Add-On Releases - Attached Image Watermarking PLUS Guest Viewing of Thumbnails

I had been looking for these two options for quite a while, and was finally able to hire Brian (of vBadvanced) to write them for me. Since a lot of people have been looking for this, I have decided (with Brian's permission) to release this as a free, unsupported, modification.

This modification will allow you to specify a watermark image that will be overlayed over any attached JPG or PNG file on your site in real time, as the image is displayed. NO PERMANENT CHANGES ARE MADE TO ANY OF YOUR ATTACHMENTS. You can also exclude specific forums and usergroups from seeing the watermark.

As an added bonus, he included the ability to allow guests to see attached image thumbnails, while still requiring them to register to see the full size attachments. (Make sure you have your Unregistered / Not Logged In usergroup set to NOT have access to download attachments.)

PLEASE CLICK INSTALL so that maybe Jelsoft will include these as built-in features in a future version.

Notes/Troubleshooting:

• Your server needs to have GD2 installed.
• Attachments must be stored in the file system. Database storage of file attachments will not work.
• Make sure you use the full PHYSICAL path to your watermark image.
• Make sure you have a low number in the width/height setting. (I use 200, since my watermark image is 150 pixels wide.)
• If you have previously viewed the attached image, your browser may cache it, so you will need to clear your browser cache or force a hard refresh (CTRL-F5) while viewing the image to get the new watermarked version.

Well, on to the modification:

=============================================
STEP 1:
Since the resulting file contains too much vBulletin code, I am unable to include it with this modification. So, the first step is to copy vBulletin's attachment.php to a file named attachment_watermark.php. Then, edit attachment_watermark.php, making the following changes.

=============================================
STEP 2:
You need to delete a LOT of lines from the top of the file. Find this line...

$idname = $vbphrase['attachment'];

...and delete everything ABOVE it other than the <?php line at the top of the file.

Your attachment_watermark.php file should begin with this code when you've completed this step:

<?php
$idname = $vbphrase['attachment'];

=============================================
STEP 3:
Find this line of code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

REPLACE with this code:

if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewthreads']) OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['cangetattachment']) AND !$vbulletin->GPC['thumb'])  OR (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND ($attachmentinfo['postuserid'] != $vbulletin->userinfo['userid'] OR $vbulletin->userinfo['userid'] == 0)))

=============================================
STEP 4:
Find these lines of code:

	else
	{
		$attachpath = fetch_attachment_path($attachmentinfo['userid'], $attachmentinfo['attachmentid']);

Add this code BELOW the lines referenced above:

// #########################################
// ##### Start modified section for watermarks
// #########################################

$vbulletin->options['attach_water_exforums'] = explode(',', $vbulletin->options['attach_water_exforums']);
$vbulletin->options['attach_water_exgroups'] = explode(',', $vbulletin->options['attach_water_exgroups']);


if ($vbulletin->options['attach_water_filelocation']
	AND in_array($extension, array('jpg', 'jpeg', 'png'))
	AND !in_array($attachmentinfo['forumid'], $vbulletin->options['attach_water_exforums'])
	AND !array_intersect(fetch_membergroupids_array($vbulletin->userinfo), $vbulletin->options['attach_water_exgroups'])
)
{
	$attachsize = getimagesize($attachpath);

	if ($attachsize[0] >= $vbulletin->options['attach_water_minsize'] AND $attachsize[1] >= $vbulletin->options['attach_water_minsize'])
	{
		$waterimage =& $vbulletin->options['attach_water_filelocation'];
		$watersize = getimagesize($waterimage);

		$waterext = strtolower(substr($waterimage, strrpos($waterimage, '.') + 1));

		// Coordinates (height)
		switch ($vbulletin->options['attach_water_coordinates'][0])
		{
			case 'n':
				$waterpos['height'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'm':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1]) / 2);
			break;
			case 's':
				$waterpos['height'] = round(($attachsize[1] - $watersize[1])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Coordinates (width)
		switch ($vbulletin->options['attach_water_coordinates'][1])
		{
			case 'w':
				$waterpos['width'] = 0 + $vbulletin->options['attach_water_padding'];
			break;
			case 'c':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0]) / 2);
			break;
			case 'e':
				$waterpos['width'] = round(($attachsize[0] - $watersize[0])) - $vbulletin->options['attach_water_padding'];
			break;
		}

		// Watermark ext
		switch ($waterext)
		{
			case 'jpg':
			case 'jpeg':
				$watermark = imagecreatefromjpeg($waterimage);
			break;

			case 'png':
				$watermark = imagecreatefrompng($waterimage);
			break;
		}

		// Attachment ext
		switch ($extension)
		{
			case 'jpg':
			case 'jpeg':
				$attachimage = imagecreatefromjpeg($attachpath);
			break;

			case 'png':
				$attachimage = imagecreatefrompng($attachpath);
			break;
		}

		imagealphablending($attachimage, true);

		$watermark_width = imagesx($watermark);
		$watermark_height = imagesy($watermark);

		imagecopy($attachimage, $watermark, $waterpos['width'], $waterpos['height'], 0, 0, $watersize[0], $watersize[1]);
		define('WATERMARKED', true);
	}
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 5:
Find this line of code:

header('Content-Length: ' . (($lastbyte + 1) - $startbyte));

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// ##### Changed to prevent filesize header on watermarked images
// #########################################
if (!defined('WATERMARKED'))
{
	header('Content-Length: ' . (($lastbyte + 1) - $startbyte));
}
// #########################################
// ##### End modified section for watermarks
// #########################################

=============================================
STEP 6:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_display')) ? eval($hook) : false;

REPLACE with this code:

// #########################################
// ##### Start modified section for watermarks
// #########################################
if (!$vbulletin->GPC['thumb'] AND defined('WATERMARKED'))
{
	imagejpeg($attachimage);
	imagedestroy($attachimage);
	imagedestroy($watermark);
}
// #########################################
// ##### End modified section for watermarks

=============================================
STEP 7:
Find this line of code:

($hook = vBulletinHook::fetch_hook('attachment_complete')) ? eval($hook) : false;

REPLACE with this code:

exit;

=============================================
STEP 8:
Save and upload attachment_watermark.php to your forum root directory.


=============================================
STEP 9:
Install the product-attach_watermark.xml Product via the vBulletin AdminCP Product Manager.


=============================================
STEP 10:
Configure the options at AdminCP -> vBulletin Options -> Attachment Watermarks. All fields should be self-explanatory.

kinda cool, i think i will tweak on it..

[Kanustep]

Sound interesting, thank you ConqSoft.

[FleaBag]

A fantastic tool to drive registration on 2 fronts. Very kind of you to release it, thanks.

[PKRWUD]

I installed it, but it's not showing up. Does the watermark itself have to be a .jpg or .png file? I used a .gif file.

*edit*

I tried it with a .png file, and still no luck.

[ConqSoft]

A transparent .PNG is the best thing to use for the watermark.

[Gryphon]

jpg or png for watermark. However, I can't get it to work either.

[ConqSoft]

Your server needs GD2 installed also. (Edited above.)

It's possible that I made a mistake with the modification instructions. Since I just have the fully modified file, I had to build the change instructions from that. I'll look over it and see if I missed anything. It would be much easier to just include the file, but it may violate site policy since it contains a lot of original vBulletin code.

[ConqSoft]

Ok, I found two errors. Please re-do steps 5 and 6.

[Ntfu2]

Conq if this works, and you ever want to have kids, i'll have them for you