except the ChatBox).
I tried to install it few times, the same result.

Do you have a real solution for "Loading"? What should I do? Should I downgrade to version 1.0? Do I need to take any special measures if I want to downgrade?

This is not "a whell known" problem, most of the users are having it working.

Only users that have it not working complains ;)

And by the way man keep calm and keep the bold font for you ...

In 2.x.x versions I have moved the whole javascript to yui to be compliant with vBulletin that's all.

If you are having loading issue that could be due to anything, and saying "Ho man I have a loading issue and bla bla bla this is bad bla bla bla" is not a way of resolving things out.

Most of the time it's a cache refreshing problem and if I am saying this each time it's because most of the users don't read the previous posts ...

Anyway, please send me by pm a test account to your forum and I'll have a look.

I also need ftp and admin account accesses in order to see what could cause this.

Gamempire
02-12-2009, 04:10 PM
IT WAS MOOTOOLS!!!!!!!!!!!!!!
WHAT THE XXXX!!!

a plugin add mootools before the href to the yahoo yui.. and so there where some components that make the chat unavaible!!


incredible!
put it in the bug error list :)

VBDev
02-12-2009, 05:05 PM
Which mod are you using that add mootools ?

kronnos
02-12-2009, 05:07 PM
Is it possible to display the chatbox in custom possitions then just the default above and below? Is there some code I could paste in where I want to display?

For exp: I like the option of displaying on forum home below but not exactly where the default position is, i want it a bit lower because it slightly make my template look broken as is. Where can I find that code to move it a little but still be able to control it?

DigitALL
02-12-2009, 05:20 PM
This is not "a whell known" problem, most of the users are having it working.

Only users that have it not working complains ;)

And by the way man keep calm and keep the bold font for you ...

In 2.x.x versions I have moved the whole javascript to yui to be compliant with vBulletin that's all.

If you are having loading issue that could be due to anything, and saying "Ho man I have a loading issue and bla bla bla this is bad bla bla bla" is not a way of resolving things out.

Most of the time it's a cache refreshing problem and if I am saying this each time it's because most of the users don't read the previous posts ...

Anyway, please send me by pm a test account to your forum and I'll have a look.

I also need ftp and admin account accesses in order to see what could cause this.

VB, I apologize if I offended you. I am just frustrated because I never had such a problem. As I mentioned, I used your product previously with no problem and had been very happy about it.

I read all pages and I found at least 10 posts stating the same problem. Then I wanted to register to http://www.forumcoding.com/ and was not accessible this morning. I have this problem from about two weeks and I tried everything.

I noticed that when I post a chat, it does not appear, if I try again it tells me "a chat in progress" but if I try to post again after 10 minutes or so, it displays both chats, so it is inconsistent.

Thank you very much for the offer, I will send you a PM with all the info required shortly:).

powersilie
02-12-2009, 05:51 PM
Now it works, but only this way:

I opened "Chatbox display on forumhome" and replaced this tag:
$find_text = '$forumhome_markread_script';

with this one:
$find_text = '$$chatbox_forumhome';

It's only working with 2 $ and only in forumhome, not on other sites.


Hi VBDev!

Perhaps You know why it only works with this code?? If I change it it doesn't appear at all.

greez
Karin

kronnos
02-12-2009, 06:49 PM
Can someone please help me with the above request? I really would want to know if there there is a way to move the chatbox.

elpida
02-13-2009, 06:59 AM
i was going to buy a branded free.. but it stopped with within a few hours after install. :((

MotMann
02-13-2009, 07:04 AM
This is not "a whell known" problem, most of the users are having it working.

Sorry, that is not correct. All Admins i know have Problems with Vers. 2,x
They all mean, to slow, to big and full of Bugs.

The best testet Version is 1.5 here (https://vborg.vbsupport.ru/showthread.php?t=148472).
Runs on 3.8 xxx easy an fast. And displayed in online.php an other sides. Simply, the best one ;)

Ranger187
02-13-2009, 07:27 AM
Can someone please help me with the above request? I really would want to know if there there is a way to move the chatbox.

That I think is addded up top (go look), or it's part of the branded free option. But let VBDev verify. He's looking at adding it to the side. But you gotta give him time to reply bro. Not only does he make/support multiple products and support them well, but he's also got a life too.

i was going to buy a branded free.. but it stopped with within a few hours after install. :((

I've been using this product since he released it (before the EVO one) and if you read through the pages of posts, results happen. But you can't expect results from a post like yours. "It stopped working" helps zilch bro. Did you get any errors? If you start up firefox error console, do you see any? Does it not work for just a few, etc etc? See what I mean.

If it just stopped, maybe someone changed usergroup permissions. It's looking more and more like vb 3.8.1 is causing the issues.


Sorry, that is not correct. All Admins i know have Problems with Vers. 2,x
They all mean, to slow, to big and full of Bugs.

The best testet Version is 1.5 here (https://vborg.vbsupport.ru/showthread.php?t=148472).
Runs on 3.8 xxx easy an fast. And displayed in online.php an other sides. Simply, the best one ;)

You are comparing something that's been out for how long, through how many revisions to a totally new re-coded chat? He recoded this from the ground up, give it time. Nothing is bug free. I've been on 2.10 and I've stayed there for a reason. I've learned from being a Network Admin, you don't install the latest until it's been tested and out for a while. I'd revert to 2.0.2 or 2.1.0 before 1.5.

By people reporting bugs/issues, gets results. Do you think builds before 1.5 were stable and fast? ;)

powersilie
02-13-2009, 07:28 AM
Sorry, that is not correct. All Admins i know have Problems with Vers. 2,x
They all mean, to slow, to big and full of Bugs.

The best testet Version is 1.5 here (https://vborg.vbsupport.ru/showthread.php?t=148472).
Runs on 3.8 xxx easy an fast. And displayed in online.php an other sides. Simply, the best one ;)

Thank You so much! Vielen Dank!
I'll uninstall the 2... version and take this one (I used this before but I didn't find the download link again!)

Dankbare Gr??e
Karin

DL_Ashe
02-13-2009, 07:52 AM
Not sure why, but for some reason the down arrow for the Actions Menu, that was previously appearing to the left of each username in the chatbox has now disappeared.

I've verified permissions, and even my administrator account can't see it. Everything else works fine, and commands can be carried via typing them (/slap, /pm, /ban, etc), but that handy Actions menu has gone. Not even a box with a red cross... just nothing at all.
Any ideas?

VBDev
02-13-2009, 09:04 AM
Is it possible to display the chatbox in custom possitions then just the default above and below? Is there some code I could paste in where I want to display?

For exp: I like the option of displaying on forum home below but not exactly where the default position is, i want it a bit lower because it slightly make my template look broken as is. Where can I find that code to move it a little but still be able to control it?

You can do that by using the "style issue fix" explained in the readme.

Even if you don't have style issue this will let you add it wherever you want.

VB, I apologize if I offended you. I am just frustrated because I never had such a problem. As I mentioned, I used your product previously with no problem and had been very happy about it.


That's ok :)


I read all pages and I found at least 10 posts stating the same problem. Then I wanted to register to http://www.forumcoding.com/ and was not accessible this morning. I have this problem from about two weeks and I tried everything.


Yes server was down, but no it's fine.


I noticed that when I post a chat, it does not appear, if I try again it tells me "a chat in progress" but if I try to post again after 10 minutes or so, it displays both chats, so it is inconsistent.


That's strange, coz currently I went on your website and chatbox runs smoothly, chats are refreshed and sent without any issue in Firefox.

Hi VBDev!

Perhaps You know why it only works with this code?? If I change it it doesn't appear at all.

greez
Karin

You shouldn't use two $ that's totally uneeded.

Perhaps you put the wrong code in the template ?

Sorry, that is not correct. All Admins i know have Problems with Vers. 2,x
They all mean, to slow, to big and full of Bugs.

The best testet Version is 1.5 here (https://vborg.vbsupport.ru/showthread.php?t=148472).
Runs on 3.8 xxx easy an fast. And displayed in online.php an other sides. Simply, the best one ;)

It's like you were comparing a french "2 Chevaux" with a recent BMW ...

That I think is addded up top (go look), or it's part of the branded free option. But let VBDev verify. He's looking at adding it to the side. But you gotta give him time to reply bro. Not only does he make/support multiple products and support them well, but he's also got a life too.


And vBulletin coding is not my job at all ;)

I have : a job (digital electronic engineer), a own company who sale electronic boards, and vbulletin ... :D and a life :eek:


I've been using this product since he released it (before the EVO one) and if you read through the pages of posts, results happen. But you can't expect results from a post like yours. "It stopped working" helps zilch bro. Did you get any errors? If you start up firefox error console, do you see any? Does it not work for just a few, etc etc? See what I mean.


Agreed !


If it just stopped, maybe someone changed usergroup permissions. It's looking more and more like vb 3.8.1 is causing the issues.


Yes and the issue doesn't come from the chatbox. Other ajax functionnalities are touched.

We were having this problem on forumcoding and were forced to deactivate zlib due to that ... But no answer from Jelsoft team :(

VBDev
02-13-2009, 09:05 AM
Not sure why, but for some reason the down arrow for the Actions Menu, that was previously appearing to the left of each username in the chatbox has now disappeared.

I've verified permissions, and even my administrator account can't see it. Everything else works fine, and commands can be carried via typing them (/slap, /pm, /ban, etc), but that handy Actions menu has gone. Not even a box with a red cross... just nothing at all.
Any ideas?

When did it stop working ?

Ranger187
02-13-2009, 09:37 AM
Yes and the issue doesn't come from the chatbox. Other ajax functionnalities are touched.

We were having this problem on forumcoding and were forced to deactivate zlib due to that ... But no answer from Jelsoft team :(

Is there a post on VB.com about this? If so I'll bump it. You can PM me link if you rather. I've noticed that 2.1.0 and 3.8 RC4 have been fine. I haven't gone to 3.8 final yet, or 3.8.1 but at least we know it's not the chatbox.

Anything that can be tried/tested/etc to resolve this? Or it's just wait on Jelsoft to give us the wtf is up?

Insomnia + Ideas + Servers next to me = I need to stop having ideas.

Brain fart: I'll pm you, cuz this might get too many people thinking. LOL! And just sent and now my brain hurts.

VBDev
02-13-2009, 10:18 AM
Nope sorry I don't have the link

danielbahl
02-13-2009, 12:15 PM
Hi VBDev,

Safari-problem still exist:
I just reinstalled your mod. Replaced all files with the new ones. Reimported Language and Product and cleaned my cache (even tried another newly reinstalled Mac).

But the problem is still there. Safari shows ONE old chat-line, as the first line, screenshot:

94811

danielbahl
02-13-2009, 12:28 PM
After I load the notifications in a separate Query, Safari works again! Hope my tip can help others :)

TNI
02-13-2009, 12:46 PM
Hum that strange I am adding to the bug list.

Do you have this problem both in chats at the top and chats at the bottom ?

I found my problem, it was the same as gamespire's, I am using TCattd - The Image Resizer (https://vborg.vbsupport.ru/showthread.php?t=184571&highlight=TCattd+Image+Resizer) it uses mootools.js and slimbox.js. Once I turned that mod off the chat started working in FF and Safari.

d0nbiz
02-13-2009, 02:29 PM
It was working when I was using the older version of the shoutbox on my 3.8.1 then I upgraded to the newer version for 3.8.x and it stopped working. I configured it all but it just won't show up on the forum now'

DL_Ashe
02-13-2009, 10:16 PM
When did it stop working ?

2 days ago, everything was perfect. Yesterday, the down arrow just vanished. The only singular change on the forums between now and then, was I turned on the "Who's Online" function (so it appears beneath the chatbox), and turned off the use of the "Who's Online" button... at the request of my forum members. Other than that, nothing.

A revert back to the Who's Online button, didn't bring the down arrow for the Actions menu back (tried already).

Ranger187
02-14-2009, 05:28 AM
It was working when I was using the older version of the shoutbox on my 3.8.1 then I upgraded to the newer version for 3.8.x and it stopped working. I configured it all but it just won't show up on the forum now'

Usergroup options set?

SnapOff Racing
02-14-2009, 08:51 AM
Has the issue with the chats not being aligned in FF 3.0.6 been fixed? Just wondering because I just installed 2.2.1 and my chats are aligned just fine in FF 3.0.6 I'm using vb 3.7.3 so maybe only > 3.8.0 is affected or something???


Also I notice that two tables are missing from the new 2.2.1 version
isthreadwarning
ispostwarning

Have these tables been removed from the coding altogether or are they for an option that I just don't have enabled yet?

Other than that everything looks good Thanks VBDev :up:

entertain
02-14-2009, 09:01 AM
Align usernames and chats not working in latest Firefox version (3.0.6)
Seems to work, when the latest shouts will be displayed at the top of the chatbox.
Otherwise not..

SnapOff Racing
02-14-2009, 09:55 AM
Seems to work, when the latest shouts will be displayed at the top of the chatbox.
Otherwise not..

Oh ok I suppose that's why mine is working fine then. Thanks for that input! :up:

kronnos
02-14-2009, 10:31 AM
You can do that by using the "style issue fix" explained in the readme.

Even if you don't have style issue this will let you add it wherever you want.

(

Thank you, I was able to make the changes but then I ran into another problem. Is there anyway to actually edit the chatbox template itself? I noticed where ever i insert the $chatbox_forumhome code, it automatically makes a space after even if there is no <br/> in the template I paste it into. Also, I wanted to add it into a table but it removes the table class for all the other items in that table. So I would want to remove table class close in the chatbox template itself.

So basically, where can I find the full code for what this equalls to = $chatbox_forumhome ?

table class

DigitALL
02-14-2009, 04:07 PM
Hello VBDev,

Thank you for looking into this issue. The ChatBox appears to work fine but I would estimate only in about 60% of cases. So here it goes:
- Tested in IE, FF and Safari on Windows and OSX platforms. It seems that it is not related to browsers. I use FF most but in my opinion, the ChatBox should be made to work best in IE. Over 70% of worldwide internet users are using IE.

- I open the forum home in ten pages and in about six of these pages, the ChatBox content will appear fine. In the rest of them (about 40%) the ChatBox would stay at "Loading..." state.

- In some cases when the ChatBox appears correct, when you type something in the ChatBox, the chat would not be displayed.

- I have also noticed that if one browser display I would post a chat, in some cases, on the other pages, that chat would not appear, like it does not refreshes automatically. If I do a browser refresh, it will either display the chat, or it will stay on "Loading...".

- As I wrote before, it seems that it is not stable. From the many tests I've done, it appears that in about 60% cases it will work, and 40% not.
Since I have few skins installed, I have tried this multiple times under different skins.
In one point, I've disabled most of the plugins, leaving the ChatBox to see if there is some kind of conflict with any of the plugins. Unfortunately, it was the same (random display of "Loading").

- Again, when I used to have VB 3.7.3 with ChatBox v.1, everything was working just fine, I was very happy about it. Before upgrading to 3.8.1, I have removed completely the ChatBox and its files and then I've started fresh with v.2.2 and then 2.2.1 and have this problem of "Loading..." being displayed randomly.

- Would be this issue because of the new VB version or due to the new version in ChatBox? I have no clue what to do next and honestly, I would return to version 1, if I would be sure that it will work fine under 3.8.1. Would that be feasible?
You have all the site info, so you are welcome to pop-in anytime. Thank you very much :)

deta
02-14-2009, 04:20 PM
Originally Posted by deta View Post

Please fix the bug with ibproarcade!!!!

cu Deta

Hey man calm down !!!
I am not a little dog that obey orders.

I have nothing to say some days, perhaps my Users ar very :down: :mad:

cu Deta

Gamempire
02-14-2009, 09:17 PM
Which mod are you using that add mootools ?

a personal mod that add some function to my forum related to my portal of videogames :)

KillerStefan
02-15-2009, 11:39 AM
I want to type in bold and with FF9900 as color always on the chatbox but the color isn't avaiable as custom parameter.
Any idea how to do this?

michi123
02-15-2009, 01:08 PM
hey

i got a problem @ installing the box! im not able to import the product :(! it always says: Die bei der Anfrage ?bermittelten Daten sind f?r die -Methode nicht erlaubt oder die Datenmenge hat das Maximum ?berschritten.
The request for the data transmitted for the method is not allowed or the amount of data has exceeded the maximum.

can sumone help me to solve this problem pls?

DigitALL
02-15-2009, 01:12 PM
Hi,

I noticed that on the product page there is a link to the CMPS module. But when you got there, on the module page, it is stated to work only with version 1. Will that module be updated? If not, I see no point to be linked to it.

Skyrider
02-15-2009, 03:26 PM
VBDEV, I just updated and wanted to approve a thread that was put in to moderation. When I attempted to do so, I got this error:

Invalid SQL:

INSERT INTO mgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1234718690,,'73265,Disable vac',0,0,0,1,'thread',63);

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''73265,Disable vac',0,0,0,1,'thread',63)' at line 4

Any idea?

Doctor Death
02-15-2009, 08:51 PM
1. Is there any simple way to replace the Yahoo CSS so that you can read the error messages?

2. I am having a hard time understanding how to slap or use other "/" enabled keys. can you please provide a text example?

3. Is there an easy way to replace the "Boing" sound with something a little less irritating?

4. I love this mod... it is by far one of the best I have seen. Thanks a million, I will donate soon.

Ranger187
02-15-2009, 09:09 PM
DD,

#3 is easy. put the sound you want in place of the boing, and simple rename it to the default sound. ;)

#2, Make sure you enabled the commands. It's like the 1st or 2nd option for MGC in the admin cp

#1, Use Firefox and open the error console.

Doctor Death
02-15-2009, 09:28 PM
I have enabled... trying to slap.....

so it would be

/slap Joesmith

or how?

Thanks for the note!

Ranger187
02-15-2009, 09:56 PM
Command /slapThis command lets you slap another user. To slap another user, you just have to use either the menu available on the left of the message or by using one of the following syntaxes:
/slap uid userid : Slap the user whom userid is passed as command parameter.
/slap uname username : Slap the user whom username is passed as command parameter.

If you don't see that in the help icon it's not enabled. It should also be available in the drop down list next to each name. And if not, again, it's not enabled, or you didn't set permissions for usergroup. ;)

FRANKTHETANK 2
02-16-2009, 12:15 AM
I have two problems. In my chat box, were you type in what you want to say. It's all in a different language. I can't figure out how to change that. Any ideas? And when I slap someone it says The user you are trying to slap doesn't exist

EDIT: I GOT THE SLAP TO WORK BUT AFTER I PUT THE COMMAND IN IT SHOWS EVERYTHING IN A DIFFERENT LANGUAGE

Ranger187
02-16-2009, 12:30 AM
I have two problems. In my chat box, were you type in what you want to say. It's all in a different language. I can't figure out how to change that. Any ideas? And when I slap someone it says The user you are trying to slap doesn't exist

EDIT: I GOT THE SLAP TO WORK BUT AFTER I PUT THE COMMAND IN IT SHOWS EVERYTHING IN A DIFFERENT LANGUAGE

Read the install file again. You didn't change the default language, or you didn't change the default prompt. Default prompt is in french. YOU have to change it to whatever you want if you enable it. It's in the MGC settings.....one of those categories........ near bottom.

Same with slap. Search this thread for "translation" or "french" and it should show a post from VBDev and from me with the answers. I'm not searching 260 threads. ;)

FRANKTHETANK 2
02-16-2009, 12:40 AM
ok i see what your talking about can you translate these

Displayed when user is limited in number of posts per day
<b>Vous ne pouvez pas envoyer de message car vous avez atteint la limite de chats en 24H de votre groupe d'utilisateurs</b>

/slap command : content of the message
{1} gifle avec violence {2}

Ranger187
02-16-2009, 02:11 AM
ok i see what your talking about can you translate these

Displayed when user is limited in number of posts per day
<b>Vous ne pouvez pas envoyer de message car vous avez atteint la limite de chats en 24H de votre groupe d'utilisateurs</b>

/slap command : content of the message
{1} gifle avec violence {2}

Hence my "search for".... I don't speak french. Search forthat gifle.... it shows a thread where vbdev translates all that.

FRANKTHETANK 2
02-16-2009, 04:24 AM
na he only translates 3 of the 6 things but i figured it out myself thanks anyways

kronnos
02-16-2009, 03:39 PM
Ok, I noticed 2 problems im having so far with the chat.

1. When I post a chat, it goes at the bottom of all the chats eventhough I said it to show newest first. I have to reload the entire page for it to show on top as it should.

2. When clicking the send button or just pressing enter with empty chatbox, it gives some error pop-up message, (Doesnt say anything, just a white pop-up).(Anyway to make it say something or remove it completely)

EDIT:

Ok problem 1 seems to be solved when I removed a sticky post(which didn't really sticky anyway)

Another problem I noticed that it sometimes just shows the refresh animation icon and doesnt refresh to anything.

OblivionMage
02-17-2009, 02:01 AM
I changed a setting a while back to hide the chatbox, only now that I want to use it again I cannot seem to edit it back. This effects all of the styles I have (including default), and I have tried a reinstall. Any ideas? (What settings could be disabling the chatbox? I've looked at usergroup permissions, plugin hooks, mgc settings, the suggested template / plugin hook edits, etc...)

VBDev
02-17-2009, 04:35 AM
Hi VBDev,

Safari-problem still exist:
I just reinstalled your mod. Replaced all files with the new ones. Reimported Language and Product and cleaned my cache (even tried another newly reinstalled Mac).

But the problem is still there. Safari shows ONE old chat-line, as the first line, screenshot:

94811

After I load the notifications in a separate Query, Safari works again! Hope my tip can help others :)

Hum, that's odd. I'll give it a look then. I am adding this to the bug list.

I found my problem, it was the same as gamespire's, I am using TCattd - The Image Resizer (https://vborg.vbsupport.ru/showthread.php?t=184571&highlight=TCattd+Image+Resizer) it uses mootools.js and slimbox.js. Once I turned that mod off the chat started working in FF and Safari.

2 days ago, everything was perfect. Yesterday, the down arrow just vanished. The only singular change on the forums between now and then, was I turned on the "Who's Online" function (so it appears beneath the chatbox), and turned off the use of the "Who's Online" button... at the request of my forum members. Other than that, nothing.

A revert back to the Who's Online button, didn't bring the down arrow for the Actions menu back (tried already).

Well there is no reason why the down arrow wouldn't show or would dissapear magically.

Are you sure they haven't been any other change to your forum since then ?

It was working when I was using the older version of the shoutbox on my 3.8.1 then I upgraded to the newer version for 3.8.x and it stopped working. I configured it all but it just won't show up on the forum now'

Does it appear but keep loading or is it just not shown at all ?

VBDev
02-17-2009, 06:07 AM
Seems to work, when the latest shouts will be displayed at the top of the chatbox.
Otherwise not..

Oh ok I suppose that's why mine is working fine then. Thanks for that input! :up:

So chats doesn't get aligned in other browser than firefox when the order of the shouts is set to be newest at the top ?

Thank you, I was able to make the changes but then I ran into another problem. Is there anyway to actually edit the chatbox template itself? I noticed where ever i insert the $chatbox_forumhome code, it automatically makes a space after even if there is no <br/> in the template I paste it into. Also, I wanted to add it into a table but it removes the table class for all the other items in that table. So I would want to remove table class close in the chatbox template itself.

So basically, where can I find the full code for what this equalls to = $chatbox_forumhome ?

table class

Not sure as I don't the code behind my eyes but I think the <br /> is in the plugins.

What do you mean in the last part of the post ?


- Tested in IE, FF and Safari on Windows and OSX platforms. It seems that it is not related to browsers. I use FF most but in my opinion, the ChatBox should be made to work best in IE. Over 70% of worldwide internet users are using IE.


Well as I am not a PC user I make my best to make it works with IE but it's not handy to use a virtualizer to run windows on the Mac.


- I open the forum home in ten pages and in about six of these pages, the ChatBox content will appear fine. In the rest of them (about 40%) the ChatBox would stay at "Loading..." state.


Not sure what you meant by that ?


- In some cases when the ChatBox appears correct, when you type something in the ChatBox, the chat would not be displayed.


Well that's strange.


- I have also noticed that if one browser display I would post a chat, in some cases, on the other pages, that chat would not appear, like it does not refreshes automatically. If I do a browser refresh, it will either display the chat, or it will stay on "Loading...".


When so were you having issues reported in javascript console ?


- As I wrote before, it seems that it is not stable. From the many tests I've done, it appears that in about 60% cases it will work, and 40% not.
Since I have few skins installed, I have tried this multiple times under different skins.
In one point, I've disabled most of the plugins, leaving the ChatBox to see if there is some kind of conflict with any of the plugins. Unfortunately, it was the same (random display of "Loading").

- Again, when I used to have VB 3.7.3 with ChatBox v.1, everything was working just fine, I was very happy about it. Before upgrading to 3.8.1, I have removed completely the ChatBox and its files and then I've started fresh with v.2.2 and then 2.2.1 and have this problem of "Loading..." being displayed randomly.


Do you have zlib installed on your server ?

Because it seems that the 3.8.1 has some bad issues with zlib (we experienced it on forumcoding).

This issues were making the whole ajax functionnalities not working (like quick reply leading to a full post and page refresh instead of only loading of the new chat).

The chatbox is affected by this issue and I thus have to look into it.


- Would be this issue because of the new VB version or due to the new version in ChatBox? I have no clue what to do next and honestly, I would return to version 1, if I would be sure that it will work fine under 3.8.1. Would that be feasible?
You have all the site info, so you are welcome to pop-in anytime. Thank you very much :)

I think it might be related to vB version yep.

I will be investigating on it for the next release (release planned for middle of march).

a personal mod that add some function to my forum related to my portal of videogames :)

Oh ok. I think the issue is with mootols, which is stranged as yahoo is quite independent. I will look into that.

VBDev
02-17-2009, 06:12 AM
I want to type in bold and with FF9900 as color always on the chatbox but the color isn't avaiable as custom parameter.
Any idea how to do this?

You can do that by editing the color array in the functions_mgc_cb_evo.php file :)

hey

i got a problem @ installing the box! im not able to import the product :(! it always says: Die bei der Anfrage ?bermittelten Daten sind f?r die -Methode nicht erlaubt oder die Datenmenge hat das Maximum ?berschritten.
The request for the data transmitted for the method is not allowed or the amount of data has exceeded the maximum.can sumone help me to solve this problem pls?

Have you try uploading it to your server and then doing a server load of the product instead of local one ?

Hi,

I noticed that on the product page there is a link to the CMPS module. But when you got there, on the module page, it is stated to work only with version 1. Will that module be updated? If not, I see no point to be linked to it.

Well I don't know, it's up to stangger5, he's the one that do the link and develop the mode.

You should ask him.

VBDEV, I just updated and wanted to approve a thread that was put in to moderation. When I attempted to do so, I got this error:

Any idea?

When approving a thread ??

You should encounter that issue with the counters update of the chatbox but I don't think so for the moderation.

1. Is there any simple way to replace the Yahoo CSS so that you can read the error messages?

You have to redefine yahoo's css parameters. Do you want me to give a link to you on which parameters to redefine ?

VBDev
02-17-2009, 06:14 AM
I changed a setting a while back to hide the chatbox, only now that I want to use it again I cannot seem to edit it back. This effects all of the styles I have (including default), and I have tried a reinstall. Any ideas? (What settings could be disabling the chatbox? I've looked at usergroup permissions, plugin hooks, mgc settings, the suggested template / plugin hook edits, etc...)

This bug was present in versions earlier than 2.2.1.

DangerousDale
02-17-2009, 01:05 PM
Hello,

I am wondering if you can help me, I have installed this mod and I am trying to intergrate it into the ibproarcade.

I have followed the instruction in the readme and added $mgc_cb_evo_var in the arcade template but nothing shows at all.

I am using VB 3.8.0, just cant figure out why its doing nothing at all.

Any help will be much appreciated.

OblivionMage
02-17-2009, 07:22 PM
This bug was present in versions earlier than 2.2.1.

Thanks for the help!

But I just tried a clean install (Deleted files / edits, product, then reinstalled) and the issue seems to persist (doesn't show). (2.2.1. was used)

Any ideas?

kronnos
02-17-2009, 07:28 PM
There seems to be an error when trying to import from Dream Chat. It always stops at the same chat 12000~ish and gives the following sql error:

Database error in vBulletin 3.8.1:

Invalid SQL:

INSERT INTO bl_mgc_cb_evo_chat
SET
dateline='1203541396',
fromuid='738',
touid='0',
name='96'Blaster240',
ctext='my blaster just got spark! :)',
chanid='0',
userip='95.272.104.81',
coidentifier='0';

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Blaster240',
ctext='my blaster just got spark! :)',
chanid='0',
' at line 6
Error Number : 1064
Request Date : Tuesday, February 17th 2009 @ 04:26:17 PM
Error Date : Tuesday, February 17th 2009 @ 04:26:18 PM
Script : http://mystite/admincp/mgc_cb_evo.php?do=do_import&which=a%3A1%3A%7Bi%3A0%3Bs%3A5%3A%22dream%22%3B%7D&start=10500&teamid=
Referrer : http://mysite/admincp/mgc_cb_evo.php?do=do_import&which=a%3A1%3A%7Bi%3A0%3Bs%3A5%3A%22dream%22%3B%7D&start=10400&teamid=
IP Address : 95.132.221.101
Username : admin
Classname : vB_Database
MySQL Version : 5.0.67-community

d0nbiz
02-17-2009, 08:11 PM
Does it appear but keep loading or is it just not shown at all ?

No, it doesn't appear at all. I've set usergroups for it aswell and still nothing.

Usergroup options set?

Yeah I've set them. It was working before the update just not anymore'

brun0
02-18-2009, 10:23 AM
I have read almost all thread to find a fix for my problem. I have posted before and hopefully the coder will help me out...

I installed first time the ChatBox and worked fine (damn me, I should of leave it like that!) but added CMPS module that did not worked for me. I have uninstalled it (both the module and ChatBox) and completly removing absolutely all files. I started fresh, fixed the permissions in the Usergroups, settings, etc. and when I try to post something I get a page with:
"Your submission could not be processed because a security token was missing.
If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error."

- I have uninstalled it, removed all files, made sure there is nothing in templates.
- I have reloaded all files, installed the product, fixed the permissions (all other settings as default) and still the same message.
- I have optimized/fixed the db, ran the maintenance with most activities there, clean the browser cache (I've tried it on two different computers and three browsers.
- I have re-uploaded the ChatBox files, installed it as an upgrade, fixed the permissions, and i still get this message:
"Your submission could not be processed because a security token was missing.
If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error."

Also, when I click on smilies link, the page moves down to the ChatBox limit and the link in the browser is: http://www.myforum.com/forum/index.php#mgc_cb_evo_top

I ma struggling with this from more than two days and don't know what else I should do. Please help me out.

Exact the same problem here


You refreshed your cache after install ?

Otherwise if using 2.2.1 you shouldn't encounter that issue.
Have you a vB 3.6 version ?

MGC Chatbox Evo version ist 2.2.1, vBulletin version is 3.8.1
Which cache do i have to refresh after install?

SnapOff Racing
02-18-2009, 11:12 AM
So chats doesn't get aligned in other browser than firefox when the order of the shouts is set to be newest at the top ?


No mine works just fine. I have tried using the "Chats display order" set as Newest First and Oldest First and they both work fine. I tested in IE, FF 3.0.6, and Safari... I'm running vb 3.8.1

Also I notice that two tables are missing from the new 2.2.1 version
isthreadwarning
ispostwarning

Have these tables been removed from the coding altogether or are they for an option that I just don't have enabled yet? Can I just go ahead and remove these tables from my db?

Adromir
02-18-2009, 11:50 AM
I think i have the same problem as d0nbiz and OblivionMage:
I am trying to use the ChatBox 2.2.1 on a 3.8.1 vbulletin with default style and the chatbox simply doesnt show anywhere..

VBDev
02-18-2009, 03:54 PM
Hello,

I am wondering if you can help me, I have installed this mod and I am trying to intergrate it into the ibproarcade.

I have followed the instruction in the readme and added in the arcade template but nothing shows at all.

I am using VB 3.8.0, just cant figure out why its doing nothing at all.

Any help will be much appreciated.

It's showing everywhere except in the arcade ?

You have configured both options and change the arcade file ?

Thanks for the help!

But I just tried a clean install (Deleted files / edits, product, then reinstalled) and the issue seems to persist (doesn't show). (2.2.1. was used)

Any ideas?

Does it appear or does it only just not load chats ?

Can you check in Firefox error console and tell me if anything's wrong.

No, it doesn't appear at all. I've set usergroups for it aswell and still nothing.

Yeah I've set them. It was working before the update just not anymore'

Before update to vB3.8 ? or chatbox update ?

VBDev
02-18-2009, 03:57 PM
Exact the same problem here

MGC Chatbox Evo version ist 2.2.1, vBulletin version is 3.8.1
Which cache do i have to refresh after install?

You can't have token errors with vBulletin version 3.8.1 unless you have chatbox templates not reverted.

Is it the case ?

No mine works just fine. I have tried using the "Chats display order" set as Newest First and Oldest First and they both work fine. I tested in IE, FF 3.0.6, and Safari... I'm running vb 3.8.1

Also I notice that two tables are missing from the new 2.2.1 version
isthreadwarning
ispostwarning

Have these tables been removed from the coding altogether or are they for an option that I just don't have enabled yet? Can I just go ahead and remove these tables from my db?

Yes they have been removed and the install script should have removed them.

I think i have the same problem as d0nbiz and OblivionMage:
I am trying to use the ChatBox 2.2.1 on a 3.8.1 vbulletin with default style and the chatbox simply doesnt show anywhere..

If your chatbox doesn't display it might be a style issue or usergroup permissions not set.

I don't see any other reason.

VBDev
02-18-2009, 04:03 PM
There seems to be an error when trying to import from Dream Chat. It always stops at the same chat 12000~ish and gives the following sql error:

Database error in vBulletin 3.8.1:

Invalid SQL:

INSERT INTO bl_mgc_cb_evo_chat
SET
dateline='1203541396',
fromuid='738',
touid='0',
name='96'Blaster240',
ctext='my blaster just got spark! :)',
chanid='0',
userip='95.272.104.81',
coidentifier='0';

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Blaster240',
ctext='my blaster just got spark! :)',
chanid='0',
' at line 6
Error Number : 1064
Request Date : Tuesday, February 17th 2009 @ 04:26:17 PM
Error Date : Tuesday, February 17th 2009 @ 04:26:18 PM
Script : http://mystite/admincp/mgc_cb_evo.php?do=do_import&which=a%3A1%3A%7Bi%3A0%3Bs%3A5%3A%22dream%22%3B%7D&start=10500&teamid=
Referrer : http://mysite/admincp/mgc_cb_evo.php?do=do_import&which=a%3A1%3A%7Bi%3A0%3Bs%3A5%3A%22dream%22%3B%7D&start=10400&teamid=
IP Address : 95.132.221.101
Username : admin
Classname : vB_Database
MySQL Version : 5.0.67-community

Well yeah my fault, here is a fix for all the imports :

Search for :
name='" . $cchatbox_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($cchatbox_chats['username']) . "',

Search for :
name='" . $dream_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($dream_chats['username']) . "',

Search for :
name='" . $diondev_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($diondev_chats['username']) . "',

kronnos
02-18-2009, 04:28 PM
Cool, thanks. Will this all be updated in the next mod update release? BTW, any plans for the next update with some error fixes?

Skyrider
02-18-2009, 05:16 PM
Sorry VBDev, I "approved" once another moderated thread, and got the database error again:


Database error in vBulletin 3.8.0:

Invalid SQL:

INSERT INTO mgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1234984512,,'73301,Adding bots to dedicated server',0,0,0,1,'thread',63);

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''73301,Adding bots to dedicated server',0,0,0,1,'thread',63)' at line 4
Error Number : 1064
Request Date : Wednesday, February 18th 2009 @ 08:15:12 PM
Error Date : Wednesday, February 18th 2009 @ 08:15:12 PM
Script : http://forum.esforces.com/inlinemod.php?threadid=73301&p=
Referrer : http://forum.esforces.com/showthread.php?t=73301
IP Address : xxxxxxxxx
Username : FF|Skyrider
Classname : vB_Database
MySQL Version : 5.0.32-Debian_7etch8-log

Michael.A
02-18-2009, 09:43 PM
when i try to view any user chat i get this


Database error in vBulletin 3.7.5:

Invalid SQL:

SELECT COUNT(chatid) AS nbchats
FROM mgc_cb_evo_chat AS c
LEFT JOIN user AS fromu ON (c.fromuid=fromu.userid)
LEFT JOIN user AS tou ON (c.touid=tou.userid)
WHERE coidentifier IN ('0','me','announcement','ban','del','ignore','pm' ,'slap') AND fromuid='3' AND isthreadwarning='0' AND ispostwarning='0'
ORDER BY c.dateline DESC;

MySQL Error : Unknown column 'isthreadwarning' in 'where clause'
Error Number : 1054
Request Date : Wednesday, February 18th 2009 @ 11:35:04 PM
Error Date : Wednesday, February 18th 2009 @ 11:35:04 PM
Script : http://my site.com/forum/mgc_cb_evo.php?do=search&what=userchats&u=3
Referrer : http://my site.com/forum/forum.php
IP Address : xxxxxxxxxxxxxxxx
Username : xxxxxxxxxxxxxxx
Classname : vB_Database
MySQL Version : 5.0.67-community
how can i fix this?
thank you..

VBDev
02-19-2009, 04:30 AM
Cool, thanks. Will this all be updated in the next mod update release? BTW, any plans for the next update with some error fixes?

Yes sure this will be updated.

Well I am currently updating one of my other non-free mod currently and next is the chatbox update.

I think I'll be releasing a new chatbox version in one or two weeks.

Sorry for this delay but you know I am doing vBulletin during my free time so it takes a bit more time than if I was developping during the whole day.

Sorry VBDev, I "approved" once another moderated thread, and got the database error again:

Yeah, I have added this to the bug list already.

when i try to view any user chat i get this


Database error in vBulletin 3.7.5:

Invalid SQL:

SELECT COUNT(chatid) AS nbchats
FROM mgc_cb_evo_chat AS c
LEFT JOIN user AS fromu ON (c.fromuid=fromu.userid)
LEFT JOIN user AS tou ON (c.touid=tou.userid)
WHERE coidentifier IN ('0','me','announcement','ban','del','ignore','pm' ,'slap') AND fromuid='3' AND isthreadwarning='0' AND ispostwarning='0'
ORDER BY c.dateline DESC;

MySQL Error : Unknown column 'isthreadwarning' in 'where clause'
Error Number : 1054
Request Date : Wednesday, February 18th 2009 @ 11:35:04 PM
Error Date : Wednesday, February 18th 2009 @ 11:35:04 PM
Script : http://my site.com/forum/mgc_cb_evo.php?do=search&what=userchats&u=3
Referrer : http://my site.com/forum/forum.php
IP Address : xxxxxxxxxxxxxxxx
Username : xxxxxxxxxxxxxxx
Classname : vB_Database
MySQL Version : 5.0.67-communityhow can i fix this?
thank you..

To fix this, open mgc_cb_evo.php file.

Search for the multiple occurences of :
$where_clause .= " AND isthreadwarning='0' AND ispostwarning='0'";

Replace it by :
$where_clause .= " AND iswarning='0'";

Michael.A
02-19-2009, 08:07 AM
thank you,
installed and lovein it,
there is that one more thing how can i take this igly
tax out from the chat box '' MGC Chatbox Evo created by MGC, Version 2.2.0, Copyright 2009 all rights reserved''

do i have to pay to do so.??

Harley D
02-19-2009, 08:27 AM
Branding free version

A branding free version is available for purchase here (http://www.forumcoding.com/awc_ps.php?do=products) at the price of 20$.

The package grants you access to :

* One year download access to the download of the package
* MGC Chatbox Evo Branding Free version :
The free version of the product is released with a branding label which displays the name of the product, its version and a link back to our forum.
This label must remain intact as part of the scripts. The purchasing of this package grants you the right of removal of the copyright from the chatbox.
However, it doesn't transfer in any manner the copyright of the MGC Chatbox Evo product and doesn't allow you to distribute it in any medium.
Please read our Term of Service for further information.
* Set of buttons:
o MSD set: available in blue, green and orange flavors
o Evo 2 set: available in blue, brown, green, orange, purple, silver and yellow flavors
o More to come ...
* Chatbox plugins:
o IBProarcade notifications in the chatbox (New highscore and tournament won)

It will updated regularly with plugins for the chatbox as well as other button packs.
Its well worth it.

VBDev
02-19-2009, 10:31 AM
And more notifications plugins to come in the future :)

As well as certainly a caching system feature only available in BF version (faster performances)

SnapOff Racing
02-19-2009, 12:32 PM
Well yeah my fault, here is a fix for all the imports :

Search for :
name='" . $cchatbox_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($cchatbox_chats['username']) . "',

Search for :
name='" . $dream_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($dream_chats['username']) . "',

Search for :
name='" . $diondev_chats['username'] . "',

Replace it by :
name='" . $vbulletin->db->escape_string($diondev_chats['username']) . "',

Are you sure about this VBDev? Because looking thru my older versions of MGC they use the "$vbulletin->db->escape_string" syntax on the ctext line and NOT the name line... See picture below....

https://vborg.vbsupport.ru/

msu2k
02-19-2009, 12:39 PM
And more notifications plugins to come in the future :)

As well as certainly a caching system feature only available in BF version (faster performances)

I just bought the branding free version for the promise of a caching system alone. :) Thanks for the great product.

Skyrider
02-19-2009, 01:08 PM
VBDev, remember the SQL errors I get? I get the same when moving threads.

VBDev
02-19-2009, 01:20 PM
Are you sure about this VBDev? Because looking thru my older versions of MGC they use the "$vbulletin->db->escape_string" syntax on the ctext line and NOT the name line... See picture below....

http://i178.photobucket.com/albums/w261/DSMKilla1/mgc_script.png

Both line should have it :) It's a mistake on my side.

I just bought the branding free version for the promise of a caching system alone. :) Thanks for the great product.

He he thanks :)

VBDev, remember the SQL errors I get? I get the same when moving threads.

Well when moving threads is the one that is known.

SnapOff Racing
02-19-2009, 03:24 PM
Both line should have it :) It's a mistake on my side.



Oh ok, does this go for ALL of the chat imports or just the ones you specified?

tehtide
02-19-2009, 03:47 PM
In the firefox error console I'm getting a number of errors. If I turn off all plugins errors go away, but if I enable just this plugin the errors come back.

Errors are as follows:

Warning: Error in parsing value for property 'width'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 9



Warning: Error in parsing value for property 'margin-left'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 14



Warning: Error in parsing value for property 'filter'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 24


And then a number of these:


Warning: Expected declaration but found '*'. Skipped to next declaration.
Source File: http://yui.yahooapis.com/combo?2.6.0/build/container/assets/skins/sam/container.css&2.6.0/build/button/assets/skins/sam/button.css
Line: 7



I'm using 2.2.1 and I have vbulletin 3.8.1.

lille L
02-19-2009, 05:10 PM
A few questions:

- How do I get this into the navbar? (menu on the top of the site, control panel, search, log out etc..)
- The icon beside the avatar, menu_open.gif is not showing, any idea? Its uploaded where its supposed to...

lille L
02-19-2009, 05:32 PM
*blush* solved

***

But I am still wondering about the nav question :)

MDK-Indy
02-20-2009, 10:45 AM
I have a Database error if i Approve Posts...

Database error in vBulletin 3.8.0 Beta 2:

Invalid SQL:

INSERT INTO vbmgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1235133510,,'7422,Geb?udeabbruch Stufe 1 Bug',0,0,0,1,'thread',19);

MySQL Error : Fehler in der SQL-Syntax. Bitte die korrekte Syntax im Handbuch nachschlagen bei ''7422,Geb?udeabbruch Stufe 1 Bug',0,0,0,1,'thread',19)' in Zeile 4
Error Number : 1064
Request Date : Friday, February 20th 2009 @ 01:38:30 PM
Error Date : Friday, February 20th 2009 @ 01:38:30 PM
Script : http://forum.....de/inlinemod.php?threadid=7422&p=
Referrer : http://forum.....de/showthread.php?t=7422
IP Address : 217.226.218.56
Username : Indy
Classname : vB_Database
MySQL Version : 5.0.32-Debian_7etch8-log

kronnos
02-20-2009, 02:42 PM
Is there a way to change the color of the error message when submitting an empty chat. I barely saw the error message "Error: You must enter a chat !" because the text in just about the same color as the background. I think this goes for other error message I received.

Also, is there any way to change the username color so it shows each username in its respective color according to their user ranks.

Shamil.
02-20-2009, 08:59 PM
Is there a way to sync this up with a forum? So anything posted in the chatbox will show up in a forum and vice-versa?

gpc10347
02-21-2009, 12:51 PM
Small request: To submit a chat in the main window uses either Enter or Okay as submit. Private Chat requires Okay and will not accept Enter key alone. Would love to see Private chat submission be consistant with standard chat. (Using IE)

Thanks!

deta
02-21-2009, 01:30 PM
Hello!

Please, Please Fix the obproarcade Bug!

My User are very :mad::(:mad:

Thanks

cu Deta

Nadeemjp
02-21-2009, 10:36 PM
the admincp mcg chatbox menu is in some other language. how do i do it in english?

Nadeemjp
02-22-2009, 12:44 AM
i am having the following error:


Database error in vBulletin 3.8.1:

Invalid SQL:

SELECT COUNT(chatid) AS nbchats
FROM mgc_cb_evo_chat AS c
LEFT JOIN user AS fromu ON (c.fromuid=fromu.userid)
LEFT JOIN user AS tou ON (c.touid=tou.userid)
WHERE coidentifier IN ('0') AND fromuid='499' AND isthreadwarning='0' AND ispostwarning='0'
ORDER BY c.dateline DESC;

MySQL Error : Unknown column 'isthreadwarning' in 'where clause'
Error Number : 1054
Request Date : Saturday, February 21st 2009 @ 07:24:49 PM
Error Date : Saturday, February 21st 2009 @ 07:24:50 PM
Script : http://www.familybunker.com/forums/mgc_cb_evo.php?do=search&what=userchats&u=499
Referrer : http://www.familybunker.com/forums/
IP Address : 173.76.154.229
Username : *****
Classname : vB_Database_MySQLi
MySQL Version : 5.0.67-community-log

any help?

entertain
02-22-2009, 11:49 AM
i am having the following error:


Database error in vBulletin 3.8.1:

Invalid SQL:

SELECT COUNT(chatid) AS nbchats
FROM mgc_cb_evo_chat AS c
LEFT JOIN user AS fromu ON (c.fromuid=fromu.userid)
LEFT JOIN user AS tou ON (c.touid=tou.userid)
WHERE coidentifier IN ('0') AND fromuid='499' AND isthreadwarning='0' AND ispostwarning='0'
ORDER BY c.dateline DESC;

MySQL Error : Unknown column 'isthreadwarning' in 'where clause'
Error Number : 1054
Request Date : Saturday, February 21st 2009 @ 07:24:49 PM
Error Date : Saturday, February 21st 2009 @ 07:24:50 PM
Script : http://www.familybunker.com/forums/mgc_cb_evo.php?do=search&what=userchats&u=499
Referrer : http://www.familybunker.com/forums/
IP Address : 173.76.154.229
Username : *****
Classname : vB_Database_MySQLi
MySQL Version : 5.0.67-community-log

any help?

https://vborg.vbsupport.ru/showpost.php?p=1748720&postcount=4320

Adromir
02-22-2009, 11:50 AM
Is there a way to show, how many chatters are in which channel online?

MotMann
02-22-2009, 12:01 PM
Thank You so much! Vielen Dank!
I'll uninstall the 2... version and take this one (I used this before but I didn't find the download link again!)

Dankbare Gr??e
Karin
1.5 works very nice :)

B?dde sch?n. Und klappt das?

entertain
02-22-2009, 12:06 PM
It seems that the chats in the collapsed chatbox won't be refreshed.

Can anybody reproduce this? ;)

brock.hutson
02-22-2009, 01:45 PM
when I click on smilies, help, archive, etc I get a page not found. The directory it is trying to access isn't correct. Its going to domain.com/forum/... I need it to not put the "forum" directory there (domain.com/...). When I upgraded to 3.8 I moved it form the forum directory to the public_html directory. It appears to be pulling that from somewhere else however. Any ideas?

kronnos
02-22-2009, 01:46 PM
Definitely getting the paid version as soon as the next release comes out:)!

Criminal-Minds
02-22-2009, 09:52 PM
Ive installed this product and everything works fine! However, It takes alittle to load up when I go to the page and or other threads on the site. Is there away to speed this up?

Mahar
02-23-2009, 12:17 AM
I've installed everything...and the admin cp options are all there but....it's not showing up on my forums at all. I've enabled it.

whitey1974
02-23-2009, 04:19 AM
Hi, I've been using this since my site was started. It's by far the best chatbox available imho....

Recently updated my Arcade to the latest version along with the latest version of this chat hack. And since then I cannot get the chatbox to display on the Arcade page or any other page except the forum pages. I've followed the instructions over and over with no joy, and like I say I've used this before without any problems at all, it was displaying on the arcade page with no problems.

I've looked through almost this entire thread and I've seen others having similar problems but haven't seen the solution to this yet.

Your help is greatly appreciated and thanks for your fine work :)

VBDev
02-23-2009, 05:39 AM
Oh ok, does this go for ALL of the chat imports or just the ones you specified?

Just the one specified, the other chats don't have a username/name column in the database so no issue :)

In the firefox error console I'm getting a number of errors. If I turn off all plugins errors go away, but if I enable just this plugin the errors come back.

Errors are as follows:

Warning: Error in parsing value for property 'width'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 9

Warning: Error in parsing value for property 'margin-left'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 14

Warning: Error in parsing value for property 'filter'. Declaration dropped.
Source File: http://www.myforum.com/forum/clientscript/mgc_cb_evo/widget-skin.css
Line: 24
And then a number of these:


Warning: Expected declaration but found '*'. Skipped to next declaration.
Source File: http://yui.yahooapis.com/combo?2.6.0/build/container/assets/skins/sam/container.css&2.6.0/build/button/assets/skins/sam/button.css
Line: 7

I'm using 2.2.1 and I have vbulletin 3.8.1.

These are css errors I think ? But not dependent of myself as this the yui internal css code.

Don't worry this won't stop your forum to stop working though.


- How do I get this into the navbar? (menu on the top of the site, control panel, search, log out etc..)


A link to the full page mode ?


- The icon beside the avatar, menu_open.gif is not showing, any idea? Its uploaded where its supposed to...

It's default within vBulletin, perhaps you don't have it in your style ?

I have a Database error if i Approve Posts...

Database error in vBulletin 3.8.0 Beta 2:

Invalid SQL:

INSERT INTO vbmgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1235133510,,'7422,Geb?udeabbruch Stufe 1 Bug',0,0,0,1,'thread',19);

MySQL Error : Fehler in der SQL-Syntax. Bitte die korrekte Syntax im Handbuch nachschlagen bei ''7422,Geb?udeabbruch Stufe 1 Bug',0,0,0,1,'thread',19)' in Zeile 4
Error Number : 1064
Request Date : Friday, February 20th 2009 @ 01:38:30 PM
Error Date : Friday, February 20th 2009 @ 01:38:30 PM
Script : http://forum.....de/inlinemod.php?threadid=7422&p=
Referrer : http://forum.....de/showthread.php?t=7422
IP Address : 217.226.218.56
Username : Indy
Classname : vB_Database
MySQL Version : 5.0.32-Debian_7etch8-log

Are you sure you are using last chatbox version 2.2.1 ? There was a bug is the first release of the 2.2.x (2.2.0 in fact).

Is there a way to change the color of the error message when submitting an empty chat. I barely saw the error message "Error: You must enter a chat !" because the text in just about the same color as the background. I think this goes for other error message I received.


I think I already gave that info to someone here in the thread, didn't I ?


Also, is there any way to change the username color so it shows each username in its respective color according to their user ranks.

Well I think it does as it retrieves username with the fetch_musername function using displaygroup as of where to get the username style.

VBDev
02-23-2009, 05:42 AM
Is there a way to sync this up with a forum? So anything posted in the chatbox will show up in a forum and vice-versa?

No there isn't.

Small request: To submit a chat in the main window uses either Enter or Okay as submit. Private Chat requires Okay and will not accept Enter key alone. Would love to see Private chat submission be consistant with standard chat. (Using IE)

Thanks!

This is in the request list, it needs some tweaks to the way popup is created with YUI, this is why it has not already done.

But it's in the todo list.

Hello!

Please, Please Fix the obproarcade Bug!

My User are very :mad::(:mad:

Thanks

cu Deta

I don't care if your users are :mad: or :( I do vB as free time as I already said so please be patient.

Your problem is in the bug list so wait till next release that's all !

the admincp mcg chatbox menu is in some other language. how do i do it in english?

You have to import the english language file as stated in the readme. And then just reload the admincp page.

VBDev
02-23-2009, 05:46 AM
Is there a way to show, how many chatters are in which channel online?

You mean the number of chatters per channel ? No it's not possible.

1.5 works very nice :)

B?dde sch?n. Und klappt das?

What the point of doing such post and especially to write it in german ??

This is not constructive...

It seems that the chats in the collapsed chatbox won't be refreshed.

Can anybody reproduce this? ;)

Nope can't reproduce in current development version.

when I click on smilies, help, archive, etc I get a page not found. The directory it is trying to access isn't correct. Its going to domain.com/forum/... I need it to not put the "forum" directory there (domain.com/...). When I upgraded to 3.8 I moved it form the forum directory to the public_html directory. It appears to be pulling that from somewhere else however. Any ideas?

I think you have not modified the bburl option of your forum when you moved it (it's very bad, you should fix it asap bud :)).

Ive installed this product and everything works fine! However, It takes alittle to load up when I go to the page and or other threads on the site. Is there away to speed this up?

What takes time ? The load of chats ?

VBDev
02-23-2009, 05:47 AM
I've installed everything...and the admin cp options are all there but....it's not showing up on my forums at all. I've enabled it.

And have you set usergroup permissions (as stated in the install readme file) ?

Hi, I've been using this since my site was started. It's by far the best chatbox available imho....

Recently updated my Arcade to the latest version along with the latest version of this chat hack. And since then I cannot get the chatbox to display on the Arcade page or any other page except the forum pages. I've followed the instructions over and over with no joy, and like I say I've used this before without any problems at all, it was displaying on the arcade page with no problems.

I've looked through almost this entire thread and I've seen others having similar problems but haven't seen the solution to this yet.

Your help is greatly appreciated and thanks for your fine work :)

See bug list ;)

whitey1974
02-23-2009, 05:52 AM
Ahh, my bad!!

Thanks for the prompt reply :D

NakedAlien
02-23-2009, 08:52 AM
The box on Admin CP is in french. At least it looks like french. How on earth did that happen :D I'd really like it to be in english, so I could understand something :P

Mahar
02-23-2009, 05:34 PM
NakedAlien, you'll have to install the language file stated in the readme.

Yes, I've set up permissions and everything, I got it to show up...but what exact folder am I supposed to upload the images to?

Skyrider
02-23-2009, 05:43 PM
Is there any way to ban guests from posting in the chat box? Like an IP ban. Or ban by cookie or something.

Adromir
02-23-2009, 05:55 PM
you can set it in the usergroup settings in ACP

VBDev
02-23-2009, 10:46 PM
Hello!

Please, Please Fix the obproarcade Bug!

My User are very :mad::(:mad:

Thanks

cu Deta


For those of you that are having problems making it work with IBProarcade, you have to add this lines in function_do_output :
global $mgc_cb_evo_var,$mgc_cb_evo;

instead of only :
global $mgc_cb_evo_var;

deta
02-24-2009, 04:13 AM
For those of you that are having problems making it work with IBProarcade, you have to add this lines in function_do_output :
global $mgc_cb_evo_var,$mgc_cb_evo;

instead of only :
global $mgc_cb_evo_var;

sorry nothing to display

VBDev
02-24-2009, 04:48 AM
I tested it with chatbox on every page under the navbar option and it works.

What's your configuration ?

VBDev
02-24-2009, 04:48 AM
Is there any way to ban guests from posting in the chat box? Like an IP ban. Or ban by cookie or something.

Nope there isn't.

whitey1974
02-24-2009, 05:36 AM
For those of you that are having problems making it work with IBProarcade, you have to add this lines in function_do_output :
global $mgc_cb_evo_var,$mgc_cb_evo;

instead of only :
global $mgc_cb_evo_var;


Sorry, this is what I have been doing as per the readme file in the download. I tried all sorts of variations, but with no joy.

For now I reverted back to version 0.5.0, but I'd love to get this version working. Good luck with it, you're doing a fine job....definately the best chatbox available ;)

cleverone
02-24-2009, 06:21 AM
I have installed and most features work correctly.

There are a few option areas that come up blank when I try to manage them in the admincp. They are Manage commands, Manage channels, View logs, Import scripts, Counters update.

My main issue is the manage commands. I'm unable to use any commands (Ex. /me, /slap etc.). I have checked all permissions and options available and nothing works. Like I said the command manager is blank for me, so I imagine my problem revolves around that some how.

I installed files in main public ftp area, images to main style, and imported product and lang.

I'm using version 3.8.1 and I installed the newest version of the chatbox available.

I also have an image resizer mod installed, when the chatbox refreshes it tweaks out the resized image every refresh. How do I keep this from happening so its smooth and images are resized when to big? The resize program I'm using is nCode.

Thanks for the help!

deta
02-24-2009, 07:14 AM
I tested it with chatbox on every page under the navbar option and it works.

What's your configuration ?

Hello!

That is the same configuration. It is nothing to Display on IBProarcade.

cu Deta

VBDev
02-24-2009, 10:13 AM
Sorry, this is what I have been doing as per the readme file in the download. I tried all sorts of variations, but with no joy.

For now I reverted back to version 0.5.0, but I'd love to get this version working. Good luck with it, you're doing a fine job....definately the best chatbox available ;)

Hello!

That is the same configuration. It is nothing to Display on IBProarcade.

cu Deta

Well that's strange because I tested it yesterday evening and it was working just fine.
Do you have anything specific in your arcade or chatbox configuration (both of you) ?

I have installed and most features work correctly.

There are a few option areas that come up blank when I try to manage them in the admincp. They are Manage commands, Manage channels, View logs, Import scripts, Counters update.

My main issue is the manage commands. I'm unable to use any commands (Ex. /me, /slap etc.). I have checked all permissions and options available and nothing works. Like I said the command manager is blank for me, so I imagine my problem revolves around that some how.

I installed files in main public ftp area, images to main style, and imported product and lang.

I'm using version 3.8.1 and I installed the newest version of the chatbox available.


Well it's working fine for me. You have uploaded the mgc_cb_evo.php file contained in the admincp directory of the files to upload ?


I also have an image resizer mod installed, when the chatbox refreshes it tweaks out the resized image every refresh. How do I keep this from happening so its smooth and images are resized when to big? The resize program I'm using is nCode.


Is it TTCATD image resizer ? If this is the case, don't use slimbox as image resizing if you have the chatbox installed.

deta
02-24-2009, 10:32 AM
Well that's strange because I tested it yesterday evening and it was working just fine.
Do you have anything specific in your arcade or chatbox configuration (both of you) ?


No, nothing specific in arcade or chatbox.

I change only the funktion.php from ibproarcade

function do_output($output_array)

{

global $DB, $ibforums, $arcade, $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;

global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits;

global $languagechooserbits, $spacer_open, $spacer_close, $vbulletin, $navbar, $footer;

global $template_hook, $notifications_menubits, $notifications_total, $notices, $ad_location;

global $mgc_cb_evo_var;

global $vba_options;

// add additional needed variables here

cu deta

VBDev
02-24-2009, 02:58 PM
Yes and you don't have the modification I stated, you have to add after $mgc_cb_evo_var

that :
,$mgc_cb_evo

Line will then be : global $mgc_cb_evo_var,$mgc_cb_evo;

deta
02-24-2009, 04:06 PM
Yes and you don't have the modification I stated, you have to add after $mgc_cb_evo_var

that :
,$mgc_cb_evo

Line will then be : global $mgc_cb_evo_var,$mgc_cb_evo;


Its the same, nothing in the Ibproarcade ..

function do_output($output_array)
{
global $DB, $ibforums, $arcade, $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;
global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits;
global $languagechooserbits, $spacer_open, $spacer_close, $vbulletin, $navbar, $footer;
global $template_hook, $notifications_menubits, $notifications_total, $notices, $ad_location;
global $mgc_cb_evo_var, $mgc_cb_evo;
global $vba_options;

VBDev
02-24-2009, 05:35 PM
I tested it and it works so you must have something specific on your forum or you are mistaking.

Send my ftp access and admin access by PM.

Redzzand
02-24-2009, 07:14 PM
awesome chat, but my users say they have to manually refresh chatbox because it lags... how can i adjust the auto refresh rate? i want to set it to every 5secs.

VBDev
02-24-2009, 07:49 PM
In usergroup permissions :)

Redzzand
02-24-2009, 08:55 PM
thanks found it after i made the post! but now i think there's is a problem with the AJAX refresh...

for some reason the actual chat stops refreshing... users have to manually hit F5 to refresh chat. You still see AJAX refreshing but the chat never actually scrolls until u collapse chatbox or refresh whole page

Can you check it out? Its really hard to explain what it does....

site: www.RGVimports.com
user: Tiburon
pass: test123

VBDev
02-24-2009, 09:08 PM
thanks found it after i made the post! but now i think there's is a problem with the AJAX refresh...

for some reason the actual chat stops refreshing... users have to manually hit F5 to refresh chat. You still see AJAX refreshing but the chat never actually scrolls until u collapse chatbox or refresh whole page

Can you check it out? Its really hard to explain what it does....

site: www.RGVimports.com (http://www.RGVimports.com)
user: Tiburon
pass: test123

Might be due to a current javascript known error.

This shall be fixed in the next version.

cleverone
02-25-2009, 09:40 AM
I uninstalled the chat box... but the permission boxes are still in each of the usergroups... How do I remove them?

cleverone
02-25-2009, 09:49 AM
n/m... there were a few items still lingering around with the files uploaded.. thanks anyways!

Ranger187
02-25-2009, 11:43 AM
n/m... there were a few items still lingering around with the files uploaded.. thanks anyways!

Because you didn't read the readme which tells you how to uninstall it avoiding this. ;)

ispots
02-25-2009, 01:34 PM
Hey vbDev....I can reproduce this error on my site anytime you want:

SQL error in thread/post notification when moving a thread (Can't be reproduced)

The only way I can copy a thread or move posts is to go into admin first and turn off the new thread notification in the chatbox.

Redzzand
02-25-2009, 01:49 PM
Might be due to a current javascript known error.

This shall be fixed in the next version.

Oh ok, well what i did was decrease the auto refresh rate to about 7seconds and now the chatbox works way better. I also disabled inactive mode. I believe most of the functions are now working properly!

thanks again for this mod.

Feature Request
* Disable sound button
* Add actual Channel name next to channel icon or Channel Drop down

OblivionMage
02-25-2009, 06:51 PM
Ack, I still can't figure out how to get it to show up on my board

The only errors I get (tried different styles) in FF error console are:

-md5hash not defined
-Some sort of a Skype error (if (str.charAt(i).match(/[^;=!@#$%^&*()_+/\\ ,.~`\"|:-]/)) break;)

Which are present regardless of hooks

>.<

VBDev
02-25-2009, 07:43 PM
Hey vbDev....I can reproduce this error on my site anytime you want:

The only way I can copy a thread or move posts is to go into admin first and turn off the new thread notification in the chatbox.

With 2.2.1 or 2.2.0 ?

Oh ok, well what i did was decrease the auto refresh rate to about 7seconds and now the chatbox works way better. I also disabled inactive mode. I believe most of the functions are now working properly!

thanks again for this mod.

Feature Request
* Disable sound button
* Add actual Channel name next to channel icon or Channel Drop down

You mean a temporarly disable sound ? In addition to the one in the usercp ?

Channel name can be shown in the chatbox header, there is an option for that.

Ack, I still can't figure out how to get it to show up on my board

The only errors I get (tried different styles) in FF error console are:

-md5hash not defined
-Some sort of a Skype error (if (str.charAt(i).match(/[^;=!@#$%^&*()_+/\\ ,.~`\"|:-]/)) break;)Which are present regardless of hooks

>.<

These are not chatbox issues, the issue might come from your style not being uptodate ?

But you should rather ask that to vB support coz this ain't chatbox issue.

ispots
02-25-2009, 08:33 PM
With 2.2.1 or 2.2.0 ?

Damnit...didn't know there was a 2.2.1....I just updated like 3 days ago!

I'll let you know after I update again.

OblivionMage
02-25-2009, 08:34 PM
I reinstalled the chatbox (I'll try doing that again) and its not a specific style (doesn't work on default with all other hooks disabled).

NEway, thanks for the fast help ^^

((Yeah I know the errors aren't chatbox issues, sorry if that was misleading. I just posted them b.c I think you asked if there were any console errors from FF earlier))

Celebutopia
02-25-2009, 10:02 PM
I tried installing this and all I kept getting where db errors that stated the following:

Database error in vBulletin 3.8.1:

Invalid SQL:

SELECT
userfield.*, usertextfield.*, user.*, UNIX_TIMESTAMP(passworddate) AS passworddate, user.languageid AS saved_languageid,
IF(displaygroupid=0, user.usergroupid, displaygroupid) AS displaygroupid,
language.phrasegroup_global AS phrasegroup_global,
language.phrasegroup_posting AS phrasegroup_posting,
language.phrasegroup_postbit AS phrasegroup_postbit,
language.phrasegroup_showthread AS phrasegroup_showthread,
language.phrasegroup_inlinemod AS phrasegroup_inlinemod,
language.phrasegroup_reputationlevel AS phrasegroup_reputationlevel,
language.options AS lang_options,
language.languagecode AS lang_code,
language.charset AS lang_charset,
language.locale AS lang_locale,
language.imagesoverride AS lang_imagesoverride,
language.dateoverride AS lang_dateoverride,
language.timeoverride AS lang_timeoverride,
language.registereddateoverride AS lang_registereddateoverride,
language.calformat1override AS lang_calformat1override,
language.calformat2override AS lang_calformat2override,
language.logdateoverride AS lang_logdateoverride,
language.decimalsep AS lang_decimalsep,
language.thousandsep AS lang_thousandsep
,mgcugp.mgc_cb_evo_default_color,mgcugp.mgc_cb_evo _chanid
FROM user AS user
LEFT JOIN userfield AS userfield ON (user.userid = userfield.userid)
LEFT JOIN usertextfield AS usertextfield ON (usertextfield.userid = user.userid) LEFT JOIN language AS language ON (language.languageid = IF(user.languageid = 0, 1, user.languageid))
LEFT JOIN usergroup AS mgcugp ON (user.usergroupid=mgcugp.usergroupid)
WHERE user.userid = 13061;

MySQL Error : Unknown column 'mgcugp.mgc_cb_evo_default_color' in 'field list'

Can someone please help. Thanks!

VBDev
02-25-2009, 11:00 PM
Damnit...didn't know there was a 2.2.1....I just updated like 3 days ago!

I'll let you know after I update again.

Ah ah the 2.2.1 was released 1 day after the 2.2.0.

I reinstalled the chatbox (I'll try doing that again) and its not a specific style (doesn't work on default with all other hooks disabled).

NEway, thanks for the fast help ^^


((Yeah I know the errors aren't chatbox issues, sorry if that was misleading. I just posted them b.c I think you asked if there were any console errors from FF earlier))

Oh yes my bad :) Anyway do you still get that error with default style ?

I tried installing this and all I kept getting where db errors that stated the following:

Database error in vBulletin 3.8.1:

Invalid SQL:

SELECT
userfield.*, usertextfield.*, user.*, UNIX_TIMESTAMP(passworddate) AS passworddate, user.languageid AS saved_languageid,
IF(displaygroupid=0, user.usergroupid, displaygroupid) AS displaygroupid,
language.phrasegroup_global AS phrasegroup_global,
language.phrasegroup_posting AS phrasegroup_posting,
language.phrasegroup_postbit AS phrasegroup_postbit,
language.phrasegroup_showthread AS phrasegroup_showthread,
language.phrasegroup_inlinemod AS phrasegroup_inlinemod,
language.phrasegroup_reputationlevel AS phrasegroup_reputationlevel,
language.options AS lang_options,
language.languagecode AS lang_code,
language.charset AS lang_charset,
language.locale AS lang_locale,
language.imagesoverride AS lang_imagesoverride,
language.dateoverride AS lang_dateoverride,
language.timeoverride AS lang_timeoverride,
language.registereddateoverride AS lang_registereddateoverride,
language.calformat1override AS lang_calformat1override,
language.calformat2override AS lang_calformat2override,
language.logdateoverride AS lang_logdateoverride,
language.decimalsep AS lang_decimalsep,
language.thousandsep AS lang_thousandsep
,mgcugp.mgc_cb_evo_default_color,mgcugp.mgc_cb_evo _chanid
FROM user AS user
LEFT JOIN userfield AS userfield ON (user.userid = userfield.userid)
LEFT JOIN usertextfield AS usertextfield ON (usertextfield.userid = user.userid) LEFT JOIN language AS language ON (language.languageid = IF(user.languageid = 0, 1, user.languageid))
LEFT JOIN usergroup AS mgcugp ON (user.usergroupid=mgcugp.usergroupid)
WHERE user.userid = 13061;

MySQL Error : Unknown column 'mgcugp.mgc_cb_evo_default_color' in 'field list'Can someone please help. Thanks!

Where you having a previous version of the chatbox ?

Mr. Baws
02-26-2009, 03:47 PM
I get this error when i try to move threads/posts (2.2.1)

Database error in vBulletin 3.8.1:

Invalid SQL:

INSERT INTO mgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1235667822,,'11491,test',0,0,0,1,'thread',119);

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''11491,test',0,0,0,1,'thread',119)' at line 4
Error Number : 1064
Request Date : Thursday, February 26th 2009 @ 05:03:42 PM
Error Date : Thursday, February 26th 2009 @ 05:03:42 PM
Script : http://www.myboard.com/inlinemod.php?do=domoveposts&t=2129&postids=202414
Referrer : http://www.myboard.com/inlinemod.php?threadid=2129&p=
IP Address : 78.2.XXX.XX
Username : XXXXXXXX
Classname : vB_Database
MySQL Version : 5.0.67-community

VBDev
02-26-2009, 07:02 PM
How are you moving threads/post ?

Coz I tried and didn't experienced it.

desirulez
02-26-2009, 08:48 PM
im getting a database error because of this hack whenever i try to save something in usergroup i get this error i been uninsalled MGC CHATBOX

Database error in vBulletin 3.8.1:

Invalid SQL:
UPDATE usergroup SET

### UPDATE QUERY GENERATED BY fetch_query_sql() ###
`title` = 'dR Girls',
`description` = '',
`usertitle` = 'dR Girls',
`opentag` = '<span style=\"color:#FF00FF\" title=\"dR Girls\"><b><dark>',
`closetag` = '</span>',
`passwordexpires` = '0',
`passwordhistory` = '0',
`ispublicgroup` = '0',
`canoverride` = '0',
`hhroptions` = '0',
`trgpermissions` = '0',
`forumpermissions` = '12316919',
`genericpermissions` = '1544034179',
`attachlimit` = '1000000',
`pmquota` = '100',
`pmpermissions` = '1',
`pmsendmax` = '5',
`pmthrottlequantity` = '0',
`calendarpermissions` = '17',
`wolpermissions` = '1',
`adminpermissions` = '0',
`genericpermissions2` = '1',
`genericoptions` = '41',
`profilepicmaxwidth` = '150',
`profilepicmaxheight` = '100',
`profilepicmaxsize` = '25000',
`avatarmaxwidth` = '50',
`avatarmaxheight` = '50',
`avatarmaxsize` = '20000',
`signaturepermissions` = '245759',
`sigpicmaxwidth` = '0',
`sigpicmaxheight` = '0',
`sigpicmaxsize` = '0',
`sigmaxrawchars` = '0',
`sigmaxchars` = '0',
`sigmaxlines` = '0',
`sigmaxsizebbcode` = '7',
`sigmaximages` = '5',
`albumpermissions` = '0',
`albumpicmaxwidth` = '0',
`albumpicmaxheight` = '0',
`albumpicmaxsize` = '0',
`albummaxpics` = '0',
`albummaxsize` = '0',
`usercsspermissions` = '63',
`visitormessagepermissions` = '23',
`socialgrouppermissions` = '50903',
`maximumsocialgroups` = '5',
`groupiconmaxsize` = '25000',
`mgc_cb_evo_permissions` = '0',
`mgc_cb_evo_nbmsg_show` = '',
`mgc_cb_evo_nbmsg_perday_show` = ''
WHERE usergroupid=14;

MySQL Error : Unknown column 'mgc_cb_evo_permissions' in 'field list'
Error Number : 1054

VBDev
02-26-2009, 09:09 PM
Well as I have said many times : read the uninstall instructions !!

RedGTiVR6
02-26-2009, 11:24 PM
I'm sure this has been covered before, but with 293 pages, it's a little hard to keep up!

I've got this installed with no problems currently other than the fact that a number of the settings are still showing up in French. Any ideas how I can fix this?

I made sure to upload the English language.xml

Any help would be greatly appreciated!

Also, I've noticed that the time isn't showing up correctly.

For instance, right now it's 7:33 PM, but the time is showing up as 7:1 PM on the Chat box. One other minor bug, the version still states 2.2.0 in the bottom of the chat box, even though it's listed as 2.2.1 in the products in the AdminCP.

fukdawrld
02-27-2009, 02:59 AM
I have 2 issues:

Ok i have a very strange problem. It seems whatever display order I have my chats on is opposite for registered users. If i have it set to "newest first" my admins, mods, supermod, all see it as newest first...but my registered users see it as oldest first???? Any Ideas?


The other has been asked in this thread a few times but with no clear answers:

UPDATE #2:
-----------

So the problem is actually that the variable $stylevar['imgdir_misc'] is getting URLencoded before vB does whatever replacements it needs to do. Or at least whatever string is including that variable for the image output is getting URLENCODED too soon. Again, I don't know where this is happening, but I'm trying to figure it out.

UPDATE
-------

Ok, I found the exact cause now, it's my custom theme. It has a custom variable called {IF} (Images Folder) which translates to "%7BIF%7D" when it's URLDECODED. So somewhere within this mod I'd guess that it needs to check/process the replacement variables when building the images folder variable ($stylevar['imgdir_misc']). I have no idea where that might be or how to do it though.

------------
Ok, I found what the problem is, just not a solution yet.

I searched this thread and found one other person with the problem, although no solution was posted.

The problem is, somewhere the text "%7BIF%7D" is getting inserted into the image URL paths. I've done some searches and cannot find this text anywhere.




I"m having this exact same issue..how would i go about fixing this.

Ranger187
02-27-2009, 04:44 AM
Me of all people should know, but VBDev or whomever, is there a resizer so if images are posted, it restricts them to a certain size (settable by usergroup) or whatever?

VBDev
02-27-2009, 05:40 AM
I'm sure this has been covered before, but with 293 pages, it's a little hard to keep up!


Yeah I know, the bigger the thread become, the harder to follow it is.


I've got this installed with no problems currently other than the fact that a number of the settings are still showing up in French. Any ideas how I can fix this?

I made sure to upload the English language.xml


These are settings content not phrases so that's normal.

You have to put your own text in those boxes.

In the next release I'll attach the translation of the default values so that you users can work less haha.


Also, I've noticed that the time isn't showing up correctly.

For instance, right now it's 7:33 PM, but the time is showing up as 7:1 PM on the Chat box. One other minor bug, the version still states 2.2.0 in the bottom of the chat box, even though it's listed as 2.2.1 in the products in the AdminCP.

Time is showing correctly for me, have you changed the timeformat option of the chatbox ?

Yeah I know I forgot to change the version in the chatbox, but no biggie :)


Ok i have a very strange problem. It seems whatever display order I have my chats on is opposite for registered users. If i have it set to "newest first" my admins, mods, supermod, all see it as newest first...but my registered users see it as oldest first???? Any Ideas?


You are using same browser as your users ? That's not really possible.


The other has been asked in this thread a few times but with no clear answers:

I"m having this exact same issue..how would i go about fixing this.

The problem with that is that I don't know how that {IF} thing is parsed.
Is it a custom variable or something coming along with a plugin ?

Me of all people should know, but VBDev or whomever, is there a resizer so if images are posted, it restricts them to a certain size (settable by usergroup) or whatever?

For the chatbox ? No there aren't any.
It's based on bbcodes vB parsing method so if you have one for your posts and so on, I suppose it should be active for chatbox too.

ispots
02-27-2009, 03:11 PM
Ah ah the 2.2.1 was released 1 day after the 2.2.0.

Did you forget to update the copyright information at the bottom for 2.2.1? I have updated to 2.2.1 twice now and the tag at the bottom still says that it's 2.2.0.

My product version in the admin says 2.2.1, just not the front page.

VBDev
02-27-2009, 03:18 PM
YEs I did :D

Switch02
02-27-2009, 03:20 PM
Hi, thanks for this mod maybe i'll try it because inferno doesn't support the 3.8

fukdawrld
02-27-2009, 04:07 PM
Yeah I know, the bigger the thread become, the harder to follow it is.



These are settings content not phrases so that's normal.

You have to put your own text in those boxes.

In the next release I'll attach the translation of the default values so that you users can work less haha.



Time is showing correctly for me, have you changed the timeformat option of the chatbox ?

Yeah I know I forgot to change the version in the chatbox, but no biggie :)



You are using same browser as your users ? That's not really possible.



The problem with that is that I don't know how that {IF} thing is parsed.
Is it a custom variable or something coming along with a plugin ?



For the chatbox ? No there aren't any.
It's based on bbcodes vB parsing method so if you have one for your posts and so on, I suppose it should be active for chatbox too.





When i test my board I test it in several browsers and they all come up the same...registered user see whatever is opposite to the settings. [I.E., firefox, chrome, and opera]

How do I check on the if thing {IF}

Instead of seeing the images i see submit query and the image url is forum/{IF}/misc/menu_open.gif

gmerin
02-27-2009, 08:07 PM
would it be possible to add replacement variables within the chatbox?

citizenkane
02-27-2009, 10:46 PM
thanks men

beatthecasino
02-28-2009, 01:05 AM
I Installled the latest version on VB 3.8.0 It looks ok except it endlessly says loading...and shows the progress.gif

If i try to enter a chat it says in an error box

Error : A chat is already being processed, please wait.

Any Ideas?

Thanks
KS

desirulez
02-28-2009, 04:04 AM
Well as I have said many times : read the uninstall instructions !!

looks like you are not going to help

punk23
02-28-2009, 09:14 AM
Excellent Mod :)

I will purchase the branding free option if someone can tell me how I achieve the following....

I need it so that just the chatbox gets launched in its own window (without anything else - no forum header, logo, navbar or other VB stuff), say 640x300px in size, via a single link to launch it.

kronnos
02-28-2009, 09:34 AM
looks like you are not going to help

I think he already did by pointing you in the right direction.

lille L
02-28-2009, 10:27 AM
VBDev: Yes a link to the full page mode ;)

Hm, I have it, and its uploaded. I wil get a new try

But.. In the online window, its only showing whos online a short time after they logged in. Is there any way to get the box to show whos online all the time? And everyone whos watching the box also incl?

I wonder if my styles dont like this, because it looks far away from your screenshoots.. :)

VBDev
02-28-2009, 11:46 AM
When i test my board I test it in several browsers and they all come up the same...registered user see whatever is opposite to the settings. [I.E., firefox, chrome, and opera]

How do I check on the if thing {IF}

Instead of seeing the images i see submit query and the image url is forum/{IF}/misc/menu_open.gif

Well I don't know, is that something particular that {IF} thing ?

Is this default vB possiblity ?

would it be possible to add replacement variables within the chatbox?

Well what do you need it for ?

I Installled the latest version on VB 3.8.0 It looks ok except it endlessly says loading...and shows the progress.gif

If i try to enter a chat it says in an error box

Error : A chat is already being processed, please wait.

Any Ideas?

Thanks
KS

There are issues with vB if you have zlib compression on your website. Do you have that active ?

looks like you are not going to help

Well have you even had a look at the uninstall instructions ? You have this issue because you have not removed the files of the chatbox prior to the uninstall ;)

So just remove the chatbox files, especially the one in includes/xml directory, then you should be fixed.

VBDev
02-28-2009, 12:03 PM
Excellent Mod :)

I will purchase the branding free option if someone can tell me how I achieve the following....

I need it so that just the chatbox gets launched in its own window (without anything else - no forum header, logo, navbar or other VB stuff), say 640x300px in size, via a single link to launch it.

I think you could achieve this pretty easily.

Open the mgc_cb_evo.php file, search for :

/* Chatbox display in full mode */
if ($_REQUEST['do'] == "view_chatbox")
{
/* The user can't view the chatbox or full mode is not yet enabled ? */
if (!can_view_mgc_cb_evo() || !$vbulletin->options['mgc_cb_evo_fullmode_active'])
{
print_no_permission();
}

$HTML = build_mgc_cb_evo_display($vbulletin->options['mgc_cb_evo_fullmode_height']);

$navbits = array();
// change the line below to contain whatever you want to show in the navbar (title of your custom page)
$navbits[$parent] = $vbulletin->options['mgc_cb_evo_title'];

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

// change the line below to contain the name of the actual main output template used in your script
eval('print_output("' . fetch_template('GENERIC_SHELL') . '");');
}


Here you should change that to :

/* Chatbox display in full mode */
if ($_REQUEST['do'] == "view_chatbox")
{
/* The user can't view the chatbox or full mode is not yet enabled ? */
if (!can_view_mgc_cb_evo() || !$vbulletin->options['mgc_cb_evo_fullmode_active'])
{
print_no_permission();
}

$HTML = build_mgc_cb_evo_display($vbulletin->options['mgc_cb_evo_fullmode_height']);

// change the line below to contain the name of the actual main output template used in your script
eval('print_output("' . fetch_template('mgc_cb_evo_page') . '");');
}


Then at the top of the file, add mgc_cb_evo_page in the globaltemplates var, it should look like :

$globaltemplates = array(
'GENERIC_SHELL',
'mgc_cb_evo_archives',
'mgc_cb_evo_static_chatbit',
'mgc_chatbox_archives_nobit',
'mgc_cb_evo_channel_button',
'mgc_cb_evo',
'mgc_cb_evo_editor',
'mgc_cb_evo_chatbit',
'mgc_cb_evo_chatbit_menu',
'editor_jsoptions_font',
'editor_jsoptions_size',
'mgc_cb_evo_help',
'mgc_cb_evo_help_bit',
'mgc_cb_evo_smilies',
'mgc_cb_evo_rules',
'mgc_cb_evo_table',
'mgc_cb_evo_table_bit',
'mgc_cb_evo_search',
'mgc_cb_evo_page'
);


Then edit the clientscript/mgc_cb_evo/mgc_cb_evo_functions.js file append to it :

function open_chatbox_window()
{
window.open(bburl + "/mgc_cb_evo.php?" + SESSIONURL + "do=view_chatbox" , "view_chatbox", "toolbar=no,scrollbars=yes,resizable=yes,left=0 top=0,width=640,height=480");
return false;
}


Last step is to edit the mgc_cb_evo_editor template, search for :

<if condition="$vbulletin->options[mgc_cb_evo_fullmode_active] && THIS_SCRIPT != 'mgc_cb_evo'">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_link_topopup]">
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_blank"><img class="inlineimg" id="mgc_cb_evo_fullmode" title="$vbphrase[mgc_cb_evo_fullmode]" src="$stylevar[imgdir_misc]/mgc_cb_evo/mgc_cb_evo_full.gif" alt="$vbphrase[mgc_cb_evo_fullmode]" border="0" /></a>
<else />
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_top"><img class="inlineimg" id="mgc_cb_evo_fullmode" title="$vbphrase[mgc_cb_evo_fullmode]" src="$stylevar[imgdir_misc]/mgc_cb_evo/mgc_cb_evo_full.gif" alt="$vbphrase[mgc_cb_evo_fullmode]" border="0" /></a>
</if>
</if>


In the two links of that bit of code add before the end of the opening <a tag add :

onclick="return open_chatbox_window();"


I have not tested but this should work !

If it does I perhaps would implement that in the next version.

Don't forget to activate the chatbox in full mode option.

VBDev
02-28-2009, 12:07 PM
VBDev: Yes a link to the full page mode ;)

Hm, I have it, and its uploaded. I wil get a new try

But.. In the online window, its only showing whos online a short time after they logged in. Is there any way to get the box to show whos online all the time? And everyone whos watching the box also incl?

I wonder if my styles dont like this, because it looks far away from your screenshoots.. :)

Full page mode link is : mgc_cb_evo.php?do=view_chatbox.

I haven't understood what you mean in your online issue thing.

punk23
02-28-2009, 12:28 PM
I think you could achieve this pretty easily.

Open the mgc_cb_evo.php file, search for :

/* Chatbox display in full mode */
if ($_REQUEST['do'] == "view_chatbox")
{
/* The user can't view the chatbox or full mode is not yet enabled ? */
if (!can_view_mgc_cb_evo() || !$vbulletin->options['mgc_cb_evo_fullmode_active'])
{
print_no_permission();
}

$HTML = build_mgc_cb_evo_display($vbulletin->options['mgc_cb_evo_fullmode_height']);

$navbits = array();
// change the line below to contain whatever you want to show in the navbar (title of your custom page)
$navbits[$parent] = $vbulletin->options['mgc_cb_evo_title'];

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

// change the line below to contain the name of the actual main output template used in your script
eval('print_output("' . fetch_template('GENERIC_SHELL') . '");');
}


Here you should change that to :

/* Chatbox display in full mode */
if ($_REQUEST['do'] == "view_chatbox")
{
/* The user can't view the chatbox or full mode is not yet enabled ? */
if (!can_view_mgc_cb_evo() || !$vbulletin->options['mgc_cb_evo_fullmode_active'])
{
print_no_permission();
}

$HTML = build_mgc_cb_evo_display($vbulletin->options['mgc_cb_evo_fullmode_height']);

// change the line below to contain the name of the actual main output template used in your script
eval('print_output("' . fetch_template('mgc_cb_evo_page') . '");');
}


Then at the top of the file, add mgc_cb_evo_page in the globaltemplates var, it should look like :

$globaltemplates = array(
'GENERIC_SHELL',
'mgc_cb_evo_archives',
'mgc_cb_evo_static_chatbit',
'mgc_chatbox_archives_nobit',
'mgc_cb_evo_channel_button',
'mgc_cb_evo',
'mgc_cb_evo_editor',
'mgc_cb_evo_chatbit',
'mgc_cb_evo_chatbit_menu',
'editor_jsoptions_font',
'editor_jsoptions_size',
'mgc_cb_evo_help',
'mgc_cb_evo_help_bit',
'mgc_cb_evo_smilies',
'mgc_cb_evo_rules',
'mgc_cb_evo_table',
'mgc_cb_evo_table_bit',
'mgc_cb_evo_search',
'mgc_cb_evo_page'
);


Then edit the clientscript/mgc_cb_evo/mgc_cb_evo_functions.js file append to it :

function open_chatbox_window()
{
window.open(bburl + "/mgc_cb_evo.php?" + SESSIONURL + "do=view_chatbox" , "view_chatbox", "toolbar=no,scrollbars=yes,resizable=yes,left=0 top=0,width=640,height=480");
return false;
}


Last step is to edit the mgc_cb_evo_editor template, search for :

<if condition="$vbulletin->options[mgc_cb_evo_fullmode_active] && THIS_SCRIPT != 'mgc_cb_evo'">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_link_topopup]">
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_blank"><img class="inlineimg" id="mgc_cb_evo_fullmode" title="$vbphrase[mgc_cb_evo_fullmode]" src="$stylevar[imgdir_misc]/mgc_cb_evo/mgc_cb_evo_full.gif" alt="$vbphrase[mgc_cb_evo_fullmode]" border="0" /></a>
<else />
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_top"><img class="inlineimg" id="mgc_cb_evo_fullmode" title="$vbphrase[mgc_cb_evo_fullmode]" src="$stylevar[imgdir_misc]/mgc_cb_evo/mgc_cb_evo_full.gif" alt="$vbphrase[mgc_cb_evo_fullmode]" border="0" /></a>
</if>
</if>


In the two links of that bit of code add before the end of the opening <a tag add :

onclick="return open_chatbox_window();"


I have not tested but this should work !

If it does I perhaps would implement that in the next version.

Don't forget to activate the chatbox in full mode option.

Fantastic (and I'll keep my promise about buying the branding free when this is finished).

Only problem I have is that it DOES open the right sized popup window but it's blank at the moment...what did I miss :P

VBDev
02-28-2009, 01:33 PM
Lol I forgot a step :D

Create a template called mgc_cb_evo_page, and in the content copy the content of the GENERIC_SHELL template and remove the things you don't need like navbar and so on.

fukdawrld
02-28-2009, 02:19 PM
Well I don't know, is that something particular that {IF} thing ?

Is this default vB possiblity ?






Yes It is a replacement variable {IF} = voodoo/images

When I erase it it removes many other images from my site. Is there away around this?

punk23
02-28-2009, 02:31 PM
Lol I forgot a step :D

Create a template called mgc_cb_evo_page, and in the content copy the content of the GENERIC_SHELL template and remove the things you don't need like navbar and so on.
That's great!

I am trying to set this up with a button on my homepage. Whilst it does actually launch, it doesn't open that cool little window, it opens a full page tab. Please could you tell me if this code is all I need to paste? BTW - the window launches perfectly from the actual chat box.
<if condition="is_member_of($vbulletin->userinfo, 6,7,5,73)">
<div align="center">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_active] && THIS_SCRIPT != 'mgc_cb_evo'">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_link_topopup]">
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_blank"><img src="images/buttons/staff-chat.gif" width="160" height="33" border="0" onclick="return open_chatbox_window();"/></a>
<else />
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_top"><img src="images/buttons/staff-chat.gif" width="160" height="33" border="0" onclick="return open_chatbox_window();"/></a>
</if><br />
</if></if>
...because I have tried it and just get the full tabbed window every time :(

Thank you.

VBDev
02-28-2009, 03:57 PM
You have to put the onclick in the tag a not the tag img

punk23
02-28-2009, 04:09 PM
Ok, thank you.

So I am using this code now
<if condition="is_member_of($vbulletin->userinfo, 6,7,5,73)">
<div align="center">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_active] && THIS_SCRIPT != 'mgc_cb_evo'">
<if condition="$vbulletin->options[mgc_cb_evo_fullmode_link_topopup]">
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_blank" onclick="return open_chatbox_window();"><img src="images/buttons/staff-chat.gif" width="160" height="33" border="0"/></a>
<else />
<a href="mgc_cb_evo.php?$session[sessionurl]do=view_chatbox" target="_top" onclick="return open_chatbox_window();"><img src="images/buttons/staff-chat.gif" width="160" height="33" border="0"/></a>
</if>
</if></if></div>
But it's still opening up in a new tab :(

Just re-tested it - FF3 opens new tab & IE7 opens FULL SIZE new window.

VBDev
02-28-2009, 08:06 PM
If you are on a page where the chatbox is, I think it's opening in a popup no ?

Markos
02-28-2009, 08:21 PM
hi dev i don't know if this is a bug but now and then my chat box locks on refresh and it doesn't refresh unless u refresh the full forum

inclosecombat13
02-28-2009, 10:09 PM
Hi guys, never had to do this before, but the Chatbox and admincp settings are coming up with another language, i know ive got to install "English", but where, and how.

I tried "Import Language" but when i do i get...

The file you attempted to import only contains phrases and none of the settings required. You will be unable to make a new language with this file.


Any Help will be greatly recieved :)

Nick

punk23
02-28-2009, 10:14 PM
If you are on a page where the chatbox is, I think it's opening in a popup no ?
Yes, on a page where the chatbox exists it does. I need it to open that small box from a page where the chatbox is not displayed :)

beatthecasino
02-28-2009, 10:15 PM
There are issues with vB if you have zlib compression on your website. Do you have that active ?

No I don't have that enabled

VBDev
02-28-2009, 11:00 PM
hi dev i don't know if this is a bug but now and then my chat box locks on refresh and it doesn't refresh unless u refresh the full forum

Yeah I know that, it's fixed in the next release.

Hi guys, never had to do this before, but the Chatbox and admincp settings are coming up with another language, i know ive got to install "English", but where, and how.

I tried "Import Language" but when i do i get...

The file you attempted to import only contains phrases and none of the settings required. You will be unable to make a new language with this file.
Any Help will be greatly recieved :)

Nick

Had you set it to overwrite language file as stated in the install instructions ?

Yes, on a page where the chatbox exists it does. I need it to open that small box from a page where the chatbox is not displayed :)

Then you have to add, in the template of the page where you want to add your opening button, the bit of code (function open bla bla bla) between javascript declaration tag :

<script type="text/javascript">
Put the code here
</script>


There are issues with vB if you have zlib compression on your website. Do you have that active ?

No I don't have that enabled

Have you applied all fixes stated in the thread near the bugs ?
Also try putting the load YUI files from local server to yes.

If after fixing them you are still having the issue then please send me by pm URL to your forum.

Markos
02-28-2009, 11:50 PM
Yeah I know that, it's fixed in the next release.

thanks for getting back to me :)

fukdawrld
03-01-2009, 01:45 AM
You have to put the onclick in the tag a not the tag img

Is this directed towards me? If so can u be more specific..I'm not to good with this.

Thanks so much for your help

OblivionMage
03-01-2009, 04:21 AM
The errors / warnings in FF error console are present regardless of hooks used, and aren't present when the default style is used (which should also show the chatbox), so they aren't important.

Gah, I uninstalled (deleted files and images, uninstalled the product, reuploaded the files / images, installed the product, and finally re-added the language file) it again, but the problem persists - it doesn't seem to show. I've played around with the settings and permissions, but can't get a handle on what is causing the problem.

Raptor
03-01-2009, 05:46 AM
Paid for the unbranded version - great mod !

Although - Show online users list in a tab - doesnt work for me (they display ok when listed under the chatbox - but I see no tab when I enable this - any suggestions ?

(Using vb 3.8.1)

VBDev
03-01-2009, 08:19 AM
Is this directed towards me? If so can u be more specific..I'm not to good with this.

Thanks so much for your help

No it was directed at punk23.

The errors / warnings in FF error console are present regardless of hooks used, and aren't present when the default style is used (which should also show the chatbox), so they aren't important.

Gah, I uninstalled (deleted files and images, uninstalled the product, reuploaded the files / images, installed the product, and finally re-added the language file) it again, but the problem persists - it doesn't seem to show. I've played around with the settings and permissions, but can't get a handle on what is causing the problem.

Well I am sorry but I don't remember your problem, it's too hard to follow each person problem within one single thread :/

It's the chatbox which is not displayed at all ?

VBDev
03-01-2009, 08:20 AM
Paid for the unbranded version - great mod !

Although - Show online users list in a tab - doesnt work for me (they display ok when listed under the chatbox - but I see no tab when I enable this - any suggestions ?

(Using vb 3.8.1)

You should see a new button under the channels one at the left of the chatbox.

kronnos
03-01-2009, 08:33 AM
Hey VBDEV,

I see on the top all except one of the bugs have been fixed for the next release. Will it now be release or will you be finishing up the extra features list?

punk23
03-01-2009, 09:12 AM
Clement, your support is amazing and I thank you for that :)

So, I put this;
function open_chatbox_window()
{
window.open(bburl + "/mgc_cb_evo.php?" + SESSIONURL + "do=view_chatbox" , "view_chatbox", "toolbar=no,scrollbars=yes,resizable=yes,left=0 top=0,width=640,height=480");
return false;
}
Where? In the Forumhome template?

Thanks.

Raptor
03-01-2009, 09:16 AM
You should see a new button under the channels one at the left of the chatbox.

No its not there ?

hambil
03-01-2009, 10:52 AM
Amazing Mod. Thank you!

A few notes:

In IE (7 & 8)
Alternate colors has no effect
The Private Chat popup defaults to Cancel when enter is pressed - which is very confusing.

In all browsers
Activation of the new post warning in the chatbox causes double entries in the Notifications column. The problem didn't appear for a few hours, but now is persistent. New threads notification works fine.
The popups do not use skin colors, and on my skin (and I assume many others) they were unreadable. I discovered that changing the font color on the Page Background works, but since my page background is black is took a lot of tweaking to get a color that looked good on both black, and the white background of the popups.
The blinking or even just the changing of the icon to chatchannelname_new.gif does not work when new messages are sent to non-active channels.

Again, amazing work. Best shoutbox I've ever used.

VBDev
03-01-2009, 01:15 PM
Hey VBDEV,

I see on the top all except one of the bugs have been fixed for the next release. Will it now be release or will you be finishing up the extra features list?

Well the last remaining bug is a problem on Opera side, it's a browser bug I think, so I haven't found any way to solve that.

No I don't think I'll be adding any other of the listed features in the upcoming version. I just have to add a small tweak to enhance chatbox speed.

But you know I don't just work on the chatbox ;)

Clement, your support is amazing and I thank you for that :)

So, I put this;
function open_chatbox_window()
{
window.open(bburl + "/mgc_cb_evo.php?" + SESSIONURL + "do=view_chatbox" , "view_chatbox", "toolbar=no,scrollbars=yes,resizable=yes,left=0 top=0,width=640,height=480");
return false;
}Where? In the Forumhome template?

Thanks.

Well if your button is on forumhome yes. Don't forget to put that code between the script tags as I stated in a previous post.

No its not there ?

Oh but I am stupid the button is in the edtior line. You should see it it's a power plug.


In IE (7 & 8)
Alternate colors has no effect


Do you get any javascript error ?


The Private Chat popup defaults to Cancel when enter is pressed - which is very confusing.


Well the YUI popups are meant to work like this.

I have to work on the code to make it default enter, it's on the todo list.


In all browsers
Activation of the new post warning in the chatbox causes double entries in the Notifications column. The problem didn't appear for a few hours, but now is persistent. New threads notification works fine.


Really ? Are you sure you're using last chatbox version ?


The popups do not use skin colors, and on my skin (and I assume many others) they were unreadable. I discovered that changing the font color on the Page Background works, but since my page background is black is took a lot of tweaking to get a color that looked good on both black, and the white background of the popups.


That's normal they use YUI css, if you want to tweak them, have a look at this page : http://developer.yahoo.com/yui/examples/container/panelskin1.html.


The blinking or even just the changing of the icon to chatchannelname_new.gif does not work when new messages are sent to non-active channels.


There was such bug in a previous version but not the latest one. Again, are you sure you are using the last version ?
Or have you been doing a chatbox upgrade lately ? In that case check that you don't have any non reverted templates and refresh your browser cache.

Juiced PC Gear
03-01-2009, 02:17 PM
I'm having some issues.

My Chatbox is stuck on "Loading..." and I can't enter a chat or anything.

http://forums.juicedpc.com.au

How do I fix this?

Thanks!

VBDev
03-01-2009, 02:32 PM
Your chatbox is not accessible to anonymous, please provide a test user or show it to anonymous users.

Juiced PC Gear
03-01-2009, 02:33 PM
I have updated the chatbox permissions.
please check now.

I have made it possible for you to also post some chats. Please check now.

Thanks.

VBDev
03-01-2009, 02:53 PM
According to the error returned by firebug, the mgc_cb_evo_ajax.php file is missing in your forum root.

Juiced PC Gear
03-01-2009, 03:02 PM
Ahhh! I see what happened. When I uploaded the file it somehow corrupted and was a 0kb file!

Thanks for the support its working 100% now!

<3 Marked as installed and rated 5/5.

hambil
03-01-2009, 05:10 PM
Do you get any javascript error ?


Webpage error details

User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.04506; .NET CLR 3.5.21022)
Timestamp: Sun, 1 Mar 2009 18:17:35 UTC


Message: 'YAHOO.util.DataSourceBase.TYPE_JSON' is null or not an object
Line: 7
Char: 343
Code: 0
URI: http://www.trollkingdom.net/forum/clientscript/mgc_cb_evo/yui/autocomplete/autocomplete-min.js



Webpage error details

User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.04506; .NET CLR 3.5.21022)
Timestamp: Sun, 1 Mar 2009 18:18:58 UTC


Message: 'YAHOO.util.DataSourceBase.TYPE_JSON' is null or not an object
Line: 7
Char: 343
Code: 0
URI: http://www.trollkingdom.net/forum/clientscript/mgc_cb_evo/yui/autocomplete/autocomplete-min.js


Message: Object expected
Line: 1
Char: 1753
Code: 0
URI: http://www.trollkingdom.net/forum/clientscript/mgc_cb_evo/mgc_cb_evo_functions.js



Well the YUI popups are meant to work like this.

I have to work on the code to make it default enter, it's on the todo list.

It defaults yes on firefox and chrome - stupid YUI.


Really ? Are you sure you're using last chatbox version ?

2.2.1
I've attached a screencap.


That's normal they use YUI css, if you want to tweak them, have a look at this page : http://developer.yahoo.com/yui/examples/container/panelskin1.html.

Okay, that helped me change the colors, but manually. I will take a look at how to get them to use style colors when I have a bit of time. Thanks.


There was such bug in a previous version but not the latest one. Again, are you sure you are using the last version ?
Or have you been doing a chatbox upgrade lately ? In that case check that you don't have any non reverted templates and refresh your browser cache.
Versions is 2.2.1 and I do not edit templates directly - I only use template hooks, or the Template Modification System (https://vborg.vbsupport.ru/misc.php?do=producthelp&pid=tms).

hambil
03-01-2009, 05:27 PM
I moved up the execution order of Newpost notification handling (moderation) and it seems to work now (double notification is gone). If I have more trouble I'll hunt down exactly what other mod is conflicting. Thanks :)

OblivionMage
03-01-2009, 07:31 PM
Well I am sorry but I don't remember your problem, it's too hard to follow each person problem within one single thread :/

It's the chatbox which is not displayed at all ?

Yes, the issue is that the chatbox isn't displayed at all in any styles, despite being re-installed multiple times.

I've sorted through all of the options, and can't figure out the problem. :(

PHSChat
03-01-2009, 07:44 PM
OK - I finally figured it out.

When creating a new channel, for instance, the Advice channel, you would refer to the image thus: mgc_cb_evo_advice (where "advice" is your unique file name).

However, you need to create two different versions of your icon, one is sharp (the sel version of the image) and the other is fuzzy (the nosel version).

You will need to name the two images thus:
mgc_cb_evo_advice_sel.gif
mgc_cb_evo_advice_nosel.gif

....then upload those two images to the channels directory.


Ok so that's not for the latest version (2.1.0) ?



Hum, I add this and will look at it.



By editing the templates and using css attributes.



Well ok... Sad you gave up.



Well if you look closely it's stated that the extension, _sel and _nosel are not to be inputed !!!

The mgc_cb_evo prefix is not mandatory at all !!

You just have to put everything in the name of your image before the _sel.gif or _nosel.gif or _new.gif, that's all.

VBDev
03-01-2009, 07:55 PM
Yes, the issue is that the chatbox isn't displayed at all in any styles, despite being re-installed multiple times.

I've sorted through all of the options, and can't figure out the problem. :(

Have you tried the style issue fix ?

OblivionMage
03-02-2009, 12:29 AM
I've tried it, but to no avail.

Its not like its an issue with a specific style though, it doesn't show on any of them including the VB Default one.

Redzzand
03-02-2009, 03:27 PM
Oh ok, well what i did was decrease the auto refresh rate to about 7seconds and now the chatbox works way better. I also disabled inactive mode. I believe most of the functions are now working properly!

thanks again for this mod.

Feature Request
* Disable sound button
* Add actual Channel name next to channel icon or Channel Drop down



You mean a temporarly disable sound ? In addition to the one in the usercp ?

Channel name can be shown in the chatbox header, there is an option for that.



Is there any way to put a disable sound button next to the refresh button so that users dont have to go to control panel to disable sound. some users never go to control panel because there are so many options, that they get lost.

ispots
03-02-2009, 05:11 PM
Hey vbDev.....the error when copying threads and moving posts still exists even after 2.2.1 upgrade.

Here is the error:
Database error in vBulletin 3.8.1:

Invalid SQL:

INSERT INTO mgc_cb_evo_chat
(dateline,fromuid,ctext,sticky,chanid,coidentifier ,iswarning,warningtype,tpforumid)
VALUES
(1236020929,,'614,Spring Break Details: Who wants \'em? TEST COPY',0,0,0,1,'thread',2);

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''614,Spring Break Details: Who wants \'em? TEST COPY',0,0,0,1,'thread',2)' at line 4
Error Number : 1064
Request Date : Monday, March 2nd 2009 @ 12:08:49 PM
Error Date : Monday, March 2nd 2009 @ 12:08:49 PM
Script : http://www.s2kcincinnati.com/forum/postings.php?do=domovethread&t=598
Referrer : http://www.s2kcincinnati.com/forum/postings.php?t=598&pollid=
IP Address : ,edited out>
Username : ,edited out>
Classname : vb_database
MySQL Version : 5.0.67-log

LakeAnna
03-03-2009, 12:01 AM
I have token issues and this is the first chat box I have ever tried to install - any help would be greatly appreciated.

Version 3.7.4
Your submission could not be processed because a security token was missing.

If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.

LakeAnna
03-03-2009, 12:31 AM
I have token issues and this is the first chat box I have ever tried to install - any help would be greatly appreciated.

Version 3.7.4

Ooops found my problem

Elric
03-03-2009, 11:47 AM
Hey,

I have installed this chatbox and now the Box ist loading and loading and loading, when i will shout comes this

Ihr Seitenaufruf konnte auf Grund eines fehlenden Securitytokens nicht verarbeitet werden.

what is the prob with the securitytoken..

Sugoi na
03-03-2009, 12:16 PM
My issue seems to be similar to many others. The odd part is, the LAST version I used worked perfectly. When upgrading to the latest version, many different issues occure such as slow/no loading & many members are complaining of lag issues.

Any major code changes in the latest version that may cause this?

bosal
03-03-2009, 06:32 PM
Is there a possibility to have a option to some usergroup have diffrent font color ?

Sugoi na
03-03-2009, 06:48 PM
Is there a possibility to have a option to some usergroup have diffrent font color ?

The module is set for everyone or no one to be able to change their color via the user CP. Although I think this option would be nice.

bosal
03-03-2009, 07:31 PM
It would be very nice :)

exyuteam
03-03-2009, 07:36 PM
Function Display the chats time not working..... !

Let you choose to display or not the time column in the chatbox (it will still be displayed in the archives even if this option is set to NO)

I set this option to YES! Here is a Print Screen of problem - TIME not show in ARCHIVE page, and it's displayed in chat box! I use VB 3.8.1 and Chatbox 2.2.1.

https://vborg.vbsupport.ru/external/2009/03/123.jpg

Thanks for great hack....

chooky
03-04-2009, 01:01 AM
I have the same issue with "security token was missing"

fukdawrld
03-04-2009, 02:12 AM
Yes It is a replacement variable {IF} = voodoo/images

When I erase it it removes many other images from my site. Is there away around this?

No one can help with this issue? Is there something I can change in the xml to just set the image path?

Also I stated before that registered users seen the chatbox opposite of the settings..This is false. Safari users see the chabox opposite.

VBDev
03-04-2009, 03:52 AM
I've tried it, but to no avail.

Its not like its an issue with a specific style though, it doesn't show on any of them including the VB Default one.

Hum very very strange. Can you please send me by pm an access to your forum ? (admin access if possible)

Is there any way to put a disable sound button next to the refresh button so that users dont have to go to control panel to disable sound. some users never go to control panel because there are so many options, that they get lost.

Well that could be added yes, would you like a temporarly sound disabling or like if it was the option in the usercp ?

VBDev
03-04-2009, 03:57 AM
Hey vbDev.....the error when copying threads and moving posts still exists even after 2.2.1 upgrade.

Here is the error:

This is honestly very very strange :( I am not able to reproduce that at all.

You experience it for every thread you try to move with inlinemod ?

Hey,

I have installed this chatbox and now the Box ist loading and loading and loading, when i will shout comes this

what is the prob with the securitytoken..

Ooops found my problem

I think Elric might be experiencing the same problem. Can you tell us what was the mistake ?

My issue seems to be similar to many others. The odd part is, the LAST version I used worked perfectly. When upgrading to the latest version, many different issues occure such as slow/no loading & many members are complaining of lag issues.

Any major code changes in the latest version that may cause this?

Well I found out the problem that causes that lag issues. This will be corrected in the next release.

Is there a possibility to have a option to some usergroup have diffrent font color ?

Well you can select the default color for each usergroups chat in the usergroup permissions yes.

VBDev
03-04-2009, 04:00 AM
Function Display the chats time not working..... !

Let you choose to display or not the time column in the chatbox (it will still be displayed in the archives even if this option is set to NO)

I set this option to YES! Here is a Print Screen of problem - TIME not show in ARCHIVE page, and it's displayed in chat box! I use VB 3.8.1 and Chatbox 2.2.1.

https://vborg.vbsupport.ru/external/2009/03/123.jpg

Thanks for great hack....

It is meant to do so. I think it's stated in the options, archives are not affected by this option which seems logical as archives keep chats from long ago.

No one can help with this issue? Is there something I can change in the xml to just set the image path?

Also I stated before that registered users seen the chatbox opposite of the settings..This is false. Safari users see the chabox opposite.

Well you can edit the templates if you want but that's not very efficient.

I asked you if that IF thing was default vBulletin working or if you add extra plugins for that ?

About Safari issue, I have it (am on a Mac) and I really don't have that issue.
Perhaps it's because I am running the next release and I corrected many things.

Sugoi na
03-04-2009, 10:12 AM
Well I found out the problem that causes that lag issues. This will be corrected in the next release.

Wonderful! I appreciate your time & efforts & look forward to your latest release!

keep up the good work.

exyuteam
03-04-2009, 11:15 AM
Function Display the chats time not working..... !

Let you choose to display or not the time column in the chatbox (it will still be displayed in the archives even if this option is set to NO)

I set this option to YES! Here is a Print Screen of problem - TIME not show in ARCHIVE page, and it's displayed in chat box! I use VB 3.8.1 and Chatbox 2.2.1.

https://vborg.vbsupport.ru/external/2009/03/123.jpg

Thanks for great hack....

It is meant to do so. I think it's stated in the options, archives are not affected by this option which seems logical as archives keep chats from long ago.



I agree, and I think we not understand (read carefuly my message - maybee my english is not good.... :o). In archive page, TIME IS NOT SHOWING! That's the problem :) I also think that time should display always. Screenshot is from Archive page!

Thanks m8

ispots
03-04-2009, 11:21 AM
This is honestly very very strange :( I am not able to reproduce that at all.

You experience it for every thread you try to move with inlinemod ?
Yep, every time.

SnapOff Racing
03-04-2009, 03:22 PM
VBDev, just curious about the ETA on the next ver... Thanks!

LakeAnna
03-04-2009, 04:28 PM
I think Elric might be experiencing the same problem. Can you tell us what was the mistake ?


Yeah I didnt have all the files uploaded - I went through file by file and made sure each was in the appropriate folder - I was missing 2.

fukdawrld
03-05-2009, 02:13 AM
It is meant to do so. I think it's stated in the options, archives are not affected by this option which seems logical as archives keep chats from long ago.



Well you can edit the templates if you want but that's not very efficient.

I asked you if that IF thing was default vBulletin working or if you add extra plugins for that ?

About Safari issue, I have it (am on a Mac) and I really don't have that issue.
Perhaps it's because I am running the next release and I corrected many things.

Yes I do have that {if} thing. Is there a way around this?

VBDev
03-05-2009, 05:19 AM
I agree, and I think we not understand (read carefuly my message - maybee my english is not good.... :o). In archive page, TIME IS NOT SHOWING! That's the problem :) I also think that time should display always. Screenshot is from Archive page!

Thanks m8

Well as I have added lots of options I don't remember everything.

But I think there is a separate option for archives time.

Yep, every time.

Well very odd cuz I don't experience that personnaly when using inline mod. What is your vB version ?

VBDev, just curious about the ETA on the next ver... Thanks!

Yesterday evening I added one of the feature I wanted to add since a long time (wysiwyg text input ;)), so basically the release is ready.

I will have to translate the few new sentences and I have launched a thread on forumcoding asking for BF version users for beta test :)

Yes I do have that {if} thing. Is there a way around this?

Well what's that IF linking to ? You could replace the IF in your style by the real path to the images no ?

exyuteam
03-05-2009, 08:28 AM
Well as I have added lots of options I don't remember everything.

But I think there is a separate option for archives time.



I just pass thrue all of your options and I find all option for archives time on Chats display page. My date/time displaying settings are:

Display the chats date - YES
Chatbox dates format - d-m-Y
Activate the display of Today/Yesterday in the date for the chatbox - YES
Display the chats time - YES
Chatbox times format - H:i

Number of chats per archives page - 50
Display order of chats in each archives page - Newest messages on top
Archive's date display format - d-m-Y, H:i

Maybee some combination of functions give this problem :) I just see that in archive page I just see TODAY and YESTERDAY messages!? In I turn OFF Activate the display of Today/Yesterday in the date for the chatbox date and time was shown correctly (05-03-2009, 10:54). BUT I notice that here I have one more problem - I see only today and yesterday messages (!?!?) even if I set "Number of days before automatic chats removal - 15"!!! For this options you wrote:

"WARNING : by activating this option, the date and hours format set for the chatbox will be replaced by the forum's default one"

Maybee problem is here? It just need to display Today, H:i (or Yesterday, H:i or for older chats full date/time 03-03-2009, 12:54). I think that this is working with older version(s).....

Please check.....


Thanks in advance m8!

P.S. I hope so that my bad english is not too bad :) and that you can understand what I try to explain....

ispots
03-05-2009, 01:40 PM
Well very odd cuz I don't experience that personnaly when using inline mod. What is your vB version ?

3.8.1

The problem happens for me when you try to "Copy Thread" under the "Thread Tools" menu...and it happens every time on every thread.

Deyth
03-05-2009, 11:20 PM
I installed this to mess around. I liked a lot of features but won't switch from Inferno's product just yet. Some thoughts:

Clicking a user's name should open a pm.
Everytime the chat refreshed the input field lost focus.
Take a look at Inferno's constant ajax reloading. It's awesome and has a very IRC-feel.
Why is a channel image required? I'd prefer text.
The option to expand the input field to 100% of available space would be nice.

VBDev
03-06-2009, 06:34 AM
I just pass thrue all of your options and I find all option for archives time on Chats display page. My date/time displaying settings are:

Display the chats date - YES
Chatbox dates format - d-m-Y
Activate the display of Today/Yesterday in the date for the chatbox - YES
Display the chats time - YES
Chatbox times format - H:i

Number of chats per archives page - 50
Display order of chats in each archives page - Newest messages on top
Archive's date display format - d-m-Y, H:i

Maybee some combination of functions give this problem :) I just see that in archive page I just see TODAY and YESTERDAY messages!? In I turn OFF Activate the display of Today/Yesterday in the date for the chatbox date and time was shown correctly (05-03-2009, 10:54). BUT I notice that here I have one more problem - I see only today and yesterday messages (!?!?) even if I set "Number of days before automatic chats removal - 15"!!! For this options you wrote:

"WARNING : by activating this option, the date and hours format set for the chatbox will be replaced by the forum's default one"

Maybee problem is here? It just need to display Today, H:i (or Yesterday, H:i or for older chats full date/time 03-03-2009, 12:54). I think that this is working with older version(s).....

Please check.....


Thanks in advance m8!

P.S. I hope so that my bad english is not too bad :) and that you can understand what I try to explain....

Hum nope you lost me :/

3.8.1

The problem happens for me when you try to "Copy Thread" under the "Thread Tools" menu...and it happens every time on every thread.

Oh so it's while trying to copy a thread, not just moving it ?


Clicking a user's name should open a pm.


Well I do not agree with you, in all vB pages, clicking a username would let you go the user member page, this is why I did it for the chatbox.
Clickin the menu and then Send PM is not a huge thing IMO ;)


Everytime the chat refreshed the input field lost focus.


Well yes I know I have to do something about that.


Take a look at Inferno's constant ajax reloading. It's awesome and has a very IRC-feel.


It's up to you to make it "constant" just a question of refresh time !


Why is a channel image required? I'd prefer text.


If you don't put an image name, the channel title is shown.


The option to expand the input field to 100% of available space would be nice.

Input field size is an option.

exyuteam
03-06-2009, 10:27 AM
Hum nope you lost me :/


:) OK. Let's try this way (if you need look my earlier post):

1. In archive page I have messages only from today and yesterday (I set in options auto delete for 15 days!!!).... :eek:
2. When is turn ON Activate the display of Today/Yesterday in the date for the chatbox in archive page I not see time! Just Today or Yesterday without any time!
3. If Activate the display of Today/Yesterday in the date for the chatbox is set to NO, then in archive page I CAN SEE date + time correctly!

I hope now you understand me :D

Cheers!!!

Deyth
03-06-2009, 10:47 AM
It's up to you to make it "constant" just a question of refresh time !
The difference being if I do that it will refresh whether there is data or not whereas Inferno vbShout will only refresh when there's new data to show.
If you don't put an image name, the channel title is shown.
I tried that but it's not consistent across browsers.
Input field size is an option
Fixed field size is an option. What I'm talking about is having the field take up all available space as a default no matter your resolution. Take a look. (http://www.the-combine.net/vbulletin/index.php)

ispots
03-06-2009, 12:37 PM
Oh so it's while trying to copy a thread, not just moving it
Every time.....can you replicate it?

kimmer
03-06-2009, 01:46 PM
Installed everything in the download zip, but nothing shows up on the site. I tried to install the 1.0 because I want to upgrade to vbadvanced and that module for chatbox. So neither show up on either versions of my forum. I've checked everything a few times, but I still get nothing.

maidos
03-06-2009, 01:47 PM
was wondering will u include a feature to disable yui?

ispots
03-06-2009, 02:05 PM
Installed everything in the download zip, but nothing shows up on the site. I tried to install the 1.0 because I want to upgrade to vbadvanced and that module for chatbox. So neither show up on either versions of my forum. I've checked everything a few times, but I still get nothing.
Did you go into the group permissions and give access to the chatbox to the appropriate groups?

They are turned OFF by default, so no one (not even you) will see them until you turn it on.

You also have to actually install the product and the language...if you didn't do that, it's in the readme.

kimmer
03-06-2009, 02:36 PM
Did you go into the group permissions and give access to the chatbox to the appropriate groups?

They are turned OFF by default, so no one (not even you) will see them until you turn it on.

You also have to actually install the product and the language...if you didn't do that, it's in the readme.

I uploaded the product and installed the language. Where do I do the group permissions at? When I look at the permissions in the cmps, is shows them as being on, but that's for the vbadvanced and it still doesn't show there. Is there another spot for permissions for my standard vbulletin board?

ispots
03-06-2009, 03:04 PM
I uploaded the product and installed the language. Where do I do the group permissions at? When I look at the permissions in the cmps, is shows them as being on, but that's for the vbadvanced and it still doesn't show there. Is there another spot for permissions for my standard vbulletin board?

-Log into Admin
-Select Usergroups
-Select Usergroup Manager
-Select a group (start with yourself, Admin)
-Scroll all the way to the bottom and you will see this section "MGC Chatbox Evo : Custom permissions "
-The first option is "Can view the chatbox"

I'm gonna bet that option says "no" for you. :D

kimmer
03-06-2009, 03:11 PM
-Log into Admin
-Select Usergroups
-Select Usergroup Manager
-Select a group (start with yourself, Admin)
-Scroll all the way to the bottom and you will see this section "MGC Chatbox Evo : Custom permissions "
-The first option is "Can view the chatbox"

I'm gonna bet that option says "no" for you. :D

AWW yeah! One last question...how do I shrink it to fit better? I see the option for height, but what about width?

VBDev
03-06-2009, 03:19 PM
was wondering will u include a feature to disable yui?

Disable yui ??? lol

Yes I will disable YUI so that no Ajax request is performed ... vBulletin ajax is based on yui so answer is NO.

kimmer
03-06-2009, 03:26 PM
Nevermind, got it working. Thanks again ispots!!

entertain
03-06-2009, 03:26 PM
no ajax requests? Oh yeah this would be very nice :D :)

maidos
03-06-2009, 03:33 PM
maybe i wasnt direct enough well was wondering if ur sb will include option to work without using yui

kimmer
03-06-2009, 04:37 PM
Everything is working good! Thanks!

john4life12
03-06-2009, 06:31 PM
I'm getting an error.

Warning: require_once([path]/includes/functions_mgc_cb_evo.php) [function.require-once]: failed to open stream: No such file or directory in [path]/global.php(400) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home/shinobi2/public_html/forums/includes/functions_mgc_cb_evo.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/shinobi2/public_html/forums/global.php(400) : eval()'d code on line 1

Skyrider
03-06-2009, 06:44 PM
Just want to let you know that this chat box doesn't work in Google Chrome. Not sure if this was known, just letting you know. Keeps saying "Loading ..."

Sugoi na
03-06-2009, 06:52 PM
Just want to let you know that this chat box doesn't work in Google Chrome. Not sure if this was known, just letting you know. Keeps saying "Loading ..."

I think it was only made for GOOD browsers =P

On a serious note:

Any specific ETA for the next release? I am on my last nerve with the load issues & am thinking if I should revert to inferno shout again....

topianno
03-07-2009, 01:00 AM
Hello,
When I try and install the software it crashes vBulletin with the following message:

Warning: require_once([path]/includes/functions_mgc_cb_evo.php) [function.require-once]: failed to open stream: No such file or directory in [path]/global.php(400) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home2/kuriban/public_html/forum/includes/functions_mgc_cb_evo.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/public_html/forum/global.php(400) : eval()'d code on line 1

entertain
03-07-2009, 04:05 AM
I'm getting an error.

Warning: require_once([path]/includes/functions_mgc_cb_evo.php) [function.require-once]: failed to open stream: No such file or directory in [path]/global.php(400) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home/shinobi2/public_html/forums/includes/functions_mgc_cb_evo.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/shinobi2/public_html/forums/global.php(400) : eval()'d code on line 1

Hello,
When I try and install the software it crashes vBulletin with the following message:
I'm sure that you haven't uploaded the files correctly.

Please take a look at includes/functions_mgc_cb_evo.php if this file exists.

sinomama
03-07-2009, 08:39 AM
HELP,Au secour!

I have installed the chatbox, all works well, but It cannot show the chinese. What a pity to remove the program!!!

Could you help me, is it possible to result it, plz?

Merci!

VBDev
03-07-2009, 11:00 AM
maybe i wasnt direct enough well was wondering if ur sb will include option to work without using yui

It was direct and my answer was too bud.

Do you ask vB if they are going to work without yui : answer is No.

What the point of removing YUI for you ?

In the next version I have included a feature which ensures that all javascript files are loaded before starting the chatbox so no more issues ;)

HELP,Au secour!

I have installed the chatbox, all works well, but It cannot show the chinese. What a pity to remove the program!!!

Could you help me, is it possible to result it, plz?

Merci!

If you have uploaded the english language file on your forum chinese language file it's normal.

it's a question of character encoding, try editing the lang file of the chatbox and put the character encoding that corresponds to chinese.

Then import it again.

VBDev
03-07-2009, 11:02 AM
Just want to let you know that this chat box doesn't work in Google Chrome. Not sure if this was known, just letting you know. Keeps saying "Loading ..."

It might be due to the javascript not being loaded while DOM's ready.

I have included a feature in the upcoming version (which should be released tomorrow) that ensure all javascripts files are loaded before starting the chatbox.

It might bring a higher loading time for the chatbox but avoid any further issues :)

sinomama
03-07-2009, 11:22 AM
If you have uploaded the english language file on your forum chinese language file it's normal.

it's a question of character encoding, try editing the lang file of the chatbox and put the character encoding that corresponds to chinese.

Then import it again.
Thanks for the quick reply.

I have the chatbox in french, I haven't yet put the English version , but no problem for the french for the moment.

Where is the lang file of the chatbox, please? I am afraid to put the encoding UTF-8 in a wrong place.

sinomama
03-07-2009, 11:45 AM
I have change the first ligne of product-mgc_cb_evo.xml to <?xml version="1.0" encoding="UTF-8"?>

But the chatbox can not still show chinese.

exyuteam
03-07-2009, 12:36 PM
:) OK. Let's try this way (if you need look my earlier post):

1. In archive page I have messages only from today and yesterday (I set in options auto delete for 15 days!!!).... :eek:
2. When is turn ON Activate the display of Today/Yesterday in the date for the chatbox in archive page I not see time! Just Today or Yesterday without any time!
3. If Activate the display of Today/Yesterday in the date for the chatbox is set to NO, then in archive page I CAN SEE date + time correctly!

I hope now you understand me :D

Cheers!!!

.... in the upcoming version (which should be released tomorrow) .....


I hope so that you'll fix this minor problems in Archive page.......

Cheers!

VBDev
03-07-2009, 12:50 PM
Thanks for the quick reply.

I have the chatbox in french, I haven't yet put the English version , but no problem for the french for the moment.

Where is the lang file of the chatbox, please? I am afraid to put the encoding UTF-8 in a wrong place.

You are having that problem with no lang imported ?

Do you have such problems on ajax functionnalities like quick reply (ajax based with no page refresh) ?

VBDev
03-07-2009, 12:55 PM
I hope so that you'll fix this minor problems in Archive page.......

Cheers!

Yes, I have removed today/yesterday from archives as the archives date as its own option for format.

sinomama
03-07-2009, 01:46 PM
You are having that problem with no lang imported ?

Do you have such problems on ajax functionnalities like quick reply (ajax based with no page refresh) ?
I don't understand............I have upload as in readme:"Upload the content of the Files folder in your forum root.
Upload the content of the Images in each of your forum styles directories. " And I import just the product-mgc_cb_evo.xml.

Do I have to upload ou import aloso English.xml ? to where exactly, like product-mgc_cb_evo.xml?

I have never a problem of ajax for the moment. Quick reply works well.

Thanks!

VBDev
03-07-2009, 02:29 PM
When you type characters in the quick reply box (in chinese) then the posts is posted and retrieved through ajax without page reload at all ?

sinomama
03-07-2009, 02:49 PM
When you type characters in the quick reply box (in chinese) then the posts is posted and retrieved through ajax without page reload at all ?
No, the message is posted directly without relaoding the page at all.

DeanoUK
03-07-2009, 03:51 PM
How'd u get the $mgc_cb_evo_postbit to work? I added it to the postbit template, but nothing appears?

voter
03-07-2009, 06:19 PM
I used to use the vBShout v2.0 ChatBox (https://vborg.vbsupport.ru/showthread.php?t=93097) that was originally created by ZeroTolerance, which I believe now has been renamed into Inferno vBShout Lite. In any case while these two mods are basically the same, unfortunately there are some differences in the table names thus making it not possible to use the Inferno Import Script to import chats from vBShout inot MGC EVO.

So I reworked the import script a little to allow the importing of vBShout Chats into MGC EVO. Just posting this up for VBDev if you would like to implement this into your next version, or if anyone knows what they are doing they could use this to import also. Just replace the mgc_cb_evo.php file from your admincp folder with the one that I have attached. Then your "Import Scripts" page will show up like this.

http://i178.photobucket.com/albums/w261/DSMKilla1/mgc_evo_import.jpg

Also this mgc_cb_evo.php file is from the current 2.1.0 version.
Both the original, as well your new version is not able to import vbSout.

To make it possible just one correction is needed . TABLE_PREFIX . in line 672

Change in the line 672
$check_vbshout = $vbulletin->db->query_read("SHOW TABLES LIKE 'shout'");

to

$check_vbshout = $vbulletin->db->query_read("SHOW TABLES LIKE '" . TABLE_PREFIX . "shout'");

voter
03-07-2009, 06:54 PM
Why I can't count chat numbers?
Database error in vBulletin 3.7.1:

Invalid SQL:
SELECT MIN(dateline) AS start FROM vbmgc_cb_evo_chat WHERE isthreadwarning='0' AND ispostwarning='0';

MySQL Error : Unknown column 'isthreadwarning' in 'where clause'
Error Number : 1054
Request Date : Saturday, March 7th 2009 @ 01:52:34 PM
Error Date : Saturday, March 7th 2009 @ 01:52:35 PM
Script : ...admin/mgc_cb_evo.php?do=updatecounters
Referrer : ...admin/mgc_cb_evo.php?do=counters

By the way $mgc_cb_evo_stats also not working nowhere in ForumHome?

entertain
03-07-2009, 08:39 PM
@voter:

Take a look into the bug list ;)
SQL error when trying to update counters in the admincp of the chatbox [See here for a fix]

davew
03-08-2009, 12:42 PM
I just had to disable MGC :(

I was getting the "Loading" message, and nothing else..

Have installed something else temporarily, hopefully the new version will fix this issue, and this is without doubt the best featured chatbox around..

Cheers,
Dave