iTrader v2.0.1

[ArchangelX]

Asked elsewhere but I might as well try here - I just installed photopost classifieds and would like to use iTrader instead of their built in feedback system.... any help on how to modify the profile page to show itrader info?

I'd appreciate this info as well. Thanks!

[Keyser S?ze]

isnt there a way to delete ratings & feedback?

[Shazz]

isnt there a way to delete ratings & feedback?

Yes, Usergroup options make sure to check that one

[joeyhavlock]

Can someone here confirm;

The latest version of this iTrader mod is still 2.0.1

and

That this version works for VB version 3.6.7

Appreciate it, and very much looking forward to using it if the above is true

All the best
Joey

[Shazz]

Can someone here confirm;

The latest version of this iTrader mod is still 2.0.1

and

That this version works for VB version 3.6.7

Appreciate it, and very much looking forward to using it if the above is true

All the best
Joey

Yes..:up:

[joeyhavlock]

Yes..:up:

Thanks Shazz! You and the folks in this forum really rock! This place seems to be packed full of all the info I need to manuever itrader into my system...much appreciation!
Joey

[0ptima]

I wonder when we will get an update on how development is going for the new version.....

[joeyhavlock]

Hi all,
Installed this mod with no problems whatsoever, it's awesome to say the least.

I was even able to add the code to my memberlist as well as a quick link to the member profile to show their rating.

I would like to have the entire feedback summary box on their profile instead of it just being a (0) link.

I have searched this forum for code to display the full feedback on their profile but cannot find anything, can someone shed some light?

Thanks
Joey

[Shazz]

Hi all,
Installed this mod with no problems whatsoever, it's awesome to say the least.

I was even able to add the code to my memberlist as well as a quick link to the member profile to show their rating.

I would like to have the entire feedback summary box on their profile instead of it just being a (0) link.

I have searched this forum for code to display the full feedback on their profile but cannot find anything, can someone shed some light?

Thanks
Joey


Thats a custom mod.

[joeyhavlock]

Thats a custom mod.

Does it still exist somewhere? I have seen it used on other boards

[Dannyloski]

Yeah, here's the link to it ... After you install it make sure you go to AdminCP > vBulletin Options > iTrader Settings > Show itrader stats in profile? > and select "Yes" ... By default its set to no ...

https://vborg.vbsupport.ru/showthread.php?t=107828

[Shazz]

Yeah, here's the link to it ... After you install it make sure you go to AdminCP > vBulletin Options > iTrader Settings > Show itrader stats in profile? > and select "Yes" ... By default its set to no ...

https://vborg.vbsupport.ru/showthread.php?t=107828

Yes, Thats it :)

[ezguy]

I have a valid vbulletin licence on vbulletin.com

I am not able to download the itrader zip file.

I dont understand how to do that.

can some one send a link to that

thanks

[Shazz]

I have a valid vbulletin licence on vbulletin.com

I am not able to download the itrader zip file.

I dont understand how to do that.

can some one send a link to that

thanks

Your showing up as licensed, just click the zip at the bottom of the post :)

[joeyhavlock]

Thanks Guys....I'm going to install it later today...you all rock!

[Shazz]

Thanks Guys....I'm going to install it later today...you all rock!

Be sure to run a full backup :)

[Digital Jedi]

Well, in spite of myself (made sure to upload all the folders and subfolders, and forgot the actual PHP files. DOH!), I managed to get this installed and running (at least on one skin, two more to go), and all the data transferred over just fine. Surprising, since I was on my demo forums and all my data isn't there, but...why question what works?

The only issue I ran into was when I added the code to the memberlist_resultbit template. Instead of a numerical link to the trader ratings, I just get empty parentheses (). Any idea what I did wrong? Perhaps my skin is messing with the code?

[ezguy]

thanks i was able to download it :)

[Eclipsed830]

Is there anyway to change it so instead of Site > Itrader it says like Site > Buyer/Seller Feedback?

(I think it might be on the nav bar)

[Eclipsed830]

Also how come the feedback score is staying at 0?

[Shazz]

Also how come the feedback score is staying at 0?

If you leave neutral feedback it will count as nothing

[redtaz]

Does this work on vbulletin 3.6.8?

[0ptima]

Does this work on vbulletin 3.6.8?
yes

[Shazz]

Does this work on vbulletin 3.6.8?

Smoothly :)

[MediaHound]

All I see admins currently having access to is editing and deleting feedbacks. I tried to search for it in this section but all the terms I searched came up with 0 results.

Yep same issue here, we need to edit scores left by people not just comments.
Any workaround aside from phpmyadmin?

[MediaHound]

Yep same issue here, we need to edit scores left by people not just comments.
Any workaround aside from phpmyadmin?

Well, I figured it out. I was looking to click the edit icons on the wrong page. On itrader.php, the edit icon is clickable. On itrader_detail.php (the one with the big edit button to edit comments) they are greyed out. This seems like it should be in the bug category.

Don't dig so deep into the feedback and you will see the edit icon appear and it will not be greyed out.

[MediaHound]

I made a little modification to mine that I thought I would share with you guys.

I changed the default text that goes out in the PM when a user has gotten a rating from another user.
I added to the bottom of the text a line suggesting they leave feedback for the other person if they have not yet done so, and with a link to do that. The link needed some modification to the script to work.

This is my NEW pm that goes out,

You have received a new rating or comment from so and so.
Details about this transaction can be found on this page (#).
If you have not done so yet, please reciprocate the feedback and leave feedback for so and so by clicking here (#).
Note: This is an automated message from the feedback system.


This was the OLD pm:
You have received a new rating or comment from so and so.
Details about this transaction can be found on this page (#).
Note: This is an automated message.

You can see the differences.
To construct the URL to leave feedback for the other person required some trickery.

Backup your itrader_feedback.php
Open up a new copy in your text editor,
Find, line 230:
$vbphrase['itrader_pm_message_x'] = construct_phrase($vbphrase['itrader_pm_message'], $vbulletin->userinfo['username'], $vbulletin->options['bburl'], $itrader['rateid'], $userinfo['userid']);


change to:
$vbphrase['itrader_pm_message_x'] = construct_phrase($vbphrase['itrader_pm_message'], $vbulletin->userinfo['username'], $vbulletin->options['bburl'], $itrader['rateid'], $userinfo['userid'], $vbulletin->userinfo['userid']);


Save and upload, careful to backup the file first.

Open your adminp and click to expand Languages & Phrases
search for your phrase itrader_pm_message by typing "received a new rating" in "Search for Text" and select 'iTrader" in "Phrase Type"
Click edit to edit your newly translated version, and this is the code you paste in there
You have received a new rating or comment from {1}.

Details about this transaction can be found on this page ({2}/itrader_detail.php?ir={3}&u={4}).

If you have not done so yet, please reciprocate the feedback and leave feedback for {1} by clicking here ({2}/itrader_feedback.php?u={5}).


Note: This is an automated message from the feedback system.


To test it out, I suggest using the Admin Log In As User mod found here (https://vborg.vbsupport.ru/showthread.php?t=122939).
Hope this helps somebody! Enjoy!

[pictureboarduk]

Anyone installed this on 3.6.8?

Does it work Ok?

Many thanks.

[0ptima]

Anyone installed this on 3.6.8?

Does it work Ok?

Many thanks.


I upgraded to 3.6.8 and it works fine.

[webfriend]

Sorry totally LOST!
But Now I'm Found.......Never Mind...Wow what a script, not just itrader, the hole vbulletin thing.
Nice job..
Thanks

[smp3000]

I installed this on my board but the permissions to grant to the usergroups is not showing up.

Help?

I've tried loading the xml product file a couple of times which didn't help.

[0ptima]

Its part of the vbulletin user group permission (at the bottom when editing a user group).

[smp3000]

Right, but I don't have anything under "Usergroup Options" that says anything about iTrade.

Here's a SS:

https://vborg.vbsupport.ru/external/2007/08/10.jpg

[Jerlene]

It should be the second box.

[Jerlene]

I upgraded to 3.6.8 and it works fine.

Did you have to do every step before running the upgrade file? How did you edit the template? I don't know how to use that code in the template. It keeps going on top of the postbit.

I tried to upgrade but I get this error:
Database error in vBulletin 3.6.8:

Invalid SQL:
INSERT INTO polasp11_itrader (userid, rateduserid, rating, buyselltrade, subject, dealurl, dateline)
SELECT userid, rateduser, userrating, userbuysell, usercomments, userurl, userdate FROM polasp11_user_rate_trade;

MySQL Error : Table 'polasp11_vb.polasp11_user_rate_trade' doesn't exist
Error Number : 1146
Date : Friday, August 17th 2007 @ 01:47:42 PM
Script : http://mysite.com/admincp/itrader_upgrade.php?do=stepone
Referrer : http://mysite.com/admincp/itrader_upgrade.php?do=stepone
IP Address : #########
Username : Jerlene
Classname : vb_database

[0ptima]

Right, but I don't have anything under "Usergroup Options" that says anything about iTrade.

Here's a SS:

http://www.triplebonline.com/images/vbss.jpg


I really dont know why....

[0ptima]

Did you have to do every step before running the upgrade file? How did you edit the template? I don't know how to use that code in the template. It keeps going on top of the postbit.

I tried to upgrade but I get this error:


When I upgraded to 3.6.8, I did not upgrade I trader. The error you are getting is due to a missing table.

[Shazz]

I would try re-installing it :|

[Keyser S?ze]

is there any way to specifically back the itrader data up? im going to use importx or whatever it is called to take my forums back to day 1 with all posts and data, but id hate to loose my itrader data

[Digital Jedi]

Anyone having the same trouble getting ratings to show in the Member List Templates? I still get "iTrader Rating ()" with no rating in the parentheses.

EDIT: Ain't it always the case when you bump something with a question you've been struggling with for weeks and then figure it out ten seconds later. I was trying to use postbit variables for to make it show in the memberlist_resultbit template. That's why it wasn't working. I changed $post to $userinfo and everything works fine now.

[LICryptkeeper]

Hi, I would like to modify this package in such a way that

1) the limit is no longer 80 characters. My programmer I'm sure can find this out right away, but are there any limits to making it longer then 80 characters?

2)more importantly, I need the rating to be a 5 star ranking, not a -1, 0, 1 array, users can rate that user, on 1- 5 and it will reflect in his overall ranking.

3)the url is autofilled: what code can I write in postbit so that a user can click to rate, and when it goes to the submission page, the url field is already filled out?

[Bieddos]

why is there a limit to Valid Forums Only???? I have more sale section.... how i can do?

[Shazz]

is there any way to specifically back the itrader data up? im going to use importx or whatever it is called to take my forums back to day 1 with all posts and data, but id hate to loose my itrader data

I think that ties in with the mysql info

[RollaJedi]

How exactly do you get the itrader ratings to appear in the members list anyways? Newbie lingo please. :)

[siliconfinance]

Can anyone tell me how to make the i-trader ratings to appear in my upgraded 3.6.8 version?

I had 3.5.x, upgraded, and now the trader ratings don't appear. Can anyone provide detailed instructions on what needs to be done to successfully migrate i-trader from 3.5.x to 3.6.8?

[masterweb]

Good job boy!, installed and working...

Thanks a lot:D

[thegtz]

I installed this on my board but the permissions to grant to the usergroups is not showing up.

Help?

I've tried loading the xml product file a couple of times which didn't help.

Go to Admin CP > Usergroups > Usergroups Manager > Click edit usergroup for Administrator > A window should say updating and when done it will take you to the updated list of permissions > Scroll down and look for iTrader and edit the settings > :D Save & Boom you should be able to view it now.

[siliconfinance]

Can anyone tell me how to make the i-trader ratings to appear in my upgraded 3.6.8 version?

I had 3.5.x, upgraded, and now the trader ratings don't appear. Can anyone provide detailed instructions on what needs to be done to successfully migrate i-trader from 3.5.x to 3.6.8?

Anyone pleasE?

[Spinball]

Anyone pleasE?

If you have installed a new version of vB and overwritten the template edits, then you just need to reapply the itrader hack. I have just upgraded to 3.6.8 and the itrader stuff seems to be working fine.

[mrcrx]

It loaded great and its working great. I do have 1 question. When I click a members name it shows there feedback on top but it doesnt show the actual posts below it. If I click the link to itrader from the postbit legacy it works perfect. How to I get the same info when I click the members name from the say the whats going on area. Thank you.

[ramchip]

I have Itrader running fine on my forum. In the members list I have created a new column for Itrader and this is also ok. Does anybody know what code I would need so that I can click the itrader heading in the member list to sort the list by itrader or is this not possible?

[SVTCobraLTD]

This work on 3.6.8?

SVT

[Smiry Kin's]

yep i use it over at http://www.resellerclubtalk.com

[Chris Etc]

Anyone know how I can query all of the trades rated in the past year by username?

[MediaHound]

I'd like to modify mine to show recent trader ratings given between all the members on my forum.
This way I can see how active the community is and who is rating who on a daily basis.

Has anyone done such a modification to theirs or would anyone be interested in banging it out?

[combs]

is there anyway to change the name of it from Itrader to something else? Also is there a way to eliminate the choose if ya were the buyer/seller whatever? I wanna use this as a rep like system because it's so detailed.

[Shazz]

is there anyway to change the name of it from Itrader to something else? Also is there a way to eliminate the choose if ya were the buyer/seller whatever? I wanna use this as a rep like system because it's so detailed.

Phrases? and also all the edits it tells you to do, find iTrader and replace it with what you want

[combs]

ah yes i'm dumb, easily changable to be named Rep instead of Itrader. I tried to change the were you a buyer/selller/trader to helper/help-e/neither but it screwed the whole page up and gave me an error...so i had to revert.

[lighter]

Hi there,

I've enable certain forum ids to allow itrader to be used by entering the ids into Valid Forums Only but it seems like users are still able to input ids which are outside of those, any idea why?

[forumrunt]

Wondering if it is possible to add options where there is seller,buyer,trade?

thanks

[IRCMedya]

Good, installed ;)

[Cyn]

We upgraded to vB 3.6.8 and after doing so are having an issue with iTrader. I assumed from the error message that we had overwritten a file or more so I downloaded iTrader and uploaded all the files. Still getting the same error, which is:

Warning: require_once(./includes/functions_itrader_main.php) [function.require-once]: failed to open stream: No such file or directory in /home/mother/public_html/discussions/itrader_main.php on line 42

Fatal error: require_once() [function.require]: Failed opening required './includes/functions_itrader_main.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/mother/public_html/discussions/itrader_main.php on line 42

I assume from that error message that the file functions_itrader_main.php is missing in the includes folder. However, there is no functions_itrader_main.php in the contents of the zip file I downloaded. We do have the file itrader_main.php in our discussions directory.

Am I not understanding the error message?

I also reinstalled the product, overwriting what we had in place, hoping that would resolve it but still the same issue.

Any advice?

Does anyone have functions_itrader_main.php in their includes folder? :)

[Cyn]

I'm guessing that functions_itrader_main.php is a file from the iTrader Extension mod that is now in the graveyard. I found the file in a backup folder, placed it, and all seems okay.

[Sc0rian]

you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.


when ever someone you try and access someones rating

[nickster]

How can I transfer iTrader feedback to another user?

[forumrunt]

is there a way to do mass feedbacks?

[Shazz]

How can I transfer iTrader feedback to another user?

That would be interesting to do, merging users to see how the iTrader merges

[ludachris]

Will there ever be a "main page" added to this hack, similar to the iTrader Extension hack here:
https://vborg.vbsupport.ru/showthread.php?t=108065

I'd like my users to be able to view all members of the site that have feedback in a list format. This way they can sort the best rated traders on our site.

[nickster]

Is there way to mass delete negative reps? Some stupid kid negative repped like 70 people on my site...

NVM: I found it in the db and deleted it.

[crest]

I installed it and it's working fine.

I like it under the avatar with the rest of the info.

But somehow I managed to add it here:

https://vborg.vbsupport.ru/

Outside the dark square, how can I remove it? I've been trying with no luck.

[Shazz]

I installed it and it's working fine.

I like it under the avatar with the rest of the info.

But somehow I managed to add it here:

http://img115.imageshack.us/img115/8873/picture5ze0.png

Outside the dark square, how can I remove it? I've been trying with no luck.

Seems like you have it placed twice, Remove the bottom one or paste your whole postbit_legacy on here.

[crest]

Thanks Shazz

I just found it.

[Shazz]

Thanks Shazz

I just found it.

Great!
:)

[mhackl]

Does anyone know how to automatically populate the "Deal thread URL:" with the url from the referring thread?

[RedWingFan]

I have encountered a hiccup a few times. We want to go in and edit a user's feedback comment (the public comment), but when we try to save the changes, we get an "Invalid deal URL" error message. And the URL is, indeed, correct. On the one I'm trying to edit now, there's something else odd: the deal URL has a suffix of ....&highlight=queen which means someone pasted that from a URL that came from search results. I tried saving the feedback both with and without the "&highlight=queen" but it still won't take. I hate to delete it and re-enter the feedback like last time, but we may have no choice.

[gabrielt]

Great system, loved it.

We had to make two major hacks though.

One was to hide buy/sell/other options as on our forums we only allow trades. This was easy to accomplish, just editing the templates and adding a hidden field on the form to specifiy that the transaction was a trade.

The second hack was a major one, though. itrader report system works by sending out an e-mail to all administrators and mods, however on our forums we had setup all alerts to be automatically posted on a special forum that is only available to the mods. Thus we will need to modify the system in order to make it work this way. After I modify itrader_report.php I will probably post it here so other people with a similar problem can enjoy this feature and maybe to the author to add this option on a future release.

Thanks
Gabriel

[hackspy679]

I wanted a direct link in the navbar, here is what I did.

<td class="vbmenu_control"><a href="itrader.php?$session[sessionurl]">iTrader</a>

Put it in this area in navbar template.

<!-- nav buttons bar -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="0" border="0" width="100%" align="center" style="border-top-width:0px">
<tr align="center">
<if condition="$show['member']">
<td class="vbmenu_control"><a href="usercp.php$session[sessionurl_q]">$vbphrase[user_cp]</a></td>
</if>
<if condition="$show['registerbutton']">
<td class="vbmenu_control"><a href="register.php$session[sessionurl_q]" rel="nofollow">$vbphrase[register]</a></td>
</if>
$template_hook[navbar_buttons_left]
<td class="vbmenu_control"><a href="faq.php$session[sessionurl_q]" accesskey="5">$vbphrase[faq]</a></td>
<td class="vbmenu_control"><a href="memberlist.php$session[sessionurl_q]">$vbphrase[members_list]</a></td>
<td class="vbmenu_control"><a href="calendar.php$session[sessionurl_q]">$vbphrase[calendar]</a></td>
<td class="vbmenu_control"><a href="itrader.php?$session[sessionurl]">iTrader</a>

If this is a repost please delete, I havent had time to read all 56 plus pages.

Thanks for a great product.

Hack

[AWJunkies]

Will this work for 3.6.8?

[Coleccromos]

As I can solve that for example an user in the total list has 40 votes and you enter in the profile and he has 60 or 80 votes.

[Rider69]

Will this work for 3.6.8?

I am curious about this as well.

[Shazz]

Read throughout a few pages back, Yes....

[Electric-Shadow]

Can we get a version that works with 3.6.8 please?

Thanks
ES

[Shazz]

Can we get a version that works with 3.6.8 please?

Thanks
ES

Read the post above yours!
And READ the first post of the release... :mad:

[Electric-Shadow]

*blushes* my apologies, I was going by the not supported sign.

[Electric-Shadow]

Installed, works great - made some changes to the phrases for it so i could use it with my site. Just got a question though, is the link which says iTrader2 when you view the feedback for someone allowed to be removed? or is it required?

[eoc_Jason]

Installed, works great - made some changes to the phrases for it so i could use it with my site. Just got a question though, is the link which says iTrader2 when you view the feedback for someone allowed to be removed? or is it required?

If you read the 'Read me first' html file in the download you would have seen the following (specifically the first paragraph):

Usage / Limitations / Liability:
The name "iTrader" and URL pointing to www.traderratings.com at the bottom of the iTrader pages MUST REMAIN UNCHANGED.

This add-on is provided free to any licensed vBulletin holder, if you do not have a legal vBulletin license then you should NOT be using this add-on! This add-on is provided "as is" without any warranty or support. In no event shall the author be liable for any damages as a result of using this add-on. Redistribution of this code (in part or whole) is strictly prohibited without the author's express written permission! An individual may modify this code for their own person use only. Distribution of this code (in partial or in whole) is strictly prohibited.

The only location where you should be downloading this file from is www.vBulletin.org

[Electric-Shadow]

i'm verry sorry, i feel soo silly now. don't worry i didnt remove the link, would never do that witout permision first.

works great on my site - thanks for such a sweet mod

[bosal]

is this using memcache ?
is this working with vb 3.6.8 ?

[DieselMinded]

is this working with vb 3.6.8 ?

YES

[bosal]

What about memcache ? i use it in on my vbulletin forum, becouse it's rl big community (100k registered users)

[RichTJ99]

I installed it and it's working fine.

I like it under the avatar with the rest of the info.

can anyone tell me how to make the iTrader info not show up in the postbit if the user has 0 feedback?

[DotSauce]

I am wondering if it would be possible to somehow manually edit a users iTrader rating?

Would this have to be done in the database?

Thanks!

[Shazz]

I am wondering if it would be possible to somehow manually edit a users iTrader rating?

Would this have to be done in the database?

Thanks!

Its the middle button below the options column on the iTrade page.

[DotSauce]

Its the middle button below the options column on the iTrade page.
Ok I see what you're talking about, but it doesn't really help with what I want to do.

I want to actually bump some users rating up many points... (I am verifying their rating from another domain industry forum). I am guessing this has to be done in the database somewhere. Is there any risk to doing this? or easy way about it?

[eoc_Jason]

It doesn't use memcache, there is no need to.

You can't simply change their score in the DB. It is re-calculated each time a rating is added / removed. You would have to physically add in ratings.

[SON240SX]

Ok so I have it installed, and everything is peachy.

But how can I go on the iTrader page and search for other users or list top rated users or things like that?

[Collectors]

Will iTrader work with vBulletin 3.7.0 (Beta 3)?

[RichTJ99]

can anyone tell me how to make the iTrader info not show up in the postbit if the user has 0 feedback?

anyone?

like here (http://www.plecofanatics.com/forum/)

[DotSauce]

I have posted a request for a modification of this iTrader plugin.
I want to manually adjust my users trader rating numbers.
It is a paid job if anybody is up for the task...

https://vborg.vbsupport.ru/showthread.php?t=165719

[siliconfinance]

DISCLAIMER: I am not a pro modder, but I figured out how to make this work on my 3.6.8 copy. Back up everything related to vb including files and database. Make these modifications at your own risk. NOTHING IS GUARANTEED.

With that said, I just upgraded my forum from 3.5.x to 3.6.8 and the following solution worked for so it should be a good solution for those with 3.6.8 that have no idea how to restore itrader functionality.

The reason it does not work is because somewhere in the upgrade to 3.6.8 the postbit_legacy and postbit templates are wiped and they lack the itrader template conditional which displays the itrader values for your members in the detail below their avatars.

Go to your admincp>>Styles & Templates>>Style Manager>>Find the template you wish to modify and click the "<< >>" which appears on the same line in the last column.

Scroll down to Postbit Template. Double click Postbit Template. If you use Postbit Legacy (check your vb options), then double click postbit_legacy, search for the line that contains an if condition for joindate, i.e. search for "joindate".

Hopefully that will lead you to this text:
<if condition="$post['joindate']"><div>$vbphrase[join_date]: $post[joindate]</div></if>


Paste this immediately after it:
<if condition="$post['userid']"><div>Trader Rating: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

Save and your trader ratings should now function in 3.6.8.

If you use the postbit template, you can follow the same steps for that template but I cannot guarantee you will get the placement you want.

[Howell]

I used

<if condition="$vboptions[itrader_profile] =='1'">

Rather than

<if condition="$post['userid']">

Then if you have the mod disabled it wont appear. ;)

[siliconfinance]

Told you I wasn't a pro modder! Sweet!!!

[kronnos]

I would just like to use the i-trader system forjust one of the forum that has to do with trading and for the otehrs i do not want it to show at all. How do i do that?

[zendiver]

Kronnos, go to your AdminCP->vBulletin Options->iTrader Settings

The last setting states the following:

Valid Forums Only
This is to only allow threads from certain forum sections. (i.e. your FS/WTB). Obviously "Strict URL Checking" has to be set to 'yes' for this to have any effect. If a thread does not match up with this list, then it is considered not valid. This should be a comma separated list of your forumid(s), ex: 1,2,3,4 otherwise leave it blank (no text) to disable this check.


This should get you going.

Howell, you have this working in vBulletin 3.6.8
<if condition="$vboptions[itrader_profile] == '1'">
<div>$vbphrase[trader_rating]: <b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b></div></if>

[kronnos]

I thought I will share this:
If you want to show iTrader in just some forums, use this code instead:


<if condition="$post['userid'] AND in_array($forum[forumid], array(3,43,23,9))"><div>iTrader Feedback(s): (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>


Note:
3,43,23,9 (coma separated) are sample forum IDs where you have to use your own, to find these IDs simply browse the forums you want to include and in the URL you see your_domain.com/forumdisplay.php?f=40 where 40 is the ID of this forum.

This is really great, just what I was looking for, in what and where in the template would I need to paste this code to work?

[kronnos]

Kronnos, go to your AdminCP->vBulletin Options->iTrader Settings

The last setting states the following:


This should get you going.

Oh, I have seen this option but I though it only let users use the URL's from the specific forums specified but is the Itrader only seen in these forums as well?

[zendiver]

That IS for your iTrader Ratings for specified forums.

[zendiver]

I used

<if condition="$vboptions[itrader_profile] =='1'">

Rather than

<if condition="$post['userid']">

Then if you have the mod disabled it wont appear. ;)

If you use the code you specified, it will ONLY show up if a member has only 1 iTrader rating (if at all - I tried yours and it wouldn't show up for anyone having a rating). If you want the information to show up in the postbit when they have a rating and NOT to show up when they don't have, then use the following:
<if condition="$post[itrader_total] != '0'">
<div>$vbphrase[trader_rating]: <b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b></div></if>

[kronnos]

Kronnos, go to your AdminCP->vBulletin Options->iTrader Settings

The last setting states the following:


This should get you going.

Howell, you have this working in vBulletin 3.6.8
<if condition="$vboptions[itrader_profile] == '1'">
<div>$vbphrase[trader_rating]: <b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b></div></if>

I would not need this code if I am using 3.6.7 right? So what code would I need to insert into my templates and where?

[zendiver]

kronnos,
Create a GLOBAL phrase variable "trader_rating" and give it the text "iTrader Rating" OR replace: $vbphrase[trader_rating]: with iTrader Rating: (either way will work)

In your postbit_legacy template:

FIND:
<!-- message -->

PASTE AFTER: (note x,x,x,x - these are your forum ID's)
<if condition="in_array($forum[forumid], array(X,X,X,X))">
<if condition="($post[itrader_total] == '0')">
<div style="text-align:center;font-weight:bold;color:grey;">This user has no <a href="$vboptions[bbdir]/itrader.php?$session[sessionurl_q]u=$post[userid]">trader rating</a> score. <a href="$vboptions[bbdir]/itrader_feedback.php?$session[sessionurl_q]u=$post[userid]">Leave Feedback</a></div><br />
<else />
<if condition="($post[itrader_total] < '0')">
<div style="text-align:center;font-weight:bold;color:red;">This user has a negative <a href="$vboptions[bbdir]/itrader.php?$session[sessionurl_q]u=$post[userid]">trader rating</a> score of $post[itrader_total]! <a href="$vboptions[bbdir]/itrader_feedback.php?$session[sessionurl_q]u=$post[userid]">Leave Feedback</a></div><br />
</if>
<else />
<div style="text-align:center;font-weight:bold;color:blue;">This user has a positive <a href="$vboptions[bbdir]/itrader.php?$session[sessionurl_q]u=$post[userid]">trader rating</a> score of $post[itrader_total]! <a href="$vboptions[bbdir]/itrader_feedback.php?$session[sessionurl_q]u=$post[userid]">Leave Feedback</a></div><br />
</if>
<else />
</if>
<else />
</if>
I just tested this on my test server and it worked just fine. Just make sure the put the forum id's you want this to show up in in place of the x's.

[kronnos]

Excellent! Everything works perfect, thank you.

[zendiver]

You are more than welcome. Happy Holidays!

[RichTJ99]

If you want the information to show up in the postbit when they have a rating and NOT to show up when they don't have, then use the following:
<if condition="$post[itrader_total] != '0'">
<div>$vbphrase[trader_rating]: <b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b></div></if>

thank you zendiver :up:

the only thing is, what I wind up with in the postbit is, for example is

:3

It's no big deal, I can just put iTrader in your above code, however I was wondering if I'm missing a variable or phrase or whatever? $vbphrase[trader_rating]:

[zendiver]

Yes, sorry about that. Create a GLOBAL phrase variable "trader_rating" and give it the text "iTrader Rating" OR replace: $vbphrase[trader_rating]: with iTrader Rating:

[Collectors]

Will iTrader work with vBulletin 3.7.0 (Beta 3..)?

Is iTrader tested on 3.7.0?

[Forum Lover]

Is iTrader tested on 3.7.0?

s..o..s... where is the author!!

[coolgus]

Hello
I've done some search in this thread but couldn't find anything about my problem. It seems that the iTrade Update Scores is not working on my site and there are different numbers between final feedback score and total ratings. For exampe a user may have 6 ratings positive and no negative and on the final feedback score it says 4.

Maybe there is a query I could try ... don't know really. Any ideas ?

[Shazz]

s..o..s... where is the author!!

He will get to it, be patient.

[xXTheOneRavenXx]

Noice mod Eoc_Jason

[econobarn]

Is iTrader tested on 3.7.0?

I'm using it...only problem I saw was it not displaying in the user profiles correctly (ie: no separate tab.)

[0ptima]

Hello
I've done some search in this thread but couldn't find anything about my problem. It seems that the iTrade Update Scores is not working on my site and there are different numbers between final feedback score and total ratings. For exampe a user may have 6 ratings positive and no negative and on the final feedback score it says 4.

Maybe there is a query I could try ... don't know really. Any ideas ?

How many unique ratings does the user have? 4?

[coolgus]

How many unique ratings does the user have? 4?

Hmm I see now 0ptima. So the feedback score counts only the feedback from unique users so it's not a matter of malfunction and I guess that this is for security reasons in order to prevent from virtual sells.

[SVTCobraLTD]

Hmm I see now 0ptima. So the feedback score counts only the feedback from unique users so it's not a matter of malfunction and I guess that this is for security reasons in order to prevent from virtual sells.

It is pretty much the same way eBay's is. Only counts unique feed backs. A few of my members contacted me and I have to explain that to them.

SVT

[Jdm Ej1 Coupe]

working on 3.7 B3 without a hitch! Thanks!!!

[FreeLunchRoom]

I'm using it...only problem I saw was it not displaying in the user profiles correctly (ie: no separate tab.)

i want to display the social networking profile...any ideas on how to fix it so it shows the correct profile?

[raaul]

this is not working with vBulletin? Version 3.6.8 :(
I installed it right and even read all setting , still can not see itrader setting in any user / admin profile

[pxd]

this is not working with vBulletin? Version 3.6.8 :(
I installed it right and even read all setting , still can not see itrader setting in any user / admin profile

You're doing something wrong as it worked perfectly on my 3.6.8 and still working nicely after upgrading to 3.7.0. Make sure you edit your forum templates for the itrader scores to show up as per instructions given.

[wouta]

Is there some who can tell me how i can print the total Positive and negative feedbacks ?

[elsparkodiablo]

I'm having a problem with my installation. It appears that when someone leaves multiple feedbacks for other people, there's a typo in the code for switching between pages, as seen here:

http://www.bladeforums.com/forums/itrader.php?u=117550&iv=4

http://www.bladeforums.com/forums/itrader.php?u=117550&v=4&pp=20&page= (whatever) is what shows up, but what should is
http://www.bladeforums.com/forums/itrader.php?u=117550&iv=4&pp=20&page=3

ie, u=117550&iv not u=117550&v

Where do I go to correct this?

[wouta]

I have found the follow in this trhead.

The phrase 'itrader_positive_feedback' is in the iTrader phrase group which probably isn't loaded. You can create one for whatever the member stuff is supposed to be on or in the GLOBAL group, or just don't use a phrase.



I have add in admincp a phrase:
admincp-> Languages & Phrases -> Phrase Manager -> Phrase type: global -> add new phrase

product: vBulletin (i have also tested itrader)
Varname: itrader_positive_feedback
Text: Shows itrader positive feedbacks

In my template i have add for testing: $GLOBAL[itrader_positive_members] and $vbphrase[itrader_positive_members]

I'm sure i do something wrong but what ?

[Digital Jedi]

I have found the follow in this trhead.



I have add in admincp a phrase:
admincp-> Languages & Phrases -> Phrase Manager -> Phrase type: global -> add new phrase

product: vBulletin (i have also tested itrader)
Varname: itrader_positive_feedback
Text: Shows itrader positive feedbacks

In my template i have add for testing: $GLOBAL[itrader_positive_members] and $vbphrase[itrader_positive_members]

I'm sure i do something wrong but what ?
Correct me if I'm misunderstanding you, but if your phrase is itrader_positive_feedback, the why are you using $vbphrase[itrader_positive_members] in your template?

[Daggerzz]

Help!

The instructions say to upload all files in upload file do i upload the file or open it and upload the contents

I also have this problem the instructions say to

Login to your admincp and enter the URL to the itrader_upgrade.php file. Follow the instructions carefully!

I put this in my browser url and i get back forum error

when i installed the upload file i opened it and uploaded the contents.

Thanks

[wouta]

Correct me if I'm misunderstanding you, but if your phrase is itrader_positive_feedback, the why are you using $vbphrase[itrader_positive_members] in your template?

The problem is that i not understand how its working that way i use $vbphrase[itrader_positive_members].

I have already seached for a example how i can add those things that i can use it on every page.

Mabey you can tell me how i can use those vars (are it realy vars ?) because i dont understand how its working....

[evilfud]

Cool mod. now if i can get to be like the trade manager im seeing at all the sports card forums.

Thanks

[jetstv]

i ahve mine installed and i want to say thankyou to the creater.
but nothing is coming up on my website

here my weblink www.usatuners.com

i put it on my nav bar and when i click it it say i do not have permission (i am the admin) so im really lost

the program is in my admin thing but its not workin on the page. I need help
some help me

[Digital Jedi]

i ahve mine installed and i want to say thankyou to the creater.
but nothing is coming up on my website

here my weblink www.usatuners.com (http://www.usatuners.com/)

i put it on my nav bar and when i click it it say i do not have permission (i am the admin) so im really lost

the program is in my admin thing but its not workin on the page. I need help
some help me

Do you have your iTrader turned on in the Admin CP?

The problem is that i not understand how its working that way i use $vbphrase.

I have already seached for a example how i can add those things that i can use it on every page.

Mabey you can tell me how i can use those vars (are it realy vars ?) because i dont understand how its working....

If you created a phrase like this:

Varname: itrader_positive_feedback
Text: Shows itrader positive feedbacks

Then anywhere you add [I]$vbphrase[itrader_positive_feedback], the text "Shows itrader postive feedbacks" will appear instead.

[Wassouf]

Hi, I have installed itrader properly, mods and users when going to http://www.iifree.net/forum/itrader.php they are seeing the message "The iTrader system is currently closed."

I have enabled usergroup permissions, now what to do?

Thanks in advance.
Wassouf

[Digital Jedi]

Hi, I have installed itrader properly, mods and users when going to http://www.iifree.net/forum/itrader.php they are seeing the message "The iTrader system is currently closed."

I have enabled usergroup permissions, now what to do?

Thanks in advance.
Wassouf
You probably have iTrader turned off. Go to your Bulletin Options in the Admin CP and turn iTrader on in your iTrader Settings.

[Daggerzz]

Is it possible to change the Classification of what a person was in the transaction for example in the leaving feedback page there is box that lets you say You were the Buyer Seller etc. Can I change the words buyer and seller to other names

[Dustin]

This works great! Thank you. :)

[nothing4me]

I have an idiot who rated himself 300 times. How can I delete all his ratings without doing it manually?

[Digital Jedi]

I have an idiot who rated himself 300 times. How can I delete all his ratings without doing it manually?
I don't think there is any other way but manually, unless there's a query you can run.

[nothing4me]

I don't think there is any other way but manually, unless there's a query you can run.Argh, do you know of it?

[RollaJedi]

easier solution: delete the idiot! :D

[nothing4me]

easier solution: delete the idiot! :DIt was an admin. He thought he found a glitch, but it was just an override...

[thenutthouse]

Has anyone tried this in vb 3.7 yet? Love the mod and fixing to upgrade to 3.7 and have a list of mods ready to do with it to give it a great new look. I would love to add this if it works with 3.7.

[DieselTruck]

Sorry for my stupidnesss !

I added the link in my template for it to show the itrader ratings on the members profile and the post colum. But, it only shows for me (Admin). When a new user registers it dosn't show no where on them.

I posted this:

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

in the MEMBERINFO templete and also the postbit legacy templete. Why is it only showing up for my Administrator?

Edit:

I think I see my problem. It says to remove conditional tags from the MEMBERINFO Templates..

How would i write that code without it?

[Digital Jedi]

Do you mean it only shows up in your profile and postbit, or do you mean your the only one who can see it? If it's the latter, you may have iTrader turned off.

[DieselTruck]

The Itrader isn't showing up in any profiles but the Administrators.

From the Instructions:
Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

Everything shows up in my post fine! For each member is works fine. Just nothing is showing up in the Profiles but the Admin's profiles.

[Shazz]

The Itrader isn't showing up in any profiles but the Administrators.

From the Instructions:
Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

Everything shows up in my post fine! For each member is works fine. Just nothing is showing up in the Profiles but the Admin's profiles.

Usergroup permissions?

[DieselTruck]

Usergroup permissions?

I figured it out. I was putting the code inside the area after the usergroups info. I moved it into the Forum info fields area and it works now!

[hrk]

Has anyone tried this in vb 3.7 yet? Love the mod and fixing to upgrade to 3.7 and have a list of mods ready to do with it to give it a great new look. I would love to add this if it works with 3.7.

https://vborg.vbsupport.ru/showpost.php?p=1416252&postcount=874

[indie2industry]

https://vborg.vbsupport.ru/showthread.php?t=168985

I love this so far :D

1 quick question for anybody who knows how.

I also have member index from this thread

https://vborg.vbsupport.ru/showthread.php?t=168985

Is there ANY WAY I can get the itrader ratings to show up in the member index location??
(in the bottom row like the skype, AIM, etc.)

this is what I have so far
http://www.indie2industry.com/forum/memberindex.php


This is where it is
https://vborg.vbsupport.ru/attachment.php?attachmentid=76147&d=1203340575

This is where I want to put it.
https://vborg.vbsupport.ru/attachment.php?attachmentid=76148&d=1203340575

[DieselTruck]

Any possible changes in the future updates as to getting a realtime feedback to this system?

[Scalemotorcars]

Installed on 3.6.8 and working perfectly. I did add the profile hack and moved the placement to the bottom of the profile. No problems at all thanks for the great mod. :up:

[DieselTruck]

Any possible changes in the future updates as to getting a realtime feedback to this system?
Possibly?

[nothing4me]

Possibly?Last Update: 19 Dec 2005
Developer Last Online: Dec 2007

I don't think so. :p

[Shazz]

If its reported working with 3.7
I don't see what jason would need to do

[DieselTruck]

If its reported working with 3.7
I don't see what jason would need to do

I was just hoping for a more "truthfull" way than just pasting the url. Its a great Mod for what it is though!!

[ctbo]

Any chance of getting this to send the negative and reported itraders to a forum like you can with reported posts?

Cheers

[dmark101]

i just updated my board to 3.6.8 and now the itrader rating is not showing in the postbit like it used to.

has anyone else had this particular problem? if so, let me know what to do. i've already tried the bitfield_itrader.xml file and it tells me "Invalid File Specified".

thanks.

[bulbasnore]

I think you have to re-edit the postbit template to include it.

[dmark101]

I think you have to re-edit the postbit template to include it.
hmm. that might be it. let me see if i can find that instruction page again........

[dmark101]

hmm. that might be it. let me see if i can find that instruction page again........
yup, had to edit a couple of templates and it shows up in the postbit like it's supposed to. thanks for the reminder bulbasnore. :)

[bigcurt]

https://vborg.vbsupport.ru/showthread.php?t=168985

I love this so far :D

1 quick question for anybody who knows how.

I also have member index from this thread

https://vborg.vbsupport.ru/showthread.php?t=168985

Is there ANY WAY I can get the itrader ratings to show up in the member index location??
(in the bottom row like the skype, AIM, etc.)

this is what I have so far
http://www.indie2industry.com/forum/memberindex.php


This is where it is
https://vborg.vbsupport.ru/attachment.php?attachmentid=76147&d=1203340575

This is where I want to put it.
https://vborg.vbsupport.ru/attachment.php?attachmentid=76148&d=1203340575

Not sure how that mod works but all you SHOULD have to do is add the template phrase ( the same one you have in your postbit template ) into your memberindex page where you like it.

[briansol]

i'm getting some wierd links on the Viewing of a feeback ( a link like itrader_detail.php?ir=123&u=123456)

this is the text of the link on the title. obviously, its wrong. Anyone else seeing this?
http://mydomain.com/*vbmenu_register(%22itrader_ext%22);%20feed%20back

[christian8a]

what will it take to add more options like:

Positive +
Neutral
Negative -
Outstanding++
Terrible--

Just to give me an Idea, because I have some other ideas there

[crucialjames]

Great Mod I'm running it fine on 3.6.8 without any errors. Crossing my fingers. I wanted to know when I added the link in postbit_legacy it gave the iTrader: (0) on every user on every forum would there be a way so only when Im in forumid 3 lets say it will show trader rating but when im in off topic forumid it will not show iTrader.

I read over 60 pages yesterday on this and i think it was mentioned but cant find it now.

[Debi]

I could use a little help (I'm completely new to vbulletin, go easy on me) I have uploaded the files in the upload folder, installed thru the plugin manager, but I do not get the option in usergroups to edit the itrader permissions. I can see itrader in my vbulletin options, it's just not there in my usergroups. Can someone give me a hard shove in the right direction to finish this install, please?
Thanks!

[Digital Jedi]

You might want to check to see if your FTP dropped any files while uploading. Meaning, reupload and check again, because they should be showing up there.

[Debi]

Ok, I unistalled, removed the files from the server, reloaded them, and it still didn't show in the usergroups settings. I gues my next step is to download the whole things again?

[Debi]

I had my other admin download it and try to install it. She got the same result as I did. It's not showing up in the Usergroup permissions.

[Shazz]

I had my other admin download it and try to install it. She got the same result as I did. It's not showing up in the Usergroup permissions.

Thats interesting. If you provide me your login details, I would like to take a look at that :o

[sunnylikbeckham]

when i click on it
it shows your group have no permission
??even if i m admin

[lifesourcerec]

I'm not sure why suspicious activity would still be emailed if you disable it. What is the exact reason it gives? I'll have to double check the code.


Yes, for some reason, you can't disable it. Even when it is set to no, it still sends them out.

[HP10T]

I installed this and everything seems to work great except that there is no link to "leave feedback" for anyone??

[Shazz]

I installed this and everything seems to work great except that there is no link to "leave feedback" for anyone??

They have to copy the thread URL

[DieselTruck]

I installed this and everything seems to work great except that there is no link to "leave feedback" for anyone??

I simply added a code to the Member info template. So, when users click the members profiles, they click Submit Feedback!

Screen Shot! :
https://vborg.vbsupport.ru/

Simply add this Code to the Memberinfo template:

Add:
<a href="itrader_feedback.php?$session[sessionurl]u=$userinfo[userid]"><b>$vbphrase[itrader_submit_feedback] $userinfo[username]</b></a>

After:
<div>Feedback: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

[HP10T]

I simply added a code to the Member info template. So, when users click the members profiles, they click Submit Feedback!

Screen Shot! :
http://i228.photobucket.com/albums/ee267/8100Power/feedback.jpg

Simply add this Code to the Memberinfo template:

Add:
<a href="itrader_feedback.php?$session[sessionurl]u=$userinfo[userid]"><b>$vbphrase[itrader_submit_feedback] $userinfo[username]</b></a>

After:
<div>Feedback: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

I couldn't find the first code to put the 'add' code in the memberinfo, I have no idea why and feel stupid :(

[sunnylikbeckham]

when i click on it
it shows your group have no permission
??even if i m admin

No Reply Yet In Best Forum Software

[DieselTruck]

I couldn't find the first code to put the 'add' code in the memberinfo, I have no idea why and feel stupid :(

Sorry. I modifed the first code for myself instead of using the orginal text.

This is the Orginal that you need to find:

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

Then you would add this:

<a href="itrader_feedback.php?$session[sessionurl]u=$userinfo[userid]"><b>$vbphrase[itrader_submit_feedback] $userinfo[username]</b></a>

Sorry for not being clear the first time!

[HP10T]

Sweet I couldn't find that first stuff again either but realized I never added it myself in the first place to the memberinfo and so that is why I was confused. I added both those codes and successfully added the submit feedback and feedback rating right above the referrals. Only thing i am wondering is where else you could post the submit feedback link to make it easier to get to.

[sunnylikbeckham]

I think I Should Remove It
As i Not Getting Help And Members In My Forum Start Asking Me ,Whats The Prob With It

[sunnylikbeckham]

solved now
anyway thanks

[DieselTruck]

Sweet I couldn't find that first stuff again either but realized I never added it myself in the first place to the memberinfo and so that is why I was confused. I added both those codes and successfully added the submit feedback and feedback rating right above the referrals. Only thing i am wondering is where else you could post the submit feedback link to make it easier to get to.


I was in that dilemma also. I found that the Profile was the closest and a easy access for members.

[peeceelee]

does anyone else have an issue in ie6 or ie7 when submitting feedback. the additional comments text area is only 1 or 2 characters wide. works fine in firefox.

*edit* in firefox the text area is normal sized, but none of the font, size, etc options are showing up

[Shazz]

does anyone else have an issue in ie6 or ie7 when submitting feedback. the additional comments text area is only 1 or 2 characters wide. works fine in firefox.

Haven't seen that problem in IE7 on any site of that sort

[peeceelee]

i have this on two separate sites and it works perfectly fine in one and i'm still having the issue with the other. does itrader use the same text editor or call the same functions as vbulletin? because the text editor loads up fine when posting and replying but it doesn't load correctly when submitting itrader feedback. any help would be appreciated...is there a certain plugin i need on my server? like htmlarea or something that could be missing?

Haven't seen that problem in IE7 on any site of that sort

[KeyHunterz]

I search the forums and saw that this question was asked a few times but no answer was given. Is it possible to manually give a user more then 1 rep at a time? No matter how crude the idea is I need to do this, so if you have any suggestion please reply.

[nothing4me]

How do I disable one person from giving a rating to someone else on his own IP? (To prevent false feedbacks.)

[netzrate]

Great Hack! Thank you, it runs without Problems on the Version 3.8.8 pl2!!

[larryd]

This may have been addressed but I'm not having any luck finding the answer. I've just upgraded from 3.0 to 3.6.8 and I upgraded to iTrader v2.0.1 and I'm now experiencing a problem.

When I click the itrader link I get the following error:

larryd, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.


You can see for yourself at http://www.newcelica.org/forums/traderratings.php?

I followed the uprade instructions step for step; please help ;)

[DieselTruck]

Make sure your set to view the Itrader Ratings under the Usergroup settings (Your Usergroup, Admin?) to yes.

[larryd]

That was a stupid mistake however it did not fix the problem. I have just enabled Can View and Can Rate for all user groups and I still can't access the Trader Ratings link on my nav bar.

http://www.newcelica.org/forums/traderratings.php?

[DieselTruck]

That was a stupid mistake however it did not fix the problem. I have just enabled Can View and Can Rate for all user groups and I still can't access the Trader Ratings link on my nav bar.

http://www.newcelica.org/forums/traderratings.php?


Maybe go over the installation again. Make sure the files are in the correct place..

Also. This may sound stupid, But... When I installed it. I didn't check the remember me button upon logging in. So I had to go in again to view it.

[larryd]

Maybe go over the installation again. Make sure the files are in the correct place..

Also. This may sound stupid, But... When I installed it. I didn't check the remember me button upon logging in. So I had to go in again to view it.

I just want to be careful not to lose the data from the previous installation. I have logged in and out several times and tried it under different logins though.

[magicman17]

is there anyway to get a leaderboard for itrader?

[netzrate]

Hello :)

Can i show the Trading Rate under the Username in the Threads with a link to the own Profile like ebay?

My User want a link ho they can see the trading from the User witch is from the Seller and Byers, like ebay ;)

Thank you for support!

Happy Eastern
Michael

[DieselTruck]

In your Postbit_Legacy Template...

Add this:

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

I put that in After this:

$template_hook[postbit_userinfo_right_after_posts]
<div style="padding:$stylevar[formspacer]px">

Also. Where the "Itrader_Total" is in red. If you change that to "itrader_pcnt", If will list a percent instead of how many feedback transactions the user has.

[tbrown7552]

is this 3.7 compliant?

[larryd]

OK I figured out what my problem was... When I upgraded my forums I had a direct link to trader ratings on my nav bar which just linked to traderratings.php which apparently has been changed for this version to itrader.php

now my question is simple. It looks like in the old version there was a main trader ratings page when you were not looking at someones ratings which could be accessed just by going to traderratings.php however when I try to go directly to itrader.php I'm getting my personal trader rating. Is there an equivalent in the new version.

NEW -> http://www.newcelica.org/forums/itrader.php?
OLD -> http://www.newcelica.org/forums3/traderratings.php?

Compare how the old one worked with the new one and let me know if the new one has the same option as the old?

[netzrate]

In your Postbit_Legacy Template...

Add this:

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

I put that in After this:

$template_hook[postbit_userinfo_right_after_posts]
<div style="padding:$stylevar[formspacer]px">

Also. Where the "Itrader_Total" is in red. If you change that to "itrader_pcnt", If will list a percent instead of how many feedback transactions the user has.


thank you very much :)
Great!!

[larryd]

Can anyone tell me if the new itrader has a default screen like the old one used to? When I browse directly to itrader.php I see my own information..

[Inferno Dragon]

is this 3.7 compliant?

yeah I have the same question, anyone tried this with the vb 3.7 version?

[Jase2]

I don't think it works correctly in the members profile.

I'm going to contact Jason and ask if whether I can modify it to work for my forums. If permission his given, (which I don't think so since he hasn't been active for a while) then I will release it, or I'll team up with Jason and take future requests ect. Likewise, I sent him a PM.

Regards Jason :)

[DieselTruck]

I don't think it works correctly in the members profile.

I'm going to contact Jason and ask if whether I can modify it to work for my forums. If permission his given, (which I don't think so since he hasn't been active for a while) then I will release it, or I'll team up with Jason and take future requests ect. Likewise, I sent him a PM.

Regards Jason :)

If you plan on modifying this. Are you also going to take other suggestions that was directed to Jason a while back?

[larryd]

I really thought my question was simple.. anyone running this can tell me if it has a default page like the old version did or not?

[Shazz]

I really thought my question was simple.. anyone running this can tell me if it has a default page like the old version did or not?

Whats the old version?

[vithorius]

Hi everybody!

I need some help on installation. I run a portuguese (http://www.bateristaspt.com) drummers forum and I'm having some difficulties on the 3rd step of installation:
[3. Edit all the usergroup permissions (all groups default to no access).]

I just don't know were will I edit all those usergroup permissions... What must I search for...?

I made the first two steps: 1. Upload and 2. Install iTrader Product via Plugin Manager using the provided XML file, and it was just OK!

Please, could someone help me? I know this must be such a lame/beginners question, but I just don't know were will I do this...

(I believe that this could be a portuguese/english translation problem as my english is not that much good on technical stuff... I already went from top to bottom in the AdminCP and found just nothing where I could edit, or just click relating to iTrader and usergroup permissions...)


My board uses vB 3.6.8 with the default theme.


Thank you so much!

King regards and greetings from Portugal (http://en.wikipedia.org/wiki/Portugal),

Vithorius

[christian8a]

This was a nice hack, too bad is not supported anymore.

Most of it works still, but some stuff is gone so I wouldnt install it or upgrade if you already have been using one version

[vithorius]

Please, could someone help me? I know this must be such a lame/beginners question, but I just don't know were will I do this...

(I believe that this could be a portuguese/english translation problem as my english is not that much good on technical stuff... I already went from top to bottom in the AdminCP and found just nothing where I could edit, or just click relating to iTrader and usergroup permissions...)


This was a nice hack, too bad is not supported anymore.
Not supported anymore...?!? How come that...?

This must be one of the best mods on vBulletin...!

Is there any other mod similar to this one?


P.S. - I still need help for my question here: https://vborg.vbsupport.ru/external/2011/11/11.gif (https://vborg.vbsupport.ru/showthread.php?p=1476628#post1476628) ... Someone, please...?

[vithorius]

I could use a little help (I'm completely new to vbulletin, go easy on me) I have uploaded the files in the upload folder, installed thru the plugin manager, but I do not get the option in usergroups to edit the itrader permissions. I can see itrader in my vbulletin options, it's just not there in my usergroups. Can someone give me a hard shove in the right direction to finish this install, please?
Thanks!
Just the same problem as me...!

I just can't find this option in usergroups to edit the itrader permissions.

I can see itrader in my vbulletin options, it's just not there in my usergroups.


I guess that the documentation for us newbies is just too short... HELP PLEASE! :eek:

[Jase2]

What version of vB are you running?

I was going to take over this hack; but I can't release an updated version since the original coder hasn't replied to my PM.

Regards Jason :)

[vithorius]

What version of vB are you running?

I was going to take over this hack; but I can't release an updated version since the original coder hasn't replied to my PM.
I'm using version 3.6.8

Could you please just help me on this option in usergroups to edit the itrader permissions?

I can see itrader in my vbulletin options, it's just not there in my usergroups.

Thank you so very much! :up:

[sdebank]

Activated it on 3.7 and it appears fine. It would be fabulous if it could be better integrated into the profile.

[0ptima]

I really thought my question was simple.. anyone running this can tell me if it has a default page like the old version did or not?

NO. There was a hack for it, but was removed due to a security exploit. The author was working on an update and will probably release it when 3.7 comes out.

[SEOvB]

installed and working fine on 3.7RC1

thanks!

[larryd]

Whats the old version?

NEW -> http://www.newcelica.org/forums/itrader.php?
OLD -> http://www.newcelica.org/forums3/traderratings.php?

You can see the difference, the old version had a main screen which showed the overall trader statistics whereas the new one shows your individual statistics.

[vithorius]

I'm using version 3.6.8

Could you please just help me on this option in usergroups to edit the itrader permissions?

I can see itrader in my vbulletin options, it's just not there in my usergroups.

Ok! I already installed it on my forum, and it is working just fine... The problem was ME (newbie on vB... :rolleyes: )


P.S. - A note to this Mod: SWEET...!!!! :cool: :up:

[Shazz]

NEW -> http://www.newcelica.org/forums/itrader.php?
OLD -> http://www.newcelica.org/forums3/traderratings.php?

You can see the difference, the old version had a main screen which showed the overall trader statistics whereas the new one shows your individual statistics.

That is pretty nice :)

[stryka]

you should just join his forum http://forums.extremeoverclocking.com/ and contact him there directly... someone must know him there..

What version of vB are you running?

I was going to take over this hack; but I can't release an updated version since the original coder hasn't replied to my PM.

Regards Jason :)

[Jase2]

Yes, I'll be contacting him shortly.

Regards Jason :)

[Jase2]

What exactly doesn't work on this for 3.7? I'm going to be working on it.

[KeyHunterz]

Wow.... so the support on this mod is almost completely dead. The coder seems non-existant and there hasn't been any updates/features for a few years now... Are there any better mods then this one?

[Shazz]

Wow.... so the support on this mod is almost completely dead. The coder seems non-existant and there hasn't been any updates/features for a few years now... Are there any better mods then this one?

Not for this catagory...
Hes on every now and then :)

[vithorius]

Wow.... so the support on this mod is almost completely dead. The coder seems non-existant and there hasn't been any updates/features for a few years now... Are there any better mods then this one?
Well... That is my problem too... This is just one of the best mods EVER for vBulletin...!

If possible, maybe someone else could lead this Mod from now on? (I believe that the author permission is needed)

:confused: :erm: :(

[bigcurt]

I hate ungrateful little pricks...anyone else?

[Shazz]

I hate ungrateful little pricks...anyone else?

I wouldn't call them that but somethin similar :o

[christian8a]

The supporter is extremelly busy or had a problem on his personal life, he did a great job with this so I dont think is nice to insult him.

But the support is needed :erm:
I hope somebody could help him or take his place (with his permission of course)

[Jase2]

Like I said, I'd be happy to continue this for future versions, as I'll be using it on my site. However, I cannot release a version for 3.7, then take requests for new features without the permission of the original coder.

[Shazz]

Like I said, I'd be happy to continue this for future versions, as I'll be using it on my site. However, I cannot release a version for 3.7, then take requests for new features without the permission of the original coder.

Yup, which is hard to go through of jason dosen't sign on much :|

[MikeWarner]

What exactly doesn't work on this for 3.7? I'm going to be working on it.Anyone? I'll be upgrading to 3.7 as soon as it goes Gold and iTrader is the only thing I have worries over at the moment - my users use is a lot! Thanks.

[bigcurt]

I am confused though..what support is needed? An upgrade to 3.7? Don't upgrade your forum so darn quick..simple as that.

I hope Jason does know that there are plenty of people ( including myself ) who would pay premium prices for a possible "gold" version of this mod.

[MikeWarner]

I certainly would pay for it. From what I can tell though, this should work fine on 3.7 anyway. Can anyone back this up?

[DieselTruck]

Im running 3.7 RC 2 on my Test Site. So far so good!

[Spinball]

Just to chip in, this is one of the most important mods we have. I would also chip in some $ to maintain or enhance it where needed.

[NTMID8]

Forgive me if this has already been asked but I haven't been able to look through ALL of the pages of this thread.

In the Marketplace section of my forums I already had a sub-forum called Buyer & Seller Feedback. Since my users were already familiar with going to this location, I wanted to change the forum to a direct link to itrader_feedback.php. It works fine for the admins, but no one else even though their permissions are set vie the iTrader settings in the individual usergroups.

I'm guessing that linking directly is bypassing a check somewhere and the admins just override that? Can anyone help me get this link functioning properly?

[Jase2]

Tested and seems to be working fine on 3.7.

I'll try contacting the orginal coder today, then if he gives me permission -- I'll release for 3.7, as well as taking requests for new features. :)

[MikeWarner]

Nice one Jase. No new features really needed though - although integration into the new profile layout would be good, maybe give it a tab of it's own on the main profile page.

[Spinball]

Tested and seems to be working fine on 3.7.

I'll try contacting the orginal coder today, then if he gives me permission -- I'll release for 3.7, as well as taking requests for new features. :)

Awesome. I think a rebuttal system would be good. Basically the closer you can get ot to ebay the better.

[Demo16]

I got vb 3.6.9 but when I go to plugin manager and I import bitfield_itrader.xml or cpnav_itrader.xml I got this answer: Invalid File Specified

Any help?

[Digital Jedi]

Those XMLs are part of the Upload folder, to be added to your site. Your not supposed to import those. Your supposed to import the file in the Product XML folder.

[wd4x4]

Tested and seems to be working fine on 3.7.

I'll try contacting the orginal coder today, then if he gives me permission -- I'll release for 3.7, as well as taking requests for new features. :)


Cool :D TIA :up:

[Demo16]

Those XMLs are part of the Upload folder, to be added to your site. Your not supposed to import those. Your supposed to import the file in the Product XML folder.

:p I didn't unzip all files sorry.
Now I got one problem at this point:

Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.

I can't find them :confused:

[Digital Jedi]

:p I didn't unzip all files sorry.
Now I got one problem at this point:

Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.

I can't find them :confused:
It should be there in Admin CP >>> Usergroup Permissions >>> (Select a Usergroup) >>> iTrader Permissions

[Demo16]

Done and mark as installed on VB 3.9! Works great!
There's a way to make it multilanguage?

[mawby]

I'll try contacting the orginal coder today, then if he gives me permission -- I'll release for 3.7, as well as taking requests for new features. :)Did you manage to get permission from the author?

[Dannyloski]

Still working on vB 3.6.10 and its not affected by the New Security Token feature :up:

[briansol]

anyone get the memberinfo addon count working in 3.7 rc4?


<div class="fieldset">
<div style="padding:$stylevar[formspacer]px">
iTrader: <strong><a href="itrader.php?$session[sessionurl]u=$post[userid]" rel="nofollow">$post[itrader_total]</a></strong> / $post[itrader_pcnt]%
</div>
</div>


seems $post var's aren't available in the new blocks[] array

[dabollicks]

It would be awesome if this could be updated for 3.7.x