Version: 4.2.120, by Omranic
Developer Last Online: Sep 2021
Category: Administrative and Maintenance Tools -
Version: 4.x.x
Rating:
Released: 01-05-2010
Last Update: 01-09-2013
Installs: 134
DB Changes Uses Plugins Auto-Templates
Re-useable Code Additional Files Translations
No support by the author.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!.................. Brought to you by PHP KingDom (www.phpkd.net) ..................!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The 'Ultimate' edition became Opensource!!
Get all the premium features for free now...
Please remember to click Mark as Installed if you use this product.
Support requests from members who have not marked this as installed will be considered low priority.
Name: PHPKD - vB Link Verifier Bot 'Ultimate' Version: 4.2.120
Description: This product extract sharing links of hundreds of sharing hosts, and verifies them; If they're "Alive" the post will pass, otherwise it will be punished. (ex: Hotfile, Mediafire, Rapidshare, 4shared, Depositfiles, Filefactory, ...etc).
Compatible with: All 4.0.x/4.1.x/4.2.x vBulletin versions.
Depends on & uses default vBulletin techniques with full compatibility.
Board Load Zero Queries, queries executed only when the scheduled task run.
The cronjob (scheduled Task) logs every run details in "Scheduled Task Log", so you can review it later within the log viewer.
The product's code base is very solid, and is very rich as well with a 'plug-and-play' architecture for easier expansion & for much more flexibility.
Auto generate pretty nice reports for instant/later review, these reports can be displayed in real time while running the scheduled task, sent as a private/email message, post as a thread/reply.
Specific Features:-
AdminCP Options:
Administrator Permissions:
Can Administer "PHPKD - vB Link Verifier Bot"
General Settings:
Product Active
Choose whether the product "PHPKD - Link Verifier Bot" is active or not (Global On/Off Switch).
Include/Exclude Users
You can specify certain users to check their posts against dead links, or to exclude others' posts from being checked at all.
Select "Include All Users" to check all users' posts, or select "Include Specific Users" to check only those specific users' posts -defined in the following setting-, or select "Exclude Specific Users" to check all users' posts except those specific users' posts -defined in the following setting-.
Included/Excluded Users
If you have chosen "Include Specific Users" OR "Exclude Specific Users" from the above setting, then you have to enter those specified user IDs here in this setting's field. Separate user IDs by normal English comma.
Include/Exclude Usergroups
You can specify certain usergroups to check their posts against dead links, or to exclude others' posts from being checked at all.
Select "Include All Usergroups" to check all usergroups' posts, or select "Include Specific Usergroups" to check only those specific usergroups' posts -defined in the following setting-, or select "Exclude Specific Usergroups" to check all usergroups' posts except those specific usergroups' posts -defined in the following setting-.
Included/Excluded Usergroups
If you have chosen "Include Specific Usergroups" OR "Exclude Specific Usergroups" from the above setting, then you have to choose those specified usergroups from the list displayed. Note that you can select multiple options by holding "CTRL" key while selecting.
Include/Exclude Forums
You can specify certain forums to check their posts against dead links, or to exclude others' posts from being checked at all.
Select "Include All Forums" to check all forums' posts, or select "Include Specific Forums" to check only those specific forums' posts -defined in the following setting-, or select "Exclude Specific Forums" to check all forums' posts except those specific forums' posts -defined in the following setting-.
Included/Excluded Forums
If you have chosen "Include Specific Forums" OR "Exclude Specific Forums" from the above setting, then you have to choose those specified forums from the list displayed. Note that you can select multiple options by holding "CTRL" key while selecting.
Time/Date Cutoff Mode
You can force this product to process only posts in a specific time frame.
You've two modes to choose from:
Last X Days: This mode will check all posts posted only in the last X days.
Before Specific Date: This mode will check all posts posted before that specific date.
After Specific Date: This mode will check all posts posted after that specific date.
Between Two Specific Dates: This mode will check all posts posted between those two specific dates.
After choosing your preferred mode, you have to enter the appropriate value in the following setting according to the declaration defined down there. If you do not want to use the Cutoff feature at all then enter "0" in the following setting's field "Time/Date Cutoff Value".
Time/Date Cutoff Value
To force this product to process only posts in a specific time frame, choose your preferred mode in the above setting, then enter the appropriate value here in this setting's field according to the following definition:
Last X Days: Enter a correct positive integer value for that period in days to check posts posted within last X days.
Before Specific Date: Enter a correct date in the format (yyyy-mm-dd) to check posts posted before it.
After Specific Date: Enter a correct date in the format (yyyy-mm-dd) to check posts posted after it.
Between Two Specific Dates: Enter two correct dates in the format (yyyy-mm-dd|yyyy-mm-dd) -note the separator symbol '|' (without quotes)- to check posts posted between them. Make sure to set the older date first then the newer.
To turn off the "Time/Date Cutoff Mode" feature totally, enter "0" in this setting's field.
Checked Protocols
Which internet protocols should be checked?
HTTP
HTTPS
FTP
Checked BBCodes
Select which BBCodes should be scanned. Note that URL tags are checked by default.
Basic BB Code
Color BB Code
Size BB Code
Font BB Code
Alignment BB Code
List BB Code
Link BB Code
Code BB Code
PHP BB Code
HTML BB Code
QUOTE BB Code
HIDE BB Code
CHARGE BB Code
Excluded Thread Modes
Specific thread modes can be excluded from being checked. By default all threads are checked regardless of it is mode. To exclude certain thread mode, choose it from the list.
Opened
Closed
Moderated
Sticky
Deleted
Redirected
Excluded Post Modes
Specific post modes can be excluded from being checked. By default all posts are checked regardless of it is mode. To exclude certain post mode, choose it from the list.
Opened
Moderated
Deleted
Check Existing Posts
Should existing posts be checked? If yes, then which of it should be? Only thread's head (first post), or all posts within? Turning this option 'OFF' means that the scheduled task (cronjob) will be completely useless, it will not do any work at all. Only new & edited posts will be checked if activated in the following settings.
Options: [None | All Posts | Thread's First Post]
Check New Posts
Should new posts be checked live (on real time)? If yes, then which of it should be? Only thread's head (first post), or all replies as well? Turning this option 'OFF' means that the scheduled task (cronjob) will be completely useless, it will not do any work at all. Only new & edited posts will be checked if activated in the following settings.
Options: [None | All Posts | Thread's First Post]
Check Edited Posts
Should edited posts be checked live (on real time)? If yes, then which of it should be? Only thread's head (first post), or all replies as well? Turning this option 'ON' may cause users with low/limited internet connections to have some issues and may not be able to post, specially if their post contains many links to be checked.
Options: [None | All Posts | Thread's First Post]
Maximum Checked Links Per Post
How many links should be checked per post? If any post contains more than that defined limit, then those 'over limit' links will be ignored & will not be checked; only the first X links (as defined here) will be checked. Enter "0" for UNLIMITED.
Critical Limit/Red Line
Posts can be punished because of high percentage of dead links within. Define the "Critical Limit/Red Line" percentage here as a positive integer value (without any symbols). This "Critical Limit/Red Line" is the percentage that if dead links reaches or exceeded within a post, then that post will be punished. Notes & Examples:
"10" means if dead links within a post reaches or exceeded 10% of all included links it will be punished. If a post has less than 10% of dead links, then it will pass as valid without punishment.
"0" means that all links per post should be valid & alive (no dead links allowed, if just one link is dead the post will be punished); While "100" means the opposite, it means that all links within a post should be dead to be punished, that means if there is only one link alive & the rest are dead, the post will pass as valid without punishment.
If any post has only 5 links within it to be checked, that means each link represents 20% from all checked links. It means also if only one link is dead & you have set this setting to '10%' the expression will evaluate as true & will punish that post since it has 20% of dead links.
Check Succession Period
Successive checks for same posts can be separated by a certain period of time, so those 'checked recently' posts did not checked every time the script runs. Same posts can be checked multiple times, but with at least 1 day between each two successive checks. Define how many days should separate each two successive checks for the same post, or enter "0" to check posts ONLY ONCE. Note: "14" means your checked posts will be checked again every fourteen days (two weeks). "0" or a high Value usually recommended specially for large boards.
Checked Posts Per Batch
It is recommended to define a specific low number of posts to process in each run to prevent any possible timeout or Memory/CPU exhausting during the execution process. A Lower Value usually recommended specially for boards that has long posts with many links. There is other important factors that have strong affect as well such as: "Time/Date Cutoff Mode", "Time/Date Cutoff Value", "Check existing posts", "Maximum Checked Links Per Post", "Check Succession Period"; So please take care & try to set a logical acceptable value for each of these settings to avoid any expected/unexpected issues. You are the best one who knows your board & you are the one who can determine which suits you & your board according to your board's activity/content/requirements.
Remote Functions Maximum Redirections
The maximum amount of HTTP redirections to follow.
Remote Functions Execution Timeout
The maximum number of seconds to allow remote functions to execute.
Remote Functions Maximum Response Size
The maximum allowed size of response to accept, enter value in bytes.
Required Sharing Links
You may force users to post 'supported' sharing links within their posts in order to submit their posts, otherwise they will get an error message.
You can select which forums would you like to force users include 'supported' sharing links within their posts.
Reporting Settings:
Reports Staff Handler
Reports posted in forums or sent as PMs to both staff and normal users requires a valid staff member username to use as a poster & sender for these reports. Enter a valid staff member username with appropriate privileges here in this setting's field. Note: If this username is invalid or does not has appropriate privileges, then all "PM/Reply/Thread Reports" will not work until it is corrected, however "Email Reports" does not affected by this option and will keep working regardless of this option's value.
Staff Reports
After each run of the script, it is possible to auto generate final reports for staff using any of the following methods: (PM, Email, New Reply, New Thread). Select your preferred methods.
Send Private Message
Send Email Message
Post New Thread
Post New Reply
Sending Staff Reports
In case you want to send reports to staff via PM or Email, you have the ability to choose which staff should receive those reports.
Send Reports To Moderators Only
Send Reports To Moderators & Administrators
Staff Reports Mode
Staff reports can be sent in certain conditions, which conditions should staff reports sent in?
Select the appropriate option:
Always send: always send regardless there is checked/dead/punished posts or not.
Send Only If There is Checked Posts: send only if there is checked posts, regardless there is dead/punished posts or not.
Send Only If There is Dead Posts: send only if there is checked posts with dead links regardless it exceeds the critical limit or not -punished or not-.
Send Only If There is Punished Posts: send only if there is checked posts with dead links that exceeds the critical limit, and thus punished.
Note: Punished posts implicitly included within dead posts.
User Reports
After each run of the script, if there is punished posts: it is possible to auto generate simple reports to their owners using any of the following methods: (PM, Email) telling them that some of their posts contains some dead links. Select your preferred methods.
User Reports Mode
User reports can be sent in certain conditions, which conditions should user reports sent in?
Select the appropriate option:
Send Only If There is Dead Posts: send only if there is checked posts with dead links regardless it exceeds the critical limit or not -punished or not-.
Send Only If There is Punished Posts: send only if there is checked posts with dead links that exceeds the critical limit, and thus punished.
Note: Punished posts implicitly included within dead posts.
Reports: Included Posts
Which posts to include in the generated reports?
Select the appropriate option:
Checked Posts Only: include checked Posts, ignore punished posts.
Punished Posts Only: include punished Posts, ignore checked posts.
Checked Posts & Punished Posts: include both checked Posts and punished posts as well.
Reports: Included Links
All Links
Alive Links
Dead Links
Down Links
None
Staff Report Forum
If "Post New Thread" staff report method is enabled, then a forum should be selected to post those threads in.
Staff Report Thread
If "Post New Reply" staff report method is enabled, then a thread should be selected to post those replies in. Valid thread ID is required.
Reports Phrases
Modify and localize reports' subject & message as preferred.
Rest features & screenshots in the next posts ..!!
Threads don't seem to be trashed into my trash forum for some reason.
Could this be because all my members place links inside code tags or something?
No, the current release do support all default vBulletin tags including [ CODE ] tags.
Make sure that the punishment forums (to which threads has to be moved) can contain new threads, and of course don't forget to enable the feature it self from the product's setting.
Quote:
Originally Posted by dcuellar
ummm....No credit to the person who paid to have this done...lol
Appreciation goes to you "Danilo" for supporting the original idea of the product, many thanks for your previous support .
Quote:
Originally Posted by dcuellar
What I've noticed is that this mod does not work with any hide hack or with links that are posted with code tags.
Would be nice to have that corrected. I have content merchants from vbcredits which allows user to use vbcredits to reveal links.
No, that's not the case.
The current release of both the 'Lite' & 'Ultimate' editions support scanning & checking links within any default vBulletin tag including [ CODE ], and the 'Ultimate' edition also support [ CHARGE ] tag.
ok i m gonna try this free version.. if i like it... i m gonna go for ultimate version..
Thanks
You're welcome with either the free or the ultimate edition.
Please don't hesitate to post your feedback so we can develop the product & make it better :up:.
Quote:
Originally Posted by tafreeh
ok i just tested this hack.. apparently its working fine...
But
it also checking those threads where no links are exist... and if RS link is dead, its taking long to verify..
plus, id does not mark in thread, that if this thread is been checked or not..
AT the end, it did not send any emails or pm niether move any threads...
please advice
Well, let's see your notes one by one:
Yes, it checks all threads either it contains links or not. The current release of the bot doesn't know if that specific post contains a links or not, how should it know !?
Checking time depends on the connection between your host & the checked rapidshare hosts, it's something far from the bot itself.
It does mark checked posts, but after checking all posts in that specific batch. The upcoming ultimate release should contain significant changing on how & when the bot should mark a post as checked.
The lite edition doesn't send email reports, it does send PM reports only & you've to setup settings well & you should enter the username of the sender in "Reports Handler Staff User" setting.
Please if you've any other issues, don't hesitate to post it.
Quote:
Originally Posted by losedude
So what happens if one of the file hosters changes their system ? Are there any fail safes to make sure that all my threads don't get binned ?
Currently unfortunately no, there is no way for the bot to recognize if the specific host's website has been re-designed & totally changed or not. And as soon as the status messages that's appear with each host isn't limited then do do check this manually & if there's any updates we do update the bot & release a new version with those updates. But just to know, as I see it's not a common task for a host's website to be fundamentally changed, so it's not a periodically task & you shouldn't worry about it.
Database error in vBulletin 4.0.1:
Invalid SQL:
UPDATE vb_post
SET phpkd_vblvb_lastcheck = 1265085275
WHERE postid = 257125;
MySQL Error : MySQL server has gone away
Error Number : 2006
Request Date : Monday, February 1st 2010 @ 11:34:35 PM
Error Date : Monday, February 1st 2010 @ 11:41:50 PM
Script : http://forum.info/cron.php?rand=1265085262
if i may say.this by no means just a shameless plug but when i first got hold of this mod i was beyond ecstatic of its capabilities even for a lite version.
i just had to buy the ultimate version, and that too took this product to a whole new level, the amount of settings it provides is a tweakers dream.
if your like me and handle a site where massive amount of links need to be check this is the right mod for it. and if thats not enough the level of support phpkd supplies is down right outstanding. thier ability to go beyond the call of duty to satisfy their customers is amazing if not outstanding.
if you like the lite version, you will love the ultimate release. IMO $10 is a small price to pay for what this mod does.
Bought and installed.
Have a little question. If I set the punishment is Move thread, will this mod automatic move the punished threads back to original location when they have been updated.
PHPKD - vB Link Verifier Bot 'Ultimate' Details »»
About Developer
Visit Web Site
DB Changes 
No support by the author.
01-25-2010, 07:11 PM
.
