AME 2.0 -Auto Media Embedding for posts, blogs, visitor and group messsages

[Morrus]

And you folder is CHMODed correctly?

Yep, 777.

[Megatr0n]

Will, this hack be updated to be compatible with 3.8 when it goes GOLD?

[Morrus]

Will, this hack be updated to be compatible with 3.8 when it goes GOLD?

it works perfectly on two of my 3.8 boards. Just not the third, although I don't think that's because it's a 3.8 board.

[Megatr0n]

Are you running RC2?

[Morrus]

Are you running RC2?

RC1.

[Nadeemjp]

hello guys.
so far my ame along with DJ's list worked pretty fine.
now i installed blog 2.0.0 and whenever i or someone else tries to comment on someone's blog, we receive an error saying it contradicts with AME modification.

i sought support from vbulletin team but they said they cant support if this modification is installed and that i have to ask it here.

so could someone suggest what could be the problem and how i can get rid of it?

the error i face is as following:

Invalid SQL:
INSERT INTO blog_text
(username, userid, bloguserid, title, pagetext, blogid, allowsmilie, state, dateline, ipaddress, ame_flag)
VALUES
('user name', *, **, '', 'message that was postedi n commments', *, *, 'visible', 1230769617, '2037711588', 2);

MySQL Error : Unknown column 'ame_flag' in 'field list'
Error Number : 1054
Request Date : Wednesday, December 31st 2008 @ 06:26:57 PM
Error Date : Wednesday, December 31st 2008 @ 06:26:58 PM
Script : http://www.familybunker.com/forums/blog_post.php?do=postcomment
Referrer : http://www.familybunker.com/forums/blogs/blogger name/17-chaand.html
IP Address : poster IP address
Username : ***
Classname : vB_Database_MySQLi
MySQL Version : 5.0.51a-community-log

please help me someone:confused::(

[Digital Jedi]

The AME column doesn't exist in your database if you install the Blog AFTER you've install AME. You need to go into your AME Tools menu and click the Add Blog Support link to build that column.

[Nadeemjp]

oh so DJ if i click that add blog thingy then my problem will go away? i dont need to do anything else?

[Digital Jedi]

That should be it.

[gojoe_gojoe]

How can I code HookTV into your definitions. I get lots of request for that site and I got no idea how to code it.

<embed type="application/x-shockwave-flash" src="http://flyfishing.hook.tv/staging/adotube/player/APL.swf" width="530" height="370" bgcolor="#FFFFFF" quality="high" allowFullScreen="true" flashvars="autoStart=0&avid=d1t6143alaff&burl=http%3A%2F%2Fweb1%2Eadotube%2Ecom&csname=Hook%2Etv%20player"></embed>

Here is the URL http://www.hook.tv/player.php?key=D3BC753D8DFD82ED

[Digital Jedi]

How can I code HookTV into your definitions. I get lots of request for that site and I got no idea how to code it.

<embed type="application/x-shockwave-flash" src="http://flyfishing.hook.tv/staging/adotube/player/APL.swf" width="530" height="370" bgcolor="#FFFFFF" quality="high" allowFullScreen="true" flashvars="autoStart=0&avid=d1t6143alaff&burl=http%3A%2F%2Fweb1%2Eadotube%2Ecom&csname=Hook%2Etv%20player"></embed>

Here is the URL http://www.hook.tv/player.php?key=D3BC753D8DFD82ED
It takes a little understanding of Regular Expressions, but there's some good resources in the extended definitions thread for this mod (link is in the Add-On list at the bottom of the first post) if you'd like to learn how.

As I maintain that thread, I'll look into Hook.TV and see if I can't get a definitions made. But since I'm working on so many others in the meantime, you may want to get a head start on me by looking those resources over.

[Nadeemjp]

yeah thanx DJ, it worked:)

[Ironduke]

Can anybody tell me if it's at all possible to get this plugin to rewrite Amazon URLs posted on a forum to include the aStore referral tag, and if it is, instructions on how to do so? I would be very grateful.

[abumohamed]

thank you

[Digital Jedi]

Can anybody tell me if it's at all possible to get this plugin to rewrite Amazon URLs posted on a forum to include the aStore referral tag, and if it is, instructions on how to do so? I would be very grateful.
Look for the media definitions in the Add-On at the bottom of the first post. I have support for the aStore as well as for regular Amazon links that will support your ID tag. Just read over the instructions regarding it in the second post of my thread.

(NOTE: Just a quick note, my aStore definitions is a Thumbnail definition, and not a regular link one. However, I can make one for a future update, it's just never been requested before.)

[Chunkerz]

How do I get my old links from youtube and such to work like the new ones posted since this mod was installed?

[Digital Jedi]

Were you using some kind of embed BBCode or modification before? If you were, you would use the tools in the AME CP to convert the old media codes. If you were not using anything, you can only get those old videos to embed by editing the post.

[Gladhatter]

Were you using some kind of embed BBCode or modification before? If you were, you would use the tools in the AME CP to convert the old media codes. If you were not using anything, you can only get those old videos to embed by editing the post.


Ahhh since I have like 10 post total with uploaded WMP files, then can I assume that this beast will just play them tunes with an edit the post? I just took out the BB code tages for media player as we do not have it in VB but did in phpbb. I hope this will solve my media player problem plus + + and if so I will be thankful.

Put me down as installed if I do not hear this will not fix me by then. Will uninstall then if it does not grow arms and love me better than my wife but less than my son!

Thanks Geek and D.J. for pointing me this way.

[Digital Jedi]

Ahhh since I have like 10 post total with uploaded WMP files, then can I assume that this beast will just play them tunes with an edit the post? I just took out the BB code tages for media player as we do not have it in VB but did in phpbb. I hope this will solve my media player problem plus + + and if so I will be thankful.

Put me down as installed if I do not hear this will not fix me by then. Will uninstall then if it does not grow arms and love me better than my wife but less than my son!

Thanks Geek and D.J. for pointing me this way.
With the Local Hosted Definitions in my Add-On thread, you can play .WMV files hosted on your server. Just as long as they're not attachments.

[Gladhatter]

With the Local Hosted Definitions in my Add-On thread, you can play .WMV files hosted on your server. Just as long as they're not attachments.

Well this is nice as mine are not attachments. Now this brings me to the question if they are attachments fresh uploaded after the install of this product, then can they be played?

[BAD311]

Installed on 3.7.4 just now, uploaded the files to server, imported the xml into plugins and products...

When done, I go to AME CP within my AdminCP, click oN Settings and get:

Not Found
The requested document was not found on this server.

Web Server at (I removed my domain name).

I checked and double checked, and all files are uploaded.

[Cloud_Strife]

How can I put the video in the left instead of the center position? Is that possible?

[Gladhatter]

Well I am doing the "intelligent thing here" and having solidsnake@gti install mine and it will be working in minutes from now.

[Digital Jedi]

Well this is nice as mine are not attachments. Now this brings me to the question if they are attachments fresh uploaded after the install of this product, then can they be played?
No, I'm afraid AME doesn't convert attachments. The URLs for attachments aren't unique enough for AME to distinguish what kind of media it is.


Installed on 3.7.4 just now, uploaded the files to server, imported the xml into plugins and products...

When done, I go to AME CP within my AdminCP, click oN Settings and get:

Not Found
The requested document was not found on this server.

Web Server at (I removed my domain name).

I checked and double checked, and all files are uploaded.
Somethings not in the right place. Did you upload the files one at a time instead of all at once? Have you changed the location of your Admin CP for security reasons?


How can I put the video in the left instead of the center position? Is that possible?
Depends on which version your using. In AME 2.0 just change the Container HTML. In 2.5 you have to change the container template.

[BAD311]

No, I did not change the admincp login, and I deleted all of the files I originally uploaded and then did it manually... Still no go :-(

I'm running vB 3.7.4
and trying to install AEM 2.0.2

[Digital Jedi]

No, I did not change the admincp login, and I deleted all of the files I originally uploaded and then did it manually... Still no go :-(

I'm running vB 3.7.4
and trying to install AEM 2.0.2
Couple of things you can try is re-downloading the ZIP file to make sure it didn't get corrupted during the download. Have you tried navigating directly to automediaembed_admin.php directly from your browser window?

[Gladhatter]

DJ are you adding other sites? Would you be so kind to see about adding www.wimp.com (http://www.wimp.com) specifically I am trying to play: http://www.wimp.com/farylsmith (http://www.wimp.com/farylsmith) whom is a genius 12 y/o gal that has a 200 year old voice.

[Digital Jedi]

I'll add it to the very long list I'm working on, but I will get to checking it over eventually. Hopefully I can do some major catch up today. Keep on eye my definitions thread.

[Gladhatter]

Thank you much. I tried to copy several others and change the pertinent data and I finally got part of a player to show but I could/did not succeed and deleted it but I was close but just do not know any programming code and such so was just guessing.

Please let us know when you release your list. I will certainly wish to import more.

Works great on my local machine files and I love this player.

[Finger78]

I installed this as per the instructions and when I try to make a new post I get an error (with 2.0.2 or 2.5)

Warning: require_once([path]/includes/ame_bbcode.php) [function.require-once]: failed to open stream: No such file or directory in [path]/newthread.php(301) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home2/lefthan5/public_html/angrymob/forums/includes/ame_bbcode.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home2/lefthan5/public_html/angrymob/forums/newthread.php(301) : eval()'d code on line 1

Once I uninstall the product my forums work properly again, any ideas on how to fix this?

Edit

I left all the settings at default outside of making sure the product was enabled.

[Digital Jedi]

I installed this as per the instructions and when I try to make a new post I get an error (with 2.0.2 or 2.5)

Warning: require_once([path]/includes/ame_bbcode.php) [function.require-once]: failed to open stream: No such file or directory in [path]/newthread.php(301) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home2/lefthan5/public_html/angrymob/forums/includes/ame_bbcode.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home2/lefthan5/public_html/angrymob/forums/newthread.php(301) : eval()'d code on line 1

Once I uninstall the product my forums work properly again, any ideas on how to fix this?

Edit

I left all the settings at default outside of making sure the product was enabled.
This is usually caused by a missing file or a file in the wrong location. Did you upload your files one at a time instead of uploading them all at once?

[Finger78]

I uploaded them all at once and separately several times...

Guess third time is the charm, re-upped everything again and all seems ok... is there a button in the editor for the ame code tags or is it a manual enter?

[Gladhatter]

AME CP> Add New Definition (http://www.gladhatter.com/forum/admincp/automediaembed_admin.php?do=edit)

[Digital Jedi]

I uploaded them all at once and separately several times...

Guess third time is the charm, re-upped everything again and all seems ok... is there a button in the editor for the ame code tags or is it a manual enter?
No tags required. Users just post the links to the videos as they would ordinarily. No special effort on their part required. (If you do like I did, I didn't even tell them til several months later)

[Gladhatter]

Sorry thought he was asking where to add new entries. Seems you need to know something about that to make new entries work anyways.

[Finger78]

No tags required. Users just post the links to the videos as they would ordinarily. No special effort on their part required. (If you do like I did, I didn't even tell them til several months later)

When I try to just post a standard link it comes up as a link, only way I get the video to show is to use the [ame] tags

How can I set it up to not require the tags?

[Digital Jedi]

When I try to just post a standard link it comes up as a link, only way I get the video to show is to use the [ame] tags

How can I set it up to not require the tags?
Most common error when this happens is when Disable New Items is not set to No in the AME CP.

[Finger78]

The option is already set to no

[Digital Jedi]

The option is already set to no
Show me an example of a link your using and maybe I can trouble shoot for you.

[Gladhatter]

Show me an example of a link your using and maybe I can trouble shoot for you.


I am sure you are asking me >????

Ok
http://www.wimp.com/farylsmith (http://www.wimp.com/farylsmith)

I hired the solidsnake for 50 projects so far and he has done them all beyond my wildest imaginings and perfect but says this requies some knowlege of regex and he does not have it all.

[Finger78]

Show me an example of a link your using and maybe I can trouble shoot for you.

Just a standard youtube link, nothing fancy

here is an example
http://www.youtube.com/watch?v=xp9Gm-aRe5A

[Digital Jedi]

I am sure you are asking me >????

Ok
http://www.wimp.com/farylsmith (http://www.wimp.com/farylsmith)

I hired the solidsnake for 50 projects so far and he has done them all beyond my wildest imaginings and perfect but says this requies some knowlege of regex and he does not have it all.
Shouldn't be a problem to make a RegEx, but that Javascript might give me some trouble. I'll let you know.


Just a standard youtube link, nothing fancy

here is an example
http://www.youtube.com/watch?v=xp9Gm-aRe5A
Hrm, do you still have a thread available where you tried to post this that I can look at?

[Gladhatter]

Shouldn't be a problem to make a RegEx, but that Javascript might give me some trouble. I'll let you know.





Thank you DJ. The Snake man seems to know JS fine but seems to hate it to the point he nearly refused to work with it.

I appreciate the help on this one.

[Solo Drakban]

I've finally installed this mod and I love it, very nice. I just have one question, is it possible to make the AME content honor the user's image settings? Currently if a user has images off all [img] tags are reverted to URLs but any content embedded by AME remains.

[Finger78]

Hrm, do you still have a thread available where you tried to post this that I can look at?

Not sure why, but it seems to work now, I didnt change any settings from last night. My only guess is that it had something to do with the quick reply feature?

Anyway, all seems ok now, thanks again.

[Digital Jedi]

I've finally installed this mod and I love it, very nice. I just have one question, is it possible to make the AME content honor the user's image settings? Currently if a user has images off all tags are reverted to URLs but any content embedded by AME remains.
Since it doesn't use the IMG tags, it wouldn't be affected by that setting. You could try changing the [I]Replacement HTML for image definitions with BBCode, but I've not tried this and don't know for sure if it would work. I'm thinking it would just post BBCode as text and unparsed. Then there's the fact that this is lighter than BBCode and you'd kind of be regressing.


Not sure why, but it seems to work now, I didnt change any settings from last night. My only guess is that it had something to do with the quick reply feature?

Anyway, all seems ok now, thanks again.
Shouldn't have affected the way the link was parsed, but it's possible it had something to do with the cache.

[Solo Drakban]

Since it doesn't use the IMG tags, it wouldn't be affected by that setting. You could try changing the Replacement HTML for image definitions with BBCode, but I've not tried this and don't know for sure if it would work. I'm thinking it would just post BBCode as text and unparsed. Then there's the fact that this is lighter than BBCode and you'd kind of be regressing.

I realize it doesn't use [img] tags, what I'm saying is that it should still honor that particular setting from the UserCP or add another option to disable the display of AME objects separately. There is no point in disabling images if a giant YouTube or The Onion view preview pane loads up because somebody embedded it. There should be a way for the user to disable the embedded objects just like there is a way for them to disable just able every other media tag in vB. :)

I haven't poked around into the AME system much yet but I assume this would be a simple matter of adding some extra logic into the code hooked into the bbcode parser.

[Preech]

I am ready to update my site to vB 3.7.5. Will this still function once my update is complete.

[Digital Jedi]

I realize it doesn't use [img] tags, what I'm saying is that it should still honor that particular setting from the UserCP or add another option to disable the display of AME objects separately. There is no point in disabling images if a giant YouTube or The Onion view preview pane loads up because somebody embedded it. There should be a way for the user to disable the embedded objects just like there is a way for them to disable just able every other media tag in vB. :)

I haven't poked around into the AME system much yet but I assume this would be a simple matter of adding some extra logic into the code hooked into the bbcode parser.
Your wanting to block all the embedding based on a users image settings? I thought you were just referring to images. If your using AME 2.5 you can try using the conditionals to achieve that end, since the containers are template based in that version, keeping in mind the limitations of conditionals as laid out in the initial post.


I am ready to update my site to vB 3.7.5. Will this still function once my update is complete.
Should be functional on all version of 3.7.

[Solo Drakban]

Your wanting to block all the embedding based on a users image settings? I thought you were just referring to images. If your using AME 2.5 you can try using the conditionals to achieve that end, since the containers are template based in that version, keeping in mind the limitations of conditionals as laid out in the initial post.

Those conditionals won't work as they are cached according to the OP. Where does the magic occur for AME? I've tried poking around but there doesn't appear to be any obvious spots that it hooks into in order to do the parsing of the [ame] tags. There has to be something I can wrap an if( ->userinfo["showimages"] == true ) { } around to stop the media from embedding. Even better would be if( ->userinfo["showimages"] != true ) { do whatever to get the [url] stuff from a quote/edit } else { embed }

Edit: Hrm, I just found ame_bbcode.php and am going to start poking around in there. Previously I was just looking at the plugins and where they hooked.. :)

[Digital Jedi]

Those conditionals won't work as they are cached according to the OP. Where does the magic occur for AME? I've tried poking around but there doesn't appear to be any obvious spots that it hooks into in order to do the parsing of the [ame] tags. There has to be something I can wrap an if( ->userinfo["showimages"] == true ) { } around to stop the media from embedding. Even better would be if( ->userinfo["showimages"] != true ) { do whatever to get the [url] stuff from a quote/edit } else { embed }

Edit: Hrm, I just found ame_bbcode.php and am going to start poking around in there. Previously I was just looking at the plugins and where they hooked.. :)
Let me know what you find.

[gushil]

installed :D

[JJ the Fox]

Does this work on 3.8?

[teamxcm]

I just installed AME 2.0.2 (or so i think, the latest non beta version anyhow) on my vbulletin 3.7.5 install with vbadvanced and vbseo. Now the problem i am having is the rss feeds, its putting the link to the video but the code is messed up. I'm sure theres an easy fix for it or its a setting i'm overlooking, but i figured i'd ask here first. If i have to i can disable the rss feeds to those forums, but i'd rather see if there some way of fixing it otherwise. To view the rss problem you can goto the following url: http://www.teamxcm.com/forums/external.php?forumids=13

Or if i can include a pic i will do so here. Thanks again for your time :)

[Digital Jedi]

I just installed AME 2.0.2 (or so i think, the latest non beta version anyhow) on my vbulletin 3.7.5 install with vbadvanced and vbseo. Now the problem i am having is the rss feeds, its putting the link to the video but the code is messed up. I'm sure theres an easy fix for it or its a setting i'm overlooking, but i figured i'd ask here first. If i have to i can disable the rss feeds to those forums, but i'd rather see if there some way of fixing it otherwise. To view the rss problem you can goto the following url: http://www.teamxcm.com/forums/external.php?forumids=13

Or if i can include a pic i will do so here. Thanks again for your time :)
Ordinarily it should just post the link to the video: http://www.cogonline.net/forums/external.php?forumids=146. But then, I'm using RSS2 enclosure, but I don't know if that would make a difference.

[teamxcm]

It sorts posts a link to the video, if you hover the <font... link it shows in the bottom of the browser the actual url, and i'm assuming if you clicked it, you'd be directed to that url, but the link on the rss page is just being displayed wierd. I'll see if changing the rss type will make a difference. That is if i can find the setting :/

[teamxcm]

Hrmm i have no idea how to change the datatype to rss2. I'll do a search and see if i can find anything.

[Digital Jedi]

Should be in your vB Options >>> External Data Provider

[teamxcm]

I enabled podcasting, which seems to be the rss2 feature, but nothing has changed. Not sure what to do to fix this. Its still a great mod, but i may have to find out how to disable rss from certain forums where videos will be posted :/

[Nadeemjp]

is it 3.8 compatible?

[Ville]

is it 3.8 compatible?I just upgraded to 3.8 and AME 2.0.2 seems to be working fine with it. :)

[Aeolian]

great mod :)
just wondering if it is possible to show the video links like this-mod (https://vborg.vbsupport.ru/showthread.php?t=165505)
also need to be in per with vb 3.8 - like picture comment link parse..
cheers!

[Gladhatter]

Well I can get all of the sites to work on 3.8 except: http://www.wimp.com/farylsmith (http://www.wimp.com/farylsmith) Dag Nab it :erm:

[toneloc]

I just installed 2.02 and I have vBulletin 3.6.4 on my boards.

If I try to create a new thread or post a reply to any thread in any forum, I get a WARNING and FATAL ERROR message.

I also have vbSEO installed.

How can I fix this so that I can use this mod?

Thanks!

[Jeffler]

Unless FaceBook provide embed capability, which I've not been able to find, there won't be one. However, it's difficult to find FaceBook videos, so I've not been able to tell if they do globally or on a case by case basis. They don't list them anywhere, and none of my friends have any uploaded.

Heres an example of the code, I really want someone to figure it out, so here :P

<object width="576" height="324" ><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://www.facebook.com/v/56456504851" /><embed src="http://www.facebook.com/v/56456504851" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="576" height="324"></embed></object>

[Ricsca]

vbulletin 3.8.x dont work...

[beduino]

vbulletin 3.8.x dont work...

What don't work? You've installed before and after upgrade don't works? or is a new install??

tks

[Gladhatter]

Works and works grand and great and 100% of the time without failing.

[Gladhatter]

Now about this AME, I am not sure if the one song at: http://www.gladhatter.com/main/showthread.php?p=17132#post17132 Played on 3.74 or not as I never tried it but I had to rename it as it was originally Where's_the_love_.mp3 and I took out the _s and still no workie and I took out the ' and it worked then fine. Some how the Ame does not see the ' or cannot read it or such. It would show up as a player but would not run the slider or play. Does now however.

[PET]

Hello,

I installed this on a new vBulletin 3.8.0 version. Also, the new version was an import from a phpBB2 forum.

I had some problems. I installed it like 3 times. Once I don't think it placed a thread prefix and I got a mysql error when trying to change settings, but now it works just fine. My errors could be from the stupid server.

So for me this works for 3.8.0 as a NEW install. I also manage to update ALL the old youtube links.

[Digital Jedi]

I just installed 2.02 and I have vBulletin 3.6.4 on my boards.

If I try to create a new thread or post a reply to any thread in any forum, I get a WARNING and FATAL ERROR message.

I also have vbSEO installed.

How can I fix this so that I can use this mod?


Thanks!
Shouldn't be your SEO, as quite a few folks have an SEO with this running on thier forums succesfully. Could you copy/paste the actuall error message?


Heres an example of the code, I really want someone to figure it out, so here :P

<object width="576" height="324" ><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://www.facebook.com/v/56456504851" /><embed src="http://www.facebook.com/v/56456504851" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="576" height="324"></embed></object>
Thanks, I've only started spending a little more time on FaceBook myself, so I'll add this to the list of updates to look over.


vbulletin 3.8.x dont work...
I'm running it fine on my demo board and so are some others. Double check your settings and your installation.


Now about this AME, I am not sure if the one song at: http://www.gladhatter.com/main/showthread.php?p=17132#post17132 Played on 3.74 or not as I never tried it but I had to rename it as it was originally Where's_the_love_.mp3 and I took out the _s and still no workie and I took out the ' and it worked then fine. Some how the Ame does not see the ' or cannot read it or such. It would show up as a player but would not run the slider or play. Does now however.
Yeah, I don't think single quotes are included in the RegEx. It can be added though.

[Gladhatter]

In my case it was just an appositive and not even a single quote pair as part of a possive name however I am sure the computer does not read that well but then mine reads better than me.

I do not know a regEX from a Regedit that I know quite well as we are old friends. I suppose it would behove me to learn what this is but it may be to do with programing that I shall not learn.

[Gladhatter]

Now I know a bit more of what RegEX is. :: http://regexlib.com/

Thank you for the oppertunity to learn.

[Digital Jedi]

You should be able to get links like that to embed by adding the character to this group: [\w/'&;%-\.]+

I didn't design the local hosted, so those defs are probably due to be updated.

[Gladhatter]

Well wonderful then how do I fix the wimp.com one ?

[Digital Jedi]

I'd have to sit and take a look at that one. I have a rather large back logged list of requests.

[Gladhatter]

Well sure am glad that I am so important to not go into backlog and you will do that right away :)

[edefauler]

Hello,

i have installed vbulletin 3.8 and AME 2.5 RC1 an DJ Files .
Many Videos ich can see in the threads but i dont can show Clifish Videos :-(

So i see that, the code for Clipfis is old.
In the definition http://www\.clipfish\.[de|co\.uk]+/player\.php\?videoid\=([\d\w%]+)[&\w;=\+_-]*

but the videos from Clipfish have the code --> http://www.clipfish.de/video/VideoNumber

you can change the definition ? Or what must i do to see the Videos ?

Norbert

[Chicago_VLNU_4s]

wow, nice... will be installing this once I upgrade.

[Digital Jedi]

Hello,

i have installed vbulletin 3.8 and AME 2.5 RC1 an DJ Files .
Many Videos ich can see in the threads but i dont can show Clifish Videos :-(

So i see that, the code for Clipfis is old.
In the definition http://www\.clipfish\.[de|co\.uk]+/player\.php\?videoid\=([\d\w%]+)[&\w;=\+_-]*

but the videos from Clipfish have the code --> http://www.clipfish.de/video/VideoNumber

you can change the definition ? Or what must i do to see the Videos ?

Norbert
For me to update ClipFish, I would need someone to help me out, as ClipFish.de and ClipFish.co.uk now block my country from viewing. I would need two things.

Ten video URLs
Their corresponding Embed Codes as provided by the sites.

I could than update the definition, but I would need someone to test the URLs to make sure their working properly.

[edefauler]

Hello

ich can only speak for Clipfish.de other Domains i dont testing.

But the testeing ist not the problem!

When you need, i give you admin access for my test Site

http://vb.dukecity.de


Norbert

[edefauler]

i testet on my side with this code

http://www.clipfish.de/video/*

<object classid='clsid:d27cdb6e-ae6d-11cf-96b8-444553540000' codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="$ameinfo[width]" height="$ameinfo[height]" id="player" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="http://www.clipfish.de/videoplayer.swf?as=0&videoid=$p1" />
<param name="wmode" value="transparent">
<param name='quality' value="high" />
<param name="bgcolor" value="#999999" />
<embed src="http://www.clipfish.de/videoplayer.swf?as=0&videoid=$p1" quality="high" bgcolor="#999999" width="$ameinfo[width]" height="$ameinfo[height]" name="player" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage='http://www.macromedia.com/go/getflashplayer'>
</embed>
</object>

i can see the clipfish window but i dont ca see the video

Norbert

[Gladhatter]

DJ I will trade you 10 clipfish for 1 wimp.....

Seriously, while I do not know a clip fish from a cat fish if you need these and do not get them send me instructions and I will be sure to get them for you and send them to you.

[ebed146]

Don't have any questions but just dropping in to say thanks for your help and help with this mod. Really appreciate it!

Dan

[atakanson]

I can see the videos in firexox but in explorer there is no video or link?
Is there any solution for this..

[Digital Jedi]

I can see the videos in firexox but in explorer there is no video or link?
Is there any solution for this..
There's no reason they should be working in one or not the other. Are you using the updated set of definitions from my thread?

[RGVFMod]

I installed the 2.0 on my 3.7.2. I installed the forum files onto the server, but when I import the ame.xml, I cannot create new threads. Am I missing something.

This is what I'm getting when I try to create a thread.

Warning: require_once([path]/includes/ame_bbcode.php) [function.require-once]: failed to open stream: No such file or directory in [path]/newthread.php(301) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home/forumcom/public_html/includes/ame_bbcode.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/forumcom/public_html/newthread.php(301) : eval()'d code on line 1

Thanks in advance.

[Digital Jedi]

I installed the 2.0 on my 3.7.2. I installed the forum files onto the server, but when I import the ame.xml, I cannot create new threads. Am I missing something.

This is what I'm getting when I try to create a thread.

Warning: require_once([path]/includes/ame_bbcode.php) [function.require-once]: failed to open stream: No such file or directory in [path]/newthread.php(301) : eval()'d code on line 1

Fatal error: require_once() [function.require]: Failed opening required '/home/forumcom/public_html/includes/ame_bbcode.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/forumcom/public_html/newthread.php(301) : eval()'d code on line 1


Thanks in advance.
Make sure you uploaded all your files. They should have been uploaded all at once in order to have been put in the proper directories.

[RGVFMod]

3 questions.

1. Should I delete the folder files I uploaded and reload them?

2. Will I create a "forums" directory in the root directory that has all three folder, or will I be transferring the 3 folders to the root directory?

3. Does the [ youtube ] tag I have installed have anything to do with this?

[Digital Jedi]

3 questions.

1. Should I delete the folder files I uploaded and reload them?

2. Will I create a "forums" directory in the root directory that has all three folder, or will I be transferring the 3 folders to the root directory?

3. Does the [ youtube ] tag I have installed have anything to do with this?
1. No, just re-up them for now.

2. You should transfer them to your forum root. He just puts them in a folder called forums for the convenience of those of us who happen to have our forum set up that way. But admincp, includes, images, all those folders should be overwritten onto your existing ones.

3. Shouldn't be causing any problems unless someone tries to use them to post a YouTube video.

[smirkley]

Still love this mod,...

Just installed AME 2.5 on my new setup with vB3.8.

Noticed an error while doing the following,...

Database errors, when using (Tools - Rebuild) for vbBlogs, group messages, visitor messages or signatures.

Using this feature for posts seems to work good.

I have,..

vB Forum 3.8.0 G
Blogs 2.0 G

Basically I think the vB3.0 and BVlog2.0 seem to be the issue, as blogs, social groups are the big sql db error providers.

Thanks again.

[Digital Jedi]

Still love this mod,...

Just installed AME 2.5 on my new setup with vB3.8.

Noticed an error while doing the following,...

Database errors, when using (Tools - Rebuild) for vbBlogs, group messages, visitor messages or signatures.

Using this feature for posts seems to work good.

I have,..

vB Forum 3.8.0 G
Blogs 2.0 G

Basically I think the vB3.0 and BVlog2.0 seem to be the issue, as blogs, social groups are the big sql db error providers.



Thanks again.
Were Blogs, Visitor Messages and Social Groups a part of your forum prior to upgrading to 3.8? Because the only time you would run the rebuild tool for one of these functions is if you had AME installed first, and then you upgraded vB to those features. If AME is added after you already have these features, then the tables would have already been added during the initial installation.

[smirkley]

Were Blogs, Visitor Messages and Social Groups a part of your forum prior to upgrading to 3.8? Because the only time you would run the rebuild tool for one of these functions is if you had AME installed first, and then you upgraded vB to those features. If AME is added after you already have these features, then the tables would have already been added during the initial installation.


I have had blogs installed while I succesfully used the 2.0 version of AME and using 3.7.5, and prior 3.7.4 vb.

I upgraded to blog2.0 when it became available, and it was still ok.

And social groups has been a built in feature of vb since before 3.4, but recently upgraded in 3.8.



It was with the install of AME 2.5 today, that I had to use the un-build rebuild feature of AME to re-embed the google urls properly for the ame2.5 upgrade, when I noticed this problem with the database, when using this tool on blogs and social groups.

Any help appreciated. Thanks again.

[7lanet]

Why is not the name of all video

Only some video

[Digital Jedi]

I have had blogs installed while I succesfully used the 2.0 version of AME and using 3.7.5, and prior 3.7.4 vb.

I upgraded to blog2.0 when it became available, and it was still ok.

And social groups has been a built in feature of vb since before 3.4, but recently upgraded in 3.8.



It was with the install of AME 2.5 today, that I had to use the un-build rebuild feature of AME to re-embed the google urls properly for the ame2.5 upgrade, when I noticed this problem with the database, when using this tool on blogs and social groups.

Any help appreciated. Thanks again.
If you already had Blogs and Social Groups prior to installing AME, then you shouldn't have needed to run either of those process. What was the problem with Google that you needed to run the rebuild tool?

Why is not the name of all video

Only some video
I'd have to see the actual YouTube links to tell you why.

[theothersully]

Ok, I've installed this mod because I couldn't get custom BB code to work for YouTube videos.

I kept getting nothing - a blank when using the custom BB code.

Now, using this mod, I get the title of the video in a nice little title bar over... you guessed it!

NOTHING.

YouTube videos will not display on my 3.7 vBulletin installation.

What is up here?? Does anyone know why I can't show any videos on my site? Embedded images work just fine. Embedded videos don't.

Please help... my users are going to kill me! ha ha

[Digital Jedi]

Have you checked all your settings closely? Most common mistake folks make is to Disable New Items set to Yes in their AME CP Settings.

[smirkley]

If you already had Blogs and Social Groups prior to installing AME, then you shouldn't have needed to run either of those process. What was the problem with Google that you needed to run the rebuild tool?


My mistake, I meant YouTube links.

1 - I installed the AME2.5 after everything else was up and running, but I noticed after the 2.5 install, that all the old AME links were now left in posts as just ame bbcode with urls.
They would work if I edited individual posts, but not on their own.

2 - Then I used the unbuild tool to remove the old ame links and revert them to url bbcode, and then rebuilt using same tool, which on its own process correctly made all youtube links properly render in the ame style. This was all good. Everything worked as expected.

3 - then because I had similar broken ame links in my blogs, I tried to do the same with blogs, but when I click on the rebuild tool in the ame cp, I get a database error instead, tried also with social groups, even though my social groups had no ame or youtube links to embed, but it didnt matter, same database error.

It worked as expected with just the regular forum posts, but only thing I could think of was the blogs and social groups were recently upgraded, but the ame code isnt setup to address the database of the new versions properly.

And yes, sorry, I meant youtube and not google in my prior post.

And yes, maybe I needent run the process with my social groups, but should the ame cp provde database errors anyway? I did need to run them for blogs though.

Thanks

[Digital Jedi]

My mistake, I meant YouTube links.

1 - I installed the AME2.5 after everything else was up and running, but I noticed after the 2.5 install, that all the old AME links were now left in posts as just ame bbcode with urls.
They would work if I edited individual posts, but not on their own.

2 - Then I used the unbuild tool to remove the old ame links and revert them to url bbcode, and then rebuilt using same tool, which on its own process correctly made all youtube links properly render in the ame style. This was all good. Everything worked as expected.

3 - then because I had similar broken ame links in my blogs, I tried to do the same with blogs, but when I click on the rebuild tool in the ame cp, I get a database error instead, tried also with social groups, even though my social groups had no ame or youtube links to embed, but it didnt matter, same database error.

It worked as expected with just the regular forum posts, but only thing I could think of was the blogs and social groups were recently upgraded, but the ame code isnt setup to address the database of the new versions properly.

And yes, sorry, I meant youtube and not google in my prior post.

And yes, maybe I needent run the process with my social groups, but should the ame cp provde database errors anyway? I did need to run them for blogs though.

Thanks
That's what I'm saying, there is no individual setting for rebuilding links in blogs. Convert codes should do that for everything. Add Blog Support simply adds the missing colums to your database if you added your Blog AFTER you installed AME, which may be why your getting the database error (though I cant seem duplicate this).

It's possible maybe The Geek overlooked including the secondary areas when you run Convert, but I would think so. What you should try is reuploading all your files and making sure that when you upgraded you ticked the Allow overwrite to Yes. First, though, can you paste the exact database error your getting? It's in the source code.

[smirkley]

That's what I'm saying, there is no individual setting for rebuilding links in blogs. Convert codes should do that for everything.


But in the v2.5 that I recently downloaded a couple of days ago there is,..

In the AME admin cp > tools page,..this is what I have at the very top...



Rebuild
Convert (or remove) AME code in your old posts, vbBlogs, group messages, visitor messages or signatures.

...with the underlined phrases being linked to the particular rebuild tool.

I am not sure I follow you, or that we are talking about the same feature version of AME at this point.

Thanks again

[Gladhatter]

Rebuild
Convert (or remove) AME code in your old posts, vbBlogs, group messages, visitor messages or signatures.
...with the underlined phrases being linked to the particular rebuild tool.

and stupid Gladhatter ask here only if you have checked those links to see if they all point to same place or differnt one?

And edits post to say they are all differnet as I just checked.

[Digital Jedi]

But in the v2.5 that I recently downloaded a couple of days ago there is,..

In the AME admin cp > tools page,..this is what I have at the very top...



...with the underlined phrases being linked to the particular rebuild tool.

I am not sure I follow you, or that we are talking about the same feature version of AME at this point.

Thanks again
Hrm, looks like I didn't have that for some reason. I believe I had a development version The Geek had sent me a while back still installed. Okay, my fault. Let's see, did you run these in test and verbose mod first and not run into any problems?

[smirkley]

Hrm, looks like I didn't have that for some reason. I believe I had a development version The Geek had sent me a while back still installed. Okay, my fault. Let's see, did you run these in test and verbose mod first and not run into any problems?

The fault shows up in test or not test.

vbBlogs produce:
Fatal error: Call to a member function hide_errors() on a non-object in /home/xxxxxxxx/public_html/admincp/automediaembed_admin.php on line 70


Group messages produce:
Fatal error: Call to a member function hide_errors() on a non-object in /home/xxxxxxxx/public_html/admincp/automediaembed_admin.php on line 90


Visitor messages produce:
Fatal error: Call to a member function hide_errors() on a non-object in /home/xxxxxxxx/public_html/admincp/automediaembed_admin.php on line 111


Signatures produce:
Database error in vBulletin 3.8.0:

Invalid SQL:
SELECT count(userid) total FROM usertextfield WHERE 1=1 AND (signature LIKE '%[/url]%' OR signature LIKE '%[/ame]%' OR pagetext LIKE '%[/nomedia]%');

MySQL Error : Unknown column 'pagetext' in 'where clause'
Error Number : 1054
Request Date : Friday, January 16th 2009 @ 11:23:34 PM
Error Date : Friday, January 16th 2009 @ 11:23:34 PM
Script : http://www.xxxxxxxxxxxx.com/admincp/automediaembed_admin.php?do=dorebuild&deleteame=0&ignoreprevious=1&test=1&verbose=0&length=0&perpage=100&seconds=10&zone=sig
Referrer : http://www.xxxxxxxxxxxxxx.com/admincp/automediaembed_admin.php?do=rebuild&zone=sig
IP Address : xxxxxxxxxxxx
Username : xxxxxxxxx
Classname : vB_Database
MySQL Version : 5.0.67-community-log


posts produce expected results as explained above.

xxxxxxxxxxx replace domain name but replaced for the purpose of this post

[Digital Jedi]

Hrm, I would try reinstalling AME again, as you seem to be getting errors on the check to see if everything is installed. Re-upload the files and then reinstall AME the same way you would do as if doing an upgrade and see if it inserts the proper tables this time. Remember that your definitions will be reset to the default set.

[smirkley]

OK, did a full reinstall, and same end result.

I dont think the install is the issue atm.

[Nadeemjp]

this is a wonderful modification.
i was just wondering if it is possible to launch this officially in 3.8 as well so that i dont have to come in here again.

it is working though with 3.8 @ my forums.

[Digital Jedi]

OK, did a full reinstall, and same end result.

I dont think the install is the issue atm.
I've seen this error once before, but it wasn't corrected publicly in this thread. So I'm not sure if they found a solution. The only thing I can think of at this point is that you've got a conflicting modification or the remnants of one. Have tried disabling all your modifications one by one to see if anything changes?

this is a wonderful modification.
i was just wondering if it is possible to launch this officially in 3.8 as well so that i dont have to come in here again.

it is working though with 3.8 @ my forums.
It just depends on when The Geek has time to come back to the forums again.

[Gladhatter]

I hope to take time to learn the regex libs soon if it is in my grasp as I have found that the few sites I find or are sent to me are not suitable for it yet.

[The Geek]

OK, did a full reinstall, and same end result.

I dont think the install is the issue atm.
Let me first start by apologising for my sporadic attendance here, however my rl zaps most of my free time now and I have less time to code and/or support this project. Let me then follow up by again thanking DJ for his tireless support of this mod. If it wasn't for his support, I am sure most would agree that this mod would be as dead as a doornail (whatever the hell a dead doornail is).

Smirkley, I do seem to recall that the last 2.5 release had an issue with conversions of old blogs, social group and visitor messages. IIRC, I think I had it resolved on a local development build, however I am not keen to simply zip up what is on my dev server without really spending the time to comb back through the code to ensure there are not any loose ends left undone (its been months since I have worked on it).

The problem was that the tool would give a db error trying to do conversions of old data and no changes would be made. It in no way affected the underlying data (but of course it wouldn't convert old info into ame's either!). The rest of the system works hunky dory. New visitor messages, blog posts, etc... worked fine... (as well as edited ones) just not the conversions of old data using that particular tool.

I will try to set some time aside over the next week or so to comb back through the code and see if I can get a final release into the 3.8 forum (yes, this indeed works on 3.8). Until then, know that the system works fine - there just isn't a working tool to automatically convert old blogs, social messages and visitor messages.

[Gladhatter]

Let me first start by apologising for my sporadic attendance here, however my rl zaps most of my free time now and I have less time to code and/or support this project. Let me then follow up by again thanking DJ for his tireless support of this mod. If it wasn't for his support, I am sure most would agree that this mod would be as dead as a doornail (whatever the hell a dead doornail is).

.

Geek, I am also wishing to thank DJ and yourself and your devotion to life as well as this program. I wish to assure you for what it is worth that your work has added flavor to my life and even affored me a pleasurable day of music and a day off of RL just yesterday. It is a huge hit on our fledgling forum and getting better. I am listing to music as I type this in fact and am ever so appreciative.

I wish to add to the "usless knowledge base" for you. A door nail is that nail that is used in the top or door of an old time wooden coffin and thus the association of death.

While probably not originating in the original bird flu pandemic during WWI it certainly gained poplar usage there when often was the case in these parts that there was not enough living in communites to bury the dead. But I digress and yet again I wish to thank you for your finest code.

Should you decide at some point to drop it, I will likely hire help if possible to continue it.

[Digital Jedi]

Let me first start by apologising for my sporadic attendance here, however my rl zaps most of my free time now and I have less time to code and/or support this project. Let me then follow up by again thanking DJ for his tireless support of this mod. If it wasn't for his support, I am sure most would agree that this mod would be as dead as a doornail (whatever the hell a dead doornail is).

Smirkley, I do seem to recall that the last 2.5 release had an issue with conversions of old blogs, social group and visitor messages. IIRC, I think I had it resolved on a local development build, however I am not keen to simply zip up what is on my dev server without really spending the time to comb back through the code to ensure there are not any loose ends left undone (its been months since I have worked on it).

The problem was that the tool would give a db error trying to do conversions of old data and no changes would be made. It in no way affected the underlying data (but of course it wouldn't convert old info into ame's either!). The rest of the system works hunky dory. New visitor messages, blog posts, etc... worked fine... (as well as edited ones) just not the conversions of old data using that particular tool.
Ah, thanks Geek. I was running out of ideas. :D

I will try to set some time aside over the next week or so to comb back through the code and see if I can get a final release into the 3.8 forum (yes, this indeed works on 3.8). Until then, know that the system works fine - there just isn't a working tool to automatically convert old blogs, social messages and visitor messages.
Whenever you find the time dude. Whenever you find the time. :up:

[Finster]

If one has Goldbrick, and that hack is supposed to add media tags, and one switches over to AME which seems to be far more supported, will the old tags get converted? From what i read, it appears the answer is yes, but better to ask a dumb question.

Also, Highslide JS is an add-on requirement to Goldbrick, and it is a nice affect. If one disables Golbrick but keeps Highslide, I trust AME would be Highslided (or is that Highslid?) lol.

Lastly, Golbrick would allow one to upload a QT or Mov or WMV (yuck) video to their own server and paste the url to that video in a post and it would render it. I want to make surre AME does the same. Goldbrick rarely thumbnails, how good is AME?

Last dumb question, there seems to be two AME's floating around, thus confusing my pea brain.

Thanks!

[Gladhatter]

I have not seen any highslide working in my AME but it may be disabled or I may not understand. You can upload to your local server and AME will render the extentions I belive all are supported or can be with a simple edit in the cpanel. I can send you some of my cpanel what ever they are called and you can just edit them to your server info if that helps. It does not render blank spaces if render is the correct term and you need streaming names with _ or else put %20 in the blank space.

Hope this helps.

[Redzzand]

great mod! installed and working perfectly on my 3.8 board.

many thanks...

Redz

[Digital Jedi]

If one has Goldbrick, and that hack is supposed to add media tags, and one switches over to AME which seems to be far more supported, will the old tags get converted? From what i read, it appears the answer is yes, but better to ask a dumb question.
I've not personally worked with Goldbrick, but I can tell you what AME can do which might help you out. AME has a conversion tool built in, which will take existing BBCode you are using and convert the tags to it's own built in [AME] tags. So, for example, if you used to use [YOUTUBE] or [METACAFE] BBCode, you can have the conversion tool go through your posts and convert both of those tags to [AME] tags. Mind you, AME tags are not neccessary for new posts to embed, just older posts.


Also, Highslide JS is an add-on requirement to Goldbrick, and it is a nice affect. If one disables Golbrick but keeps Highslide, I trust AME would be Highslided (or is that Highslid?) lol.
AME does not use Highslide and would not affect AME videos. They would all be embedded. There's a number of reaons why, such as AME embeds more then just videos where the Highlslide wouldn't really make much sense or be practical.


Lastly, Golbrick would allow one to upload a QT or Mov or WMV (yuck) video to their own server and paste the url to that video in a post and it would render it. I want to make surre AME does the same. Goldbrick rarely thumbnails, how good is AME?
Yes, with the extended definitions in my thread (the add-on link in the main post), you can get AME to embed Local Hosted media, such as MOV, SWF, WMV, DIVX, RM, RAM and PDF.


Last dumb question, there seems to be two AME's floating around, thus confusing my pea brain.
Depends on which threads your refering to. There's the older version originally made for 3.6. Then there's my two threads which support the extended definitions for AME: Third Time's the Charm are the definitions for AME 2.0 or older, and Delta are the definitions for AME 2.5.

[Nadeemjp]

well i posted and The Geek came around;)
anyways, dont wanna push you guys, but would really look forward for the update in 3.8 as well. practically it is working fine so far so i think there shouldnt be much work involved. But then again, it is the creator's decision:)

good job DJ and Geek

[james shadle]

Is it possible to allow the listening of hosted .Mp3 files but prevent them from being downloaded.
Thanks James

[Gladhatter]

James, I think the answer is yes to this. You need to ask your server admin what to set the chmod ( I think it is 755 ) for sure not 777 on that directory at or maybe but not sure it can be pass protected but not the files. May be another chmod that will protect it as I am not that familiar with these but am sure there is a solution here. Another possible solution is a redirect code where the url is read from a fake location. Its a simple code for a competent coder to set up.

[james shadle]

James, I think the answer is yes to this. You need to ask your server admin what to set the chmod ( I think it is 755 ) for sure not 777 on that directory at or maybe but not sure it can be pass protected but not the files. May be another chmod that will protect it as I am not that familiar with these but am sure there is a solution here. Another possible solution is a redirect code where the url is read from a fake location. Its a simple code for a competent coder to set up.


Makes sense!
I even know how to set the chmod, just not what to set it to.
I will try 755.
Thanks,
James

[Gladhatter]

I have tried all the chmods and I cannot stop it but there may be one that will work or the server help you restrict it or again pass protect not sure of and redirect, nearly positive would work with proper code.

[Gladhatter]

755 is not going to work and 710 711 will not allow you to connect. File a support ticket with your server admin and see if they will help.

[shadyninja]

awesome mod, easy install!~

[james shadle]

I installed AME 2.5 on VB 3.7.1 and I don't see the "admincp->AME CP->Settings"
There are some options for modifying code in the plug in area, but nothing in the Admin CP listing AME CP.
Any idea what I might have done wrong?
Thanks James

[Digital Jedi]

Your browser should have refreshed after install and the AME CP would be near the top. Try going back your ACP and refreshing to see if it's there now.

As for preventing downloading, the only thing you could really do is customize the player and don't include the download link. See this post (https://vborg.vbsupport.ru/showpost.php?p=1484854&postcount=3)and scroll down to the part about MP3s.

[james shadle]

That's not it!:)
I failed to transfer the XML files. All me, not you.
Thanks for the help.

[Dave-M]

Hi, thanks for this, it works great for me :)

Is it possible to have the videos left align by default? I can't seem to see a setting for that.

Anyone guide me in the right direction please? :)

Thanks.

[Gladhatter]

Dave I am not sure how to do it and not sure it is possible without some code lines written. Does not respond to any left align BB codes. If you are using Html you may have better luck with this but worse luck with hacker and code injections and other hacks.

[Dave-M]

Thanks, I don't use HTML :)

Seems odd that it won't left align when using the BB tags. Allowing this would be an excellent feature I think :)

[Digital Jedi]

Hi, thanks for this, it works great for me :)

Is it possible to have the videos left align by default? I can't seem to see a setting for that.

Anyone guide me in the right direction please? :)

Thanks.
In AME 2.0 you edit the Container HTML under Settings to change the alignment, and in 2.5 you would edit the container template.

[The Geek]

<a href="https://vborg.vbsupport.ru/showthread.php?t=202476" target="_blank">Note that 2.5 Gold has been released. Click Here.</a>

[nickypoooo]

great mod! But I'm having a problem with IE7.. it does not show videos (shows links only) works great on firefox.

your help is needed :)

see link: http://radio4u.co.il/radio4u/showthread.php?t=50&langid=1

Thanks for your support!

[Gladhatter]

I cannot get your link to show up in IE7 http://radio4u.co.il/radio4u/showthr...?t=50&langid=1 Nowever I am not sure the ? mark in it is regexed to work or not or what the correct term for that is.

[The Geek]

I cant find the video on YouTube. Make sure it is a valid URL. Also, you may want to install and update to the 2.5 gold version (https://vborg.vbsupport.ru/showthread.php?t=202476)

[nickypoooo]

This link works on firefox but does not show on IE7. this is going on for all vids that I try to add to post.

Thanks

[The Geek]

Again, I would try the 2.5 version

[Digital Jedi]

great mod! But I'm having a problem with IE7.. it does not show videos (shows links only) works great on firefox.

your help is needed :)

see link: http://radio4u.co.il/radio4u/showthread.php?t=50&langid=1

Thanks for your support!

This link works on firefox but does not show on IE7. this is going on for all vids that I try to add to post.

Thanks
According to YouTube, this video has been removed by the user.

[nickypoooo]

According to YouTube, this video has been removed by the user.
see this link:
http://radio4u.co.il/radio4u/showthread.php?p=34#post34

It does not work with any vid. I will upgrade to last vir and maybe it will work.

Thanks.

[Gladhatter]

see this link:
http://radio4u.co.il/radio4u/showthread.php?p=34#post34

It does not work with any vid. I will upgrade to last vir and maybe it will work.

Thanks.

I am fairly comfortable to say if the link is removed then you will not be able to play it. If you did play the link one time however the FVl file that is actually a swf file is in your cache and you can rename it to *.swf and host it locally and play it.

[nickypoooo]

I am fairly comfortable to say if the link is removed then you will not be able to play it. If you did play the link one time however the FVl file that is actually a swf file is in your cache and you can rename it to *.swf and host it locally and play it.

That same link works on Firefox but does not work on IE7

http://radio4u.co.il/radio4u/showthread.php?p=34#post34

[Gladhatter]

That same link works on Firefox but does not work on IE7

http://radio4u.co.il/radio4u/showthread.php?p=34#post34

Pure speculation here and not having firefox installed right now and not even learning it when I did, I digress. I believe I understand you to say that the link says it is down now.

I think I understand you to say you can see this link with firefox and it is down yet.

I do recall how fire fox ( I will call it cached) data so when you reopened it it would have the same page loaded. This leads me to wish to help you by asking if I have understood you with all the above and if the answer is yes can you have someone with firefox try to open it that has not before and cannot have it cached.

If I understand you and it is a dead link, then for sure you have to imagine that you cannot view it in IE7 and reasonably would not be able to in Firefox or anthing else that does not read a cached file.

So now is the link actually removed you are trying to view?

[Digital Jedi]

That same link works on Firefox but does not work on IE7

http://radio4u.co.il/radio4u/showthread.php?p=34#post34
Your missing your height and width settings, that's why it's only showing one browser type. What do you have set for your post height and width settings in AME CP? Also, if you've upgraded to 2.5, then you should direct all your question to the new thread instead of here.

[nickypoooo]

Your missing your height and width settings, that's why it's only showing one browser type. What do you have set for your post height and width settings in AME CP? Also, if you've upgraded to 2.5, then you should direct all your question to the new thread instead of here.

Are you talking about the Container HTML?

<div align="center">
<table class="tborder" cellpadding="6" cellspacing="1" border="0" width="400" style="margin:10px 0">
<thead>
<tr>
<td class="tcat" colspan="2" style="text-align:center">
<a href="$url" title="$title" target="_blank">$title</a>
</td>
</tr>
</thead>
<tbody>
<tr>
<td class="panelsurround" align="center">

[Digital Jedi]

Are you talking about the Container HTML?

<div align="center">
<table class="tborder" cellpadding="6" cellspacing="1" border="0" width="400" style="margin:10px 0">
<thead>
<tr>
<td class="tcat" colspan="2" style="text-align:center">
<a href="$url" title="$title" target="_blank">$title</a>
</td>
</tr>
</thead>
<tbody>
<tr>
<td class="panelsurround" align="center">
No, I mean in your global post size settings. I guess if you don't know what I mean then you must be on AME 2.0, right? Which set of definitions did you download? Because Third Time's the Charm is for 2.0, but Delta is for 2.5. If you try to use my 2.5 definitions in 2.0 then you won't get any height and width defined for your videos, so in IE, the videos won't be visible.

[kevcj]

In AME 2.0 you edit the Container HTML under Settings to change the alignment, and in 2.5 you would edit the container template.

Where can I find the container template?

[The Geek]

IIRC, in 2.0 its in your settings. I would suggest upgrading to 2.5 (which is a seperate release to this older one)

[Finster]

Do to a lack of support for Goldbrick, and exemplary support for this hack, we just had someone install this, but most of the Goldbrick media tags did not convert. I also noticed that urls to .mov files uploaded to the site server do not render into anything but a hyperlink. Do we need to add that part 2 hack with all the xml conversions to fix that?

It looks like one needs 2.5 to change the video window size as all the 16:9 videos get the top and bottom cropped and they are a little small anyway.

Lastly, Exposureroom.com is the brand new but now defacto standard bearer for HD video streaming. Not much content there yet, but it smokes other HD video file sharing sites, you just have to figure out how you would add that on considering the same url appears to display for 3 different sizes of the same video, with the medium one being the best.

I REALLY wish playing the video would use a highslide lightbox effect. We left highslide in place for still images, but it doesn't work on AME videos, only the Goldbrick hack did.

[Digital Jedi]

Do to a lack of support for Goldbrick, and exemplary support for this hack, we just had someone install this, but most of the Goldbrick media tags did not convert. I also noticed that urls to .mov files uploaded to the site server do not render into anything but a hyperlink. Do we need to add that part 2 hack with all the xml conversions to fix that?
I don't know exactly how Goldbrick worked, but if it used some type of BBCode, you can use AME's conversion tool to change those tags into special tags that AME uses.

Built into AME is just a few supported sites. For the full spectrum of supported sites, including support for local hosted media, you would need the definitions in my Add-On thread.


It looks like one needs 2.5 to change the video window size as all the 16:9 videos get the top and bottom cropped and they are a little small anyway.

2.5 is the latest stable version in the 3.8 section, but the resizing feature of 2.5 is that you can resize your videos globally. You can still resize videos per individual definition in the AME CP. You probably would still want to upgrade to the latest version.


Lastly, Exposureroom.com is the brand new but now defacto standard bearer for HD video streaming. Not much content there yet, but it smokes other HD video file sharing sites, you just have to figure out how you would add that on considering the same url appears to display for 3 different sizes of the same video, with the medium one being the best.

I maintain the Add-On threads with the collected definitions, and I periodically add sites to the request list to look over. I'll add this to the list to see what I can do. Keep an eye out there for updates.

I REALLY wish playing the video would use a highslide lightbox effect. We left highslide in place for still images, but it doesn't work on AME videos, only the Goldbrick hack did.
Wouldn't work with AME as it wasn't designed originally, but there's also the fact that AME handles more the just media, so it might make for some awkward conversions.

[Gladhatter]

And I wish to add like all programs your desires really boils down to desire and means of payment along with finding a willing coder.

While AME certainly was not coded for this as indicated all things are possible up to a point and that point is nearing infinity with the right coder a hold of it.

The question then becomes as well is the money and effort worth the final expense or is there another solution that more fits your needs or do you need to do a total rewrite or almost total rewrite or a hybrid of the two ideas.

I am not wishing to come off here as any or all knowing as I know so little. What I do know is that nearly no program offered on the market ever suits our needs and most of them we justify spending more time and money that some, many or most would to get them into a form we find suitable. This can be the same principal you may wish to apply here and may not be as well. Do not want to polute this thread with what we are doing with other code but fact is some times a set of code is a good starting point and yet just needs developed further to suit the next guy down the lane.

[Finster]

DJ, We did convert over to 2.5...after some fiddling, a web person who actually knows what they are doing compared to me got pretty much all the previous GoldBrick media tags to convert.

Is there a way for this to NOT grab the name of the video file sharing site and auto-add it to the video title name? Or better yet, substitute in a selected name added to the video title? I bet 500 downloaders want 500 different things! lol

Instead of getting the Dreaded blue M of death thumbnail, now all the videos have screengrab stills. Finally! lol.

You ARE the strongest link! ;)

[Digital Jedi]

DJ, We did convert over to 2.5...after some fiddling, a web person who actually knows what they are doing compared to me got pretty much all the previous GoldBrick media tags to convert.

Is there a way for this to NOT grab the name of the video file sharing site and auto-add it to the video title name? Or better yet, substitute in a selected name added to the video title? I bet 500 downloaders want 500 different things! lol

Instead of getting the Dreaded blue M of death thumbnail, now all the videos have screengrab stills. Finally! lol.

You ARE the strongest link! ;)
Just to avoid any confusion, I'll answer your question in the 2.5 thread then: https://vborg.vbsupport.ru/showthread.php?t=202476

[TC Topps]

To the Geek;

Thank you kindly sir! I only have a small idea of what has been done to create this contribution!

I can only dream of giving even a small portion back to the community in comparison! But again thanks a lot! This product really adds a lot to vBulletin use!

My best regards!

TC Topps

[Gladhatter]

To the Geek;

Thank you kindly sir! I only have a small idea of what has been done to create this contribution!

I can only dream of giving even a small portion back to the community in comparison! But again thanks a lot! This product really adds a lot to vBulletin use!

My best regards!

TC Topps


I have a notion that you click that paypal button up there and support the coder himself until you can give back to the community and help him give more and better.

[ged]

When I post any youtube link in any profile's visitor messege, It's shows double...

http://img134.imageshack.us/img134/4663/profilewp4.pngI have this same problem but there is only one Youtube definition, how can I solve it?

[parabat]

No, I'm afraid AME doesn't convert attachments. The URLs for attachments aren't unique enough for AME to distinguish what kind of media it is.

Isn't it possible to add a option in the attachments upload area to specify the media type so that AME doesn't have to figure it out, but it's done manually by the uploading user?
This would be very helpful.

-PB

[The Geek]

Ged, you've go duplicate definitions.

Thanks is good enough :)

Go install 2.5 this version is outdated :)

[i156]

I just installed vbTube (http://vbtube.com) on my site and I'm wondering if there is away I could get AME to work with my own url's from this plugin. Example URL:

http://www.usacarry.com/forums/videos/90/shotgun-mossberg-590.html#watch

[Gladhatter]

I just installed vbTube (http://vbtube.com) on my site and I'm wondering if there is away I could get AME to work with my own url's from this plugin. Example URL:

http://www.usacarry.com/forums/videos/90/shotgun-mossberg-590.html#watch


Short answer is yes. Longer answer is you have to write a regex definition for it in the AME cpanel OR BRIBE geek or DJ WITH HUGE amounts of money ( send it direct to me of course for transfer to them) and then you may get it done.

KIDDING about the bribery.

Any coder with regex experience or wanting to learn it can do this for you fee based.

[Adeawan]

Not Working On My Forum
I put the url and it jst shows the url thats it.

[Gladhatter]

Not Working On My Forum
I put the url and it jst shows the url thats it.With all the respect in the world here for this posting member but wishing to use this as an oppertunity to teach, Please read this post and tell me what possibility does the coder or anyone have to respond to this poster with any relevent information or reply?

You can read it and see it is a one liner type post with 0 information about what is not working. We can assume it was made in the correct forum and is about AME but we may be wrong about that even.

We understand the poster seems to have some issue with something not working.


The poster however failed to take the time to document anything about anything.


There is no mention of what is not working. eg. My ame version XX.x is not functioning. This is the functions in that version of AME that I am having an issue with.
No mention of the forum version it is used on. Is this a Vbulletin forum as we assume and to remove all doubt why not just identify it by Version of the forum if not name and version.
No mention of the specifics of what is not working.
No url posted that is not working.
No indication of what if anything the poster has done to trouble shoot the problem.
NO screen shot or idenifying information of any kind that can help anyone to help the poster.I wish to finally and respectfully say that it is unlearned and approaching rude to do this. Here we have a coder that has put in 100s to 1000s of hours building a fine program and here now when he is clearly on a limited schedule as indicated in "not supported" to support this product and you have one person jump up and conclude almost rudely that obviously something is wrong as it is a shared problem with many and not realizing that 1000's are using it successfully and the "Something Wrong" is the hand full that are not doing the things needed to make it run right and disrespecting the coder with casting aspersions of doubt on him and not knowing as they point one finger at the coder they are pointing 4 back at themselves.

Then we find that followed by this poster that either wishes no help or else is used to a mind reader helping them or a jelous lover with a remote spy on their box that magically fixes all the issues that come up as they can see them with the remote connect software and just does not tell them they are being spied on.

Maybe this person has none of the above but thinks the community or the coder can fix the unidenified problem with out any clue as to what the problem is.

So in summation here, if you wish to post an issue and you have any reasonable expectation of any valuable help then PLEASE post enough information to allow some one to assist you.

It is not nice to say this is not working and then summon the coder to have to go through an ardous process to dig out what is not working and then try to teach the person to hit one control and turn it on as he could do had this been idenified in the first post for help made and not 25 post later when he finally finds out what it is that is not working.

[The Geek]

Not Working On My Forum
I put the url and it jst shows the url thats it.
works on at least 1,000 others. You need to provide more information that you are (i.e. a link to a page that isnt working and/or the URL that isnt converting).

I would also suggest using 2.5 as it .5 newer ;)

[ArnyVee]

Anyone having issues this morning with only the URL showing?

I tested it on visitor messages and regular posts. On the regular posts it shows a link to nowhere and on the visitor messages just places the text to the video title.

Anyone else know of this issue and found a fix?

[ArnyVee]

Something really weird is going on here....now I edited one of the 'non-working' links with another url from YouTube and it's showing "DIV" tags and stuff.

Here's where it's showing.... http://www.waltdisneyboards.com/disney-news-know/13977-its-small-world-reopens-disneyland.html

And, this is the video I'm trying to add....

http://www.youtube.com/watch?v=BcU0P2y5lwI

[Adeawan]

works on at least 1,000 others. You need to provide more information that you are (i.e. a link to a page that isnt working and/or the URL that isnt converting).

I would also suggest using 2.5 as it .5 newer ;)

Ohhh It Just Start Working Today

I Was Gona Give The Link But Just Seen That It Start Working

Thanks Alot:D

[ArnyVee]

I am having issues (just started this morning) where I cannot have a YouTube (or other) video embedded correctly. I'm currently running 3.7.4, if I upgrade to 2.5 will it help with this issue?

I changed the "URL" to "AME" as someone had mentioned in the 2.5 thread (and possibly here on this thread), but it simply displays the following code on the post....

<div style="display: none;" id="ame_noshow_post_1234038437_3">
<a href="" title="YouTube" target="_blank">YouTube</a>
</div>
<div style="display: inline;" id="ame_doshow_post_1234038437_3">
<div align="center">
<table class="tborder" cellpadding="6" cellspacing="1" 425 style="margin:10px 0">
<thead>
<tr>
<td class="tcat" colspan="2" style="text-align:center">
<a href="" title="YouTube" target="_blank">YouTube</a>
</td>
</tr>
</thead>
<tbody>
<tr>
<td class="panelsurround" align="center">
<object width="425" height="350">
<param name="movie" value="http://www.youtube.com/v/dZZfuCJ970w"></param>
<param name="allowFullScreen" value="true"></param>
<embed src="http://www.youtube.com/v/dZZfuCJ970w" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="350" wmode="transparent"></embed></object>
</td>
</tr>
</tbody>
</table></div>
</div>


....any thoughts?

[mgmods]

Hi,

Great mod! Is there anyway to make this so that it works with a forum RSS feed poster bot? For example, I have break.com's feed in one of my forums, and the posts don't get the video embedded (I have the addon XML pack so they normally do). If I edit the post and click save then it works perfectly. Is there some kind of cronjob I could set up to rebuild the posts in that particular forum every so many minutes?

Any ideas?

Thanks,
Matt

[The Geek]

Hi,

Great mod! Is there anyway to make this so that it works with a forum RSS feed poster bot? For example, I have break.com's feed in one of my forums, and the posts don't get the video embedded (I have the addon XML pack so they normally do). If I edit the post and click save then it works perfectly. Is there some kind of cronjob I could set up to rebuild the posts in that particular forum every so many minutes?

Any ideas?

Thanks,
Matt
hmmm... there isn't a cron job per say, however I am not sure why it wouldnt work with an RSS feed. Let me look into it.

@Arny... I responded to you in the 2.5 thread :)

[Dabbi]

Not sure why but this mod was adding an extra http to urls members would just drop into a post. It caused an error and I had to actually delete the posts since it wouldn't allow me to edit the links out.

This mod is now disabled and the problem has gone away but I'd really like to be able to allow members to embed YouTube videos so would appreciate a solution rather then my having to delete the mod.

Thanks for any help. :)

[Gladhatter]

Not sure why but this mod was adding an extra http to urls members would just drop into a post. It caused an error and I had to actually delete the posts since it wouldn't allow me to edit the links out.

This mod is now disabled and the problem has gone away but I'd really like to be able to allow members to embed YouTube videos so would appreciate a solution rather then my having to delete the mod.

Thanks for any help. :)


While it is surely terrible that you have this issue, please re read your post and ask your self a question. What information have I supplied in this post that gives anyone .0000001% of a chance to help me fix it.

You have not given any real symptoms of your problem, no link to your forum, no utube link you have had fail, no version of your forum, no list of addons NOT ANYTHING that can possibly allow you any help with the problem.

[Dabbi]

Here's the thread here where I originally asked for help:
https://vborg.vbsupport.ru/showthread.php?t=205238

UPDATE: In searching some more I've found that there was a conflict with this mod I had installed:
https://vborg.vbsupport.ru/showthread.php?t=96926 I have now disabled that mod and turned this one back on. It would be handy if I could have both functioning at the same time but I can switch on and off if I need to use this HTML mod for some reason.

[Gladhatter]

Thank you for your clarifications. I will say only this to allow others with better knowledge to input. Using Html on forums has only brought me great pain and many hacks due to the vunerability of Html injections that allows hacker access.

[Dabbi]

Thank you. :) I'm well aware of the risk of allowing HTML which is why I used that specific mod. I can have HTML disabled for the whole board and with that mod only highly trusted admin can use HTML.

[Gladhatter]

Well sure hope your issues are resolved and your Forum days are all a pleasure.

[Dabbi]

Thank you for your reply.. and best wishes to you as well. :)

[ged]

Ged, you've go duplicate definitions.

Thanks is good enough :)

Go install 2.5 this version is outdated :)But it doesn't seem duplicate? There is only one YouTube definition?

I'm missing the point in somewhere but where? :rolleyes:

[Capper5016]

I cant get the ESPN videos to embed:

http://forum.masdebaters.com/showpost.php?p=73&postcount=11

[ButtKrust]

Is it possible for this mod to also turn links within your modules into embed, if you so desire?

[Tauhid]

hey mod author,

facebook allows embedding capability nowadays, can anything be done to add facebook video capability in this mod??

[Digital Jedi]

hey mod author,

facebook allows embedding capability nowadays, can anything be done to add facebook video capability in this mod??
FaceBook is on the list of updates for the Add On definitions for this modification.

[cosy]

i want to install this but i got goldbrick atm and i dont find a way to replace the goldbrick [media] tags to [ame] tags
any ideas ?

[Tauhid]

FaceBook is on the list of updates for the Add On definitions for this modification.

Ok I actually installed the add on (DJ`s master xml) and then tried to post direct facebook video links and also the embed links. both ways, no luck, it didn`t work. and in the definition mods, facebook is not highlighted or written. does this mean that the facebook compatibility is under production

[Digital Jedi]

Ok I actually installed the add on (DJ`s master xml) and then tried to post direct facebook video links and also the embed links. both ways, no luck, it didn`t work. and in the definition mods, facebook is not highlighted or written. does this mean that the facebook compatibility is under production
I said Facebook is on the list for udpates. That means I haven't added it yet. ;)

[Ryloth]

So this has been "installing" for over 30 hours now. I have a ton of yellow dots and the window is still doing something I suppose. It creates a column on the posts table then that looks like it is as far as it gets. I have vbulletin 3.8.3. Any ideas? The post table has 2 million rows on my board. But 30 hours to add a column/index? My CPU is nothing right now and I am running it locally from my server.

[soundbarrierpro]

I'm going out on a limb here......

I'm going to guess something didn't go right during install.

[Ryloth]

well, i realized i did post this in the wrong version. i am installing 2.5.4. it hangs when it attempts to create an index on the post table. just hangs. post table is myiasm. i dont get it. the board is perfectly fine.

i am about ready to edit the product xml to remove that step and add the index manually to the database myself.

[milaszewski]

after the installation when I go to any AME settings in Admin CP I get something like this:
options['automediaembed_resolve']) { print_form_header('automediaembed_admin', '', false, true, 'warningform'); print_table_header($vbphrase['automediaembed_warning']); print_description_row($vbphrase['automediaembed_extraction_off']); print_table_footer(); } } /** * Display settings */ if ($action == "settings") { $settings = array( 'xusergroups' => explode(",", $vbulletin->options['automediaembed_usergroups']), 'xforums' => explode(",", $vbulletin->options['automediaembed_forumids']), 'open' => $vbulletin->options['automediaembed_open'], 'close' => $vbulletin->options['automediaembed_close'], ); $results = $db->query_read_slave("SELECT usergroupid, title FROM " . TABLE_PREFIX . "usergroup ORDER BY usergroupid ASC "); print_form_header('automediaembed_admin', 'savesettings'); print_table_header($vbphrase['automediaembed_settings']); print_yes_no_row($vbphrase['automediaembed_disable_new'], 'disablenew', $vbulletin->options['automediaembed_disable']); print_yes_no_row($vbphrase['automediaembed_doforums'], 'doforums', $vbulletin->options['automediaembed_doforums']); print_yes_no_row($vbphrase['automediaembed_doblogs'], 'doblogs', $vbulletin->options['automediaembed_doblogs']); print_yes_no_row($vbphrase['automediaembed_dogroups'], 'dogroups', $vbulletin->options['automediaembed_dogroups']); print_yes_no_row($vbphrase['automediaembed_dovms'], 'dovms', $vbulletin->options['automediaembed_dovms']);

and much much more of this stuff... what did I do wrong?

[milaszewski]

ok, I uploaded files from version 1.2 and it works fine now

[The Geek]

The above is because your server isnt parsing the page as php. Most likely because the file extension was changed or your server expects .php4 or similar (or you just need to reupload)

[BigDog56]

Upgraded, thank you! Fantastic mod!

[madscientist06]

great mod. can I change the alignment?all the videos are center alligned!

[matthewhotdude]

Your 'Extract Destination Data setting is currently off. That means that you will be unable to resolve URL titles and some providers (i.e. yahoo and dailymotion) will not function!

What does that mean?

Ignore, sorted

[z0diac]

Will this work with ATTACHED video files? (files that are attached to posts) That's what I'm looking for - so I don't have to send my vids to youtube and can just attach them right onto my post, then have them play right in the post when someone's viewing it.

[influence]

how do u uninstall this mod? I am getting this error whenever I try

Database error in vBulletin 3.7:

Invalid SQL:
ALTER TABLE `usergroup` DROP `automediaembed_edit_permissions`;

MySQL Error : Can't DROP 'automediaembed_edit_permissions'; check that column/key exists
Error Number : 1091
Request Date : Sunday, December 6th 2009 @ 04:43:15 AM
Error Date : Sunday, December 6th 2009 @ 04:43:15 AM
Script : forums/admincp/plugin.php?do=productkill.php?do=kill
Referrer : forums/admincp/plugin.php?do=productkill
IP Address : xxxxxxxxxx
Username : xxxxx
Classname : vB_Database
MySQL Version : 4.1.22-standard

[kyle]

anyone know what I need address when receiving this msg, within the AME PC

"AME can not write to /home/moneytec/public_html/forums/amecache/. Check permissions to ensure path is writeable."

[ShackMaster]

I deleted Amazon from the definitions, but it still rewrites them... any idea why it does not stop?

Thanks!

[tobe12]

Allows user to simply 'paste' in a URL (i.e. a youtube link) without needing to know any special tags. However instead of displaying just the URL, it will show the media within the post

I have installed the mod but the above feature does not work. Can someone test it on my site and tell me why it is not working?

[Digital Jedi]

I have installed the mod but the above feature does not work. Can someone test it on my site and tell me why it is not working?
You posted in my definitions thread that they weren't working, too. If that's the case, your using the wrong version of AME. My Delta definitions are for AME 2.5. They won't work with this old version of AME.

Also, you mentioned something about vBulletin 4.0. You should be aware that AME 3 is specifically made for vB 4, but that my Delta definitions are incompatible with that version too.

[NeXuM]

is it working with vbulletin 3.6.8?

[Digital Jedi]

is it working with vbulletin 3.6.8?
The newest version for the vBulletin 3x series is AME 2.5, and definitions for this version are no longer being supported. You'd need 2.5 if wanted to do anything with this mod, as even the default definitions of 2.0 aren't up to date.

[USAMustangs.com]

Will this auto embed vimeo.com video URLs?

Thanks.

[zeus_r6]

Is there a way to disable automatic embedding on a certain style?

[Digital Jedi]

Is there a way to disable automatic embedding on a certain style?
You should be running AME 2.5, as this one is seriously out of date. In the AME 2.5 thread, there's a link to my add-on where you can change the templates for a mobile style. Should do what your wanting.

[geckoz]

Our youtube videos / definitions not working anymore. Can anyone help ?

See for example:
http://www.sims3forum.de/die-sims-3-videos-bilder/14250-small-acoustic-performance.html

It's all messed up!

[appsfinder]

can this work with videos from vevo.com

[basskiller]

https:// <--- doesn't work

http:// does work

[behcet]

https?:\/\/www\.facebook\.com\/(?:video\/video|photo)\.php\?v=([0-9]+)