The Arcive of Official vBulletin Modifications Site.

Forums arranged in columns on forumhome · **Released**: 10-31-2005

As requested several times, this hack allows you to arrange forums on forumhome in xx columns instead of just one per row as it is in standart vb3. It is a plain port of my 3.0 version you can find here.

Look at the screenshot to know what i mean

The design is changeable in the templates of course

I've tested it, and it should work, but as i don't use it myself, i cannot do a longtime test, so if you find any bugs, report them

Right now, it's just working on forumhome.
I'll add changes for forumdisplay later

Smoothie · #**302** 03-24-2007, 02:08 PM

That's because the template edits were too time consuming and I never achieved the look I was after. In it's present state it works, but cosmetically you may not like what you see. That's one of the reasons I gave up on it. When installed, it needs too much work.

I can't specify what you need to do because I did the edits to my liking, which probably wouldn't be to yours. There are a few helpful posts about how to align this and that, but there is no "set in stone" template edits I could tell you about.

satfox360,

Because it's been a while since I had this installed, I'm trying to steer you in the right direction, that's the best I can do. I don't remember the exact edits, nor do I remember the template names

BigJimTheLug · #**303** 03-24-2007, 03:00 PM

Ok, I'm going through this entire thread until I find it and then I will post an approximate way of doing this mod.

Bye.

satfox360 · #**304** 03-26-2007, 04:39 AM

Quote:

Originally Posted by Smoothie

That's because the template edits were too time consuming and I never achieved the look I was after. In it's present state it works, but cosmetically you may not like what you see. That's one of the reasons I gave up on it. When installed, it needs too much work.

I can't specify what you need to do because I did the edits to my liking, which probably wouldn't be to yours. There are a few helpful posts about how to align this and that, but there is no "set in stone" template edits I could tell you about.

satfox360,

Because it's been a while since I had this installed, I'm trying to steer you in the right direction, that's the best I can do. I don't remember the exact edits, nor do I remember the template names

Thanks for the input. I have it working exactly how I like it on ftalife.com and don't want to switch to the new version untill i'm sure it will work. I will test it on another forum and report back in detail later.

Thanks to anyone who can provide any helpful information.

004 · #**305** 04-02-2007, 09:28 PM

Yes, it works on 3.6.5.
Same instructions.

I couldn't get it to work. Tried again & again, but no go.....til i disabled/uninstalled all but vbshout (have since reinstalled all), reverted the "forumhome_forumbit_level1_nopost" template, and started over. In other words....User Error somewhere along the line.

1) Edited new/original functions_forumlist.php
2) Edited forumhome_forumbit_level1_nopost
3) Imported product-xenon_forumcols
4) Set columns in Forum Manager for specific category

Easy Squeazie!!

aceofspades · #**306** 04-13-2007, 04:37 PM

When it says:

Quote:

then add this new function to the file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// ###################### Start construct_forum_columns #######################
function construct_forum_columns($parentid, $columncount)
{
global $vbulletin, $stylevar, $vbphrase, $show;
global $imodcache, $lastpostarray, $counters, $inforum;

// this function takes the constant MAXFORUMDEPTH as its guide for how
// deep to recurse down forum lists. if MAXFORUMDEPTH is not defined,
// it will assume a depth of 2.

if ($columncount == 0)
{..................

What does it mean, am i just meant to put this at the very end of the file or what?

aceofspades · #**307** 04-14-2007, 10:03 AM

On top of this the template edits no longer work with 3.6, they are totally different so this doesnt work with 3.6

BigJimTheLug · #**308** 04-19-2007, 05:14 AM

I couldn't get this to work either.

I could really use something like this.........

Darn it.

BoNeS42 · #**309** 04-20-2007, 02:30 AM

Help me please. I get this error Fatal error: Cannot redeclare construct_forum_columns() (previously declared in /public_html/forum/includes/functions_forumlist.php:192) in /public_html/forum/includes/functions_forumlist.php on line 192

Here's my code. :erm:

PHP Code:


			
<?php

/*======================================================================*\

|| #################################################################### ||

|| # vBulletin 3.6.2 - Licence Number 

|| # ---------------------------------------------------------------- # ||

|| # Copyright ?2000-2006 Jelsoft Enterprises Ltd. All Rights Reserved. ||

|| # This file may not be redistributed in whole or significant part. # ||

|| # ---------------- VBULLETIN IS NOT FREE SOFTWARE ---------------- # ||

|| # http://www.vbulletin.com | http://www.vbulletin.com/license.html # ||

|| #################################################################### ||

\*======================================================================*/



// ###################### Start getimodcache #######################

function cache_moderators($userid = null)

{

    global $vbulletin, $imodcache, $mod;



    $imodcache = array();

    $mod = array();



    $forummoderators = $vbulletin->db->query_read_slave("

        SELECT moderator.*, user.username,

        IF(user.displaygroupid = 0, user.usergroupid, user.displaygroupid) AS displaygroupid, infractiongroupid

        FROM " . TABLE_PREFIX . "moderator AS moderator

        INNER JOIN " . TABLE_PREFIX . "user AS user USING(userid)

        " . ($userid != null ? "WHERE moderator.userid = " . intval($userid) : "") . "

    ");

    while ($moderator = $vbulletin->db->fetch_array($forummoderators))

    {

        fetch_musername($moderator);

        $imodcache["$moderator[forumid]"]["$moderator[userid]"] = $moderator;

        $mod["$moderator[userid]"] = 1;

    }

    $vbulletin->db->free_result($forummoderators);

}



// ###################### Start getlastpostinfo #######################

// this function creates a lastpostinfo array that tells makeforumbit which forum

// each forum should grab its last post info from.

// it also tots up the thread/post totals for each forum. - PERMISSIONS are taken into account.

function fetch_last_post_array()

{

    global $vbulletin, $lastpostarray, $counters;



    $cannotView = array();

    $children = array();



    // loop through the vbulletin->iforumcache

    foreach ($vbulletin->iforumcache AS $moo)

    {

        foreach ($moo AS $forumid)

        {

            $forum = $vbulletin->forumcache["$forumid"];



            // if we have no permission to view the forum's parent

            // set cannotView permissions cache for this forum and continue

            if (!empty($cannotView["$forum[parentid]"]))

            {

                $cannotView["$forumid"] = 1;

            }

            else

            {



                $forumperms = $vbulletin->userinfo['forumpermissions']["$forumid"];



                // if we have no permissions for this forum, set the cannotView permissions cache

                // so that we don't have to check its child forums

                //if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR !($forumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers'])

                if ((!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) AND (($vbulletin->forumcache["$forumid"]['showprivate'] AND $vbulletin->forumcache["$forumid"]['showprivate'] != 3) OR (!$vbulletin->forumcache["$forumid"]['showprivate'] AND $vbulletin->options['showprivateforums'] != 2))) OR ($forum['password'] AND !verify_forum_password($forum['forumid'], $forum['password'], false)))

                {

                    $cannotView["$forumid"] = 1;

                }

                else

                {

                    if (!isset($lastpostarray["$forumid"]))

                    {

                        $lastpostarray["$forumid"] = $forumid;

                    }

                    $parents = explode(',', $forum['parentlist']);

                    foreach ($parents AS $parentid)

                    {

                        // for each parent, set an array entry containing this forum's number of posts & threads

                        $children["$parentid"]["$forumid"] = array('threads' => $forum['threadcount'], 'posts' => $forum['replycount']);



                        if ($parentid == -1 OR !isset($vbulletin->forumcache["$parentid"]))

                        {

                            continue;

                        }



                        // compare the date for the last post info with the last post date

                        // for the parent forum, and if it's greater, set the last post info

                        // array for this forum to point to that forum... (erm..)

                        if ($forum['lastpost'] > $vbulletin->forumcache["$parentid"]['lastpost'])

                        {

                            $lastpostarray["$parentid"] = $forumid;

                            $vbulletin->forumcache["$parentid"]['lastpost'] = $forum['lastpost'];

                        }

                    } // end foreach($parents)

                } // end can view

            } // end can view parent

        }

    }



    $counters = array();

    if (is_array($vbulletin->forumcache))

    {

        foreach($vbulletin->forumcache AS $forum)

        {

            $this_forum =& $counters["$forum[forumid]"];

            $this_forum['threadcount'] = 0;

            $this_forum['replycount'] = 0;

            if (is_array($children["$forum[forumid]"]))

            {

                foreach($children["$forum[forumid]"] AS $id => $info)

                {

                    $this_forum['threadcount'] += $info['threads'];

                    $this_forum['replycount'] += $info['posts'];

                }

            }

        }

    }



}



// ###################### Start makeforumbit #######################

// this function returns the properly-ordered and formatted forum lists for forumhome,

// forumdisplay and usercp. Of course, you could use it elsewhere too..

function construct_forum_bit($parentid, $depth = 0, $subsonly = 0)

{

    global $vbulletin, $stylevar, $vbphrase, $show;

    global $imodcache, $lastpostarray, $counters, $inforum;



    // this function takes the constant MAXFORUMDEPTH as its guide for how

    // deep to recurse down forum lists. if MAXFORUMDEPTH is not defined,

    // it will assume a depth of 2.



    // call fetch_last_post_array() first to get last post info for forums

    if (!is_array($lastpostarray))

    {

        fetch_last_post_array();

    }



    if (empty($vbulletin->iforumcache["$parentid"]))

    {

        return;

    }



    if (!defined('MAXFORUMDEPTH'))

    {

        define('MAXFORUMDEPTH', 1);

    }



    $forumbits = '';

    $depth++;



    foreach ($vbulletin->iforumcache["$parentid"] AS $forumid)

    {

        // grab the appropriate forum from the $vbulletin->forumcache

        $forum = $vbulletin->forumcache["$forumid"];

        $lastpostforum = $vbulletin->forumcache["$lastpostarray[$forumid]"];

        if (!$forum['displayorder'] OR !($forum['options'] & $vbulletin->bf_misc_forumoptions['active']))

        {

            continue;

        }



        $forumperms = $vbulletin->userinfo['forumpermissions']["$forumid"];

        $lastpostforumperms = $vbulletin->userinfo['forumpermissions']["$lastpostarray[$forumid]"];

        if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) AND ($vbulletin->forumcache["$forumid"]['showprivate'] == 1 OR (!$vbulletin->forumcache["$forumid"]['showprivate'] AND !$vbulletin->options['showprivateforums'])))

        { // no permission to view current forum

            continue;

        }



        if ($vbulletin->userinfo['fieldxx'] == 'Yes'  AND THIS_SCRIPT == 'index' AND $forum['subforumcolumns'] != 1 AND ($subsonly OR $depth < MAXFORUMDEPTH))

        {

            $childforumbits = construct_forum_columns($forum['forumid'], $forum['subforumcolumns']);

        }

        else if ($subsonly)

        {

            $childforumbits = construct_forum_bit($forum['forumid'], 1, $subsonly);

        }

        else if ($depth < MAXFORUMDEPTH)

        {

            $childforumbits = construct_forum_bit($forum['forumid'], $depth, $subsonly);

        }

        else

        {

            $childforumbits = '';

        }





// ###################### Start construct_forum_columns ####################### 

function construct_forum_columns($parentid, $columncount) 

{ 

    global $vbulletin, $stylevar, $vbphrase, $show; 

    global $imodcache, $lastpostarray, $counters, $inforum; 



    // this function takes the constant MAXFORUMDEPTH as its guide for how 

    // deep to recurse down forum lists. if MAXFORUMDEPTH is not defined, 

    // it will assume a depth of 2. 



    if ($columncount == 0) 

    { 

        // 0 Columns means don't show subforums at all 

        return ''; 

    } 



    // call fetch_last_post_array() first to get last post info for forums 

    if (!is_array($lastpostarray)) 

    { 

        fetch_last_post_array(); 

    } 



    if (empty($vbulletin->iforumcache["$parentid"])) 

    { 

        return; 

    } 



    if (!defined(MAXFORUMDEPTH)) 

    { 

        define('MAXFORUMDEPTH', 1); 

    } 



    $forumbits = ''; 



    $counter = 0; 

    foreach ($vbulletin->iforumcache["$parentid"] AS $forumid) 

    { 

        // grab the appropriate forum from the $vbulletin->forumcache 

        $forum = $vbulletin->forumcache["$forumid"]; 

        $lastpostforum = $vbulletin->forumcache["$lastpostarray[$forumid]"]; 

        if (!$forum['displayorder'] OR !($forum['options'] & $vbulletin->bf_misc_forumoptions['active'])) 

        { 

            continue; 

        } 



        $forumperms = $vbulletin->userinfo['forumpermissions']["$forumid"]; 

        $lastpostforumperms = $vbulletin->userinfo['forumpermissions']["$lastpostarray[$forumid]"]; 

        if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview']) AND !$vbulletin->options['showprivateforums']) 

        { // no permission to view current forum 

            continue; 

        } 



        if ($subsonly) 

        { 

            $childforumbits = construct_forum_bit($forum['forumid'], 1, $subsonly); 

        } 

        else if ($depth < MAXFORUMDEPTH) 

        { 

            $childforumbits = construct_forum_bit($forum['forumid'], $depth, $subsonly); 

        } 

        else 

        { 

            $childforumbits = ''; 

        } 



        // do stuff if we are not doing subscriptions only, or if we ARE doing subscriptions, 

        // and the forum has a subscribedforumid 

        if (!$subsonly OR ($subsonly AND !empty($forum['subscribeforumid']))) 

        { 



            $GLOBALS['forumshown'] = true; // say that we have shown at least one forum 



            if (($forum['options'] & $vbulletin->bf_misc_forumoptions['cancontainthreads'])) 

            { // get appropriate suffix for template name 

                $tempext = '_post'; 

            } 

            else 



            { 

                $tempext = '_nopost'; 

            } 



            if (!$vbulletin->options['showforumdescription']) 

            { // blank forum description if set to not show 

                $forum['description'] = ''; 

            } 



            // dates & thread title 

            $lastpostinfo = $vbulletin->forumcache["$lastpostarray[$forumid]"]; 



            // compare last post time for this forum with the last post time specified by 

            // the $lastpostarray, and if it's less, use the last post info from the forum 

            // specified by $lastpostarray 

            if ($vbulletin->forumcache["$lastpostarray[$forumid]"]['lastpost'] > 0) 

            { 

                if (!($lastpostforumperms & $vbulletin->bf_ugp_forumpermissions['canview']) OR (!($lastpostforumperms & $vbulletin->bf_ugp_forumpermissions['canviewothers']) AND $lastpostinfo['lastposter'] != $vbulletin->userinfo['username'])) 

                { 

                    $forum['lastpostinfo'] = $vbphrase['private']; 

                } 

                else 

                { 

                    $lastpostinfo['lastpostdate'] = vbdate($vbulletin->options['dateformat'], $lastpostinfo['lastpost'], 1); 

                    $lastpostinfo['lastposttime'] = vbdate($vbulletin->options['timeformat'], $lastpostinfo['lastpost']); 

                    $lastpostinfo['trimthread'] = fetch_trimmed_title($lastpostinfo['lastthread']); 



                    if ($icon = fetch_iconinfo($lastpostinfo['lasticonid'])) 

                    { 

                        $show['icon'] = true; 

                    } 

                    else 

                    { 

                        $show['icon'] = false; 

                    } 



                    $show['lastpostinfo'] = (!$lastpostforum['password'] OR verify_forum_password($lastpostforum['forumid'], $lastpostforum['password'], false)); 



                    eval('$forum[\'lastpostinfo\'] = "' . fetch_template('forumhome_lastpostby') . '";'); 

                } 

            } 

            else if (!($forumperms & $vbulletin->bf_ugp_forumpermissions['canview'])) 

            { 

                $forum['lastpostinfo'] = $vbphrase['private']; 

            } 

            else 

            { 

                $forum['lastpostinfo'] = $vbphrase['never']; 

            } 



            // do light bulb 

            $forum['statusicon'] = fetch_forum_lightbulb($forumid, $lastpostinfo, $forum); 

             

$show['customstatusicon'] = false; 

if ($forum['hasstatusicons']) 

{ 

    $show['customstatusicon'] = true; 

    if ($forum['statusicon'] == 'new') 

    { 

        $forum['customicon'] = $forum['statusiconon']; 

    } 

    if ($forum['statusicon'] == 'new_lock') 

    { 

        $forum['customicon'] = $forum['statusiconlockon']; 

    } 

    if ($forum['statusicon'] == 'old') 

    { 

        $forum['customicon'] = $forum['statusiconoff']; 

    } 

    if ($forum['statusicon'] == 'old_lock') 

    { 

        $forum['customicon'] = $forum['statusiconlockoff']; 

    } 

    if ($forum['statusicon'] == 'link') 

    { 

        $forum['customicon'] = $forum['statusiconlink']; 

    } 

} 



            // add lock to lightbulb if necessary 

            if ((!($forumperms & $vbulletin->bf_ugp_forumpermissions['canpostnew']) OR !($forum['options'] & $vbulletin->bf_misc_forumoptions['allowposting'])) AND $vbulletin->options['showlocks'] AND !$forum['link']) 

            { 

                $forum['statusicon'] .= '_lock'; 

            } 



            // get counters from the counters cache ( prepared by fetch_last_post_array() ) 

            $forum['threadcount'] = $counters["$forum[forumid]"]['threadcount']; 

            $forum['replycount'] = $counters["$forum[forumid]"]['replycount']; 



            // get moderators ( this is why we needed cache_moderators() ) 

            if ($vbulletin->options['showmoderatorcolumn']) 

            { 

                $showmods = array(); 

                $listexploded = explode(',', $forum['parentlist']); 

                foreach ($listexploded AS $parentforumid) 

                { 

                    if (!isset($imodcache["$parentforumid"])) 

                    { 

                        continue; 

                    } 

                    foreach($imodcache["$parentforumid"] AS $moderator) 

                    { 

                        if (isset($showmods["$moderator[userid]"])) 

                        { 

                            continue; 

                        } 



                        ($hook = vBulletinHook::fetch_hook('forumbit_moderator')) ? eval($hook) : false; 



                        $showmods["$moderator[userid]"] = true; 

                        if (!isset($forum['moderators'])) 

                        { 

                            eval('$forum[\'moderators\'] = "' . fetch_template('forumhome_moderator') . '";'); 

                        } 

                        else 

                        { 

                            eval('$forum[\'moderators\'] .= ", ' . fetch_template('forumhome_moderator') . '";'); 

                        } 

                    } 

                } 

                if (!isset($forum['moderators'])) 

                { 

                    $forum['moderators'] = ''; 

                } 

            } 



            if ($forum['link']) 

            { 

                $forum['replycount'] = '-'; 

                $forum['threadcount'] = '-'; 

                $forum['lastpostinfo'] = '-'; 

            } 

            else 

            { 

                $forum['replycount'] = vb_number_format($forum['replycount']); 

                $forum['threadcount'] = vb_number_format($forum['threadcount']); 

            } 



            if (($subsonly OR $depth == MAXFORUMDEPTH) AND $vbulletin->options['subforumdepth'] > 0) 

            { 

                $forum['subforums'] = construct_subforum_bit($forumid, ($forum['options'] & $vbulletin->bf_misc_forumoptions['cancontainthreads'] ) ); 

            } 

            else 

            { 

                $forum['subforums'] = ''; 

            } 



            $children = explode(',', $forum['childlist']); 

            foreach($children AS $childid) 

            { 

                $forum['browsers'] += ($inforum["$childid"] ? $inforum["$childid"] : 0); 

            } 



            if ($depth == 1 AND $tempext == '_nopost') 

            { 

                global $vbcollapse; 

                $collapseobj_forumid =& $vbcollapse["collapseobj_forumbit_$forumid"]; 

                $collapseimg_forumid =& $vbcollapse["collapseimg_forumbit_$forumid"]; 

                $show['collapsebutton'] = true; 

            } 

            else 

            { 

                $show['collapsebutton'] = false; 

            } 



            $show['forumsubscription'] = ($subsonly ? true : false); 

            $show['forumdescription'] = ($forum['description'] != '' ? true : false); 

            $show['subforums'] = ($forum['subforums'] != '' ? true : false); 

            $show['browsers'] = ($vbulletin->options['displayloggedin'] AND !$forum['link'] AND $forum['browsers'] ? true : false); 



            // build the template for the current forum 

            $column_width = intval(100 / $columncount) . '%'; 

            eval('$column = "' . fetch_template("forumhome_forumbit_columncell") . '";'); 

             

            // do the columnstuff 

            if ($counter % $columncount == 0) 

            { 

                // Begin a new row 

                $forumbits .= "\t<tr>\n"; 

            } 

            $forumbits .= $column; 

            if ($counter % $columncount == $columncount - 1) 

            { 

                // End row 

                $forumbits .= "\t</tr>\n"; 

            } 

            $counter++; 

        } 

    } 



    // prevent unclosed <tr> tags 

    if ($counter % $columncount != 0) 

    { 

        $forumbits .= "\t</tr>\n"; 

    } 

     

    return $forumbits; 

}

aceofspades · #**310** 04-29-2007, 04:57 PM

It doesnt work for 3.6 dont bother trying it.

category · #**311** 04-30-2007, 01:57 AM

It does work on the latest 3.6.5
http://www.drillerdeals.com/forum/ example

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.06155 seconds Memory Usage 2,530KB Queries Executed 25 (?)
More Information
Template Usage: (1)SHOWTHREAD (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (1)ad_showthread_beforeqr (1)bbcode_php (2)bbcode_quote (1)footer (1)forumjump (1)forumrules (1)gobutton (1)header (1)headinclude (1)modsystem_post (1)navbar (6)navbar_link (120)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (2)pagenav_pagelinkrel (11)post_thanks_box (11)post_thanks_button (1)post_thanks_javascript (1)post_thanks_navbar_search (11)post_thanks_postbit_info (10)postbit (11)postbit_onlinestatus (11)postbit_wrapper (1)spacer_close (1)spacer_open (1)tagbit_wrapper Phrase Groups Available: global inlinemod postbit posting reputationlevel showthread	Included Files: ./showthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/functions_bigthree.php ./includes/class_postbit.php ./includes/class_bbcode.php ./includes/functions_reputation.php ./includes/functions_post_thanks.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete showthread_start showthread_getinfo forumjump showthread_post_start showthread_query_postids showthread_query bbcode_fetch_tags bbcode_create showthread_postbit_create postbit_factory postbit_display_start post_thanks_function_post_thanks_off_start post_thanks_function_post_thanks_off_end post_thanks_function_fetch_thanks_start post_thanks_function_fetch_thanks_end post_thanks_function_thanked_already_start post_thanks_function_thanked_already_end fetch_musername postbit_imicons bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete postbit_display_complete post_thanks_function_can_thank_this_post_start pagenav_page pagenav_complete tag_fetchbit_complete forumrules navbits navbits_complete showthread_complete
Messages:

The Arcive of Official vBulletin Modifications Site.

It is not a VB3 engine, just a parsed copy!