The Arcive of Official vBulletin Modifications Site.

Upcoming Events · **Released**: 12-27-2009

Upcoming Events

Released 28/12/2009
By Vikas - http://www.ngcoders.com

Installation

Goto Admincp->vBullietin CMS->Widgets->Create New Widget
Choose PHP Direct Execution as Widget's Type
Place a Title. eg Upcoming Events. Keep it short as this is what will appear as title on your pages.
Click Save
Click Configure on the right of the new created widget.
Remove the default code that appears. Be sure to not leave behind even a single letter.
Copy and Paste the code that you can find below.
Leave the template name as is (vbcms_widget_execphp_page)
Click Save
Goto Admincp->vBullietin CMS->Layout Manager
Click Go on the Default Layout
Add the Widget to your Layout
Click Save
That's all !!

PHP Code

PHP Code:


			


ob_start();





//  %d

$show_count = 5;



$query = sprintf("SELECT * FROM ".TABLE_PREFIX."event WHERE visible = 1 AND (dateline_from > '%d' || (  dateline_from > '%d' AND dateline_to < '%d' )) ORDER BY dateline_from ASC LIMIT %d",TIMENOW,TIMENOW,TIMENOW,$show_count);



$event_get = vB::$db->query_read($query);



$output_bits = '';

while($event = vB::$db->fetch_array($event_get)) {



     if($event['dateline_to'] == 0 )

     {

         $format = sprintf("On %s",date('jS M Y',$event['dateline_from']));

     } else {

         $format = sprintf("From %s to %s",date('jS M Y',$event['dateline_from']),date('jS M Y',$event['dateline_to']));

     }

     

     $output_bits .= sprintf('

        <div class = "cms_widget_post_bit"><h4 class="cms_widget_post_header"><a href="calendar.php?do=getinfo&e=%d">%s</a></h4>

            <p class="cms_widget_post_content">%s</p>

        </div>

        ',$event['eventid'],$event['title'],$format);



}

$output = $output_bits;



ob_end_clean();

TheChief · #**222** 05-16-2011, 09:55 PM

What I'm after is the upcoming events to be displayed.

And (if ranged) the start and end times

In english

No historical events to be displayed

Sorry to be a pain in the ass

tomsch · #**223** 05-16-2011, 10:20 PM

ok the code in my earlier post does that. how ever it only displays the date are you say you want the time displayed also??

TheChief · #**224** 05-17-2011, 05:06 AM

If you could that'd be great

TheChief · #**225** 05-17-2011, 05:13 AM

This is the code i'm currently using.......

Quote:

ob_start();

$show_count = 5;

$query = sprintf("SELECT * FROM ".TABLE_PREFIX."event WHERE visible = 1 AND (dateline_from > '%d' || ( dateline_from > '%d' AND dateline_to < '%d' )) ORDER BY dateline_from ASC LIMIT %d",TIMENOW,TIMENOW,TIMENOW,$show_count);

$event_get = vB::$db->query_read($query);

$output_bits = '';
while($event = vB::$db->fetch_array($event_get)) {

if($event['dateline_to'] == 0 )
{
$datefrom = date('j',$event['dateline_from']);
$datefrom = $datefrom+1;
$format = sprintf("On ".$datefrom."th %s",date('M Y',$event['dateline_from']));
} else {
$datefrom = date('j',$event['dateline_from']);
$datefrom = $datefrom + 1;
$dateto = date('j',$event['dateline_to']);
$dateto = $dateto + 1;
$format = sprintf("From ".$datefrom."th %s to ".$dateto."th %s",date('M Y',$event['dateline_from']),date('M Y',$event['dateline_to']));
}

$output_bits .= sprintf('
<div class = "cms_widget_post_bit"><center><h4 class="cms_widget_post_header"><a href="calendar.php?do=getinfo&e=%d">%s</a></h4>
<p class="cms_widget_post_content">%s</p></center>
</div>
',$event['eventid'],$event['title'],$format);

}
$output = $output_bits;

ob_end_clean();

This does everything but the time..............and it seems to remove a planned event for the day as soon as the clock turns midnight (i.e. if there is a meet planned for the 17th May then as the clocks turn from 23:59 (tues) - 00:00 (weds) the event is removed

tomsch · #**226** 05-18-2011, 12:15 AM

Code:

ob_start(); 
global $db,$vbulletin;

$mydate3 =  mktime(0, 0, 0, date("m"), date("d"), date("Y"));

//  %d 
$show_count =10; 

$query = sprintf("SELECT * FROM ".TABLE_PREFIX."event WHERE visible = 1 AND (dateline_from >= '$mydate3' || (  dateline_from >= '$mydate3' AND dateline_to <= '%d' )) ORDER BY dateline_from ASC LIMIT %d",TIMENOW,TIMENOW,TIMENOW,$show_count); 

$event_get = vB::$db->query_read($query); 

$output_bits = ''; 
while($event = vB::$db->fetch_array($event_get)) { 

     if($event['dateline_to'] == 0 ) 
     { 
         $format = sprintf("On %s",vbdate('D M jS Y',$event['dateline_from'],false,true,false,true)); 
     } else { 
         $format = sprintf("From %s to %s",vbdate('D M jS Y h:i:s A',$event['dateline_from'],false,true,false,true),vbdate('jS M Y h:i:s A',$event['dateline_to'],false,true,false,true)); 
     } 
      
     $output_bits .= sprintf(' 
        <div class = "cms_widget_post_bit"><h4 class="cms_widget_post_header"><a href="calendar.php?do=getinfo&e=%d">%s</a></h4> 
            <p class="cms_widget_post_content">%s</p> 
         </div> 
        ',$event['eventid'],$event['title'],$format); 

} 
$output = $output_bits;

this will display the times for the Range events. But there is a small catch when you enter the range event leave the time zone setting to GMT.

i left off the time for the all day event as its always the same time because of the way its stored.

i also fixed a bug in my code the mydate3 variable was commented out for my fixed date.

TheChief · #**227** 05-19-2011, 05:29 AM

Thanks for this..............fantastic stuff

Works perfect and is exactly what i was after

Have a huge bag of kudos

TransAmDan · #**228** 05-27-2011, 01:40 PM

Quote:

Originally Posted by otterag

first i want to say that is a great mod. i have a few questions though.
- Is there a way to change the information that is displayed in the widget box. instead of having it show the date ranges of the event i would like to see it display the Date of the next event upcoming along with the day of the week and the start time

Example
Currently it shows
"Name of Event"
"From 4th March 2011 to 4th July 2011"

What i would like it to show would be
"Name of Event"
"Friday, March 4th @ 3:00pm"

I'm having the same issue and also looking for a solution to this.

top dogs 360 · #**229** 06-15-2011, 09:11 PM

Quote:

Originally Posted by tomsch

Code:

ob_start(); 
global $db,$vbulletin;

$mydate3 =  mktime(0, 0, 0, date("m"), date("d"), date("Y"));

//  %d 
$show_count =10; 

$query = sprintf("SELECT * FROM ".TABLE_PREFIX."event WHERE visible = 1 AND (dateline_from >= '$mydate3' || (  dateline_from >= '$mydate3' AND dateline_to <= '%d' )) ORDER BY dateline_from ASC LIMIT %d",TIMENOW,TIMENOW,TIMENOW,$show_count); 

$event_get = vB::$db->query_read($query); 

$output_bits = ''; 
while($event = vB::$db->fetch_array($event_get)) { 

     if($event['dateline_to'] == 0 ) 
     { 
         $format = sprintf("On %s",vbdate('D M jS Y',$event['dateline_from'],false,true,false,true)); 
     } else { 
         $format = sprintf("From %s to %s",vbdate('D M jS Y h:i:s A',$event['dateline_from'],false,true,false,true),vbdate('jS M Y h:i:s A',$event['dateline_to'],false,true,false,true)); 
     } 
      
     $output_bits .= sprintf(' 
        <div class = "cms_widget_post_bit"><h4 class="cms_widget_post_header"><a href="calendar.php?do=getinfo&e=%d">%s</a></h4> 
            <p class="cms_widget_post_content">%s</p> 
         </div> 
        ',$event['eventid'],$event['title'],$format); 

} 
$output = $output_bits;

this will display the times for the Range events. But there is a small catch when you enter the range event leave the time zone setting to GMT.

i left off the time for the all day event as its always the same time because of the way its stored.

i also fixed a bug in my code the mydate3 variable was commented out for my fixed date.

Two issues, 1) if you leave the time zone to GMT it looks good for the widget but the actual Event shows the event 7 hours behind. Obviously the event creator is GMT -7. Isn't there a way to incorporate a offset time zone in the code?
2) The code is working fine but it shows all events in the widget not the 10 as the cutoff is set for. Can that be fixed?

top dogs 360 · #**230** 06-15-2011, 09:52 PM

Okay this works for me and should fix anyone's problem whether it is ranged events or single day events or the 1 day early problem.

ob_start();

// %d
$show_count = 5;

$query = sprintf("SELECT * FROM ".TABLE_PREFIX."event WHERE visible = 1 AND (dateline_from > '%d' || ( dateline_from > '%d' AND dateline_to < '%d' )) ORDER BY dateline_from ASC LIMIT %d",TIMENOW,TIMENOW,TIMENOW,$show_count);

$event_get = vB::$db->query_read($query);

$output_bits = '';
while($event = vB::$db->fetch_array($event_get)) {

$tz_offset = 86400;
if($event['dateline_to'] == 0 )
{
$format = sprintf("On %s",date('M jS Y',($event['dateline_from']+$tz_offset)));
} else {
$format = sprintf("From %s to %s",date('h:i A M jS Y',($event['dateline_from'])),date('h:i A M jS Y',($event['dateline_to'])));
}

$output_bits .= sprintf('
<div class = "cms_widget_post_bit"><h4 class="cms_widget_post_header"><a href="calendar.php?do=getinfo&e=%d">%s</a></h4>
<p class="cms_widget_post_content">%s</p>
</div>
',$event['eventid'],$event['title'],$format);

}
$output = $output_bits;

ob_end_clean();

It is set to cut off at 5 events, you can adjust that via $show_count = 5.

It has a timezone offset of 1 day via seconds for the 1 day early issue here $tz_offset = 86400

Its format for date is set to Time, Date, Month, and Year via here $format = sprintf("From %s to %s",date('h:i A M jS Y',($event['dateline_from']+$tz_offset)),date('h:i A M jS Y',($event['dateline_to'])));.

And here for the all day events that do not include time of day ; $format = sprintf("On %s",date('M jS Y',($event['dateline_from']+$tz_offset)));
} else {

I am still debating on dropping the Year form the widget since 99% of the time the next 5 events are in the same year anyway. To do that simply drop the Y from the M jS Y or h:i A M jS Y

See it live, 3rd block from the top on the right column. http://xboxhounds.com

I'm simply an amateur but I'm learning with as I go.

Mooff · #**231** 06-15-2011, 11:25 PM

You can customize the date however you want, see the php documentation:
http://www.php.net/manual/en/function.date.php

The time offset should be in the database-query, not in your output date.

As for showing Users their local time. I thought about changeing the widget that way, but then i think i can't use the cms-widget-cache anymore on this particular widget. I just can't imagine the widget beeing created for multiple timezones in the cache.

Second issue with local time is the utc-column in the event-db-table. You need to correct for that value as well, depending on which timezone the user chose upon adding the event.

---------------------------------

Thanks to the creator of the widget. Great work, great idea.

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.06977 seconds Memory Usage 2,363KB Queries Executed 26 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (2)bbcode_code (1)bbcode_php (3)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (4)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (1)pagenav_pagelinkrel (11)post_thanks_box (2)post_thanks_box_bit (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (1)post_thanks_postbit (11)post_thanks_postbit_info (10)postbit (1)postbit_attachment (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start fetch_musername post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end post_thanks_function_fetch_thanks_bit_start post_thanks_function_show_thanks_date_start post_thanks_function_show_thanks_date_end post_thanks_function_fetch_thanks_bit_end post_thanks_function_fetch_post_thanks_template_start post_thanks_function_fetch_post_thanks_template_end postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_attachment postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

2 благодарности(ей) от:
level8, Toorak Times

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!