Quick Reply Box

[David_McPherson]

Ya did it!! :)

Nice job buddy!!!

[Boofo]

Great! Enjoy! ;)

[David_McPherson]

I will thanks. :)

[legendarysk8er]

Wtf, I've tried thsi twice now, everything I do correctly, but it just doesn't show up.

[mute]

meh, i wanted the smilies on my showthread with the quick reply box, but those bastards are really resource intensive! :(

[bexie]

It went to the top rather than the bottom for me. As nice as it is, it's rather...inconvienent to be at the top. Why is it at the top, when it said it'd be at the bottom?

[SatMan2028]

Works great just installed it! No problems! Thanks!

[Reoplex]

hello :)

i just installed it, but the box wont show up.

I went over the steps again, and i checked everything and it still wont show up.

i read all i could before posting, so any help is appriciated :)

thanks.

[dantech30]

FF,

This may have been asked already, but how do I get the reply box to show up at the bottom instead of the top? I would like it to be like on here at the bottom. Going through pages and pages and couldn't find this question, so I thought I would ask.

BTW - Very nice - I have seen this used at some of the other boards I visit and it is very conveint - I am sure my users will like this one.

Thanks

dantech30

[Reoplex]

you probably didnt read to carefully ;)

https://vborg.vbsupport.ru/showthread.php?s=&threadid=34597&perpage=15&display=&pagenumber=37

the answer it almost at the bottom of the page.

[dantech30]

Thanks - it works now - I must have skipped over that one

[legendarysk8er]

Ok, This hack still hasn't worked for me three times now. I'm just going to use that older one instead because this one is ++++ing me off.

[Boofo]

What older one?

[legendarysk8er]

Some quick reply this one dude made. I personally think FireFly's is better, but oh well..

[legendarysk8er]

Nevermind, my problem was that I was uploading showthread.php right after I got done editing it. Finally!

/me clicks install.

[Boofo]

Glad you got it working. ;)

[gmarik]

/me wanders: can anybody make it just the way vB3 has?

[Theutus]

Some people were asking for instructions on how to place an image in the background of the quick-reply box.... You just add a line in the showthread_replybox style in the textarea for "message" like so:

<td><textarea name="message" style=" color: #CCCCCC;background-color: #021124; background-image: url('http://www.csfgames.com/forum/images/quick_rep_final.gif'); background-repeat: no-repeat; background-attachment: fixed;" rows="7" cols="$textareacols" wrap="virtual" tabindex="1"></textarea>

Notice how i did change the background color, and the text color also. Keep in mind if you do this, and you change your txt color to fit the background image... Make sure you change the background color also, because in Netscape the background image doesn't show up. And if your colors don't work together, you could have a white text on a white background, and people couldn't see their text! :)

You can see an example of this on my forum here:

http://www.csfgames.com/forum

Enjoy! Hope you guys are enjoying the script as much as me!

[Boofo]

I couldn't see it. Do you have to register first?

[Theutus]

Doh, didn't think about that.... Heres an attached screenshot of it in action.....

[Boofo]

That looks great! If I could only come up with something like that, I'd be all set. ;)

[GameZilla]

vBulletin Message
No thread specified. If you followed a valid link, please notify the webmaster

mine keeps saying that whedn i try to reply using it
help plz

[Infopro]

Here's how ours came out. :)
http://infoprosjoint.net/fun/IJQR+.gif

[MacMorag]

I have installed Firefly's Quick Reply Box hack - excellent hack.

In addition, I have enabled in-line thread-rating (by copying the contents of $newreply_ratethread and pasting them into $showthread_replybox) so that a thread can be rated as it is being replied to via the Quick Reply Box.

This works fine for registered users. The average rating is amended accordingly.

However, when an unregistered user rates a thread via the QRB there is no change to the average rating (rating by unreg members cast via the standard 'rate this thread' box work ok and the average is amended - so it doesn't look like it's a permissions problem).

I've checked all user/forum permissions, and all is as it should be - although I'm sure that it must have something to do with permissions.

I'm at a loss to find out why registered members can rate a thread while replying via the QRB, and unregistered members cannot.

Any hints? Thanks.

[pride7]

Planning to make a separate thing for paying members. Can this be restricted to only be allowed for a certain user group?

Thanks,

Hans

[Jcaputo]

I keep getting a No thread specified error when I hit the button to quick post. Any help is greatly appreciated!

[silverlex02]

Never mind I got it to work. This is the first hack I ever tried.

[[email protected] vbmenu_register("postmenu_408729", true);]

Is there a way to stretch the box out just alittle farther to the right? Thanks in advance.

[Sabrina]

Does this hack work with 2.3.0 ?

[Infopro]

Yes.

[tmapm]

I've done this hack and it works perfectly. However when I checked back on my board it says this error:

Warning: SAFE MODE Restriction in effect. The script whose uid is 511 is not allowed to access /proc/loadavg owned by uid 0 in /home/virtual/site9/fst/var/www/html/forum/global.php on line 194

Warning: fopen("/proc/loadavg", "r") - Success in /home/virtual/site9/fst/var/www/html/forum/global.php on line 194

Warning: fclose(): supplied argument is not a valid File-Handle resource in /home/virtual/site9/fst/var/www/html/forum/global.php on line 196

Warning: Cannot add header information - headers already sent by (output started at /home/virtual/site9/fst/var/www/html/forum/global.php:194) in /home/virtual/site9/fst/var/www/html/forum/admin/functions.php on line 1652

I tried uninstalling it but it is still there. Any ideas?

[Sabrina]

well i installed it on 2.3.0 and the window was on top of the thread, and aslo, i tried to post and it didnt post at all.

[tmapm]

It is at the top of the thread because you didnt put it down far enough. There are two instances of <!-- first unread and next/prev -->. Look for the one near the bottom.

<!-- first unread and next/prev -->

<!--spacer-->

[Sabrina]

Today at 02:31 PM tmapm said this in Post #1033 (https://vborg.vbsupport.ru/showthread.php?postid=408998#post408998)
It is at the top of the thread because you didnt put it down far enough. There are two instances of <!-- first unread and next/prev -->. Look for the one near the bottom.

<!-- first unread and next/prev -->

<!--spacer-->

Ok it went to the bottom thanks..


Still have the problem that its not posting, i click reply and it takes me to a "page cannot be found"

?

[tmapm]

I searched further back in the thread and read this about your problem.

Nombsaid this:
Either turn on file_uploads on your webserver or remove the enctype from the <form> tag to avoid this.

P.S. I fixed my MYSQL errors. It had to do with another hack when I set my NIX to anything but 0.

[Joel Llewellyn]

hey, i love the shoutbox and have been using it ever since it came out, but now for my new forums, vb 2.30, i installed it and everything works great cept for 1 thing, whenever someone posts in it, the posts count 27 times and it crashes my forum till 10 minutes.. does anyone know what the problem is?:(

[Sabrina]

I removed the enctype from form and still is not posting.

anyone can help?

my problem is that i have 2.3 and when i type in the box and hit reply, it takes me to a "not found" page......

[S.Shady]

Today at 09:45 AM Joel Llewellyn said this in Post #1036 (https://vborg.vbsupport.ru/showthread.php?postid=409227#post409227)
hey, i love the shoutbox and have been using it ever since it came out, but now for my new forums, vb 2.30, i installed it and everything works great cept for 1 thing, whenever someone posts in it, the posts count 27 times and it crashes my forum till 10 minutes.. does anyone know what the problem is?:(


rehack it. it works fine on 2.3.0

also are you talking about the quick reply or anouther hack.

the qrb (quick reply Box) works perfectly on 2.3.0

[Joel Llewellyn]

hehe, i posted in wrong post, i was talkin about the shoutbox, but maybe u could help me! cuz u receive no help in vb shoutbox thread >:O

[voclain]

I've just installed the upgrade to 2.3.0

I've noticed that in this hack, the first insturctions says:

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}

That last part:

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}

IS not in the Showthread.php

so...BEFORE I make a mistake...I figured I would ask....do I just ignore it?? OR do I do something else???

Kirk

[gldtn]

Today at 12:44 AM voclain said this in Post #1040 (https://vborg.vbsupport.ru/showthread.php?postid=411257#post411257)
I've just installed the upgrade to 2.3.0

I've noticed that in this hack, the first insturctions says:



That last part:



IS not in the Showthread.php

so...BEFORE I make a mistake...I figured I would ask....do I just ignore it?? OR do I do something else???

Kirk

Same here, I drop by to ask the same thing, so I'll wait untill they answer it.

Thanks

[voclain]

IT appears that I had my BRAIN on BACKWARDS last night...GUESS it was the 1:30 AM problem...the brain just does not think well with NO SLEEP....

Got up this AM....and BINGO...found the EXACT CODES I could not find....IT is there.......and now...all is working again......

To....NEVER MIND......

ONE GOOD thing came from this...I found the following:

1. The SEARCH BOX at the bottom works REALLY GOOD....
2. MOST all question related to this HACK are discussed about 10 times each in this thread.
3. IT's the best thing ever invented...well next to Fried Chicken.
4. There are a TON of modifications to this HACK that I did not know about.....
5. Looks like I'm going to have to read the whole 70 pages.
6. THANK YOU!!!

Kirk Voclain

[gldtn]

Hmm. I guess I gotta look thru it carefully. Thanks for pointing that out voclain.

gl

[ptbyjason]

I don't know what my problem is. I totally uninstalled this hack and then went back and reinstalled it. I took my file off of the server again just to see if it overwrote the previous file and it did. I have done everything that I can think of to do and it still doesn't work. In fact I can't get my other hacks to work since I undated to VB 2.3.0 This is very odd. If I ever figure it out I will post it, even if it is embarrasing. But if anyone has a hint, I would love to hear it. My quick reply box isn't even showing up.

[Sabrina]

yep, same here, vB2.3.0 and this hack doesnt work, it will not post, it takes you to a NOT FOUND page..

[mute]

Working just fine over here on 2.3.0..

[SloppyGoat]

Me too. Running fine on 2.3.0.

[Buczilla]

I have a question... I added a new style based on my template with the quick reply installed. I added a new replacement set, to be able to change the colors logo, etc. However, I only have one template... which this style uses. However, the quick reply box doesn't show up. Any suggestions?

[GXON.matt]

IS there anyway a table with smilies could be added? also I have 'now playing' hack could that also be added to the quick reply box?

[sangam]

how can i make it appear at the bottom not at the top?

Thanks

[sangam]

how can i make it appear at the bottom not at the top?

Thanks

[minder]

cool hack thanks

[chad]

sweet hack.
/me hits install.

[Buczilla]

sangam... make sure you insert the $quickreplybox or whatever it is in the right spot. I think there is two places (where it says insert after) put it after the second one :)

[DelFDgfd_gT]

03-19-03 at 01:40 AM Boofo said this in Post #887 (https://vborg.vbsupport.ru/showthread.php?postid=368880#post368880)
Come on, guys, the answer has been in the thread for a while now. The search box at the bottom really works. ;)

Just add this where you want it in the replybox:

<tr>
<td bgcolor="#1C5780" valign="top"><normalfont><b>Attach file:</b></normalfont><br>
<smallfont>Maximum size: $maxattachsize bytes</smallfont></td>
<td bgcolor="#1C5780" valign="top"><smallfont><input type="hidden" name="MAX_FILE_SIZE" value="$maxattachsize_temp">
<input type="file" class="bginput" name="attachment"><br>
Valid file extensions: $attachextensions</smallfont></td>
</tr></table>

I tried fixing it up a bit to make it look better.....

Put:

<table width="100%">
<tr>
<td bgcolor="#1C5780" valign="top"><normalfont><b>Attach file:</b></normalfont><br>
<smallfont>Maximum size: $maxattachsize bytes</smallfont>
</td>
<td bgcolor="#1C5780" valign="top"><smallfont>
<input type="hidden" name="MAX_FILE_SIZE" value="$maxattachsize_temp">
<input type="file" class="" name="attachment">
<br>
Valid file extensions: $attachextensions</smallfont></td>
</tr>
</table>


Below:


<tr valign="top">
<td>
<textarea name="message" rows="7" cols="$textareacols" wrap="virtual" tabindex="1"></textarea><br>
<smallfont><a href="javascript:checklength(document.vbform);">[check message length]</a></smallfont></td>

[DelFDgfd_gT]

03-25-03 at 12:35 AM Snapperhaed said this in Post #896 (https://vborg.vbsupport.ru/showthread.php?postid=372654#post372654)
After reading ALL 60 pages, <YAWN> I still cant find the answer im looking for ... Some say it works on 2.3.0 some say 2.3.3 ...

I am running v2.3 #3 and it is NOT working.

Installed the code, exactly as stated in the 1ST thread of this god forsakenly long thread. The original hack. No add ons, no modifications, just straight up, give me a box.

Thru the hoops and the hurdles, I get NO error messages, yet I also get NO quick reply box. Not on top, on bottom, not in the middle, no where.

Any help/assistance in this matter would be appreciated!!

Edit: After pulling hair out, I found the problem. Seems the ftp server wasnt overwriting the old file. Check that! Also, in the template 'showthread' the orginal hack gives old code (obvious for an older version)...

Look for THIS in v2.3 #3

<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="95%" align="center">
<tr>
<td><smallfont>$pagenav&nbsp;</smallfont></td>
<td align="right"><smallfont>
<img src="https://vborg.vbsupport.ru/images/prev.gif" alt="" border="0">
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextnewest">Next Thread</a>
<img src="https://vborg.vbsupport.ru/images/next.gif" alt="" border="0">
</smallfont></td>
</tr>
</table>
<!-- first unread and next/prev -->
$replybox

^^^ Add the reply box as stated above.

Thanks for the great hack. Im going to pluck my eyes out and soak them now. Ay carumba!


replace with ( i think):


$replybox
<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="95%" align="center">
<tr>
<td><smallfont>$pagenav&nbsp;</smallfont></td>
<td align="right"><smallfont>
<img src="https://vborg.vbsupport.ru/images/prev.gif" alt="" border="0">
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextnewest">Next Thread</a>
<img src="https://vborg.vbsupport.ru/images/next.gif" alt="" border="0">
</smallfont></td>
</tr>
</table>
<!-- first unread and next/prev -->

[TheCaver]

I had this installed and working for months, now I migrated to another server and it gives "no thread specified" messages....

Everything else works fine, can reply the normal way, the thread ID is making it into the hidden elements......Just explodes when it hits newreply.php

I even reinstalled the hack.....

:disappointed:

Thanks for any help!

JC

[Genocide]

Nice, thanks!

[proxyMX]

not working for me, no reply box at the bottom of my threads :(

[DemonJester]

Any idea why the "Mark Forum Read" is not working since I installed this hack? It works if I do "Mark All Forums Read" from the main index page but not from within the forum itself?

I looked to see what may have caused this but I have no clue what I am really looking for??

Any assistance would be appreciated.

BTW this and the quick quote II hack are the only hacks I have on this board.

[Mutt]

It's off, I can't believe it took me this long to install this. I never really saw the point, but it's really nice. thanks firefly.

Anyway, I wanted some smilies but hated the idea of loading the 2 vbcode js files just for smile insertion. It seemed like alot to add to every single page. plus, I didn't like how the smile box looked. I did it a little differently and thought maybe you guys would want it.

If you want to add smilies, you don't need to edit any files, just change your showthread_replybox template to this one. It doesn't require any js files at all. I already added the necessary js. (very short) there isn't any getclickysmiles needed to be added either. I manually put a small collection of smiles in the template. They are the default smiles that came with vb. You could always edit the template to change the smiles. Instead of them being in a box to the side, they are lined up under the message box next to the check message legth link.

:)

[proxyMX]

i got it working
damn templates are so confuldinges sumtimes

[CronoXClone]

I haven't got it working. I'm not sure how to Upload it or what to do. Same with my avatar's they keep coming up as X's in the box when i upload them.

Someone told me that i need to have FTP address.
I dled the program but (Leapware) but im not sure how to connect or something. Can someone please help. Either post here or

Msn-CronoClone88@hotmail.com
Aim-CronoClone88

Very much appreciated.

[larryd]

I have had this installed for quite a while and well thanks, the hack rocks.

I have a question now and Ive read 20 pages of this thread without an answer. I want to add a close post after quick reply option which I saw this posted earlier.

**

Add <input type="checkbox" name="closethread" value="yes"> to the box, then if you check that box the thread will be closed.
To only show this to mods requires more hacking, so take a look at the code for that hack and apply it here.

**

Can anyone tell me how to only apply this to mods, s mods, and admins?

[Rusche]

Wow wee!

[Rusche]

/me has intalled quite a while now

[Ghetto]

I use Quick Reply on every vb forum i make

Awsome hack! 10/10

[romeshomey]

My Box hasnt shown up. Any help?

I followed the directions very carefully..

[romeshomey]

Ok, got it, but 1 question. Why do I have a reply box on the top and bottom of my forum?

hehe

HELP :)

http://www.romesleague.com/forums

[romeshomey]

I FIXED IT.. THANKS

The problem was, the person who set up my initial forum already had a '$replybox' in the code before the place it was supposed to go.

[AmericanWoman]

I have searched this thread and the ENTIRE vB forum for the "Quick Thread" hack that I KNOW exists because it's referred to elsewhere...but I cannot find it. :( It's an easy one, and I could just write it, but I know it's already DONE somewhere.

Can you tell I'm frustrated?

Fantastic hack, btw, Firefly. :D

[ogden2k]

Doesn't work with vb 2.3.2?

[assassingod]

Virtually any hack will work with 2.x

[ogden2k]

1. In showthread.php find this bit of code:
// ##################################################
if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}
That doesnt come up in the new showthread file.

[assassingod]

IIRC they removed something to do with page numbers. I am guessing If you just search for those 3 top lines, and follow the instructions as normal, it'll work fine.

[movielist]

edit: got it to work with 2.3.2


*** FIND ***

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}

*** REPLACE WITH ***

if (!$getperms['canviewothers'] and $thread['postuserid']!=$bbuserinfo['userid']) {
show_nopermission();
}

if (($bbuserinfo['userid']!=$thread['postuserid']) and (!$getperms['canviewothers'] or !$getperms['canreplyothers'])) {
$replybox='';
} elseif (!$getperms['canview'] or (!$getperms['canreplyown'] and $bbuserinfo['userid']==$thread['postuserid'])) {
$replybox='';
} elseif (!$thread['open'] and !ismoderator($thread['forumid'],'canopenclose')) {
$replybox='';
} else {
$textareacols = gettextareawidth();
eval("\$replybox = \"".gettemplate('showthread_replybox')."\";");
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}

[tmapm]

First of all I run boards at version 2.3.0. I have [AddOn] Useful Additions For Quickreply (and normal reply page) -- https://vborg.vbsupport.ru/showthread.php?s=&threadid=47918 installed. My problem is when the double posting is prevented via the Doublepost Guard -- http://www.vbulletin.org/hacks/index.php?action=showhack&threadid=40145 and merges the posts, it doesn't allow for the additions (except sticky) included in the Useful Additions For Quickreply to update. I was wondering if someone could take a look at the Useful Addition for Quickreply hack and help me out by adding some queries in the Double Posting Hack to update the quickreply options. I've looked through the files and I haven't been able to figure it out. Any help is appreciated.

[MrNase]

Hey movielist! Thx a lot :)
I didn't work for me and i got nervous but now it works :)
thx :)

[MaDCaT75]

I got vB 2.3.0 and I did everything right and my quick reply box wont show up!?

[kimbers]

08-08-03 at 08:57 PM ogden2k said this in Post #1072 (https://vborg.vbsupport.ru/showthread.php?postid=424450#post424450)
Doesn't work with vb 2.3.2?


Yep, this hack works with 2.3.2!!!

Very awesome hack. Had to make a couple of adjusments to fit my taste but I'm just picky like that! :p

Very awesome hack thought! Great Job!!

[MaDCaT75]

Yesterday at 07:49 AM MaDCaT75 said this in Post #1079 (https://vborg.vbsupport.ru/showthread.php?postid=424770#post424770)
I got vB 2.3.0 and I did everything right and my quick reply box wont show up!?

[Angelus1753]

The hack won't install for version 2.3.2

I can find these lines of code:

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

But the ones after this I can't:

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}

They apparantly don't exist in showthread.php for vbulletin 2.3.2 :(

[[BA]Techie]

Techie]I have version 2.3.0 and I get this error when I try to go to a post.

Parse error: parse error, unexpected $ in /home/cncb/public_html/showthread.php on line 516

[Salari]

I hgave 2.3.0 and works perfect

[[BA]Techie]

I got it to work but I searched this thread and I could find no answer as to how to fix it because the quickreply is on top of the page ?

[Oblivion Knight]

Today at 03:39 PM Angelus1753 said this in Post #1082 (https://vborg.vbsupport.ru/showthread.php?postid=425171#post425171)
They apparantly don't exist in showthread.php for vbulletin 2.3.2 :( This was fixed here (https://vborg.vbsupport.ru/showthread.php?postid=424513#post424513).

[MaDCaT75]

Yesterday at 07:49 AM MaDCaT75 said this in Post #1079 (https://vborg.vbsupport.ru/showthread.php?postid=424770#post424770)
I got vB 2.3.0 and I did everything right and my quick reply box wont show up!?

[mcyates]

01-29-02 at 07:59 PM FireFly said this in Post #21 (https://vborg.vbsupport.ru/showthread.php?postid=216685#post216685)
JTMON - Add this line:
$clickysmilies = getclickysmilies();
to showthread.php right after this:
$textareacols = gettextareawidth();
then use $clickysmilies in the showthread_quickreply template to add the box with the smilies in it, but you will also need to add these two lines:
<script language="Javascript" src="vbcode.js"></script>
<script language="Javascript" src="vbcode_language.js"></script>
to the template right after the <form> tag. That should work. :)

Wow this is even handier than I thought... :D


I've done that. When i click on a smile it sends me back to the top of the page and it does not insert it into the box?

[Bergman]

04-02-02 at 08:28 AM boatdesign said this in Post #259 (https://vborg.vbsupport.ru/showthread.php?postid=235513#post235513)
OK - it was easier than I thought.

Just add

} elseif ($bbuserinfo['usergroupid']=="1") {
$replybox='';
in the list of conditionals to not show the reply box to guests.

Now the only thing I can't figure out is how to only show the reply box if:
1.) it is the last page of a multipage thread, or
2.) it is a single page thread.

I can use
} elseif ($pagenumber!="1") {
$replybox='';

for example to not show it on page 1 but to show it on page 2.

I see above there is this conditional statement:
if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {

Which I thought I would be able to easily adapt, but I can't seem to make it work.

Can anyone give me a hand?

Great ! That one solved my problems with not registred users. :)

[Cal Poly Forum]

Hmmm.. maybe the author or someone can edit the download text so that it is compatible with 2.3.2.

[mcyates]

yes that would be a good idea!!! I have 2.3.2 and it does not work (well the smiles anyway)

[asasi]

I have VB 2.2.9 ... what is this error?:

Parse error: parse error in /home/ziafatco/public_html/forums/showthread.php on line 3

please help me please please please ...

[j0ncc]

nice hack :):)

[AmericanWoman]

OK, I've got nothing showing up. Nada. Zilch. I've tried to put debugging into the if..else statements to see which one it's getting hung up on, but not catching ANY of them. :(

I think I need to just give up and go home.

[seanf]

Thank you for this

Sean :)

[Xyphen]

Upgraded to vb2.3.2 and installed quick reply successfully once again!

[MaDCaT75]

Too bad I cant get this to work :cry:

It doesnt show up and I got 2.3.0 :cry:

But the other version of this hack worked fine :p

[memobug]

I understand it might not work, but how could it not show up? That part is just a template modification!

Regards,

Matt

[JeffyJoe]

08-17-03 at 10:12 AM Cal Poly Forum said this in Post #1090 (https://vborg.vbsupport.ru/showthread.php?postid=426559#post426559)
Hmmm.. maybe the author or someone can edit the download text so that it is compatible with 2.3.2.


Here ya go.


This is for VBulletin version 2.3.2 only
(I have not tested it with 2.3.0)

[MaDCaT75]

Yesterday at 09:02 AM memobug said this in Post #1098 (https://vborg.vbsupport.ru/showthread.php?postid=427568#post427568)
I understand it might not work, but how could it not show up? That part is just a template modification!

Regards,

Matt

I dunno I followed the instructions to the letter and the box wont show up in the threads :ermm:

[[BA]Techie]

I want to know if this can be installed fresh on vB 3.00 beta 5 . My friend has it installed on beta 5 but i really dont know how to install it from scratch on beta 5 since the code is different . Any help is appreciated

[SVTBlackLight01]

Quick reply is a standard feature of vB 3.

[Cal Poly Forum]

08-21-03 at 11:50 PM JeffyJoe said this in Post #1099 (https://vborg.vbsupport.ru/showthread.php?postid=427832#post427832)
Here ya go.


This is for VBulletin version 2.3.2 only
(I have not tested it with 2.3.0)


Thanks.
I am almost finished with the hack but ... I can't seem to find "showthread_replybox" anywhere?
Is there one? I am using 2.3.2.

edit: I found it on the text , on the first page. :bunny:

[Cal Poly Forum]

08-21-03 at 11:50 PM JeffyJoe said this in Post #1099 (https://vborg.vbsupport.ru/showthread.php?postid=427832#post427832)
Here ya go.


This is for VBulletin version 2.3.2 only
(I have not tested it with 2.3.0)


eval("standardredirect(\"".gettemplate("redirect_postthanks")."\",\"$goto\");");

This code is not present in Step 4 of newthread.php

[memobug]

08-22-03 at 08:22 AM MaDCaT75 said this in Post #1100 (https://vborg.vbsupport.ru/showthread.php?postid=427836#post427836)
I dunno I followed the instructions to the letter and the box wont show up in the threads :ermm:

Getting the box to show is a template mod, so maybe you inserted the right variable in the wrong template, or in the middle of a <!-- comment --> or the wrong variable.

It should be inserted in the showthread template, reading something like:

<!-- START SHOWREPLYBOX HACK -->
$replybox
<!-- END SHOW REPLYBOX HACK -->

And located, in my forum immediately after

<!-- first unread and next/prev -->

If it isn't coming up for you, you can try replacing the word $replybox with a tag line like:

GOSH DARN I CAN'T TELL WHY THIS BOX DOESN'T SHOW

And if you don't see that, well you are tweaking the wrong template or template set.

If you do see it, maybe you didn't create the showthread_replybox template properly or have a typo in one of the names somewhere.

Good luck!

Matt

[Michael]

Is there a version out there for 2.3.2 ?

[MaDCaT75]

Yesterday at 11:48 AM memobug said this in Post #1105 (https://vborg.vbsupport.ru/showthread.php?postid=428498#post428498)
Getting the box to show is a template mod, so maybe you inserted the right variable in the wrong template, or in the middle of a <!-- comment --> or the wrong variable.

It should be inserted in the showthread template, reading something like:

<!-- START SHOWREPLYBOX HACK -->
$replybox
<!-- END SHOW REPLYBOX HACK -->

And located, in my forum immediately after

<!-- first unread and next/prev -->

If it isn't coming up for you, you can try replacing the word $replybox with a tag line like:

GOSH DARN I CAN'T TELL WHY THIS BOX DOESN'T SHOW

And if you don't see that, well you are tweaking the wrong template or template set.

If you do see it, maybe you didn't create the showthread_replybox template properly or have a typo in one of the names somewhere.

Good luck!

Matt

Nope I did it right..... I had 4 admins check the code even.... it just didnt show up... besides the other version of this hack was much easier to install :rolleyes:

[Cal Poly Forum]

Yesterday at 06:27 PM Michael said this in Post #1106 (https://vborg.vbsupport.ru/showthread.php?postid=428652#post428652)
Is there a version out there for 2.3.2 ?


JeffyJoe (above) released the hack for version 2.3.2 but the codes could not found in certain steps. :ogre:

[EVO VIII Chris]

Yesterday at 01:58 AM Cal Poly Forum said this in Post #1104 (https://vborg.vbsupport.ru/showthread.php?postid=428449#post428449)
eval("standardredirect(\"".gettemplate("redirect_postthanks")."\",\"$goto\");");

This code is not present in Step 4 of newthread.php

Yes it is, check line 255 and you should see it. I see it just fine.

[99SIVTEC]

Today at 07:13 AM MaDCaT75 said this in Post #1107 (https://vborg.vbsupport.ru/showthread.php?postid=428676#post428676)
Nope I did it right..... I had 4 admins check the code even.... it just didnt show up... besides the other version of this hack was much easier to install :rolleyes:

Same thing is happening with me. I've installed this hack on other vb versions probably 20 or 30 times. The darn thing just isn't showing up on my forums.

Why were there so many more file edits for this version?

[Cal Poly Forum]

I mean in newreply.php.


It isn't there. If any finds it, please direct me. Middle of the hack.



EDIT: I just realized that I have done that hack, where it deletes the "thanks for posting- redirecting" , therefore the eval("standardredirect(\"".gettemplate("redirect_postthanks")."\",\"$goto\");"); is deleted.

How would these work then?

[Cal Poly Forum]

I've uploaded the old files just so that I can do this hack.
In the end, the reply box did not show up either.

[Megadeuce]

Hello,
I installed the hack but I noticed that it only works for forums with the default style. All forums with the custom styles don't have the quick reply box.

[99SIVTEC]

you need to make sure you add the $replybox variable to all of your custom styles as well.

[memobug]

Yesterday at 07:13 AM MaDCaT75 said this in Post #1107 (https://vborg.vbsupport.ru/showthread.php?postid=428676#post428676)
Nope I did it right..... I had 4 admins check the code even.... it just didnt show up... besides the other version of this hack was much easier to install :rolleyes:

I understand your frustration, but I still think if you are interested in debugging this, you should go about it systematically, rather than throw up your hands and say it doesn't work. Of course you could always use another hack if that is preferable.

If you do want to figure out what's wrong...

First step would be to plug a text placeholder into the showthreads template, as recommended earlier, and make sure you can see it where you want the replybox to appear.

Next step, if that works okay is to see if it can pull in that $replybox template. If not there is a template problem, or maybe your version of vB is overwriting the $replybox somehow.

I think they had a three or four guys checking the Hubble mirror specs before it went up, too. They were probably rocket scientists transferred over from Space Shuttle O-ring duty.

Regards,

Matt

[Dodger21]

08-22-03 at 07:50 AM JeffyJoe said this in Post #1099 (https://vborg.vbsupport.ru/showthread.php?postid=427832#post427832)
Here ya go.


This is for VBulletin version 2.3.2 only
(I have not tested it with 2.3.0)



I tried this, it worked fine, but the freakin quickreply box is surrounded by a very neon green box. Its very difficult to look at.

[EVO VIII Chris]

That means you forgot to remove the spaces in front of all the variables in the code. Make sure you do it as it mentions in the install directions. I gaurantee that will fix it.

[Dodger21]

Which variables? I followed exactly like the instructions and its still green. Arg!

[MaDCaT75]

Yesterday at 01:34 AM memobug said this in Post #1115 (https://vborg.vbsupport.ru/showthread.php?postid=428874#post428874)
I understand your frustration, but I still think if you are interested in debugging this, you should go about it systematically, rather than throw up your hands and say it doesn't work. Of course you could always use another hack if that is preferable.

If you do want to figure out what's wrong...

First step would be to plug a text placeholder into the showthreads template, as recommended earlier, and make sure you can see it where you want the replybox to appear.

Next step, if that works okay is to see if it can pull in that $replybox template. If not there is a template problem, or maybe your version of vB is overwriting the $replybox somehow.

I think they had a three or four guys checking the Hubble mirror specs before it went up, too. They were probably rocket scientists transferred over from Space Shuttle O-ring duty.

Regards,

Matt

What does it matter anyways? I got the origional version of this hack installed on my forum instead of Chen's.... I dont see the difference why I would have to go thru all that trouble.

[Cal Poly Forum]

Can you guys post your username if you have successfully installed the hack on version 2.3.2, using JeffyJoe's code ( https://vborg.vbsupport.ru/showthread.php?s=&threadid=34597&perpage=15&display=&pagenumber=74 )?


I want to know who completed the mod and who didn't.

[99SIVTEC]

I finally got this to work with 2.3.2 . The problem is that the instructions for showthread.php are wrong, or at least they were for my site.



*** FIND ***

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

*** REPLACE WITH ******

if (!$getperms['canviewothers'] and $thread['postuserid']!=$bbuserinfo['userid']) {
show_nopermission();
}


*** FIND ***

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}

*** REPLACE WITH ***


if (($bbuserinfo['userid']!=$thread['postuserid']) and (!$getperms['canviewothers'] or !$getperms['canreplyothers'])) {
$replybox='';
} elseif (!$getperms['canview'] or (!$getperms['canreplyown'] and $bbuserinfo['userid']==$thread['postuserid'])) {
$replybox='';
} elseif (!$thread['open'] and !ismoderator($thread['forumid'],'canopenclose')) {
$replybox='';
} else {
$textareacols = gettextareawidth();
eval("\$replybox = \"".gettemplate('showthread_replybox')."\";");
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}



and then it works. In the instructions they have the top two finds as one. Problem is there is a bunch of code between them.

[Cal Poly Forum]

Got it. I'll try it out.

[99SIVTEC]

I used jeffyJoe's version of the hack found on page 74 and just replaced the step 2 file edit of showthread.php with the one I posted above.

[Cal Poly Forum]

The code is not there for newreply.php Step 4.

This is for ver 2.3.2. HOw did you get yours to work?

[teamsupra]

Ive tried JeffyJoe's code and the Quick Reply was there fine, but the CLose Open Button is missing.. Any Ideas?

[HaVeNita]

Version 2.3.2 didn't work!
someone can post a new .txt with the correct Instructions?

[|oR|Greg]

Thanks Jeff...good rehack :) Now I just gotta re-add the smilies somehow.. :P

[|oR|Greg]

Got the smilies in... happy day :)

[|oR|Greg]

Anyone know how to make the smilies box so it uses the same formatting as the actual one in a new reply? I used the same $vbcode_smilies line as the newreply.php, and it displays the box, but without the proper border on the table, odd... ?

www.OrderOfRonin.com

[JeffyJoe]

08-29-03 at 12:06 AM 99SIVTEC said this in Post #1121 (https://vborg.vbsupport.ru/showthread.php?postid=429301#post429301)
I finally got this to work with 2.3.2 . The problem is that the instructions for showthread.php are wrong, or at least they were for my site.



*** FIND ***

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

*** REPLACE WITH ******

if (!$getperms['canviewothers'] and $thread['postuserid']!=$bbuserinfo['userid']) {
show_nopermission();
}


*** FIND ***

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}

*** REPLACE WITH ***


if (($bbuserinfo['userid']!=$thread['postuserid']) and (!$getperms['canviewothers'] or !$getperms['canreplyothers'])) {
$replybox='';
} elseif (!$getperms['canview'] or (!$getperms['canreplyown'] and $bbuserinfo['userid']==$thread['postuserid'])) {
$replybox='';
} elseif (!$thread['open'] and !ismoderator($thread['forumid'],'canopenclose')) {
$replybox='';
} else {
$textareacols = gettextareawidth();
eval("\$replybox = \"".gettemplate('showthread_replybox')."\";");
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}



and then it works. In the instructions they have the top two finds as one. Problem is there is a bunch of code between them.


the problem is this line:
if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

is found twice in showthread.php

the second instance of this line in showthread has this line:

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}


so the instruction code is correct... there should be no code between them... and there should be only one instance of this code in showthread.php

[MaDCaT75]

I still dont see the difference between this one and the origional one :ermm:

[mfacer]

i've installed this hack... its great!! all my members love it...

however, I dont know if I've done anything wrong... but it doesnt seem to stop flooding?

I have set the flood time limit to 15 seconds, but people are posting seconds after another post (same user) using the quick reply....

any thoughts?!

thanks v much! :nervous:

[MaDCaT75]

Question: How do I put "e-mail notify" and "thread subscription" check boxes into the quick reply area?

[assassingod]

Today at 12:55 AM MaDCaT75 said this in Post #1133 (https://vborg.vbsupport.ru/showthread.php?postid=430546#post430546)
Question: How do I put "e-mail notify" and "thread subscription" check boxes into the quick reply area?

I believe it's been released as a hack

[MaDCaT75]

I dont have firefly's version I have the mist hackless version and no matter what I do I cant get the smilie box to show!

[psoexplorer]

Hello. I installed this hack (jeffrey's remix) (which is VERYYYY NICE! (i hit the install button :)) Anyways, it all went smoothly, but i do not have an open close button. How do i fix that?

[MaDCaT75]

hey can someone tell me how to add the [img], [b], [i], and those buttons to the side of my quick reply?

http://www.sims2forums.com/quickreply.jpg

[Gary King]

Today at 02:34 AM MaDCaT75 said this in Post #1137 (https://vborg.vbsupport.ru/showthread.php?postid=431907#post431907)
hey can someone tell me how to add the [img], [b], [i], and those buttons to the side of my quick reply?

http://www.sims2forums.com/quickreply.jpg

What's the attached image for?

[MaDCaT75]

I dont understand your question. :confused:

[Gary King]

Oh nevermind, I thought the link you posted was a link to someone else's quick reply with the [b], [i], etc. buttons you wanted and thought you made a mistake.

[MaDCaT75]

No I posted a screenshot of what my quick reply looks like and I jus wanted the [b], [i], [u], [img] tag stuff on the right side.... and I cant figure out how to put it all in there :confused:

[Gary King]

I know, I understand now.

[blakkboy]

im getting this error after trying to view a thread

Parse error: parse error in /home/blakkboy/public_html/forum/showthread.php on line 94

[MaDCaT75]

I'd go back and check over the code and make sure you did it right.

[blakkboy]

ill do that...... i need a good editor though, wordpad doesnt do the job

[Gary King]

Download a trial version of a better text editor that has line numbering :)

[MaDCaT75]

Today at 12:04 AM Gary W said this in Post #1146 (https://vborg.vbsupport.ru/showthread.php?postid=432117#post432117)
Download a trial version of a better text editor that has line numbering :)


yup yup :p

[blakkboy]

ok now i got the problem where its not showing at all...??

[MaDCaT75]

Do like I did..... install the mist hackless quick reply in template modification section on this forum

https://vborg.vbsupport.ru/showthread.php?s=&threadid=56834

[blakkboy]

thanx

but now its at the top.......???

[Blindchild02]

just change where the $replybox is... you dont have to follow the template directions exactly, you're allowed to edit stuff :p

[MaDCaT75]

Today at 02:57 AM blakkboy said this in Post #1150 (https://vborg.vbsupport.ru/showthread.php?postid=432141#post432141)
thanx

but now its at the top.......???


you add it after the 4th uhm..... whatever it says :tired:

[blakkboy]

cool

[MaDCaT75]

Good boy :p

If you wanna know how to add the smilie box... PM me

[Hogwarts]

Hello, I insatlled the Store back before I started to work on this, and I can't find what it asks to find in showthread. if I was to post my showthread.php could someone edit it, and reupload it, to help me out? or post instructions to how to do it? thanks.

- Hogwarts

[blakkboy]

now i cant get it to show im runing 2.3.2 and ive read of all the instructions carefully and it wont show

[MaDCaT75]

crap...... i moved my vb code button part above the smilie box now half the buttons dont work lol :cry:

[Gary King]

Today at 12:32 AM blakkboy said this in Post #1156 (https://vborg.vbsupport.ru/showthread.php?postid=432480#post432480)
now i cant get it to show im runing 2.3.0 and ive read of all the instructions carefully and it wont show

??

[blakkboy]

i wish someone could help me with this hack

[calorie]

The vB 2.3.2 quickreplybox_v11.txt download from post #1099 produces a slight
JavaScript error. The attached has a fix.

Also, if you want to get this:

[check message length] [ ] Subscribe to Thread? [ ] Use Signature? Go

to appear below the vB 2.3.2 Quick Reply box, it is also included in the attached.

[calorie]

Screenshot of the following from attachment in post #1160:

[check message length] [ ] Subscribe to Thread? [ ] Use Signature? Go

[blakkboy]

Today at 04:28 PM calorie said this in Post #1160 (https://vborg.vbsupport.ru/showthread.php?postid=432557#post432557)
The vB 2.3.2 quickreplybox_v11.txt download from post #1099 produces a slight
JavaScript error. The attached has a fix.

Also, if you want to get this:

[check message length] [ ] Subscribe to Thread? [ ] Use Signature? Go

to appear below the vB 2.3.2 Quick Reply box, it is also included in the attached.

i did exactly what u said and i still dont get the freakin replybox

[calorie]

Have you added the replybox variable, like so, to the showthread template?

<!-- first unread and next/prev -->
$replybox
<!-- /spacer -->

[blakkboy]

yeap i have and still nothing

[calorie]

What do you see when you view the HTML source - where the replybox is supposed to be on the showthread.php page? Also, just in case, the replybox only shows when you are logged into your board.

[blakkboy]

{htmldoctype}
<html>
<head><title>$bbtitle - $thread[title]</title>
$headinclude
<script language="javascript" type="text/javascript">
<!--
function aimwindow(aimid) {
window.open("member.php?s=$session[sessionhash]&action=aimmessage&aim="+aimid,"_blank","toolbar=no,location=no,menubar=no,scrollbars=no,wi dth=175,height=275,resizeable=yes,status=no")


}
var postmaxchars = $postmaxchars;
function validate(theform) {
if (theform.message.value=="") {
alert("Please complete the message field.");
return false; }
if (postmaxchars != 0) {
if (theform.message.value.length > $postmaxchars) {
alert("Your message is too long.\n\nReduce your message to $postmaxchars characters.\nIt is currently "+theform.message.value.length+" characters long.");
return false; }
else { return true; }
} else { return true; }
}
function checklength(theform) {
if (postmaxchars != 0) { message = "\nThe maximum permitted length is $postmaxchars characters."; }
else { message = ""; }
alert("Your message is "+theform.message.value.length+" characters long."+message);
}
// -->
</script>
</head>
<body>
$header

<!-- breadcrumb, nav links -->
<table cellpadding="2" cellspacing="0" border="0" width="{contenttablewidth}" {tableinvisibleextra} align="center">
<tr>
<td>$navbar</td>
$ratingdisplay
</tr>
</table>
<!-- /breadcrumb, nav links -->

<a name="posttop"></a>

<!-- End content area table (CREATED IN HEADER!!) -->
</td>
</tr>
</table>

<!-- spacer -->
<table bgcolor="{pagebgcolor}" width="{tablewidth}" cellpadding="0" cellspacing="0" border="0">
<tr><td width="10"><img width="10" height="1" src="{imagesfolder}/space.gif" alt=""></td><td width="100%">
<!-- /spacer -->

$poll

<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="{contenttablewidth}" {tableinvisibleextra} align="center">
<tr>
<td><smallfont>$pagenav $firstunread&nbsp;</smallfont></td>
<td align="right"><smallfont>
<img src="{imagesfolder}/prev.gif" alt="" border="0">
<a href="showthread.php?s=$session[sessionhash]&amp;threadid=$threadid&amp;goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=$session[sessionhash]&amp;threadid=$threadid&amp;goto=nextnewest">Next Thread</a>
<img src="{imagesfolder}/next.gif" alt="" border="0">
</smallfont></td>
</tr>
</table>
<!-- first unread and next/prev -->

<table cellpadding="{tableouterborderwidth}" cellspacing="0" border="0" bgcolor="{tablebordercolor}" {tableouterextra} width="{contenttablewidth}" align="center"><tr><td>
<table cellpadding="4" cellspacing="{tableinnerborderwidth}" border="0" {tableinnerextra} width="100%">
<tr>
<td bgcolor="{tableheadbgcolor}" width="175" nowrap><smallfont color="{tableheadtextcolor}" class="thtcolor"><b>Author</b></smallfont></td>
<td bgcolor="{tableheadbgcolor}" width="100%">
<!-- Thread nav and post images -->
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td width="100%"><smallfont color="{tableheadtextcolor}" class="thtcolor"><b>Thread</b></smallfont></td>
<td><a href="newthread.php?s=$session[sessionhash]&amp;action=newthread&amp;forumid=$forum[forumid]"><img src="{newthreadimage}" border="0" alt="Post New Thread"></a></td>
<td><normalfont>&nbsp;&nbsp;</normalfont></td>
<td><a href="newreply.php?s=$session[sessionhash]&amp;action=newreply&amp;threadid=$threadid"><img src="$replyclose" border="0" alt="Post A Reply"></a></td>
</tr>
</table>
<!-- /Thread nav and post images -->
</td>
</tr>
</table>
</td></tr></table>

<!-- /spacer -->
</td><td width="10"><img width="10" height="1" src="{imagesfolder}/space.gif" alt=""></td></tr></table>
<!-- /spacer -->

$postbits

<!-- spacer -->
<table bgcolor="{pagebgcolor}" width="{tablewidth}" cellpadding="0" cellspacing="0" border="0">
<tr><td width="10"><img width="10" height="1" src="{imagesfolder}/space.gif" alt=""></td><td width="100%">
<!-- spacer -->

<table cellpadding="{tableouterborderwidth}" cellspacing="0" border="0" bgcolor="{tablebordercolor}" {tableouterextra} width="{contenttablewidth}" align="center"><tr><td>
<table cellpadding="4" cellspacing="{tableinnerborderwidth}" border="0" {tableinnerextra} width="100%">
<tr>
<td bgcolor="{tableheadbgcolor}" width="100%">
<!-- time zone and post buttons -->
<table border="0" cellspacing="0" cellpadding="0" bgcolor="{tableheadbgcolor}">
<tr>
<td width="100%"><smallfont color="{tableheadtextcolor}"><b>$timezone</b></smallfont></td>
<td><a href="newthread.php?s=$session[sessionhash]&amp;action=newthread&amp;forumid=$forum[forumid]"><img src="{newthreadimage}" border="0" alt="Post New Thread"></a></td>
<td><normalfont>&nbsp;&nbsp;</normalfont></td>
<td><a href="newreply.php?s=$session[sessionhash]&amp;action=newreply&amp;threadid=$threadid"><img src="$replyclose" border="0" alt="Post A Reply"></a></td>
</tr>
</table>
<!-- /time zone and post buttons -->
</td>
</tr>
</table>
</td></tr></table>

<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="{contenttablewidth}" {tableinvisibleextra} align="center">
<tr>
<td><smallfont>$pagenav&nbsp;</smallfont></td>
<td align="right"><smallfont>
<img src="{imagesfolder}/prev.gif" alt="" border="0">
<a href="showthread.php?s=$session[sessionhash]&amp;threadid=$threadid&amp;goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=$session[sessionhash]&amp;threadid=$threadid&amp;goto=nextnewest">Next Thread</a>
<img src="{imagesfolder}/next.gif" alt="" border="0">
</smallfont></td>
</tr>
</table>
<!-- first unread and next/prev -->
$replybox
<!-- /spacer -->
</td><td width="10"><img width="10" height="1" src="{imagesfolder}/space.gif" alt=""></td></tr></table>
<!-- /spacer -->

<!-- restart content table from header -->
<table cellpadding="10" cellspacing="0" border="0" width="{tablewidth}" bgcolor="{pagebgcolor}" align="center">
<tr>
<td>

<!-- thread options links -->
<table cellpadding="{tableouterborderwidth}" cellspacing="0" border="0" bgcolor="{tablebordercolor}" {tableouterextra} align="center"><tr><td>
<table cellpadding="4" cellspacing="{tableinnerborderwidth}" border="0" {tableinnerextra} width="100%">
<tr>
<td bgcolor="{firstaltcolor}" align="center"><smallfont>
<img src="{imagesfolder}/printer.gif" alt="" border="0" align="absmiddle">
<a href="printthread.php?s=$session[sessionhash]&amp;threadid=$threadid">Show Printable Version</a> |
<img src="{imagesfolder}/sendtofriend.gif" alt="" border="0" align="absmiddle">
<a href="sendtofriend.php?s=$session[sessionhash]&amp;threadid=$threadid">Email this Page</a> |
<img src="{imagesfolder}/subscribe.gif" alt="" border="0" align="absmiddle">
<a href="member2.php?s=$session[sessionhash]&amp;action=addsubscription&amp;threadid=$threadid">Subscribe to this Thread</a>
</smallfont></td>
</tr>
</table>
</td></tr></table>
<!-- /thread options links -->

<br>

<!-- forum jump and rate thread -->
<table cellpadding="2" cellspacing="0" border="0" width="{contenttablewidth}" {tableinvisibleextra} align="center">
<tr>
<td>$forumjump</td>
<td align="right">$threadrateselect</td>
</tr>
</table>
<!-- /Rate this thread -->

<br>

<!-- forum rules and admin links -->
<table cellpadding="2" cellspacing="0" border="0" width="{contenttablewidth}" {tableinvisibleextra} align="center">
<tr valign="bottom">
<td><smallfont><b>Forum Rules:</b>$forumrules</smallfont></td>
<td align="right">
$adminoptions
</td>
</tr>
</table>
<!-- /forum rules and admin links -->

$footer

</body>
</html>

[calorie]

Thanks, but I meant on the actual webpage, when you right click and view source, right after the following, what do you see?


<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="100%" align="center">
<tr>
<td><font face="verdana,arial,helvetica" size="1" >&nbsp;</font></td>
<td align="right"><font face="verdana,arial,helvetica" size="1" >
<img src="images/prev.gif" alt="" border="0">
<a href="showthread.php?s=&amp;threadid=59&amp;goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=&amp;threadid=59&amp;goto=nextnewest">Next Thread</a>
<img src="images/next.gif" alt="" border="0">
</font></td>
</tr>
</table>
<!-- first unread and next/prev -->


Also, do you have any other hacks installed? What's your board URL - PM it if wanted?

Edit: The problem blakkboy was having has been fixed. :)

[fantasyten]

what am I doing wrong! What is meant to go in the new template? Just the words:
Post Reply
Your Reply: [check message length]

??My computer may not be showing this up right?

[fantasyten]

think it may be that my reader of the code is showing up the insert code to put in template: showthread_replybox
What should I put in this template?

[Nathan_R]

sweet! Thanks for the hack (and javascript fix); it's beautiful

[legendarysk8er]

I've installed the rpg integration hack, lesane's store, the arcade, but this has been the hack I've had most trouble with. Maybe it was because I was tired and kept making simple mistakes.

Installed on vB 2.3.2.

Thanks FireFly!

[Blindchild02]

hahaha loser :p

[Gary King]

hahaha loser :p
:rolleyes:

[Blindchild02]

ahhaha dont worry, i know him lol

[legendarysk8er]

Yeah, we're friends.

I don't know why, but for some reason it takes a bit before the quick reply shows up at the bottom of a thread.

[Gary King]

Yeah, we're friends.

I don't know why, but for some reason it takes a bit before the quick reply shows up at the bottom of a thread.
Because of WYSIWYG editor to load.

[Blindchild02]

that used to happen to me. its cuz of ur expanded style, try ur style fixed. and it wont take so long.

[copyninja]

Does this work with vB 2.3.2 ???

[legendarysk8er]

Yes, I just got done installing it on vB 2.3.2.

[TheComputerGuy]

Hi...

I am putting the 2.3.2 version out there...

This is the version that Chen originally created...and I just got it working.

I got it working on www.runaked.com if you need to see it to believe it.

Rock on!

[copyninja]

yeah i forgot to post back.. i got it to work on my vb 2.3.2

[Red Blaze]

Hi...

I am putting the 2.3.2 version out there...

This is the version that Chen originally created...and I just got it working.

I got it working on www.runaked.com if you need to see it to believe it.

Rock on!

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

There are two of them in showthread.php. Do I replace both codes? o.o;

[Reverend]

Hi...
I am putting the 2.3.2 version out there...
I got it working on www.runaked.com if you need to see it to believe it.
Your footer shows you are still using 2.3.0. :confused:

[ry@n]

I'm having a problem finding the first part of the code in showthread.php

Am I looking in the correct place?

Show Thread Templates [expand] > showthread [change original]

Before I get to frustrated with this, maybe someone could point me in the right direction? This is my first attempt of adding a hack to my board. Thanks.

ryan@chicagovelocity.com

[ry@n]

nevermind, I found it :p

[RPGXtreme]

I got a bit of trouble.

The quick Reply box is at the top of the thread, can someone please help me to move it down to the bottom. Thanks.

[Dean C]

Just look for the next chunk of code - you added it at the first instance - not the second :)

[klaattu]

After 3 months of leaving my forum as is, I returned to hacking it and stalled some hacks, but hands down the best is this one
THANKS FireFly !!!

Now I have a weird Problem, I installed it tested it and as you can see it I translated it, but even when I did not make any changes the Qreply apperared in the TOP of thew page, I have broken my Skull figuring out why, I even reinstale dit and the same thing happens...any hints?

ehere is a Screen of the problem

Thanks again!

[Gary King]

After 3 months of leaving my forum as is, I returned to hacking it and stalled some hacks, but hands down the best is this one
THANKS FireFly !!!

Now I have a weird Problem, I installed it tested it and as you can see it I translated it, but even when I did not make any changes the Qreply apperared in the TOP of thew page, I have broken my Skull figuring out why, I even reinstale dit and the same thing happens...any hints?

ehere is a Screen of the problem

Thanks again!
Add the quick reply variable to the bottom of the showthread template, to the second instance of where you're supposed to put it.

[patriciafrankie]

I have a question... I don't know if it has been answered or not as I haven't looked through the entire thread.. lol, but where it says:

1. In showthread.php find this bit of code:
// ##################################################
if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}
// ##################################################

I cannot find the second part in the php file. Will this work with v2.3.2?

TIA
Patricia

[Gary King]

I have a question... I don't know if it has been answered or not as I haven't looked through the entire thread.. lol, but where it says:

1. In showthread.php find this bit of code:
// ##################################################
if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;
}
// ##################################################


I cannot find the second part in the php file. Will this work with v2.3.2?

TIA
Patricia
Yes, should work with 2.3.2

[patriciafrankie]

Thank you :)

Another question, if you don't mind.

3. In the "showthread" template add $replybox right after the following:
// ##################################################
<!-- first unread and next/prev -->
<table cellpadding="2" cellspacing="0" border="0" width="95%" align="center">
<tr>
<td><smallfont>$pagenav&nbsp;</smallfont></td>
<td align="right"><smallfont>
<img src="https://vborg.vbsupport.ru/images/prev.gif" alt="" border="0">
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextoldest">Last Thread</a>
&nbsp;
<a href="showthread.php?s=$session[sessionhash]&threadid=$threadid&goto=nextnewest">Next Thread</a>
<img src="https://vborg.vbsupport.ru/images/next.gif" alt="" border="0">
</smallfont></td>
</tr>
</table>
<!-- first unread and next/prev -->
// ##################################################

What 'showthread' template is this referring to?

Thanks,
Patricia

[Gary King]

The template in the admin cp, named showthread :rolleyes:

[patriciafrankie]

n/m I got it :)

lol.. I'm a newbie at this. I'm full of questions. How do I get rid of the second quick reply? I have two for some reason.

[Gary King]

n/m I got it :)

lol.. I'm a newbie at this. I'm full of questions. How do I get rid of the second quick reply? I have two for some reason.
Find the $quickreply variable (or something similiar to that that you inserted for this hack), and remove one of them.

[ViewMy.biz]

If I can't find the second part in showthread what do I replace?

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;

[ViewMy.biz]

I should have said I am in 2.3.2 In the first instance this follows:

$bbcodeon=iif($forum[allowbbcode],$ontext,$offtext);
$imgcodeon=iif($forum[allowimages],$ontext,$offtext);
$htmlcodeon=iif($forum[allowhtml],$ontext,$offtext);
$smilieson=iif($forum[allowsmilies],$ontext,$offtext);

IN the second instance this follows:

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}

[klaattu]

Thanks a lot Its ok now, by the way you can put banners inside those quick reply with the hack ehere in the Vbulletin.org, I am testing it if its ok Ill post the hack later!

[tsmith025]

I installed this hack on 2.3.2. I cant get the Reply Box to show up. But when I add a line of text where the box should beI can see the text. I follewed the directions very carefully and I have done it 3 times now. Can anybody help me please???

My url is: www.offshoremuscle.com

[tsmith025]

I have attached a screenshot for you to view.

[AndreaBash]

I have read the entire thread now.. and have also searched it. I am trying desperately to add $vbcode_buttons to my QR box... but no matter where I put it or how I add it, nothing shows up.

I looked at another template and confirmed that $vbcode_buttons is working and showing the correct thing on other templates. What could I possibly be doing wrong?

[Scott-E]

I'm not sure if this was covered at all but I have installed the hack and it's running fine, but I also installed the ability to turn off the quick reply box.

However after making the changes needed it won't show up in Edit Options.

[Dean C]

Ok i'm making this post to link to in the first post of this thread as it's such a frequently asked question.

To add smilies to your quick reply box do the following:
.................................................. ....................................

In showthread.php find:

$textareacols = gettextareawidth();


Right below it add:

$clickysmilies = getclickysmilies();


Then in your 'showthread_replybox' template add the following right at the top of the template:


<script language="Javascript" src="vbcode.js"></script>
<script language="Javascript" src="vbcode_language.js"></script>


Then find again in your 'showthread_replybox' template:


<normalfont><b>Your Reply:</b></normalfont>


Replace it with:


<normalfont><b>Your Reply:</b></normalfont><br />$clickysmilies

[Gary King]

Good idea mist ;)

[klaattu]

I was lazy to implement the smilies but after seeing the previous post, oh man...In 3 minutes it was intalled !!
THANKS A LOT

[Dean C]

I was lazy to implement the smilies but after seeing the previous post, oh man...In 3 minutes it was intalled !!
THANKS A LOT
Yep it was easy to do just that it wasn't made clear at any point during the thread along with some other issues. This being such a popular hack I thought it was time to make it clear for new users in the first post what to do about a few issues :)

[RandyP3]

I get a problem after downloading this. Attached the screen shot.

[klaattu]

Add the quick reply variable to the bottom of the showthread template, to the second instance of where you're supposed to put it.

same thing happened to me YOU inserted the $reply (variable) in the first occurence of the template not the second (the example in this thread happens TWICE in the template) so....check the template and youll see that the template has the same code at the beginig and att the end,,,DO IT AT THE END then It will appear at he bottom... (the Qreply box)

[stark427]

I don't know how this could be related but I have noticed that with the last 2-3 versions of 2.x.x , after I apply the Quick Reply hack, I have problems with the "Go to first unread post".

If I remember well the probs started after 2.3.0.
Clicking on the "got to first unread post" does not always get you to the earliest unread post, but it leads to 2-3 later "new" posts.

This has been confirmed by several members of my forums.
I tried to see what happens and removed the QR hack. Now the "go to first unread post" seems to work ok (as far as I have tested it).

Not sure if there is any "conflict" but I have also read references to this prob and its connection with the Quick Reply hack at the VBulletin.com board. Meaning that there are other members who have said that they had the prob after they applied the hack.

Anyone else with the same prob?

thanx

[ViewMy.biz]

...NOTE: For the vB 2.3.2 version please see this post....

Thanks! For a really quick (no bells) quick reply box (which I sorely needed) for 2.3.2

It is working flawlessly.

[buurman]

This works absolutely great, and easy install :)

thx, you are my hero :)

[gldtn]

If I can't find the second part in showthread what do I replace?

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ((!isset($pagenumber) or $pagenumber==0) and $pagenumber!="lastpage") {
$pagenumber=1;

The same here, I'm using 2.3.2.. in showthread.php there is:

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

$bbcodeon=iif($forum[allowbbcode],$ontext,$offtext);
$imgcodeon=iif($forum[allowimages],$ontext,$offtext);
$htmlcodeon=iif($forum[allowhtml],$ontext,$offtext);
$smilieson=iif($forum[allowsmilies],$ontext,$offtext);

and another line:

if (!$getperms['canviewothers'] and ($thread['postuserid']!=$bbuserinfo['userid'] or $bbuserinfo['userid']==0)) {
show_nopermission();
}

if ($noshutdownfunc) {
$DB_site->query("UPDATE thread SET views=views+1 WHERE threadid='$threadid'");
} else {
$shutdownqueries[]="UPDATE LOW_PRIORITY thread SET views=views+1 WHERE threadid='$threadid'";
}


So what should I replace the code given on quickreply.txt with under showthread.php?

Anyone that got it going under 2.3.2 can help?

Thanks

[Gary King]

Chen has a link to the modifications you have to make if you're running 2.3.2 in the first post of this thread I believe.

[gldtn]

Sorry guys, I can't believe I missed that in plain BOLD writing :P

[Gary King]

Sorry guys, I can't believe I missed that in plain BOLD writing :P
np

[Ajay]

I have 2.3.2 and I did everything that the instructions said to do and the reply box doesn't work. Yes, I did look at the new instructions for 2.3.2, those are the ones I followed.

[ViewMy.biz]

IT works perfect you hav to replace the third reference to the subject

[Ajay]

Huh?

[wvvwnet]

Tyro Hacker

Joined: May 2002

Style: Dark Blue IT works perfect you hav to replace the third reference to the subject


the same problem I have, what do you mean ?

[X-Sector]

Hiya, I have installed this hack and l did following the insulations. Awhile later.. I tried to view my showthread but the only problem l got,

Parse error: parse error in /home/x-sector/public_html/forums/showthread.php on line 505

Can anybody help me? thanks

[Josh Combs]

Hi I am trying to install this feature to my forum, and I am having an error thrown out to me :(

/home/gmpt/public_html/forums/showthread.php on line 90

and I have 2.3.2 and I followed Chen's instructions and to no avail not able to work.... Can some one please help..

[Josh Combs]

nevermind I got it, :) I forgot to get the } ad the end :) thanks anyways

[LukeC]

Parse error: parse error in /home2/jagged/public_html/forums/showthread.php on line 89

Thats the error I got :(

[Gary King]

Parse error: parse error in /home2/jagged/public_html/forums/showthread.php on line 89

Thats the error I got :(
Show us line 89.

[LukeC]

K, I fixed the error, but its showing up above my posts rather than on the bottom :( Also, I have version 2.32

[LukeC]

I just had to find the place in the showthread template and move $replybox down further below the submit reply buttons, thanks anyhow Gary ;)

[xxxsaint]

has anybody successfully added smilies to the 2.3.2 replybox ? I've tried the directions that Mist posted , but they don't show up.

[tsmith025]

I made a post for some help over 3 weeks ago and nobody replied. Is there anybody here who can help me????

[Slybone]

Hmmm, when I added the Smiles it didnt show up on 2.3.2 do the smiles not work on it?

[hexonxonx]

As stated in prvious page find the second instance of

$textareacols = gettextareawidth();

then add:

$clickysmilies = getclickysmilies();

The smilies will then show on 2.3.2.

[xxxsaint]

As stated in prvious page find the second instance of

$textareacols = gettextareawidth();

then add:

$clickysmilies = getclickysmilies();

The smilies will then show on 2.3.2.



um , no , no it won't , that's why we're asking for someone that has it running on a 2.3.2 board to lend a hand and tell how it's done.

[hexonxonx]

I am running a 2.3.2 board. After I did this:

As stated in previous page find the second instance of

$textareacols = gettextareawidth();

then add:

$clickysmilies = getclickysmilies();

All worked fine.

[hexonxonx]

look at any thread on my board
http://forums.stairsandflowers.com/index.php?s=

[Gary King]

look at any thread on my board
http://forums.stairsandflowers.com/index.php?s=
Looks like you need to be registered to see the quick reply.

[hexonxonx]

Looks like you need to be registered to see the quick reply.

Oops sorry about that. I guess it's by default so there is nothing I can do to make it show for non registered.

[xxxsaint]

k , got it now , thanks for the help, I had it stuck after the FIRST instance , not the second. Benefits of a 5 day marathon to restore a hacked forum.

[Gary King]

Oops sorry about that. I guess it's by default so there is nothing I can do to make it show for non registered.
You can allow guests to be able to reply to threads if you want to show quick reply to guests ;)

[Destiny Islands]

The vB2.3.2 version was just as easy to install as the orignal great job!

/me Clicks Install

[myst1333]

Does any one know what i have to adjust in the showthread.php to get my vB buttons and smilies and such to appear on a quick reply box? (for v2.3.2)

[myst1333]

nvmd, i figured it out, btw hexonxonx's hack for smiles works except he changed the smily variable to $clickysmiles thats why none of yours work and the line for vB buttons (if anyone wants to know) is:

$vbcode_buttons = getcodebuttons();

and can be placed right after the smiles code

[wickedfate]

hey, ive got vbulletin 3.0.0 Beta 7 and want to know if this hack would work on this version? if not can someone help me out?

[Gary King]

hey, ive got vbulletin 3.0.0 Beta 7 and want to know if this hack would work on this version? if not can someone help me out?
It's already built-in to vBulletin 3.

[Naruto Shock]

awesome hack i luv it! :)

[X-Sector]

Hmm, Ive installed it and the box didn't show up :(

[X-Sector]

can anybody help?

[Gary King]

can anybody help?
Well, I thought the obvious was obvious enough, but since you're so desperate for someone to reply back, I'll see if this helps :):

Did you try the installation instructions for vB 2.3.2?

[X-Sector]

Yup, I looked at the instructions very carefully and installed it but the box doesn't show up.

I used a good php editor like dreamweaver mx to edit the codes.

[tsmith025]

I am having the problem of it not showing up as well. I am running 2.3.2 and used the instructions for it. I even added text where the box is supposed to be and the text shows up. I had PM'd GaryW for some help over a month ago and never got a reply :-( I thought it would be a little easier to get some help.

[X-Sector]

Exactly, I cant wait to get some help :(

[X-Sector]

anybody help plz?