Miscellaneous Hacks - Mark Threads As "Solved"

My time is very limited these days, with my full time job. I have marked this mod as re-usable code, if any other coder wishes to continue work on it. I may still try to support this mod as time permits.



If you use this modification, please >> Mark As Installed, and consider Nominate for MOTM and Support Developer <<


What is this!?
This modification will allow you & your members (based on usergroup permissions) to mark a thread as "Solved". It will add the prefix "[SOLVED]" to the thread title, and if set in the admincp - it will also close the thread.

Current Version
2.0.1.

Features flagged for future version(s):

• Thread starter can choose to solve a thread, and input the username of who solved it - that user would receive rep. points. (admin-configurable amount of rep. points)
  
• Given the above - include count of threads a user has solved in postbit & profile
  
• Option to move the thread to a specific forum when a thread is "Solved"
  
• Possibly figure out a way to automate everything on install - so there are no template edits.

And anything else that is suggested

Will this work on x.x.x ??
Unless otherwise stated, this will work on all 4.0.x versions. This will not work on 3.x.

Sounds cool. How do I install?

1. Extract the zip, you should have the following directories/files:
   
   

   /
   |_ install.html
   |_ product-solvedthread.xml
   
   /upload/
   |_ solved.php
   
   	/upload/images/
   		/buttons/
   		|_ marksolved.gif
   
   	/upload/includes/
   		/xml/
   		|_ bitfield_solvedthread.xml

2. Upload: (in the below instructions 'yourforum' would be where you have vBulletin installed)
   • /upload/solved.php to /yourforum/solved.php
     
   • /upload/images/buttons/marksolved.gif to /yourforum/images/buttons/marksolved.gif (upload to each style folder, if you have more than one style)
     
   • /upload/includes/xml/bitfield_solvedthread.xml to /yourforum/includes/xml/bitfield_solvedthread.xml
3. Import the product, product-solvedthreads.xml by going to: AdminCP -> Plugins & Products -> Manage Products -> [Add/Import Product]
   
4. Make the following template edits to all of your installed styles:
   
   SHOWTHREAD
   
   Find:
   

   					<vb:if condition="$show['addpoll']">
   						<li><a href="poll.php?{vb:raw session.sessionurl}do=newpoll&amp;t={vb:raw threadid}">{vb:rawphrase add_a_poll_to_this_thread}&hellip;</a></li>
   					</vb:if>

   Add after:
   

   					<vb:if condition="$show['solvedthread']">
   						<li><a href="solved.php?{vb:raw session.sessionurl}do=marksolved&amp;t={vb:raw threadid}">{vb:rawphrase solvedthread_marksolved}&hellip;</a></li>
   					<vb:else />
   						<vb:if condition="$show['solvedthread_unsolve']">
   						<li><a href="solved.php?{vb:raw session.sessionurl}do=markunsolved&amp;t={vb:raw threadid}">{vb:rawphrase solvedthread_markunsolved}&hellip;</a></li>
   						</vb:if>
   					</vb:if>

5. Set options in AdminCP > Settings > Options > Solved Threads
   
6. Edit Solved Threads Permissions > Can Mark Threads as Solved for each usergroup.
   
7. To setup the forums it can be used in, follow the instructions in this post.

Upgrade

1. Re-import the product, product-solvedthreads.xml, with "Allow Overwrite" set to yes
2. Upload the files/folders in the "upload" folder, allowing it to overwrite the old files.

That's it! Enjoy!

Changelog
2.0.1 - July 30, 2010
- Changes to solved.php, to check for errors while saving thread, changed how threadinfo is pulled.
- Changes to bitfield_solvedthread.xml, removed the "install" attribute, doesn't seem to work anyway.
- Changes to product-solvedthread.xml, install process. Gave the install a small delay between rebuilding prefix datastore (after adding prefixset), and creating prefix.
- Changes to product-solvedthread.xml, plugin. Removed check for can_use_prefix function, as vB 3.8 + includes it, and this mod is for 4.0

2.0.0 - February 3, 2010
- Updated to vBulletin 4

1.1.2 - January 15, 2010
- Updated the product file, permissions, and phrases. This should, hopefully, resolve the blank page problems, along with the permission not showing up for usergroups.

1.1.1 - July 21, 2009
- Updated the product plugins and phrases, this should solve the blank page problem, and the problem of the option not showing in Admincp for ug permissions.

1.1.0 - April 14, 2009
- Small updates to xml file, no version # change. If it works for you, no need to do anything.
- If you have problems uninstalling, please see this post.

1.1.0 - April 12, 2009
- Updated for 3.7 & 3.8
- Now uses the built-in Thread Prefix system
- Instead of 'excluding' forums, since using the Thread Prefix system, you can choose which forums this will be shown in.

1.0.1 - July 12, 2007
- Added the ability to unsolve a thread.
- Added the ability to exclude this in certain forums
- Added the ability to change the prefix in that acp

1.0.0 - June 8, 2007
- Initial release.


If you use this modification, please >> Mark As Installed, and consider Nominate for MOTM and Support Developer <<



NOTE: This mod is marked "unsupported", but I'll try my best (as time permits) to help those who have marked as installed.

[Jman423]

Is this MOD still being improved? I would still love to see the features I suggested in the 3.x version... support for more than one prefix (Sold, Traded, Found) for classifieds forums, but with the same functionality that allows the thread poster to mark it in the same manner this MOD already does.

[mimi123]

i installed and followed all the instructions, added the code, uploaded fils to each specific folder. enabled product in admin cpanel-options, set YES in usergroup manager option.

the yes or no option for mark thread as solved has APPEARED in the usergroup manager, but when you go to the forum to mark post as solved it's not there in the thread tools.... please help

[Eric]

Tested on local install + two diff. dev. boards, everything appears to be working.

2.0.1 - July 30, 2010
- Changes to solved.php, to check for errors while saving thread, changed how threadinfo is pulled.
- Changes to bitfield_solvedthread.xml, removed the "install" attribute, doesn't seem to work anyway.
- Changes to product-solvedthread.xml, install process. Gave the install a small delay between rebuilding prefix datastore (after adding prefixset), and creating prefix.
- Changes to product-solvedthread.xml, plugin. Removed check for can_use_prefix function, as vB 3.8 + includes it, and this mod is for 4.0

[Eric]

Originally Posted by mimi123

i installed and followed all the instructions, added the code, uploaded fils to each specific folder. enabled product in admin cpanel-options, set YES in usergroup manager option.

the yes or no option for mark thread as solved has APPEARED in the usergroup manager, but when you go to the forum to mark post as solved it's not there in the thread tools.... please help

https://vborg.vbsupport.ru/showpost....83&postcount=7

[mimi123]

Originally Posted by SecondV

https://vborg.vbsupport.ru/showpost....83&postcount=7

Awesome! thank you very much

[karel1985]

Hi SecondV,

Just upgraded and works perfect.
I've made some customization, because i want the solved button more visible to my users.
( I provided you once ago the instruction for a previous version)

Its like this:
Solved button:
Attachment 120427

Unsolved button:
Attachment 120428

So if you see the unsolved button is slighty more to the right, due to the fact that in iE7, the 2 buttons are overlapped when normal added (in IE7 now they are both ok)

Its not yet perfect, but if you would like to have the code let me know.

Best regards,
Karel

[Yaung Sein]

Not work on vb 4.0.6

I have modify the SHOWTHREAD tamplate but nothing is appear in thread tools.

[argothiusz]

Is there a way to have this mod without manual template editing? I have so much theme and going over each of them everytime is not fun.

[Frondy]

Not working after upgrade to VB 4.0.6

I have replaced SHOWTHREAD to 4.0.5 version, and it works again

[Yaung Sein]

Originally Posted by Frondy

Not working after upgrade to VB 4.0.6

I have replaced SHOWTHREAD to 4.0.5 version, and it works again

I afraid to do that. I will wait for update one. It should be compatible for later vBulletin versions.