Administrative and Maintenance Tools - PHPKD - vB Link Verifier Bot 'Lite' 2nd Generation

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!.................. Brought to you by PHP KingDom (www.phpkd.net) ..................!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PHPKD - vB Link Verifier Bot 'Lite' 2nd Generation
(Inspired by the 'Ultimate' edition)

Please remember to click Mark as Installed if you use this product.
Support requests from members who have not marked this as installed will be considered low priority.


Name: PHPKD - vB Link Verifier Bot 'Lite'
Version: 4.2.110

Description: This product extract sharing links of hundreds of sharing hosts, and verifies them; If they're "Alive" the post will pass, otherwise it will be punished.


Compatible with: All 4.0.x/4.1.x/4.2.x vBulletin versions.


Requirements:

• vBulletin version 4.0.x/4.1.x/4.2.x

License:

• http://info.phpkd.net/en/license/free/

Helpful links:

• Bug Reports
• Feature Requests

Features:

• General Features:-
  
  • 100% OOP.
    
  • MD5 checked.
    
  • Fully Phrased.
    
  • Fully Supported.
    
  • Fully Automated.
    
  • Accurate Processing.
    
  • Professionally Coded.
    
  • Detailed Documentation.
    
  • Doesn't require any manual edits.
    
  • Supports hundreds of sharing hosts by default.
    
  • Depends on & uses default vBulletin techniques with full compatibility.
    
  • Board Load Zero Queries, queries executed only when the scheduled task run.
    
  • The cronjob (scheduled Task) logs every run details in "Scheduled Task Log", so you can review it later within the log viewer. (Ultimate Edition Only)
    
  • The product's code base is very solid, and is very rich as well with a 'plug-and-play' architecture for easier expansion & for much more flexibility.
    
  • Auto generate pretty nice reports for instant/later review, these reports can be displayed in real time while running the scheduled task, sent as a private/email message, post as a thread/reply.
    
  
  
• Specific Features:-
  
  • AdminCP Options:
    
    • Administrator Permissions:
      
      • Can Administer "PHPKD - vB Link Verifier Bot"
        
    • General Settings:
      
      • Product Active
        Choose whether the product "PHPKD - Link Verifier Bot" is active or not (Global On/Off Switch).
        
        
      • Include/Exclude Users (Ultimate Edition Only)
        You can specify certain users to check their posts against dead links, or to exclude others' posts from being checked at all.
        
        Select "Include All Users" to check all users' posts, or select "Include Specific Users" to check only those specific users' posts -defined in the following setting-, or select "Exclude Specific Users" to check all users' posts except those specific users' posts -defined in the following setting-.
        
        
      • Included/Excluded Users (Ultimate Edition Only)
        If you have chosen "Include Specific Users" OR "Exclude Specific Users" from the above setting, then you have to enter those specified user IDs here in this setting's field. Separate user IDs by normal English comma.
        
        
      • Include/Exclude Usergroups (Ultimate Edition Only)
        You can specify certain usergroups to check their posts against dead links, or to exclude others' posts from being checked at all.
        
        Select "Include All Usergroups" to check all usergroups' posts, or select "Include Specific Usergroups" to check only those specific usergroups' posts -defined in the following setting-, or select "Exclude Specific Usergroups" to check all usergroups' posts except those specific usergroups' posts -defined in the following setting-.
        
        
      • Included/Excluded Usergroups (Ultimate Edition Only)
        If you have chosen "Include Specific Usergroups" OR "Exclude Specific Usergroups" from the above setting, then you have to choose those specified usergroups from the list displayed. Note that you can select multiple options by holding "CTRL" key while selecting.
        
        
      • Include/Exclude Forums
        You can specify certain forums to check their posts against dead links, or to exclude others' posts from being checked at all.
        
        Select "Include All Forums" to check all forums' posts, or select "Include Specific Forums" to check only those specific forums' posts -defined in the following setting-, or select "Exclude Specific Forums" to check all forums' posts except those specific forums' posts -defined in the following setting-.
        
        
      • Included/Excluded Forums
        If you have chosen "Include Specific Forums" OR "Exclude Specific Forums" from the above setting, then you have to choose those specified forums from the list displayed. Note that you can select multiple options by holding "CTRL" key while selecting.
        
        
      • Time/Date Cutoff Mode
        You can force this product to process only posts in a specific time frame.
        You've two modes to choose from:
        
        • Last X Days: This mode will check all posts posted only in the last X days.
          
        • Before Specific Date: This mode will check all posts posted before that specific date.
          
        • After Specific Date: This mode will check all posts posted after that specific date.
          
        • Between Two Specific Dates: This mode will check all posts posted between those two specific dates.
          
        After choosing your preferred mode, you have to enter the appropriate value in the following setting according to the declaration defined down there.
        If you do not want to use the Cutoff feature at all then enter "0" in the following setting's field "Time/Date Cutoff Value".
        
        
      • Time/Date Cutoff Value
        To force this product to process only posts in a specific time frame, choose your preferred mode in the above setting, then enter the appropriate value here in this setting's field according to the following definition:
        
        • Last X Days: Enter a correct positive integer value for that period in days to check posts posted within last X days.
          
        • Before Specific Date: Enter a correct date in the format (yyyy-mm-dd) to check posts posted before it.
          
        • After Specific Date: Enter a correct date in the format (yyyy-mm-dd) to check posts posted after it.
          
        • Between Two Specific Dates: Enter two correct dates in the format (yyyy-mm-dd|yyyy-mm-dd) -note the separator symbol '|' (without quotes)- to check posts posted between them. Make sure to set the older date first then the newer.
          
        To turn off the "Time/Date Cutoff Mode" feature totally, enter "0" in this setting's field.
        
        
      • Checked Protocols (Ultimate Edition Only)
        Which internet protocols should be checked?
        
        • HTTP
          
        • HTTPS
          
        • FTP
          
        
        
      • Checked BBCodes (Ultimate Edition Only)
        Select which BBCodes should be scanned. Note that URL tags are checked by default.
        
        • Basic BB Code
          
        • Color BB Code
          
        • Size BB Code
          
        • Font BB Code
          
        • Alignment BB Code
          
        • List BB Code
          
        • Link BB Code
          
        • Code BB Code
          
        • PHP BB Code
          
        • HTML BB Code
          
        • QUOTE BB Code
          
        • HIDE BB Code
          
        • CHARGE BB Code
          
          
        'Lite' edition scans & check all default vBulletin BBCode Tags without the ability to select which should & which shouldn't be checked.
        
        
      • Excluded Thread Modes (Ultimate Edition Only)
        Specific thread modes can be excluded from being checked. By default all threads are checked regardless of it is mode. To exclude certain thread mode, choose it from the list.
        
        • Opened
          
        • Closed
          
        • Moderated
          
        • Sticky
          
        • Deleted
          
        • Redirected
          
        
        
      • Excluded Post Modes (Ultimate Edition Only)
        Specific post modes can be excluded from being checked. By default all posts are checked regardless of it is mode. To exclude certain post mode, choose it from the list.
        
        • Opened
          
        • Moderated
          
        • Deleted
          
        
        
      • Check Existing Posts
        Should existing posts be checked? If yes, then which of it should be? Only thread's head (first post), or all posts within?
        Turning this option 'OFF' means that the scheduled task (cronjob) will be completely useless, it will not do any work at all. Only new & edited posts will be checked if activated in the following settings.
        Options: [None | All Posts | Thread's First Post]
        
        
      • Check New Posts (Ultimate Edition Only)
        Should new posts be checked live (on real time)? If yes, then which of it should be? Only thread's head (first post), or all replies as well?
        Turning this option 'OFF' means that the scheduled task (cronjob) will be completely useless, it will not do any work at all. Only new & edited posts will be checked if activated in the following settings.
        Options: [None | All Posts | Thread's First Post]
        
        
      • Check Edited Posts (Ultimate Edition Only)
        Should edited posts be checked live (on real time)? If yes, then which of it should be? Only thread's head (first post), or all replies as well?
        Turning this option 'ON' may cause users with low/limited internet connections to have some issues and may not be able to post, specially if their post contains many links to be checked.
        Options: [None | All Posts | Thread's First Post]
        
        
      • Maximum Checked Links Per Post
        How many links should be checked per post? If any post contains more than that defined limit, then those 'over limit' links will be ignored & will not be checked; only the first X links (as defined here) will be checked. Enter "0" for UNLIMITED.
        
        
      • Critical Limit/Red Line
        Posts can be punished because of high percentage of dead links within. Define the "Critical Limit/Red Line" percentage here as a positive integer value (without any symbols). This "Critical Limit/Red Line" is the percentage that if dead links reaches or exceeded within a post, then that post will be punished.
        Notes & Examples:
        
        • "10" means if dead links within a post reaches or exceeded 10% of all included links it will be punished. If a post has less than 10% of dead links, then it will pass as valid without punishment.
          
        • "0" means that all links per post should be valid & alive (no dead links allowed, if just one link is dead the post will be punished); While "100" means the opposite, it means that all links within a post should be dead to be punished, that means if there is only one link alive & the rest are dead, the post will pass as valid without punishment.
          
        • If any post has only 5 links within it to be checked, that means each link represents 20% from all checked links. It means also if only one link is dead & you have set this setting to '10%' the expression will evaluate as true & will punish that post since it has 20% of dead links.
          
        
        
      • Check Succession Period
        Successive checks for same posts can be separated by a certain period of time, so those 'checked recently' posts did not checked every time the script runs. Same posts can be checked multiple times, but with at least 1 day between each two successive checks. Define how many days should separate each two successive checks for the same post, or enter "0" to check posts ONLY ONCE. Note: "14" means your checked posts will be checked again every fourteen days (two weeks). "0" or a high Value usually recommended specially for large boards.
        
        
      • Checked Posts Per Batch
        It is recommended to define a specific low number of posts to process in each run to prevent any possible timeout or Memory/CPU exhausting during the execution process. A Lower Value usually recommended specially for boards that has long posts with many links. There is other important factors that have strong affect as well such as: "Time/Date Cutoff Mode", "Time/Date Cutoff Value", "Check existing posts", "Maximum Checked Links Per Post", "Check Succession Period"; So please take care & try to set a logical acceptable value for each of these settings to avoid any expected/unexpected issues. You are the best one who knows your board & you are the one who can determine which suits you & your board according to your board's activity/content/requirements.
        
        
      • Remote Functions Maximum Redirections
        The maximum amount of HTTP redirections to follow.
        
        
      • Remote Functions Execution Timeout
        The maximum number of seconds to allow remote functions to execute.
        
        
      • Remote Functions Maximum Response Size
        The maximum allowed size of response to accept, enter value in bytes.
        
        
      • Required Sharing Links (Ultimate Edition Only)
        You may force users to post 'supported' sharing links within their posts in order to submit their posts, otherwise they will get an error message.
        You can select which forums would you like to force users include 'supported' sharing links within their posts.
        
      
      
      
    • Reporting Settings:
      
      • Reports Staff Handler
        Reports posted in forums or sent as PMs to both staff and normal users requires a valid staff member username to use as a poster & sender for these reports. Enter a valid staff member username with appropriate privileges here in this setting's field. Note: If this username is invalid or does not has appropriate privileges, then all "PM/Reply/Thread Reports" will not work until it is corrected, however "Email Reports" does not affected by this option and will keep working regardless of this option's value.
        
        
      • Staff Reports
        After each run of the script, it is possible to auto generate final reports for staff using any of the following methods: (PM, Email, New Reply, New Thread). Select your preferred methods.
        
        • Send Private Message
          
        • Send Email Message (Ultimate Edition Only)
          
        • Post New Thread
          
        • Post New Reply (Ultimate Edition Only)
          
        
        
      • Sending Staff Reports
        In case you want to send reports to staff via PM or Email, you have the ability to choose which staff should receive those reports.
        
        • Send Reports To Moderators Only
          
        • Send Reports To Moderators & Administrators
          
        
        
      • Staff Reports Mode
        Staff reports can be sent in certain conditions, which conditions should staff reports sent in?
        Select the appropriate option:
        
        • Always send: always send regardless there is checked/dead/punished posts or not.
          
        • Send Only If There is Checked Posts: send only if there is checked posts, regardless there is dead/punished posts or not.
          
        • Send Only If There is Dead Posts: send only if there is checked posts with dead links regardless it exceeds the critical limit or not -punished or not-.
          
        • Send Only If There is Punished Posts: send only if there is checked posts with dead links that exceeds the critical limit, and thus punished.
          
        Note: Punished posts implicitly included within dead posts.
        
        
      • User Reports
        After each run of the script, if there is punished posts: it is possible to auto generate simple reports to their owners using any of the following methods: (PM, Email) telling them that some of their posts contains some dead links. Select your preferred methods.
        
        • Send Private Message
          
        • Send Email Message (Ultimate Edition Only)
          
        
        
      • User Reports Mode
        User reports can be sent in certain conditions, which conditions should user reports sent in?
        Select the appropriate option:
        
        • Send Only If There is Dead Posts: send only if there is checked posts with dead links regardless it exceeds the critical limit or not -punished or not-.
          
        • Send Only If There is Punished Posts: send only if there is checked posts with dead links that exceeds the critical limit, and thus punished.
          
        Note: Punished posts implicitly included within dead posts.
        
        
      • Reports: Included Posts (Ultimate Edition Only)
        Which posts to include in the generated reports?
        Select the appropriate option:
        
        • Checked Posts Only: include checked Posts, ignore punished posts.
          
        • Punished Posts Only: include punished Posts, ignore checked posts.
          
        • Checked Posts & Punished Posts: include both checked Posts and punished posts as well.
          
        'Lite' edition uses Checked Posts & Punished Posts by default & without available choices.
        
        
      • Reports: Included Links (Ultimate Edition Only)
        
        • All Links
          
        • Alive Links
          
        • Dead Links
          
        • Down Links
          
        • None
          
        'Lite' edition uses All Links by default & without available choices.
        
        
      • Staff Report Forum
        If "Post New Thread" staff report method is enabled, then a forum should be selected to post those threads in.
        
        
      • Staff Report Thread (Ultimate Edition Only)
        If "Post New Reply" staff report method is enabled, then a thread should be selected to post those replies in. Valid thread ID is required.
        
        
      • Reports Phrases
        Modify and localize reports' subject & message as preferred.
        

Rest features & screenshots in the next posts ..!!

[Omranic]

Originally Posted by webrats

ya another paid product trying to pass itself off as free

Not true, it's originally posted as a free product on another old thread & then the ultimate edition has been developed & the thread reflected both life & ultimate editions features for all interests.
Also this lite product is fully functional in it's own & can be extended with PHP & REGEX knowledge to reach some level similar to ultimate edition. If you need a simple link checker/verifier then use the lite edition, otherwise if you need it for heavy work & with premium support & extra extensibility then go for the ultimate.
Finally, this kind of products that provides lite & ultimate editions doesn't break any policies of vBulletin echosystem.

At the end thank you for your opinion. I hope you can find any of my products helpful for your communities e en now or I the future.

[Omranic]

Originally Posted by webrats

you should update your description you DO NOT support
Hotfile, Mediafire, Rapidshare, 4shared, Depositfiles, Filefactory,
with the version you posted here

Thank you for your notice.
I forgot to do do, I'll do so soon once returned back to my office within a week or so.

[Omranic]

The 'Ultimate' edition became Opensource!!
PHPKD - vB Link Verifier Bot 'Ultimate' https://vborg.vbsupport.ru/showthread.php?t=232348
Feature list & change log is very long, so please visit product's page for the full list.
Get all the premium features for free, and upgrade now...