![]() |
Modification System
What is it ?
You see the way vBulletin create a Post for a Modification. You like it ? With this AddOn you can do it also. It's not for everyone, but ... try it out if you like. What does it do ? Simular the same as here on vBorg. But I mixed it with vBGo. Contents
Mod-System is very easy to use. After installing and setting the Userrights go to the Settings and choose one or more forums as a Mod-Forum. Now each "new Thread" will shown as here on vBorg. You can donate the Author, Mark as Installed/Uninstalled, Tag the Mod, Send Updates automatically or manually or nominate for MOTM. MOTM is also avaible and works full automatically ! What's different between vBorg and vBGo On vBGo you see the Categories (those are the Prefixes) - more later. There is a ProfileTab for your Modifications and some other different things. On vBGo you can have a "user defined" Licence. I will let the Admin to create more, so the Author can choose from different Licences. Permissions
If enabled and the permission is given, each User can set his options into the UserCP. Currency, Amount and PayPal-Email-Address. Donation is then only avaible in Mods, when the Email-Address exists. Licence/s A "user defined" Licence can also create in the UserCP (if enabled and the permission is given). Each User can create only one "user defined" licence. If the Admin create more, the Author of a Mod can choose one Licence from all of it for his Modification. Modification of the Month Works also very simple. Each month, a User can nominate Mods as he like during the month. At the end of month, the best nominated Mods are taken for the MOTM-Poll. There must be a minimum of 2 Mod for the poll, otherwise no poll is created. Ok, now you have 30 days (or if a new month starts earlier - like February - the poll is closed automatically) to vote for a Mod. The best Mod will become MOTM. A MOTM can't nominate again. Update Notification "Send Update" only appears, if a User set to "manual notification". If the Author clicks on it, ALL Users will inform about the Update (if he has clicked the Installed-Button before). A automatically notification will only send, if the Author change the Mod-Version to a higher one. Prefix There is no need for Prefixes. But if you create you own Prefixes for the Mod-Forums, the Auhtor can choose it and it will shown as a Category in the Post. NOTE I didn't get the permission to use the Images from here (vBorg). So I've created some own. Change them if you like. For Support just click: Installed For more Install-Informations take a look at the READ.ME [EDIT] v1.1 Security-Fix: change the modsystem_miscactions.php and the clientscript/modsystem_miscactions.js v1.1 PL1 ProfileTab fixed (update includes/class_profile....) v1.1 PL2 Fixed, the datestamp, print, subscribe eg. v1.2 fixed some small things and the template for guests v1.3 fixed a lot. Templates view, AJAX ... (simply overwrite all files and the product) v1.3 PL 2 THIS UPGRADE IS A MUST HAVE. Fixed some Securitybugs. v1.4 Nothing special, but the admin can now edit the post of the author v2.0
fixed a bug with at the forumsdisplay (thread isn't classed as a Mod-forum) "double thread view". this happends, if a mod has more than one attachment do download. To fix this problem, go into AdminCP - Mod-System - Update Counter - "Adjust Threads". added the usergrouppermission "can use it" v2.4 fixed: the Statistics (shows installs instead of mods) - pls, update counters fixed: sorting by installs (I disable the plugin) added: versionscheck. Upload modsystem_versioncheck.php into your root. You can add the following link into your own mods: http://www.YOURWEBSIDE.???/modsystem_versioncheck.php?product=xxx where xxx is the productid added: Donload Logs. You can disable it in the Options added: "similar mods" (works as a beta). You will found the modules in the "extra" folder. You need to upload the PHP in the "includes" folder, too. All modules are XML - simply import the XML with vBCMS or CMPS and make your settings. A module is only present, when MOD-System is online and contents for the module is avaible. 本插件已经被vbulletin中文org平台收录 P.S. deutschen Support gibt es auch bei your-vb |
more pictures
|
v2.0
Pls, take a look at the READ.ME. There are a few new entries for manual Templateedits. With this version comes a "new" forum statistic only for modifications. If this statistic is not shown in your style, pls check out the TEMPLATE-HOOK called: forumhome_wgo_pos5 in template: FORUMHOME. By installing the product (you need to upload the files first - or overwrite existsting), some settings will delete and generate again. This is nessesary, 'cause there could be an error message. Maybe the browser will refresh twice - that's correct and means, that the options are generated. Go into the MOD-System settings and check 'em out. You'll found a handfull new options like: MOD forums or Style forums. With this, you can now split your general MOD forums into 2 parts (like here on vBorg). Another one is the USERTITLE option. With the installation, I've created some Coder/Designer Levels based on the installcount of all the Users MODs. I'll give you a small example: User XYZ has 5 Installs - 2 Installs for a Code Mod and 3 for a Style Mod. His usertitle is called: "happy User" and now ... back to the option: "Replace" or "Add". With 1 install for a Mod, the user gets a new "MOD usertitle" - if you choose "Add" his new usertitle is called: happy User/Coder/Designer and by "Replace" Coder/Designer. The last two Options Leave them as they are !!! Both options will change by SCHEDULED TASK. If you really want to try, do it in your Testforum. Here also a little explaination: You've created some Mods - wow - *g. Ok, try to nominate a mutch a you like (a minimum of 2 MODs is required). Enter AdminCP and set "start MOTM" to YES. Back in forum, refresh your browser or click anywhere to refresh your forums. If anything goes right, a new thread is create. You have nominated more than 2 mods - there will be also a poll. If not, the thread only sayed, that there wasn't enough nominations. Ok, we have a poll. Simply vote for a Mod (example with 3 polloptions) Mod AAA = 0 votes Mod BBB = 1 votes Mod CCC = 0 votes Now, nominate again ... nominate also the Mod BBB :) In AdminCP set "start MOTM" to YES again. Back in forum refresh again and ... ... anything goes right, again ... Mod BBB is now MOTM and can't nominate again. A new thread is also created with a poll but ... the Mod BBB isn't in there ! Coder/ Designer Level: With this, you can create Levels based by installcount of Mods. I've create 9 Levels for each. Release Level 1 ... 9. Each Level has a min. and a max. count. Level 1 = 1 - 50 Level 2 = 51 - 100 ... ... Level 9 = 401 - 0 The lowest Level MUST begin with 1 and the highest MUST end with 0. Make sure, that there is no overlap ! Update Counters: There are only 4 options. The first one - is to create missing settings (the "extra" folder from v1.4 doesn't exists any longer). You can now create this in the AdminCP. The next three options, are for the datastore. Usertitle, Mod statistics needs NO queries. If you think, that something goes wrong with the counters, try to cache them first. Forum Mod Statistic: Will only shown, if a minimum of 1 installs is set to any user. Top Coders: only the best top 5 will shown (there is also a min. of 1 install require) Top Designers: see Top Coders (the count in () after the username shows his installcount) Top MOTM: only avaible if there is a MOTM (the count in () after the username shows his MOTM count) Code MODs, Style MODs, Coders and Designers: If avaible, you can click on it (same as here on vBorg, but ... Code MODs and Style Mods will show the threads). UserCP: Here you will found 4 new Options:
A big THX goes to @Hasann for testing, reporting, ideas and help with this AddOn. |
sweet mod man ;) i cant use it on a chat site, but looks great man good job.
|
Nice! Only the profile part missing :-)
edit: I did not see it. Nice work |
well.. this looks cool, will test it out ! thanks.
|
its seems to a good job , have to give it a try
brb |
Quote:
|
wow thank you man look very nice... I installed ;)
|
Quote:
|
Thanks for this super hack ;)
Good job ;) |
Wow I have no use for it but look like one of the best hack release here .
thanks for share Hate to see people rating a hack low with out even try it . |
Nice Coroner,
thank you very much. :) My wish is to have an another option: if I start a new thread, to enter one or more co-authors which can edit the post, add attachment to the posts etc. also. Example (sorry, german only): Attachment 87148 Or a standalone addon ;) Regards, Stoebi |
I tried to make it "originality". Is it so - here on vBorg or vBGo ?
@Stoebi: I'll give Support also on vBGo. Maybe it's easylier for someone to give hints or questions in german. |
Quote:
You'll find this on vbg.org (make a new thread in the add-ons section) :) Regards, Stoebi |
Nice!
|
Ok, just now, I Know what you mean.
After creating the Thread-Post (I seperate the Settings from the Post - like here on vBorg), the next page will show you the Settings of your Mod. Al lot of more as on vBGo and here you can enter Supporters/CoAuthors - but they don't have permission to change the Mod and attachments. |
where do i add the Stylevars????
i dunno where to add i go Stylevars each styles dun know where to add... |
sweet was waitin for this but could never find it.
Bit late now but im gonna install it on a test forum an have a mess around with it. Thanks for sharing. |
Quote:
|
Below The Line Or Starting Line???
i see Additional CSS Definitions There are two box add on which one and where to add ??? |
Quote:
|
Quote:
|
great mod .... *installed*
|
Do I Add To The Botton Or Overwrite it????
But Add To The Botton Box Better or upper box better??? And How To Add A Field Numbers???? |
Quote:
Fieldnumber (there is no must have): Add a new Profilefield for the vBVersion (single-line). After creating it, you can see the fieldnumber. Enter those number as the value in the Mod-Settings |
how to create field setting....
|
When uninstall the modification topics to return to normal?
without any problems SQL? |
Profilefields - Add new profilefield
I think you need to take a look into the vBulletin documentation *g |
When someone click "Mark as installed"
modsystem_miscactions.php?do=uninstallmod&threadid =10410 gives uninstall -1 dont compatible with postib_legacy :( |
Mark as installed following to link
modsystem_miscactions.php?do=uninstallmod&threadid =10410 Mark as uninstalled to: modsystem_miscactions.php?do=installmod&threadid=1 0410 And add "One user can click one installed" anty flood. |
super add-on aber klabt nicht bei Version 3.7.3 patch 1
|
Quote:
Can you please explain a little bit better. |
Quote:
|
Quote:
Uninstall leads to install and vice versa. |
Quote:
da ist install button Anstatt uninstall button und die Ajax funktioniert nicht bei Showthread und die Mitgliedern haben im ihr Profile die gleichen Modifikationen :D |
hi.
nice mod . just dont understand about this option . Instruction Part 2 - Stylevars where should i added this code in stylvars? a little explain please. Thank u |
<a href="https://vborg.vbsupport.ru/showpost.php?p=1626825&postcount=20" target="_blank">https://vborg.vbsupport.ru/showp...5&postcount=20</a>
|
Quote:
|
Quote:
Have a question buddy Can you give me the permission for further development ? |
All times are GMT. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.
X vBulletin 3.8.12 by vBS Debug Information | |
---|---|
|
|
![]() |
|
Template Usage:
Phrase Groups Available:
|
Included Files:
Hooks Called:
|