The Arcive of Official vBulletin Modifications Site.

vbMicroStats: page load time, queries, GZIP and PHP version · **Released**: 03-06-2002

[high]Looking for VB3 version? Is here.[/high]

This hack will add at the bottom of each vBulletin(powered) page the following stats:
- load time of specified page in microseconds (with custom no. of digits to show)
- number of queries executed
- server GZIP library compression status
- vBulletin DEBUG mode
- PHP version
- PHP percent page usage
- MySQL percent page usage
- Server Load
[high]This is not only estethic, it will also help you troubleshoot any wierd queries that you have in your scripts.
The hack is template based so you can edit it the way you want in few seconds.[/high]
NOTE: From users experiences, this hack will work only with PHP 4.0.6 or higher. Let me know if it works with a lower PHP version.

THE FIX FOR VB2.3.0 IS HERE.

HACK UPDATES
Version 2.1
------------------------------------
Changes:
- added Server Load

NOTE: I spoked with Kevin 'tubedogg' from vBulletin Support team and he explained to me that not all the servers are configured to support the [high]@exec("uptime")[/high].
Contact your host for more details and ask them about this issue.
For a full explanation of your 3 server load values, read more here.

*If you want to have the stats viewable only by admins, read this post.

Version 2.0
------------------------------------
Changes:
- added vBulletin DEBUG Mode
- removed the Details link
- cleaned a little the code to match VB2.2.6
- better explanations into the install file.

Version 1.7
------------------------------------
[high]VB2.2.5:[/high]
Minor change in admin/db_mysql.php. Read more here on how to update your hack.
Minor change in forum/global.php. Read more here on how to update your hack.

Changes:
- corrected negative values on certain servers.

Version 1.6
------------------------------------
Changes:
- PHP version and GZIP library status viewable only to admin.
- added a link to Detailed Stats View (generated by vBulletin), for that specific page. Only admins can view that link.

To see how it looks a Detailed View, click here.

Version 1.5
------------------------------------
Added:
- GZIP library status is now related to your vBulletion options.
- GZIP library compression level.

Version 1.4
------------------------------------
Bugs corrected:
- GZIP library status not displayed properly on certain servers.

Version 1.3
------------------------------------
Bugs corrected:
- vbPortal display code in modules

The hack is template based now.
All you have to do is call it with the {getmicrostats} string, anywhere you want (for example in footer).
You also have the choice to install it as template based or coded directly into your functions.php file.

Version 1.2
------------------------------------
Added the PHP and MySQL page percentage.
(Addon by Chen 'FireFly' Avinadav)

Version 1.1
------------------------------------
vB.org decided to add this hack to their board.

Bugs corrected:
- incorrect time load
- incorrect query count

You like this hack? Please click on the [high]Install[/high] button.
To download the latest version of this hack, click below:

TECK · #**102** 03-10-2002, 11:14 PM

george, here it is:

Code:

1. Page generated in 0.7345470 seconds (96.28% PHP - 3.72% MySQL) with 15 queries.
2. Page generated in 0.8443970 seconds (96.82% PHP - 3.18% MySQL) with 15 queries.
3. Page generated in 0.6960710 seconds (71.68% PHP - 28.32% MySQL) with 15 queries.
4. Page generated in 0.9797110 seconds (66.31% PHP - 33.69% MySQL) with 15 queries.
5. Page generated in 0.6964480 seconds (96.46% PHP - 3.54% MySQL) with 15 queries.

i just refreshed 5 times and posted the results.

about your time:

Code:

Time before: 0.012995958328247
Time after:  0.027544975280762

this is extremly small, so that means you do not call it before and after the headers. that explains the negative values in PHP and MySQL.

FWC · #**103** 03-11-2002, 03:28 AM

Quote:

Originally posted by nakkid
[high]IF YOU DOWNLOADED A PREVIOUS VERSION,
MAKE SURE YOU CLEAR YOUR TEMP FILES, CACHE AND HISTORY,
BEFORE YOU REDOWNLOAD THE UPDATED FILE![/high]
I noticed that, when you download again an attachment, it will store it as the old install. The easiest way to see if you have the right version, is to look at the top of the file, it will say there Version 1.4.

Why don't you just change the name of the file with each upgrade? It would be easier for everybody. :classic:

TECK · #**104** 03-11-2002, 03:56 AM

i tried. it will do the same, if i delete the attachment and upload a new one called vbmicrostats2.txt, if i click on the download link, it will save it as vbmicrostats.txt to my pc.. wierd huh? and btw, this was the solution firefly gave me.

regards,
nakkid.

FWC · #**105** 03-11-2002, 04:17 AM

Quote:

Originally posted by nakkid
i tried. it will do the same, if i delete the attachment and upload a new one called vbmicrostats2.txt, if i click on the download link, it will save it as vbmicrostats.txt to my pc.. wierd huh? and btw, this was the solution firefly gave me.

regards,
nakkid.

Bummer.

onder:

dyt4 · #**106** 03-11-2002, 05:29 AM

works great thanks again

Jawelin · #**107** 03-11-2002, 08:25 AM

Quote:

Originally posted by nakkid
did you modified properly db_mysql.php? the PHP percent is pulled from there.

Yes. I did from the 1.1 ver and always checked wasn't changed in any new release of your hack.

P.S.: just a question about GZIP. My server supports it (as written in phpinfo and $HTTP_ACCEPT_ENCODING...), but in my VB options I disabled it to decrease server CPU load.

1) Do you think it should displayed 'enabled' or 'disabled' in your hack ? Standing on the bare code, I guess only the server var status is checked, not the vb one too...

2) Do you think I should enable it to increase performances ? How the cpu load should be acceptably higher ?

Thanks a lot.

Jawelin · #**108** 03-11-2002, 11:53 AM

Just as an addendum to point 1 just above, I used this small customization about gzip:

Code:

within: function dooutput($vartext,$sendheader=1) { 

add 

       $gzipoutput,$gziplevel 
at the end of 
       global .... row.

then add 

       if ($gzipoutput and $gziplevel)
           $gziptext.=" and active (level $gziplevel)";
right after 
       $gziptext="enabled";

:cross-eyed:

Btw, my questions above about negative value (as eva said, mostly on the main page somethimes...) and the cpu overloading with gzip, REMAIN ....

Thanks a lot
Bye

nuno · #**109** 03-11-2002, 05:05 PM

very nice hack nakkid
working gr8

thx

TECK · #**110** 03-11-2002, 06:33 PM

Upgrade your vbMicroStats to Version 1.5:

forum/admin/functions.php
1. in [high]function dooutput()[/high], find the code:

PHP Code:


			
global $pagestarttime,$query_count,$showqueries,$querytime,$DB_site,$microstats,$HTTP_ACCEPT_ENCODING;

replace it with:

PHP Code:


			
global $pagestarttime,$query_count,$showqueries,$querytime,$DB_site,$gzipoutput,$gziplevel,$microstats;

2. find the code:

PHP Code:


			
  if (strpos(" ".$HTTP_ACCEPT_ENCODING,"gzip")) {

    $gziptext="enabled";

  } else {

    $gziptext="disabled";

  }

replace it with:

PHP Code:


			
  if ($gzipoutput==1) {

    $gziptext="enabled (level $gziplevel)";

  } else {

    $gziptext="disabled";

  }

[high]NOTE:[/high] The GZIP compression will show as enabled only if you enabled your board to use GZIP compression.
To do this, do yo your [high]VBulletin Options > HTTP Headers and output > GZIP Output[/high] and select Yes.
Otherwise, it will show as disabled.

okrogius · #**111** 03-11-2002, 10:35 PM

Quote:

Originally posted by nakkid
Upgrade your vbMicroStats to Version 1.5:

forum/admin/functions.php
1. in [high]function dooutput()[/high], find the code:

PHP Code:

global $pagestarttime,$query_count,$showqueries,$querytime,$DB_site,$microstats,$HTTP_ACCEPT_ENCODING;

replace it with:

PHP Code:

global $pagestarttime,$query_count,$showqueries,$querytime,$DB_site,$gzipoutput,$gziplevel,$microstats;

2. find the code:

PHP Code:

if (strpos(" ".$HTTP_ACCEPT_ENCODING,"gzip")) { $gziptext="enabled"; } else { $gziptext="disabled"; }

replace it with:

PHP Code:

if ($gzipoutput==1) { $gziptext="enabled (level $gziplevel)"; } else { $gziptext="disabled"; }

[high]NOTE:[/high] The GZIP compression will show as enabled only if you enabled your board to use GZIP compression.
To do this, do yo your [high]VBulletin Options > HTTP Headers and output > GZIP Output[/high] and select Yes.
Otherwise, it will show as disabled.

Is there a clean install txt directions file telling how to isntall 1.5? If you can email it to me that would be great. oleg@gaminguru.com

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.04693 seconds Memory Usage 2,345KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (3)bbcode_code (8)bbcode_php (4)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (2)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!