iBardia
01-10-2009, 06:53 PM
Okay, when I reverted my templetes, I got this.
we | | cannot tell you the correct values for the variables | | in this file. | \*-------------------------------------------------------*/ // ****** DATABASE TYPE ****** // This is the type of the database server on which your vBulletin database will be located. // Valid options are mysql and mysqli, for slave support add _slave. Try to use mysqli if you are using PHP 5 and MySQL 4.1+ // for slave options just append _slave to your preferred database type. $config['Database']['dbtype'] = 'mysql'; // ****** DATABASE NAME ****** // This is the name of the database where your vBulletin will be located. // This must be created by your webhost. $config['Database']['dbname'] = 'webkinzc_cadforum'; // ****** TABLE PREFIX ****** // Prefix that your vBulletin tables have in the database. $config['Database']['tableprefix'] = 'webkinzc_'; // ****** TECHNICAL EMAIL ADDRESS ****** // If any database errors occur, they will be emailed to the address specified here. // Leave this blank to not send any emails when there is a database error. $config['Database']['technicalemail'] = ''; // ****** FORCE EMPTY SQL MODE ****** // New versions of MySQL (4.1+) have introduced some behaviors that are // incompatible with vBulletin. Setting this value to "true" disables those // behaviors. You only need to modify this value if vBulletin recommends it. $config['Database']['force_sql_mode'] = false; // ****** MASTER DATABASE SERVER NAME AND PORT ****** // This is the hostname or IP address and port of the database server. // If you are unsure of what to put here, leave the default values. $config['MasterServer']['servername'] = 'localhost'; $config['MasterServer']['port'] = ''; // ****** MASTER DATABASE USERNAME & PASSWORD ****** // This is the username and password you use to access MySQL. // These must be obtained through your webhost. $config['MasterServer']['username'] = 'webkinzc_caduse'; $config['MasterServer']['password'] = 'caduserpw'; // ****** MASTER DATABASE PERSISTENT CONNECTIONS ****** // This option allows you to turn persistent connections to MySQL on or off. // The difference in performance is negligible for all but the largest boards. // If you are unsure what this should be, leave it off. (0 = off; 1 = on) $config['MasterServer']['usepconnect'] = 0; // ****** SLAVE DATABASE CONFIGURATION ****** // If you have multiple database backends, this is the information for your slave // server. If you are not 100% sure you need to fill in this information, // do not change any of the values here. $config['SlaveServer']['servername'] = ''; $config['SlaveServer']['port'] = 3306; $config['SlaveServer']['username'] = 'webkinzc_hi'; $config['SlaveServer']['password'] = 'shutthefup['; $config['SlaveServer']['usepconnect'] = 0; // ****** PATH TO ADMIN & MODERATOR CONTROL PANELS ****** // This setting allows you to change the name of the folders that the admin and // moderator control panels reside in. You may wish to do this for security purposes. // Please note that if you change the name of the directory here, you will still need // to manually change the name of the directory on the server. $config['Misc']['admincpdir'] = 'admincp'; $config['Misc']['modcpdir'] = 'modcp'; // Prefix that all vBulletin cookies will have // Keep this short and only use numbers and letters, i.e. 1-9 and a-Z $config['Misc']['cookieprefix'] = 'bb'; // ******** FULL PATH TO FORUMS DIRECTORY ****** // On a few systems it may be necessary to input the full path to your forums directory // for vBulletin to function normally. You can ignore this setting unless vBulletin // tells you to fill this in. Do not include a trailing slash! // Example Unix: // $config['Misc']['forumpath'] = '/home/users/public_html/forums'; // Example Win32: // $config['Misc']['forumpath'] = 'c:\program files\apache group\apache\htdocs\vb3'; $config['Misc']['forumpath'] = '/home/webkinzc/public_html/forums'; // ****** USERS WITH ADMIN LOG VIEWING PERMISSIONS ****** // The users specified here will be allowed to view the admin log in the control panel. // Users must be specified by *ID number* here. To obtain a user's ID number, // view their profile via the control panel. If this is a new installation, leave // the first user created will have a user ID of 1. Seperate each userid with a comma. $config['SpecialUsers']['canviewadminlog'] = '1,2'; // ****** USERS WITH ADMIN LOG PRUNING PERMISSIONS ****** // The users specified here will be allowed to remove ("prune") entries from the admin // log. See the above entry for more information on the format. $config['SpecialUsers']['canpruneadminlog'] = '1,2'; // ****** USERS WITH QUERY RUNNING PERMISSIONS ****** // The users specified here will be allowed to run queries from the control panel. // See the above entries for more information on the format. // Please note that the ability to run queries is quite powerful. You may wish // to remove all user IDs from this list for security reasons. $config['SpecialUsers']['canrunqueries'] = '2'; // ****** UNDELETABLE / UNALTERABLE USERS ****** // The users specified here will not be deletable or alterable from the control panel by any users. // To specify more than one user, separate userids with commas. $config['SpecialUsers']['undeletableusers'] = ''; // ****** SUPER ADMINISTRATORS ****** // The users specified below will have permission to access the administrator permissions // page, which controls the permissions of other administrators $config['SpecialUsers']['superadministrators'] = '1,2'; // ****** DATASTORE CACHE CONFIGURATION ***** // Here you can configure different methods for caching datastore items. // vB_Datastore_Filecache - to use includes/datastore/datastore_cache.php // vB_Datastore_APC - to use APC // vB_Datastore_XCache - to use XCache // vB_Datastore_Memcached - to use a Memcache server, more configuration below // $config['Datastore']['class'] = 'vB_Datastore_Filecache'; // ******** DATASTORE PREFIX ****** // If you are using a PHP Caching system (APC, XCache, eAccelerator) with more // than one set of forums installed on your host, you *may* need to use a prefix // so that they do not try to use the same variable within the cache. // This works in a similar manner to the database table prefix. // $config['Datastore']['prefix'] = ''; // It is also necessary to specify the hostname or IP address and the port the server is listening on /* $config['Datastore']['class'] = 'vB_Datastore_Memcached'; $i = 0; // First Server $i++; $config['Misc']['memcacheserver'][$i] = '127.0.0.1'; $config['Misc']['memcacheport'][$i] = 11211; $config['Misc']['memcachepersistent'][$i] = true; $config['Misc']['memcacheweight'][$i] = 1; $config['Misc']['memcachetimeout'][$i] = 1; $config['Misc']['memcacheretry_interval'][$i] = 15; */ // ****** The following options are only needed in special cases ****** // ****** MySQLI OPTIONS ***** // When using MySQL 4.1+, MySQLi should be used to connect to the database. // If you need to set the default connection charset because your database // is using a charset other than latin1, you can set the charset here. // If you don't set the charset to be the same as your database, you // may receive collation errors. Ignore this setting unless you // are sure you need to use it. // $config['Mysqli']['charset'] = 'utf8'; // Optionally, PHP can be instructed to set connection parameters by reading from the // file named in 'ini_file'. Please use a full path to the file. // Example: // $config['Mysqli']['ini_file'] = 'c:\program files\MySQL\MySQL Server 4.1\my.ini'; $config['Mysqli']['ini_file'] = ''; // Image Processing Options // Images that exceed either dimension below will not be resized by vBulletin. If you need to resize larger images, alter these settings. $config['Misc']['maxwidth'] = 2592; $config['Misc']['maxheight'] = 1944; /*================================================= =====================*\ || ################################################## ################## || # Downloaded: 20:15, Sat Nov 8th 2008 || # CVS: $RCSfile$ - $Revision: 26534 $ || ################################################## ################## \*================================================ ======================*/
Configuration: includes/config.php exists, but is not in the 3.6+ format. Please convert your config file via the new config.php.new.
It was working until now.
we | | cannot tell you the correct values for the variables | | in this file. | \*-------------------------------------------------------*/ // ****** DATABASE TYPE ****** // This is the type of the database server on which your vBulletin database will be located. // Valid options are mysql and mysqli, for slave support add _slave. Try to use mysqli if you are using PHP 5 and MySQL 4.1+ // for slave options just append _slave to your preferred database type. $config['Database']['dbtype'] = 'mysql'; // ****** DATABASE NAME ****** // This is the name of the database where your vBulletin will be located. // This must be created by your webhost. $config['Database']['dbname'] = 'webkinzc_cadforum'; // ****** TABLE PREFIX ****** // Prefix that your vBulletin tables have in the database. $config['Database']['tableprefix'] = 'webkinzc_'; // ****** TECHNICAL EMAIL ADDRESS ****** // If any database errors occur, they will be emailed to the address specified here. // Leave this blank to not send any emails when there is a database error. $config['Database']['technicalemail'] = ''; // ****** FORCE EMPTY SQL MODE ****** // New versions of MySQL (4.1+) have introduced some behaviors that are // incompatible with vBulletin. Setting this value to "true" disables those // behaviors. You only need to modify this value if vBulletin recommends it. $config['Database']['force_sql_mode'] = false; // ****** MASTER DATABASE SERVER NAME AND PORT ****** // This is the hostname or IP address and port of the database server. // If you are unsure of what to put here, leave the default values. $config['MasterServer']['servername'] = 'localhost'; $config['MasterServer']['port'] = ''; // ****** MASTER DATABASE USERNAME & PASSWORD ****** // This is the username and password you use to access MySQL. // These must be obtained through your webhost. $config['MasterServer']['username'] = 'webkinzc_caduse'; $config['MasterServer']['password'] = 'caduserpw'; // ****** MASTER DATABASE PERSISTENT CONNECTIONS ****** // This option allows you to turn persistent connections to MySQL on or off. // The difference in performance is negligible for all but the largest boards. // If you are unsure what this should be, leave it off. (0 = off; 1 = on) $config['MasterServer']['usepconnect'] = 0; // ****** SLAVE DATABASE CONFIGURATION ****** // If you have multiple database backends, this is the information for your slave // server. If you are not 100% sure you need to fill in this information, // do not change any of the values here. $config['SlaveServer']['servername'] = ''; $config['SlaveServer']['port'] = 3306; $config['SlaveServer']['username'] = 'webkinzc_hi'; $config['SlaveServer']['password'] = 'shutthefup['; $config['SlaveServer']['usepconnect'] = 0; // ****** PATH TO ADMIN & MODERATOR CONTROL PANELS ****** // This setting allows you to change the name of the folders that the admin and // moderator control panels reside in. You may wish to do this for security purposes. // Please note that if you change the name of the directory here, you will still need // to manually change the name of the directory on the server. $config['Misc']['admincpdir'] = 'admincp'; $config['Misc']['modcpdir'] = 'modcp'; // Prefix that all vBulletin cookies will have // Keep this short and only use numbers and letters, i.e. 1-9 and a-Z $config['Misc']['cookieprefix'] = 'bb'; // ******** FULL PATH TO FORUMS DIRECTORY ****** // On a few systems it may be necessary to input the full path to your forums directory // for vBulletin to function normally. You can ignore this setting unless vBulletin // tells you to fill this in. Do not include a trailing slash! // Example Unix: // $config['Misc']['forumpath'] = '/home/users/public_html/forums'; // Example Win32: // $config['Misc']['forumpath'] = 'c:\program files\apache group\apache\htdocs\vb3'; $config['Misc']['forumpath'] = '/home/webkinzc/public_html/forums'; // ****** USERS WITH ADMIN LOG VIEWING PERMISSIONS ****** // The users specified here will be allowed to view the admin log in the control panel. // Users must be specified by *ID number* here. To obtain a user's ID number, // view their profile via the control panel. If this is a new installation, leave // the first user created will have a user ID of 1. Seperate each userid with a comma. $config['SpecialUsers']['canviewadminlog'] = '1,2'; // ****** USERS WITH ADMIN LOG PRUNING PERMISSIONS ****** // The users specified here will be allowed to remove ("prune") entries from the admin // log. See the above entry for more information on the format. $config['SpecialUsers']['canpruneadminlog'] = '1,2'; // ****** USERS WITH QUERY RUNNING PERMISSIONS ****** // The users specified here will be allowed to run queries from the control panel. // See the above entries for more information on the format. // Please note that the ability to run queries is quite powerful. You may wish // to remove all user IDs from this list for security reasons. $config['SpecialUsers']['canrunqueries'] = '2'; // ****** UNDELETABLE / UNALTERABLE USERS ****** // The users specified here will not be deletable or alterable from the control panel by any users. // To specify more than one user, separate userids with commas. $config['SpecialUsers']['undeletableusers'] = ''; // ****** SUPER ADMINISTRATORS ****** // The users specified below will have permission to access the administrator permissions // page, which controls the permissions of other administrators $config['SpecialUsers']['superadministrators'] = '1,2'; // ****** DATASTORE CACHE CONFIGURATION ***** // Here you can configure different methods for caching datastore items. // vB_Datastore_Filecache - to use includes/datastore/datastore_cache.php // vB_Datastore_APC - to use APC // vB_Datastore_XCache - to use XCache // vB_Datastore_Memcached - to use a Memcache server, more configuration below // $config['Datastore']['class'] = 'vB_Datastore_Filecache'; // ******** DATASTORE PREFIX ****** // If you are using a PHP Caching system (APC, XCache, eAccelerator) with more // than one set of forums installed on your host, you *may* need to use a prefix // so that they do not try to use the same variable within the cache. // This works in a similar manner to the database table prefix. // $config['Datastore']['prefix'] = ''; // It is also necessary to specify the hostname or IP address and the port the server is listening on /* $config['Datastore']['class'] = 'vB_Datastore_Memcached'; $i = 0; // First Server $i++; $config['Misc']['memcacheserver'][$i] = '127.0.0.1'; $config['Misc']['memcacheport'][$i] = 11211; $config['Misc']['memcachepersistent'][$i] = true; $config['Misc']['memcacheweight'][$i] = 1; $config['Misc']['memcachetimeout'][$i] = 1; $config['Misc']['memcacheretry_interval'][$i] = 15; */ // ****** The following options are only needed in special cases ****** // ****** MySQLI OPTIONS ***** // When using MySQL 4.1+, MySQLi should be used to connect to the database. // If you need to set the default connection charset because your database // is using a charset other than latin1, you can set the charset here. // If you don't set the charset to be the same as your database, you // may receive collation errors. Ignore this setting unless you // are sure you need to use it. // $config['Mysqli']['charset'] = 'utf8'; // Optionally, PHP can be instructed to set connection parameters by reading from the // file named in 'ini_file'. Please use a full path to the file. // Example: // $config['Mysqli']['ini_file'] = 'c:\program files\MySQL\MySQL Server 4.1\my.ini'; $config['Mysqli']['ini_file'] = ''; // Image Processing Options // Images that exceed either dimension below will not be resized by vBulletin. If you need to resize larger images, alter these settings. $config['Misc']['maxwidth'] = 2592; $config['Misc']['maxheight'] = 1944; /*================================================= =====================*\ || ################################################## ################## || # Downloaded: 20:15, Sat Nov 8th 2008 || # CVS: $RCSfile$ - $Revision: 26534 $ || ################################################## ################## \*================================================ ======================*/
Configuration: includes/config.php exists, but is not in the 3.6+ format. Please convert your config file via the new config.php.new.
It was working until now.