Miscellaneous Hacks - Ventrilo Status Block for vBulletin and vBadvanced

This mod has been replaced! https://vborg.vbsupport.ru/showthread.php?t=240495

Author:

Crimm - Included because I have been finding my mods all over the internet taken via RSS :P

Description:

This will place a Ventrilo status block in a column of your vbadvanced installation. It uses some of the files found on Ventrilo.com's download section plus things I have learned to integrate them into vBulletin. I just thought I would share, because I couldn't find anything like this when I was looking 5 or 6 months ago. I have done searching all day today and haven't found anything similar. If someone has already released this mod, then please let me know via link.

NOTE: Debug option may display server information. Hide the block to non-admins when debugging the block or else malicious individuals could get their hands on your server information.

Difficulty:

5/10 - It's mainly normal installs, but it's difficult to debug this ventrilo status script.

Requirements:

• vBulletin 3.7+
• vBadvanced CMPS - vbadvanced.com
• Ventrilo Server
  
• PHP SAFE MODE OFF http://www.php.net/manual/en/features.safe-mode.php - Edit php.ini and turn off

Safe mode being off is very important and will be the biggest problem people have with this script. To test and see if you pass this requirement follow these steps:

1. Create a file called info.php
2. Put this line inside it:

<?php phpinfo(); ?>

3. Upload it to your website.
4. Visit the new page by going to: http://yoursite.com/info.php or wherever you uploaded it.
5. Look for a line that says: "safe_mode"
6. If that says - On next to it... then contact your host, because you can't go any further.

**I was going to try and implement a check, but can't seem to figure out how to do that.**


Support:

Here or my site: mmo-mods.com I spend the majority of my online time at my site so feel free to stop by and ask for help.

FAQ's:

Q: Yes I have seen this mod: https://vborg.vbsupport.ru/showthrea...age=5&t=113432 Isn't this the same mod?

A: No, it isn't like that. It adds a block using the code from ventrilo.com and modules from vbadvanced. - See screenshots.

Q: I'm getting this: CVentriloStatus->Request() failed. PHP Unable to start external status process. Or this error: (Since friendly errors were turned on in version .2) "Can't find or run ventrilo_status"

A: Please post and I will try to help, best bet is to visit my site where this information is being culminated as a community and where I spend most of my time. http://mmo-mods.com. Experience tells me it has to be one of these three things:

1. Permissions: Make sure to chmod your ventrilo_status to 755 if you are on linux. If you are on Windows, make sure that whatever is running your IIS process can execute ventrilo_status.exe
2. You are in PHP safe mode. This won't work in PHP Safe mode.
3. It's a path problem - I made everything relative. I have included some testing scripts, please use them as directed below.
4. Make sure that you have chosen the correct environment set in your settings.

Q: I'm getting this error: "No response."

A: Check your Server information. You can obtain this from your ventrilo host.

Q: I'm getting this error: "Unknown Error."

A: Copy/Paste the exact error and post it here with your domain so that I can take a look

Q: Whats the best way to debug an issue?

A: I included a debug option in the Ventrilo Status Block Options in vBulletin options, but note be very careful as it displays server information that could be useful to hackers. Make sure to hide the block from non-admins when you have this option checked.

Installation:

1. Download the ZIP file attached
2. Upload the includes folder to your forum folder
3. Browse to the includes/ventrilo folder and chmod ventrilo_status to 755 for linux and check execute permissions if you are using Windows.
4. Go to admincp -> Products -> Install the product in the zip file
5. Go to admincp -> vbacmps -> Download/Upload modules and Upload the module that is in the zip file.
6. Click continue after uploading and active it on the pages that you want, and the column that you want.
7. Go to Admincp -> vb options -> Ventrilo Block Settings
8. Put in your server information and check your environment and other settings
9. If you get an error check the FAQ's above before asking for help.
10. Problems? Post here No problems? Then you are good to go.

Crimm notation on block:

Please leave the notation back to me in the block to help spread the word. I left it small, so it wouldn't bother your site. Us freelancers have to get some fame somehow

Mark as installed:

Please mark as installed if you use this script, and I will assist you with a higher priority than everyone else.

Revisions:

Version 1: Beta
Version 2: Fixed issue with Comments from ventrilo files showing in blocks
Version 3: Attempt to fix error when installing product.
Version 4: Fixed an error where some people get a message about global.php being redeclared. https://vborg.vbsupport.ru/showpost....4&postcount=28

[Crimm]

Thank you!

[qberty]

I'm not trying to rush you or anything, But how long would it take to make a status block Just for VB? Love how you made it look.

[Crimm]

It wouldn't take much.

The hard part would be figuring out a way to make it fit in the thousands of styles that are out there.

Are you guys wanting it to be a column like this one?

[Crimm]

BTW I have now made a mod that will show ventrilo status without needing vbadvanced.

I'm doing some more testing and should be posting it today.

[Crimm]

https://vborg.vbsupport.ru/showthread.php?t=205042

For those of you that might be subscribed to this waiting

[Trek]

Nice work, you should combine the two. I used the original mod you referenced as well and made my own VBA/vBulletin mod, just never released it.

You'rs is better in that it shows the channels, etc. But having the ability to turn on/off the different parts (vba module/forum display part) would make me quit using mine and use yours. =)

[Crimm]

Thank you very much!

They are the exact same overall.

https://vborg.vbsupport.ru/showthread.php?t=205042 - This one just uses plugins to call the files needed and uses styles to output.

https://vborg.vbsupport.ru/showthread.php?t=204471 - Uses vBadvanced's module styles to output.

But your right... That would be sweet. I'll look into that. Thanks!

[SuperTaz]

I uploaded the files, CHMOD 755 the vent_status file and also installed the product. Everything there is fine. When I upload the module I get this error after I refresh:

Fatal error: Cannot redeclare wwu002activityupdate() (previously declared in /home/public_html/forums/global.php(400) : eval()'d code:445) in /home/public_html/forums/global.php(400) : eval()'d code on line 494

Any thoughts as to why the module creates this error?

[CFodder]

All the install went just fine, however am getting no response, please check your settings. Have tried with the server admin and the login passwords, and even no password but still get the same error. The server is hosted with GameServers, would the status password be different to the ones I've tried above?

It shows the server details and the Lobby, our initial channel but nothing under that, pse see the screenshot I've attached.

Great mod btw, been waiting for one like this for a while

[Crimm]

Originally Posted by Warden-B-

I uploaded the files, CHMOD 755 the vent_status file and also installed the product. Everything there is fine. When I upload the module I get this error after I refresh:



Any thoughts as to why the module creates this error?

Because my code calls global.php to work.

hmmm I wonder if you have another mod that is calling it to.

Let me test an idea and I'll be in touch.