vB3 Forumhome Stats Cache Serialize hack v2.2

vB3 Forumhome Stats Cache Serialize hack
Version 2.2
(By Boofo)

What does this hack do?
This hack will add some forum statistics to your forumhome that will be cached (to reduce the query load) for a certain amount of time that can be set to whatever you want. This covers most of the stats any forum Admin would use on his site.

Note: This is the setting for the time interval (in minutes) that you want the cache to be updated on. The default value is 10 minutes. The following code is in the index.php part of this hack.

$updatetime = 10;

Once you install the Admin CP setting (at the end of this file), you will be able to update this from the Admin CP vBulletin Options settings.

Credits:
I want to thank Tigga for the original Forumhome Statistics Cache hack for vB2, partly on what this hack is based. I also want to thank EvilLS1 for his time and patience in helping put this hack together. Another thank you goes out to Mike Gaidin for testing this thoroughly while I was putting together this install file. And, finally, thank you goes out to NTLDR, for helping me track down a very stupid mistake on my part which I had overlooked.

Version 2.0 credits go out to g-force2k2 for getting me started on the datastore version of this hack and guiding me through some of the rough parts in the beginning. And also to KirbyDE for answering all of my dummy questions while writing this version and verifying the code when I figured out all of my mistakes. This is my first attempt at using the datastore function but it seems to work better and be easier to code than the older way of doing things.

Version Information:
Version 1.0 --Initial release
Version 2.0 --Completely rewritten using the datastore function for vB3. It now uses "serialize" to store the data and "unserialize" to retrieve the data. There is also now 1 less query when reading from the cache.
Version 2.1 --Combined the "new threads since last visit" and "new posts since last visit" queries into 1 query, thus eliminating another query on cache hits. Thanks goes out to g_force2k2 for this one. Also added Admin CP setting code so you can change the time interval between cache updates via the Forum Display Option setting in the vBulletin Option in the Admin CP. That code to add is at the end of this file.
Version 2.2 --Added "Top Reputation" statistic (requested by rinkrat ) and totally re-did the template. It looks cleaner now.

New Installation:
Do all of the steps in this file.

To Update Version 1.0 to Version 2.0:
To update this hack you will need to do everything in this file over again except the second query (Query #2). After you have this hack up and running again and you have made sure it is running to your satisfaction, you can drop the statscache table (from version one of this hack) completely. It is no longer needed.

To Update Version 2.0 to Version 2.1:
You will need to re-add the code for the index.php and go to the end of this file and add the setting for the Admin CP.

To Update Version 2.1 to Version 2.2:
You will need to re-add the code for the index.php and replace the code for the forumhome template.

Installation overview:
Queries to run: (2)
Files to edit: (2)
--index.php
--member.php
Templates to edit: (1)
--forumhome
Settings to add: (1)
--forumhomecachetime

vB3 Arcade hack stats addon:
https://vborg.vbsupport.ru/showpost....&postcount=262

The first attachment shows the Guest loggedin and the second attachment show the Registered Member and above loggedin.

[Pseudomizer]

Hi Boofo,

i need a quick guidance in here. The field of "Most viewed Profile" is every time 0. Even if i go in my own profile with the IE and use another username with Opera and set the interval to update every 1 minute. Every time it is 0.

I searched this thread but no one had this problem before. :ermm:

Any ideas why ?

Cheers,

*clicked install even if it is installed only on the testboard yet*

[Boofo]

If you are view your own profile, it won't add views to it. I did that so someone couldn't rack up the profileviews on their own account by continually refreshing it.

Try viewing someone else's profile a few times and it will show up (as long as you have the query added to the member.php, that is).

[Pseudomizer]

Originally Posted by Boofo

If you are view your own profile, it won't add views to it. I did that so someone couldn't rack up the profileviews on their own account by continually refreshing it.

Try viewing someone else's profile a few times and it will show up (as long as you have the query added to the member.php, that is).

Good job to prevent someone pushing up the number of views for their own profile. Now i tested with multiple users and it works.

I heading now for the install on the live board. Good job with this hack.

Cheers,

[Astovidatu]

Yea, nice job!
But i think theres an error: "Top Poster: Astovidatu (756 Posts = 142,93%)" <- hows taht possible?

[Pseudomizer]

Originally Posted by Astovidatu

Yea, nice job!
But i think theres an error: "Top Poster: Astovidatu (756 Posts = 142,93%)" <- hows taht possible?

Perhaps you missed that part here

Just an idea.

Cheers,

[Astovidatu]

Originally Posted by Pseudomizer

Perhaps you missed that part here

Just an idea.

Cheers,

Yep indeed, thanks. Dut now it looks like this:
Top Poster: Astovidatu (756 Posts = 0,14%)

Thats not possible either by a sum of 3000 Posts total.

[Boofo]

Originally Posted by Astovidatu

Thanks, but now it looks like this:
Top Poster: Astovidatu (756 Posts = 142.93)
Top Thread Starter: Astovidatu (121 Threads = 23)

The same just without percentage sign.

My code:

	$statscache['newthreads'] = intval ($newestthreads[count]) ;
	$statscache['newposts'] = intval ($newestposts[count]);
	$statscache['newusers'] = intval ($newestusers[count]);
	$statscache['getthreadviews'] = intval ($getthreadviews[tviews]);
	$statscache['topposter'] = $topposter[username];
	$statscache['topposterid'] = intval ($topposter[userid]);
	$statscache['toppostercount'] = intval ($topposter[posts]);
	if($statscache['topposterpercent'] > 100)
{
$statscache['topposterpercent'] = vb_number_format(($topposter[posts] / ($totalthreads + $totalposts)) * 100 / 1000, 2 ) . '%';
}
else
{
$statscache['topposterpercent'] = vb_number_format(($topposter[posts] / ($totalthreads + $totalposts)) * 100, 2) . '%';
}
	$statscache['topstarter'] = $topstarter[postusername];
	$statscache['topstarterid'] = intval ($topstarter[postuserid]);
	$statscache['topstartercount'] = intval ($topstarter[count]);
if($statscache['topthreadspercent'] > 100)
{
$statscache['topthreadspercent'] = vb_number_format(($topstarter[count] / $totalthreads) * 100 / 1000, 2 ) . '%';
}
else
{
$statscache['topthreadspercent'] = vb_number_format(($topstarter[count] / $totalthreads) * 100, 2) . '%';
} 
	$statscache['getfileviewsun'] = $getfileviews[username];
	$statscache['getfileviewsid'] = intval ($getfileviews[userid]);
	$statscache['getfileviews'] = intval ($getfileviews[profileviews]);
	$statscache['ref2'] = $ref[username];
	$statscache['topreferrerid'] = intval ($ref[userid]);
	$statscache['ref'] = intval ($ref[referrals]);
	$statscache['toprepun'] = $toprep[username];
	$statscache['toprepid'] = intval ($toprep[userid]);
	$statscache['topreprep'] = intval ($toprep[reputation]);
	$statscache['lastupdate'] = intval (TIMENOW);

and I deleted the 2 if - else statements you told.

I have a fix for all of the percentages that I am working on getting into the install file now. You might want to click the install button so when update the hack in the next few days, that you will be notified.

[ImportPassion]

Little problem here

Most Viewed Profile: 007 (0 Views)

Oh, just noticed this too...
Last updated at 07:00 PM - December 31st, 1969

After first update.

Shouldn't this default to N/A or something?

[Boofo]

Originally Posted by 7thgenCivic.Com

Little problem here

Most Viewed Profile: 007 (0 Views)

Oh, just noticed this too...
Last updated at 07:00 PM - December 31st, 1969

After first update.

Shouldn't this default to N/A or something?

You need to set the updatetime to 0 and run it a couple of times when you first install it. The profileviews will only update when you view someone's profile and NOT your own. I don't have it counting views when the person is looking at their own profile. Look at someone else's profile a couple of times and it will show up.

[ImportPassion]

ok, i will check it out. but that profile is not mine.