The Arcive of Official vBulletin Modifications Site.

Ultimate Side Columns · **Released**: 03-11-2007

Ultimate Side Columns
By Kerry-Anne www.peterska2.co.uk

Welcome to Ultimate Side Columns!

Introduction

Following the success of the left and right side column modifications, and building on their weaknesses, the Ultimate Side Columns system was born.

Ultimate Side Columns (USC) is your one stop shop for all your side columns needs. It is an easy to configure, all in one solution.

Features

USC uses a standard vBulletin Options Interface with minimal template editing involved, to display content in columns on your site.

USC controls both the left and right columns on your site, both of which work independently of each other, and can be displayed on a range of pages through some very simple options.

The only editing required for a standard installation is the header and footer template. For advanced users, the templates for the two columns can also be edited if required. Most users of this system will not need to do this.

Installation

Import the product-ka_ultimate_sidecolumns.xml file as a product through your product manager.

Open your header template and at the very end add

Code:

<!-- USC header edit start -->
<table width="100%" cellpadding="0" cellspacing="0" border="0">
<tr>
$usc_left
<td valign="top">
<!-- USC header edit end -->

Open your footer template and above

Code:

$spacer_close

add

Code:

<!-- USC footer edit start -->
</td>
$usc_right
</tr>
</table>
<!-- USC footer edit end -->

That is all your template editing done.

Now, go to vBulletin Options > Ultimate Side Columns Options

Here you can set which column you wish to use, and where you want it to appear. Content is also controlled through the options on this page. HTML is allowed in all content boxes.

Configuration

As there are a number of options available, this section explains them all.

First, you have the settings for enabling and disabling the two columns. As these work independently of each other, you can have the left column turned on, the right column turned on, or both turned on. If you need to turn them off for any reason, you can also turn them off here. Also, if you need to disable plugins for any reason, the code is completely disabled meaning that no unsightly white gaps are left on your pages.

Next, we have the width settings for the two columns. If you find that your columns are too wide, or too narrow, then they can be adjusted independently here.

The display pages settings allow you to control where your columns are displayed. These are pretty straightforward, with the exception of the setting adsense appropriate. This option stops the column from being displayed on the following pages in line with the adsense TOS:
- search
- search results
- registration
- contact us
- usercp
This is correct as of todays date. Any changes in the TOS for adsense will only be reflected in any updates as appropriate.

Next are the settings for the content of the left column, followed by the content of the right column. Both sections are prefixed by a blank setting. This is by design and there is not a bug with the code or anything missing.

Adding More Blocks

By design there are five (5) blocks per column. Some people may require more than this. To allow for this, comments have been added to both the usc_sidecolumn_left and usc_sidecolumn_right templates. The comments include a commented out section of code to use as a template for additional blocks. There are also some warning comments present in both templates. Take heed of these as editing other than the places indicated will result in the templates being malformed and the USC system not working correctly.

Support

Support for this modification is extremely limited. However, as everything apart from the two small template edits is controlled directly through the vBulletin options and not through template editing, issues should be minimal.

If you have any other combinations of pages that you would like to see available for the column options, please post them in the support thread ensuring that you add the title "USC Page Combination Request" to your post, or use this as the first line of your post ensuring that it is in bold text. This is very specific as due to the limited nature of support and time, the support thread will only be quickly skimmed through and therefore requests may be missed if it is not clear what they are.

The screenshots attached to this post and the next one show a range of pages with a range of column combinations. They are not labeled but they are pretty self explanatory.

Enjoy the USC system.

Kerry-Anne

PLEASE NOTE: This modification is unsupported. You may not receive a reply right after posting. Please try and help each other out. I do not support custom styles. If this does not work in your style, and you can confirm that it does not work in the default style (with a link and screenshot) then you will need to resolve the problem yourself. I also do not support any versions earlier than 3.6.5 in any way, shape or form. If you are using it on a version prior to 3.6.5 then no support at all will be provided.

Version 2.0 information

Version 2.0 has been released and can be found here:
https://vborg.vbsupport.ru/showthread.php?t=175181

kibosh · #**382** 01-04-2008, 05:19 PM

I am still having problems with this...

I am running VB 3.6.8 with SP2. I tried in my modified template, and thought maybe I did somehting that screwed it up. I then tried using my default style, which I had not altered. As soon as I put the code in the header and footer files, this happens.

If I view my home page, it looks fine. If I view a forum, and see the threads list, it looks fine. If I view a thread to see the posts, it "breaks" my layout. This occurs even with the columns turned off in the options.

Has anyone run into this??? What am I missing?

This is what it looks like with the right side column on:

Thanks!

solong2 · #**383** 01-06-2008, 09:59 PM

hello

when i install i get this

Empty document

kibosh · #**384** 01-06-2008, 10:52 PM

I just noticed my problem above only occurs if I set my main table width in pixels, instead of percent. Anyone have any ideas?

edward hamilton · #**385** 01-07-2008, 02:32 PM

I have also tried to use
<?php
echo $image;
?>

I also tried
<?php
echo "test";
?>

but php appears to be disabled in the side columns. What a shame.
Maybe I'm missing something?

zerokarma · #**386** 01-09-2008, 05:31 PM

So is there no solution on how to make PHP work with this mod?

I have a number of php items I would like to add but it won't work.

It can't be too complicated, there has to be a way to make it work.

Anyone?

tom212 · #**387** 01-10-2008, 07:55 PM

Installed and works perfectly!

Thank you!

applyimage · #**388** 01-10-2008, 09:57 PM

Everything looks fantastic BUT it stretches my showthread and it's appearing slightly distorted :[ any ideas?

Quote:

Originally Posted by kibosh

I am still having problems with this...

I am running VB 3.6.8 with SP2. I tried in my modified template, and thought maybe I did somehting that screwed it up. I then tried using my default style, which I had not altered. As soon as I put the code in the header and footer files, this happens.

If I view my home page, it looks fine. If I view a forum, and see the threads list, it looks fine. If I view a thread to see the posts, it "breaks" my layout. This occurs even with the columns turned off in the options.

Has anyone run into this??? What am I missing?

This is what it looks like with the right side column on:

Thanks!

Yes!!! exact same problem.

valdet · #**389** 01-10-2008, 10:04 PM

Quote:

Originally Posted by kibosh

I am still having problems with this...

I am running VB 3.6.8 with SP2. I tried in my modified template, and thought maybe I did somehting that screwed it up. I then tried using my default style, which I had not altered. As soon as I put the code in the header and footer files, this happens.

If I view my home page, it looks fine. If I view a forum, and see the threads list, it looks fine. If I view a thread to see the posts, it "breaks" my layout. This occurs even with the columns turned off in the options.

Has anyone run into this??? What am I missing?

This is what it looks like with the right side column on:

Thanks!

Quote:

Originally Posted by applyimage

Everything looks fantastic BUT it stretches my showthread and it's appearing slightly distorted :[ any ideas?

Yes!!! exact same problem.

Did you guys added this additional plugin

https://vborg.vbsupport.ru/showpost....&postcount=152

This should fix it..

Regards,
Val.

applyimage · #**390** 01-10-2008, 11:24 PM

Don't understand a word of the step by step Val

Step one I understand.

Step two, select the xml ive just already installed? I dont get it. Where's the additional plugin? =/

thanks.

valdet · #**391** 01-11-2008, 12:11 AM

Quote:

Originally Posted by applyimage

Don't understand a word of the step by step Val

Step one I understand.

Step two, select the xml ive just already installed? I dont get it. Where's the additional plugin? =/

thanks.

All of your steps are within the Add New Plugin page

Look at the screenie.

Good luck.
Val.

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.04883 seconds Memory Usage 2,321KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (3)bbcode_code (4)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (2)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!