uCash & uShop old support and thank you thread

[NuclioN]

We use 20 styles, is this install (no HTL) updating all styles?

[erikajune]

When I tried notepad, the file looked like a mess. No line breaks whatsoever which was why I went to a different program. I am kind of curious how that happens. I bet thats why people are having issues with the HTL though.

It worked with the Syn Text Editor. Thanks a bunch. :)

[milkmycow]

We use 20 styles, is this install (no HTL) updating all styles?
it added them to my 3 styles.

[vhoang]

Anyone getting the problem of no points per view? I set it to .01 but dont see any increase.

[erikajune]

I'm still getting the no action problem as well as no point increase. I did what was said in the edited first post - it got rid of an error but did not help with the no-action and I added "1" to a forum (x3) - still nothing.

vB3, standalone

[filth]

I'm going to take out the HTL install as it seems to have more problems than its worth and the standalone installer is working just fine now.

The standalone installer does have a problem. The reason people have links pointing to the wrong place is because in the templates in creates it references uttstore.php instead of ushop.php.

I downloaded the file about half an hour ago so am pretty sure it is the latest version.

[PranK]

ripper rita!

/me clicks install

Thanks guys!

[filth]

seems to be a small error when there are characters that get url encoded

for example the following shows in 1 of my settings pages:-

Don't forget to take forum options into consideration

of course Don't should be don't, there seem to be many errors like this

p.s. this was using the php installer and not the htl

[Floris]

After a 2 week delay!

Presenting uCash & uShop

uCash: Feature List







Fully configurable database table/field for integrating with other systems that uses points.
Master On/Off Switch
Global Points Per Thread Setting
Global Points Per Reply Setting
Global Points Per Thread View Setting
Points Per Good Reputation
Points Per Bad Reputation
Points Per Referral
Points Per Shout Setting (if Squall's Shoutbox Hack 1.02 or above is installed.)
Round to x Decimal Places (for a cash/change system)
Modify Points in the User Manager
Per-Forum Points Per Thread Setting (multiplied by the global setting to get the final value)
Per-Forum Points Per Reply Setting (multiplied by the global setting to get the final value)
Per-Forum Points Per Thread View Setting (multiplied by the global setting to get the final value)
uShop: Feature List

Currently 18 actions are available - Donate, Change Custom Title, Change Other User's Custom Title, Change Username, Glowing Username, Colored Username, Bold Username, Italicized Username, Admin Donate, Bank, Secondary Usergroup, Sticky Thread, Thief!, Buy Forum Password, Buy Forum Access, Deny Forum Access, Give Forum Access, Arcade Pass (If Arcade Pass Hack v3 is installed.)
Quantity System
Quantity Refill (Set a number of seconds between refills and quantity is automatically refilled when accessing the main store script.)
Richest x Users
Top x Most Sold Actions
Purchase History
Senoir Discount (based on age - if they are older than x years, they get a discount (also setable))
Loyal Member Discount (based on days registered - if they have been registered for x days, they get a discount (also setable))
Usergroup Discount (give your staff a price cut!)
Shortname (only setable while in debug mode - can be used in links (also used in some functions))
Setable Action Description
Setable Display Order
Setable Cost
Setable Quantity and Quantity Refill (when/if quantities are refilled)
Setable Allowed Usergroups Via Checkboxes (usergroups that are not allowed do not see the action at all and cannot access it)
Setable Denied Usergroups Via Checkboxes (users that are a member of this usergroup cannot use the action)
Setable Image Location (if not location is specified, no image is shown)
Show In Store (if it is set to no, you will not see the action in the store, but can still access it via direct link)
Setable Active Status (if it isn't active, it goes *poof* from the store and is not accessable until it is set active again)
Update Display Order, Cost, Tax, Sold, Quantity Refill, and Quantity en masse.
You can duplicate the "Secondary Usergroup" action and define which usergroups are joinable for each action by duplicating the action file and setting the joinable groups at the top (so you can allow different usergroups to be joined for different prices)
Secondary Usergroup is an extremely powerful action - you can give people access to forums, higher PM quotas, the ability to see invisible users, access to free custom title changing, etc.
Action Specific Variables System - specific variblables set per action. You can add and edit these variables in debug mode - or you can just change the value while editing an action as if it were any other variable.
Copy an action (useful for actions like secondary usergroup and those dealing with forums if you want each forum/usergroup to have a different cost/quantity/etc)
Very few queries! (On the main page, there are 6 queries - 5 from vB3 and 1 from the store - and that's just for the richest users!)
I think thats the features :)


uCash & uShop credits

Conecept:
Zachery Woods
Matthew Gordon
PHP Code:
Matthew Gordon
- misc: Zachery Woods, Stefan "Xenon", g-force2k2
Templates:
Zachery Woods
- misc: Matthew Gordon
Other contributions:
Assassingod
Kura
Oblivion Knight
Hobbes
Stefan "Xenon"
g-force2k2


If you feel your not able to install this your self please feel free to drop me a pm and we can make arrangments

If you would like to donate to us please pm us and again we can make arragnments :)

the beta is only the name of the release, we have tested the hack rather well,

There is a HTL version and a self installing php version.


Dont forget to click install! :D



Quick instructions,



upload all files


HTL users should know what to do


For anyone NOT using the HTL,
dont upload the HTLFiles folder
run admincp/ushop_install.php
then follow file_template.html :)

EDIT: The HTL install has now been burried deeper into the zip, and it is recommended that you do not install this hack using it. It is just as easy to use the standalone installer, so use it!

Make the shop appear in the WOL https://vborg.vbsupport.ru/showpost.php?p=499545&postcount=131



EDIT 04/12/04 6:28 EDT: If you downloaded it before now, redownload it. For those who have installed it before now, replace all instances of uttstore.php with ushop.php in the postbit and postbit_legacy templates.




EDIT (Matthew): FOR THOSE WHO WANT SUPPORT, SPECIFY THIS INFORMATION OR BE IGNORED:

Did you run the standalone or HTL installer?
What is the exact error you recieve?
Where does the supposed error happen?
What vB version are you running?


EDIT 04/12/04 8:50 EDT: I updated the zip to remove an unneeded postbit edit. It is highly recommended that everyone who installed it or downloaded it before now needs to do this edit.


Edit template postbit: Find: <a style="font-size:14pt" href="member.php?$session[sessionurl]u=$post[userid]"><if condition="$post['uttstore_usernamecolor'] != '0'"><font color="$post[uttstore_usernamecolor]"></if><if condition="$post['uttstore_boldusername'] != '0'"><b></if><if condition="$post['uttstore_italicsusername'] != '0'"><i></if>$post[musername]<if condition="$post['uttstore_italicsusername'] != '0'"></i></if><if condition="$post['uttstore_boldusername'] != '0'"></b></if><if condition="$post['uttstore_usernamecolor'] != '0'"></font></if></a>

Replace With: <a style="font-size:14pt" href="member.php?$session[sessionurl]u=$post[userid]">$post[musername]</a>

If you are using vB3 RC4 or above, replace style="font-size:14pt" with class="bigusername" in those edits.


IF YOU ARE HAVING FOREACH ERRORS IN GLOBAL.PHP OR NO ACTION ERRORS:
First, remove the second global.php edit. Then run ushop.php?rebuildds=1. Then put the edit back in adns ee if that works. If it doesn't work, answer the questions above, if it does, post saying that and let me know in the post if you used the HTL or standalone installer. This will help me diagnose the problem as to whether it is a user error or an error on one of the installers. Thank you.


IF YOU ARE NOT GETTING ANY POINTS:
Edit a forum and set all of the store settings to '1' and save.

EDIT 04/12/04 11:42 PM: Fixed a few table prefix issues.
This is a great a$s release.

Worth HACK OF THE MONTH for me; I now nominate & vote for for it: *counts votes*: Yep, you won.

[sabret00the]

only 31 installs :(

[BarHopper]

only 31 installs :(

It's not been out that long ;).

Wow, i wake up and 18 pages!! :surprised:

[BarHopper]

ok. I found a few errors, i enabled images, but they're not showing. Also, everything except donate and theif is out of stock.

Also, in the post bit i made a mistake, but i dont know what to delete. In the postbit its now got Post: x | Post: x . I'm using Postbit_Legacy

[djohn]

Planning to install this, I only have 3 questions beforehand.

1. Why is it version 0.93, not 1.0?
2. Will the updates to the next versions be easy?
3. Is it possible to add more actions later on?

PS: Are the Who is Online locations added to thee latest release?

Thanks.

[Zelda-King]

First of all: Reply to feedback request regarding my first problem with the wrong link in postbits;

I had to change the postbit/postbit_legacy references to uttstore.php to ushop.php. I had tried redownloading the hack again so I was using the latest version as of about 8 hours before this post. Sorry I took so long to answer but I was fixing a lot of issues. Thanks for your help! :)

Did you run the standalone or HTL installer?

HTL Installer

What is the exact error you recieve?

- I have no input place to determine how much to pay ANYWHERE. I did have but it has mysteriously gone.
- The bank has the 'cannot enter non-positive amount' problem already posted about.
- I failed to find a second file edit for global.php to fix the posted global problem. However my forum seemed to fix itself...

- I don't get the images for actions either.
- It seems some of my users get "No actions found" on everything in the store but others do not. I have checked the usergroup settings. :/
- My bank problem is also in the 'thief' section. I had the following bug reported;

It was the only available thing at the shop, so I figured I would try it. I put in the name of the person I tried to steal from, and hit Continue. It then says I cannot steal a non-positive amount (although I was never prompted to enter a value to begin with).
- I'm now getting this MySQL error when I try to admin-donate to myself;

Database error in vBulletin 3.0.0:

Invalid SQL: UPDATE user SET uttpoints=uttpoints+ WHERE userid='1'
mysql error: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'WHERE userid='1'' at line 1

mysql error number: 1064

I was able to admin-donate to myself before but now I can't... and I have not touched my database.

Where does the supposed error happen?

The said store locations. However, I know at least my administrators have been able to buy things. They can't use the bank though.

What vB version are you running?

3.0.0 (Gold)

[SmasherMaster]

This is extremly frustrating....but I think I know what is wrong. I wasn't supposed to install the htl version and then do the file edits from the HTML page included was i? :(

[Reeve of shinra]

SmasherMaster - yes, thats how HTL works I beleive.

[lasto]

Personaly myself id remove the htl version as there deffo is some confusion and make everyone do it the proper way.That way it will be easier to keep track of errors etc.Then when everyone has suzzed it then just release a HTL version with the bugs fixed.
As for me,the store works fine - members get points and can buy stuff if they have enough points and the hack aitn exactly one of the hardest to install either.Also people say they got problems with the bank - ive been testing like mad on this and never got any sort of errors donating from one member to another.

[*arie]

great hack...

Everything is working fine for us. :D

[Link14716]

Ok, yes, there still are a few references to uttstore.php in the templates apparently. I'm going to leave the no images showing up questions for Zachery, since he did the templates and probably didn't put it back in.

[Link14716]

The standalone installer does have a problem. The reason people have links pointing to the wrong place is because in the templates in creates it references uttstore.php instead of ushop.php.

I downloaded the file about half an hour ago so am pretty sure it is the latest version.
Fixed.

[Link14716]

Did you run the standalone or HTL installer? standalone
What is the exact error you recieve? links to uttstore on shop home
Where does the supposed error happen? i noticed it in most sold and purchase history links
What vB version are you running? vb3 gold

also i already did a find/replace in templates from uttstore to ushop, and still getting problems

i also am not getting images on my shop page. i have them enabled, and linked correctly, but no images are showing for the items
You aren't supposed to do a find/replace on uttstore to ushop, that will screw almost everything up. You are supposed to do a find/replace on uttstore.php to ushop.php.

[Link14716]

Did you run the standalone or HTL installer? Standalone
What is the exact error you recieve?
Warning: Invalid argument supplied for foreach() in /home/gamesxpo/public_html/ushop.php on line 144

Also no actions found
Where does the supposed error happen?
ushop.php
What vB version are you running? vB 3.0.0

I've read the whole thread, and so far cannot figure it out, i've tried everything.
Run ushop.php?rebuildds=1. If that doesn't work, run this query and tell me how many rows it finds.
SELECT * FROM utt_store_action;
If it returns 18 rows, run this query and tell me what is in the data column:
SELECT * FROM datastore WHERE title='utt_store_act';

[Link14716]

Anyone getting the problem of no points per view? I set it to .01 but dont see any increase.
Did you do the showthread.php file edit?

...is that edit even in the HTML file? Zachery!?!

[Link14716]

I'm still getting the no action problem as well as no point increase. I did what was said in the edited first post - it got rid of an error but did not help with the no-action and I added "1" to a forum (x3) - still nothing.

vB3, standalone
You have to put the edit back in. It looks like you missed some edits if you still don't get points, though.

[Link14716]

seems to be a small error when there are characters that get url encoded

for example the following shows in 1 of my settings pages:-

Don&apos;t forget to take forum options into consideration

of course Don&apos;t should be don't, there seem to be many errors like this

p.s. this was using the php installer and not the htl
vB must be changing the & to &amp; which breaks the characters. Well whoops.

[Link14716]

ok. I found a few errors, i enabled images, but they're not showing. Also, everything except donate and theif is out of stock.

Also, in the post bit i made a mistake, but i dont know what to delete. In the postbit its now got Post: x | Post: x . I'm using Postbit_Legacy
The first two are both mistakes made by Zachery in the templates. ;) It says Out Of Stock when you don't have enough money as well as when it is actually out of stock. (bug). And it appears he forgot to add the images back in for some reason.

For the bad postbit edit - you messed up the last postbit edit by adding the code after instead of relplacing it.

[Link14716]

Planning to install this, I only have 3 questions beforehand.

1. Why is it version 0.93, not 1.0?
2. Will the updates to the next versions be easy?
3. Is it possible to add more actions later on?

PS: Are the Who is Online locations added to thee latest release?


Thanks.
1. Because I'd like a bit more testing and some more features added before I call it 1.00. Of course, I'm also going to clean up the code used in the action files as well - didn't have time to do that and test it before the release.

2. Yes

3. Yes

4. No

[Link14716]

First of all: Reply to feedback request regarding my first problem with the wrong link in postbits;

I had to change the postbit/postbit_legacy references to uttstore.php to ushop.php. I had tried redownloading the hack again so I was using the latest version as of about 8 hours before this post. Sorry I took so long to answer but I was fixing a lot of issues. Thanks for your help! :)

Did you run the standalone or HTL installer?

HTL Installer

What is the exact error you recieve?

- I have no input place to determine how much to pay ANYWHERE. I did have but it has mysteriously gone.
- The bank has the 'cannot enter non-positive amount' problem already posted about.
- I failed to find a second file edit for global.php to fix the posted global problem. However my forum seemed to fix itself...

- I don't get the images for actions either.
- It seems some of my users get "No actions found" on everything in the store but others do not. I have checked the usergroup settings. :/
- My bank problem is also in the 'thief' section. I had the following bug reported;

It was the only available thing at the shop, so I figured I would try it. I put in the name of the person I tried to steal from, and hit Continue. It then says I cannot steal a non-positive amount (although I was never prompted to enter a value to begin with).
- I'm now getting this MySQL error when I try to admin-donate to myself;

Database error in vBulletin 3.0.0:

Invalid SQL: UPDATE user SET uttpoints=uttpoints+ WHERE userid='1'
mysql error: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'WHERE userid='1'' at line 1

mysql error number: 1064

I was able to admin-donate to myself before but now I can't... and I have not touched my database.

Where does the supposed error happen?

The said store locations. However, I know at least my administrators have been able to buy things. They can't use the bank though.

What vB version are you running?

3.0.0 (Gold)
Re-download the zip and upload the files, run the uninstaller in the standalone, and then run the installer. Tell me if the problems are still there - though I don't see why they would be.

That applies to all the problems in your post - except the images - that is a known bug.

[Link14716]

This is extremly frustrating....but I think I know what is wrong. I wasn't supposed to install the htl version and then do the file edits from the HTML page included was i? :(
It shouldn't matter. Either way, uninstall with the standalone and then re-install with the standalone.

[Link14716]

Personaly myself id remove the htl version as there deffo is some confusion and make everyone do it the proper way.That way it will be easier to keep track of errors etc.Then when everyone has suzzed it then just release a HTL version with the bugs fixed.
As for me,the store works fine - members get points and can buy stuff if they have enough points and the hack aitn exactly one of the hardest to install either.Also people say they got problems with the bank - ive been testing like mad on this and never got any sort of errors donating from one member to another.
I already burried it in the zip and put a big readme file right in there - anyone asking for support with an HTL installation will be asked to uninstall and re-install via the standalone.

[Link14716]

great hack...

Everything is working fine for us. :D
Finally, someone not having any problems. ;) Hope you enjoy it. :)

[olddh]

Ok it says to edit this file...
functions_showthread.php

//do posts from ignored users

-I cannot find it, I used the search feature for Wordpad and it could not find it.
Could someone please tell me where it should be so I can post the necessary code.

[Zelda-King]

Re-download the zip and upload the files, run the uninstaller in the standalone, and then run the installer. Tell me if the problems are still there - though I don't see why they would be.

That applies to all the problems in your post - except the images - that is a known bug.OK, just cleaned my cache and redownloaded. The installer had an error trying to refer to functions_uttstore.php (which I fixed by renaming it to functions_ushop.php).

However, now if I go to my bank (that's what I tested) I get this error;

Warning: main(./includes/functions_uttstore.php): failed to open stream: No such file or directory in /home/gamercr/public_html/bb/ushop.php on line 86

Fatal error: main(): Failed opening required './includes/functions_uttstore.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/gamercr/public_html/bb/ushop.php on line 86

I'll go edit the file for myself and keep you posted. :)

[Link14716]

The file is functions_uttstore.php.

[Link14716]

Ok it says to edit this file...
functions_showthread.php

//do posts from ignored users

-I cannot find it, I used the search feature for Wordpad and it could not find it.
Could someone please tell me where it should be so I can post the necessary code.
What vB version is this?

[olddh]

3.0

[olddh]

I am also having troubles finding this...

<a style="font-size:14pt" href="member.php?$session[sessionurl]u=$post[userid]">$post[musername]</a>

It says its in the postbit template.

[Zelda-King]

OK, so far everything seems functional now. Thankyou. :)

[mantra]

Can I add my own items to the store like DVDs and etc.
I tried that and when I went to buy the item, I got this error message:

Warning: main(uttstore/action.): failed to open stream: No such file or directory in /home/desispac/public_html/forums/ushop.php on line 247

Fatal error: main(): Failed opening required 'uttstore/action.' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/desispac/public_html/forums/ushop.php on line 247

[Link14716]

I am also having troubles finding this...

<a style="font-size:14pt" href="member.php?$session[sessionurl]u=$post[userid]">$post[musername]</a>

It says its in the postbit template.
Are you using an old version of the zip? Redownload it because that edit was removed a while ago as it is not needed. As far as the functions_showthread.php not having that code, the code should be

// do posts from ignored users

Notice the space between // and do.

[Zelda-King]

I got this error message:

Warning: main(uttstore/action.): failed to open stream: No such file or directory in /home/desispac/public_html/forums/ushop.php on line 247

Fatal error: main(): Failed opening required 'uttstore/action.' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/desispac/public_html/forums/ushop.php on line 247I posted this. I changed functions_uttstore.php to functions_ushop.php then changed line 86 of ushop.php to point to functions_ushop.php.

Not sure that's what the coders want us to do but it'll work until they tell you different. :)

[Link14716]

Can I add my own items to the store like DVDs and etc.
I tried that and when I went to buy the item, I got this error message:

Warning: main(uttstore/action.): failed to open stream: No such file or directory in /home/desispac/public_html/forums/ushop.php on line 247

Fatal error: main(): Failed opening required 'uttstore/action.' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/desispac/public_html/forums/ushop.php on line 247
No you cannot.

[Link14716]

I posted this. I changed functions_uttstore.php to functions_ushop.php then changed line 86 of ushop.php to point to functions_ushop.php.

Not sure that's what the coders want us to do but it'll work until they tell you different. :)
You shouldn't do that. The file is functions_uttstore.php and is referred to as such everywhere. I noticed that the installer had referred to functions_ushop.php and have fixed it since.

[Flow Fusion]

Fatal error: Call to undefined function: ÊÊÊÊÊÊÊÊconstruct_nav_option() in /home/giftedso/public_html/gs/admincp/index.php on line 514

help?

[mantra]

ok, so if I shouldn't do this - " I changed functions_uttstore.php to functions_ushop.php then changed line 86 of ushop.php to point to functions_ushop.php" then what should I do ?

so I cannot add other items to the store ?

[Link14716]

Fatal error: Call to undefined function: ????????construct_nav_option() in /home/giftedso/public_html/gs/admincp/index.php on line 514

help?
...someting went horribly wrong with your file edits.

[Link14716]

ok, so if I shouldn't do this - " I changed functions_uttstore.php to functions_ushop.php then changed line 86 of ushop.php to point to functions_ushop.php" then what should I do ?

so I cannot add other items to the store ?
This is not an itemshop, nor is this a vbTrader-like hack.

[BarHopper]

The first two are both mistakes made by Zachery in the templates. ;) It says Out Of Stock when you don't have enough money as well as when it is actually out of stock. (bug). And it appears he forgot to add the images back in for some reason.

So, how do i correct it? Or dont i?

Also, could you tell me the exact code i need to delete please.. Thankyou. (To prevent anymore bugs/problems)

[Link14716]

So, how do i correct it? Or dont i?

Also, could you tell me the exact code i need to delete please.. Thankyou. (To prevent anymore bugs/problems)
...just look at the HTML file and delete the code that it tells you to find in the last edit for postbit.

[AutomatikStudio]

/me thinks that this maybe should have been released in the Beta Hack's forum.

I know I personally have found numerous mistyped code, misspelled words, and other small mistakes.

[olddh]

Ok I remember seeing a fix code somewhere but I can't seem to find it. I got the store working the only thing is that it isn't counting posts.

[SmasherMaster]

It shouldn't matter. Either way, uninstall with the standalone and then re-install with the standalone.
Huh? I'm confused.

[BarHopper]

Still link, what do i do about the Out of stock? Wait for the templates to be changed? Or what?

[Link14716]

Ok I remember seeing a fix code somewhere but I can't seem to find it. I got the store working the only thing is that it isn't counting posts.
Make sure you edited the files correctly.

[mantra]

any hacks that will let me sell my own items to the users of my forum (i.e. dvds, cds, etc)

thanks

[Link14716]

Huh? I'm confused.
I shouldn't matter if you used the HTL or the HTML file. Either way, I'm asking you to (re-)upload the installer, run the uninstaller, and then run the install again using the standalone - not the HTL.

[Link14716]

Still link, what do i do about the Out of stock? Wait for the templates to be changed? Or what?
Wait for the templates to be updated, or apply this fix: https://vborg.vbsupport.ru/showpost.php?p=499716&postcount=234

[Link14716]

any hacks that will let me sell my own items to the users of my forum (i.e. dvds, cds, etc)

thanks
vbTrader by trafix. Ask about it at http://www.everythingvb.com/.

[olddh]

Make sure you edited the files correctly.
The only one that I could not figure out how to edit was includes_showthread.php

^that is probably why its not working but the line that is suppost to be editd is not there

[Link14716]

Make sure you edited the files correctly.
The only one that I could not figure out how to edit was includes_showthread.php

^that is probably why its not working but the line that is suppost to be editd is not there
What is the problem? Post counts are not updating? That would be an improper includes/functions_newpost.php edit.

[olddh]

Well the problem is that people are not getting points when they post

[Link14716]

Then the information in the first post comes into play here, and if that doesn't help, it is still an improper includes/functions_newpost.php edit.

[olddh]

When I try to update points, I get this...
Database error in vBulletin 3.0.0:

Invalid SQL: UPDATE forum SET

### UPDATE QUERY GENERATED BY fetch_query_sql() ###
title = 'General Chat',
description = '',
link = '',
displayorder = '1',
daysprune = '30',
parentid = '-1',
mimicbotrop = '',
newpostemail = '',
newthreademail = '',
styleid = '0',
password = '',
uttpoints_perthread = '1',
uttpoints_perreply = '1',
uttpoints_perview = '0',
options = '89795',
parentlist = '6,-1'
WHERE forumid=6
mysql error: Unknown column 'mimicbotrop' in 'field list'

mysql error number: 1054

Date: Tuesday 13th of April 2004 10:13:53 AM
Script: http://www.spunky.uni.cc/forum/admincp/forum.php
Referer: http://www.spunky.uni.cc/forum/admincp/forum.php?do=edit&forumid=6&s=

What code did I mess up?

[SmasherMaster]

I shouldn't matter if you used the HTL or the HTML file. Either way, I'm asking you to (re-)upload the installer, run the uninstaller, and then run the install again using the standalone - not the HTL.
Ok it's working....but I still get the no actions found...:(

EDIT: And shouldn't there be some "points" field in the user editor in the admincp? Also, where's the fields in the forum options allowing points? And if somehow I do get this thign working how do I update the points to the ppl who already have a ton of posts?

[milkmycow]

ok to try to fix the link errors, i decided to uninstall, and reinstall the newest zip.. damn was that a mistake..

during uninstall procress once it starts the sql uninstall i got this error

Database error in vBulletin 3.0.0:

Invalid SQL: ALTER TABLE forum DROP `uttpoints_perthread` , DROP `uttpoints_perreply` , DROP `uttpoints_perview`
mysql error: Can't DROP 'uttpoints_perthread'. Check that column/key exists

mysql error number: 1091

when i go back to the upgrade option, it loads blank page, when i goto install it says i already have the latest version

vb3 gold, standalone

[Link14716]

When I try to update points, I get this...
Database error in vBulletin 3.0.0:

Invalid SQL: UPDATE forum SET

### UPDATE QUERY GENERATED BY fetch_query_sql() ###
title = 'General Chat',
description = '',
link = '',
displayorder = '1',
daysprune = '30',
parentid = '-1',
mimicbotrop = '',
newpostemail = '',
newthreademail = '',
styleid = '0',
password = '',
uttpoints_perthread = '1',
uttpoints_perreply = '1',
uttpoints_perview = '0',
options = '89795',
parentlist = '6,-1'
WHERE forumid=6
mysql error: Unknown column 'mimicbotrop' in 'field list'

mysql error number: 1054

Date: Tuesday 13th of April 2004 10:13:53 AM
Script: http://www.spunky.uni.cc/forum/admincp/forum.php
Referer: http://www.spunky.uni.cc/forum/admincp/forum.php?do=edit&forumid=6&s=

What code did I mess up?
The error has nothing to do with this hack. It has to do with another hack that edited forum.php.

[milkmycow]

uh how so? it happened in the uninstall script?

but ok..

how can i manually uninstall then? so that when i goto install it wont say i have newest version

[Link14716]

Ok it's working....but I still get the no actions found...:(

EDIT: And shouldn't there be some "points" field in the user editor in the admincp? Also, where's the fields in the forum options allowing points? And if somehow I do get this thign working how do I update the points to the ppl who already have a ton of posts?
Search this thread. I answered most of those questions throughout this thread.

[Link14716]

uh how so? it happened in the uninstall script?

but ok..

how can i manually uninstall then? so that when i goto install it wont say i have newest version
I wasn't replying to you.

[Link14716]

ok to try to fix the link errors, i decided to uninstall, and reinstall the newest zip.. damn was that a mistake..

during uninstall procress once it starts the sql uninstall i got this error

Database error in vBulletin 3.0.0:

Invalid SQL: ALTER TABLE forum DROP `uttpoints_perthread` , DROP `uttpoints_perreply` , DROP `uttpoints_perview`
mysql error: Can't DROP 'uttpoints_perthread'. Check that column/key exists

mysql error number: 1091


when i go back to the upgrade option, it loads blank page, when i goto install it says i already have the latest version


vb3 gold, standalone
Go to ushop_install.php?do=install&step=dosettings and start from there.

[BarHopper]

In this bit on the store homepage:

Game-realms's Store
Welcome to Game-realms's Store, More welcome text to go here!
Quick Nav - [Purchase History]
Donate - Change Custom Title - Change Other User's Custom Title - Change Username - Glowing Username - Colored Username - Bold Username - Italicized Username - Secondary Usergroup - Sticky Thread - Thief! - Buy Forum Password - Buy Forum Access - Deny Forum Access - Give Forum Access

Where can i change the link to ustore?

[Link14716]

Do a find/replace throughout all of the templates searching for uttstore.php and replacing with ushop.php.

[NuclioN]

You have a busy day Link4716 :)

[Link14716]

Considering I have over 115 posts in this thread and it hasn't even been a full day since it was released... yeah, a little busy.

[Preech]

Peace to the God.
I've been waiting on this.

[BarHopper]

Fully functional i think now, Thanks guys.

[Zachery]

As i updated the first post

We are working to get a support forum up for UCS, anyone who would like to make a donation we urge you to PM us, the sooner we can get our support forum up the faster we can get support to you.

[SmasherMaster]

Got another error...and Link I STILL don't know how to fix the no actions found...apperantly the HTL version is absolutly ****ed up.

Did you run the standalone or HTL installer? - HTL

What is the exact error you recieve? - Warning: Invalid argument supplied for foreach() in /home/smasher1/public_html/forums/ushop.php on line 144

Where does the supposed error happen? - The main shop menu
What vB version are you running? - Vbulletin 3.0.0 Gold

[Giveit2u43]

Had to help another person out with this.. they`d run the HTL.. I used the uninstaller in the Standalone installer and then installed via that, and again they`d made the Global Edit at the top of the File not the bottom.. So be sure to check that.

[BarHopper]

Got another error...and Link I STILL don't know how to fix the no actions found...apperantly the HTL version is absolutly ****ed up.

Did you run the standalone or HTL installer? - HTL

What is the exact error you recieve? - Warning: Invalid argument supplied for foreach() in /home/smasher1/public_html/forums/ushop.php on line 144

Where does the supposed error happen? - The main shop menu
What vB version are you running? - Vbulletin 3.0.0 Gold

I think your best bet is to go on the standalone installtion, cluck uninstall and ddo a fresh install using the standalone.

[Link14716]

I think your best bet is to go on the standalone installtion, cluck uninstall and ddo a fresh install using the standalone.
I'd recommend that as well. Be sure to redownload first, though, since there have been some fixes to the installer.

[erikajune]

When I click on an item in ushop, it takes me to this page: http://www.incredifind.com/index.cfm?action=lookup&pc=wmrif&Keywords=http://www.onlineparents.net/community/uttstore.php?do=a&aid=10

Any idea why it would be doing this?

And the prices aren't showing up properly. It's displaying all the costs of items as 9 times the amount I specified in the acp. Weird....

[filth]

I just did an uninstal and tried to reinstal and got the following error:-

Checking for previous installations...

It appears you already have the latest version installed!

im using the standalone installer for this

[Link14716]

When I click on an item in ushop, it takes me to this page: http://www.incredifind.com/index.cfm?action=lookup&pc=wmrif&Keywords=http://www.onlineparents.net/community/uttstore.php?do=a&aid=10

Any idea why it would be doing this?

And the prices aren't showing up properly. It's displaying all the costs of items as 9 times the amount I specified in the acp. Weird....
The first one looks like an error on your end. Do you have a bad replacement variable somewhere or something?

As for the costs - the first thing I'd check are the discounts. There are three discount types - two are settings and one is a usergroup setting. Make sure that none are negative or something. Both of your problems are odd ones that I personally haven't encountered before.

Also, try re-installing the templates via the standalone installer.

[Link14716]

I just did an uninstal and tried to reinstal and got the following error:-


Checking for previous installations...

It appears you already have the latest version installed!
Go to ushop_install.php?do=install&step=dosettings

[filth]

Go to ushop_install.php?do=install&step=dosettings


cheers that sorted it

[NuclioN]

How does it add points when members are posting in the shoutbox???

[Link14716]

How does it add points when members are posting in the shoutbox???
It's a setting in 'vBulletin Options' under 'uTT Points System Settings'. I made the shoutbox check for that setting so the code is already there.

[erikajune]

I only get that weird link when I click anything in the Quick Nav or when I try to change username color for example.

I also get this error occasionally -

Warning: Invalid argument supplied for foreach() in /home/erika/public_html/community/ushop.php on line 144

But I can refresh and it goes away, so...

[NuclioN]

Hm..i've set the points to 1 per shout but it did not update the points.

[Xenon]

23 Pages already???

outch

[Link14716]

23 Pages already???

outch
Yes, ouch indeed.

[NuclioN]

In the navbarlink: Most Sold Actions all links are dead.

[Link14716]

I only get that weird link when I click anything in the Quick Nav or when I try to change username color for example.

I also get this error occasionally -

Warning: Invalid argument supplied for foreach() in /home/erika/public_html/community/ushop.php on line 144

But I can refresh and it goes away, so...
Can you answer the questions outlined in the first post so I can see if I can get to the bottom of this?

[Link14716]

In the navbarlink: Most Sold Actions all links are dead.
Dead? Can you be more specific?

[Kevorkian]

a bug:

if you put money in bank and you retire the amount you haven't the money in the counter

[Link14716]

Hm..i've set the points to 1 per shout but it did not update the points.
What shoutbox version?

[Link14716]

a bug:

if you put money in bank and you retire the amount you haven't the money in the counter
Huh?

[NuclioN]

forums/uttstore.php?do=a&aid=14 etc. when you click on the navbar link 'store' and on 'most sold' ... there are links to thief, glowing username etc. and they are all dead.

Oef..version shoutbox..i've installed it when you where forced to remove it here because that htl discussion.

[Link14716]

forums/uttstore.php?do=a&aid=14 etc. when you click on the navbar link 'store' and on 'most sold' ... there are links to thief, glowing username etc. and they are all dead.

Oef..version shoutbox..i've installed it when you where forced to remove it here because that htl discussion.
You mean they link to uttstore.php instead of ushop.php?

The shoutbox version has to be at least 1.02 for points per shout to work.

[Zelda-King]

Yes they did link to uttstore.php instead of ushop.php. I fixed that for myself though. Incidentally if anyone does what I did to ushop.php making it point to the renamed functions_ushop.php you'll also need to change the store admin file likewise.

[Link14716]

You still shouldn't do that. :p

I believe I fixed all the links now since there is only one instance of uttstore.php and that is for including the functions file.

[erikajune]

Can you answer the questions outlined in the first post so I can see if I can get to the bottom of this?

Did you run the standalone or HTL installer? Manually

What is the exact error you recieve? Links in Quick Nav link to a search page off my site and I occassionally get this error: "Warning: Invalid argument supplied for foreach() in /home/erika/public_html/community/ushop.php on line 144" when I use the backbutton from these search pages. However I can refresh and then the error disapears.

Where does the supposed error happen? Quick Nav, Change/Remove glow or username color. Error at ushop.php

What vB version are you running? 3.0.0 Gold

[Zelda-King]

Incidentally, from experience: anyone using HTL should NOT include the autoparsed tags on the beginning and end of each code (ie CHANGEID=1] and whatever. A few changes happen in places where such tags will ruin the string... such as in the middle of a query.

That is nothing to do with the coding of this hack. That is how HTL works.

[NuclioN]

You mean they link to uttstore.php instead of ushop.php?



yep :) Sorry. I've to read the fast growing reply's to find out how to update the style templates the fastest way

[Link14716]

Did you run the standalone or HTL installer? Manually

What is the exact error you recieve? Links in Quick Nav link to a search page off my site and I occassionally get this error: "Warning: Invalid argument supplied for foreach() in /home/erika/public_html/community/ushop.php on line 144" when I use the backbutton from these search pages. However I can refresh and then the error disapears.

Where does the supposed error happen? Quick Nav, Change/Remove glow or username color. Error at ushop.php

What vB version are you running? 3.0.0 Gold
I still don't see how this would be happening. Can you redownload and run the templates part of the installer (after re-uploading)? As for the error, there is absolutely no reason it'd only happen occasionally. Are you sure you edited global.php correctly?

[Link14716]

Incidentally, from experience: anyone using HTL should NOT include the autoparsed tags on the beginning and end of each code (ie CHANGEID=1] and whatever. A few changes happen in places where such tags will ruin the string... such as in the middle of a query.

That is nothing to do with the coding of this hack. That is how HTL works.
The HTL is frustrating, which is why I burried the install and it won't be updated until some annoying bugs in the HTL are fixed. It was good for the early alpha builds, but now that the standalone installer is working perfectly, it isn't needed anymore.

[Link14716]

yep :) Sorry. I've to read the fast growing reply's to find out how to update the style templates the fastest way
Either do a find/replace across all templates for uttstore.php and replacing with ushop.php, or redownload, re-upload the installer, and click the link that says "Click here to install ONLY the templates (useful after upgrading vBulletin) -->"

[Link14716]

You need to calm down...

[erikajune]

I still don't see how this would be happening. Can you redownload and run the templates part of the installer (after re-uploading)? As for the error, there is absolutely no reason it'd only happen occasionally. Are you sure you edited global.php correctly?

How do I just run the templates part of the installer? And after re-uploading what? All the edited files and files that came with the hack?

And like someone else said, to other people those links I said linked to a search page, are dead to them... go to a page cannot be displayed page.

I'm pretty sure I edited global.php correctly. I had to redo that one a zillion times to get things to work. I'll check it again though.

Ugh.

[filth]

bit of cheeck isnt it after the grief youve been giving them

[Link14716]

How do I just run the templates part of the installer? And after re-uploading what? All the edited files and files that came with the hack?

And like someone else said, to other people those links I said linked to a search page, are dead to them... go to a page cannot be displayed page.

I'm pretty sure I edited global.php correctly. I had to redo that one a zillion times to get things to work. I'll check it again though.

Ugh.
Re-download the zip file and re-upload the installer. When you load up ushop_install.php, there is a link: "Click here to install ONLY the templates (useful after upgrading vBulletin) -->", use it to redo the templates.

[filth]

so because you made a thread it gives you the right to give people grief

anyway I thought you were a member of the DH0 Crew. A hacker that cant even instal a php script sure ure not just a script kiddie

[Link14716]

And also.. yall should put a name in tha first thread.!!!!

i was tha cheeror....

if it wasnt for me.. this woulda been delayed.. extra 2 weeks...

and plus i made tha thread on tha shop hack.. that everybody and there family thread posted too...

i think my name should be in ta "other support"
You did nothing to support this hack, and in fact it would not have been delayed if it wasn't for you. Shut your mouth and get your facts straight next time, ok?

[filth]

who tha hell said i was a hacker??/

i jus got connections.. for dirty work

u said and I quote


i will cal my crew " DH0 Crew "


that sounds like you are trying to say that you are in the crew.

But as you are not in the crew that makes all the difference. I retract what I said and replace it with

why dont you get 1 of your connections to install it for you

[Link14716]

cuz they aint do that ++++....

now if u keep talk shyt.. u might find out wat kinda work that.. they do
And you need to stop with hack threats. You realize that's a bannable offence? You are not a god, you did not do anything, you need to shut up, seriosuly.

[filth]

ooh look you showing how mature you are and threatening to get peoples sites hacked again

[Link14716]

hey now i never threatend. ++++..

and plus nobody has prof if dH0 hacks
You're just digging yourself into a bigger hole.

[filth]

hey now i never threatend. ++++..

and plus nobody has prof if dH0 hacks

lol try doing a search on google for dH0 crew im sure you will find some

i will cal my crew " DH0 Crew "

and i know u heard of them hackers

and suppose you didnt mean heackers when you posted that, and if thats not a threat I dont know what is.

oh and i suppose the following was just a freindly comment

cuz they aint do that ++++....

now if u keep talk shyt.. u might find out wat kinda work that.. they do

[ptbyjason]

When I click on an item in ushop, it takes me to this page: http://www.incredifind.com/index.cfm?action=lookup&pc=wmrif&Keywords=http://www.onlineparents.net/community/uttstore.php?do=a&aid=10

Any idea why it would be doing this?

And the prices aren't showing up properly. It's displaying all the costs of items as 9 times the amount I specified in the acp. Weird....
That sounds like spyware on your computer that either changed the coding of the hack, or redirected your browser. Run spybot or ad-aware and get rid of the spyware.

[Zelda-King]

I have someone who's points're in the minus range (-9). Is that normal? Everything else has been fine still, by the way. Even with the Arcade Pass. :)

[vhoang]

To Matt: i cant seem to get "point per view" to work, u have any suggestion? Thanks.

[vhoang]

I have someone who's points're in the minus range (-9). Is that normal? Everything else has been fine still, by the way. Even with the Arcade Pass. :)

He/she might have tried "Thief" options!!!

[Link14716]

I have someone who's points're in the minus range (-9). Is that normal? Everything else has been fine still, by the way. Even with the Arcade Pass. :)
Sounds like a possible small bug.Can you go to that user's user history (ushop.php?do=userhistory&u=<userid>) and see what actions they used to get into the negatives?

[Link14716]

To Matt: i cant seem to get "point per view" to work, u have any suggestion? Thanks.
I think Zachery missed a file edit when he was making the HTML file. Hold on and I'll post it.

EDIT: More than one actually.

[vhoang]

I think Zachery missed a file edit when he was making the HTML file. Hold on and I'll post it.

EDIT: More than one actually.

Clear enuf, thanks. I'll wait for ur post.

[Link14716]

From what I can see, Zachery missed two file edits - meaning points per views and points for reputation won't work.

In reputation.php:
Find:
$DB_site->query("
INSERT INTO " . TABLE_PREFIX . "reputation (postid, reputation, userid, whoadded, reason, dateline)
VALUES ($postid, $score, $userid, $bbuserinfo[userid], '" . addslashes(fetch_censored_text($reason)) . "','" . TIMENOW . "')
");
Add below:
// ### START UTT POINTS SYSTEM ###
if ($vboptions['uttpoints_enablesystem'] == '1')
{ // It's enabled! Yay!
if ($score > '0')
{ // If the amount of reputation is positive...
if ($vboptions['uttpoints_pointsforgreputation'] != '0')
{ // Needed value is not 0... good.
$givethempoints = ($vboptions['uttpoints_pointsforgreputation'] * $score);
}
}
else
{ // If the amount of reputation is negative...
if ($vboptions['uttpoints_pointsforbreputation'] != '0')
{ // Needed value is not 0... good.
$givethempoints = ($vboptions['uttpoints_pointsforbreputation'] * $score);
}
}
if (isset($givethempoints))
{ // If they get money....
// Send the query and we're done.
$DB_site->query("UPDATE ".TABLE_PREFIX . $vboptions[uttpoints_pointtable]." SET ".$vboptions[uttpoints_pointsfield]."=".$vboptions[uttpoints_pointsfield]."+".$givethempoints." WHERE userid='$userinfo[userid]'");
}
}
In showthread.php:
Find:
$DB_site->shutdown_query("
INSERT INTO " . TABLE_PREFIX . "threadviews (threadid)
VALUES (" . intval($threadinfo['threadid']) . ')'
);
}
Add below:
// ### START UTT POINTS SYSTEM ###
if ($vboptions['uttpoints_enablesystem'] == '1')
{ // It's enabled! Yay!
if ($thread['postuserid'] != $bbuserinfo['userid'])
{ // Don't give points if the user viewing the thread is the one who created it.
if ($vboptions['uttpoints_perview'] != '0' && $forum['uttpoints_perview'] != '0')
{ // Both needed values are not 0... good.
$givethempoints = ($vboptions['uttpoints_perview'] * $forum['uttpoints_perview']);
}
}
if (isset($givethempoints))
{ // If they get money....
// Send the query and we're done.
$DB_site->shutdown_query("UPDATE ".TABLE_PREFIX . $vboptions[uttpoints_pointtable]." SET ".$vboptions[uttpoints_pointsfield]."=".$vboptions[uttpoints_pointsfield]."+".$givethempoints." WHERE userid='$thread[postuserid]'");
}
}

The zip will be updated accordingly in a few minutes.

[Zelda-King]

Sounds like a possible small bug.Can you go to that user's user history (ushop.php?do=userhistory&u=<userid>) and see what actions they used to get into the negatives?It says "No History Found". They've gone up to 17 now, by the way (+17 that is).

[vhoang]

Updated, it works. Thanks Matt a bunch!!!!!

[erikajune]

Re-download the zip file and re-upload the installer. When you load up ushop_install.php, there is a link: "Click here to install ONLY the templates (useful after upgrading vBulletin) -->", use it to redo the templates.

That worked! :D The links now work.

Now just that error I get every once and a while. Hmmm

Also, when I went to remove a glow - it charged me the amount of a glow. ??

[Link14716]

That worked! :D The links now work.

Now just that error I get every once and a while. Hmmm

Also, when I went to remove a glow - it charged me the amount of a glow. ??
...it shouldn't have. Are you sure it charged you again to remove it?

[AN-net]

how did u forget that!! drrrr!

[SmasherMaster]

I'd recommend that as well. Be sure to redownload first, though, since there have been some fixes to the installer.


I did, still got the same error and still no actions found!!!!!! :mad:

[Link14716]

Did you follow the instructions in the first post after re-installing?

[mantra]

is there anyway I can just install the uCash portion .. since I only want my members to earn points and they can redeem them in another way ? ..

thanks

[Link14716]

is there anyway I can just install the uCash portion .. since I only want my members to earn points and they can redeem them in another way ? ..

thanks

Upload only the installer to the admincp folder. Do all file edits except global.php, includes/init.php, and admincp/usergroup.php, all template edits except for navbar, and then install it normally. Afterawards, you can run these queries to get rid of the uShop part:

DROP TABLE IF EXISTS utt_store_action;
DROP TABLE IF EXISTS utt_store_bank;
DROP TABLE IF EXISTS utt_store_history;
ALTER TABLE user DROP `uttstore_history` , DROP `uttstore_glow` , DROP `uttstore_usernamecolor` , DROP `uttstore_boldusername` , DROP `uttstore_italicsusername` , DROP `uttstore_bankdata` , DROP `uttstore_bankqueue`;
ALTER TABLE usergroup DROP `uttstore_discount`;
DELETE FROM datastore WHERE title='utt_store_act';

[dstruct2k]

any hacks that will let me sell my own items to the users of my forum (i.e. dvds, cds, etc)

thanks
Ahem... Link, I think you're kinda lying... :D

This can be done, but don't expect anyone to do it for you. What it would take is creating a new action.*.php file that somehow places an order to another form where it is processed and you (or another company) follows through and delivers.


Not easy, but possible. :)

[mantra]

if I get rid of the ushop part, my members will still earn points, correct?
how can they redeem them ? i just want them to donate points to me in return for some prize ..

thanks

[AutomatikStudio]

I'm somewhat confused. Of all of the file updates that have had to be made...has the original files in the first post been updated to reflect these changes? 27 pages of posts are a lot to sift through to find all the changes that need to be made.

[dstruct2k]

Well, go through at a quick glance if you're looking for updates, and turn posts-per-page to max. :)

Although Matt should probably think about getting the first post updated with all these fixes, or at least making a 0.95. :)

[Link14716]

Ahem... Link, I think you're kinda lying... :D

This can be done, but don't expect anyone to do it for you. What it would take is creating a new action.*.php file that somehow places an order to another form where it is processed and you (or another company) follows through and delivers.


Not easy, but possible. :)
I said it can't because it can't by default.

[Link14716]

if I get rid of the ushop part, my members will still earn points, correct?
how can they redeem them ? i just want them to donate points to me in return for some prize ..

thanks
Donate is a part of uShop.

[Link14716]

I'm somewhat confused. Of all of the file updates that have had to be made...has the original files in the first post been updated to reflect these changes? 27 pages of posts are a lot to sift through to find all the changes that need to be made.
Only things that will break features have been fixed in the main post.

[dstruct2k]

mantra:
You're wanting to only install PART of this hack, so expect to have some work ahead of you too, because that's what it will take to do what you want. A query to remove points from a user is easy, but remember that you need to code a page that does that. :)

[Link14716]

mantra:
You're wanting to only install PART of this hack, so expect to have some work ahead of you too, because that's what it will take to do what you want. A query to remove points from a user is easy, but remember that you need to code a page that does that. :)
I suggest that mantra should just insstall the full hack, disable every action except donate and possibly admin donate, and not do the navbar template edits. That should work well.

[dstruct2k]

Yeah, then all he would have to do is create a couple custom actions and BOOM he has a shop. :D

[Link14716]

Not everyone can make custom actions.

[NuclioN]

This is a great hack :) Tnx Link4716 for your support

[Cyricx]

Is there a way I can make a limit on the number of points a person can get? Other then from donations.

Thinking modifying a query so that it only adds if it the users points is < 10000.00 or something like that.

[dstruct2k]

Make some sort of cronjob or something that essentially does this:

IF user_points > x
SET user_points = x


Very simple, although I'm not gonna bother coding it. :)

Maybe adding it to global.php or something would be better though.

[Link14716]

Actually, a cron job wouldn't work right. ;)

Instead, it'd be a few if statements everywhere you get points.

[Cyricx]

Did you run the standalone or HTL installer?
Standalone

What is the exact error you recieve?
Foreach

Where does the supposed error happen?
when viewing ushop.php

What vB version are you running?
Gold

Following these instructions corrected the problem -

IF YOU ARE HAVING FOREACH ERRORS IN GLOBAL.PHP OR NO ACTION ERRORS:
First, remove the second global.php edit. Then run ushop.php?rebuildds=1. Then put the edit back in adns ee if that works. If it doesn't work, answer the questions above, if it does, post saying that and let me know in the post if you used the HTL or standalone installer. This will help me diagnose the problem as to whether it is a user error or an error on one of the installers. Thank you.


Awesome hack guys :), thank you!!

[Cyricx]

Okay :), I'll start doing some digging then to try to make the modification.

EDIT - got it workin :), going through and finding some instances of
if (isset($givethempoints))

and replacing it with
if (isset($givethempoints) AND ($bbuserinfo['uttpoints'] < '10000'))

[SmasherMaster]

Link.....The file edits did something but I still am getting a no actions found AND I can't find points in the User.php in the admin cp and there's nothing about the store in the forum options either. Oh BTW, HTL won't let me uninstall the file. I hit uninstall and it sits there.

[Link14716]

Link.....The file edits did something but I still am getting a no actions found AND I can't find points in the User.php in the admin cp and there's nothing about the store in the forum options either. Oh BTW, HTL won't let me uninstall the file. I hit uninstall and it sits there.
You can't uninstall from the HTL. You have to uninstall through the standalone.

[PixelFx]

did install with out HTL seems to work good so far ...

[SmasherMaster]

MMM k....everything works. EXCEPT, I followed ALL the file edits it told me to do. And i'm still getting the ustore.php line 144 error and no actions found...

Help plz.

[Zachery]

MMM k....everything works. EXCEPT, I followed ALL the file edits it told me to do. And i'm still getting the ustore.php line 144 error and no actions found...


Help plz.
Hit CTRL F5 and see if its not a cache problem

[msimplay]

hey was just wondering i used to use the usergroup settings for rankings but i would like to add them as shop items instead how would i go about this ?

this is the link to my rank settings explanation as it is now
http://www.wambam.net/vbulletin/showthread.php?t=134

[Link14716]

MMM k....everything works. EXCEPT, I followed ALL the file edits it told me to do. And i'm still getting the ustore.php line 144 error and no actions found...


Help plz.
Take a look at the first post.

IF YOU ARE HAVING FOREACH ERRORS IN GLOBAL.PHP OR NO ACTION ERRORS:
First, remove the second global.php edit. Then run ushop.php?rebuildds=1. Then put the edit back in adns ee if that works. If it doesn't work, answer the questions above, if it does, post saying that and let me know in the post if you used the HTL or standalone installer. This will help me diagnose the problem as to whether it is a user error or an error on one of the installers. Thank you.

Have you tried that?

[Link14716]

hey was just wondering i used to use the usergroup settings for rankings but i would like to add them as shop items instead how would i go about this ?

this is the link to my rank settings explanation as it is now
http://www.wambam.net/vbulletin/showthread.php?t=134
Are you using it via the promotions system, or...?

[PixelFx]

Wow lots of posts, I've done the install twice both before and after your last update of the script, so far no errors, fill tweaks to the install doc needed but otherwise, doing half searches for content found what I needed to do the install. For a beta this is pretty stable, good job guys.

I'd love to add avatar added to it .. but otherwise DAWMM this is cool!

Demo: you can see install on my site at:
http://www.orbsydia.com/forum/ushop.php (site fully active)
&
http://www.pixelfx.ca/forum/ushop.php (register turned off on pixelfx)

The only thing I can't wait for is updating users posts made already, but you said 1.0 so thats all good.

Keep up the good work!! Going to try and install arcade pass hack now :)


your 144 error above is .. cause someone has the v3arcade installed


goto init.php and make sure it looks like this ;)

'stylecache',
'utt_store_act',
'arcadesettings',


aka your missing the , after .. 'utt_store_act'

that will fix that issue :)

[lasto]

Wow lots of posts, I've done the install twice both before and after your last update of the script, so far no errors, fill tweaks to the install doc needed but otherwise, doing half searches for content found what I needed to do the install. For a beta this is pretty stable, good job guys.

I'd love to add avatar added to it .. but otherwise DAWMM this is cool!


I agre with Pixelfx - 26 pages full yet the hack does work fine.Its that HTL hack thats messed it up for everyone i reckon.Normal way was only a few minor bug fixes that would of needed sortign but its gone way beyond that for some people.
Also make sure u use a proper php editor to do the files such as Ultra Edit 10 etc
as some mistakes are actually caused by the program u use to edit the files.

Good hack Geeky team :)

Yeah wheres the load avatar part (cant have a store without avatar:)) also how about someone doing the templates to show them pics and breath a bit a life into the store :)

:banana: Pics say more than a thousand words ........................... But no rush :banana:

[PixelFx]

I love ultraedit 10+, tis what I use for everything its worth every penny, make sure to set it to find every instance and match case, and if editing many files check for changes all files opened. It's saved my butt a few times for hacking vb2/3 I can't live with out it heh

Ok first error, if I try to change

Help http://www.orbsydia.com/forum/cpstyles/vBulletin_3_Frontend/cp_help.gif (http://www.orbsydia.com/forum/admincp/usergroup.php?s=&do=edit&usergroupid=8#)
uTT Store Settings Usergroup Discount?Set this to the percent that is taken off the normal cost for this usergroup (negative adds cost). Set to '0' to have no effect.

in the user group :P

I get the following error, not sure if I missed something or not. Please note this is for a custom group on my forums.



Database error in vBulletin 3.0.0:
Invalid SQL: UPDATE usergroup SET
### UPDATE QUERY GENERATED BY fetch_query_sql() ###
title = 'Orb Internal Tester',
description = 'These Members have been invited to test core tools we need testing on before the public gets a shot.',
usertitle = 'Orb Internal Tester',
opentag = '',
closetag = '',
passwordexpires = '0',
passwordhistory = '0',
ispublicgroup = '0',
canoverride = '0',
attachlimit = '0',
avatarmaxwidth = '64',
avatarmaxheight = '64',
avatarmaxsize = '28000',
profilepicmaxwidth = '100',
profilepicmaxheight = '100',
profilepicmaxsize = '100000',
pmquota = '150',
pmsendmax = '0',
uttstore_discount = '0',
1 = '',
2 = '',
4 = '',
8 = '',
16 = '',
32 = '',
64 = '',
128 = '',
256 = '',
512 = '',
1024 = '',
2048 = '',
4096 = '',
8192 = '',
16384 = '',
32768 = '',
65536 = '',
131072 = '',
262144 = '',
forumpermissions = '111103',
pmpermissions = '1',
calendarpermissions = '17',
wolpermissions = '1',
adminpermissions = '0',
genericpermissions = '5703',
genericoptions = '31',
linkspermissions = '0',
arcadepermissions = '19'
WHERE usergroupid=8
mysql error: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '1 = '',
2 = '',
4 = '',
8 = '',
16 = '',
32 = '',
64 = ''
mysql error number: 1064
Date: Tuesday 13th of April 2004 08:42:22 PM
Script: http://www.orbsydia.com/forum/admincp/usergroup.php (http://www.orbsydia.com/forum/admincp/usergroup.php)
Referer: http://www.orbsydia.com/forum/admincp/usergroup.php?s=&do=edit&usergroupid=8 (http://www.orbsydia.com/forum/admincp/usergroup.php?s=&do=edit&usergroupid=8)
Username: Khaybel

[SmasherMaster]

Thanks alot PixelFX. :)


Link: Same problem happens. No actions found.

[Link14716]

Where did all this come from?

1 = '',
2 = '',
4 = '',
8 = '',
16 = '',
32 = '',
64 = '',
128 = '',
256 = '',
512 = '',
1024 = '',
2048 = '',
4096 = '',
8192 = '',
16384 = '',
32768 = '',
65536 = '',
131072 = '',
262144 = '',

[NyCwill]

There seem to be a problem of the value shown in the store.

I set the point value for Change custom title to 400 but it show 360 in the store and I didnt set any tax percent. But when I about to confirm the transaction it show the value of 400 points.

Can someone tell me how to fix this

[Zachery]

There seem to be a problem of the value shown in the store.

I set the point value for Change custom title to 400 but it show 360 in the store and I didnt set any tax percent. But when I about to confirm the transaction it show the value of 400 points.

Can someone tell me how to fix this
Differnt usergroups gets discounts, ill make sure the templates include it if possible for .94

[NyCwill]

but shouldnt it show 360 when I'm about to confirm the action?

[Link14716]

but shouldnt it show 360 when I'm about to confirm the action?
Yes it should.

[NyCwill]

but home come it still show the full value.. as you can see in my screenshots....

[Link14716]

but shouldnt it show 360 when I'm about to confirm the action?
Fixed for 0.94.

In template uttstore_standard_confirmation:
Find:
<fieldset><legend>Cost:</legend><div style="text-align: right;">$action[cost]</div></fieldset>
Replace with:
<fieldset><legend>Cost:</legend><div style="text-align: right;">$cost</div></fieldset>

[Link14716]

but home come it still show the full value.. as you can see in my screenshots....
Just posted the fix. ;)

[Zachery]

I was refering to the discount too ^_^

[Link14716]

Thanks alot PixelFX. :)


Link: Same problem happens. No actions found.
Run this query and tell me how many rows it returns (should be 18):
SELECT * FROM utt_store_action;
And then run this query and tell me what is in the 'data' column:
SELECT * FROM datastore WHERE title='utt_store_act';

[Mijae]

I have a suggestion to make:

You should add a feature to change the name of "Points", so with one edit in the AdminCP, all instantes of the word point change to whatever you want.

It'd be so good :P

[Zachery]

planed for the next major release already

[Mijae]

planed for the next major release already
Cool.

Ahother thing I noticed is that people can't withdraw from the bank after they make a deposit.

Or are me and my members just blind?

[Zachery]

Bleh i forgot to edit a template im guessing

make sure all the phrases say uttstore_ and not ushop in the bank template

[dniMTheory]

Request, if possible

Limit the amount of points a member can receive for replying to a thread. So for example, if they reply to a thread 20 times, they only get paid points for their first 3 replies and not all 20.

[Link14716]

Cool.

Ahother thing I noticed is that people can't withdraw from the bank after they make a deposit.

Or are me and my members just blind?
I cannot confirm this.

[Link14716]

Request, if possible

Limit the amount of points a member can receive for replying to a thread. So for example, if they reply to a thread 20 times, they only get paid points for their first 3 replies and not all 20.
I might think about implementing this for 1.00. ;)

[Skyline_GT]

can this intergrate with the arcade?
like to win points?

[GeekyDesigns]

can this intergrate with the arcade?
like to win points?
Niether of us deals with flash, and the only person in GeekyDesigns who does flash doesnt know php or mysql your best off trying to talk to Jon, unless im missing somthing ^_^

[filth]

Cool.

Another thing I noticed is that people can't withdraw from the bank after they make a deposit.

Or are me and my members just blind?


Yup looks like you are right never noticed that myself till I saw your post

[Zachery]

Check the bank template and makesure the phrases are pointing to uttstore instead of ushop

[SmasherMaster]

Run this query and tell me how many rows it returns (should be 18):
SELECT * FROM utt_store_action;
And then run this query and tell me what is in the 'data' column:
SELECT * FROM datastore WHERE title='utt_store_act';


13 rows


look at the attachemtn for the data....too big to post

[Link14716]

13 rows


look at the attachemtn for the data....too big to post
There's no reason why it wouldn't work, so I ask you again: are you sure you edited global.php correctly?

[Link14716]

can this intergrate with the arcade?
like to win points?
Look for the Arcade Pass Hack v3 hack in the Beta Releases.

[Link14716]

Yup looks like you are right never noticed that myself till I saw your post
I still cannot confirm this.

[msimplay]

Are you using it via the promotions system, or...? thats the promotions system so far but i want to do that via the store if its possible
ie those items for sale instead of via the promotions system via postcount

[AN-net]

does the bank have interest?

[SmasherMaster]

There's no reason why it wouldn't work, so I ask you again: are you sure you edited global.php correctly?
Yep!

[Zachery]

does the bank have interest?
Yes

[Link14716]

does the bank have interest?
Yes. Edit the bank action to change the interest rate among other things.

[Link14716]

Yep!
Well, according to the data in your datastore, it has actions. The edit to last global.php edit is needed for them to show up (and it is almost at the very bottom of global.php). If you are sure you have edited global.php correctly, then what about the includes/init.php edit?

[gmarik]

Anybody tested this? How is it?

[msimplay]

hmm a feature should be that people get notified who donates to them

[GeekyDesigns]

hmm a feature should be that people get notified who donates to them
Were working on getting our site & support up, just waiting for the server to be finished, we will have the support desk setup, but not the forums untill we get a few more installs or donations :)

[msimplay]

Were working on getting our site & support up, just waiting for the server to be finished, we will have the support desk setup, but not the forums untill we get a few more installs or donations :) hmm i was also asking about the custom avatar action before remember :p

ps i asked this before but i didn't get the right answer lols
so i'll rephrase

check this link
http://www.wambam.net/vbulletin/showthread.php?t=134

it shows my ranking system
i want to know if its possible to add those as actions to the shop for x amount of points rather then using the ranking system and how ?

my ranking system is pretty much not needed if it can be done via the shop
and its conflicting in terms of user titles are already rank

[Zachery]

Sorry, i havent had time to look into, i have a massive ammount of work over the next few days >.>

[Link14716]

hmm i was also asking about the custom avatar action before remember :p

ps i asked this before but i didn't get the right answer lols
so i'll rephrase

check this link
http://www.wambam.net/vbulletin/showthread.php?t=134

it shows my ranking system
i want to know if its possible to add those as actions to the shop for x amount of points rather then using the ranking system and how ?

my ranking system is pretty much not needed if it can be done via the shop
and its conflicting in terms of user titles are already rank
If you use secondary usergroups you can use the seconday usergroup action, and you can copy it and change the usergroups that you can buy with it to make them cost a different amount.

[erikajune]

I am still getting this error once and awhile:
Warning: Invalid argument supplied for foreach() in /home/erika/public_html/community/ushop.php on line 144
When I get this error, it is on a "No Action Found" page. If I refresh, the error goes away. But I still get it somewhere in the shop pages once and awhile.

I have done this several times:
IF YOU ARE HAVING FOREACH ERRORS IN GLOBAL.PHP OR NO ACTION ERRORS:
First, remove the second global.php edit. Then run ushop.php?rebuildds=1. Then put the edit back in adns ee if that works. If it doesn't work, answer the questions above, if it does, post saying that and let me know in the post if you used the HTL or standalone installer. This will help me diagnose the problem as to whether it is a user error or an error on one of the installers. Thank you.
But it doesn't fix it.

If you need to see what I mean:
www.onlineparents.net/community
Log in: testmember
Pass: test

Standalone, vB3 Gold

Thanks for the help! :D It otherwise works very well.

[SmasherMaster]

I am still getting this error once and awhile:

When I get this error, it is on a "No Action Found" page. If I refresh, the error goes away. But I still get it somewhere in the shop pages once and awhile.

I have done this several times:

But it doesn't fix it.

If you need to see what I mean:
www.onlineparents.net/community
Log in: testmember
Pass: test

Standalone, vB3 Gold

Thanks for the help! :D It otherwise works very well.
....Exact same problem....Link, there's something wrong.

[erikajune]

Oh and is there a way to add a color code thingy to the glow and username color page? So that people who don't know the color codes have more to chose from?

[Xenon]

I am still getting this error once and awhile:

When I get this error, it is on a "No Action Found" page. If I refresh, the error goes away. But I still get it somewhere in the shop pages once and awhile.

I have done this several times:

But it doesn't fix it.

If you need to see what I mean:
www.onlineparents.net/community
Log in: testmember
Pass: test

Standalone, vB3 Gold

Thanks for the help! :D It otherwise works very well.
well, i haven't checked the code much, so, Link or Zak have to find the bug themselves, but as a short solution this might help:

find this code:
if (!isset($storeactions) || empty($storeactions)) {
$message = "No actions found...";
uttstore_print_end_message($message);
}

and replace with
if (!is_array($storeactions)) {
$message = "No actions found...";
uttstore_print_end_message($message);
}

[vhoang]

What if we enable "Arcade Pass" ? Does this prevent users from playing Arcade immediately? Does this mean any user must buy an Arcade pass to play?

Can we apply points gained by this hack to play/bet/reward when playing Arcade?

[erikajune]

Fantastic Xenon! That worked.

Thanks so much!

[erikajune]

Oh and can this be added: A PM to the person who got their money stolen to let them know?

[erikajune]

Fantastic Xenon! That worked.

Thanks so much!

Ok... well I occasionally get "no Action Found" but no error... :D

[Xenon]

Ok... well I occasionally get "no Action Found" but no error... :D
:)

well as said, i couldn't look for the bug itself, but the prevention of the error is something i could do :)

[erikajune]

I'm happy. Thanks, again.

[SmasherMaster]

Xenon's fix did not work.....but i'm not getting any line 144 error anymore, but STILL no actions found.

Link, you said I should have 18 rows, why do I have 13?

[Link14716]

Xenon's fix did not work.....but i'm not getting any line 144 error anymore, but STILL no actions found.

Link, you said I should have 18 rows, why do I have 13?
I really don't know. Send me an IM on AIM or MSN or something and I'll see about helping you sort the problem.

[Link14716]

What if we enable "Arcade Pass" ? Does this prevent users from playing Arcade immediately? Does this mean any user must buy an Arcade pass to play?

Can we apply points gained by this hack to play/bet/reward when playing Arcade?
The Arcade Pass Hack is a seperate hack released in the Beta Releases forum. The action requires that hack to be installed.

[M1th]

Xenon's fix did not work.....but i'm not getting any line 144 error anymore, but STILL no actions found.

Link, you said I should have 18 rows, why do I have 13? Have you set the usergroup permissions properly?

Also Note that you will NEED to click submit in the usergroup manager, even if you dont want anything changed in a usergroup. This will update the permissions.

Link14716 (https://vborg.vbsupport.ru/member.php?u=15527): I think thats what is causing this. They would need to do that after they've done the file edits, otherwise the permissions wont get updated.

[Link14716]

There are no permissions in the usergroup manager that would affect which actions are displayed.

[Zachery]

Just an update were about at 50% of our funds for the new site, if anyone can help donate it would be great.

Direct PM's to Me Matt or GeekyDesigns, they will get anwsered asap :)

[M1th]

There are no permissions in the usergroup manager that would affect which actions are displayed. Oh right.. sorry.

* M1th hasnt installed it yet.

[Yuber]

Thanks for sharing, this is a great hack.

[Leah]

Xenon's fix did not work.....but i'm not getting any line 144 error anymore, but STILL no actions found.



Mine seems to work after I set the Use Quantity System? to no.

[DiLLuZioN]

thanks for the hack, works 100% errorless @ my forums.

confusing to find everything @ first, but it works good. thanks for releasing it.

/me clicks install

[NameWolf]

Thanks Guys ! Installed & Works perfectly on our forums.

Just a question, is there any way we can import previous post counts ?

Thanks again !

NW

[ToB]

Just installed it on my community (http://www.evboard.com) and my users LOVE it!!!

[Vivi Ornitier]

Is there a way to exclude members from getting points in certain forums that let's say don't enable post counts? that would be very nice

[Link14716]

Edit the forum and set all 3 of the options (points per thread, reply, and view) to 0.

[Skyline_GT]

one suggestion..
I wonder is it possible to pay for donwload attachments?
like 5 dollars to download each attachment..

[Link14716]

one suggestion..
I wonder is it possible to pay for donwload attachments?
like 5 dollars to download each attachment..
Heh, I'll look into it for 1.00. :) Shouldn't be hard at all. ;)

[Skyline_GT]

Heh, I'll look into it for 1.00. :) Shouldn't be hard at all. ;)
Great:)

[tnguy3n]

anyone actually has this hack worked? I got this error message ever time install the hack
Parse error: parse error in /path/to/public_html/forumvb/includes/functions.php on line 1871

Fatal error: Call to undefined function: is_browser() in /path/to/public_html/forumvb/global.php on line 59

I tested on an unhacked board and still no luck ... got same error message.

[Zachery]

anyone actually has this hack worked? I got this error message ever time install the hack

I tested on an unhacked board and still no luck ... got same error message.
Hack is working fine on tons of sites


is_browser() is a built in vB function, if its not working theres a problem with your files.

[tnguy3n]

i'll probably try it again later, but i tested it on both 3.0.0 and 3.0.1.

[NameWolf]

Anyway we can give points to our existing members based on their previous post count ? They are pretty pissed about losing all their previous forum points with the new system ? :)

Thanks in advance.

NW

[GeekyDesigns]

Anyway we can give points to our existing members based on their previous post count ? They are pretty pissed about losing all their previous forum points with the new system ? :)

Thanks in advance.

NW
If you know where the old poitns were stored or know the hack pm link and he can help.

[tnguy3n]

okie, i found this intereting....

in file includes/functions.php

If I replace:
$user['musername'] = $usergroupcache["$displaygroupid"]['opentag'] . $username . $usergroupcache["$displaygroupid"]['closetag'];

With:
// ## <ucs>
$user['musername'] = $username;
($user['uttstore_italicsusername'] != '0' && $user['uttstore_italicsusername'] != '' ? $user['musername'] = "<i>" . $user['musername'] . "</i>" : "");
($user['uttstore_boldusername'] != '0' && $user['uttstore_boldusername'] != '' ? $user['musername'] = "<b>" . $user['musername'] . "</b>" : "");
($user['uttstore_usernamecolor'] != '0' && $user['uttstore_usernamecolor'] != '' ? $user['musername'] = "<font color=\"$user[uttstore_usernamecolor]\">" . $user['musername'] . "</font>" : "");
$user['musername'] = $usergroupcache["$displaygroupid"]['opentag'] . $user['musername'] . $usergroupcache["$displaygroupid"]['closetag'];

// ## </ucs>

I got an error message as mentioned in previous post. However, if i leave dis includes/functions.php file unchanged (or un-editted), the point/money/bank system works. but i guess the bold/italic title won't work in dis case.

anyway to fix this problem?

[msimplay]

i hate to ask this but it would be good if the next version has the ability as an action to buy custom avatars in the same way as custom user titles
and change next persons title
and same for signatures

[Link14716]

okie, i found this intereting....

in file includes/functions.php

If I replace:
$user['musername'] = $usergroupcache["$displaygroupid"]['opentag'] . $username . $usergroupcache["$displaygroupid"]['closetag'];

With:
// ## <ucs>
$user['musername'] = $username;
($user['uttstore_italicsusername'] != '0' && $user['uttstore_italicsusername'] != '' ? $user['musername'] = "<i>" . $user['musername'] . "</i>" : "");
($user['uttstore_boldusername'] != '0' && $user['uttstore_boldusername'] != '' ? $user['musername'] = "<b>" . $user['musername'] . "</b>" : "");
($user['uttstore_usernamecolor'] != '0' && $user['uttstore_usernamecolor'] != '' ? $user['musername'] = "<font color=\"$user[uttstore_usernamecolor]\">" . $user['musername'] . "</font>" : "");
$user['musername'] = $usergroupcache["$displaygroupid"]['opentag'] . $user['musername'] . $usergroupcache["$displaygroupid"]['closetag'];

// ## </ucs>

I got an error message as mentioned in previous post. However, if i leave dis includes/functions.php file unchanged (or un-editted), the point/money/bank system works. but i guess the bold/italic title won't work in dis case.

anyway to fix this problem?
What are you using to edit the files?

EDIT: Read this post. (https://vborg.vbsupport.ru/showpost.php?p=499781&postcount=249) It's an issue with what you are using to edit the file.

[SmasherMaster]

Ok this is wierd, other usergroups can access the store but myself. (I put myself in a custom usergroup for super admins....) How do I enable it so custom usergroups can access the arcade?!

[Blackangel]

it's possible to get a price shop tax based on reputation, good reputation give a lower price, and bad reputation get a big price ... ?

[BarHopper]

Ok this is wierd, other usergroups can access the arcade but myself. (I put myself in a custom usergroup for super admins....) How do I enable it so custom usergroups can access the arcade?!

Am i missing something, but are you in the wrong thread?

I have a suggestion for 1.0. Have an ption to let certain forums, have a variable of how many points you get for replying/posting a new thread.

[Link14716]

it's possible to get a price shop tax based on reputation, good reputation give a lower price, and bad reputation get a big price ... ?
Not without using the promotions system. I'll put it in the suggestions box though. ;)

[Link14716]

Am i missing something, but are you in the wrong thread?

I have a suggestion for 1.0. Have an ption to let certain forums, have a variable of how many points you get for replying/posting a new thread.
Have you tried editing a forum? ;) The value for a forum is multiplied by the default value. Go ahead, try it out. ;)

[SmasherMaster]

AGH, I MEANT store....I was thinking about the Arcade. Sorry.

[Link14716]

Well, then we got to the bottom of your problem.

Run these two queries:
UPDATE utt_store_action SET allowedgroups='2,5,6,7,<customgroup>' WHERE shortname<>'admindonate';
UPDATE utt_store_action SET allowedgroups='6,<customgroup>' WHERE shortname='admindonate';

Then run ushop.php?rebuildds=1.

[NameWolf]

>If you know where the old poitns were stored or know the hack pm link and he can help.

Well the old points system was PetzVB however what I really want is for ushop to assign user points based on their post count. Is this possible ?

Thanks in advance.

NW

[Link14716]

Try this:
UPDATE user SET uttpoints=posts*20;
Change 20 to how many points per post they should recieve.

[Aleksey]

Is there like a fully working zip?

[GeekyDesigns]

Is there like a fully working zip?
The Zip in the first post should work fine, ive done 2 installs my self to other peoples sites that are working just fine

[Aleksey]

Thanks a lot got to go install it :)

[Flow Fusion]

I got errors accross the board. It seems the only place this hack works is in the admincp section. I don't think this works with the awards hack and arcade at all.

Parse error: parse error, expecting `')'' in /home/giftedso/public_html/gs/includes/init.php on line 487
Parsing functions.php Time before: 1082052136.22
Parse error: parse error in /home/giftedso/public_html/gs/includes/functions.php on line 786
Time after: 1082052136.22 Time taken: 0.0035080909729

Fatal error: Call to undefined function: is_browser() in /home/giftedso/public_html/gs/global.php on line 7

arse error: parse error, expecting `')'' in /home/giftedso/public_html/gs/includes/init.php on line 487

Parse error: parse error in /home/giftedso/public_html/gs/includes/functions.php on line 786

Fatal error: Call to undefined function: exec_nocache_headers() in /home/giftedso/public_html/gs/admincp/global.php on line 37

and these are just some of the errors.