The Arcive of Official vBulletin Modifications Site.

Additional Navbar · **Released**: 05-15-2004

Dispite what category this is in it works with vBulletin 3.5. Just read the directions.

What this does is create another navbar with drop down menu?s by typing $navbar2 in any of your templates. It is just like the one that comes with vBulletin 3.

After seeing a lot of replies about users wanting another navbar besides the basic one that comes with vBulletin. I waited for someone else to write one. But no one stepped forward and wrote one. I wanted this for my site and got tired of waiting for someone else to write it. So I played around and created this one for myself. I though I would share it with everyone.

Note: If you do not want to add a separate navbar template you can also substitute the steps in 5A through 5D and insert the navbar2.txt after you have edited it the way you want and into the same places as I mentioned for the $navbar2 in your default navbar and you will not have to do any of these other steps.

I put a lot of description tags in the HTML file to help explain what everything does. Once you understand what is going on here you can removed these. With very little modifications you can add to, remove or move items around in this navbar.

1. To install this hack you will have to create a template in you ADMINCP and call it ?navbar2? and insert the contents of the attached file "navbar2.txt" into this template file. Right now it is set up for my site. So you will have to modify it to what you want in this navbar for your site.

2. Put the following command in your phpinclude_start template:

PHP Code:


			
eval('$navbar2 = "' . fetch_template('navbar2') . '";');

2A. This is for users that have vB 3.5 and up. Step 2 will not work because the phpinclude_start template no longer exist in versions 3.5 and higher. So for 3.5 users ignore step 2 and use 2A.

Plugin System
Add new Plugin

Hook Location: global_start
Title: navbar2
Plugin PHP Code:

PHP Code:


			
eval('$navbar2 = "' . fetch_template('navbar2') . '";');

3. Now put the following command in you header or what ever template where your want the new navbar to be displayed (samples of where to put them are in the attached photos and directions are in 5A, B, C, D.):

PHP Code:


			
$navbar2

4. Since the template is uncached you will have an extra query on each page. To fix, open global.php
Find:

PHP Code:


			
// misc useful

Add below:

PHP Code:


			
'navbar2',

5A. Under current Navigation / Breadcrumb Templaters - navbar:
Find:

Code:

<!-- / nav buttons bar -->

Below that place:

Code:

$navbar2

5B. On top of forums tables:
Find:

Code:

<!-- / PAGENAV POPUP -->
</if>

Below that place:

Code:

$navbar2

5C. Under your header:
Find:

Code:

<br />
<!-- breadcrumb, login, pm info -->

Above that add:

Code:

$navbar2

5D. Top of current navbar:
Find:

Code:

<!-- breadcrumb, login, pm info -->

Under that add:

Code:

$navbar2

vBadvance CMPS using vB 3.5 or higher. To get this working with the homepage you will have to do the following.

Go into your ADMINCP-->vBa CPMS-->Default Setting-->Portal Output Global Variables and add navbar2 in the block there and save it.

Arcaded hack. You will need to go into your darcaded hack and edit a line. Here are the directions:
Go to you arcade/functions/functions.php
open it with a text editor:
Find:

Code:

global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;
global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits;

Replace with:

Code:

global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;
global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits, $navbar2;

JMH11788 · #**152** 09-03-2005, 04:59 AM

Here is a fix for people that want a navbar ontop.

You will have the problem like in post #33

i had the problem. it had no border ontop and a thick one on bottom.

i spent a couple hours trying to figure the stupid thing out.

its really easy and i dont know why it took me so long to figure out.

anyways,

in navbar2 template find:

PHP Code:


			
<!-- nav buttons bar -->

<div align="center">

    <table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="0" border="0" width="100%" align="center" style="border-top-width:0px">

and replace with:

PHP Code:


			
<!-- nav buttons bar -->

<div align="center">

    <table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="0" border="0" width="100%" align="center" style="border-bottom-width:0px">

easy as that. not sure why no one else posted the solution

sbrad · #**153** 09-07-2005, 03:59 AM

This thing turned out beautifully. Thanks!
http://forums.officerresource.com

mustang_lex · #**154** 09-07-2005, 03:34 PM

I love it. However why doesn't the Navbar2 showup when I go into my arcade?

its arcade.php BTW

attroll · #**155** 09-07-2005, 03:54 PM

Quote:

Originally Posted by mustang_lex

I love it. However why doesn't the Navbar2 showup when I go into my arcade?

its arcade.php BTW

It has something to do with your arcade hack. You most likely need to add "$navbar2" to your globals in your arcade index or main arcade php file.

mustang_lex · #**156** 09-07-2005, 04:28 PM

Ya its iproarcade . you can see it when you go to my site. I opened the arcade.php file and it just says load ./global.php ???

attroll · #**157** 09-09-2005, 06:42 AM

Quote:

Originally Posted by mustang_lex

Ya its iproarcade . you can see it when you go to my site. I opened the arcade.php file and it just says load ./global.php ???

I am looking at you arcade right now.

Try this in your arcade functions. But first before you make any modifications remember to make a backup.

Go to you arcade/functions/functions.php

open it with a text editor:

Find:

PHP Code:


			
     global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;
global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits;

Replace with:

PHP Code:


			
     global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;
global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits, $navbar2;

If this does not work then delte the file and put your backup back in.

mustang_lex · #**158** 09-09-2005, 12:35 PM

Quote:

Originally Posted by attroll

I am looking at you arcade right now.

Try this in your arcade functions. But first before you make any modifications remember to make a backup.

Go to you arcade/functions/functions.php

open it with a text editor:

Find:

PHP Code:


			
     global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;

global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits;

Replace with:

PHP Code:


			
     global $header, $vbphrase, $vboptions, $stylevar, $headinclude, $bbuserinfo, $session, $show, $pmbox;

global $forumjump, $timezone, $logincode, $_USEROPTIONS, $scriptpath, $admincpdir, $modcpdir, $quickchooserbits, $navbar2;

If this does not work then delte the file and put your backup back in.

How can I say this......

THANK YOU! it worked like a charm. I never even thought of looking there. You truly are a genieus!!!!

ReZ · #**159** 09-09-2005, 02:22 PM

Does this work with version 3.0.7?

mustang_lex · #**160** 09-09-2005, 03:16 PM

Yes it does. I have 3.0.7. they should update that

ReZ · #**161** 09-09-2005, 05:53 PM

Ok thanks ^

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.05063 seconds Memory Usage 2,349KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (10)bbcode_code (11)bbcode_php (3)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (1)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!