Last XX Posts on non-vB page

UPDATED! Not a new version number, but a bug fix.
Fixed another bug with using forum titles and included forums.
New update: *Actually* fixed the bug with the forums this time.
------------------------------------------------------------------------------------

It's my best work to date (if I do say so myself ) and I think you'll like it and like all the configuration you can do.

This image shows the script with all of the columns on, and parsing [code], smilies, and the post icon, as well as showing the forum title before the thread title.


This image shows the script with all the columns off except $lastpostdate, and the $tw (table width) set to 600, and $showdate set to 0 (to just show the last post time).


This image shows the same as #2, except $tw is blank (allowing the table to compact and remove the empty space automatically).


Hack version: 1.0.1

Changes since version 1.0.0: Fixed small bug.

Changes since version 0.1.0: Parses [ b], [ i], [ u], [ code], and [ quote] within the "last post". Displays the icon of the post, or the thread if there is no post icon. Parses smilies. New option to convert new lines to <br> so the post appears as the author wrote it (note: may cause problems if there are large breaks in posts).

Changes since version 0.0.2: New option to show the text of the last post of a thread (also option to limit the number of characters of the post displayed). New option to set the table width, as a percent, a number of pixels, or just let the table size naturally. New option to show just the time of the last post, instead of the date *and* the time. New option to show a thin line around the cells (cell spacing).

Changes since version 0.0.1: Include only specific forums, or set to allow all forums except certain excluded forums. New option to display a "Last post date" column with the last post date and time, formatted with your board's date & time setting. Fixed a bug with font and font size. Split the config into a separate file to make editing easier.

For version: v2 betas 3, 4, 5, RC1, RC2.

Files needed: last10.php, last10config.php (see attached zip file).

Files to edit: last10config.php (see attached zip file).

Possible file locations: Anywhere, as long as the relative path to config.php and the URL to your board are correct. Also, you must put last10.php and last10config.php in the same directory!

Instructions
1] Unzip the files last10.php and last10config.php to your hard drive.
2] Open last10config.php in an ASCII text editor, such as Notepad (Windows), SimpleText (Mac), EditPlus, UltraEdit, TextPad, etc. (DO NOT use WYSIWYG HTML editors such as FrontPage, HotDog, DreamWeaver, etc. They will in all likelyhood screw up the file! I will not be able to support you if you edit the file in one of these programs.)
3] Edit the variables at the top. These are:

1. $path > path to your config.php file (usually in the /admin directory) - NO TRAILING SLASH! and DO NOT PUT config.php at the end of it! ( e.g. forums/admin )
2. $url > URL to your board - NO TRAILING SLASH! ( e.g. http://www.mysite.com/forums )
3. $urlimg > URL to your board's images - NO TRAILING SLASH ( e.g. http://www.mysite.com/forums/images ).
4. $maxthreads > max threads to show. will show less if $last24 or $last7 limits it to less results than this number
5. $ob > determines the sort order of the list. replycount and views are numbers, lastposter is a name, title is the name of the thread, and lastpost is the last posts' date. set to one of the following: replycount , views , lastposter , title , lastpost (lastpost is most popular. it's the thread most recently replied to, then the second-to-last most recent, etc.)
6. $obdir > set to "desc" or "asc". which direction to sort? "desc" goes from bottom to top (9 to 1, z to a, etc.). "asc" goes top to bottom (1 to 9, a to z, etc.)
7. $last24 > set to 1 to limit the possible results to the last 24 hours; 0 for no limit (must set this to 0 if $last7 is set to 1)
8. $last7 > set to 1 to limit the possible results to the last 7 days; 0 for no limit (must set this to 0 if $last24 is set to 1)
9. $bc1 > first alt color (for the alternating colored rows)
10. $bc2 > second alt color
11. $hc > head background color (title, last poster, etc.)
12. $lc > text link color
13. $tc > text color
14. $f > font face
15. $fs > font size in points. 6 is on the small side, 10 on the large side. Put only a number in this - no "pt", "pts", or anything else!
16. $lastposter > show the "last poster" column? 1 = yes; 0 = no
17. $views > show the view count for each thread? 1 = yes; 0 = no
18. $replies > show the reply count for each thread? 1 = yes; 0 = no
19. $lastpostdate > show the last post date and time for each thread? 1 = yes; 0 = no
20. $len > maximum number of characters of the title to show. e.g. if the title is 60 characters and this is set to 25, only the first 25 characters of the title will be shown (followed by ...)
21. $excludeforums > List certain forums to be excluded. Best used if you have a large number of forums you *do* want included and only a few that you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $includeforums! Use one or the other.
22. $includeforums > List certain forums to be included. Best used if you have a small number of forums that you want included and a large number you want excluded. List them separated by commas, but without spaces - e.g. 1,2,3,4 - and DO NOT fill in both this and $excludeforums! Use one or the other.
23. $showmessages > If you want to show the last post of the thread as well, set this to 1. You can limit the number of characters displayed in $lplen below.
24. $lplen > If you specify a number here, any post that has more than $lplen number of characters will be reduced to this number and "..." added to the end of it. If you don't want to use this feature, leave it blank e.g. "" - remember though that if $showmessages is set to 0, this won't do anything.
25. $tw > If you want to specify the width of the table, you can set it as a percent e.g. 95% or as a number of pixels e.g. 300 or just leave it blank and the table will size itself.
26. $showdate > If you want to show the date *and* the time, set this to 1. If you want to just show the time, set this to 0.
27. $cs > If you want a thin line around your cells, set this to 1 (or higher - experiment!). Set to 0 for no line.
28. $nb > if you want breaks in text to appear as such, set this to 1. otherwise set it to 0 (this may cause problems if there are large breaks in the text)
29. $showforumtitle > if you want to show the forum title, linked to that forum, for each thread also (forum title: thread title) then set this to 1. otherwise set it to 0.
30. $showicon > if you want to show the icon the author chose for their post, set this to 1. otherwise set it to 0.

4] Upload both last10.php and last10config.php to your website. You can include last10.php as follows. To include it on a PHP-parsed page (.php, .php3, .phtml, etc.):
<? include("last10.php"); ?>
To include it on a server-parsed page (.shtml, .shtm, .ssi, etc.):
<!--#include file="last10.php"-->

Instructions are also included in the zip file (last10.txt).

FEEDBACK WANTED! Likes/dislikes/modification requests all gladly accepted!

Please DO NOT contact me via IM or PM about this hack. Post your problem/question here and I will try to help you.

[Ed FvC]

Is there a way to remove the first 0 from the time? Right now, it's showing 05:45am and it'd look nicer without the 0. How can I change it?

Thanks!

I have a problem

The page where I want to display the last active threads in on 1 server with a certain domain:

http://www.findsp.com

which is ASP based (windows 2000).

The forum itself is:

http://130.94.137.116

So how do I do the include?

Please note that the page where I want to include the last active threads is .ASP and is on server findsp.com


Thanks

Looking forward hearing from you.

Hey tubedogg,

Is it possible to modify the display of this hack so that it looks like the "Latest Headlines" column on the left hand side of http://www.dw3d.com website?

I believe this site is using UBB with a hack. I really like how the text is wrapped into two or three lines if need be, and every headline is seperated by a, well, seperator



Thanks

[Oystein]

It seems that the script doesn't work on post made by unregistered users... At least my 3 post when I was not logged in doesn't show, but when I log in and reply to one of them, they are ok....

I'd appreciate if this could be confirmed and mayby changed :-)

I couldn't get this to work on an NT server.
Anybodu tried this successfully with WinNT?

Thanks

[jarvis]

I couldn't get this to work on an NT server.

Well, I guess I need to understand your question a little more. Are you saying you can't get this to work at all under NT, because this is just a standard vB (PHP-based) hack, and if you have your board running alright, you should be able to run this no problem.

Now if you are talking about trying to include this hack in a IIS-based page, you will have problems. IIS apparently doesnt handle multilevel translations well.

Your include statement will work, however IIS will not parse the PHP code, because it is looking for standard txt or html files. A microsoft limitation, no doubt.

I, too, was disappointed that I could not get this running on my IIS server, but to see how I worked around it, check out www.mhogaming.com and hold over the forums menu.

Not exactly what I wanted, but an easy way to view the last xx posts.

-Jarv

Thanks Jarvis, I guess that's why it's messing up. I can load the PHP file directly without any problems as well but I would've loved to use this hack as the news headliner on my homepage and have it linked directly to a particular forum's list of topics.

Mr. tubedogg, would you be kind enough to release a javascript version of this hack or something that would make it run in Windows NT/2000 based server?

Thanks
Abbas

[eva2000]

hey kevin instaled your latest release of this hack but have a question similar to this one at http://vbulletin.com/forum/showthrea...threadid=20407

i included the last 10 - 15 active threads on these 2 sites

http://bubblegumcrisis2040.com/forum/
http://www.eva2000.com/forum/

as well as the online user list in the above thread.

But when you close the forum from admin control panel it will all chuck a fit and come up scrambled.

Is there some extra code i can add to the end of the scripts which can output a simple

"Forum database is down for maintenance, be back soon..."

[TigerLily]

Thanks tubedogg for this great hack! I haven't had any trouble installing it, but I do have a question. How do I include my headers and footers so the page looks like my forum pages? I would love to make it look like it's a seamless part of them.

Thanks!
TigerLily

Update: I worked my way around it by using an shtml page instead, but was wondering if there was a simpler way to include the default forum headers and footers.

[Oystein]

Still no reply to my question...

How can it be changed so posts made by unregistered users also are shown on the overview?