Geek Article System 3.52

IMPORTANT:
Please note that I can no longer support this project. Primarily as it is designed for vb3.0.x and I no longer use that version (im obviously on vb3.5x ). There is a version for vb3.5 however its a commercial script. This project is left here for the community.
-----------------------
HowdA All.

The GAS3 system is a comprehensive article system that completely integrates into vB3.

News:

• Updated 3/08/05 to version 3.53 for compatability with vb3.08
• Updated 13/05/05 to version 3.52!!! Posts for 3.52 to integrate with GAL4.0 start here

History

Originally, I looked into other article systems to integrate with my forums but just got irritated over and over again as I found the other offering out there very limiting for my needs. I wanted to use my members usergroup permissions, the search facility (so when someone did a search for 'bob' both articles AND threads appeared on one page), I also wanted wysiwyg editing and vBs attachment system. Well, I accomplished 99% of my needs with the Geek Article System 2.0
Why 3.0? While the 2.0 was fine for my needs, many users began asking for a far more complex system that took the beauty of 2.0 and added popular features in the other article systems.

Here are the features in a nutshell:

• Integrates 100% into vB. No importing forums or creating special groups. Simply mark forum as an 'Article' forum and instantly all threads become articles. Dont like it anymore? Simply remove the ID and the therads and forums go back to normal.
• Whatever you can do in a thread or post, you can do with the GAS3 system (uploading attachments, smiles, BBcode, various editors, yadayadayada)
• Adding on the above point: all the differing vB editors (wysiwyg, etc..), usergroup permissions (heck - anything you can set for a forum you can set in this - AND MORE!) why> because it is totally integrated!
• Create multiple pages in your post by simply putting [BREAK] anywhere in your post.
• The first thumbnail in an article substitutes the posters avatar (switchable via admincp)
• Upload header images and have them auto resize
• Choose header images from a global (or forum specific) gallery
• Integrated article byline.
• Synopsis - allows users to give a summary that appears on the new forumdisplay
• New forumdisplay shows article header image and synopsis (if no synopsis then the first X amount of characters from the article is used)
• Synopisis allows BBCode
• Integrates with the Geek AutoLink system (optional)
• Allows you to post as other users
• Article sidebar that shows the article rating, your rating, the rating form, article tools, and article attachments (all toggable via admincp)
• An auto installer/upgrader/uninstaller that makes all file edits for you!
• A whole host of other tiddlybits that I wont bore you with

Special thanks goes to rlamego, peterska2, Snow, Gldtn, and Magic Spark for private Beta testing this for me. Couldnt of happened without them!

Change log
13.05.05 - updated to 3.52
All this does is update GAS for the GAL4.0 integration.
To update, simply replace your existing functions_geekarticles.php with the one in the latest package.

18.3.05 - updated to 3.51
This really just fixes a couple of mega minor bugs.
Added new default icon per forum functionality (see readme)
Wrote a real README.
Wrote a seperate 3.5x upgrade script. Users of 3.5x should run admincp/gas3_upgrade.php

16.3.05 - updated to 3.50
Loads of new features and a new installer that makes the file changes for you.
New forumdisplay
Uploading of images for your header
Synopsis box
yadayadayda

10.2.05 - updated to 3.02
Fixed typo in readme (step 2.6 referenced $articlebyline instead of $GAS_byline). This bug fixes the disappearing byline when editing an article.
To upgrade - edit your editpost template and search for $articlebyline then replace it with $GAS_byline

Importers
I have made an importer for v3articles. Technically speaking, you dont have to strictly have GAS3 installed to use the importer (though it is ideal). What it does is essentailly import v3articles, comments, ratings, and attachments into existing forums as new threads, replies, threadratings, and post attachments. The idea is that you install GAS3, create the forums to house your articles, and then import your existing v3articles into them (but as I said, you can simply import v3articles into normal forums without having GAS3 installed).
There is also a rollback feature in case you change your mind or experience a problem with the import. Your v3articles installation isnt touched. In fact, no v3articles are harmed in the process

Known issues:

• none that I am aware of.

Demos: (note that I have a custom skin, so your results will be ever so slightly different)
http://www.thenailgeek.com/showthread.php?t=11287
http://www.thenailgeek.com/showthread.php?t=8801 - pages with comments (click View Comments to see comments only)


Difficulty - EASY
Time - about 5 minutes
File modifications? a few but now all done automatically for you

Change log:

Updated to 3.01 Feb 7th
Fixed a couple template errors and minor readme instructions


Instructions

Click install. I have busted my butt over the past few weeks to do this and all I ask is that you click install if you use it

• Download the package and unzip.
• Follow the README!
• Ther installer does all the work for you
• When done, go into your admncp, and adjust your settings

Troubleshooting:

• No phrases after install? This happens a lot with many installers for some bizzare reason. All you have to do is do a phrase search for GAS_ , edit the phrase (dont change it), then save it. Bingo - all your phrases appear.

Also:

I would therefore backup your DB, your styles, and any of the files the README asks you to change.

nJoy

[hotwheels]

I am currently running vb3.07....I do not plan on upgrading to 3.5 or any other vb at this time, of the 2 zip files attatched to this thread, do i need to down load both and then install both to my site or just one of them?

GAS3fromV3.zip or
GAS3.53.zip

Just trying to make sure i install the add on correctly. Thank you very much for your time.

Hotwheels

[The Geek]

You just need the GAS3.52.zip (the oither is an importer for another article hack).

Sleazy, you have most likely over written your modified files so you will need to re modify them (re-run the file modification steps)

claim - the forum folder name wont make a difference as it works from your forum directory. Very rarely, the folder structure has to be made manually wich is a snap... just follow the directions in the readme to do this.

Music man, are you sure that the gas/changes folder is chmod to 0777? Thats a typical error for that happening. If it is, try creating the folder structure manually (as per readme) and rerun the file mod portion of the installer

Worse case scenario for you guys - you will have to manually modify your files like all other hacks out there

Clayton - there are no plans to continue work on this version. I am in the process of beta testing a commercial version for vb3.5 and up.

HTH's

[hotwheels]

Thank's for the quick response.........i click's install

[tuanluu]

just installed

[italks]

I am currently using vBulletin 3.0.6 and i tried installing GAS but i got following errors :

Can not complete change to printthread.php - step 705 as I can not find the text to replace. You will have to manually complete this step.
Looks like there were some errors reverting the files. manual changes (link will open in new window) before continuing.

Please help me on this.

step 705
--------------------------------------------------------------------------------

in printthread.php, replace:

--------------------------------------------------------------------------------

eval('$postbits .= "' . fetch_template($maintemplatename) . '";');
--------------------------------------------------------------------------------

with:

--------------------------------------------------------------------------------

// === GAS step 705 ===
$maintemplate = $template;
eval('$postbits .= "' . fetch_template($maintemplatename) . '";');

All i can find in printthread.php is following should i change that.

eval('$postbits .= "' . fetch_template('printthreadbit') . '";');

[The Geek]

Originally Posted by italks

I am currently using vBulletin 3.0.6 and i tried installing GAS but i got following errors :



Please help me on this.


All i can find in printthread.php is following should i change that.

eval('$postbits .= "' . fetch_template('printthreadbit') . '";');

Thats because that line changed in 3.0.8

Not 100% sure how to advise you as I dont have the old printthread anymore.

Try replacing:
eval('$postbits .= "' . fetch_template('printthreadbit') . '";');

with:

if ($template)
{
$maintemplate = $template;
}
else
{
$maintemplate = 'printthreadbit';
}
eval('$postbits .= "' . fetch_template($maintemplatename) . '";');

Hope that helps!

[italks]

well i replaced that thing before and it works well.Actually i was looking for something different article system.Anyways you got good article system too thanks.Also thanks for quick reply and help.

[sbrad]

I'm having the damndest problem and I can't for the life of me figure out why.
I'm running the latest version on VB 3.08. For some reason, the page breaks completely stopped working. I'm thinking it MUST be something I installed. It's all I can figure, but I don't know what it would be. All I get now is the word BREAK on a page, surrounded by the brackets. Any ideas would be appreciated!

[PixelFx]

Originally Posted by sbrad

I'm having the damndest problem and I can't for the life of me figure out why.
I'm running the latest version on VB 3.08. For some reason, the page breaks completely stopped working. I'm thinking it MUST be something I installed. It's all I can figure, but I don't know what it would be. All I get now is the word BREAK on a page, surrounded by the brackets. Any ideas would be appreciated!

found bug, when you post [Break] in bold it leaves on the first page and on the second page otherwise the system is running very nice.

I have it running on v3.0.9 the auto install worked perfectly

Demo: http://www.orbsydia.com/forum/forumdisplay.php?f=143

[sbrad]

Gah!
Nevermind. I figured it out.
I guess I had somehow replaced the showthread.php.