Add-On Releases - Attached Image Watermarking PLUS Guest Viewing of Thumbnails

I had been looking for these two options for quite a while, and was finally able to hire Brian (of vBadvanced) to write them for me. Since a lot of people have been looking for this, I have decided (with Brian's permission) to release this as a free, unsupported, modification.

This modification will allow you to specify a watermark image that will be overlayed over any attached JPG or PNG file on your site in real time, as the image is displayed. NO PERMANENT CHANGES ARE MADE TO ANY OF YOUR ATTACHMENTS. You can also exclude specific forums and usergroups from seeing the watermark.

As an added bonus, he included the ability to allow guests to see attached image thumbnails, while still requiring them to register to see the full size attachments. (Make sure you have your Unregistered / Not Logged In usergroup set to NOT have access to download attachments.)

PLEASE CLICK INSTALL so that maybe Jelsoft will include these as built-in features in a future version.

Notes/Troubleshooting:

• Your server needs to have GD2 installed.
• Attachments must be stored in the file system. Database storage of file attachments will not work.
• Make sure you use the full PHYSICAL path to your watermark image.
• Make sure you have a low number in the width/height setting. (I use 200, since my watermark image is 150 pixels wide.)
• If you have previously viewed the attached image, your browser may cache it, so you will need to clear your browser cache or force a hard refresh (CTRL-F5) while viewing the image to get the new watermarked version.

Well, on to the modification:

=============================================
STEP 1:
Since the resulting file contains too much vBulletin code, I am unable to include it with this modification. So, the first step is to copy vBulletin's attachment.php to a file named attachment_watermark.php. Then, edit attachment_watermark.php, making the following changes.

=============================================
STEP 2:
You need to delete a LOT of lines from the top of the file. Find this line...

$idname = $vbphrase['attachment'];

...and delete everything ABOVE it other than the <?php line at the top of the file.

Your attachment_watermark.php file should begin with this code when you've completed this step:

<?php
$idname = $vbphrase['attachment'];

=============================================
STEP 3:
Find this line of code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

REPLACE with this code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) AND !$vbulletin->GPC['thumb'])  OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

=============================================
STEP 4:
Find these lines of code:

	else
	{
		$attachpath = fetch_attachment_path($attachmentinfo['userid'], $attachmentinfo['attachmentid']);

Add this code BELOW the lines referenced above:

// #########################################
// ##### Start modified section for watermarks
// #########################################

$vbulletin->options['attach_water_exforums'] = explode(',', $vbulletin->options['attach_water_exforums']);
$vbulletin->options['attach_water_exgroups'] = explode(',', $vbulletin->options['attach_water_exgroups']);


if ($vbulletin->options['attach_water_filelocation']
	AND in_array($extension, array('jpg', 'jpeg', 'png'))
	AND !in_array($attachmentinfo['forumid'], $vbulletin->options['attach_water_exforums'])
	AND !array_intersect(fetch_membergroupids_array($vbulletin->userinfo), $vbulletin->options['attach_water_exgroups'])
)
{
	$attachsize = getimagesize($attachpath);

	if ($attachsize[0] >= $vbulletin->options['attach_water_minsize'] AND $attachsize[1] >= $vbulletin->options['attach_water_minsize'])
	{
		$waterimage =& $vbulletin->options['attach_water_filelocation'];
		$watersize = getimagesize($waterimage);

		$waterext = strtolower(substr($waterimage, strrpos($waterimage, '.') + 1));

		// Coordinates (height)
		switch ($vbulletin->options['attach_water_coordinates'][0])
		{
			case 'n':
				$waterpos['height'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'm':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1]) / 2);
			break;
			case 's':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Coordinates (width)
		switch ($vbulletin->options['attach_water_coordinates'][1])
		{
			case 'w':
				$waterpos['width'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'c':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0]) / 2);
			break;
			case 'e':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Watermark ext
		switch ($waterext)
		{
			case 'jpg':
			case 'jpeg':
				$watermark = imagecreatefromjpeg($waterimage);
			break;

			case 'png':
				$watermark = imagecreatefrompng($waterimage);
			break;
		}

		// Attachment ext
		switch ($extension)
		{
			case 'jpg':
			case 'jpeg':
				$attachimage = imagecreatefromjpeg($attachpath);
			break;

			case 'png':
				$attachimage = imagecreatefrompng($attachpath);
			break;
		}

		imagealphablending($attachimage, true);

		$watermark_width = imagesx($watermark);
		$watermark_height = imagesy($watermark);

		imagecopy($attachimage, $watermark, $waterpos['width'], $waterpos['height'], 0, 0, $watersize[0], $watersize[1]);
		define('WATERMARKED', true);
	}
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 5:
Find this line of code:

header('Content-Length: ' . (($lastbyte + 1) - $startbyte));

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// ##### Changed to prevent filesize header on watermarked images
// #########################################
if (!defined('WATERMARKED'))
{
	header('Content-Length: ' . (($lastbyte + 1) - $startbyte));
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 6:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_display')) ? eval($hook) : false;

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// #########################################
if (!$vbulletin->GPC['thumb'] AND defined('WATERMARKED'))
{
	imagejpeg($attachimage);
	imagedestroy($attachimage);
	imagedestroy($watermark);
}
// #########################################
// ##### End modified section for watermarks

=============================================
STEP 7:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_complete')) ? eval($hook) : false;

REPLACE with this code:

exit;

=============================================
STEP 8:
Save and upload attachment_watermark.php to your forum root directory.


=============================================
STEP 9:
Install the product-attach_watermark.xml Product via the vBulletin AdminCP Product Manager.


=============================================
STEP 10:
Configure the options at AdminCP -> vBulletin Options -> Attachment Watermarks. All fields should be self-explanatory.

[ConqSoft]

You shouldn't attach that because it contains too much vBulletin code.

But, double check everything because it's working fine for others. It could also be a conflict with some other mod you have installed.

[Ntfu2]

When this is enabled some thumbnail images become broken? When disbaled, they all work just fine. Any idea?

[ConqSoft]

No idea... Do you have any other attachment/thumbnail related hacks running that may conflict?

[Sychev_S]

Thank you, Works like a charm!

[Pottsy]

This mod is great - thank you for sharing!

One issue (and I think it's me being thick or just the way vB works) - I display images in line to registered users (no pesky thumbnails). If I want to show thumbs to unregistered users, I need to turn on thumbnails (and build them), but there seems to be no way to now let registered users to view in line.

So, can I show thumbs to unregistered users but still show full images inline to registered users?

[ConqSoft]

Not without some additional hacking/mods....

[Pottsy]

Thanks - was just checking I understood it correctly.

One more thing - when the watermark is displayed (I'm using a transparent png) the overall quality of the displayed jpg goes down quite significantly. Is there any way around this?

[voter]

Originally Posted by benjaminkramer

yes I did
here is my attachment_watermark.php

I tested your attachment, works without problems.

Check if you really change your Attachment Storage Type into Filesystem

And the path to watermark image is correct in AdminCP -> vBulletin Options -> Attachment Watermarks

[voter]

How about pictures putted via [ IMG ][ /IMG ] tags? Is there any way to put a watermark on them,too?

[ConqSoft]

Originally Posted by voter

How about pictures putted via [ IMG ][ /IMG ] tags? Is there any way to put a watermark on them,too?

No, this works for attached images only. If the images are on other servers you don't have any control over them, so you can't.

( Plus, they aren't on your server anyway, so you don't really have the right to watermark them. )