The Arcive of Official vBulletin Modifications Site.

About Developer · **Released**: 03-25-2001

UPDATED! Not a new version number, but a bug fix.
Fixed another bug with using forum titles and included forums.

New update: *Actually* fixed the bug with the forums this time.

------------------------------------------------------------------------------------

It's my best work to date (if I do say so myself

) and I think you'll like it and like all the configuration you can do.

This image shows the script with all of the columns on, and parsing [code], smilies, and the post icon, as well as showing the forum title before the thread title.

This image shows the script with all the columns off except $lastpostdate, and the $tw (table width) set to 600, and $showdate set to 0 (to just show the last post time).

This image shows the same as #2, except $tw is blank (allowing the table to compact and remove the empty space automatically).

Hack version: 1.0.1

Changes since version 1.0.0: Fixed small bug.

Changes since version 0.1.0: Parses [ b], [ i], [ u], [ code], and [ quote] within the "last post". Displays the icon of the post, or the thread if there is no post icon. Parses smilies. New option to convert new lines to <br> so the post appears as the author wrote it (note: may cause problems if there are large breaks in posts).

Changes since version 0.0.2: New option to show the text of the last post of a thread (also option to limit the number of characters of the post displayed). New option to set the table width, as a percent, a number of pixels, or just let the table size naturally. New option to show just the time of the last post, instead of the date *and* the time. New option to show a thin line around the cells (cell spacing).

Changes since version 0.0.1: Include only specific forums, or set to allow all forums except certain excluded forums. New option to display a "Last post date" column with the last post date and time, formatted with your board's date & time setting. Fixed a bug with font and font size. Split the config into a separate file to make editing easier.

For version: v2 betas 3, 4, 5, RC1, RC2.

Files needed: last10.php, last10config.php (see attached zip file).

Files to edit: last10config.php (see attached zip file).

Possible file locations: Anywhere, as long as the relative path to config.php and the URL to your board are correct. Also, you must put last10.php and last10config.php in the same directory!

Instructions
1] Unzip the files last10.php and last10config.php to your hard drive.
2] Open last10config.php in an ASCII text editor, such as Notepad (Windows), SimpleText (Mac), EditPlus, UltraEdit, TextPad, etc. (DO NOT use WYSIWYG HTML editors such as FrontPage, HotDog, DreamWeaver, etc. They will in all likelyhood screw up the file! I will not be able to support you if you edit the file in one of these programs.)
3] Edit the variables at the top. These are:

$path > path to your config.php file (usually in the /admin directory) - NO TRAILING SLASH! and DO NOT PUT config.php at the end of it! ( e.g. forums/admin )
$url > URL to your board - NO TRAILING SLASH! ( e.g. http://www.mysite.com/forums )
$urlimg > URL to your board's images - NO TRAILING SLASH ( e.g. http://www.mysite.com/forums/images ).
$maxthreads > max threads to show. will show less if $last24 or $last7 limits it to less results than this number
$ob > determines the sort order of the list. replycount and views are numbers, lastposter is a name, title is the name of the thread, and lastpost is the last posts' date. set to one of the following: replycount , views , lastposter , title , lastpost (lastpost is most popular. it's the thread most recently replied to, then the second-to-last most recent, etc.)
$obdir > set to "desc" or "asc". which direction to sort? "desc" goes from bottom to top (9 to 1, z to a, etc.). "asc" goes top to bottom (1 to 9, a to z, etc.)
$last24 > set to 1 to limit the possible results to the last 24 hours; 0 for no limit (must set this to 0 if $last7 is set to 1)
$last7 > set to 1 to limit the possible results to the last 7 days; 0 for no limit (must set this to 0 if $last24 is set to 1)
$bc1 > first alt color (for the alternating colored rows)
$bc2 > second alt color
$hc > head background color (title, last poster, etc.)
$lc > text link color
$tc > text color
$f > font face
$fs > font size in points. 6 is on the small side, 10 on the large side. Put only a number in this - no "pt", "pts", or anything else!
$lastposter > show the "last poster" column? 1 = yes; 0 = no
$views > show the view count for each thread? 1 = yes; 0 = no
$replies > show the reply count for each thread? 1 = yes; 0 = no
$lastpostdate > show the last post date and time for each thread? 1 = yes; 0 = no
$len > maximum number of characters of the title to show. e.g. if the title is 60 characters and this is set to 25, only the first 25 characters of the title will be shown (followed by ...)
$excludeforums > List certain forums to be excluded. Best used if you have a large number of forums you *do* want included and only a few that you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $includeforums! Use one or the other.
$includeforums > List certain forums to be included. Best used if you have a small number of forums that you want included and a large number you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $excludeforums! Use one or the other.
$showmessages > If you want to show the last post of the thread as well, set this to 1. You can limit the number of characters displayed in $lplen below.
$lplen > If you specify a number here, any post that has more than $lplen number of characters will be reduced to this number and "..." added to the end of it. If you don't want to use this feature, leave it blank e.g. "" - remember though that if $showmessages is set to 0, this won't do anything.
$tw > If you want to specify the width of the table, you can set it as a percent e.g. 95% or as a number of pixels e.g. 300 or just leave it blank and the table will size itself.
$showdate > If you want to show the date *and* the time, set this to 1. If you want to just show the time, set this to 0.
$cs > If you want a thin line around your cells, set this to 1 (or higher - experiment!). Set to 0 for no line.
$nb > if you want breaks in text to appear as such, set this to 1. otherwise set it to 0 (this may cause problems if there are large breaks in the text)
$showforumtitle > if you want to show the forum title, linked to that forum, for each thread also (forum title: thread title) then set this to 1. otherwise set it to 0.
$showicon > if you want to show the icon the author chose for their post, set this to 1. otherwise set it to 0.

4] Upload both last10.php and last10config.php to your website. You can include last10.php as follows. To include it on a PHP-parsed page (.php, .php3, .phtml, etc.):
<? include("last10.php"); ?>
To include it on a server-parsed page (.shtml, .shtm, .ssi, etc.):


Instructions are also included in the zip file (last10.txt).

FEEDBACK WANTED!

Likes/dislikes/modification requests all gladly accepted!

Please DO NOT contact me via IM or PM about this hack. Post your problem/question here and I will try to help you.

FrankR310 · #**382** 08-11-2002, 05:50 PM

thank you this works well...I used the suggestion noted in a previous post to use vb templates to show a page called activetoday.php and it uses only 6 queries!

just notice one issue though; i have my board set so that unregistered users can post and it does not pull these posts...not sure if it's just anyone who's unregistered or those who dont put a name and posts as "unregistered".

any suggestions on how i might correct this?

thanks for the hack!

pdatoon · #**383** 08-16-2002, 03:25 PM

is it possible to have also the name of the category beside the title?

Aaron RV · #**384** 08-17-2002, 10:25 AM

Quote:

Originally posted by tubedogg
UPDATED! Not a new version number, but a bug fix.
Fixed another bug with using forum titles and included forums.
New update: *Actually* fixed the bug with the forums this time.
------------------------------------------------------------------------------------

It's my best work to date (if I do say so myself ) and I think you'll like it and like all the configuration you can do.

This image shows the script with all of the columns on, and parsing [code], smilies, and the post icon, as well as showing the forum title before the thread title.

This image shows the script with all the columns off except $lastpostdate, and the $tw (table width) set to 600, and $showdate set to 0 (to just show the last post time).

This image shows the same as #2, except $tw is blank (allowing the table to compact and remove the empty space automatically).

Hack version: 1.0.1

Changes since version 1.0.0: Fixed small bug.

Changes since version 0.1.0: Parses [ b], [ i], [ u], [ code], and [ quote] within the "last post". Displays the icon of the post, or the thread if there is no post icon. Parses smilies. New option to convert new lines to <br> so the post appears as the author wrote it (note: may cause problems if there are large breaks in posts).

Changes since version 0.0.2: New option to show the text of the last post of a thread (also option to limit the number of characters of the post displayed). New option to set the table width, as a percent, a number of pixels, or just let the table size naturally. New option to show just the time of the last post, instead of the date *and* the time. New option to show a thin line around the cells (cell spacing).

Changes since version 0.0.1: Include only specific forums, or set to allow all forums except certain excluded forums. New option to display a "Last post date" column with the last post date and time, formatted with your board's date & time setting. Fixed a bug with font and font size. Split the config into a separate file to make editing easier.

For version: v2 betas 3, 4, 5, RC1, RC2.

Files needed: last10.php, last10config.php (see attached zip file).

Files to edit: last10config.php (see attached zip file).

Possible file locations: Anywhere, as long as the relative path to config.php and the URL to your board are correct. Also, you must put last10.php and last10config.php in the same directory!

Instructions
1] Unzip the files last10.php and last10config.php to your hard drive.
2] Open last10config.php in an ASCII text editor, such as Notepad (Windows), SimpleText (Mac), EditPlus, UltraEdit, TextPad, etc. (DO NOT use WYSIWYG HTML editors such as FrontPage, HotDog, DreamWeaver, etc. They will in all likelyhood screw up the file! I will not be able to support you if you edit the file in one of these programs.)
3] Edit the variables at the top. These are:
$path > path to your config.php file (usually in the /admin directory) - NO TRAILING SLASH! and DO NOT PUT config.php at the end of it! ( e.g. forums/admin )

$url > URL to your board - NO TRAILING SLASH! ( e.g. http://www.mysite.com/forums )

$urlimg > URL to your board's images - NO TRAILING SLASH ( e.g. http://www.mysite.com/forums/images ).

$maxthreads > max threads to show. will show less if $last24 or $last7 limits it to less results than this number

$ob > determines the sort order of the list. replycount and views are numbers, lastposter is a name, title is the name of the thread, and lastpost is the last posts' date. set to one of the following: replycount , views , lastposter , title , lastpost (lastpost is most popular. it's the thread most recently replied to, then the second-to-last most recent, etc.)

$obdir > set to "desc" or "asc". which direction to sort? "desc" goes from bottom to top (9 to 1, z to a, etc.). "asc" goes top to bottom (1 to 9, a to z, etc.)

$last24 > set to 1 to limit the possible results to the last 24 hours; 0 for no limit (must set this to 0 if $last7 is set to 1)

$last7 > set to 1 to limit the possible results to the last 7 days; 0 for no limit (must set this to 0 if $last24 is set to 1)

$bc1 > first alt color (for the alternating colored rows)

$bc2 > second alt color

$hc > head background color (title, last poster, etc.)

$lc > text link color

$tc > text color

$f > font face

$fs > font size in points. 6 is on the small side, 10 on the large side. Put only a number in this - no "pt", "pts", or anything else!

$lastposter > show the "last poster" column? 1 = yes; 0 = no

$views > show the view count for each thread? 1 = yes; 0 = no

$replies > show the reply count for each thread? 1 = yes; 0 = no

$lastpostdate > show the last post date and time for each thread? 1 = yes; 0 = no

$len > maximum number of characters of the title to show. e.g. if the title is 60 characters and this is set to 25, only the first 25 characters of the title will be shown (followed by ...)

$excludeforums > List certain forums to be excluded. Best used if you have a large number of forums you *do* want included and only a few that you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $includeforums! Use one or the other.

$includeforums > List certain forums to be included. Best used if you have a small number of forums that you want included and a large number you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $excludeforums! Use one or the other.

$showmessages > If you want to show the last post of the thread as well, set this to 1. You can limit the number of characters displayed in $lplen below.

$lplen > If you specify a number here, any post that has more than $lplen number of characters will be reduced to this number and "..." added to the end of it. If you don't want to use this feature, leave it blank e.g. "" - remember though that if $showmessages is set to 0, this won't do anything.

$tw > If you want to specify the width of the table, you can set it as a percent e.g. 95% or as a number of pixels e.g. 300 or just leave it blank and the table will size itself.

$showdate > If you want to show the date *and* the time, set this to 1. If you want to just show the time, set this to 0.

$cs > If you want a thin line around your cells, set this to 1 (or higher - experiment!). Set to 0 for no line.

$nb > if you want breaks in text to appear as such, set this to 1. otherwise set it to 0 (this may cause problems if there are large breaks in the text)

$showforumtitle > if you want to show the forum title, linked to that forum, for each thread also (forum title: thread title) then set this to 1. otherwise set it to 0.

$showicon > if you want to show the icon the author chose for their post, set this to 1. otherwise set it to 0.

4] Upload both last10.php and last10config.php to your website. You can include last10.php as follows. To include it on a PHP-parsed page (.php, .php3, .phtml, etc.):
<? include("last10.php"); ?>
To include it on a server-parsed page (.shtml, .shtm, .ssi, etc.):


Instructions are also included in the zip file (last10.txt).

FEEDBACK WANTED! Likes/dislikes/modification requests all gladly accepted!

Please DO NOT contact me via IM or PM about this hack. Post your problem/question here and I will try to help you.

No problems with 2.2.6?

Thank you.

Gutspiller · #**385** 08-17-2002, 01:27 PM

Quote:

Originally posted by pdatoon
is it possible to have also the name of the category beside the title?

yes, but if you have them turned on, it conflicts if you have another post hack installed on the same page. You can see it here: http://www.3dNewz.com The top links to the latest 6 threads on the forumz are the ones that cause a problem if you change the setting to show the catagory the post is in. The 6 latest posts is another hack, it's not this one, but all the ones down the side of the page are this hack.

Maddog417 · #**386** 08-26-2002, 06:49 PM

I think I've almost got this hack to work, but I'm being denied access to MySQL. Here is the error I'm getting:

Quote:

Warning: Access denied for user: 'warfarehq@localhost' (Using password: NO) in /home/www/warfarehq/forums/admin/last10.php on line 14

Warning: MySQL Connection Failed: Access denied for user: 'warfarehq@localhost' (Using password: NO) in /home/www/warfarehq/forums/admin/last10.php on line 14
Can't open connection to MySQL

Can anyone help? Thanks.

fonzerelli_79 · #**387** 08-26-2002, 10:49 PM

sorry to be a pain but for some reason im getting this

Quote:

X-Powered-By: PHP/4.1.2 Connection: close Content-Type: text/html
Warning: Access denied for user: 'httpd@localhost' (Using password: NO) in /../affiliate- review.com/last10.php on line 14

Warning: MySQL Connection Failed: Access denied for user: 'httpd@localhost' (Using password: NO) in /......./affiliate-review.com/last10.php on line 14
Can't open connection to MySQL

kjetilpa · #**388** 08-28-2002, 05:11 PM

Is it possible to modify this for use with polls also?

Kjetilpa

Cell Block · #**389** 09-07-2002, 05:59 PM

Is it possible to use this on a non-VB page on another server?
I share a board with another site. The site is hosted on their server, I'm attempting to have the last posts shown on a non-VB page on MY server.. Is this possible?

thanks.

fonzerelli_79 · #**390** 09-12-2002, 11:54 AM

does anyone know why im getting this

X-Powered-By: PHP/4.1.2 Connection: close Content-Type: text/html

at http://www.affiliate-review.com

i cant seem to find the code in last10.php

any help would be appreciated

`

Darren Lewis · #**391** 09-12-2002, 07:26 PM

Quote:

Originally posted by Cell Block
Is it possible to use this on a non-VB page on another server?
I share a board with another site. The site is hosted on their server, I'm attempting to have the last posts shown on a non-VB page on MY server.. Is this possible?

thanks.

Try https://vborg.vbsupport.ru/showthrea...threadid=39023

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.06012 seconds Memory Usage 2,344KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (5)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (2)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!