vb.org Archive
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.5 Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=113)
-   -   Put a Column on the RIGHT side of every forum page (https://vborg.vbsupport.ru/showthread.php?t=94495)

amykhar 08-16-2005 10:00 PM
Put a Column on the RIGHT side of every forum page
 
Rather than clutter up the left column thread with this second product and confuse the issue further, I have made a separate product for those of you who want a column on the right side instead.

This can easily be combined with the left column product to have a column on both sides.

To use this with the left column product, change the header code to:
Code:
<!-- Left Column Code  -->
<table border="0" width="$stylevar[outertablewidth]" cellpadding="0" cellspacing="0" align="center">
<tr>
<td width="160" valign="top" align="left">$leftcolumn</td>
<td valign="top">
<table width="100%" cellpadding="0" cellspacing="0" border="0">
<tr>
<td valign="top">
<!-- End Left Column Code -->

sabret00the 08-17-2005 03:03 PM
find:
HTML Code:
<!-- Left Column Code  -->
and replace with
HTML Code:
<!-- Right Column Code  -->
:p







Great work, thanks for sharing.

amykhar 08-17-2005 03:11 PM
doh :blush:

jugo 08-17-2005 04:55 PM
Would it not be simplet to just create a template modification on the header and footer and leave it at that?

amykhar 08-17-2005 05:29 PM
In some ways, yes. But, this creates a separate template for the menu contents which makes it easier to maintain for some. The header template can get full with ad banners and other things.

For some novice users, this is an easier method.

jugo 08-17-2005 07:08 PM
Quote:
Originally Posted by amykhar
In some ways, yes. But, this creates a separate template for the menu contents which makes it easier to maintain for some. The header template can get full with ad banners and other things.

For some novice users, this is an easier method.

Good point. Thanks.

WoodiE 08-18-2005 07:52 PM
Is there a way to make this ONLY show in the forumhome and not in every forum page?

-Michael

amykhar 08-18-2005 08:10 PM
Yes. Look in the left page hack. There is the syntax to make it not show on the portal page. Change that to make it ONLY show on the forumhome.

Wordplay 08-25-2005 05:14 AM
is it possible to include just templates in here?

amykhar 08-25-2005 12:47 PM
Not sure what you are asking.

ohgenki 08-26-2005 05:40 AM
i have a problem, when i browse threads that have attachments in them (i have thumbnails enabled) the page will be resized into my whole screen's resolution, thereby resulting in a horizontal scroll bar at the bottom needing me to scroll to the right to see the right panel.

i don't have this problem when i browse categories or threads that have no attachments, i checked the attachment templates, they didn't specify a size, weird...anyway to solve this ?

amykhar 08-26-2005 12:00 PM
ohgenki, I find it impossible to debug issues like this for users who don't display their forums in your member profile here. I can't recreate the problem on my site and I can't see your site; so without seeing your full style in action I am unable to help you.

Amy

ohgenki 08-26-2005 01:08 PM
alright, this is an example:

http://www.ohgenki.com/forums/showth...t=50923&page=4

the scroll bar at the bottom is only present when viewing threads that contains attachments. also, this problem lies only with the right panel, if i put the panel to the left, it has no such problems.

screen shot:

amykhar 08-26-2005 01:14 PM
Can't view the thread because login is required. Can't see the whole page in the screenshot, nor can I view the source to see what might be going on. Try it on a test board with the default style and see if you have the same problem. If not, you're probably going to have to do some page validation work and tinkering with your style to get things aligned as you want them.

Wordplay 09-08-2005 12:46 PM
Quote:
Originally Posted by amykhar
Not sure what you are asking.
i mean is it possible to show what's in a template in that column? i'm trying to get your who's online avatars hack to show up in that column, without all the info, just showing the avatar and linking to that user's profile. can you please help me with this?

amykhar 09-08-2005 12:53 PM
I'm sorry, I don't have time to help people get dynamic data into the columns at this time. Each kind of dynamic data is essentially it's own modification.

Emil 09-17-2005 11:36 AM
I really like this right column thing and I find it to be very useful and I really want to use it on my board.. But there's one thing I have to fix before I can use it..

It's working good on all pages except for on the view thread pages.. For some reason it contracts the thread part. View the attached screenshot to understand what I mean..

Is there any way I can fix this? Thanks

Roxie 09-17-2005 09:17 PM
Quote:
Originally Posted by Emil
I really like this right column thing and I find it to be very useful and I really want to use it on my board.. But there's one thing I have to fix before I can use it..

It's working good on all pages except for on the view thread pages.. For some reason it contracts the thread part. View the attached screenshot to understand what I mean..

Is there any way I can fix this? Thanks
I have a similar problem. Mine seems to expand the header when viewing thread, making the sidebar very tiny.

Cheertobi 09-23-2005 06:46 PM
Hi,

Quote:
Originally Posted by Roxie
I have a similar problem. Mine seems to expand the header when viewing thread, making the sidebar very tiny.
is there a solution for this problem right now?!

Regards,

Tobi

thetoolman 09-23-2005 07:12 PM
i had the same problem. i had to remove all the spacer_close and spacer_open tagsd from all the templates... then it works.

Roxie 09-25-2005 10:19 PM
Quote:
Originally Posted by thetoolman
i had the same problem. i had to remove all the spacer_close and spacer_open tagsd from all the templates... then it works.
From what templates?

thetoolman 09-26-2005 03:56 PM
from all templates

jugo 09-28-2005 05:16 PM
There seems to be an issue with this and the spacer Tempates...

I'm sure it's simple html...BUT it's not working correctly.

I am using all DEFAULT TEMPLATES except for the header, but the only change in the header is my images.

So there IS a problem with this and the spcer templates.

Bellinis 09-28-2005 09:09 PM
I think this is the plugin I was looking for... :rolleyes:

Can I use this to show a Google adsense skyscraper on the right side of my forum? My forum uses a fixed width.

Roxie 09-28-2005 09:30 PM
Quote:
Originally Posted by thetoolman
from all templates
I'm not sure I understand. From every single template??

thetoolman 09-29-2005 03:45 PM
yes thats what i did and it worked for me.

jugo 10-07-2005 03:02 PM
why not just edit the two templates and clear them out ...that way you just edit two templates and leave the rest.

HawKe 10-11-2005 12:13 AM
I added this right-side column code (thanks so much, by the way) and noticed an odd behavior on the posts which begin underneath the header bar that contains the "thread tools, search this thread, rate thread... etc" drop-downs.

In the attached pic you'll see that the width of the posts are a bit thinner than the normal area - and it looks odd. This happened after adding the code for the right column.

Has anyone else seen this and does anyone have any suggestions on how to remedy it? I'd like to "unsquish" my posts so the forum looks correct again.

PS. This does not show up on the main forum page, just the Showthread areas when you are viewing posts.

Forum is at: http://forums.audioholics.com/forums

Thug 10-20-2005 12:36 AM
can u clearly explain how to add this just to forumhome like
www.dholaholic.com/forum has that

Tony89 10-22-2005 06:29 PM
How can i replace the black name & add my content inside the block?

Lee Wisener 10-23-2005 10:40 PM
Quote:
Originally Posted by Tony89
How can i replace the black name & add my content inside the block?
Just search for the template called "left_column"

You can then make changes in there.

Roxie 10-23-2005 10:41 PM
Quote:
Originally Posted by HawKe
I added this right-side column code (thanks so much, by the way) and noticed an odd behavior on the posts which begin underneath the header bar that contains the "thread tools, search this thread, rate thread... etc" drop-downs.

In the attached pic you'll see that the width of the posts are a bit thinner than the normal area - and it looks odd. This happened after adding the code for the right column.

Has anyone else seen this and does anyone have any suggestions on how to remedy it? I'd like to "unsquish" my posts so the forum looks correct again.

PS. This does not show up on the main forum page, just the Showthread areas when you are viewing posts.

Forum is at: http://forums.audioholics.com/forums
I still haven't figured out how to get rid of that problem.

Lee Wisener 10-23-2005 10:43 PM
fiarly global problem, I have not found a solution yet either!

Lee Wisener 10-23-2005 10:47 PM
What I have done is set the spacer size to 5px more as a visual effect on my forum, now the problem of the narrowing posts has at least nearly disappeared.

http://www.scrapnames.com

TitanJeff 10-24-2005 10:10 PM
I'm looking for a solution as well as to how to get my margins aligned. Anyone know?

TitanJeff 10-24-2005 10:19 PM
Quote:
Originally Posted by Lee Wisener
What I have done is set the spacer size to 5px more as a visual effect on my forum, now the problem of the narrowing posts has at least nearly disappeared.

http://www.scrapnames.com
For the noob, what table(s) are we taking about modifying the spacer bar for? Can someone be as specific as possible to help out cause? :)

Thanks!

Allan 10-25-2005 06:30 AM
is it possible just on forumhome ?

yinyang 10-25-2005 03:04 PM
Quote:
Originally Posted by Allan
is it possible just on forumhome ?
yup.

just follow the instructions, but instead of inserting after header, insert after (or before depending on your style) $header on forumhome template. and instead of inserting into $footer, insert right before $footer on forumhome template.

hope that helps!

Allan 10-25-2005 06:25 PM
Thanks Yinyang ;)

Parture 10-26-2005 06:24 PM
<a href="http://biblocality.com/forums/index.php" target="_blank">http://biblocality.com/forums/index.php</a>

I put the code in forumhome. But there is still a problem on the forumhome page.

1) The spacing is not quite right down the right side. I would not like the right column to squish up against up against the other tables with the screen width is shrunk using the favorites side by in any browser window.

2) Also notice the column on the right side spacing is wider than the left side spacing.


All times are GMT. The time now is 11:52 AM.
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.02156 seconds
  • Memory Usage 1,817KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (1)bbcode_code_printable
  • (2)bbcode_html_printable
  • (10)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (2)pagenav_pagelink
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete