Everywhere Sidebar 4 VB4

[almannai]

I've installed this mod and I would like to buy the Gold version as I need the rotating banner system. However, I have a few questions.

1. The page load has slowed down a lot since I installed this. To test I turned it off on showthread and that page loads ok whereas showforum loads slow with ESB turned on.

2. The quick reply is grayed out when this is enabled on showthread. If resized it becomes active. Or you need to hit go advanced. But that will confuse users. Any way around it?

3. My poll was showing up in sidebar until I installed this. Now the poll block is empty. Anyone had luck with polls showing up with this? I am using this mod for polls in sidebar.
https://vborg.vbsupport.ru/showthread.php?t=266481

This is on vBulletin 4.1.5

1. The page load depends on what you have in sidebar the more content and database pulling the slower the page will become.
2. check this http://last24tech.com/ website it using 4.1.5 same version as yours with esb gold version; as I test it the quick reply is working fine.
3. I didn't test it with this mod but when i have the time I will do.

Regards,

[Trevor Matthews]

Hi

Can you email me the latest Gold version please?

Many thanks.

[inphoenix]

1. The page load depends on what you have in sidebar the more content and database pulling the slower the page will become.
2. check this http://last24tech.com/ website it using 4.1.5 same version as yours with esb gold version; as I test it the quick reply is working fine.
3. I didn't test it with this mod but when i have the time I will do.

Regards,

The page load was exact same before and after installation of ESB. I just changed the option Show ESB Onload from yes to no and the page loads normally. After this I also turned on the show ESB on showthread and the reply is not greyed out anymore. Not sure why and how but it works now.

Only remaining issue is the poll mod.

[almannai]

Hi

Can you email me the latest Gold version please?

Many thanks.

I've pm'd you

[almannai]

The page load was exact same before and after installation of ESB. I just changed the option Show ESB Onload from yes to no and the page loads normally. After this I also turned on the show ESB on showthread and the reply is not greyed out anymore. Not sure why and how but it works now.

Only remaining issue is the poll mod.

Have you checked the website?
http://last24tech.com/forum.php

[inphoenix]

Have you checked the website?
http://last24tech.com/forum.php

Do you know which mod is being used for showing poll in side bar?

[almannai]

Do you know which mod is being used for showing poll in side bar?

Yes it is same mod you post by Ayush, but the ESB is the latest gold version.

[dilbert]

I have a version you have done some custom work to. When I view my Blog with ESB active it scrunches the blocks on the right up. and makes it unreadable, when I deactivate it, it looks fine. I am not trying to activate ESB on the Blog, just to get the vB blocks to display correctly while ESB is active.
Can you please suggest a solution? I didn't see one previously posted.
Thanks.

[almannai]

I have a version you have done some custom work to. When I view my Blog with ESB active it scrunches the blocks on the right up. and makes it unreadable, when I deactivate it, it looks fine. I am not trying to activate ESB on the Blog, just to get the vB blocks to display correctly while ESB is active.
Can you please suggest a solution? I didn't see one previously posted.
Thanks.

I sent a pm to you..

Regars,

[almannai]

The page load was exact same before and after installation of ESB. I just changed the option Show ESB Onload from yes to no and the page loads normally. After this I also turned on the show ESB on showthread and the reply is not greyed out anymore. Not sure why and how but it works now.

Only remaining issue is the poll mod.

You disappeared!! :)

How it goes?

[janslu]

Hi,
My database load rose by almost 70% after I upgraded version 1.1.4 to 1.4.4.4 yesterday. Is there any reason for this behaviour? Any chance for a better caching of content blocks? I have 10 blocks but most of them use long cache time as they are static and are being displayed for every user...

[inphoenix]

You disappeared!! :)

How it goes?

Sorry. I was dealing with an issue on the forum and had to turn off this mod to get rid of it. The forum and side bar mod works fine with Internet explorer and chrome on a PC. However some users on firefox and safari (mac) said they see a ghost banner right in the top middle of forum home and they cannot click any link from froum home. I wasn't able to recreate the issue until I donwloaded firefox (on PC) and saw it myself. I turned off another mods and finally turning off this mod resolved it. I can send you a screen shot of this issue via email. I do have an aftermarket style installed. Maybe that is causing the issue. Not sure what the problem is but I would really like to have it resolved. I love this mod and want the banner rotation with gold version. But I do want it to work as well. PM me with your email if you want a screen shot or if you know what the issue is let me know the fix.

[almannai]

Sorry. I was dealing with an issue on the forum and had to turn off this mod to get rid of it. The forum and side bar mod works fine with Internet explorer and chrome on a PC. However some users on firefox and safari (mac) said they see a ghost banner right in the top middle of forum home and they cannot click any link from froum home. I wasn't able to recreate the issue until I donwloaded firefox (on PC) and saw it myself. I turned off another mods and finally turning off this mod resolved it. I can send you a screen shot of this issue via email. I do have an aftermarket style installed. Maybe that is causing the issue. Not sure what the problem is but I would really like to have it resolved. I love this mod and want the banner rotation with gold version. But I do want it to work as well. PM me with your email if you want a screen shot or if you know what the issue is let me know the fix.

Sorry no support for custom styles.

[janslu]

Hi almannai,

Few days have passed and my database is still having problems with increased load after the upgrade. I get repeated errors like this one:

SELECT block.*,
blocktype.productid, blocktype.name AS blocktypename, blocktype.title AS blocktypetitle,
blocktype.description as blocktypedescription, blocktype.allowcache
FROM block AS block
LEFT JOIN blocktype AS blocktype ON (block.blocktypeid = blocktype.blocktypeid)
WHERE 1 AND block.active = 1 AND blocktype.productid IN ('everywhere_sidebar','GaduGadu','vbblog','crawlab ility_sitemap','crawlability_vbseo','evbs_sstab_ad vanced','_vboptimise_dbtech','welcome_headers4t',' eparate','vsa_sfm','sevenskins_imageresizer','gall ery','psi_smqre','dp_sphinx_search','vbulletin','' )
ORDER BY block.displayorder, block.title;
It was working better with version 1.1.2 but I have troubles getting the old version to work with vb 4.1.7. Can you think of any way to speed up the process of rendering the sideblock? What may be the reason of query number increase between 1.1.2 and 1.4.4.4?

[almannai]

Hi almannai,

Few days have passed and my database is still having problems with increased load after the upgrade. I get repeated errors like this one:

SELECT block.*,
blocktype.productid, blocktype.name AS blocktypename, blocktype.title AS blocktypetitle,
blocktype.description as blocktypedescription, blocktype.allowcache
FROM block AS block
LEFT JOIN blocktype AS blocktype ON (block.blocktypeid = blocktype.blocktypeid)
WHERE 1 AND block.active = 1 AND blocktype.productid IN ('everywhere_sidebar','GaduGadu','vbblog','crawlab ility_sitemap','crawlability_vbseo','evbs_sstab_ad vanced','_vboptimise_dbtech','welcome_headers4t',' eparate','vsa_sfm','sevenskins_imageresizer','gall ery','psi_smqre','dp_sphinx_search','vbulletin','' )
ORDER BY block.displayorder, block.title;
It was working better with version 1.1.2 but I have troubles getting the old version to work with vb 4.1.7. Can you think of any way to speed up the process of rendering the sideblock? What may be the reason of query number increase between 1.1.2 and 1.4.4.4?

I didn't test it on vb4.1.7 am still on 4.1.5, once upgrade and get this error I will upgrade the mod.

For the slowness you need to decrease the number of blocks for max of 6 and use different blocks for different forums and/or pages.

Edited:
One of the guys checked 1.4.4.4 on 4.1.7 and it's ok. Check your settings!

[janslu]

Sorry i wasn't clear. This error is caused by my db server timing out (MySQL server has gone away). I just want to know why ES 1.1.2 was working fine and with the same number of blocks has problems in version 1.4.4.4). My forum is busy but the increase in load is substantial and I think this might indicate that there's a place for substantial optimization.

Sorry for bothering. I'd be happy to return to 1.1.2 but I have troubles getting it to work with vb 4.1.7.

[almannai]

Sorry i wasn't clear. This error is caused by my db server timing out (MySQL server has gone away). I just want to know why ES 1.1.2 was working fine and with the same number of blocks has problems in version 1.4.4.4). My forum is busy but the increase in load is substantial and I think this might indicate that there's a place for substantial optimization.

Sorry for bothering. I'd be happy to return to 1.1.2 but I have troubles getting it to work with vb 4.1.7.

Since 1.2 version controling block showing for different forums and pages has been added. This force to fech each block one by one as configured in the mod options. Version 1.1.2 is simple to either display the full sidebar on the page/forum or not.

[Hostboard]

Seems this is being sold on ebay... Might want to report it...

http://www.ebay.com/itm/Everywhere-sidebar-vbulletin-4-x-/190590277949?pt=LH_DefaultDomain_0&hash=item2c6010d93d

[davio33]

I cant get the "Filter Blocks by forums" part to work on 4.1.6

I place inside of block

block_html_9:10952

but that block still shows throughout the site, instead of just forum#10952

am i doing it right?

[almannai]

Seems this is being sold on ebay... Might want to report it...

pt=LH_DefaultDomain_0&hash=item2c6010d93d[/url]
Ok thanks

I cant get the "Filter Blocks by forums" part to work on 4.1.6

I place inside of block

block_html_9:10952

but that block still shows throughout the site, instead of just forum#10952

am i doing it right?

You need to put this in "Filter Blocks by forums"
block_html_9:10952


You need to put this in "Filter Blocks by pages"
block_html_9:

Where 10952 is forum id

Finally don't forget to set"Block Configuration Switch" to No

Regards,

[oldfan]

Yes I can see that, but I need to see you block coding.



Could you pls post your code settings?

Sorry which code settings? via cp?

thanks

[almannai]

Sorry which code settings? via cp?

thanks

Sorry oldfan, what you wanted to do?

[stb74]

On IE9 when using the side bat the forum Icons have moved left and are sitting outside the forum. Any ideas how to fix.

[ofir24]

when i open the blog tab it's mess everything up, when you have short page with lot's of widgets on the sidebar, the page become longer as the sider bar.

[oldfan]

Sorry oldfan, what you wanted to do?

Block unregistered/guests from viewing sidebar content, thanks

[almannai]

On IE9 when using the side bat the forum Icons have moved left and are sitting outside the forum. Any ideas how to fix.
Can I see your website address?

when i open the blog tab it's mess everything up, when you have short page with lot's of widgets on the sidebar, the page become longer as the sider bar.
Can I see your website address?and a screenshoot?

Block unregistered/guests from viewing sidebar content, thanks

Just put 1 in Excluded usergroups box

[ofir24]

Can I see your website address?and a screenshoot?



my website on my computer, my site has not complete yet, the meaning of the sidbar was to put on the side bar ads, i'm looking for something especially for ads, right now i don't need that sidebar, but thanks anyway.

[oldfan]

Just put 1 in Excluded usergroups box


Still there, http://www.metallifukinca.com/forums.php

[almannai]

Still there, http://www.metallifukinca.com/forums.php

Set Show in errors to No

[oldfan]

Set Show in errors to No
Thanks !!

[almannai]

Thanks !!

No prob

[ofir24]

i decided to build that mod, the problem is...try to build sidebar with lot's of block for the sidebar, all the section will be with all the sidebar, the sidebar doesn't shorten himself to the page, i built lot's of blocks on the side bar for the homepage forum, when i open my setting i saw long page cause the sidebar didn't shorten himself.

[trehanSid]

wrt Gold Version,

Can have multiple blocks & place graphics in there - which can be linked to inner pages of the website also & remain in rotation?

[almannai]

wrt Gold Version,

Can have multiple blocks & place graphics in there - which can be linked to inner pages of the website also & remain in rotation?

In the gold version there is 3 boxes where you can put your ads and each time pages loads an Ad will be displayed. You can also do that using blocks.

[tommythejoat]

Hi, Firstly great Mod. This should be default with the VB Forum Blocks option.

Secondly I have a problem. Your MOD considers usergroup to display the side blocks but it only considers the primary user group and not additional usergroup. So say I have a user ABC belonging to usergroup "X" who is also a Moderator (Additional Usergroup). If I set in this Mod's option to disable the side block for Mods, still user ABC will see the side-block because his primary user group is not Moderator. Hope you can help me with that.

Many thanks.
This is important to me also. I have many members who do not want the sidebar to be displayed. I would like to just have a public usergroup that anyone can join which disables the sidebar. Without that, I would need to double the number of skins or double the number of usergroups to provide the ability to opt out of the sidebar.

I already have a usergroup to opt out of doublepost prevention that works just fine. The logic should be the same for sidebar.

I also do not seem to be able to configure the contents of the sidebard for particular forums. For example, I would like to display the "most replied" list of threads in a given forum at the top of the sidebar for that forum. The directions sound like that would work, but it does not. The forum home blocks display on all forum pages.

I really like the mod, but it will be great if I can customize it just a bit more.:up:

[almannai]

This is important to me also. I have many members who do not want the sidebar to be displayed. I would like to just have a public usergroup that anyone can join which disables the sidebar. Without that, I would need to double the number of skins or double the number of usergroups to provide the ability to opt out of the sidebar.

I already have a usergroup to opt out of doublepost prevention that works just fine. The logic should be the same for sidebar.

I also do not seem to be able to configure the contents of the sidebard for particular forums. For example, I would like to display the "most replied" list of threads in a given forum at the top of the sidebar for that forum. The directions sound like that would work, but it does not. The forum home blocks display on all forum pages.

I really like the mod, but it will be great if I can customize it just a bit more.:up:

I will try add this in the next update.

For filtering you need to put also the block id in the page filtering box like
block_id:

[moonfox]

Currently using ver 1.4.1_pl1 on VB 4.1.3 - thank you.

What version will work with vb 4.1.18 please?

[almannai]

Currently using ver 1.4.1_pl1 on VB 4.1.3 - thank you.

What version will work with vb 4.1.18 please?

I have 4.1.7.

Last thing I've tested ESB Gold 2.1.8 on 4.1.7 and it is working well.
For standard Last tested 1.4.4.4 on 4.1.5 and it working

[moonfox]

Thank you. I have avoided upgrading VB but it sounds like 4.1.18 will be a good one.

I suppose I will need to test but in the meantime if anyone has already upgraded would appreciate hearing about it.

[almannai]

Thank you. I have avoided upgrading VB but it sounds like 4.1.18 will be a good one.

I suppose I will need to test but in the meantime if anyone has already upgraded would appreciate hearing about it.

It is beter to test it on your local machine before you upgrade.

[dannycutts]

I upgraded to 4.1.8 and the sidebar does not display for non logged in users....

[almannai]

I upgraded to 4.1.8 and the sidebar does not display for non logged in users....

Can I see your mod settings screenshoot and website link

[dannycutts]

PM Sent :-)

[cb001]

Couple of problems with the mod and CSS files.

1. If you store CSS as file it causes an invalid link which produces 404 errors.
2. It includes CSS files multiple times therefore leading to unnecessary round trips to the server.

I can demonstrate this with the reference implementation mentioned above: http://last24tech.com/forum.php

If you look at the source you will see that it first includes
<link rel="stylesheet" type="text/css" href="css.php?styleid=2&amp;langid=1&amp;d=1321553939&amp;td=ltr&amp;she et=forumbits.css,forumhome.css,widgets.css,sidebar .css,options.css,tagcloud.css" />

This is from the regular template. Then, just before the IE6 Tag, there is this include, and I think it is coming from the mod. Notice that the order is somewhat different but the files are identical.
<link rel="stylesheet" type="text/css" href="css.php?styleid=2&amp;langid=1&amp;d=1321553939&amp;td=ltr&amp;she et=sidebar.css,forumbits.css,forumhome.css,tagclou d.css,widgets.css,options.css" />

I think this should be fixed.

[almannai]

Couple of problems with the mod and CSS files.

1. If you store CSS as file it causes an invalid link which produces 404 errors.
2. It includes CSS files multiple times therefore leading to unnecessary round trips to the server.

I can demonstrate this with the reference implementation mentioned above: http://last24tech.com/forum.php

If you look at the source you will see that it first includes
<link rel="stylesheet" type="text/css" href="css.php?styleid=2&amp;langid=1&amp;d=1321553939&amp;td=ltr&amp;she et=forumbits.css,forumhome.css,widgets.css,sidebar .css,options.css,tagcloud.css" />

This is from the regular template. Then, just before the IE6 Tag, there is this include, and I think it is coming from the mod. Notice that the order is somewhat different but the files are identical.
<link rel="stylesheet" type="text/css" href="css.php?styleid=2&amp;langid=1&amp;d=1321553939&amp;td=ltr&amp;she et=sidebar.css,forumbits.css,forumhome.css,tagclou d.css,widgets.css,options.css" />

I think this should be fixed.

1. I will look into that

2. Please Correct me if 'm wrong: the browsers are smart enough to not download same file again it will use the cached one. This is used for backward compatibility for vb.

[cb001]

2. Please Correct me if 'm wrong: the browsers are smart enough to not download same file again it will use the cached one. This is used for backward compatibility for vb.

Hi,

they would be if the file name is the same. Since the order is slightly different the filenames are not the same so it is fetched twice, although 100% identical.

Cheers.

[almannai]

Hi,

they would be if the file name is the same. Since the order is slightly different the filenames are not the same so it is fetched twice, although 100% identical.

Cheers.

This duplication happens only at forumhome.
So we need to re-arrange the css's order to match the default vb settings.
Realy this the first time I know that the order of the css files will force to refetch the data.
Do you have the source of that info? so I can read it and understande this matter.

[Vegas Dude]

Can this be put at right side of threads too? Anyone got a working version on their forum they could show me and on the threads?

[almannai]

Can this be put at right side of threads too? Anyone got a working version on their forum they could show me and on the threads?

Yes see the demo The Quest - Islands of Ice and Fire (http://last24tech.com/showthread.php?10450-Update-The-Quest-Islands-of-Ice-and-Fire-(Games)&p=10613#post10613)

[Mysterious Ride]

I'm not sure why, but for some odd reason whenever I enable the Everywhere Sidebar, it moves the forum icons. Here's a pictures so you can see what I'm talking about. This only happens when I'm on Internet Explorer. Is there anyway to stop this from happening. It didn't use to do this a while ago, but when I upgraded to a different version of vB it started to mess up, even with the updated version of the sidebar.

[almannai]

I'm not sure why, but for some odd reason whenever I enable the Everywhere Sidebar, it moves the forum icons. Here's a pictures so you can see what I'm talking about. This only happens when I'm on Internet Explorer. Is there anyway to stop this from happening. It didn't use to do this a while ago, but when I upgraded to a different version of vB it started to mess up, even with the updated version of the sidebar.

what is your website address?
Is this happening with the default style?

[Mysterious Ride]

Yes, it does it on the defualt style as well and I event reverted the forumhome template back to the orignal, but I still have the same problem. But it doesn't do this with everyone. I tried it downstairs in our computer lab and they had IE8 and the icons was where it should be, but when I'm on my computer with IE9 it does mess up. I've asked a friend and she has IE8 and it was messed up at first, but then she signed in and out and it fixed itself, but it still doesn't fix itself on my computer. So I have no idea what's wrong. My website is:

Of Age Wizards (http://www.ofagewizards.com/forums/forum.php)

[laebshade]

Doesn't work. I have an older version I've been using that works, but the newer version doesn't work -- none of the blocks display. I've tried it on a test vB install that has no plugins enabled and is using the stock style.

[almannai]

Yes, it does it on the defualt style as well and I event reverted the forumhome template back to the orignal, but I still have the same problem. But it doesn't do this with everyone. I tried it downstairs in our computer lab and they had IE8 and the icons was where it should be, but when I'm on my computer with IE9 it does mess up. I've asked a friend and she has IE8 and it was messed up at first, but then she signed in and out and it fixed itself, but it still doesn't fix itself on my computer. So I have no idea what's wrong. My website is:

Of Age Wizards (http://www.ofagewizards.com/forums/forum.php)

Ok my laptop is broken once fixed maybe by tomorrow, I will try it I'm using IE9 on the lpt. It looks ok on ie8, but can i ask what if you un-install the ESB does that fix the problem. Also you know ie has some issue with caching have you tried closing all ie windows and open it again or by hotting ctrl+F5 thing.

Doesn't work. I have an older version I've been using that works, but the newer version doesn't work -- none of the blocks display. I've tried it on a test vB install that has no plugins enabled and is using the stock style.

What is the vb version?Have you created any blocks?Can i see your mod options?

[Mysterious Ride]

Ok my laptop is broken once fixed maybe by tomorrow, I will try it I'm using IE9 on the lpt. It looks ok on ie8, but can i ask what if you un-install the ESB does that fix the problem. Also you know ie has some issue with caching have you tried closing all ie windows and open it again or by hotting ctrl+F5 thing.

Alright, but I really have no idea how to fix this problem. I don't know all that much about doing stuff like this, so I'm not sure how to un-install the ESB and what would that do exactly? And all IE windows has been closed and reopened and it still has the same problem and I tried hitting ctrl+F5, but it didn't fix the problem.

I think the reason why it only effects some people is because they might have set something in their IE settings that messes it up because I tried downgrading to IE8 and it was still messed up, but then when I tried resetting everything to default setting it fixed the problem. I just wish I knew exactly what was causing the problem that way members who are experiencing this problem don't have to reset everything.

[almannai]

Alright, but I really have no idea how to fix this problem. I don't know all that much about doing stuff like this, so I'm not sure how to un-install the ESB and what would that do exactly? And all IE windows has been closed and reopened and it still has the same problem and I tried hitting ctrl+F5, but it didn't fix the problem.

I think the reason why it only effects some people is because they might have set something in their IE settings that messes it up because I tried downgrading to IE8 and it was still messed up, but then when I tried resetting everything to default setting it fixed the problem. I just wish I knew exactly what was causing the problem that way members who are experiencing this problem don't have to reset everything.

I can't help much on this as it is not happening to me to debug the problem.

[lodos0677]

wery good mod. then I'm going to try.

[dannycutts]

even after this update the sidebar does not show on the first page loaded for someone who has not been to the page/site before... you have to refresh the page for the sidebar to show... :-(

[almannai]

even after this update the sidebar does not show on the first page loaded for someone who has not been to the page/site before... you have to refresh the page for the sidebar to show... :-(

What is your website? Are you using any type of cache system on the server?

Also check this thread https://vborg.vbsupport.ru/showthread.php?t=274261&highlight=cache

[BGN64]

Um, how much is the Gold version and where can I purchase it?

[almannai]

Um, how much is the Gold version and where can I purchase it?

it cost 29$
Use the left pan in this page
http://vbfixer.com/posting.php?mode=post&f=5
select everywhere sidebar radio button and fill the fields.

[cws]

Is there an update for the paid version awailable too?
How to get it?

[almannai]

Is there an update for the paid version awailable too?
How to get it?

If you order via email contact me on same email you downloaded the product.
If you get the mod from my website you will get it on same page your order it.

[watty005]

excuse my ignorance but can someone tell me what the difference between this mod and the inbuilt forum blocks??

[huevncom]

nice, thanks man

[princesspepper]

Hi there. I have this mod installed on VB 4.1.7 and it is causing the mobile style to not load the forums. All that show when viewing my forum on the iphone are the header and footer.

When I disable this mod it works.

I have just upgraded to the latest version of the mod and it still did not work.

It is the default VB style and the default mobile style.

I really have to use the mobile style, and also the sidebar!... so if there's no way of fixing this, can someone please advise me how I can take it off the mobile style?

EDIT > Scratch that... just found the 'exclude style' setting :o :)

[almannai]

Hi there. I have this mod installed on VB 4.1.7 and it is causing the mobile style to not load the forums. All that show when viewing my forum on the iphone are the header and footer.

When I disable this mod it works.

I have just upgraded to the latest version of the mod and it still did not work.

It is the default VB style and the default mobile style.

I really have to use the mobile style, and also the sidebar!... so if there's no way of fixing this, can someone please advise me how I can take it off the mobile style?

EDIT > Scratch that... just found the 'exclude style' setting :o :)

No prob...

Sorry for the delay

[fmsx]

I instqalled it but it doesnt show anything what am I suppose to write in the

first advertisement field

I gave it a title and left the code empty

can someone give me an example code to put in there to see if it will show up on my forum
because nothing is showing up right now

[almannai]

I instqalled it but it doesnt show anything what am I suppose to write in the

first advertisement field

I gave it a title and left the code empty

can someone give me an example code to put in there to see if it will show up on my forum
because nothing is showing up right now

You should put your adsense or similar code in there, but this will work only in the gold version.

[fmsx]

You should put your adsense or similar code in there, but this will work only in the gold version.


It's not letting me select it in adsense as an area to put it in

also im not trying to use it in a blog just a forum...

where do I get an ad code from anyways?

[almannai]

It's not letting me select it in adsense as an area to put it in

also im not trying to use it in a blog just a forum...

where do I get an ad code from anyways?

sorry for the confusion

This box is meant to be used on the Gold version only, It is added here by mistake even if you add the ads code the php code behind it is missing so it will not work. I will remove these boxes in the next update.

[fmsx]

sorry for the confusion

This box is meant to be used on the Gold version only, It is added here by mistake even if you add the ads code the php code behind it is missing so it will not work. I will remove these boxes in the next update.


there is no side bar coming up... at all
I managed to add in an ad code

but nothing shows up as there is no change to the forum... this plugin doesnt work?

[almannai]

there is no side bar coming up... at all
I managed to add in an ad code

but nothing shows up as there is no change to the forum... this plugin doesnt work?

Have you added any blocks? If you don't know how, Pm me with your admin login I will show you how.

[fmsx]

Have you added any blocks? If you don't know how, Pm me with your admin login I will show you how.


oh I feel so dumb thanks got it to work ^_^

[Bjoern28]

Hi,

little question. I use the option

Filter Blocks by forums

that works great.. but when i add a new forum and add it also in the

Filter Blocks by forums Field the new posts are not shown in the sidebar from this new created forum.

Is this a known problem? Or is there a fix for it?

[almannai]

Hi,

little question. I use the option

Filter Blocks by forums

that works great.. but when i add a new forum and add it also in the

Filter Blocks by forums Field the new posts are not shown in the sidebar from this new created forum.

Is this a known problem? Or is there a fix for it?

What do you mean by "posts are not shown in the sidebar "? Do you have a screenshoot

[Bjoern28]

O man. i am so stupid... ^^

Sorry.. it was my own fault... ^^

I have to add the new Forum to the sidebar block... ^^

So sorry and thanks

[Bjoern28]

O man. i am so stupid... ^^

Sorry.. it was my own fault... ^^

I have to add the new Forum to the sidebar block... ^^

So sorry and thanks

[almannai]

O man. i am so stupid... ^^

Sorry.. it was my own fault... ^^

I have to add the new Forum to the sidebar block... ^^

So sorry and thanks

No prob :)

[gulf4cars]

i am upgrading to 4.1.9, is the mod compatible with it?

[fishmaster]

Somebody confirm smooth working on 4.1.9 please..

[SRSC]

I got the problem when I uninstall Everywhere Sidebar 1.5 The sidebar go to bottom of my forum:(. If I change Store CSS Stylesheets as Files to yes the problem fixed. Now I wan to turn off Store CSS Stylesheets as Files How to fix this?

[moonfox]

Working with 4.1.9

[gulf4cars]

I have installed the mod and it is working smoothly but it is always shown on the right side of the forum. I have tried to move it to the left by changing the block location but nothing happened.

I installed version 1.5

Few days ago the forum was working with version 1.4.4.4 and it was working without problems

[almannai]

I have installed the mod and it is working smoothly but it is always shown on the right side of the forum. I have tried to move it to the left by changing the block location but nothing happened.


I installed version 1.5


Few days ago the forum was working with version 1.4.4.4 and it was working without problems

you can do that form mod options try it please and let me know how it goes?

[gulf4cars]

Sorry i didnt notice. In the older version i was able to change it from forum options, now it only can be changed from the mod options.

Thank you brother

[mmoore5553]

Is there anyway where we can have sidebar on both right and left ? I have bought paid version and really need this option.

[almannai]

Is there anyway where we can have sidebar on both right and left ? I have bought paid version and really need this option.

Sorry there is no such option

[hqarrse]

I'm trying to get a variable in to an html block in ESB, using the plugin / template variable system. This works fine using a plugin for the sidebar on forumhome and forumdisplay, but it doesn't work on showthread. My plugin for showthread is identical to those that work fine for the other forum pages:

hook: showthread_start

vB_Template::preRegister('SHOWTHREAD',array('adman ager_id_banner' => $foruminfo['admanager_id_banner']));
vB_Template::preRegister('navbar',array('admanager _id_banner' => $foruminfo['admanager_id_banner']));
vB_Template::preRegister('block_html_noborder_foru m_mpu',array('admanager_id_banner' => $foruminfo['admanager_id_banner']));


(admanager_id_banner is a google DFP adslot id for each forum)

I have tried sending the variable to sidebar_ext too but no difference. Is there anything different I should do for showthread to make this work?

[hqarrse]

Cracked it - I needed to run my plugin before the sthread sidebar plugin, and now all works fine.

[cws]

How to get the updates for paid version?
Maybe I lost the link?

[almannai]

How to get the updates for paid version?
Maybe I lost the link?

If you lost the link use the order form (http://vbfixer.com/posting.php?mode=post&f=5)to request update

[howit]

I cant manage to exclude blocks from specific forums, what am I doing wrong?

besides that, activating the block configuration switch doesnt change anything. I cant get to see the ids.

using vb 4.1.5

[ngphuc2k]

Thank mod

[howit]

Thank mod


Im not using it, i even uninstalled it, and updated my forum to 4.1.9..

still no joy.

help?

the forum url is forum.globalgames.com.br

[almannai]

Im not using it, i even uninstalled it, and updated my forum to 4.1.9..

still no joy.

help?

the forum url is forum.globalgames.com.br

pm me your admin login

[bperkins88]

I had this modification installed until I installed the Mobile Theme. For some reason, even if I select Do not show on Style 3 (mobile style) It messes my Forum up and all thats visible is the Header and Footer

I have attached an image of whats happening, only the header and footer are Showing. I have a few plugins enabled but have narrowed it down to this particular plugin, if disabled it works properly. Any help would be appreciated.

https://vborg.vbsupport.ru/

[almannai]

I had this modification installed until I installed the Mobile Theme. For some reason, even if I select Do not show on Style 3 (mobile style) It messes my Forum up and all thats visible is the Header and Footer

I have attached an image of whats happening, only the header and footer are Showing. I have a few plugins enabled but have narrowed it down to this particular plugin, if disabled it works properly. Any help would be appreciated.

http://www.concretepumpingpeople.com/forum/upload/IMG_1196.PNG

Disable onload option and see if this fix it.

[bperkins88]

Hey there it goes. Thanks for that. Is there any way to Disable the Advertisments from showing up behind the Login / Register Screens ?

[Mr GRiM]

This doesn't seem to be working too well on 4.1.10, for some reason it will not remember the settings for being closed and always opens again, uninstalled till there is a fix :(

[almannai]

This doesn't seem to be working too well on 4.1.10, for some reason it will not remember the settings for being closed and always opens again, uninstalled till there is a fix :(

What is your website link?

[steeler7]

I'm having the same issue as Mr Grim. It's not retaining settings for being open or closed in vb 4.1.10 and I also ran across an issue that disappeared when I disabled this MOD while troubleshooting where anyone except for Admins that I know of (havent talked to my Mods) were getting "Grayed out" posting boxes in the Quick Reply and regular reply editor. Couldn't post, put up a picture or anything on any browser.

I have the Mod disabled right now but would gladly enable it for testing?

[almannai]

I'm having the same issue as Mr Grim. It's not retaining settings for being open or closed in vb 4.1.10 and I also ran across an issue that disappeared when I disabled this MOD while troubleshooting where anyone except for Admins that I know of (havent talked to my Mods) were getting "Grayed out" posting boxes in the Quick Reply and regular reply editor. Couldn't post, put up a picture or anything on any browser.

I have the Mod disabled right now but would gladly enable it for testing?

Can you enable it please and put your site url

[bperkins88]

how can you have sidebars on both sides of the forum ?

[almannai]

how can you have sidebars on both sides of the forum ?

You can't

[chrisngrod]

Great mod first off.

Just wondering if anyone has had the additional options covered up by the sidebar when posting a new thread. Picture below.

https://vborg.vbsupport.ru/external/2012/01/36.jpg

[almannai]

Great mod first off.

Just wondering if anyone has had the additional options covered up by the sidebar when posting a new thread. Picture below.

https://vborg.vbsupport.ru/attachment.php?attachmentid=135870&stc=1&d=1326899113

Never seen something like that.

What is your vb version?

What about if you shift the sidebar to right side.You can do that from the mod options

[omerfarukak]

This plugin using cpu too much and our pages loading too slow with this plugin. Is there any alternative or other way to place sidebar on everypage(except user page if possible)?

[chrisngrod]

Never seen something like that.

What is your vb version?

What about if you shift the sidebar to right side.You can do that from the mod options

4.1.10 Never noticed it till recently. So I'm guessing this happened after the last couple of updates or so. It is a custom template. Wondering if some tag is messed up or something.

Changed it to the right side and it overlaps still (but on the other side of course).

[almannai]

This plugin using cpu too much and our pages loading too slow with this plugin. Is there any alternative or other way to place sidebar on everypage(except user page if possible)?

Don't put all kind of blocks (specially the db query type) everywhere. Ofcourse this type of action will load slowly. The mod give you the option to cntrol that. Please take the time to understand all the mod options.
4.1.10 Never noticed it till recently. So I'm guessing this happened after the last couple of updates or so. It is a custom template. Wondering if some tag is messed up or something.

Changed it to the right side and it overlaps still (but on the other side of course).

hmmm
Is it working on the default style? if not I will look at it but i need a user login to your forum

[omerfarukak]

Don't put all kind of blocks (specially the db query type) everywhere. Ofcourse this type of action will load slowly. The mod give you the option to cntrol that. Please take the time to understand all the mod options.


Disable Block Cache
Leave this setting alone.
Yes No

What this means? What will do if i select no?

[omerfarukak]

And one more question, after upgrading 4.1.10 our collapse cookies not working, is there any solution?

[bperkins88]

Disable Block Cache
Leave this setting alone.
Yes No

What this means? What will do if i select no?

lol .. leave this setting alone

I dunno, try it out and let us know what happens

[almannai]

Disable Block Cache
Leave this setting alone.
Yes No

What this means? What will do if i select no?
Omer I asked you to take the time with the mod options not forumsidebar and block options this belongs to vbulletin and some of them are overwitten by my mod.

And one more question, after upgrading 4.1.10 our collapse cookies not working, is there any solution?

Will check that do you have any reported symptoms here
https://vborg.vbsupport.ru/showpost.php?p=2289622&postcount=1359



lol .. leave this setting alone

I dunno, try it out and let us know what happens

:p talk to vbulletin guys this not my phrase:D

[omerfarukak]

Will check that do you have any reported symptoms here
https://vborg.vbsupport.ru/showpost.php?p=2289622&postcount=1359


No,we haven't that symptoms. Only thing is its collapse cookie not working. So when someone close it and refreshed page, it's opening again.

[almannai]

No,we haven't that symptoms. Only thing is its collapse cookie not working. So when someone close it and refreshed page, it's opening again.

Ok I guess that symptom was a style problem.

I will check the cookie thing and fix it soon.

Thanks

[victorvu]

Hi:

It sounds pretty good, but I have question before buying it and that is, can I use ESB in non-vbulletin add-ons? For example, dating add-on, donation add-on, ... any of the add-ons.

You mentioned that ESB can be used in CMS, FORUM, and Blog, but can it be used in any grids?

Thanks.

Victor:up:

[omerfarukak]

https://vborg.vbsupport.ru/external/2012/01/33.jpg

here is our not caching templates. Is it your plugins templates? What can we do?

[almannai]

https://vborg.vbsupport.ru/external/2012/01/33.jpg

here is our not caching templates. Is it your plugins templates? What can we do?

You do nothing. The debuger is for developers! Are you a developer? If not why you are concern about the cached and none cached tmplates?

What is probem you are having?

[omerfarukak]

You do nothing. The debuger is for developers! Are you a developer? If not why you are concern about the cached and none cached tmplates?

What is probem you are having?

Yeah I'm a developer also I'm a computer engineer but I'm new at vBulletin.

We have some optimization and performans problems since we are analyzing system...

[iadventure]

This does not work on my site running 4.10. Plans to fix?

[nextstream]

yeah... i install it in 4.1.10. and can't make it work
does is support 4.1.10?

[lfreem2]

This is an awesome mod! Thank you! I am running it in 4.1.10 with no observable issues.

I have one question that I know has drawn a lot of ire here, as it has been asked many times. It is about the top height of the block. In the sidebar.css there are many #sidebar_container options to select from (container, hover, etc), and I have tried to change the value of the padding on several of them, but have still not found the exact one to change the top level height of the side bar to lower it.

Which #sidebar_container specifically do I need to change the padding on?

[nextstream]

Ifreem2

u got it work on 4.1.10?
i use custom skin from completevb.com

do i need to do any adjustment on the template?

[almannai]

This does not work on my site running 4.10. Plans to fix?
Does not work mean a lot of things! Can you be more specific?Have you added any blocks?

yeah... i install it in 4.1.10. and can't make it work
does is support 4.1.10?
If you are using custom skin ask the skin developer

This is an awesome mod! Thank you! I am running it in 4.1.10 with no observable issues.

I have one question that I know has drawn a lot of ire here, as it has been asked many times. It is about the top height of the block. In the sidebar.css there are many #sidebar_container options to select from (container, hover, etc), and I have tried to change the value of the padding on several of them, but have still not found the exact one to change the top level height of the side bar to lower it.

Which #sidebar_container specifically do I need to change the padding on?

have you tried to change it from forumhome.css ?

[lfreem2]

Almannai, there is no #sidebar_container in forumhome.css in version 4.1.10. I definitely need to change it in the sidebar.css. I just don't know which to change. There are at least 30 #sidebar_containers in the sidebar.css. As I said, I've tried to change a bunch of them, but none have any effect on lowering the sidebar so that it matches the height of the forum posts.

nextstream, I do not have a custom skin. I have had zero problems using this mod at all with version 4.1.10. Sounds like it's an issue with your custom skin folks. Have you tried removing the custom skin to see if has any effect?

[steeler7]

So I did some more tests. First, I went through and disabled every Mod I had manually, and then enabled just Everywhere sidebar and I still had the issue of the Text editor graying out leaving me unable to type a post or or do anything with the text editor. So that eliminated a conflict with a Mod for me...

Next I went and enabled Everywhere sidebar with all of my Mod enabled and check it on a forum default template and there was no gray or whatever color your CKeditor skin is, blocking me from typing.

My templates are customized by me but they're not really too intensive. I've mainly done color changes, used a lot of transparency/alpha css and gradient css to replace those images, that's pretty much all and most of that is done in Additional.css

I didnt change anything template wise prior to updating 4.1.10 except some reverts... any idea what css templates would effect this mod?

[brandondrury]

Almannai, there is no #sidebar_container in forumhome.css in version 4.1.10. I definitely need to change it in the sidebar.css

You may need to add #sidebar_container to your additional.css template and add your css changes manually. I find that it's generally simpler to go straight to additional.css than monkey around with 50 different templates.

[lfreem2]

Brandon. If that's the case, I would need the exact html to put in. I am not a developer, so have no idea what I would add. Any idea?

Couldn't the XML of this mod just be changed to address this?

[almannai]

Almannai, there is no #sidebar_container in forumhome.css in version 4.1.10. I definitely need to change it in the sidebar.css. I just don't know which to change. There are at least 30 #sidebar_containers in the sidebar.css. As I said, I've tried to change a bunch of them, but none have any effect on lowering the sidebar so that it matches the height of the forum posts.

nextstream, I do not have a custom skin. I have had zero problems using this mod at all with version 4.1.10. Sounds like it's an issue with your custom skin folks. Have you tried removing the custom skin to see if has any effect?
If you are using Store CSS Stylesheets as Files
you will find is in forumhome-rollup.css

So I did some more tests. First, I went through and disabled every Mod I had manually, and then enabled just Everywhere sidebar and I still had the issue of the Text editor graying out leaving me unable to type a post or or do anything with the text editor. So that eliminated a conflict with a Mod for me...

Next I went and enabled Everywhere sidebar with all of my Mod enabled and check it on a forum default template and there was no gray or whatever color your CKeditor skin is, blocking me from typing.

My templates are customized by me but they're not really too intensive. I've mainly done color changes, used a lot of transparency/alpha css and gradient css to replace those images, that's pretty much all and most of that is done in Additional.css

I didnt change anything template wise prior to updating 4.1.10 except some reverts... any idea what css templates would effect this mod?

your best bit for testing and finding the problem is by using firefox+firebug to eliminate the problem
You may need to add #sidebar_container to your additional.css template and add your css changes manually. I find that it's generally simpler to go straight to additional.css than monkey around with 50 different templates.
As it is got more control for each style
Brandon. If that's the case, I would need the exact html to put in. I am not a developer, so have no idea what I would add. Any idea?

Couldn't the XML of this mod just be changed to address this?

try the above first

[iadventure]

I have tried this with the default skin and my purchased skin. sam results
http://69.175.81.233/JKA

http://69.175.81.233/aaaIMAGES/SC1.jpg
http://69.175.81.233/aaaIMAGES/SC2.jpg
http://69.175.81.233/aaaIMAGES/SC3.jpg

[nextstream]

Does not work mean a lot of things! Can you be more specific?Have you added any blocks?


If you are using custom skin ask the skin developer



have you tried to change it from forumhome.css ?

i already try the default vb4 template
still dont show ESB

actually i upgrade my vb from 3.8 to 4.1.10
not fresh install 4.1.10
then i use custom template from completevb
i found this mod and straight way tried it
but no luck

do i need to enable "forum sidebar and block options" together with ESB?

[paulp]

We have a problem with the hide ability of the sidebar in version 1.5 on our 4.1.10 installation. The user can hide the complete sidebar, but it won't save the hidden stat. As soon as the user reloads or goes to a new page, the sidebar is open again. Any ideas what might be the cause?

Hiding blocks within the sidebar works. Oh, and vB complains about the explode() in the sidebarext_temp template :)

[almannai]

i already try the default vb4 template
still dont show ESB

actually i upgrade my vb from 3.8 to 4.1.10
not fresh install 4.1.10
then i use custom template from completevb
i found this mod and straight way tried it
but no luck

do i need to enable "forum sidebar and block options" together with ESB?

Yes you do and you need to add blocks! If the default vb sidebar is not shown on homepage this will willl not show anywhere.

We have a problem with the hide ability of the sidebar in version 1.5 on our 4.1.10 installation. The user can hide the complete sidebar, but it won't save the hidden stat. As soon as the user reloads or goes to a new page, the sidebar is open again. Any ideas what might be the cause?

Hiding blocks within the sidebar works. Oh, and vB complains about the explode() in the sidebarext_temp template :)

a'm investigating this

[lfreem2]

If you are using Store CSS Stylesheets as Files
you will find is in forumhome-rollup.css

I don't have this. I wish you'd just fix this bug since everyone comments on it, and you don't provide a clear fix for it to line up properly. I am unable to use this hack until that is corrected. I don't want the side bar to be slightly higher than the posts. It does not look clean and appears out of whack with the rest of the site. If you have further advice on what to tweak to correct the height, I look forward to it. I think it's a great tool, but I keep trying to find a place to fix it and it is not where you say it is. Sigh!

[almannai]

I don't have this. I wish you'd just fix this bug since everyone comments on it, and you don't provide a clear fix for it to line up properly. I am unable to use this hack until that is corrected. I don't want the side bar to be slightly higher than the posts. It does not look clean and appears out of whack with the rest of the site. If you have further advice on what to tweak to correct the height, I look forward to it. I think it's a great tool, but I keep trying to find a place to fix it and it is not where you say it is. Sigh!

This file can be found at clientscript/vbulletin_css directory. If you don't want to use "Store CSS Stylesheets as Files" you go to options->style&langauge settings scroll down and set "Store CSS Stylesheets as Files" to No. After setting it to no any changes you make in style variable will take effect on the sidebar.

[lfreem2]

I'm sorry, I just give up. Your directions aren't really clear nor step by step when it comes to dealing with 4.1.10.

The hack does work as advertised, but your instructions to lower the block to the proper alignment does not. At least not for my version of VB.

[mnms]

Hi Almannai

I have an issue with the version 1.5. after the upgrad of VB from 4.1.6 to 4.1.10 all the pages based on search.php gave me an error 500 internal server error.
After investigation with VB support, by disabling ESB all the pages come back without error.

Have you already see that ?
thx

[almannai]

Hi Almannai

I have an issue with the version 1.5. after the upgrad of VB from 4.1.6 to 4.1.10 all the pages based on search.php gave me an error 500 internal server error.
After investigation with VB support, by disabling ESB all the pages come back without error.

Have you already see that ?
thx

No I didn't see that. Canm you provide a link or screenshoot?

No problem found on my test board!

[Jakub03]

is it possible to make the side bar appear on the left side?
http://mypokerhub.com/forum.php

In my settings i have it appear on left but it is showing up on the right

[almannai]

is it possible to make the side bar appear on the left side?
http://mypokerhub.com/forum.php

In my settings i have it appear on left but it is showing up on the right

From sidebar options change it left.

[almannai]

This is an awesome mod! Thank you! I am running it in 4.1.10 with no observable issues.

I have one question that I know has drawn a lot of ire here, as it has been asked many times. It is about the top height of the block. In the sidebar.css there are many #sidebar_container options to select from (container, hover, etc), and I have tried to change the value of the padding on several of them, but have still not found the exact one to change the top level height of the side bar to lower it.

Which #sidebar_container specifically do I need to change the padding on?

I'm sorry, I just give up. Your directions aren't really clear nor step by step when it comes to dealing with 4.1.10.

The hack does work as advertised, but your instructions to lower the block to the proper alignment does not. At least not for my version of VB.



Ok.

In order to the changes of #sidebar_container to take effects in your first post (https://vborg.vbsupport.ru/showpost.php?p=2291755&postcount=1373) you need to make sure that "Store CSS Stylesheets as Files" is disabled.

To disable "Store CSS Stylesheets as Files" dothe following:
1. vbulletin settings->option
2. Go to "style & langauge settings"
3. Scroll down and set "Store CSS Stylesheets as Files" to No
4. Save

Now go to your style variable and set #sidebar_container value

[nextstream]

Yes you do and you need to add blocks! If the default vb sidebar is not shown on homepage this will willl not show anywhere.


Hi almannai

I already did that before.
enable default forum sidebar
add forum block
enable ESB
it still dont show up in my custom template

then i change to my default vb4 template, still dont show up :confused:

[almannai]

Hi almannai

I already did that before.
enable default forum sidebar
add forum block
enable ESB
it still dont show up in my custom template

then i change to my default vb4 template, still dont show up :confused:

Does the default sidebar show up?

The default sidebar will show on the forum homepage only. Make sure you disable or uninstall Everywhere sidebar to check the default sidebar.

[nextstream]

Hi almannai

Yes, the default sidebar show up on both template (default & custom)

Yes, i had uninstall ESB and still the default sidebar show up

[iadventure]

I never got an answer to my question...



I have tried this with the default skin and my purchased skin. sam results
http://69.175.81.233/JKA

http://69.175.81.233/aaaIMAGES/SC1.jpg
http://69.175.81.233/aaaIMAGES/SC2.jpg
http://69.175.81.233/aaaIMAGES/SC3.jpg

[almannai]

I never got an answer to my question...

What is your vb version?

[iadventure]

4.10

[almannai]

Ok.

In order to the changes of #sidebar_container to take effects in your first post (https://vborg.vbsupport.ru/showpost.php?p=2291755&postcount=1373) you need to make sure that "Store CSS Stylesheets as Files" is disabled.

To disable "Store CSS Stylesheets as Files" dothe following:
1. vbulletin settings->option
2. Go to "style & langauge settings"
3. Scroll down and set "Store CSS Stylesheets as Files" to No
4. Save

Now go to your style variable and set #sidebar_container value

Sorry I just found out that this value no longer exist in the newer vbulletin so your best bit is to edit the mod manually or get the gold version where you can edit this value easly from mod options as you can see it in this website (http://last24tech.com/forum.php).

You can see how the sidebar is aligned with the forum contents

Regards,

[almannai]

4.10

you mean 4.1.10 ;)

Don't no why this is happening in your forum. If you wish you can submit paid support from my website (http://vbfixer.com/posting.php?mode=post&f=5)

[iadventure]

paid?? THis is happening on both the default style and other style on a fresh install.

Why would I pay to have something wrok that already should???

Donating to a great free mod is one thing, but getting paid to have it work... LEt's get it working first and I would be happy to donate as I think this is one of the best mods out there.

[iadventure]

you mean 4.1.10 ;)

Don't no why this is happening in your forum. If you wish you can submit paid support from my website (http://vbfixer.com/posting.php?mode=post&f=5)

yes 4.1.10

[almannai]

paid?? THis is happening on both the default style and other style on a fresh install.

Why would I pay to have something wrok that already should???

Donating to a great free mod is one thing, but getting paid to have it work... LEt's get it working first and I would be happy to donate as I think this is one of the best mods out there.

yes 4.1.10

It is working on a lot of sites, but if it requires me to login to your forum and check it, this will take time and can't do this for free anymore

[steeler7]

Almannai...

I solved the gray box or blanking out of the text editor issue I was having. It was caused by a forum block I use for twitter. I used this block for months... and had no problem and somewhere around me updating to vB 4.1.10 and 1.5 of this mod which occurred at the same time, this became a problem. I like my Twitter sidebar blocks :)

Here's my code, maybe you can check it out on a test site of yours and see what you come across?


<script src="http://widgets.twimg.com/j/2/widget.js"></script>
<script>
new TWTR.Widget({
version: 2,
type: 'list',
rpp: 30,
interval: 6000,
title: 'Pittsburgh Pirates News &amp; Talk',
subject: 'Pittsburgh Sports Tavern',
width: 220,
height: 300,
theme: {
shell: {
background: '#000000',
color: '#fec610'
},
tweets: {
background: '',
color: '#444444',
links: '#000000'
}
},
features: {
scrollbar: true,
loop: false,
live: true,
hashtags: true,
timestamp: true,
avatars: true,
behavior: 'all'
}
}).render().setList('pghsportstavern', 'pittsburgh-pirates').start();
</script>


Also.... I still have the issue with the sidebar not retaining it's setting on a refresh if it were collapsed. I saw someone else have that issue here as well. You can check it out and test it - www.pittsburghsportstavern.com/forum

Thanks!!!

[almannai]

Almannai...

I solved the gray box or blanking out of the text editor issue I was having. It was caused by a forum block I use for twitter. I used this block for months... and had no problem and somewhere around me updating to vB 4.1.10 and 1.5 of this mod which occurred at the same time, this became a problem. I like my Twitter sidebar blocks :)

Here's my code, maybe you can check it out on a test site of yours and see what you come across?


<script src="http://widgets.twimg.com/j/2/widget.js"></script>
<script>
new TWTR.Widget({
version: 2,
type: 'list',
rpp: 30,
interval: 6000,
title: 'Pittsburgh Pirates News &amp; Talk',
subject: 'Pittsburgh Sports Tavern',
width: 220,
height: 300,
theme: {
shell: {
background: '#000000',
color: '#fec610'
},
tweets: {
background: '',
color: '#444444',
links: '#000000'
}
},
features: {
scrollbar: true,
loop: false,
live: true,
hashtags: true,
timestamp: true,
avatars: true,
behavior: 'all'
}
}).render().setList('pghsportstavern', 'pittsburgh-pirates').start();
</script>


Also.... I still have the issue with the sidebar not retaining it's setting on a refresh if it were collapsed. I saw someone else have that issue here as well. You can check it out and test it - www.pittsburghsportstavern.com/forum

Thanks!!!

I will try to check it out when i got the time for it.

For the collapse problem it is confirmed as bug (for vb 4.1.10 only) and has been fixed in the gold version. The free version will be updated with this bug fix as will as other minor ones and I hope it will be soon.

[sailnet]

I love this mod - is there any way to put a <BR> between sidebar blocks?

[iadventure]

found that when I disable the top block, it works. could you look at my code adn tell me if you see an issue?

This is the block contents:
<style type="text/css">
ul#slider {
width: 240px;
height: 150px;
list-style-type: none;
margin: 0;
padding: 0;
overflow: hidden;
}

ul#slider li {
float: left;
position: relative;
/*display: none;*/
}

ul#slider li div {
position: absolute;
width: 240px;
background-color: #000;
color: #fff;
left: 0;
/*display: none;*/
padding: 10px;
}

.top {
top: 0;
}

.bottom {
bottom: 0;
}
</style>
<script src="js/jquery.js" type="text/javascript"></script>
<script src="js/mySlider.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function() {
$("#slider").mySlider({
timeOut: 6000,
captionOpacity: .7
});
});
</script>
<ul id="slider">

<li>
<a href="http://jk-adventure.com/JKA/content.php?167-JK-Adventure-com-How-To-Install-the-Redneck-Ram-Hydro-Steering-Assist-Kit"><img src="http://jk-adventure.com/Articles/redneckram/redneck240.jpg" alt="" />
<div class="top">
Redneck Ram Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?166-JK-Adventure-com-How-To-Install-Synergy-drag-link-flip-kit-and-weld-on-track-bar-bracket"><img src="http://jk-adventure.com/Articles/Synergy/synergy240.jpg" alt="" />
<div class="top">
Synergy drag link flip kit and weld-on track bar bracket
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/showthread.php?2304-JK-ADVENTURE-COM-s-official-SEMA-build-HAVOC"><img src="http://jk-adventure.com/Articles/Havoc/HAVOC-240.jpg" alt="" />
<div class="top">
JKA's 2011 SEMA build "HAVOC"
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?161-Install-monster-valves%21%21%21"><img src="http://jk-adventure.com/Articles/monstervalve/JKAMONSTERVALVES240.jpg" alt="" />
<div class="top">
Powertank Monster Valve Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?160-TNT-Stubby-Winch-Bumper-install"><img src="http://jk-adventure.com/Articles/tntbumper/tnt240.jpg" alt="" />
<div class="top">
TNT Stinger Front Bumper Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?159-JK-Adventure-com-How-To-Installing-Metal-Cloak-Front-and-Rear-Armor-Fenders"><img src="http://jk-adventure.com/Articles/MetalCloak/MC240.jpg" alt="" />
<div class="top">
Install Metal Cloak Front fenders and Rear armor w/fender
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?158-Demount-and-mount-beadlocks-yourself%21-Do-it-right%21%21%21"><img src="http://jk-adventure.com/Articles/Deedbead_beadlock/JKA%20BEADLOCKS%20240.jpg" alt="" />
<div class="top">
Mount and de-mount beadlocks
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?157-Poison-Spyder-BFH-rear-JK-bumper-install-OR-FAB-Roto-Pax-arm"><img src="http://jk-adventure.com/Articles/Allan%20PS%20Bumper/PSbumper240.jpg" alt="" />
<div class="top">
PS BFH rear JK bumper install w/OR-FAB arm
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?155-Dominion-offroad-Jeepwag-installation-of-NEW-Poly-Ball-Joints"><img src="http://jk-adventure.com/Articles/BallJoints/DOballjoints240.jpg" alt="" />
<div class="top">
Dominion offroad/Jeepwag installation of <br>NEW Poly Ball Joints
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?153-THINKING-ABOUT-COILOVERS-ON-YOUR-JK"><img src="http://jk-adventure.com/Articles/coilovers/coilovers240.jpg" alt="" />
<div class="top">
"Thinking about Coil-overs?" <br>- by JKA's Ryan Bensheimer
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?152-JK-Adventure-com-How-To-River-Raider-Full-Corner-and-ORO-Lite-Dot-Install"><img src="http://www.jk-adventure.com/Articles/RRCorners/RR240.jpg" alt="" />
<div class="top">
RR Full Corner & ORO Lite Dot Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?150-JK-Adventure-com-How-To-Installing-Tom-Woods-JK-Driveshafts"><img src="http://jk-adventure.com/Articles/TomWoodsDS/Driveshafts240.jpg" alt="" />
<div class="top">
Step by Step Tom Woods Driveshaft installation
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?149-JK-Adventure-com-Get-to-Know-Members-Shannon-A-K-A-Yogurt"><img src="http://jk-adventure.com/Articles/GetToKnow/yogurt240.jpg" alt="" />
<div class="top">
Get to Know Members: Yogurt
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?148-JK-Adventure-com-Product-Review-New-Smittybilt-Stubby-Bumper-X20-Winch"><img src="http://jk-adventure.com/ThreadImages/smitty/smitty240.jpg" alt="" />
<div class="top">
New Smittybilt Stubby Bumper & X20 Winch
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?147-007-Secret-Spot"><img src="http://jk-adventure.com/ThreadImages/007/007_240.jpg" alt="" />
<div class="top">
Wheeling 007 "Secret Spot"
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?146-JK-Adventure-com-Wheeling-Log-Truck-Haven-12-5"><img src="http://jk-adventure.com/Articles/truckhaven12-5/truckhaven240.jpg" alt="" />
<div class="top">
Wheeling in Truck Haven
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?145-Sema-2010-Pictures!"><img src="http://jk-adventure.com/Articles/SEMA2010/SEMA240.jpg" alt="" />
<div class="top">
SEMA 2010 Photos
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?142-JK-Adventure-com-Product-Review-Teraflex-Speedbumps-review"><img src="http://jk-adventure.com/Articles/TFSpeedbumpReview/SpeedBumps240.jpg" alt="" />
<div class="top">
Teraflex Speedbump Review
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?143-JK-Adventure-com-How-To-Installing-Teraflex-Speedbumps"><img src="http://jk-adventure.com/Articles/TFSpeedbumpInstall/TFSB240.jpg" alt="" />
<div class="top">
Teraflex Speedbump Installation Guide
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?141-JK-Adventure-com-4Wheeling-News-The-Rockster-by-River-Raider-Offroad"><img src="http://jk-adventure.com/Articles/Rockster/rockster240.jpg" alt="" />
<div class="top">
Latest River Raider Build the "Rockster"
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?139-JK-Adventure-com-Product-Review-Rock-Krawler-s-Steel-and-Aluminum-Tie-Rods"><img src="http://jk-adventure.com/Articles/RKTieRod/tie-rod240.jpg" alt="" />
<div class="top">
Rock Krawler Tie-Rod Review
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?125-JK-Adventure-com-How-To-Changing-your-Differential-Fluid-on-your-Jeep-JK-Dana-44-w-locker"><img src="http://jk-adventure.com/Articles/Diff/Diff240.jpg" alt="" />
<div class="top">
How to change your Diff Fluid (D44)
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?123-De-Beading-a-Tire-with-High-Lift-Jack"><img src="http://jk-adventure.com/Articles/DeBead/DeBead240.jpg" alt="" />
<div class="top">
De-Beading a tire with a High-lift Jack
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?138-JK-Adventure-com-How-To-Changing-your-Jeep-JK-Brake-Pads"><img src="http://jk-adventure.com/Articles/Brakes/pads240.jpg" alt="" />
<div class="top">
How to change your Brake Pads
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?130-JK-Adventure-com-Wheeling-Log-Easter-Jeep-Safari-Moab-2010"><img src="http://jk-adventure.com/Articles/Moab/moab240.jpg" alt="" />
<div class="top">
EJS Moab 2010 wheeling
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?132-JK-Adventure-com-New-Products-HD-Customs-LLC-HD-Switchblade-for-the-Jeep-JK"><img src="http://jk-adventure.com/Articles/Switchblade/switchblade240.jpg" alt="" />
<div class="top">
HD Customs - "Switchblade" bumper
</div>
</li>
</ul>

[almannai]

I love this mod - is there any way to put a <BR> between sidebar blocks?
Yes you can but not sure if the <br> will work between <li>.If not use <li><br></li>
found that when I disable the top block, it works. could you look at my code adn tell me if you see an issue?

This is the block contents:
<style type="text/css">
ul#slider {
width: 240px;
height: 150px;
list-style-type: none;
margin: 0;
padding: 0;
overflow: hidden;
}

ul#slider li {
float: left;
position: relative;
/*display: none;*/
}

ul#slider li div {
position: absolute;
width: 240px;
background-color: #000;
color: #fff;
left: 0;
/*display: none;*/
padding: 10px;
}

.top {
top: 0;
}

.bottom {
bottom: 0;
}
</style>
<script src="js/jquery.js" type="text/javascript"></script>
<script src="js/mySlider.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function() {
$("#slider").mySlider({
timeOut: 6000,
captionOpacity: .7
});
});
</script>
<ul id="slider">

<li>
<a href="http://jk-adventure.com/JKA/content.php?167-JK-Adventure-com-How-To-Install-the-Redneck-Ram-Hydro-Steering-Assist-Kit"><img src="http://jk-adventure.com/Articles/redneckram/redneck240.jpg" alt="" />
<div class="top">
Redneck Ram Install
</div>
</li>


<li>
<a href="http://jk-adventure.com/JKA/content.php?166-JK-Adventure-com-How-To-Install-Synergy-drag-link-flip-kit-and-weld-on-track-bar-bracket"><img src="http://jk-adventure.com/Articles/Synergy/synergy240.jpg" alt="" />
<div class="top">
Synergy drag link flip kit and weld-on track bar bracket
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/showthread.php?2304-JK-ADVENTURE-COM-s-official-SEMA-build-HAVOC"><img src="http://jk-adventure.com/Articles/Havoc/HAVOC-240.jpg" alt="" />
<div class="top">
JKA's 2011 SEMA build "HAVOC"
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?161-Install-monster-valves%21%21%21"><img src="http://jk-adventure.com/Articles/monstervalve/JKAMONSTERVALVES240.jpg" alt="" />
<div class="top">
Powertank Monster Valve Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?160-TNT-Stubby-Winch-Bumper-install"><img src="http://jk-adventure.com/Articles/tntbumper/tnt240.jpg" alt="" />
<div class="top">
TNT Stinger Front Bumper Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?159-JK-Adventure-com-How-To-Installing-Metal-Cloak-Front-and-Rear-Armor-Fenders"><img src="http://jk-adventure.com/Articles/MetalCloak/MC240.jpg" alt="" />
<div class="top">
Install Metal Cloak Front fenders and Rear armor w/fender
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?158-Demount-and-mount-beadlocks-yourself%21-Do-it-right%21%21%21"><img src="http://jk-adventure.com/Articles/Deedbead_beadlock/JKA%20BEADLOCKS%20240.jpg" alt="" />
<div class="top">
Mount and de-mount beadlocks
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?157-Poison-Spyder-BFH-rear-JK-bumper-install-OR-FAB-Roto-Pax-arm"><img src="http://jk-adventure.com/Articles/Allan%20PS%20Bumper/PSbumper240.jpg" alt="" />
<div class="top">
PS BFH rear JK bumper install w/OR-FAB arm
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?155-Dominion-offroad-Jeepwag-installation-of-NEW-Poly-Ball-Joints"><img src="http://jk-adventure.com/Articles/BallJoints/DOballjoints240.jpg" alt="" />
<div class="top">
Dominion offroad/Jeepwag installation of <br>NEW Poly Ball Joints
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?153-THINKING-ABOUT-COILOVERS-ON-YOUR-JK"><img src="http://jk-adventure.com/Articles/coilovers/coilovers240.jpg" alt="" />
<div class="top">
"Thinking about Coil-overs?" <br>- by JKA's Ryan Bensheimer
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?152-JK-Adventure-com-How-To-River-Raider-Full-Corner-and-ORO-Lite-Dot-Install"><img src="http://www.jk-adventure.com/Articles/RRCorners/RR240.jpg" alt="" />
<div class="top">
RR Full Corner & ORO Lite Dot Install
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?150-JK-Adventure-com-How-To-Installing-Tom-Woods-JK-Driveshafts"><img src="http://jk-adventure.com/Articles/TomWoodsDS/Driveshafts240.jpg" alt="" />
<div class="top">
Step by Step Tom Woods Driveshaft installation
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?149-JK-Adventure-com-Get-to-Know-Members-Shannon-A-K-A-Yogurt"><img src="http://jk-adventure.com/Articles/GetToKnow/yogurt240.jpg" alt="" />
<div class="top">
Get to Know Members: Yogurt
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?148-JK-Adventure-com-Product-Review-New-Smittybilt-Stubby-Bumper-X20-Winch"><img src="http://jk-adventure.com/ThreadImages/smitty/smitty240.jpg" alt="" />
<div class="top">
New Smittybilt Stubby Bumper & X20 Winch
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?147-007-Secret-Spot"><img src="http://jk-adventure.com/ThreadImages/007/007_240.jpg" alt="" />
<div class="top">
Wheeling 007 "Secret Spot"
</div>
</li>


<li>
<a href="http://jk-adventure.com/JKA/content.php?146-JK-Adventure-com-Wheeling-Log-Truck-Haven-12-5"><img src="http://jk-adventure.com/Articles/truckhaven12-5/truckhaven240.jpg" alt="" />
<div class="top">
Wheeling in Truck Haven
</div>
</li>

<li>
<a href="http://jk-adventure.com/JKA/content.php?145-Sema-2010-Pictures!"><img src="http://jk-adventure.com/Articles/SEMA2010/SEMA240.jpg" alt="" />
<div class="top">
SEMA 2010 Photos
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?142-JK-Adventure-com-Product-Review-Teraflex-Speedbumps-review"><img src="http://jk-adventure.com/Articles/TFSpeedbumpReview/SpeedBumps240.jpg" alt="" />
<div class="top">
Teraflex Speedbump Review
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?143-JK-Adventure-com-How-To-Installing-Teraflex-Speedbumps"><img src="http://jk-adventure.com/Articles/TFSpeedbumpInstall/TFSB240.jpg" alt="" />
<div class="top">
Teraflex Speedbump Installation Guide
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?141-JK-Adventure-com-4Wheeling-News-The-Rockster-by-River-Raider-Offroad"><img src="http://jk-adventure.com/Articles/Rockster/rockster240.jpg" alt="" />
<div class="top">
Latest River Raider Build the "Rockster"
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?139-JK-Adventure-com-Product-Review-Rock-Krawler-s-Steel-and-Aluminum-Tie-Rods"><img src="http://jk-adventure.com/Articles/RKTieRod/tie-rod240.jpg" alt="" />
<div class="top">
Rock Krawler Tie-Rod Review
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?125-JK-Adventure-com-How-To-Changing-your-Differential-Fluid-on-your-Jeep-JK-Dana-44-w-locker"><img src="http://jk-adventure.com/Articles/Diff/Diff240.jpg" alt="" />
<div class="top">
How to change your Diff Fluid (D44)
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?123-De-Beading-a-Tire-with-High-Lift-Jack"><img src="http://jk-adventure.com/Articles/DeBead/DeBead240.jpg" alt="" />
<div class="top">
De-Beading a tire with a High-lift Jack
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?138-JK-Adventure-com-How-To-Changing-your-Jeep-JK-Brake-Pads"><img src="http://jk-adventure.com/Articles/Brakes/pads240.jpg" alt="" />
<div class="top">
How to change your Brake Pads
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?130-JK-Adventure-com-Wheeling-Log-Easter-Jeep-Safari-Moab-2010"><img src="http://jk-adventure.com/Articles/Moab/moab240.jpg" alt="" />
<div class="top">
EJS Moab 2010 wheeling
</div>
</li>
<li>
<a href="http://jk-adventure.com/JKA/content.php?132-JK-Adventure-com-New-Products-HD-Customs-LLC-HD-Switchblade-for-the-Jeep-JK"><img src="http://jk-adventure.com/Articles/Switchblade/switchblade240.jpg" alt="" />
<div class="top">
HD Customs - "Switchblade" bumper
</div>
</li>
</ul>

I think i know the problem but will it need some coding tweek and testing can't fix it here. If you wish you can submit for a paid support on my website.

[iadventure]

can you give me any clue so I can try to fix it myself?

[sailnet]

I'd like to a blank line between these blocks.

br between </li> and <li>

what template?

[almannai]

I'd like to a blank line between these blocks.



what template?

You need to edit the mod not any template.

[pete_brady]

We have a problem with the hide ability of the sidebar in version 1.5 on our 4.1.10 installation. The user can hide the complete sidebar, but it won't save the hidden stat. As soon as the user reloads or goes to a new page, the sidebar is open again. Any ideas what might be the cause?


same problem here....

[Jakub03]

Is it possible to move down the side bar so it is aligned with the forums?
This is how it looks on the forums right now
http://mypokerhub.com/forumdisplay.php?1-Welcome-to-My-Poker-Hub
https://vborg.vbsupport.ru/external/2012/01/11.png

This is how i want it to look. ( I Photoshoped it here to make it aligned)
https://vborg.vbsupport.ru/external/2012/01/12.png

This is an img of how it looks on a forum without the ESB mod
https://vborg.vbsupport.ru/external/2012/01/13.png

Other than this great mod :) A++

[pete_brady]

Just noticed that the forum blocks generated by


DBTech - Post Thanks Feed
[DavidsMods] vBLive Latest X Streams


don't seem to be appearing when Everywhere Sidebar is used. As far as I recall they were working before it was installed.

[New Joe]

We have a problem with the hide ability of the sidebar in version 1.5 on our 4.1.10 installation. The user can hide the complete sidebar, but it won't save the hidden stat. As soon as the user reloads or goes to a new page, the sidebar is open again. Any ideas what might be the cause?

)
Same problem on 4.1.10, any fix yet?

[scottct1]

I was using the old version fine, but upgraded to the new version on 4.1.10 and now the side bar is not showing up on my templates.

However if I go to the default vbulletin style it works fine there.

What do I need to add to my templates to get this to show up on my custom styles?

Thanks!

[scottct1]

I got it working by going in and downloading the custom style (checking all changes made in the style only.

I then imported the style I just downloaded as a new style and magiclly it started working...

Now however my Tag Cloud Box is not working, it says Empty Style on it. Any ideas on how to get it working again?

[mjfan227]

I got the sidebars up, but how do I get them working with latest threads etc? The forum looks like this:

https://vborg.vbsupport.ru/external/2012/02/48.jpg

[almannai]

I got the sidebars up, but how do I get them working with latest threads etc? The forum looks like this:



First you need to disable "Block Configuration Switch" from the mod options just set it to No

Also nothing will showup if the block is empty try to add some other blocks like tag cloud block for a test

[lapiervb]

I have the same issue with the sidebar not staying closed now..........

[c0der]

thx alot

i will test it latter

[Hummie]

I installed the update last night and now after I collapse the sidebar, when I click to go to another thread or search, it doesn't stay collapsed.

Anxiously awaiting fix. Meanwhile, it's only a bother when I do "new posts" or searches, so I've taken off the replies/views column to make room.

[morrow]

I was using the latest free release with no issue. Today I uninstalled the latest free release and installed the "GOLD" release and now I'm faced with the issue indicated in the attachment.

I'd really like to get this working again on my forum. The settings indicated the attachment have been satisfied on my forum but I did make a few notes on the attachment. Please advise.

Thanks

[morrow]

I just uninstalled the GOLD vversion and re-installed the free version (1.5) and the free version is working while the paid version is not.

Hopefully we can resolve this.

[almannai]

I was using the latest free release with no issue. Today I uninstalled the latest free release and installed the "GOLD" release and now I'm faced with the issue indicated in the attachment.

I'd really like to get this working again on my forum. The settings indicated the attachment have been satisfied on my forum but I did make a few notes on the attachment. Please advise.

Thanks

I just uninstalled the GOLD vversion and re-installed the free version (1.5) and the free version is working while the paid version is not.

Hopefully we can resolve this.

I think you are not using the latest gold version 2.2.2

You can always use the order form if not logged on to get support here
http://vbfixer.com/posting.php?mode=post&f=5
Select others and send your post.

[lapiervb]

Any fix for this yet?

[almannai]

We have a problem with the hide ability of the sidebar in version 1.5 on our 4.1.10 installation. The user can hide the complete sidebar, but it won't save the hidden stat. As soon as the user reloads or goes to a new page, the sidebar is open again. Any ideas what might be the cause?

Hiding blocks within the sidebar works. Oh, and vB complains about the explode() in the sidebarext_temp template :)

same problem here....

Same problem on 4.1.10, any fix yet?

Any fix for this yet?

I know guys, it is annoying thing! I'm still continually updating the gold as so much changes done to the sidebar.js and other files in 4.1.10.
The only fast fix for this untill I update the mod is to force the sidebar to be always open from the mod options.

Sorry everyone
Regards,

[cisoprogressivo]

Same problem here :)
I subscribe the post.

[morrow]

This is what I get when installing the Gold version. See attachment.

[almannai]

This is what I get when installing the Gold version. See attachment.

Pm me your admin login to look at it. Or send a support request here and choose others
http://vbfixer.com/posting.php?mode=post&f=5

You can also try to shrink the sidebar a bit make room for it on the top

[morrow]

I received the new release, Thank you. This seems to have fixed the issue. Thanks again.

[ayam]

edited,

working fine now. conflicting with htaccess rewrite rules

[almannai]

I received the new release, Thank you. This seems to have fixed the issue. Thanks again.

edited,

working fine now. conflicting with htaccess rewrite rules

:) no prob

[coloradomoms]

I've purchased gold and had the other hack "Poll For Forum Sideblock By Ayush" but no matter what I do, the poll won't show up. Is there a way to add the poll to the block?

[almannai]

I've purchased gold and had the other hack "Poll For Forum Sideblock By Ayush" but no matter what I do, the poll won't show up. Is there a way to add the poll to the block?

This been answered before here
https://vborg.vbsupport.ru/showthread.php?p=2255580&highlight=Ayush#post2255580

It is working and here is the proff
http://last24tech.com/forum.php

[coloradomoms]

right, I saw that and made sure I had the lastest versions of everything, saw that site, but it still won't show up. I'm on vb 4.1.10 and downloaded the gold ESB last night. I'll keep tinkering around but wasn't sure if there was a known "Fix" to have it show up.

[coloradomoms]

Ignore me. ;) I finally got it to work. Thanks!!

[deverill2010]

Sorry, I bought the gold version of this and have paid. Where do I download it from?

[almannai]

Sorry, I bought the gold version of this and have paid. Where do I download it from?

If you order it via email you will get it via email.
Also there is a page for the updates you need to register on my site and email me your username to enable your downloads.
Thank you

[almannai]

Ignore me. ;) I finally got it to work. Thanks!!

No prob

[gedsta]

1. I will look into that

2. Please Correct me if 'm wrong: the browsers are smart enough to not download same file again it will use the cached one. This is used for backward compatibility for vb.

Did this ever get fixed? As I am having the same problem on the Gold version.

[w8baby]

i installed latest 1.5, the quick edit post become unusable at all.

i have to disable this plugin for the quick edit to work again

any idea?

[almannai]

i installed latest 1.5, the quick edit post become unusable at all.

i have to disable this plugin for the quick edit to work again

any idea?




To Get Support:
Hit installed link (https://vborg.vbsupport.ru/vborg_miscactions.php?do=installhack&threadid=233871).
You have to put your website link.
If you include a screenshot you will get a better support.
Don't say for example "Doesn't Work" be more descriptive.

[almannai]

Did this ever get fixed? As I am having the same problem on the Gold version.

If you are refering to
"If you store CSS as file it causes an invalid link which produces 404 errors."

I post the answer in your post on my website.

[tommyxv]

Anyone got this working with PhotoPost? I like to have this side on all the PhotoPost pages too.

[moonfox]

OK to upgrade to VB 4.1.10?

[chrisngrod]

OK to upgrade to VB 4.1.10?

Works fine for me...

[sNator]

If I choose to not display the sidebar for a mobilestyle, will the modules still be processed like in vb CMPS?

[mountainlife]

how do you change the width of the sidebar?

[tommyxv]

This code on the forum home is giving off XHTML errors...

<!-- Everywhere Sidebar starts-->
<style>
#content_container{width:100%;float:left;margin-right:-205px;padding:10px 0}
#content_container.contentright{float:right;margin-right:0;margin-left:-205px}
#sidebar_container{float:right;width:185px;padding :17px 0;margin-bottom:3em}
#sidebar_button{display:block;margin-top:40px;float:left;margin-left:-28px;_margin:40px 0 0 0;_display:inline-block}
#sidebar_button{float:right;margin-right:-28px}
.sidebarleft #sidebar_button{float:left;margin-left:-28px;margin-right:0}
</style>


The error are:

Line 2777, Column 7: required attribute "type" not specified
<style>
✉
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

Line 2777, Column 7: document type does not allow element "style" here
<style>
✉
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

[almannai]

If I choose to not display the sidebar for a mobilestyle, will the modules still be processed like in vb CMPS?
The sidebar will be hidden in that style

how do you change the width of the sidebar?
from mod options

This code on the forum home is giving off XHTML errors...

<!-- Everywhere Sidebar starts-->
<style>
#content_container{width:100%;float:left;margin-right:-205px;padding:10px 0}
#content_container.contentright{float:right;margin-right:0;margin-left:-205px}
#sidebar_container{float:right;width:185px;padding :17px 0;margin-bottom:3em}
#sidebar_button{display:block;margin-top:40px;float:left;margin-left:-28px;_margin:40px 0 0 0;_display:inline-block}
#sidebar_button{float:right;margin-right:-28px}
.sidebarleft #sidebar_button{float:left;margin-left:-28px;margin-right:0}
</style>


The error are:

Line 2777, Column 7: required attribute "type" not specified
<style>
✉
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.

Line 2777, Column 7: document type does not allow element "style" here
<style>
✉
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).

What is your site address?

[huskermax]

On a search all I found was admins wanting to disable the minimize function. I want to allow my members to do this. It is set to allow that but each time you refresh or go to another page it comes back. In the previous versions once they selected minimized it stayed that way.

I have the 1.5 version.

Is it a cookie thing?

[almannai]

On a search all I found was admins wanting to disable the minimize function. I want to allow my members to do this. It is set to allow that but each time you refresh or go to another page it comes back. In the previous versions once they selected minimized it stayed that way.

I have the 1.5 version.

Is it a cookie thing?

This prob started after vb 4.1.10 in the standard version you best around this is to force no hidden sidebar

[tommyxv]

What is your site address?

I posted on your site. I'll just continue it there.

[sHORTYWZ]

With 4.1.11, this plugin is causing the sidebar to display below the forum content.

If I uninstall the product, the sidebar displays in the correct area.

Ideas?

[SemperFideles]

With 4.1.11, this plugin is causing the sidebar to display below the forum content.

If I uninstall the product, the sidebar displays in the correct area.

Ideas?

Ditto.

[rm-rf]

Ditto.

Same here. Going to have to disable for now

[espkaruna]

I am also having the same problem. The same phrases seem to be there so I am not sure what about the new version is throwing off the sidebar. Hopefully there will be a fix soon.

[almannai]

With 4.1.11, this plugin is causing the sidebar to display below the forum content.

If I uninstall the product, the sidebar displays in the correct area.

Ideas?

Try to reduce the sidebar width from mod options and see if this fix it.

[espkaruna]

Try to reduce the sidebar width from mod options and see if this fix it.


This does not seem to work (for me anyway). I tried a variety of values for sidebar width, and then played with the top alignment and switching it from right side to left but nothing seems to make any difference. The bar still shows at the same spot below the forums.

[rm-rf]

This does not seem to work (for me anyway). I tried a variety of values for sidebar width, and then played with the top alignment and switching it from right side to left but nothing seems to make any difference. The bar still shows at the same spot below the forums.

Same here still at bottom

[sHORTYWZ]

Try to reduce the sidebar width from mod options and see if this fix it.

As others have said, not working... still showing at the bottom.

[almannai]

Ditto.

Same here. Going to have to disable for now

I am also having the same problem. The same phrases seem to be there so I am not sure what about the new version is throwing off the sidebar. Hopefully there will be a fix soon.

This does not seem to work (for me anyway). I tried a variety of values for sidebar width, and then played with the top alignment and switching it from right side to left but nothing seems to make any difference. The bar still shows at the same spot below the forums.

Same here still at bottom

Don't know guys! it is not clear if it is a style prob or other as you don't provide enough details about your boards.
I've upgraded my board to 4.1.11 without any noticable problem as you can see it here
http://last24tech.com/forum.php

[HenryCell]

my 4.1.11 default sites showing on the bottom and my 4.1.10 sites have no problems

[almannai]

my 4.1.11 default sites showing on the bottom and my 4.1.10 sites have no problems

You need to provide more info
What is your mod version?



To Get Support:

Hit installed link (https://vborg.vbsupport.ru/vborg_miscactions.php?do=installhack&threadid=233871).
You have to put your website link.
If you include a screenshot you will get a better support.
Don't say for example "Doesn't Work" be more descriptive.

[huskermax]

This prob started after vb 4.1.10 in the standard version you best around this is to force no hidden sidebar

Thanks.

[paulp]

Is the "sidebar closed state not persistent" bug already fixed in the gold version? Any ETA on a backport to the free version? :)

[EconomicVoice]

Hi,

I have this excellent product installed (free vers 1.5), but on upgrading to the latest vB version 4.1.11 the sidebar appears at the bottom left of the site above the footer.

I have disabled every plug in and product (inc blog and CMS) except for the Everywhere Sidebar (ESB) and it still appears down there.

I had also previously set my forum to a specific width via the stylevars and have also now reverted those.

I have also played with various ESB settings such as locking it on and loading after etc to no avail.

Any help gratefully received!

[sHORTYWZ]

alamannai -

Plugin version 1.5.0 free, completely default style. When I disable the mod, the sidebar shows up correctly on the right hand side of the forum. The instant I enable the mod, the sidebar shows up underneath all content.

I have tried completely uninstalling and reinstalling the plugin as well with no luck.

Let me know what additional information you need and I'll be happy to help.

[almannai]

Is the "sidebar closed state not persistent" bug already fixed in the gold version? Any ETA on a backport to the free version? :)
Can't tell sorry. Vb team keep us running behinde them with the updates :), no time to check the free version. All the time I have detecated to the payed version for now at least. They've done a major changes to the sidebar can't blame them though! Updating is required by all of us.
What i can promisse is they first chance I got of free time will try to fix these issues in the standard ver.

Hi,

I have this excellent product installed (free vers 1.5), but on upgrading to the latest vB version 4.1.11 the sidebar appears at the bottom left of the site above the footer.

I have disabled every plug in and product (inc blog and CMS) except for the Everywhere Sidebar (ESB) and it still appears down there.

I had also previously set my forum to a specific width via the stylevars and have also now reverted those.

I have also played with various ESB settings such as locking it on and loading after etc to no avail.

Any help gratefully received!

alamannai -

Plugin version 1.5.0 free, completely default style. When I disable the mod, the sidebar shows up correctly on the right hand side of the forum. The instant I enable the mod, the sidebar shows up underneath all content.

I have tried completely uninstalling and reinstalling the plugin as well with no luck.

Let me know what additional information you need and I'll be happy to help.

If anybody having this problem and welling to help, please pm me the admin login of their forum to check it and see how to fix it. The website must using the default style.

[markbu]

I have fixed this myself by adding sidebar.css back into the 'forumhome-rollup.css' section in includes/xml/cssrollup_vbulletin.xml (it was removed in 4.1.11)

(note: I use a very old, very modified version of this plugin - but I would guess this is the problem people are having)

(edit: after doing this you obviously have to recreate the saved css files - eg. open/save additional.css)

[almannai]

I have fixed this myself by adding sidebar.css back into the 'forumhome-rollup.css' section in includes/xml/cssrollup_vbulletin.xml (it was removed in 4.1.11)

(note: I use a very old, very modified version of this plugin - but I would guess this is the problem people are having)

(edit: after doing this you obviously have to recreate the saved css files - eg. open/save additional.css)

Thank you for sharing.

If this is true then people having such problem may start by setting "Store CSS Stylesheets as Files?" to No if this fix it then it is as you said.

[espkaruna]

Thank you for sharing.

If this is true then people having such problem may start by setting "Store CSS Stylesheets as Files?" to No if this fix it then it is as you said.

I can verify that this does work.

[EconomicVoice]

That seems to do the trick! Thanks markbu/almannai.

For those that don't know where this setting is go to options then style & language settings.

[almannai]

Ok Guys This bug is valid in the free AND gold versions so Starting from vb4.1.11 if you want to enable "Store CSS Stylesheets as Files?" you need to upload "cssrollup_everywhere_sidebar.xml" to /includes/xml directory.

[Trevor Matthews]

The sidebar on my forum is now at the bottom left of all forum pages.

I just uploaded that file cssrollup above but I still have the same problem.

Any ideas?

[Trevor Matthews]

Cancel that :D

Just needed to Ctrl F5 each page.

Phew, thats a relief.

[Trevor Matthews]

I am still running Gold 2.0.5
I am unable to log in to your web-site as I can't remember my details.

How can I get the latest Gold version?

[dannycutts]

:I have just uploaded that file and it still doesnt work

:-(

[dannycutts]

ok so once you have uploaded the file, uninstall the everywhere sidebar plugin and then reinstall it :-)

Danny

[laebshade]

ok so once you have uploaded the file, uninstall the everywhere sidebar plugin and then reinstall it :-)

Danny

Disabling then re-enabling the plugin works, too.

[dannycutts]

yep thats probably what i meant :-)

[tommyxv]

Does this fix the XHTML validation errors, and the vb sidebar template saving error?

https://vborg.vbsupport.ru/

[almannai]

Does this fix the XHTML validation errors, and the vb sidebar template saving error?

http://alienowners.com/img/temperror.png

I thought we have discussed this on my website. Why it is so important to you since the mod is running and working fine!!!

[tommyxv]

It's like having a broken gas gauge in your car... sooner or later your gonna get stuck. ;)

You said you would work on fixing the errors in the next update. I see that you just updated it, so I asked if they fixed. :)

[almannai]

It's like having a broken gas gauge in your car... sooner or later your gonna get stuck. ;)

You said you would work on fixing the errors in the next update. I see that you just updated it, so I asked if they fixed. :)

When the mod get stuck I will fix it. Don't worry!!!

[mmllc]

Ok Guys This bug is valid in the free AND gold versions so Starting from vb4.1.11 if you want to enable "Store CSS Stylesheets as Files?" you need to upload "cssrollup_everywhere_sidebar.xml" to /includes/xml directory.


That fixed it.

THANKS!

[pete_brady]

can't get any 3rd party blocks to display in free or gold version, just the built in vB ones.

help?

edit: correction - 3rd party blocks that have their templates in block_* work. Ones that don't, don't.

[Dietrich.Walger]

Hi!

Version 1.5 and 1.4.4.4 does not work on VB 4.0.2

1. sidebar from "Forum Sidebar and Block Options" in admincp - is ON. And without "Everywhere Sidebar" works on Forumhome.

2. Everywhere Sidebar is install and is ON

3. not work and Error: Parse error: syntax error, unexpected '[' in //public_html/forum/includes/class_core.php(4021) : eval()'d code on line 42

[almannai]

Hi!

Version 1.5 and 1.4.4.4 does not work on VB 4.0.2
.................

URL:

http://walger.us/forum/forum.php

vb4.0.2 is too old for 1.5. Try older ESB version like 1.2. You can get earlier versions from my website.

And you need to hit installed to get support.

[Dietrich.Walger]

vb4.0.2 is too old for 1.5. Try older ESB version like 1.2. You can get earlier versions from my website.

Cool! Thank You!

And you need to hit installed to get support.

OK, mark as installed.

[mountainlife]

There is no option like that under the main admin EveryWhere Sidebar (ESB) options to change the sidebar width

?? Please help thanks




The sidebar will be hidden in that style


from mod options



What is your site address?

[tommyxv]

I finally got this mod to pass the XHTML Validator. A couple of tricks, but it passed.....

All the javascript in the sidebarext_temp needs the cdata tag to hide it from the validator. This is a band-aid.

<script type="text/javascript">
//<![CDATA[

java scripts here

//]]>
</script>

And the embedded css was moved out of the sidebarext_temp to the additional.css file.

[almannai]

I finally got this mod to pass the XHTML Validator. A couple of tricks, but it passed.....

All the javascript in the sidebarext_temp needs the cdata tag to hide it from the validator. This is a band-aid.

<script type="text/javascript">
//<![CDATA[

java scripts here

//]]>
</script>

And the embedded css was moved out of the sidebarext_temp to the additional.css file.

You don't give up!! Do you?:D

[tommyxv]

I can sleep better at night now. LOL :D

[pete_brady]

can't get any 3rd party blocks to display in free or gold version, just the built in vB ones.

help?

edit: correction - 3rd party blocks that have their templates in block_* work. Ones that don't, don't.

can anyone else confirm this to be the case?

[tommyxv]

Yeah I think that is correct. I have 2 mods that put their own block in the sidebar but they don't show up.

[p@ndu]

I installed in 4.1.11 with
product-everywhere_sidebar_1.5.zip & cssrollup_everywhere_sidebar.xml

i installed with default skin and without any mods on forum


1. Download plugin. If you are using vb4.1.11 or above download the "cssrollup_everywhere_sidebar.xml" and upload "cssrollup_everywhere_sidebar.xml" to /includes/xml directory.

2. Login to your vBulletin admincp.

3. Open "Plugins & Products", and go to "Manage Products".

4. Click on "[Add/Import Product]".

5. Import the XML file that you download. Make sure you set "allow
overwrite" to "yes".

Optional steps for setting different blocks for different forums and pages:

6. Go to mod options
Admincp->Settings->options->EveryWhere Sidebar (ESB) options

7. Go down until you see "Block Configuration Switch" check "yes" and save.

Followed all these steps but couldnt see on home page

can some one help me

[Trevor Matthews]

Hi
I am still waiting to hear how I can get the updated Gold version as I can't remember my login details to your web-site.

Everywhere Sidebar Gold V2.0.5 stops the 4.1.11 Mobile style from working!!!

I would like to get this updated as soon as possible as I now want to use the mobile style in 4.1.11

Please advise.

[Trevor Matthews]

The mobile style is active at the moment here www.television-magazine-forum.co.uk if you want to see what is going on.
Please let me know when you have viewed the site as I need to turn the style off until this is resolved.