The Arcive of Official vBulletin Modifications Site.

Rules and User Agreement Hack · **Released**: 10-05-2005

This modification currently contains a vulnerability. You are hereby advised to disable this modification until such time that the author provides a fix.
- vBulletin.org Staff

Rules and User Agreement Hack-------------------------------------
Hack Version: 1.1.5
vB-version: 3.5
Developer: WwW.UAEWEB.CoM
Install-difficulty: Easy
Port of: https://vborg.vbsupport.ru/showt...threadid=77666

Introduction:
Rules and User Agreement Hack Is an agreement rules systems, that requires user to agree to each individual forum or/and pages rules within the whole board community ?if applicable? prior to permission them to different action (Viewing a Forum, Posting New Thread for the first time, Posting New Thread, Posting Reply).

This will limit the forum breaches that occur often due to unawareness of the rules and agreement. This shall automate the manual procedures that are followed by users to read the ?rules and agreement? and will enforce to some extent the users to be aware of rules in place. Moreover this will eliminate the options of any denial by certain users of not being aware of ?rules and agreements? being in place for the desired forum.

This can also be used as alerts, broadcasts, messages and tutorials? etc to certain individual, multi users or groups.

Features:

Unlimited* Rule(s).
An Individual Forum can have multi rules agreement.
An Individual FILE within your forum can have mutli rules agreement.
List All Rules that user has agreed to from his/her profile page "if a url was provided".
Edit/Delete Rule(s).
Reset Rule(s) Manually or with Cron Job.
Rules can use bbcode.
Set to show a rule(s) agreement in any selected forum/page (file url) IF:

- User's Usergroup is Y.
- User's Additional Usergroups is Y.
- User's User Id is X.
- User's User Name is XXX.
- User's first time posting a new thread in this forum.
- User's has posts greater than x posts.
- User's has posts less than x posts.
- User's Join Date is After (yyyy-mm-dd).
- User's Join Date is Befor (yyyy-mm-dd).
- User's Last Activiy is After (yyyy-mm-dd).
- User's Last Activiy is Befor (yyyy-mm-dd).
- User's Last Post is After (yyyy-mm-dd).
- User's Last Post is Befor (yyyy-mm-dd).
* Can Use Conditionals.

Fully "phrased" so translations are made easy.

Settings in the Admin CP:

List Rule(s).
Add New Rule(s).
Edit / Delete Rule(s).
Reset Rule(s).
Activate and Inactivate Rule(s)

Screenshots:

See attachments.

Hack Installation Details:

1 Product XML with 3 Plugins, and 45 Phrases

New files for this Hack: 3
/admincp/rulesagreement.php
/includes/cron/cron_ruleshack.php
/includes/xml/cpnav_rulesagreement.xml

New templates for this Hack: 2
ruleshack_rules
ruleshack_rulesbit

File-edits: 0

Template-edits: 1
MEMBERINFO

New DB tables for this Hack: 1
ruleshack

DB Tables modified for this Hack: 1
user

How to Install:
To install this hack, simply download the zip file, Unzip it to a directory on your computer and follow the steps from README.txt

History:
1.0.0
Initial Version for vBulletin 3.5

1.1.0
Added Rule(s) from URL
Fixed typo in Phrase

1.1.1
Fixed bug with new registration
-> to upgrade, import product-rulesagreement.xml and set Allow Overwrite to yes

1.1.2
Fixed bug with Reseting Rules every 12 hours
-> to upgrade, import product-rulesagreement.xml and set Allow Overwrite to yes

1.1.3
Fixed bug with with TABLE_PREFIX missing
-> to upgrade, import product-rulesagreement.xml and set Allow Overwrite to yes

1.1.4
Fixed bug with with Template / memberinfo Agreed Rules List
-> to upgrade, import product-rulesagreement.xml and set Allow Overwrite to yes

1.1.5
Fixed bug with this & this
-> to upgrade, import product-rulesagreement.xml and set Allow Overwrite to yes

PLEASE REMEMBER TO BACKUP BEFORE YOU BEGIN!

If you like this hack, please be kind and click on

Firestar.chkn · #92 12-17-2005, 04:21 PM

Quote:

Originally Posted by Pocketbike Planet

Great hack! But...

I can't find a setting to have this displayed for all forums when posting a new thread or reply. I don't want to have to make a new rule set for each individual forum (we don't have any sub forums). I tried to set it for the main category but of course this did not work.

Any suggestions?

Just add the rule to the main category and add the checkbox "include in child forums" and it will add it for all forums.

Awesome hack, btw. I love it, and will be using it all the time

Installs

kommuni · #93 12-18-2005, 12:24 PM

Quote:

Originally Posted by Firestar.chkn

Just add the rule to the main category and add the checkbox "include in child forums" and it will add it for all forums.

Awesome hack, btw. I love it, and will be using it all the time

Installs

Quote:

Just add the rule to the main category and add the checkbox "include in child forums" and it will add it for all forums.

I have about 8 Categories on top level... i don't see any category "above"?!

Would be great if this option could be added. My users should agree to new rules when logging into the forums next time - regardless where they login... This doesn't seem to be possible so far.

Thanks!

redlabour · #94 12-18-2005, 03:02 PM

Quote:

Originally Posted by kommuni

I have about 8 Categories on top level... i don't see any category "above"?!

Would be great if this option could be added. My users should agree to new rules when logging into the forums next time - regardless where they login... This doesn't seem to be possible so far.

Thanks!

Same at me !

vibe · #95 12-18-2005, 07:08 PM

When I click on agree and submit, browser takes me to this URL

Code:

http://www.agalico.com/php/php.exe?f=65...

Security Alert! The PHP CGI cannot be accessed directly.

This PHP CGI binary was compiled with force-cgi-redirect enabled. This means that a page will only be served up if the REDIRECT_STATUS CGI variable is set, e.g. via an Apache Action directive.

Can anyone help me figure it out why? I'v been trying to troubleshoot this problem forever, still having find out why.

Thanks.

redlabour · #96 12-23-2005, 06:48 AM

Quote:

Originally Posted by kommuni

I have about 8 Categories on top level... i don't see any category "above"?!

Would be great if this option could be added. My users should agree to new rules when logging into the forums next time - regardless where they login... This doesn't seem to be possible so far.

Thanks!

Anybody supporting this Hack ?

steven s · #97 12-26-2005, 11:34 PM

I want people to read an agreement before
linking to /newthread.php?do=hpde
Is this possible?
Edit: nevermind. I figured it out.

kommuni · #98 01-03-2006, 07:11 AM

Hi together,

as there doesn't seem to be anymore support for this hack, i helped myself and found a solution for that previously named problem.

I'll post it here and you may use it at your own risk!

With this modification, you're able to setup rules for every page. With such a global rule everyone first has to agree to this rule before beeing able to read any of your forums (or even gallery, arcade, any hack that uses vb-templateparser).

the only thing you need to modify is the template_parser plugin from the rules & agreementhack. Just xchange the complete code with this:

PHP Code:


			
$hackagree = array();



    $vbulletin->input->clean_array_gpc('p', array('hackagree' => TYPE_ARRAY_INT, 'forumid' => TYPE_INT, 'oldurl' => TYPE_STR, 'do' => TYPE_STR));

    $ruleids = implode(",", $vbulletin->GPC['hackagree']);



    $scripturl1 = iif ($_SERVER['SCRIPT_URI'], $_SERVER['SCRIPT_URI'], "http://" . $_SERVER['HTTP_HOST'] . $_SERVER['SCRIPT_NAME']);

    $urluri = $scripturl1 . iif($_SERVER['QUERY_STRING'], "?" . $_SERVER['QUERY_STRING']);

                    

if ($ruleids)

{

        //Lets see if this user has agreed or not (Update agreed ruleid)

        update_rules($ruleids, $vbulletin->GPC['forumid']);

}

else

{     



    if ($vbulletin->GPC['hackagree']<>1)

    {

            // Check for all list of RULE to be apply for this page...

        $ruletext = check_newrules($vbulletin->GPC['forumid']);



         if ($ruletext)

        {

           $navbits = array();

           $parentlist = array_reverse(explode(',', substr($foruminfo['parentlist'], 0, -3)));

           foreach ($parentlist AS $forumID)

          {

           $forumTitle = $forumcache["$forumID"]['title'];

           $navbits["forumdisplay.php?$session[sessionurl]f=$forumID"] = $forumTitle;

          }



        // parse headinclude, header & footer

        $admincpdir =& $vbulletin->config['Misc']['admincpdir'];

        $modcpdir =& $vbulletin->config['Misc']['modcpdir'];



       $navbits[''] = $vbphrase['ruleshack_rules_and_agreement'];

       $navbits = construct_navbits($navbits);

        if (empty($navbar))

       eval('$navbar = "' . fetch_template('navbar') . '";');

        if (empty($headinclude))

        eval('$headinclude = "' . fetch_template('headinclude') . '";');

        if (empty($header))

        eval('$header = "' . fetch_template('header') . '";');

                

        if (defined('VBA_PORTAL'))

        {

            require_once(DIR . '/includes/vba_cmps_include_bottom.php');

        }        

        if (empty($footer))

        eval('$footer = "' . fetch_template('footer') . '";');





            if ($_REQUEST['do'] == 'postreply')

             {

                 $rule = array();

                 $rule['postreply']        = 1;

                 $rule['wysiwyg']        = $_REQUEST['wysiwyg'];

                 $rule['quickreply']        = $_REQUEST['quickreply'];

                 $rule['message']        = addslashes($_REQUEST['message']);

                 $rule['fromquickreply']    = $_REQUEST['fromquickreply'];

                 $rule['t']                = $_REQUEST['t'];

                 $rule['p']                = $_REQUEST['p'];

                 $rule['parseurl']        = $_REQUEST['parseurl'];                 

             }

             

       eval('print_output("' . fetch_template('ruleshack_rules') . '");');

        exit;

        }    

    }

}



//     function "check_rulesneed" to find any rules exist for this page....

     function check_rulesneeded()

      {

           global $vbulletin, $urluri, $scripturl1;                               

                           

          $ruleneed = $vbulletin->db->query_first("SELECT * FROM " . TABLE_PREFIX . "ruleshack 

            WHERE (fileurl LIKE '" . $urluri . "' AND exactmatch = 1 ) 

            OR (fileurl LIKE '" . $scripturl1 . "%' AND exactmatch = 0 )

            OR (fileurl LIKE 'all' AND exactmatch = 0) AND active = 1 ORDER BY ruleid");

           

          if (!$ruleneed)

           return false;

          else

           return true;           

      }



//     function "check_newrules" to find all the rules to be agreed by this user

    function check_newrules($fid = 0)

    {

    global $vbulletin, $foruminfo, $vbphrase, $stylevar, $urluri, $scripturl1;

 

        if ((!$fid) and (!check_rulesneeded()))

         return false;



    //Lets check what rule(s) this user should get

    

        $vbulletin->userinfo['agreedrule'] = iif($vbulletin->userinfo['agreedrule'], $vbulletin->userinfo['agreedrule'], '0');



        $parents = iif($vbulletin->forumcache[$vbulletin->GPC['forumid']]['parentlist'], $vbulletin->forumcache[$vbulletin->GPC['forumid']]['parentlist'], '0');



        $parentids = array();            

        $parentids = iif($parents, explode(',', str_replace(' ', '', $parents)), 0);

        

                 if (($_COOKIE[COOKIE_PREFIX . 'rules']) and ($vbulletin->userinfo['userid']==0))

                foreach($_COOKIE[COOKIE_PREFIX . 'rules'] AS $key => $value)

                 {

                $allrules .= " :: " . $key;

                $vbulletin->userinfo['agreedrule'] .= iif($vbulletin->userinfo['agreedrule']!='',",","") . $value;

                 }



        $sql = "SELECT * from " . TABLE_PREFIX . "ruleshack 

            WHERE 

            (

            (forumid = $fid)

            OR 

            (fileurl LIKE '" . $urluri . "' AND exactmatch = 1 ) 

            OR 

            (fileurl LIKE '" . $scripturl1 . "%' AND exactmatch = 0 )

            OR 

            (fileurl LIKE 'all' AND exactmatch = 0 )

            OR 

            (forumid IN ($parents))

            ) 

            AND 

            (ruleid not in (" . $vbulletin->userinfo['agreedrule'] . ")) 

            AND 

            active = 1 

            ORDER BY ruleid";

    

        $rule = $vbulletin->db->query($sql);

                                        

 $i = 1;

while ($rules = $vbulletin->db->fetch_array($rule))

    {

         

        $flag        = 0;

        $condflag    = 0;

        $groupflag    = 0;

        $memberflag = 0;

        

    // Lets start our rules



    // Rule #1 : USER is from Selected Usergroup(s)

          if ($rules['groupids'])

        {

            $gids    = array();            

            $gids    = explode(',', str_replace(' ', '', $rules['groupids']));

             if (in_array($vbulletin->userinfo['usergroupid'], $gids))

              {

                 $flag = 1;

                $groupflag = 1;

              }                       

        }

    

    // Rule #2 : USRE is from Selected Membergroup(s)

        if ($rules['memberids'])

         {

            $mids    = array();

            $mgids    = explode(',', str_replace(' ', '', $vbulletin->userinfo['membergroupids']));

            $mids    = explode(',', str_replace(' ', '', $rules['memberids']));

        

            foreach ($mgids as $ids) 

             {             

             if (in_array($ids, $mids))

              {

                 $flag      = 1;

                $memberflag = 1;

              }

             }    

         }    

         

                if ( ($groupflag==1) or ($memberflag==1) )

                  $condflag = 1;

                else

                  $condflag = 0;        

                

    // Rule #4 : USER is from Selected Userid(s)

          if ($rules['userids'])

        {

            $uids    = array();            

            $uids    = explode(',', str_replace(' ', '', $rules['userids']));

             if (in_array($vbulletin->userinfo['userid'], $uids))

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }

        

    // Rule #5 : USER is from Selected Username(s)

          if ($rules['usernames'])

        {

            $unames    = array();

            $unames    = explode(',', str_replace(' ', '', $rules['usernames']));

             if (in_array($vbulletin->userinfo['username'], $unames))

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }

    

// All the Condition from Rule #6 - Rule #13 for VB Users....

if ($vbulletin->userinfo['userid'] > 0 )

 {

    // Rule #6 : User has More than X post(s)

          if ($rules['postmore'])

        {

            if ($vbulletin->userinfo['posts'] > $rules['postmore']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #7 : User has Less than X post(s)

          if ($rules['postless'])

        {

            if ($vbulletin->userinfo['posts'] < $rules['postless']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #8 : Join date is After xxx Date

          if ($rules['joindateafter'])

        {

            if ($vbulletin->userinfo['joindate'] > $rules['joindateafter']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #9 : Join date is Before xxx Date

          if ($rules['joindatebefore'])

        {

            if ($vbulletin->userinfo['joindate'] < $rules['joindatebefore']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #10 : Last visit is After xxx Date

          if ($rules['lastactiveafter'])

        {

            if ($vbulletin->userinfo['lastvisit'] > $rules['lastactiveafter']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #11 : Last visit is Before xxx Date

          if ($rules['lastactivebefore'])

        {

            if ($vbulletin->userinfo['lastvisit'] < $rules['lastactivebefore']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #12 : Last post is After xxx Date

          if ($rules['lastpostafter'])

        {

            if ($vbulletin->userinfo['lastpost'] > $rules['lastpostafter']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }



    // Rule #13 : Last post is Before xxx Date

          if ($rules['lastpostbefore'])

        {

            if ($vbulletin->userinfo['lastpost'] < $rules['lastpostbefore']) 

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }

 }

// All the Condition from Rule #6 - Rule #13 for VB Users....



    // Rule #14 : Rule apply for Child forum....

            if (($parentids) and ($fid != $rules['forumid']))

            {    

             if ((in_array($rules['forumid'], $parentids)==1) and ($rules['childforum']==1))

              {

                 $flag      = 1;

                $condflag = 1;

               }

               else {

                $condflag = 0;

              }     

            }

                        

    // Rules from URL     

                $flag = 0;

            if ($condflag == 1)

             {                          

                     if ($rules['fileurl'])

                      {

                    $urlpos = strrpos($urluri, $rules['fileurl']);                                                                       

                     // Rule #14 : Show Rules on URL match.....

                         if (($rules['fileurl'] == $urluri) and ($rules['exactmatch']==1))

                         {

                              $flag = 1;

                              $condflag = 1;                  

                         } else {

                              $condflag = 0;

                         }

                              

                    // Rule #15 : Show Rules on URL match.....

                         if (($urlpos) and ($rules['exactmatch']==0))

                         {

                              $flag = 1;

                              $condflag = 1;                  

                         } else {

                              $condflag = 0;

                         }

              // Rule #14 + 15 : Show Rules regardless to URL.....

                if(($rules['fileurl']=='all') and ($rules['exactmatch']==0)) 

                {

                    $flag = 1;

                    $condflag = 1;

                } else {

                    $condflag = 0;

                }





                      }

             

    // Rule #16 : First Thread ever in this Forum by this User

          if (($rules['firstnewthread']) and ($fid!=0) and ($_REQUEST['do'] == 'newthread'))

        {

        $result = $vbulletin->db->query_first("SELECT * from " . TABLE_PREFIX . "thread 

            WHERE forumid = $fid and postuserid = " . $vbulletin->userinfo['userid'] . " ");

            if (!$result)

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                $condflag = 0;

             }

        }

             

                          

    // Rule #17 : Show Rules on New Thread....

          if ($rules['newthread'])

        {        

            if ($_REQUEST['do'] == 'newthread')

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

               $condflag = 0;

              }

        } else {

            $condflag = 0;

        }

                                     

    // Rule #18 : Show Rules on New Post....

          if ($rules['newreply'])

        {        

            if ($_REQUEST['do'] == 'newreply' or $_REQUEST['do'] == 'postreply') 

              {

                 $flag      = 1;

                $condflag = 1;

              }else

                $condflag = 0;

        } else {

            $condflag = 0;

        }

    

    // Rule #19 : Show Rules on View Forum....

          if ($rules['viewforum'])

        {        

            if (($fid) and ($_REQUEST['do'] != 'newreply' and $_REQUEST['do'] != 'newthread' and $_REQUEST['do'] != 'postreply'))

              {

                 $flag      = 1;

                $condflag = 1;

              }else {

                  $condflag = 0;              

              }

        }

            } else {

            $condflag = 0;

            }

                

    // Rules End ... Thank you



        if ($rules['conditions'])

            if ($condflag == 0)

              $flag = 0;

                         

        if ($flag == 1)

        {

            $ruletitle    = $rules['ruletitle'];

            $ruleid        = $rules['ruleid'];

          if ($rules['allowbbcode'])

            {

            require_once(DIR . '/includes/class_bbcode.php');

            $bbcode_parser =& new vB_BbCodeParser($vbulletin, fetch_tag_list());

            $ruletextbit    = $bbcode_parser->parse($rules['ruletext']);

            }

            else

            {

            $ruletextbit    = $rules['ruletext'];

            }

        eval('$ruletext .= "' . fetch_template('ruleshack_rulesbit') . '";');

        $i++;

        }

    }        

        return $ruletext;

 }    

    

    function update_rules($rid = '', $f = 0)

    {

        global $vbulletin ;



        // You gotta agree on this

        

        if ($rid)

        {            

            $vbulletin->db->query("UPDATE " . TABLE_PREFIX . "user SET agreedrule = '" . 

            iif($vbulletin->userinfo['agreedrule'], $vbulletin->userinfo['agreedrule'] . ",", "") . $rid . "' 

            WHERE userid = " . $vbulletin->userinfo['userid']);            



                vbsetcookie("rules[". $rid ."]",$rid);

                

                    if ($_REQUEST['do'] != 'postreply')

                exec_header_redirect($vbulletin->GPC['oldurl']);

        }

        

        return 1;

    }

    

function fetch_user_agreed_rules()

 {

    global $vbulletin, $threadinfo, $userinfo;

        

        if ($_REQUEST['find'] == 'lastposter' AND $userinfo)

         {

             $uid = $userinfo['userid'];

         }        

    $uid = iif($_REQUEST['u'], $_REQUEST['u'], $uid);

    if ($uid > 0)

     { 

            $Ruser = fetch_userinfo($uid);        

        $ruleids = iif($Ruser['agreedrule'], $Ruser['agreedrule'], 0);

        $result     = $vbulletin->db->query("SELECT * from " . TABLE_PREFIX . "ruleshack 

                WHERE ruleid in ($ruleids) AND ruleurl <> ''");



        while ($ruleinfo = $vbulletin->db->fetch_array($result))

         {

            $agreedrules .= "<tr><td><a href='" . $ruleinfo['ruleurl'] . "'>" . $ruleinfo['ruletitle'] . "</a></td></tr>";

         }

     }

        return $agreedrules;

 }

Then setup a rule with URL "all" (just type in these three letters in the url field) and set exact match to no.

That's all.

It's kind of a 'dirty' solution but it's working and should not have any negative consequences. I've setup some new forumrules for my 15k+ board and it's working very well.

Best,
Frank

bcrooms · #99 01-04-2006, 01:35 AM

How can I change the text in this hack......I want the checkbox to have a Mission Statement of my own writing in it. Where do I change that?

-B

uae · #**100** 01-05-2006, 08:41 AM

Quote:

Originally Posted by kommuni

Hi together,
Then setup a rule with URL "all" (just type in these three letters in the url field) and set exact match to no.

That's all.

It's kind of a 'dirty' solution but it's working and should not have any negative consequences. I've setup some new forumrules for my 15k+ board and it's working very well.

Best,
Frank

Sorry guys, but I have been busy with the vB Pager hack and did not have the time to add any new featurs to the rules hack.

kommuni, again, I haven't tried your changes yet, but I'll do that as soon as I get the time.

bcrooms, I'm sorry, but I did not get it, are you talking about this text "I have read, and agree to abide by the ....."

if so, then you need to edit phrase "ruleshack_agree_abide_by_rules"
and if you were talking about a whole new rules, then you will need to create a new rule and add whatever text...all that can be done from your ADMINCP, just look @ the screen shots!

kommuni · #**101** 01-05-2006, 09:01 AM

Quote:

Sorry guys, but I have been busy with the vB Pager

so where is it?

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.05479 seconds Memory Usage 2,545KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (1)bbcode_code (1)bbcode_php (7)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (4)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (1)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!