The Arcive of Official vBulletin Modifications Site.

TalkerBot Add-on - Learning System · **Released**: 01-18-2004

TalkerBot Add-on - Learning System - Working Beta for VB3 RC2

This modification is an addition to the Talkerbot Hack by C.Birch, Rapid Gaming, eXtremeTim
and a rendition of the ideas presented by Martin64 in the Teachbot hack for vb2.x

This hack will not effect the code of the original Talkbot hack and works in a side-car fashion.

Talkerbots and variants:
VB2:
C. birch https://vborg.vbsupport.ru/showthread.php?t=48053
VB3:
Rapid Gaming https://vborg.vbsupport.ru/showthrea...t=60013&page=1
Extremetim https://vborg.vbsupport.ru/showthread.php?t=60329

Teachbot for Vb2
https://vborg.vbsupport.ru/showthrea...light=teachbot

And based around Program E.
Copyright 2002, Paul Rydell
Portions by Jay Myers

Program E is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

A major shout out to whoever wrote the Branch on Count functions, the guy who invented the internet and my mom of course... Wouldn't want to forget to credit anybody eh?

Enough of that, here is the description:

This hack allows you to teach your bot to answer questions that you specify.

To teach the bot you simply post in a specified bot-teaching thread.

The subject of your post is the question, and the body of your post is the answer.
The subject can be a word, and the body can be the definition.
The subject can be a phrase, and the body can be a response.

Posts are accumulated in the bot-teaching thread until you run a botlearner script.

This allows you to moderate the questions and answers your users might contribute before entering them into the bots knowledge base.

Running the botlearner script will do the following:
add posts to the bots knowledge
move posts from learning thread into a "bot-learned" thread

The bot-learned thread is an archive of everything you have taught your bot.
This way you can reset your bot if necessary without losing all that knowledge.
You can also SHARE! what you have taught your bot with other users of the Talkerbot Hack.

Share what your bot has learned! Use http://www.yoururl.com/forum/externa...type=AIMLSHARE

INSTALLATION INSTRUCTIONS:
--------------------------

Backup your stuff if you desire.

Create 2 threads where you want them, a bot-learned thread and a bot-teaching thread.

Make note of the threadid numbers of both threads and the postid number of the
first post in the bot-teaching thread. You will need them in a minute.

In external.php:

Find the switch statement.

Code:

switch ($_REQUEST['type'])
{
	case 'JS':
	case 'XML':
	case 'RSS2':
		break;
	default:
		$_REQUEST['type'] = 'RSS';
}

And insert the line case 'AIML': and
case 'AIMLSHARE':into it.
Like so:

Code:

switch ($_REQUEST['type'])
{
	case 'JS':
	case 'XML':
	case 'AIML':
                case 'AIMLSHARE':
	case 'RSS2':
		break;
	default:
		$_REQUEST['type'] = 'RSS';
}

Still in external.php insert this block into the if-else chain.
Replacing TEACHINGTHREADID,TEACHINGTHREADFIRSTPOSTID, and BOTLEARNEDTHREADID, BOTLEARNEDFIRSTPOSTID with the appropriate numbers.

Code:

else if ($_REQUEST['type'] == 'AIML')
{ // XML/AIML output


	$posts = $DB_site->query("
	SELECT post.title, post.pagetext, post.postid 
	FROM post
	WHERE post.threadid=TEACHINGTHREADID AND post.postid!=TEACHINGTHREADFIRSTPOSTID");

	$postcache = array();
	while ($post = $DB_site->fetch_array($posts))
	{ // fetch the posts
	$postcache[] = $post;
	}

	// set XML type and nocache headers
	header('Content-Type: text/xml');
	header('Expires: ' . gmdate('D, d M Y H:i:s') . ' GMT');
	header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
	header('Pragma: public');

	// print out the page header
        echo '<?xml version="1.0" encoding="' . $stylevar['charset'] . '"?>' . "\r\n";
	echo '<aiml version="1.0">';
	
	
	foreach ($postcache AS $post)
	{
		echo "<category>";
		echo "<pattern>";
		echo strtoupper($post[title]);
		echo "</pattern>\r\n";
		echo "<template>   \r\n";
		echo $post[pagetext]."   \r\n";
		echo "</template>   \r\n";
		echo "</category>   \r\n";
	$DB_site->query("UPDATE post SET threadid=BOTLEARNEDTHREADID WHERE postid=".$post[postid]);
	}
	echo "\r\n</aiml>";
}

Still in external.php insert this block into the if-else chain.
Replacing BOTLEARNEDTHREADID, BOTLEARNEDFIRSTPOSTID with the appropriate numbers.

Code:

else if ($_REQUEST['type'] == 'AIMLSHARE')
{ // XML/AIML output
	$posts = $DB_site->query("
	SELECT post.title, post.pagetext, post.postid 
	FROM post
	WHERE post.threadid=BOTLEARNEDTHREADID AND post.postid!=BOTLEARNEDFIRSTPOSTID");

	$postcache = array();
	while ($post = $DB_site->fetch_array($posts))
	{ // fetch the posts
	$postcache[] = $post;
	}

	// set XML type and nocache headers
	header('Content-Type: text/xml');
	header('Expires: ' . gmdate('D, d M Y H:i:s') . ' GMT');
	header('Cache-Control: must-revalidate, post-check=0, pre-check=0');
	header('Pragma: public');

	// print out the page header
        echo '<?xml version="1.0" encoding="' . $stylevar['charset'] . '"?>' . "\r\n";
	echo '<aiml version="1.0">';
	
	foreach ($postcache AS $post)
	{
		echo "<category>";
		echo "<pattern>";
		echo strtoupper($post[title]);
		echo "</pattern>\r\n";
		echo "<template>   \r\n";
		echo $post[pagetext]."   \r\n";
		echo "</template>   \r\n";
		echo "</category>   \r\n";
	}
	echo "\r\n</aiml>";
}

Upload botlearner.php botlearnerinc.php and botlearnerfuncs.php to the same directory that botloader.php resides in.

should be /forum/alice/src/admin/

In file learnwhat.xml
change the line to fit your forum,

Code:

<learn>http://www.yourforums.com/yourforumdir/external.php?type=AIML</learn>

For each addition site you would like to get shared knowledge from insert a line:

Code:

To get your bot to use this insert the line:
<learn>http://www.shared.com/forum/external.php?type=AIMLSHARE</learn>

on a sidenote if you changed the name of your bot and it's info in startup.xml you'll want
to change it here in learnwhat.xml as well you can do this by making a copy of startup to be the new learnwhat.xml
and changing the line
<learn>*</learn>
to:
<learn>learnwhat.xml<learn>

Back to the straight story:

Upload learnwhat.xml to your AIML dir.

should be /forum/alice/aiml/

Go test things out.

Please let me know if I am an idiot and messed up the process here..

dano · #42 01-23-2004, 12:01 PM

Quote:

Originally Posted by eXtremeTim

Yes thats from your external.php not being hacked correctly.

I really need some help and I am sure its simple. I think I am putting the formats of the threadids and such in wrong. Also, I was not exactly sure where to put the else if stuff as you just said put it in there. Can you help me and just treat me like a dumbass. :nervous:

bigtime · #43 01-23-2004, 03:07 PM

Which hacks are required to be installed before installing [vB3.0.0] - TalkerBot Add-on - Learning System?

I saw this but it is unclear to me what is required to be installed:

"Talkerbots and variants:
VB2:
C. birch https://vborg.vbsupport.ru/showthread.php?t=48053
VB3:
Rapid Gaming https://vborg.vbsupport.ru/show...?t=60013&page=1
Extremetim https://vborg.vbsupport.ru/showthread.php?t=60329

Teachbot for Vb2
https://vborg.vbsupport.ru/show...hlight=teachbot

And based around Program E.
Copyright 2002, Paul Rydell
Portions by Jay Myers

Program E is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version."

Thanks in advance!

Xyphen · #44 01-23-2004, 05:41 PM

Ok, something is wrong with my Bot.. I teach him stuff and he just comes up with his own stuff...

I teached him "Who is Ali?"

Answer "Ali is the owner of sitename."

Asked him "Who is Ali?"

response "I do not recognize the name.<br></br>

Oh now I see."

Teached him "What is your name?"

Answer "My name is Mr. Boto"

Asked him "What is your name?"

Response "My name is Program E."

eXtremeTim · #45 01-23-2004, 05:57 PM

some of that stuff will conflict. Its a matter of finding the right keywords.

dano · #46 01-23-2004, 06:14 PM

I give up, I have tried just about everything and can get it to work correctly. Oh well, guess my bot will never learn anything at all.

Thanks Tim for trying to help me out.

Xyphen · #47 01-23-2004, 08:41 PM

I don't think the learning addon works for me

dano · #48 01-23-2004, 09:13 PM

Quote:

Originally Posted by Xyphen

I don't think the learning addon works for me

Me neither.

Geographic2 · #49 01-24-2004, 05:47 PM

Quote:

Originally Posted by bigtime

Which hacks are required to be installed before installing [vB3.0.0] - TalkerBot Add-on - Learning System?

I saw this but it is unclear to me what is required to be installed:

"Talkerbots and variants:
VB2:
C. birch https://vborg.vbsupport.ru/showthread.php?t=48053
VB3:
Rapid Gaming https://vborg.vbsupport.ru/show...?t=60013&page=1
Extremetim https://vborg.vbsupport.ru/showthread.php?t=60329

Teachbot for Vb2
https://vborg.vbsupport.ru/show...hlight=teachbot

And based around Program E.
Copyright 2002, Paul Rydell
Portions by Jay Myers

Program E is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version."

Thanks in advance!

Either of these will operate fine with this hack add-on for VB3.

VB3:
Rapid Gaming https://vborg.vbsupport.ru/show...?t=60013&page=1
Extremetim https://vborg.vbsupport.ru/showthread.php?t=60329

If you are using VB2, then use the VB2 version and the Teachbot hack by martin64.

Geographic2 · #50 01-24-2004, 06:22 PM

Quote:

Originally Posted by dano

Me neither.

To all those having trouble, extremeTim asked me if he could integrate this with the next version of Talkerbot, I think it's an excellent idea, and hopefully this will make the installation process easier for those having trouble. He's even fixed a couple of the quirks that I left out of my code, such as post count data.

Geographic2 · #51 01-24-2004, 06:35 PM

Quote:

Originally Posted by dano

I really need some help and I am sure its simple. I think I am putting the formats of the threadids and such in wrong. Also, I was not exactly sure where to put the else if stuff as you just said put it in there. Can you help me and just treat me like a dumbass. :nervous:

an if - else chain is a way to execute different code under different circumstances.

In this example of external.php we have these options JS, XML,RSS

Code:

if ($_REQUEST['type'] == 'JS' AND $vboptions['externaljs'])
{ 
//A BUNCH OF CODE
}
else if ($_REQUEST['type'] == 'XML' AND $vboptions['externalxml'])
{
}
else if (($_REQUEST['type'] == 'RSS' OR $_REQUEST['type'] == 'RSS2') AND $vboptions['externalrss'])
{ 
}

We want to insert that else if block I posted into that structure,
to make it easy... just go to the end of the file, find

Code:

/*======================================================================*\
|| ####################################################################
|| # Downloaded: 22:41, Thu Jan 8th 2004
|| # CVS: $RCSfile: external.php,v $ - $Revision: 1.49 $
|| ####################################################################
\*======================================================================*/

and insert the else if block i posted for external.php right above the big comment block.

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.15484 seconds Memory Usage 2,338KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (8)bbcode_code (5)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!