vB Mail Reply

vB Email Reply 0.7BETA


What it does:
This allows your members (and you of course) to reply to threads by email. All they have to do is wirte to a specific email address (that you specify) and include a special code in the email subject.

How it works:
A script (vbemailreply.php) is run using the vB3 Cronsystem every minute. This checks a pop3 or imap account for emails and then processes these emails, inserting the data into the database. Then a reply is sent to the sender, stating that either the post/thread got entered correctly or that there was some kind of error.

Is it complicated?
Actually no. There is an install script that does most of the work as well as two small file changes. If you do have problems installing it, contact me for help.

Changes:
New files (2):
/includes/cron/vbmailreply.php
/includes/mimeDecode.php

Changed files(1):
/includes/functions_newpost.php

New database fields/tables(1):
New userfield added by installscript

New templates(0):

Changed templates(0):

New phrases(3):
emailreplyerror
emailreplydone
emailnewthreaddone

Changed phrases(1):
notify

Screenshots:
none

Credits:
The idea and small parts of the script are based on Chen 'FireFly' Avinadav's Email posts into forum hack, found here: https://vborg.vbsupport.ru/showthrea...threadid=40595

Instructions:

• Backup all your files as well as your database.
  For help backing up your database, look here: http://www.vbulletin.com/docs/html/m...atabase_backup
• Upload vbmailreply.php to your /includes/cron/ folder
• Upload mimeDecode.php to your /includes/ folder
• Open the file /includes/functions_newpost.php in your favourite PHP editing program.

• FIND (around line 196):
   
  $post['poststarttime'] = trim($post['poststarttime']);
   
  ADD BELOW:
   
  if ($post['isemail']) { $bbuserinfo = $post['userinfo']; }
   
   
  FIND (around line 273):
   
  if ($vboptions['logip'])
   
  REPLACE WITH:
   
  if ($vboptions['logip'] AND !$post['isemail'])
   
   
  FIND (around line 321):
   
  if ($prevpostfound)
  {
   
  ADD BELOW:
   
  if ($post['isemail'])
  {
  return ('dupepost');
  }
  else
  {
   
   
  FIND:
   
  }
  else
  {
  if ($parentid == 0 AND $type != 'thread')
   
  REPLACE WITH:
   
  }
  }
  if (!$prevpostfound)
  {
  if ($parentid == 0 AND $type != 'thread')
   
   
  FIND:
   
  	$useremails = $DB_site->query("
  		SELECT user.*, subscribethread.emailupdate
  		FROM " . TABLE_PREFIX . "subscribethread AS subscribethread, " . TABLE_PREFIX . "user AS user
  		LEFT JOIN " . TABLE_PREFIX . "usergroup AS usergroup ON (usergroup.usergroupid = user.usergroupid)
  		WHERE subscribethread.threadid = $threadid AND
  			subscribethread.emailupdate IN (1, 4) AND
  			subscribethread.userid = user.userid AND
  			user.usergroupid <> 3 AND
  			user.userid <> " . intval($userid) . " AND
  			user.lastactivity > " . intval($lastposttime['dateline']) . " AND
  			(usergroup.genericoptions & " . ISBANNEDGROUP . ") = 0
  	");
   
  REPLACE WITH:
   
  	$useremails = $DB_site->query("
  		SELECT user.*, userfield.*, subscribethread.emailupdate
  		FROM " . TABLE_PREFIX . "subscribethread AS subscribethread, " . TABLE_PREFIX . "user AS user
  		LEFT JOIN " . TABLE_PREFIX . "userfield AS userfield ON (userfield.userid = user.userid)
  		LEFT JOIN " . TABLE_PREFIX . "usergroup AS usergroup ON (usergroup.usergroupid = user.usergroupid)
  		WHERE subscribethread.threadid = $threadid AND
  			subscribethread.emailupdate IN (1, 4) AND
  			subscribethread.userid = user.userid AND
  			user.usergroupid <> 3 AND
  			user.userid <> " . intval($userid) . " AND
  			user.lastactivity > " . intval($lastposttime['dateline']) . " AND
  			(usergroup.genericoptions & " . ISBANNEDGROUP . ") = 0
  	");
   
   
  FIND:
   
  $evalemail["$languageid"] = '$message = "' . str_replace("\\'", "'", addslashes(iif(empty($email_text[PHRASETYPEID_MAILMSG]), $emails['-1'][PHRASETYPEID_MAILMSG],$email_text[PHRASETYPEID_MAILMSG]))) . '";'.
   
  ADD ABOVE:
   
  $touserfieldcode = "field".$vboptions[mailserver_profilefieldid];
  $subjectcode_reply = "[thread-".$threadinfo[threadid]."-".$touser[$touserfieldcode]."]";
  $subjectcode_newthread = "[newthread-".$foruminfo[forumid]."-".$touser[$touserfieldcode]."]";

• Add the following as a translation of the phrase notify:
  

  Hello $touser[username],
   
  $bbuserinfo[username] has just replied to a thread you have subscribed to entitled - $threadinfo[title] - in the $foruminfo[title] forum of $vboptions[bbtitle].
   
  This thread is located at:
  $vboptions[bburl]/showthread.php?t=$threadinfo[threadid]&goto=newpost
   
  ~~~~~ NEW ~~~~~
  New at $vboptions[bbtitle]!
  You can now reply to the thread by replying to this message. All you need to do is to make sure this code appears in the email subject:
  $subjectcode_reply
  You should also remove this text to ensure your reply is readable by other forum users.
  Additionaly, you can start a new thread in the $foruminfo[title] Forum simply by sending a mail to $vboptions[mailserver_emailaddress] with this code in the subject: $subjectcode_newthread
  ~~~~~ NEW ~~~~~
   
  Here is the message that has just been posted:
  ***************
  $pagetext
  ***************
   
  There may be other replies also, but you will not receive any more notifications until you visit the forum again.
   
  Yours,
  $vboptions[bbtitle] team
   
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Unsubscription information:
   
  To unsubscribe from this thread, please visit this page:
  $vboptions[bburl]/subscription.php?do=usub&t=$threadinfo[threadid]
   
  To unsubscribe from ALL threads, please visit this page:
  $vboptions[bburl]/subscription.php?do=viewsubscription&folderid=all

• Upload the file vbmailreply_install.php to your admincp folder
• Be sure to either have a POP3 or IMAP email account ready before running the installation. The data will need to be entered.
• Open your browser and go to http://www.yourforums.com/admincp/vb...ly_install.php and follow the instructions.
• Delete the vbmailreply_install.php file from your webserver.

Donations:
This hack will always be free, however your donations are kindly accepted and will help towards further development. If you donate, please leave me some info (either your forum site or username at vB.org) so that I can thank you.

Install:

Don't feel like donating, but still want to thank me for my work? Click the install button to show your appreciation. As a great side effect, you'll get an email update once there is a bigger update or important security fix!

Updates:

09.08.2004 - I've updated the vbemailreply_install.php file, as there was an wrong value while entering the settings.

Also added support for SSL (untested)
Fixed the whole install routine.
03.11.2004 - Updated the installation as well as the vbemailreply.php file.

[Lionel]

would that be ok with vbulletin and you if I zip and mail you a copy of function_newpost with licence info removed?

[Colin F]

Oh, just thought of something: are you sending the emails from the email account that is associated with your user?

[Lionel]

sure of course. I receive the notification and I click reply.

[dethfire]

awesome idea, I'm excited for a stable version

[Lionel]

Something new is happening. I enabled access masks and gave myself permissions all over. Now the error message is no longer saying that I have no permissions to access FORUMS. The permissions error is about accessing THREAD. I disabled access masks, and it still says no permission to post in thread.

[Colin F]

That would actually mean that the thread is hidden or locked or something...

I'll have a look at it when I get some time.

[Lionel]

I tought you should be the first to know: I am able to insert a thread.
The problem was from another hack....

Thank you for a super hack!!! :banana:

[Lionel]

But right after that, I got an error with [newthread] same old permissions and other post with [thread] in same forum were not successful. Maybe there is a time limit in script to avoid flooding?

[Lionel]

is there a way to bypass site's email account and directly put in the email which is sending in the subscribed threads?

[Colin F]

Originally Posted by Lionel

is there a way to bypass site's email account and directly put in the email which is sending in the subscribed threads?

I've looked at that as well, but from what I see, that would require a change to the vbmail() function...