Allow Usergroups to Post HTML

Just like the name says, this ultra-simple little Product will allow you to specify Usergroups that may post in HTML and have that HTML be parsed...SOME PEOPLE ARE HAVING TABLE PROBLEMS - THIS IS UNSUPPORTED USEAGE OF THE MODIFICATION AND I AM UNABLE TO ASSIST!

***BE AWARE THAT INDISCRIMINATE USE OF THIS HACK IS RISKY - RESTRICT IT TO ONLY THOSE USERGROUPS YOU TRUST ABSOLUTELY***

The scary message above is to make sure you are aware that enabling HTML for any group opens you up to security issues. This is why it is not a feature of Stock vB, probably.

I decided I needed to have the ability to post in HTML because I just installed ZT's RSS Feeds hack, and the ones I got from Google looked all horrible.

Now updated to be controlled by a Setting in Usergroup Manager, it's phrased and even works in editpost.php (preview) in WYSIWYG and normal modes, AND the Forum Rules shows HTML is ON.

This will not work retroactively. That is, if a User posted something in HTML before they were given the ability, that post has to be edited by that member (or someone else with HTML ability) in order to be parsed. I am assuming this is due to post caching.

Many thanks to Kirby for prodding me to figure it out by myself and not just telling me what to do.

A "demo" is here..html is OFF in that Forum, but the post is made by an Admin, so the HTML is parsed.

[zooki]

it doesnt work !! I am on 3.6.2 and i just wanted it for myself as the admin.

I have checked the option in the control panel, and it does say HTML ON in the bottom of the screen....... But, when i try posting html, it doesnt work.

HTML works if i change the forum properties. But, not with this hack

[mihai11]

Originally Posted by zooki

it doesnt work !! I am on 3.6.2 and i just wanted it for myself as the admin.

I have checked the option in the control panel, and it does say HTML ON in the bottom of the screen....... But, when i try posting html, it doesnt work.

HTML works if i change the forum properties. But, not with this hack

What HTML you tried but it is not working ? I only tried to post some <a> tags with different targets, something like:

<a href="http://somepage.name" target="_top"> Page </a>

and that it is working.

[NolF]

Tested on 3.6.4 and it works

I have a problem, don't know if its as a result of using this hack or vbulletin itself. What happens is, After posting tables iamges etc... if I try to Advance edit it, or select the alternative view (the one which shows you the post code) all table codes are gone so after saving the editing, The pots loses all its structure

Example:
Before

<table border=3 width=100% bordercolor=#1066FF bgcolor=#FFFFFF cellspacing=0 cellpadding=0><tr><td width=100% colspan=3><table border=1 width=100% cellspacing=0 cellpadding=0 bgcolor=#1066FF><tr><td width=48%><p align=center>[color=#FFF9ED][size=20][b]NolF[/b][/size][/color]</td><td width=4%><table border=3 width=100% bgcolor=#E7F9FB><tr><td width=100%><img border=0 src=http://www.elrincondelmanga.com/dracco_ftp/fotos_internet/estrellas/mascotas/sonido.jpg width=35 height=35></td></tr></table></td><td width=48%><p align=center></td></tr></table></td></tr><tr><td width=33% align=center valign=middle><img border=0 src=http://img474.imageshack.us/img474/7596/images2yx.jpg width=30 height=27></td><td width=33% align=center>Subiendo</td><td width=34% align=center><img border=0 src=http://img474.imageshack.us/img474/3707/21ln.jpg width=30 height=27></td></tr><tr><td width=33%><table width=90% align=center><tr><td><font color=#9f1f1f>	   
  - (S) Death note (emitiendo) + peli 	   
  - (S) Evangelion Subtitulado (AnS) + Peliculas 	   
  - (S) Full Metal Panic: The second Raid 	   
  - (S) GTO Live (12/[1]/12) + pelis 	   
  - (S) Hajime no Ippo 	   
  - (S) Hikaru no Go (a medias xD) 	   
  - (S) Kimi ga nozomu eien 	   
  - (S) Sadamitsu el destructor 	   
  - (S) Speed Grapher 	   
  - (S) The law of ueki AnP 	   
  - (S) Ulises 31 	   
  - (O) Video Girl Ai<P>	   
</td></tr></table></font></td>	   
<td width=33%><table width=90% align=center><tr><td><font color=#108000>	   
  - (S) Getbackers (49) [postear/plantilla] 	   
  - (S) Hikaru no go [postear/plantilla] <P>	   
</td></tr></table></font></td>	   
<td width=33%><table width=90% align=center><tr><td><font color=#1000ff>	   
  - (S) Grenadier (13) 	   
  - (S) Lamune ~Glass Bin ni Utsuru Umi (13) 	   
  - (O) Ogre Slayer (4) (reconsiderando) 	   
  - (S) OutlawStar (26) [Dual] <P>	   
</td></tr></table></font></td>	   
</tr></table>	 

After editing

[CENTER][COLOR=#fff9ed][SIZE=20][B]NolF[/B][/SIZE][/COLOR][/CENTER]
[IMG]http://www.elrincondelmanga.com/dracco_ftp/fotos_internet/estrellas/mascotas/sonido.jpg[/IMG][CENTER][/CENTER]
[IMG]http://img474.imageshack.us/img474/7596/images2yx.jpg[/IMG]Subiendo[IMG]http://img474.imageshack.us/img474/3707/21ln.jpg[/IMG][COLOR=#9f1f1f]       
  - (S) Death note (emitiendo) + peli        
  - (S) Evangelion Subtitulado (AnS) + Peliculas        
  - (S) Full Metal Panic: The second Raid        
  - (S) GTO Live (12/[1]/12) + pelis        
  - (S) Hajime no Ippo        
  - (S) Hikaru no Go (a medias xD)        
  - (S) Kimi ga nozomu eien        
  - (S) Sadamitsu el destructor        
  - (S) Speed Grapher        
  - (S) The law of ueki AnP        
  - (S) Ulises 31        
  - (O) Video Girl Ai[/COLOR][COLOR=#9f1f1f]       
[/COLOR]
       [COLOR=#108000]       
  - (S) Getbackers (49) [postear/plantilla]        
  - (S) Hikaru no go [postear/plantilla] [/COLOR][COLOR=#108000]       
[/COLOR]
       [COLOR=#1000ff]       
  - (S) Grenadier (13)        
  - (S) Lamune ~Glass Bin ni Utsuru Umi (13)        
  - (O) Ogre Slayer (4) (reconsiderando)        
  - (S) OutlawStar (26) [Dual] [/COLOR][COLOR=#1000ff]       
[/COLOR]

I hope the problem is explained propely, I desperetly need a fix... I don't want it to go to deaf ears, it is just too good to leave this small detail left out

Thanks to kall for the hack and Kirby for the hints

[mihai11]

Originally Posted by NolF

Tested on 3.6.4 and it works

I hope the problem is explained propely, I desperetly need a fix... I don't want it to go to deaf ears, it is just too good to leave this small detail left out

Thanks to kall for the hack and Kirby for the hints

Only use the basic editor if you want to keep the original HTML.

[NolF]

Originally Posted by mihai11

Only use the basic editor if you want to keep the original HTML.

Just tried that, same error happens. Initially the table shows up (fancy looking), but when I press the 'switch editor mode' then All tables are gone. If the button es pressed again, the fancy looking table, has just lots all the structure and is not fancy anymore...
Thanks for trying anyways, it's greatly appreciated.

Any other ideas?

[mihai11]

Originally Posted by NolF

Just tried that, same error happens. Initially the table shows up (fancy looking), but when I press the 'switch editor mode' then All tables are gone. If the button es pressed again, the fancy looking table, has just lots all the structure and is not fancy anymore...
Thanks for trying anyways, it's greatly appreciated.

Any other ideas?

You must go to your "User Control Panel" and select the basic editor as the default editor. Whenever you use the "switch editor mode" option you loose the formatting, so you must make the basic editor the default in order to avoid using that option.

Hope this helps.

[NolF]

I can't find the option you are mentioning Ended up empty handed after looking thoroughly on both UCP and ACP.

Besides, its a bit extrange that in order to be able to edit tables I can only use simple view. If by default when I press edit, it inmediatly shows me de code (including tables) then It's what I'm looking for, else don't know what to do.

Just one aclaration, is it vbulletins fault or is it due to this hack that the tables get lost after pressing "switch editor mode"? (I doubt is due to this hack but still it is a valid question, I think.)

Thanks for helping mihai11

[mihai11]

Originally Posted by NolF

I can't find the option you are mentioning Ended up empty handed after looking thoroughly on both UCP and ACP.

Go to "User Control Panel -> Edit Option -> Message Editor Interface". You can choose Basic & Standard: both options are OK.

I attached a print screen with the option.

Originally Posted by NolF

Besides, its a bit extrange that in order to be able to edit tables I can only use simple view. If by default when I press edit, it inmediatly shows me de code (including tables) then It's what I'm looking for, else don't know what to do.

This is how things get done in VB. The built-in WYSIWYG editor doesn't support HTML properly.

Originally Posted by NolF

Just one aclaration, is it vbulletins fault or is it due to this hack that the tables get lost after pressing "switch editor mode"? (I doubt is due to this hack but still it is a valid question, I think.)

Thanks for helping mihai11

It's the default VB behavior. It has nothing to do with this hack. It's easy to convince yourself - just try this on a clean VB installation

[NolF]

Thx mihai your solution worked perfectly

[TheWebCo]

Hi Guys

I downloaded and installed this and have changed the permissions for the Administrator only so that I could create an HTML table in a post reply.

Sadly, I just seem to get in the preview:-

HTML code:

and then all the HTML code, it doesn't seem to be parsed.

I thought that may be peculiar to the preview so I tried submitting it as a reply but I get the same result.

Any ideas, as it seems to be foxing me at the moment!

Cheers

Nick

[TheWebCo]

I found the answer - I didn't realise that not only did I need to set the permission for the usergroup, but also the forum permissions to allow HTML
within it.

One other thing I didn't realsie was that the HTML could be cut and pasted straight into thw WYSIWYG editor and doesn't have to be inserted as raw HTML code.

[mihai11]

Originally Posted by TheWebCo

One other thing I didn't realsie was that the HTML could be cut and pasted straight into thw WYSIWYG editor and doesn't have to be inserted as raw HTML code.

Some things will break if you do that. For example all "targets" for the anchor tag

<a>

will be lost. The WYSIWYG editor saves the post as BB code. In BB code it is not possible to specify the target of a link.

[NolF]

Just a warning if you isntall this in 3.6.4 After puting ,my board live, usergroups who didnt have html allow would stop the post for being parsed just by opening it... so it doesnt work on 3.6.4

[Xil Ze]

Originally Posted by NolF

Just a warning if you isntall this in 3.6.4 After puting ,my board live, usergroups who didnt have html allow would stop the post for being parsed just by opening it... so it doesnt work on 3.6.4

what do you mean exactly?

[ThomasR]

Yes, I'm using this plugin, but still under 3.6.1 (patched) and I need this plugin before moving to 3.6.4