Add-On Releases - Attached Image Watermarking PLUS Guest Viewing of Thumbnails

I had been looking for these two options for quite a while, and was finally able to hire Brian (of vBadvanced) to write them for me. Since a lot of people have been looking for this, I have decided (with Brian's permission) to release this as a free, unsupported, modification.

This modification will allow you to specify a watermark image that will be overlayed over any attached JPG or PNG file on your site in real time, as the image is displayed. NO PERMANENT CHANGES ARE MADE TO ANY OF YOUR ATTACHMENTS. You can also exclude specific forums and usergroups from seeing the watermark.

As an added bonus, he included the ability to allow guests to see attached image thumbnails, while still requiring them to register to see the full size attachments. (Make sure you have your Unregistered / Not Logged In usergroup set to NOT have access to download attachments.)

PLEASE CLICK INSTALL so that maybe Jelsoft will include these as built-in features in a future version.

Notes/Troubleshooting:

• Your server needs to have GD2 installed.
• Attachments must be stored in the file system. Database storage of file attachments will not work.
• Make sure you use the full PHYSICAL path to your watermark image.
• Make sure you have a low number in the width/height setting. (I use 200, since my watermark image is 150 pixels wide.)
• If you have previously viewed the attached image, your browser may cache it, so you will need to clear your browser cache or force a hard refresh (CTRL-F5) while viewing the image to get the new watermarked version.

Well, on to the modification:

=============================================
STEP 1:
Since the resulting file contains too much vBulletin code, I am unable to include it with this modification. So, the first step is to copy vBulletin's attachment.php to a file named attachment_watermark.php. Then, edit attachment_watermark.php, making the following changes.

=============================================
STEP 2:
You need to delete a LOT of lines from the top of the file. Find this line...

$idname = $vbphrase['attachment'];

...and delete everything ABOVE it other than the <?php line at the top of the file.

Your attachment_watermark.php file should begin with this code when you've completed this step:

<?php
$idname = $vbphrase['attachment'];

=============================================
STEP 3:
Find this line of code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

REPLACE with this code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) AND !$vbulletin->GPC['thumb'])  OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

=============================================
STEP 4:
Find these lines of code:

	else
	{
		$attachpath = fetch_attachment_path($attachmentinfo['userid'], $attachmentinfo['attachmentid']);

Add this code BELOW the lines referenced above:

// #########################################
// ##### Start modified section for watermarks
// #########################################

$vbulletin->options['attach_water_exforums'] = explode(',', $vbulletin->options['attach_water_exforums']);
$vbulletin->options['attach_water_exgroups'] = explode(',', $vbulletin->options['attach_water_exgroups']);


if ($vbulletin->options['attach_water_filelocation']
	AND in_array($extension, array('jpg', 'jpeg', 'png'))
	AND !in_array($attachmentinfo['forumid'], $vbulletin->options['attach_water_exforums'])
	AND !array_intersect(fetch_membergroupids_array($vbulletin->userinfo), $vbulletin->options['attach_water_exgroups'])
)
{
	$attachsize = getimagesize($attachpath);

	if ($attachsize[0] >= $vbulletin->options['attach_water_minsize'] AND $attachsize[1] >= $vbulletin->options['attach_water_minsize'])
	{
		$waterimage =& $vbulletin->options['attach_water_filelocation'];
		$watersize = getimagesize($waterimage);

		$waterext = strtolower(substr($waterimage, strrpos($waterimage, '.') + 1));

		// Coordinates (height)
		switch ($vbulletin->options['attach_water_coordinates'][0])
		{
			case 'n':
				$waterpos['height'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'm':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1]) / 2);
			break;
			case 's':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Coordinates (width)
		switch ($vbulletin->options['attach_water_coordinates'][1])
		{
			case 'w':
				$waterpos['width'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'c':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0]) / 2);
			break;
			case 'e':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Watermark ext
		switch ($waterext)
		{
			case 'jpg':
			case 'jpeg':
				$watermark = imagecreatefromjpeg($waterimage);
			break;

			case 'png':
				$watermark = imagecreatefrompng($waterimage);
			break;
		}

		// Attachment ext
		switch ($extension)
		{
			case 'jpg':
			case 'jpeg':
				$attachimage = imagecreatefromjpeg($attachpath);
			break;

			case 'png':
				$attachimage = imagecreatefrompng($attachpath);
			break;
		}

		imagealphablending($attachimage, true);

		$watermark_width = imagesx($watermark);
		$watermark_height = imagesy($watermark);

		imagecopy($attachimage, $watermark, $waterpos['width'], $waterpos['height'], 0, 0, $watersize[0], $watersize[1]);
		define('WATERMARKED', true);
	}
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 5:
Find this line of code:

header('Content-Length: ' . (($lastbyte + 1) - $startbyte));

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// ##### Changed to prevent filesize header on watermarked images
// #########################################
if (!defined('WATERMARKED'))
{
	header('Content-Length: ' . (($lastbyte + 1) - $startbyte));
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 6:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_display')) ? eval($hook) : false;

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// #########################################
if (!$vbulletin->GPC['thumb'] AND defined('WATERMARKED'))
{
	imagejpeg($attachimage);
	imagedestroy($attachimage);
	imagedestroy($watermark);
}
// #########################################
// ##### End modified section for watermarks

=============================================
STEP 7:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_complete')) ? eval($hook) : false;

REPLACE with this code:

exit;

=============================================
STEP 8:
Save and upload attachment_watermark.php to your forum root directory.


=============================================
STEP 9:
Install the product-attach_watermark.xml Product via the vBulletin AdminCP Product Manager.


=============================================
STEP 10:
Configure the options at AdminCP -> vBulletin Options -> Attachment Watermarks. All fields should be self-explanatory.

[z0diac]

Great mother of god - I've been waiting for something like this since the day of my vB install.

QUESTION: Is there any way (or future plans) to have it add text BELOW the original image instead of a watermark directly over top of the image? I know my users would want my head on a pike if I covered up part of their photos with a watermark, no matter what the size of it....

[taheri6]

Hello,

I am going to sound like a retard, but how to I verify if the attachments are in the filesystem? I checked in the ACP->options->Message attachment options - and I dont see where I can choose.

I have the mod installed, and everything looks the same as it did before I installed the mod, no difference.

[ConqSoft]

AdminCP->Attachments->Attachment Storage Type

[taheri6]

Doh, thanks!

I changed to the file system and now it works! YAY! Thanks for the mod, and for helping the retarded

[Galt56]

Just wondering if anyone had seen errors like this:

Warning: getimagesize(/kunden/hompages/REST OF PATH TO IMAGE LISTED HERE) [function.getimagesize]: failed to open stream: No such file or directory in /attachment_watermark.php on line 97

Warning: imagecreatefrompng(/kunden/hompages/REST OF PATH TO IMAGE LISTED HERE) [function.imagecreatefrompng]: failed to open stream: No such file or directory in /attachment_watermark.php on line 138

Warning: imagesx(): supplied argument is not a valid Image resource in /attachment_watermark.php on line 157

Warning: imagesy(): supplied argument is not a valid Image resource in /attachment_watermark.php on line 158

Warning: imagecopy(): supplied argument is not a valid Image resource in /attachment_watermark.php on line 160

Warning: Cannot modify header information - headers already sent by (output started at /homepages/REST OF PATH TO IMAGE LISTED HERE/includes/class_core.php:3036) in /attachment_watermark.php on line 240

The error messages continue with other lines when you click on a thumbnail and try to view the full-sized image. The thumbnails are fine.

I have tried to edit the attachment.php file twice and followed all the steps. A transparent png file is being used for the watermark as the full path to the image from the server root (as determined by php info) is being used.

I have verified GD version 2+ and images are stored in a file system.

Thanks.

[adrianus]

Made changes for gif and it works perfectly!

Thanks.

[tekstylez]

is there anyway to watermark bbcode images?

[Ntfu2]

finally got around to redoing the steps, and reuploading the product.

Everything works perfect again, thanks for the great mod!

[bjhuang]

how to watermark hotlinked images only?

[Ntfu2]

You can't watermark images that are not on your server.