[AJAX] Post Thank You Hack

[Yorixz]

It says "AFTER place this:", so you should place it after what you searched for.

[BANDiT600]

Look at the screenshot, what can be wrong??? BTW, using your hack from the beginning...;)

[Abe1]

Look at the screenshot, what can be wrong??? BTW, using your hack from the beginning...;)
I'm not sure why you are getting that. I remmber getting that myself by I forgot what I did then.

[bashy]

Perhaps its something as simple as a _ after the button code in the postbit?

Look at the screenshot, what can be wrong??? BTW, using your hack from the beginning...;)

[BANDiT600]

No, I don't think so, it happens after uploading an xml file.

[BANDiT600]

I always doing carefuly upgrade, here it's something wrong in code, I don't know where because I'm not PHP writer.

[Tulsa]

Bashy you could also move the thanks and groans amounts into the sig file section of the postbit or legacy, whichever you use. It would put them just under the users sig file. If they don't have a sig though, it won't show.

[bashy]

Cheers for the heads up Tulsa,
I have a few that dont have a sig so this wouldnt be much cop..

What i have done for noww to make it a little smaller is removed the
$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]
and i have done the same for the groan hack as well...its only removed to lines from the postbit but its a start, i am a little reluctant to doing the other hack atm that the other member posted although i would like it, but i aint too confident in the instructions and i may mess it up

[BANDiT600]

I'm not sure why you are getting that. I remmber getting that myself by I forgot what I did then.
Please, remember what you did... :hurt:

[mitachi]

thanks a lot

[kommuni]

Hi,

thanks for the great hack. I used V3.4 for a few weeks and now upgraded to 4.4 - everything still works but it's not using AJAX as far as i can see. I did no template changes to any of the plugin templates and already cleaned my browser cache - any idea?

[Abe1]

Hi,

thanks for the great hack. I used V3.4 for a few weeks and now upgraded to 4.4 - everything still works but it's not using AJAX as far as i can see. I did no template changes to any of the plugin templates and already cleaned my browser cache - any idea?
The only think I can think of is that you dont allow your browser to use scripting. Try another browser.

[kommuni]

every other AJAX-Function works well in the Forums so can't be this i think.

[RFViet]

I want the post will be pushed up when members press Thanks button . How to do that ???

[kommuni]

@Abe1: Strange things happen after installing 4.4 - after a while nothing did work (no new thanks were recorded) after serveral tries i deinstalled, restored a backup and reinstalled 3.4 again - works fine. Seems like there's something wrong with 4.4

[Abe1]

@Abe1: Strange things happen after installing 4.4 - after a while nothing did work (no new thanks were recorded) after serveral tries i deinstalled, restored a backup and reinstalled 3.4 again - works fine. Seems like there's something wrong with 4.4
Did you edit any of the templates?

[kommuni]

as i already said: no :)

[Abe1]

as i already said: no :)
I'd have to look at your ACP to figger out the problem.

[RFViet]

I want the post will be pushed up when members press Thanks button . How to do that ???

any idea ???

[Smiry Kin's]

when i click "Thank You" it doesnt seem to work :(

[dinodonk]

i do not want a postbit added when someone thanked... so i change thankspostbit to :

<fieldset class="fieldset">
<legend>The Following User(s) Says Thank You For This Useful Post:<if condition="$bbuserinfo[usergroupid] == 6">&nbsp|&nbsp<a href="showthread.php?do=post_thanks_remove_all&amp;p=$post[postid]" onclick="post_thanks_remove_all_$post[postid](); return false;">$vbphrase[post_thanks_remove]</a>
</if>&nbsp;|&nbsp;<if condition="$post_thanks_user > 0 && $vboptions[post_thanks_delete_own] == 1">&nbsp<a href="showthread.php?do=post_thanks_remove_user&amp;p=$post[postid]" onclick="post_thanks_remove_user_$post[postid](); return false;">$vbphrase[post_thanks_remove_user]</a></if></legend>


<table cellpadding="0" cellspacing="3" border="0">

<tr>

<td>$liste_user</td>
</tr>

</table>
</fieldset>


and move <!-- Start Post Thank You Hack -->
$post_thanks
<!-- End Post Thank You Hack --> to above signature in postbit.

will that changes make any error to your hack??

Thanks!

[dinodonk]

Wonderful hack, really something I've been looking for.

I've got a few small problems though, because I'm trying to keep my forum a bit minimalistic (my taste ;)) I've been trying to put the list of users who thanked into a popup menu, similiar to the one you get if you click on a username.

To do this I've added a new button besides the "Reputation" one which needs to be clicked to see this menu.

The code I've used for this:
After "$post[iplogged]"<!-- Start Modified Post Thank You Hack -->
$post_thanks
<!-- End Modified Post Thank You Hack -->

And in the template post_thanks_box I replaced the non-<script> content with
<!-- Start Modified Post Thank You Hack -->
<!-- post $post[postid] info menu -->

<div class="vbmenu_popup" id="infomenu_$post[postid]_menu" style="display:none">
<table cellpadding="4" cellspacing="1" border="0">
<tr>
<td class="userinfo" id="post_thanks_box_$post[postid]">
$post_thanks_box
</td>
</tr>
</table>
</div>

<span id="infomenu_$post[postid]"><a href=""><img class="inlineimg" src="$stylevar[imgdir_button]/info.gif" alt="Post Info" border="0" /><script type="text/javascript"> vbmenu_register("infomenu_$post[postid]", true); </script></span>
<!-- End Modified Post Thank You Hack -->In addition I've also removed the $spacer's out of the 'post_thanks_postbit_legacy' template.

It's working fairly well, I've got a few problems that I couldn't find a solution for though:
How can I 'extend' the hack some so I'll able to hide the info.gif image if there are no users who thanked for a post.
And how can I make sure the list will be updated when a user clicks the "Thanks" button? I'm afraid I destroyed the AJAX somewhere but can't figure out where it was.

Thanks a lot for your help, hopefully there are also other users interested in this.

Edit; reduced the template edits by one, still hoping for someone to help me fixing the bugs!
maybe you can use if with $postthanks

[Abe1]

i do not want a postbit added when someone thanked... so i change thankspostbit to :

<fieldset class="fieldset">
<legend>The Following User(s) Says Thank You For This Useful Post:<if condition="$bbuserinfo[usergroupid] == 6">&nbsp|&nbsp<a href="showthread.php?do=post_thanks_remove_all&amp;p=$post[postid]" onclick="post_thanks_remove_all_$post[postid](); return false;">$vbphrase[post_thanks_remove]</a>
</if>&nbsp;|&nbsp;<if condition="$post_thanks_user > 0 && $vboptions[post_thanks_delete_own] == 1">&nbsp<a href="showthread.php?do=post_thanks_remove_user&amp;p=$post[postid]" onclick="post_thanks_remove_user_$post[postid](); return false;">$vbphrase[post_thanks_remove_user]</a></if></legend>


<table cellpadding="0" cellspacing="3" border="0">

<tr>

<td>$liste_user</td>
</tr>

</table>
</fieldset>


and move <!-- Start Post Thank You Hack -->
$post_thanks
<!-- End Post Thank You Hack --> to above signature in postbit.

will that changes make any error to your hack??

Thanks!
Try it.

[dinodonk]

Try it.
tried.. nothing wrong, the ajax also works. Yorixz's idea is also great too but do not know if ajax is working..

[b65ran]

when i click "Thank You" it doesnt seem to work :(

I have the same problem. After i installed vbrewrite (https://vborg.vbsupport.ru/showthread.php?t=104484)
hack it doesn't work. Anybody please help me with it.

thanks in advanced.

[Bubble #5]

Hi Abe :) What code do we need to change to get the "The Following User Says Thank You..." message to appear on top of the 'Thank You table instead of on the side?

[HuangA]

Suggestion:
Can you please make the AJAX functions into a .js file; make the AJAX functions take postid as parameter; and pass parameter from the links instead of making copies of the function for each of the post on screen? This will DRASTICALLY reduce the bandwidth consumption by this hack as they do not require to be duplicated each time a post is displayed on the page.

[kafi]

Feature Request:

would be nice to have also reputation working only for desired forums (the same option as "Individual Forums to Have for Only First Post".

Thank you .-)

[Abe1]

Hi Abe :) What code do we need to change to get the "The Following User Says Thank You..." message to appear on top of the 'Thank You table instead of on the side?
Copy the post_thanks_postbit_legacy templatge and use it to replace the whole post_thanks_postbit template.

[Abe1]

Suggestion:
Can you please make the AJAX functions into a .js file; make the AJAX functions take postid as parameter; and pass parameter from the links instead of making copies of the function for each of the post on screen? This will DRASTICALLY reduce the bandwidth consumption by this hack as they do not require to be duplicated each time a post is displayed on the page.
I just started working with javascript and don't know how to use about 99.9% of it. I will try to make the javascript code come up only once. I can still leave it in a template but that only shows the tamplate once.

[Abe1]

Feature Request:

would be nice to have also reputation working only for desired forums (the same option as "Individual Forums to Have for Only First Post".

Thank you .-)
I'll add this to the 'list'.

[Hornstar]

I had 4.2 do i need to do any template changes if i install 4.4 and which ones?

Or do i need to do the lot again?

[Abe1]

I had 4.2 do i need to do any template changes if i install 4.4 and which ones?

Or do i need to do the lot again?
Just re-upload the xml file.

[rmxs]

hello i install it before some weeks nice hack byt can someone tell me how to remove from every post at the bottom the Who Said Thanks:

I get this in every post..
I have select to thanks only in first post byt i get the Who Said Thanks:in all posts

[HuangA]

Abe1:
Thanks for following up the request :) here's a little starter on how to make it so that you only really need it once. I've edited the postbit_button template to the following (it still comes up multiple times, but it only really need to be created 'once' at the top because its a function with parameters). It doesn't work yet because I am not familiar with call back functions, and I can't figure out how to pass the pid variable to the call back functions. If there's any AJAX guru or javascript expert who can help fix the rest, we can safely move the majority of the code to a separate .js file which can be cached by user browser and we can reduce the bandwidth usage by a lot (imagein the segment of code appear only once in a cached js VS appearing in html for each post appearing on page).

<script type="text/javascript">
<!--
function post_thanks_give( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
alert('state ready pid: ' + pid);
alert('state: ' + do_thanks_button.handler.readyState);
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_' + pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_ajax&p='+pid)

do_thanks_add = new vB_AJAX_Handler(true)
do_thanks_add.onreadystatechange = function () {
if (do_thanks_add.handler.readyState == 4 && do_thanks_add.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_add.handler.responseText
}
}
do_thanks_add.send('showthread.php?do=post_thanks_ add_ajax&p='+pid)
}

function post_thanks_remove_all( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_'+pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_add_ajax&p='+pid)

do_thanks_remove_all = new vB_AJAX_Handler(true)
do_thanks_remove_all.onreadystatechange = function () {
if (do_thanks_remove_all.handler.readyState == 4 && do_thanks_remove_all.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_remove_all.handler.responseText
}
}
do_thanks_remove_all.send('showthread.php?do=post_ thanks_remove_all_ajax&p='+pid)
}

function post_thanks_remove_user( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_'+pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_add_ajax&p='+pid)

do_thanks_remove_user = new vB_AJAX_Handler(true)
do_thanks_remove_user.onreadystatechange = function () {
if (do_thanks_remove_user.handler.readyState == 4 && do_thanks_remove_user.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_remove_user.handler.responseText
}
}
do_thanks_remove_user.send('showthread.php?do=post _thanks_remove_user_ajax&p='+pid)
}

document.write('<a href="#" id="post_thanks_button_$post[postid]" onclick="post_thanks_give( $post[postid] ); return false;"> <img src="images/buttons/post_thanks.gif" alt="Thanks" border="0" /></a>');
//-->
</script>
<noscript>
<a href="showthread.php?do=post_thanks_add&amp;p=$post[postid]"> <img src="images/buttons/post_thanks.gif" alt="Thanks" border="0" /></a>
</noscript>

Problems with the above so far: the call back doesn't work, so it doesn't properly achieve the ajax effect, and the remove functions doesn't work for whatever reason... do NOT, I repeat do NOT deploy / test the above on your production board. Hopefully someone can fine tune it to work and this hack would be perfect ;)

[Abe1]

hello i install it before some weeks nice hack byt can someone tell me how to remove from every post at the bottom the Who Said Thanks:

I get this in every post..
I have select to thanks only in first post byt i get the Who Said Thanks:in all posts
That is very interesting. Try running all the re-counters for this hack. You can find them in the ACP under maintenance.

[Abe1]

Abe1:
Thanks for following up the request :) here's a little starter on how to make it so that you only really need it once. I've edited the postbit_button template to the following (it still comes up multiple times, but it only really need to be created 'once' at the top because its a function with parameters). It doesn't work yet because I am not familiar with call back functions, and I can't figure out how to pass the pid variable to the call back functions. If there's any AJAX guru or javascript expert who can help fix the rest, we can safely move the majority of the code to a separate .js file which can be cached by user browser and we can reduce the bandwidth usage by a lot (imagein the segment of code appear only once in a cached js VS appearing in html for each post appearing on page).

<script type="text/javascript">
<!--
function post_thanks_give( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
alert('state ready pid: ' + pid);
alert('state: ' + do_thanks_button.handler.readyState);
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_' + pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_ajax&p='+pid)

do_thanks_add = new vB_AJAX_Handler(true)
do_thanks_add.onreadystatechange = function () {
if (do_thanks_add.handler.readyState == 4 && do_thanks_add.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_add.handler.responseText
}
}
do_thanks_add.send('showthread.php?do=post_thanks_ add_ajax&p='+pid)
}

function post_thanks_remove_all( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_'+pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_add_ajax&p='+pid)

do_thanks_remove_all = new vB_AJAX_Handler(true)
do_thanks_remove_all.onreadystatechange = function () {
if (do_thanks_remove_all.handler.readyState == 4 && do_thanks_remove_all.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_remove_all.handler.responseText
}
}
do_thanks_remove_all.send('showthread.php?do=post_ thanks_remove_all_ajax&p='+pid)
}

function post_thanks_remove_user( pid )
{
do_thanks_button = new vB_AJAX_Handler(true)
do_thanks_button.onreadystatechange = function () {
if (do_thanks_button.handler.readyState == 4 && do_thanks_button.handler.status == 200)
{
fetch_object('post_thanks_button_'+pid).innerHTML = do_thanks_button.handler.responseText
}
}
do_thanks_button.send('showthread.php?do=post_than ks_button_add_ajax&p='+pid)

do_thanks_remove_user = new vB_AJAX_Handler(true)
do_thanks_remove_user.onreadystatechange = function () {
if (do_thanks_remove_user.handler.readyState == 4 && do_thanks_remove_user.handler.status == 200)
{
fetch_object('post_thanks_box_'+pid).innerHTML = do_thanks_remove_user.handler.responseText
}
}
do_thanks_remove_user.send('showthread.php?do=post _thanks_remove_user_ajax&p='+pid)
}

document.write('<a href="#" id="post_thanks_button_$post[postid]" onclick="post_thanks_give( $post[postid] ); return false;"> <img src="images/buttons/post_thanks.gif" alt="Thanks" border="0" /></a>');
//-->
</script>
<noscript>
<a href="showthread.php?do=post_thanks_add&amp;p=$post[postid]"> <img src="images/buttons/post_thanks.gif" alt="Thanks" border="0" /></a>
</noscript>

Problems with the above so far: the call back doesn't work, so it doesn't properly achieve the ajax effect, and the remove functions doesn't work for whatever reason... do NOT, I repeat do NOT deploy / test the above on your production board. Hopefully someone can fine tune it to work and this hack would be perfect ;)
I'll try to figure this out when I have time. Right now I'm working on something for my 'Form Hack'. Something that can generate a form so people who dont understand php or html be able to get a custom form for their site.

[Milad]

Google clicks Thanks Button ...

So I added the green text to post_thanks_button template

<a href="showthread.php?$session[sessionurl]do=post_thanks_add&amp;p=$post[postid]" id="post_thanks_button_$post[postid]" onclick="post_thanks_give_$post[postid](); return false;" rel="nofollow">$post_thanks_button_image</a>

[Abe1]

Google clicks Thanks Button ...

So I added the green text to post_thanks_button template

<a href="showthread.php?$session[sessionurl]do=post_thanks_add&amp;p=$post[postid]" id="post_thanks_button_$post[postid]" onclick="post_thanks_give_$post[postid](); return false;" rel="nofollow">$post_thanks_button_image</a>
Why would it click 'thanks'? Only if you have a userID will the thanks link show. So if google is searching, the that button and link wont be there.

[Milad]

the visitors don't see the button picture but the link is still existing
take a look at the source of this page http://www.basharialep.com/forum/showthread.php?t=1259

<a href="showthread.php?do=post_thanks_add&amp;p=14350" id="post_thanks_button_14350" onclick="post_thanks_give_14350(); return false;" rel="nofollow"></a>

I added rel="nofollow" but spiders are still clicking it :(

Thanks for your help

[Abe1]

the visitors don't see the button picture but the link is still existing
take a look at the source of this page http://www.basharialep.com/forum/showthread.php?t=1259

<a href="showthread.php?do=post_thanks_add&amp;p=14350" id="post_thanks_button_14350" onclick="post_thanks_give_14350(); return false;" rel="nofollow"></a>

I added rel="nofollow" but spiders are still clicking it :(

Thanks for your help
I still dont understand. I dont see it source code, but even if they did click, it would just return them since they have no userID.

[Milad]

On WHO Google faces no permission errors

and I don't prefer this to happen because It's better if he indexes a new page instead

really you dont see this in my page source?

<a href="showthread.php?do=post_thanks_add&amp;p=14350" id="post_thanks_button_14350" onclick="post_thanks_give_14350(); return false;" rel="nofollow"></a>

[Abe1]

On WHO Google faces no permission errors

and I don't prefer this to happen because It's better if he indexes a new page instead

really you dont see this in my page source?
I found it in there but dont know what to do about it.

[HuangA]

Abe> Search engines gets the same HTML as guests (unless there are hacks that forwards it to archive); however, as opposed to guests, Search Engines sees it at raw source level, doesn't matter whether or not the icon is 'displayed' on screen. And it sees in the HTML there's a link, so it follows. Adding the rel="nofollow" in the a href tag tells it to not follow the link all together. I've gone ahead and added it to my forum now. :)

As to WHY it still clicks it, it may be a cached version of your page or something. It should stop after a while...

[Milad]

As to WHY it still clicks it, it may be a cached version of your page or something. It should stop after a while...

I hope that, and you agree with me that if I add it, spiders wouldn't click it. don't you?

I found it in there but dont know what to do about it.
Add it as we did

Thank you

[D.Ilyin]

Abe1 hi, it's not a BUG but.....
When using this hack you can:
1. Click "Add reputation"
2. and then click Thanks button.
BUT:
1. when you already clicked Thanks button
2. You can't add reputation.
May be add option "Check if already added reputation" ?

And another sugestion.....
Some users are "maniaks" and click thanks button for peoples who helped them once time in many different posts.
It it possable to link with a $vbulletin->options['reputationrepeat'] for chek?

Regards,
Dmitriy

[Abe1]

Abe1 hi, it's not a BUG but.....
When using this hack you can:
1. Click "Add reputation"
2. and then click Thanks button.
BUT:
1. when you already clicked Thanks button
2. You can't add reputation.
May be add option "Check if already added reputation" ?

And another sugestion.....
Some users are "maniaks" and click thanks button for peoples who helped them once time in many different posts.
It it possable to link with a $vbulletin->options['reputationrepeat'] for chek?

Regards,
Dmitriy
Please explain the first request a little better.

As for the second, what would that help? You can give rep points only once per post for using the thanks button.

[D.Ilyin]

Please explain the first request a little better.

As for the second, what would that help? You can give rep points only once per post for using the thanks button.
about first.... well.....My users can add reputation and then click Thanks button (it add reputation too) for a one post.... But when we try to click Thanks and after add reputation (with own forum functions) they get error:
"You have already add reputation bla-bla-bla"
Can you add checking for "smart" users that they can't add reputation and then click Thanks?

About second...... for now i do not know how say it with different words :(
My English has very low level.

[Abe1]

about first.... well.....My users can add reputation and then click Thanks button (it add reputation too) for a one post.... But when we try to click Thanks and after add reputation (with own forum functions) they get error:
"You have already add reputation bla-bla-bla"
Can you add checking for "smart" users that they can't add reputation and then click Thanks?

About second...... for now i do not know how say it with different words :(
My English has very low level.
I understand now. I will add it to the list.

[HuangA]

I hope that, and you agree with me that if I add it, spiders wouldn't click it. don't you?

I do believe so. Spiders -- espeically google -- are taught to not follow the rel="nofollow" links. I really don't see why its following it other than a cached version of the link. Double check your html on the frontend as whatever Google's access level is (AKA, guest, logout; unless you've applied other hacks) and view the source to see if things are coming up correctly, and if it does, then ignore it for a few days and see if things change for the better.

[jilly]

Is there a way I can make an option in a member's user cp to choose whether to view the 'thanks' added to a post or not? Some of my members on slower connections are telling me on a post with a lot of thanks, it is slowing their page load down. So I'd like to give them the option to not view the thanks area.
Thanks!
jilly

[Abe1]

Is there a way I can make an option in a member's user cp to choose whether to view the 'thanks' added to a post or not? Some of my members on slower connections are telling me on a post with a lot of thanks, it is slowing their page load down. So I'd like to give them the option to not view the thanks area.
Thanks!
jilly
You can do it yourself.

1) Make a new profile option with a yes or no option.

2) open the post_thanks_postbit and put if tags around the whole thing.

[jilly]

You can do it yourself.

1) Make a new profile option with a yes or no option.

2) open the post_thanks_postbit and put if tags around the whole thing.

Okay cool - I understand most, but I dont know exactly how to word the if statement - can you tell me what the if statement should be?

[Abe1]

Okay cool - I understand most, but I dont know exactly how to word the if statement - can you tell me what the if statement should be?
something like this.

<if condition="$bbuserinfo[userfieldxx]">

[jilly]

Okay I did that, but I set the profile field to be a single selection radio button, with a yes or no option to show 'thanks' on posts - and it works, but both options hide the thanks - when I set it to 'no', meaning to not show the thanks, it does not show them, then when I set it to 'yes' which means it should show the thanks, it still does not show them.

I guess I need some sort of==yes sort of thing in there - I just dont know enough about php to figure it out myself yet - thank you so much for helping me with this!

[Abe1]

Okay I did that, but I set the profile field to be a single selection radio button, with a yes or no option to show 'thanks' on posts - and it works, but both options hide the thanks - when I set it to 'no', meaning to not show the thanks, it does not show them, then when I set it to 'yes' which means it should show the thanks, it still does not show them.

I guess I need some sort of==yes sort of thing in there - I just dont know enough about php to figure it out myself yet - thank you so much for helping me with this!
No, you dont need the equalls. If the option is set to know, it should equal zero which will make the if not show.

[putergirl]

hello, I'm sorry to bother you with this, but I can't find MEMBERINFO in the styles to make the last change to this hack. Can someone please tell me where it is? Thanks. :)

[jilly]

oh i see - i need to make the option a one choice thing, not radio button - just one checkbox that can be cheked on or off - goin gto try that noe

putergirl, look in your main style, > edit templates > look for a list called Member Info Templates - expand that - MEMBERINFO should be the first option when in that group

[putergirl]

jilly thank you! I found it! :D

[jilly]

Okay Abe1, what am I doing wrong? It still does not show the thanks either way, if the option is set to yes or no - here's what I have set up:

[Abe1]

Okay Abe1, what am I doing wrong? It still does not show the thanks either way, if the option is set to yes or no - here's what I have set up:
Use the Radio buttons. Set one to yes and one to no.

use this if condition:

<if condition="$post['fieldXX'] == 'yes'">

[magic168]

Abe,

This hack is exactly what I need, but I don't want it to say "Thanks" but rather something like "I Installed" -- how many things will I have to change (I can change the button easily) so it doesn't say "Thanks!" And can you point me to all the things?

[Abe1]

Abe,

This hack is exactly what I need, but I don't want it to say "Thanks" but rather something like "I Installed" -- how many things will I have to change (I can change the button easily) so it doesn't say "Thanks!" And can you point me to all the things?
1) You can chenge the button.

2) You can edit the phrases.

Not hard at all to do.

[jilly]

Got a question about the postbit

It says "Thanks" x
Then right below it says
"Has been thanked x times in x posts".
Is the first "Thanks" how many thanks the person has given out?

[Abe1]

Got a question about the postbit

It says "Thanks" x
Then right below it says
"Has been thanked x times in x posts".
Is the first "Thanks" how many thanks the person has given out?
The first thanks is like posts. Just like posts shows the amout of posts a user posted, thanks shows how many thanks a user gave.

[Brandon Sheley]

the button didn't show for me ?

[Abe1]

the button didn't show for me ?
Did you look at some-one elses post or your own? It wont show on your own post.

[SecTa]

Greetings, Abe1. First of all, thank You for creating and constantly updating this wonderful hack!

I have couple of questions...
As far as i understood, reputation points given by "thanks" are separated from usergroup reputation premissions, ie: if user, who is not premitted tho add reputation points, press "thanks" button, author of thanked post will still get RP... Is that right?
When i enable x RP per "thanks" feature, users with lots of thanks still have no RP. Only "thanks" maded after enabling the feature are counted. How can i convert all existing users' thanks to reputation points?

[Abe1]

Greetings, Abe1. First of all, thank You for creating and constantly updating this wonderful hack!

I have couple of questions...
As far as i understood, reputation points given by "thanks" are separated from usergroup reputation premissions, ie: if user, who is not premitted tho add reputation points, press "thanks" button, author of thanked post will still get RP... Is that right?
When i enable x RP per "thanks" feature, users with lots of thanks still have no RP. Only "thanks" maded after enabling the feature are counted. How can i convert all existing users' thanks to reputation points?
You can't just do this. You would have to use the count and give rep points and reasons. I can't realy help you with this.

[SecTa]

Mybe some sql query can handle this? eg, if i want users to gain 1 RP per "thanks" then run some query that will make user's "thanks" amount = to user's RP*1?

[Abe1]

Mybe some sql query can handle this? eg, if i want users to gain 1 RP per "thanks" then run some query that will make user's "thanks" amount = to user's RP*1?
Like I said, it can be done. Just you need someone in your mysql to do it and make sure it works good. I don't have the time to do such a thing right now.

[Murty]

Hey, awesome mod :D i have installed it,

just an idea for the future, is it possible to somehow integrate it with the reputation system, so when you thank someone, it also gives them reputation, with the comment 'thanks'?

please let me know if you dont understand.

[Abe1]

Hey, awesome mod :D i have installed it,

just an idea for the future, is it possible to somehow integrate it with the reputation system, so when you thank someone, it also gives them reputation, with the comment 'thanks'?

please let me know if you dont understand.
AWSOME IDEA!

But, it's added already. Check the options in your ACP.

[Murty]

lol thanks

but i wander, if it can be set so if a user says 'thanks', instead of giving the reputation that is set, could it be set so is uses the reputation power from the user? if you comprende?

[Abe1]

lol thanks

but i wander, if it can be set so if a user says 'thanks', instead of giving the reputation that is set, could it be set so is uses the reputation power from the user? if you comprende?
I'll look into this.

[redlabour]

Will it work in the Future with vBulletin 3.6 (http://www.vbulletin.com/forum/showthread.php?t=187654) ?

[Abe1]

Will it work in the Future with vBulletin 3.6 (http://www.vbulletin.com/forum/showthread.php?t=187654) ?
Will check it out in the comming days but it should work with it already.

[stinger2]

lets say i enabled add reputaion feature.....is there a way to include the old thanked in the reputation

for example...i had 300 thanked posts...so i enable add to reputation today...and i get 10 points ....you thank me 10 times ..i become 20 points...

is there a way to add the old thanked to make it 320??

am i making sense? lol

[Abe1]

lets say i enabled add reputaion feature.....is there a way to include the old thanked in the reputation

for example...i had 300 thanked posts...so i enable add to reputation today...and i get 10 points ....you thank me 10 times ..i become 20 points...

is there a way to add the old thanked to make it 320??

am i making sense? lol
At the presant time, there is no way. I may have it work with the recount of reputations or a separate re-counter.

[stinger2]

thanks for considering that abe1

[sybakaos]

Is there a possibility to add a [img] filter? In such a case the thanks button only appears on posts where images are posted?

Thanks for the AJAX hack, it works superb. Clear coding also :).

[IrPr]

Abe1
didnt show Thanks and Thank button in showpost script?

[IrPr]

Edit: in fact is it possible to get this on showpost.php ?

[Abe1]

Edit: in fact is it possible to get this on showpost.php ?
Right now, no. I may include it in later versions.

[rogersnm]

it works fine on my live 3.6 board - http://forums.perfectforce.com - but i did have to make one template edit and that was:

In post_thanks_postbit_legacy or post_thanks_postbit
FIND
$spacer_open
<div style="padding:0px 0px $stylevar[cellpadding]px 0px">
and REMOVE
then FIND
</div>
$spacer_close
And REMOVE

and then it'll work.... well it worked in the first place it's just it messed up the table.

or just allow overide and import the xml file attached. I also linked it back to this thread.

[IrPr]

I'm waiting :)
Thanks ABE1

[rogersnm]

what exactly are you waiting for?

[bairy]

what exactly are you waiting for?



in fact is it possible to get this on showpost.php ?
Right now, no. I may include it in later versions.
That, probably.

[Abe1]

it works fine on my live 3.6 board - http://forums.perfectforce.com - but i did have to make one template edit and that was:

In post_thanks_postbit_legacy or post_thanks_postbit
FIND
$spacer_open
<div style="padding:0px 0px $stylevar[cellpadding]px 0px">
and REMOVE
then FIND
</div>
$spacer_close
And REMOVE

and then it'll work.... well it worked in the first place it's just it messed up the table.

or just allow overide and import the xml file attached. I also linked it back to this thread.
Thanks for the heads up. I hope to work on this hack for vb3.6 in the comming days.

[Valter]

I wish to invite "Post Thank You Hack" users to try out my "Advanced Forumhome Statistics" where "Most Thanked" members are included:
https://vborg.vbsupport.ru/showthread.php?t=118374


Regards,

Cyb

[bollie]

I have installed the hack, but I see no button standing on the forum.

[Abe1]

I have installed the hack, but I see no button standing on the forum.
Did you do the template edits? Are you looking at your post or some other user?

[bollie]

Yes I have all done this.

[Stubager]

Hi,

I have just updated my Post Thank-hack from a previous version. It has allways worked perfectly but I just wanted my users to remove the thank, now they can.

But another problem comes up. Look at the pictures. When I push the Thank-button the header of the site or something shows up. You can see it, it looks very awful. But when I just push the F5 button the header goes away under the post and it looks normal again.

I use vBadvanced but it has never been a problem

Well it is a little annoying problem I hope someone can fix!

Anyways thanks for this awsome hack :bunny:

Steffen Stubager
http://www.fodboldforum.dk

[Abe1]

Hi,

I have just updated my Post Thank-hack from a previous version. It has allways worked perfectly but I just wanted my users to remove the thank, now they can.

But another problem comes up. Look at the pictures. When I push the Thank-button the header of the site or something shows up. You can see it, it looks very awful. But when I just push the F5 button the header goes away under the post and it looks normal again.

I use vBadvanced but it has never been a problem

Well it is a little annoying problem I hope someone can fix!

Anyways thanks for this awsome hack :bunny:

Steffen Stubager
http://www.fodboldforum.dk
I'm unsure why thing would happen. May have to do with another hack to have installed.

[Sculli]

There is a problem when removing this hack completely.
It doesn't remove the : below the current post count in the profile.

Also getting multiple of these:
Database error in vBulletin 3.5.4:

Invalid SQL:
SELECT * FROM post_thanks WHERE postid IN
(0,427042,427047,427125,427142,427205,427226,42724 1,427296,427306,427332) ORDER BY
username ASC;

MySQL Error : Table 'qcdnorg_qcdnvb.post_thanks' doesn't exist
Error Number : 1146
Date : Wednesday, June 14th 2006 @ 08:04:42 PM
Script : http://www.qcdn.org/showthread.php?t=28919
Referrer : http://www.qcdn.org/forumdisplay.php?f=11
IP Address : x.x.x.x
Username : TLOC
Classname : vb_database


Database error in vBulletin 3.5.4:

Invalid SQL:
SELECT * FROM post_thanks WHERE postid IN (0) ORDER BY username ASC;

MySQL Error : Table 'qcdnorg_qcdnvb.post_thanks' doesn't exist
Error Number : 1146
Date : Wednesday, June 14th 2006 @ 08:04:42 PM
Script : http://www.qcdn.org/newreply.php
Referrer :
IP Address : x.x.x.x
Username : Brin
Classname : vb_database
etc etc etc, have about 70 of them by now.
After uninstalling the hack through the product manager.

Please advise. Thanks in advance.

[Abe1]

There is a problem when removing this hack completely.
It doesn't remove the : below the current post count in the profile.

Also getting multiple of these:
Database error in vBulletin 3.5.4:

Invalid SQL:
SELECT * FROM post_thanks WHERE postid IN
(0,427042,427047,427125,427142,427205,427226,42724 1,427296,427306,427332) ORDER BY
username ASC;

MySQL Error : Table 'qcdnorg_qcdnvb.post_thanks' doesn't exist
Error Number : 1146
Date : Wednesday, June 14th 2006 @ 08:04:42 PM
Script : http://www.qcdn.org/showthread.php?t=28919
Referrer : http://www.qcdn.org/forumdisplay.php?f=11
IP Address : x.x.x.x
Username : TLOC
Classname : vb_database


Database error in vBulletin 3.5.4:

Invalid SQL:
SELECT * FROM post_thanks WHERE postid IN (0) ORDER BY username ASC;

MySQL Error : Table 'qcdnorg_qcdnvb.post_thanks' doesn't exist
Error Number : 1146
Date : Wednesday, June 14th 2006 @ 08:04:42 PM
Script : http://www.qcdn.org/newreply.php
Referrer :
IP Address : x.x.x.x
Username : Brin
Classname : vb_database
etc etc etc, have about 70 of them by now.
After uninstalling the hack through the product manager.

Please advise. Thanks in advance.
It should remove the plug-in. Do you have a hack the caches plug-ins? If yes, this hack would be causing the problem.

[bollie]

I have installed the hack, but I see no button standing on the forum.

I do not see the button on forum, however, in members profile to see I the hack.
The Templates have been adapted.
Also plugin are placed.
What it is able be?

[Sculli]

It should remove the plug-in. Do you have a hack the caches plug-ins? If yes, this hack would be causing the problem.No hack caching installed.

I believe that the mySQL errors were generated during uninstall (I didn't shut the board down while I uninstalled). I didn't get any more mySQL errors since I last posted here.

The : below the post count is still there though, will start looking through the templates to see how to get rid of it.

[Abe1]

No hack caching installed.

I believe that the mySQL errors were generated during uninstall (I didn't shut the board down while I uninstalled). I didn't get any more mySQL errors since I last posted here.

The : below the post count is still there though, will start looking through the templates to see how to get rid of it.
Look at the installation text file. It has the template changes you made.

[Sculli]

Doh, thanks, I totally forgot that there were template changes too, makes sense.

Thanks again, I thought it was a great hack, but a bunch of my members didn't like the accumulations of "thanks" under posts as they found the display to be disruptive in terms of reading the thread, so I uninstalled.

[tvsf]

I don't know why but when I edit postbit_legacy, the thanks button and stats don't show up on the first post. So I had to follow the exact same instructions and paste everything into my postbit_first template to get it to show. Is anyone else experiencing this problem?

[Abe1]

I don't know why but when I edit postbit_legacy, the thanks button and stats don't show up on the first post. So I had to follow the exact same instructions and paste everything into my postbit_first template to get it to show. Is anyone else experiencing this problem?
Do you have a hack that puts the first post on every page? If yes, you have to edit that template also.

[Stubager]

I'm unsure why thing would happen. May have to do with another hack to have installed.

Well it worked before I updated to the latest version of Post Thank... :S

[Abe1]

Well it worked before I updated to the latest version of Post Thank... :S
I think I know how to fix this. It has to do with a hack adding things to your output, like that side bar. I'll see if I can release an update now.

[Abe1]

Version 4.5 (6/19/06):

[FIXED] Bug with AJAX if you had hacks that added things to your output.

[Stubager]

Thanks! It works now!

[BANDiT600]

Abe1, how to upgrade, what to replace???

[D.Ilyin]

Abe1, how to upgrade, what to replace???no temlate changes needed. Just reimport XML.

[jilly]

I made a thanks button the same size as the edit and reply buttons for the standard vb style - attaching here if anyone is interested...

[rogersnm]

whats that for? the standard version is already attached, is that just for your custom skin?

[Schahab]

Very GOOD Job! I like the hack really! But i have a little problem, as you can see here for example:

http://www.worldofhiphop.de/community/videos-bilder-musik/13916-house-unit-japan.html

When you go with your mouse over the Thank you Button called "Danke" the background is getting green, because the hover link effect, but with the other buttons it don't appears. What to do?

[ForYou]

Hello ,

Is the post thank work on 3.6.0 Beta3 !!

Becuase i can't click on the buttom to thank user ,


Is there any help , I don't need to use Ajax , Becuase it didn't work with arabic font :( !!

Regards

[Abe1]

Very GOOD Job! I like the hack really! But i have a little problem, as you can see here for example:

http://www.worldofhiphop.de/community/videos-bilder-musik/13916-house-unit-japan.html

When you go with your mouse over the Thank you Button called "Danke" the background is getting green, because the hover link effect, but with the other buttons it don't appears. What to do?
I can't help you if you are using a differant style.

[Abe1]

Hello ,

Is the post thank work on 3.6.0 Beta3 !!

Becuase i can't click on the buttom to thank user ,


Is there any help , I don't need to use Ajax , Becuase it didn't work with arabic font :( !!

Regards
I didn't look into vb 3.6 yet.

[edeline]

hi

i have a problem after install the hack.
Thanks buttons didn't showed up , only text link : Thanx

can you help me please :)

[rogersnm]

Make sure the image that you were supposed to upload is in the right place otherwise it will use alternate text. Which happend to be "Thanks"

[edeline]

It is in the right place : images/buttons

[rogersnm]

give me a link to your forums.

[edeline]

give me a link to your forums.

in your PM

Thanx

[Traxdata]

Does not work on my forum with vB 3.6

[rogersnm]

You have the pic in: http://www.indowpm.com/forum/images/buttons/thanks.gif
where as you need the pic in: http://www.indowpm.com/forum/images/neocolorsII/buttons/post_thanks.gif

[rogersnm]

Does not work on my forum with vB 3.6

It should, It works fine for me. Did you do a straight off install or an upgrade?

[edeline]

You have the pic in: http://www.indowpm.com/forum/images/buttons/thanks.gif
where as you need the pic in: http://www.indowpm.com/forum/images/neocolorsII/buttons/post_thanks.gif


ahhh okeee

thank you :)

[Traxdata]

It should, It works fine for me. Did you do a straight off install or an upgrade?
Hi Roger,
I upgraded to 3.6, reverted my templates - changed them again, uploaded thankyou xml, but there is nothing to see.

[rogersnm]

hmm, read the pm.

[kafi]

Hi I am using this hack and it is one of the best .-)

However I have some problem with GARS and Post Thank you. If the article has too many replies I am getting this error:
Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 136

Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 146

Can anybody suggest what is wrong here? I have asked at TheVbGeek but Geek is saying that his code is not that long and that there might be conflict with other hack. I persume that conflict is with PostThankYou hack.

Thank you!

[bollie]

The problem has been solved

[Abe1]

Try using the post thanks recounters.

[futuredood]

this is an AWESOME hack. thanks, worked perfectly except for one minor issue.. the links don't work properly with vrewrite (seo). i dunno if i should look for help here, or in vrewrite, but if anyone knows it would be helpful.

thanks for the hack!

[Polo]

Hi,

As I have a christian website, I use this hack as a "praying" button.... you see, people at our website, have prayer requests and we always have users replying you know "praying" so with this button, instead of a "thank you" i modify it with a custom button that says "praying" and users find it really neat. :) (just wanted to share I we use this hack at our site)

I will definetly be installing this hack :)

[mtha]

very useful hack

I have some problem. My board has about 1,000,000 posts, and I am trying to "FIND ALL THANKS" (search.php?do=findallthanks), it takes very long (almost a minute) to generate the result (with only few thanks that I have)

Showing results 1 to 3 of 3
Search took 53.35 seconds; generated 1 minute(s) ago

Should that be improved? I think it's fairly easy (and fast) searching in post_thanks table, or index some of the information?

[s3xt0y]

to bad this forum dont use it id thank you for it!

lol im such a funny guy anyway good mod +install =P

[mtha]

Hello,

The hack is great, and I am trying to get the best use of it.

REQUEST:
I would like to have a confirmation before sending the thanks. Says when a user click on Thanks, there is a pop-up asking that you really want to thank, with some guideline on how the post should be, in order to get thanked.

This will reduce people from clicking thanks, without understanding meaning of the action => you have a better/qualify statistic.

Also, allow member to add some comments to go with the thanks, that'd be nice.

I also want to be able to get a list of thanked posts in some given forum (find thanks where forum = xxx)

How do you think?

[Abe1]

very useful hack

I have some problem. My board has about 1,000,000 posts, and I am trying to "FIND ALL THANKS" (search.php?do=findallthanks), it takes very long (almost a minute) to generate the result (with only few thanks that I have)


Showing results 1 to 3 of 3
Search took 53.35 seconds; generated 1 minute(s) ago


Should that be improved? I think it's fairly easy (and fast) searching in post_thanks table, or index some of the information?
I'll see what I can do.

[Abe1]

Hello,

The hack is great, and I am trying to get the best use of it.

REQUEST:
I would like to have a confirmation before sending the thanks. Says when a user click on Thanks, there is a pop-up asking that you really want to thank, with some guideline on how the post should be, in order to get thanked.

This will reduce people from clicking thanks, without understanding meaning of the action => you have a better/qualify statistic.


Also, allow member to add some comments to go with the thanks, that'd be nice.

I also want to be able to get a list of thanked posts in some given forum (find thanks where forum = xxx)

How do you think?
I dint think I'll do most of these. I'll see about the search though.

Almost one-one else would like the pop-up.

[ntock]

Abe, thanks for the great mod, love it. Is there anyway for board admins like myself who have already cluttered the user info to the left of the post and make it:

Thanked x Times

instead

Thanks: x
Thanked x Times in x Posts

Many thanks again for the mod :) Cheers

[rogersnm]

Just take away the info you don't need....

[Abe1]

just edit the template.

[ntock]

Unfortunately I don't know how to, assuming I need to delete some of these lines?:

<!-- Start Post Thank You Hack -->
<if condition="$post[userid]">
<br />
$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]
<br />
<if condition="$post[post_thanks_thanked_times_on] == 1">
$vbphrase[post_thanks_time_post]
<else />
<if condition="$post[post_thanks_thanked_posts_on] == 1">
<phrase 1="$post[post_thanks_thanked_times]">$vbphrase[post_thanks_times_post]</phrase>
<else />
<phrase 1="$post[post_thanks_thanked_times]" 2="$post[post_thanks_thanked_posts]">$vbphrase[post_thanks_times_posts]</phrase>
</if>
</if>
</if>
<!-- End Post Thank You Hack -->

Thank you for any help in advance...

[Abe1]

Unfortunately I don't know how to, assuming I need to delete some of these lines?:

<!-- Start Post Thank You Hack -->
<if condition="$post[userid]">
<br />
$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]
<br />
<if condition="$post[post_thanks_thanked_times_on] == 1">
$vbphrase[post_thanks_time_post]
<else />
<if condition="$post[post_thanks_thanked_posts_on] == 1">
<phrase 1="$post[post_thanks_thanked_times]">$vbphrase[post_thanks_times_post]</phrase>
<else />
<phrase 1="$post[post_thanks_thanked_times]" 2="$post[post_thanks_thanked_posts]">$vbphrase[post_thanks_times_posts]</phrase>
</if>
</if>
</if>
<!-- End Post Thank You Hack -->

Thank you for any help in advance...
Delete:
$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]
<br />

Also, edit the phrases post_thanks_time_post, post_thanks_times_post, and post_thanks_times_posts and remove the part you dont want.

[hilfe-forum]

install Thanks!

My Users Love it

[almqdad]

hello

is there away to make thanking possible on first post and all post

thanks

[almqdad]

hello

getting a serious error

Parse error: syntax error, unexpected T_ENCAPSED_AND_WHITESPACE, expecting T_STRING or T_VARIABLE or T_NUM_STRING in /home/alhawzan/public_html/forum/includes/class_postbit.php(283) : eval()'d code on line 2

Parse error: syntax error, unexpected T_ENCAPSED_AND_WHITESPACE, expecting T_STRING or T_VARIABLE or T_NUM_STRING in /home/alhawzan/public_html/forum/includes/class_postbit.php(283) : eval()'d code on line 2

this error comes only when I use Legacy (Vertical) Postbit Template

please help

thanks

[Abe1]

hello

getting a serious error



this error comes only when I use Legacy (Vertical) Postbit Template

please help

thanks
Did you try to re-count the thanks. You will find them in your ACP by the recounters.

[almqdad]

hello


Did you try to re-count the thanks. You will find them in your ACP by the recounters

no


as I said
this error comes only when I use Legacy (Vertical) Postbit Template

Uninstall for now until a solution found

thanks

[Abe1]

hello




no


as I said
this error comes only when I use Legacy (Vertical) Postbit Template

Uninstall for now until a solution found

thanks
Try the recount.

[Tulsa]

Abe, on this one and the groan hack, (still my personal favorite), when we updgrade to 3.6 once it goes gold, are we going to be able to port this hack and the thanks/groans received/given? Or are we simply going to lose those?

[-=Sniper=-]

3.6 RC1 I'm using it, not had any problems reported yet!

[Hornstar]

Request

Currently I am also using the warning system, if anyone abuses the thanks button by thanking everyone for no reason they get warned.

Then here is the problem/request

I now have to click on the users profile, find all thanks they have given, and delete them 1 by 1. Very painful.


I would find it much easier if there was an option in the admincp that would allow you to prune all thanked posts / all thanks given by username.

Also, When a user has been thanked many times, Sometime I would like to remove someones thanks, but currently you can only remove yours or ALL. It would be handy to remove a selected thanks.

Hopefully you will consider these ideas for the next update.

I'm sure everyone would find them really handy to have for this already great release.

Thanks

[Abe1]

Abe, on this one and the groan hack, (still my personal favorite), when we updgrade to 3.6 once it goes gold, are we going to be able to port this hack and the thanks/groans received/given? Or are we simply going to lose those?
Everything will stay. You can even upgrade with this hack installed. After you can upload the new version to be released.

[Schahab]

Hello,

for me the Show all Thanks Link in the Memberprofiles don't work:

Example: http://www.worldofhiphop.de/community/search.php?do=Suche nachthanks&u=15775

I use the German Edition, what can I do?

[tvsf]

is there a way to make it so that members won't be able to see post content before pressing thanks?

[bashy]

How would they know what there thanking?

is there a way to make it so that members won't be able to see post content before pressing thanks?

[camuca]

nice hack - installed and work well...

[mix_boy]

http://foto.uploader.pl/images/2122ssss.JPG

Pleas Help me.
why I do not know not work.

[cheekymonkey2]

Thanks a lot for this.

Installed very easily and all is ok.

[unitedpunjab]

anyone using it on 3.6 rc2

[TygerTyger]

I am using it on RC2, not explored it fully yet but there are no obvious problems that I can see. No guarantees though. ;)


Also, When a user has been thanked many times, Sometime I would like to remove someones thanks, but currently you can only remove yours or ALL. It would be handy to remove a selected thanks.


That would be wonderful indeed to have. :)

[TygerTyger]

Ok, I do have a small problem. What is the $post_thanks string to show how many thanks a post has received? Just the post, not the overall total. No matter what I do I seem to end up with a user's total thanks and I can't see the correct phrase in the XML file either. If you could name the $post_groan string that does the same thing for groans, I would be very grateful. :)

And thank you for an exceptionally useful hack.

[Abe1]

anyone using it on 3.6 rc2
I have a new version ready to release when 3.6GOLD is released. It only contains a template edit. I dont recall needing any php edits.

[TygerTyger]

Ohhhhhhhhh wait a second, I misread it. It only counts how many thanks a post gets but you can't actually show how many thanks a post gets? It's not phrased. Or if it's not good for the database to be able to use per-post counts instead of over-all counts.

Would it be outrageous to promise that you will be showered with a thousand young maidens and the people will line the streets with rose petals wherever you walk from this point onwards if you phrased thanks/growls per post? That would be absolutely fantastic, on mah knees beggin'. :D :D :D :D :D

[Amaranth]

This is really impressive stuff! :D *presses Thanks button*

If I could make a big wish for this mod, it would be to be able to show all the post a member has Thanked. "Find all posts thanked by Abe1."

Secondly, it would be fun to be able to "Find all posts thanked by my buddies."


What do you think, Abe1? Do you think this would be hard?

[laskos]

i have read all this thread and still cannot get the button to show no matter what i do :(

[RFViet]

How to allow guests to post Thanks ??

[Amaranth]

One of my members also suggested that it would be cool to be able to set a minimum number of Thanks to qualify for display on the "Thanked" search page. And it would be great to display the number of thanks for each post, and be able to sort by the quantity of posts on this search/display page.

[Abe1]

This is really impressive stuff! :D *presses Thanks button*

If I could make a big wish for this mod, it would be to be able to show all the post a member has Thanked. "Find all posts thanked by Abe1."

Secondly, it would be fun to be able to "Find all posts thanked by my buddies."


What do you think, Abe1? Do you think this would be hard?
You should have a button in a members profile to view all of his thanks now.

[Abe1]

Ohhhhhhhhh wait a second, I misread it. It only counts how many thanks a post gets but you can't actually show how many thanks a post gets? It's not phrased. Or if it's not good for the database to be able to use per-post counts instead of over-all counts.

Would it be outrageous to promise that you will be showered with a thousand young maidens and the people will line the streets with rose petals wherever you walk from this point onwards if you phrased thanks/growls per post? That would be absolutely fantastic, on mah knees beggin'. :D :D :D :D :D
Not sure what you want. Please explain more.

[Abe1]

How to allow guests to post Thanks ??
Guests are not allowed to thank posts.

[Amaranth]

Thank you for your reply, Abe1! :) There is a link in every members profile that will display all the posts he/she has written, that have later been thanked by other members... But what we would love to have is a link that displays all the posts she herself has thanked, letting us find the posts that this member has found useful.

I also had another feature request from one of my members:
One of my members also suggested that it would be cool to be able to set a minimum number of Thanks to qualify for display on the "Thanked" search page. And it would be great to display the number of thanks for each post, and be able to sort by the quantity of posts on this search/display page.

[Abe1]

Thank you for your reply, Abe1! :) There is a link in every members profile that will display all the posts he/she has written, that have later been thanked by other members... But what we would love to have is a link that displays all the posts she herself has thanked, letting us find the posts that this member has found useful.

I also had another feature request from one of my members:
I'll see what I can do. I'm not looking realy into added new features until I release the version for vb 3.6.

[ohgenki]

is it possible if i do not want the users to be shown below the post bit? it is making the post browsing page longer.

what if:

- the user says thanks to the post
- there is a "your thanks has been accepted" alert
- the button changed from thanks to remove thanks?

is the above possible?

[ohgenki]

btw, i think this will be useful:

to allow the users to find thanked post by a particular user from the postbit/postbit_legacy, find:

<if condition="$show['search']">
<tr><td class="vbmenu_option"><a href="search.php?$session[sessionurl]do=finduser&amp;u=$post[userid]" rel="nofollow"><phrase 1="$post[username]">$vbphrase[find_more_posts_by_x]</phrase></a></td></tr>

and add:

<tr><td class="vbmenu_option"><a href="search.php?$session[sessionurl]do=findthanks&amp;u=$post[userid]" rel="nofollow"><phrase 1="$post[username]">$vbphrase[post_thanks_search_user]</phrase></a></td></tr>

below it

[mml770]

It's not showing on 3.6 after installation, I have version 2.0 Gold, is there a new version for 3.6 or this should also work for 3.6?

[TygerTyger]

Not sure what you want. Please explain more.

Hello there! Thank you for picking up on my request.

What I mean is, in the feature list at the top it says:
- Counts how many thanks a post gets

However, there is no way to display this. I would really, really love it if this could be phrased so it can be shown with a post. And the same with the post groan function, as they are husband and wife.

[Abe1]

Hello there! Thank you for picking up on my request.

What I mean is, in the feature list at the top it says:
- Counts how many thanks a post gets

However, there is no way to display this. I would really, really love it if this could be phrased so it can be shown with a post. And the same with the post groan function, as they are husband and wife.
It does already. Right above all the thanks it was the number of thanks the post has. If it is one or zero, it does not have a number.

[Abe1]

It's not showing on 3.6 after installation, I have version 2.0 Gold, is there a new version for 3.6 or this should also work for 3.6?
Try the current version. 2.0 is VERY old.

[TygerTyger]

It does already. Right above all the thanks it was the number of thanks the post has. If it is one or zero, it does not have a number.

Hm, perhaps this is not working as it should for some reason. Probably because of me. Or is it because it's 3.6RC3? Seems to be working fine though.

Right above all the thanks, according to your instructions, I have:


$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]


This is currently displaying how many posts that user has given in total across the whole forum. Below that I have:


<if condition="$post[post_thanks_thanked_times_on] == 1">
$vbphrase[post_thanks_time_post]
<else />
<if condition="$post[post_thanks_thanked_posts_on] == 1">
<phrase 1="$post[post_thanks_thanked_times]">$vbphrase[post_thanks_times_post]</phrase>
<else />
<phrase 1="$post[post_thanks_thanked_times]" 2="$post[post_thanks_thanked_posts]">$vbphrase[post_thanks_times_posts]</phrase>
</if>
</if>


Which is currently showing how many thanks that user has received in total from across the whole forum, and how many posts they received the thanks from.

Nothing is allowing me to show how many thanks an individual post has received.

[Abe1]

Hm, perhaps this is not working as it should for some reason. Probably because of me. Or is it because it's 3.6RC3? Seems to be working fine though.

Right above all the thanks, according to your instructions, I have:


$vbphrase[post_thanks_thanks]: $post[post_thanks_user_amount]


This is currently displaying how many posts that user has given in total across the whole forum. Below that I have:


<if condition="$post[post_thanks_thanked_times_on] == 1">
$vbphrase[post_thanks_time_post]
<else />
<if condition="$post[post_thanks_thanked_posts_on] == 1">
<phrase 1="$post[post_thanks_thanked_times]">$vbphrase[post_thanks_times_post]</phrase>
<else />
<phrase 1="$post[post_thanks_thanked_times]" 2="$post[post_thanks_thanked_posts]">$vbphrase[post_thanks_times_posts]</phrase>
</if>
</if>


Which is currently showing how many thanks that user has received in total from across the whole forum, and how many posts they received the thanks from.

Nothing is allowing me to show how many thanks an individual post has received.
The second one.

The first is showing how many this user gave.

[Jesus05uk]

Will this for for 3.6?

[Abe1]

Will this for for 3.6?
Yes.

[Abe1]

A new version for vB 3.6 was released here: https://vborg.vbsupport.ru/showthread.php?t=122944

[eilrahC]

Awsome, thanks so much :) ill be installing it on my Arcade forum!

[Spinball]

Getting this error on some theads in showthread.php:


Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 149

Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 159

Disabled for now. Any ideas?

[Abe1]

Getting this error on some theads in showthread.php:



Disabled for now. Any ideas?
Use the recounters for this hack.

[Muellmann]

I have this hack already installed and it works perfect!
Thank you for sharing, I pressed "Installed"! :cool:

Yet another question: In the ACP-options I can select, if a user
get something added to his/her postcount, if he/she pressed Thanks!

Now would I need, that an additional ACP-option exists, to add to user's reputation if he pressed Thanks!
Is it heavy to implement? I want let you know, that I would pay for it,
if you would add such feature for me, cause I need it in a project urgently.

[Abe1]

I have this hack already installed and it works perfect!
Thank you for sharing, I pressed "Installed"! :cool:

Yet another question: In the ACP-options I can select, if a user
get something added to his/her postcount, if he/she pressed Thanks!

Now would I need, that an additional ACP-option exists, to add to user's reputation if he pressed Thanks!
Is it heavy to implement? I want let you know, that I would pay for it,
if you would add such feature for me, cause I need it in a project urgently.
The option is there already.

[Spinball]

Use the recounters for this hack.
Thanks. Ran the first 3 recounters - made no difference. Running the last one and with 121,000 members, it's still going after about 10 hours.
2 questions. First, is this the recounter which will make the difference?
And second, is it possible to speed up the counter? Or do something else to fix this? Would hate to have to uninstall.

[Abe1]

Thanks. Ran the first 3 recounters - made no difference. Running the last one and with 121,000 members, it's still going after about 10 hours.
2 questions. First, is this the recounter which will make the difference?
And second, is it possible to speed up the counter? Or do something else to fix this? Would hate to have to uninstall.
I think the first 3 should have done it. The user one would make that error. Did you run them on order? Does the error show an every page?

[Spinball]

I think the first 3 should have done it. The user one would make that error. Did you run them on order? Does the error show an every page?
I ran them in order, the error does not show up on every page.

My server is rebooted daily in the early hours. The 4th recounter had been running for over 16 hours before it hung because of the reboot. And the problem persists. It's definitely the Thank You hack cos when I disable it the problem goes away.

Update : I re-ran the first three and again it made no difference.
I have switched off the thank you hack for now.
One example of where we are having problems is on the last page of this (http://www.avforums.com/forums/showthread.php?t=219868)thread.

[Spinball]

Bump? Any help?

[bryanb]

I've just upgraded to vBulletin 3.6 and upgraded the Thanks hack as well. The problem that I'm having is that the table row (The Following x Users Say Thank You to x_member For This Useful Post:) is not as wide as the posting itself.

What can I do to fix this? Thanks in advance!

[Schahab]

Search in templates for postbit thank and edit the file with width 100%

[IrPr]

Abe1 would u please code for showpost.php script ?

[bryanb]

Search in templates for postbit thank and edit the file with width 100%
Could you indicate exactly what I should edit and where? Thanks! :)

[Abe1]

I've just upgraded to vBulletin 3.6 and upgraded the Thanks hack as well. The problem that I'm having is that the table row (The Following x Users Say Thank You to x_member For This Useful Post:) is not as wide as the posting itself.

What can I do to fix this? Thanks in advance!
Just update to the vb 3.6 version.

[bryanb]

Just update to the vb 3.6 version.
I'm running vB 3.6 and Thank You Hack hack 4.5. I've reinstalled the hack just a few minutes ago and still the same thing. Here is an example:
http://www.casinomeister.com/forums/online-casinos/13707-win-bentley-2.html

I know I should place width=100% somewhere in a template, but I don't know exactly where.

[Abe1]

I'm running vB 3.6 and Thank You Hack hack 4.5. I've reinstalled the hack just a few minutes ago and still the same thing. Here is an example:
http://www.casinomeister.com/forums/online-casinos/13707-win-bentley-2.html

I know I should place width=100% somewhere in a template, but I don't know exactly where.
Look in my sig for the vb3.6 version. It's version 5.0 of this hack.

[Intocable]

For some reason, the icon for the Thanks in every post is not showing up. Anyone know what it could be?

[Abe1]

For some reason, the icon for the Thanks in every post is not showing up. Anyone know what it could be?
You have more then one style. You have to put the thanks button in each style's button folder.

[Amaranth]

Hi Abe1. Thanks for this great feature, it is very popular on my board.

One thing we have noticed, is that the restriction on giving reputation is not always taken into account in relation to this mod... If I post a Thank you, I am not able to give the author of the post further reputation points for that post. (Until I have given reputation to someone else, as I have configured my vBulletin) But if I give the author reputation points, and then try to post a Thank you - then the restriction is not taken into consideration, and I am able to give the author rep two times

... I hope this isnt't too vague..? Not a BIG problem, but I think you like to know about these things...

Thanks again!

[Abe1]

Hi Abe1. Thanks for this great feature, it is very popular on my board.

One thing we have noticed, is that the restriction on giving reputation is not always taken into account in relation to this mod... If I post a Thank you, I am not able to give the author of the post further reputation points for that post. (Until I have given reputation to someone else, as I have configured my vBulletin) But if I give the author reputation points, and then try to post a Thank you - then the restriction is not taken into consideration, and I am able to give the author rep two times

... I hope this isnt't too vague..? Not a BIG problem, but I think you like to know about these things...

Thanks again!
I hope to work on the rep system for this hack soon. But it will only be released to the version for vb3.6.

[iamnofear]

I received a blank page when I tried to import new product. May u help me ?

[magic168]

Something is majorly wrong and I can't figure it out. I had this working perfectly on my old forum, but then when I had to reinstall fresh, it doesn't work anymore on the new installation.

First off, no button appears. I viewed source and saw that it was not printing the $post_thanks_button_image variable. It starts off with an a href and ends with an /a with NO IMG SRC in between.

So I tried just copying the code for $post_thanjs_button_image into the $post_thanks_button variable...and the button shows up.

But the AJAX is all messed up for some reason.

Can you PM me for some help?

[Abe1]

Something is majorly wrong and I can't figure it out. I had this working perfectly on my old forum, but then when I had to reinstall fresh, it doesn't work anymore on the new installation.

First off, no button appears. I viewed source and saw that it was not printing the $post_thanks_button_image variable. It starts off with an a href and ends with an /a with NO IMG SRC in between.

So I tried just copying the code for $post_thanjs_button_image into the $post_thanks_button variable...and the button shows up.

But the AJAX is all messed up for some reason.

Can you PM me for some help?
Are you looking at a post you made? or at someone elses post?

[JohnBee]

Something is majorly wrong and I can't figure it out. I had this working perfectly on my old forum, but then when I had to reinstall fresh, it doesn't work anymore on the new installation.

First off, no button appears. I viewed source and saw that it was not printing the $post_thanks_button_image variable. It starts off with an a href and ends with an /a with NO IMG SRC in between.

So I tried just copying the code for $post_thanjs_button_image into the $post_thanks_button variable...and the button shows up.

But the AJAX is all messed up for some reason.

Can you PM me for some help?
Same here... very odd.
I have installed and ran this hack on my board since it was intro'd.
I installed a fresh vBB 3.55, installed the hack made the edits and uploaded the product.... no button :(

Is it possible this is a 3.5.5 issue?
Is it possible to hard code the button into the postbit template instead?

[magic168]

Actually, it is working now. I have no idea why but I:

1) Uninstalled the product.
2) cleared ALL the remaining templates (there seemed to be about three leftover...search for thanks in your templates)
3) Redownloaded the zip install file.
4) Reinstalled (making sure to keep "yes" to overwrite checked)

Now it is working...very odd.

[JohnBee]

Actually, it is working now. I have no idea why but I:

1) Uninstalled the product.
2) cleared ALL the remaining templates (there seemed to be about three leftover...search for thanks in your templates)
3) Redownloaded the zip install file.
4) Reinstalled (making sure to keep "yes" to overwrite checked)

Now it is working...very odd.

Wow! I will follow your advice, hope it works!

[Carl Anderson]

I really like this hack but it took up too much space on the pages and my users ended up not liking it...

If it just had a thanked 20 times and user could click on the 20 and then see who thanked him if he wanted.. It took too much space up as some would get 50 or more thx...

Oh well cool hack and well done.

[djwins]

I really like this hack but it took up too much space on the pages and my users ended up not liking it...

If it just had a thanked 20 times and user could click on the 20 and then see who thanked him if he wanted.. It took too much space up as some would get 50 or more thx...

Oh well cool hack and well done.Yeah, I could see this being an issue on large forums.

[Carl Anderson]

Yeah, I could see this being an issue on large forums.

Its not a super large forum but it is growing and we get 600 yo 800 posts a day.. It just started being too much showing all the handles of the posters thanking and I had the groans also installed? This is a very nice hack - it just did not work out on my site?

[Abe1]

Its not a super large forum but it is growing and we get 600 yo 800 posts a day.. It just started being too much showing all the handles of the posters thanking and I had the groans also installed? This is a very nice hack - it just did not work out on my site?
I may come up with a way to hide them. It would be released for the vb3.6 version though.

[Carl Anderson]

I may come up with a way to hide them. It would be released for the vb3.6 version though.

I have 3.6.2 so if you do I can use it, that would be great... I will keep an eye on the 3.6.2 thread for any updates...

Thx

Great Hack

[JohnGBSA]

I think Carl's idea is a really good one and would love to see it implimented.

That aside, is there any idea when a vB 3.6.3 compatible version will be realeased? I could not see if the current version is compatible.

Thanks,

John

[Abe1]

I think Carl's idea is a really good one and would love to see it implimented.

That aside, is there any idea when a vB 3.6.3 compatible version will be realeased? I could not see if the current version is compatible.

Thanks,

John
Go look in my sig for the vb3.6.x version.

[folkish]

Hack installed. Thanks!

[nasko]

I`m not shure is this the right place to ask but...

I have installed Post Thank You Hack 2.0 GOLD on my 3.5 forum but i get this error when i merge posts into one thread or separate threads:

Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 125

Warning: Invalid argument supplied for foreach() in /includes/class_postbit.php(251) : eval()'d code on line 135

How can i fix this? I reinstalled the hack but it removed all thanks from all my users. And this is my second question: can i bring back the oldest counts?

[srikanthjjjj]

Just some questions, WIth this can you hide stuff with this mod and when the user clicks thanks the user cna see what's hidden
and also does it display how many thanks the user has recieved and how many it's given/
CAn you also check all the posts the user has been thanks in?

[BraindGee]

Would it be possible to only allow the OP to thank?

Reason im asking is because ive been thinking of creating a question forum, where questions are submitted by a form, and replied to by people that know the answer. However, I'd kinda like it if only the person that posted the question can thank the person, or people that replied. Think this would prevent thank you boosting by having anyone who read it to thank him/her.

[hypnoticpimp]

Hey i installed your hack, but when i delete a forum form my admincp i get this error message

Database error in vBulletin 3.5.4:

Invalid SQL:
DELETE FROM hypnoticpimp_thanks WHERE postid IN (17110,0);

MySQL Error : Table 'wshh_midphase.hypnoticpimp_thanks' doesn't exist
Error Number : 1146
Date : Tuesday, February 6th 2007 @ 09:19:01 PM
Script : http://www.worldstarhiphop.com/forums/admincp/forum.php
Referrer : http://www.worldstarhiphop.com/forums/admincp/forum.php?do=remove&f=80&s=
IP Address : 65.35.217.105
Username : Hypnoticpimp
Classname : vB_Database

please help!

[Abe1]

Sorry, I dont give support for the vb3.5 version any more. Some of these things get fixed in the vb3.6 version

[dbirosel]

I've just upgraded to vBulletin 3.6 and upgraded the Thanks hack as well. The problem that I'm having is that the table row (The Following x Users Say Thank You to x_member For This Useful Post:) is not as wide as the posting itself.

What can I do to fix this? Thanks in advance!
I need help this problem too!! ^^


I see no code that involves with "width=" for this mod.

[Abe1]

I need help this problem too!! ^^


I see no code that involves with "width=" for this mod.
You customized the post thanks templates. You have to revert them.

[dbirosel]

Huh? I don't even understand what you said. You want me to revert my postbit?

[kellyandmike]

Nevermind. I was looking for the "thanks" button in my own post and you can't thank yourself so it's not there. It's time for a computer break!

[Apocalypz]

will this version still work with vbulliten 3.6.5?

[Abe1]

will this version still work with vbulliten 3.6.5?
No! go here https://vborg.vbsupport.ru/showthread.php?t=122944

[Rickie3]

hey all ive got a weird problem,I have a member who's count up is not showing in postbit properly it is stuck on "Thanked 1 Time in 1 Post " the thanked is wrong,when i view the users profile it is showing correctly "Total Thanks: 545
Thanked 1,156 Times in 700 Posts" I have ran the update counters in admin panel,but this hasnt fixed it,the strange thing is every other members count is showing correctly in postbit but hers,any suggestions please as to what could be the problem

[Abe1]

hey all ive got a weird problem,I have a member who's count up is not showing in postbit properly it is stuck on "Thanked 1 Time in 1 Post " the thanked is wrong,when i view the users profile it is showing correctly "Total Thanks: 545
Thanked 1,156 Times in 700 Posts" I have ran the update counters in admin panel,but this hasnt fixed it,the strange thing is every other members count is showing correctly in postbit but hers,any suggestions please as to what could be the problem
make sure the template edits are correct.

[Rickie3]

make sure the template edits are correct.thanks bro got it sorted,dont know what happened but i had misplaced part of the code in postbit,thanx for your help happy now its sorted

[dbirosel]

Is it possible to see who gave me thanks? There is a counter in our postbit/legacy showing how many people gave us Thanks. Can that be linked to show us all the thanks we received?

[sn8k]

i am running 3.5.4, whenever i upload this file, it times out...doesnt even go to the importing product page, just shows a status bar of trying to load, then it times out...any ideas on how to fix it, i love this hack on the -ACI- www.anticheatinc.com website, and want to integrate it into mine...

[Abe1]

i am running 3.5.4, whenever i upload this file, it times out...doesnt even go to the importing product page, just shows a status bar of trying to load, then it times out...any ideas on how to fix it, i love this hack on the -ACI- www.anticheatinc.com website, and want to integrate it into mine...
The the FTP option to upload it.

[dbirosel]

I'm assuming that you can't view a list that shows the threads that you got thank for?

[Abe1]

I'm assuming that you can't view a list that shows the threads that you got thank for?
You can. Go you your profile page and there is a link there.

[MixMakers]

For some reason I cannot get this hack to work. It just times out when I try to add a product through the admin cpanel or when I upload it through FTP.

[ableemperor]

saol kardeş thanks :)

[princeedward]

...since i can't make the [AJAX] Post Thank You Hack work on my vB3.6.7 PL1 i try again to work this one...but got any problem about the module or the size of the thanks box...and i dont know how to fix this...or anyone please help me on this...please view my attachment below...

[mutawa]

An old version of the Thanks hack was installed, I upgraded to the Gold version and got this error message:

Database error in vBulletin 3.5.4:

Invalid SQL:

### INSERT QUERY GENERATED BY fetch_query_sql() ###
INSERT INTO plugin
(`active`, `executionorder`, `title`, `hookname`, `phpcode`, `product`)
VALUES
('1', '5', 'Post Thank You Hank', 'cache_templates', 'if (THIS_SCRIPT === showthread || THIS_SCRIPT === showpost)\r\n{\r\n $globaltemplates = array_merge($globaltemplates, array(\r\n \'post_thanks_box\',\r\n \'post_thanks_box_bit\',\r\n \'post_thanks_button\',\r\n \'post_thanks_postbit\',\r\n \'post_thanks_postbit_legacy\'\r\n ));\r\n}', 'post_thanks');

MySQL Error : Unknown column 'executionorder' in 'field list'

Please help.

one more thing, in the installation instructions, I did not find the following string in SHOWTHREAD

(not found)
--------------------------------------------------------------------
<script type="text/javascript" src="clientscript/vbulletin_post_loader.js?v=$vboptions[simpleversion]"></script>
-----------------------------------------------------------------
is there any other sign I can look for?

[Abe1]

An old version of the Thanks hack was installed, I upgraded to the Gold version and got this error message:


Database error in vBulletin 3.5.4:

Invalid SQL:

### INSERT QUERY GENERATED BY fetch_query_sql() ###
INSERT INTO plugin
(`active`, `executionorder`, `title`, `hookname`, `phpcode`, `product`)
VALUES
('1', '5', 'Post Thank You Hank', 'cache_templates', 'if (THIS_SCRIPT === showthread || THIS_SCRIPT === showpost)\r\n{\r\n $globaltemplates = array_merge($globaltemplates, array(\r\n \'post_thanks_box\',\r\n \'post_thanks_box_bit\',\r\n \'post_thanks_button\',\r\n \'post_thanks_postbit\',\r\n \'post_thanks_postbit_legacy\'\r\n ));\r\n}', 'post_thanks');

MySQL Error : Unknown column 'executionorder' in 'field list'


Please help.


one more thing, in the installation instructions, I did not find the following string in SHOWTHREAD

(not found)
--------------------------------------------------------------------
<script type="text/javascript" src="clientscript/vbulletin_post_loader.js?v=$vboptions[simpleversion]"></script>
-----------------------------------------------------------------
is there any other sign I can look for?
There is a reason why version 6.0 was no posted for version 3.5.x and only for 3.6.x.

[mutawa]

There is a reason why version 6.0 was no posted for version 3.5.x and only for 3.6.x.

I installed 4.5 and it is working great, thank you.

I voted (Excellent at the top), is this instant voting feature comes with the new vb or is it a hack?

[doc_sameer]

I wanted to know the modifications needed to show up the thanks within the post itself rather than outside in a box

something like this:

https://vborg.vbsupport.ru/

Thanks.

btw, the mod is fantastic.

[natio]

Thanks for the great mod, however I get the following error when trying to find all the thanks posted by a user:

Warning: mysql_real_escape_string() expects parameter 1 to be string, array given in /includes/class_core.php on line 665


Anyone else get this?

I am using: VB 3.6.8

[SAReefer]

Hi being fairly new to all of this editing a template scares me

in postbit AND postbit_lagacy:

find:
--------------------------------------------------------------------
$vbphrase[posts]: $post[posts]
--------------------------------------------------------------------

AFTER place this:

emphasis on the "AFTER place this" do i press enter and place it in a new line or do i add it directly after the las character?

any link or reading on editing templates would be much appreciated

[Ncturnal]

It doesn't matter. The system doesn't read the spaces or carriage returns in the code.

This:

$vbphrase[posts]: $post[posts]

is the same as this:

$vbphrase[posts]: $post[posts]

and this:

$vbphrase[posts]:




$post[posts]

I usually do 3 carriage returns and enter the code which a open line above and below so the code is easy to spot if I ever need to modify it. Hope that helps.

[SAReefer]

yes it does thanks, and is there any way i can save the original incase i do, do something wrong?

[Citizen]

Is there a way to display the top 10 most thanked users?

[gnagplank6]

Does this hack exist for vB4?

Thanks!

Added:

Here's a link for other idiots like myself:

https://vborg.vbsupport.ru/showthread.php?t=231666

[Mumin]

I'm using VB 4.2 and cannot find any of the lines of code in the template files, such as:

$vbphrase[posts]: $post[posts]

<!-- controls -->

<!-- / post #$post[postid] -->

Actually, I cannot find any of the codes in the Instructions.txt file. Is this hack not compatible with VB 4.2?