Who has read a Thread
 

This displays who has read a thread, and the time they last looked at it.

Hovering over a name will show when the member last viewed the thread, and (optionally) what IP address they viewed it from (Note: as of v3.34 you can only view the ip addresses in the 'View-All' display).

There is now an option to allow a thread author to view who has read their thread when they are not in one of the allowed usergroups. The IP and number of days restrictions still apply.

A new time set/reset facility has been added. Members allowed to use this facility can click on the 'set' link and it will set a personal 'cutoff' time - only showing who has read the thread after that time. The time can be reset as many times as you want, and also completely cleared again. When using this facility there is also a link to allow you to view a seperate list of all readers of the thread.

A cron job has now been added that can (optionally) delete records from the whoread table that are over a certain age - this is provided for large forums where the number of table entries can start to reach a million or more after 12 months. The delete age is a setting in the ACP.

Warning: When using the set/reset option - there is only a limited capacity of entries per thread (several thousand) - therefore you should only allow this feature to be used by a limited number of people - typically Staff usergroups. Allowing all members to use it will probably slow down your forum and cause errors if more than about 3000 members set a date on one thread.


There are settings for the following (in vBulletin Options > Who Has Read a Thread) ;

1. Turn the system on/off.
2. Restrict the display to certain usergroups
3. Restrict the IP display to certain usergroups.
4. Restrict the display to a set number of days.

New in v3.28

5. Option to allow thread author to view who read information.
6. Option to turn on the who read cutoff date (reset) function
7. Restrict use of reset function to certain usergroups.
8. Option to set whoread data records to be cleaned out after xxx days.

New in v3.39

9. Clicking on a user will display a page of their thread viewing history, most recent first.


Note: When using option 4 or the set/reset facility, the data is still kept beyond this limit, so they can be changed at any time.

Download the zip, extract the XML file and import using the vb Product Manager.


History:

v3.20 : First Release for vb 3.6, a few code changes.
v3.21 : Dependancies updated for 3.6.0 Gold.
v3.22 : Updated for Version Checking.
v3.23 : Internal Development version.
v3.24 : Internal Development version.
v3.25 : Internal Development version.
v3.26 : Internal Development version.
v3.27 : Private release.
v3.28 : Public release of new features.
v3.29 : Fixed bug in clean-up, the setting was hours, not days.
v3.30 : Added options to disable/change auto template insert (not released).
v3.31 : Internal Code Changes, Settings Group renamed.
v3.32 : Minor template change.
v3.33 : SQL Changes to use slave.
v3.34 : Added new template for username display code, made 'View-All' always available.
v3.35 : Added last post marker to 'View-All' display.
v3.36 : Fix uncached templates.
v3.37 : Fixed missing date/time display when 'set' function is used.
v3.38 : Moved auto-template options to mods main settings group.
v3.39 : Version infomation added, display of user thread reading activity added.
v3.40 : Bugfix : Correct bugs reported in posts #308 & #318.
v3.41 : Minor changes to install code only.

installed .. :)

I installed this https://vborg.vbsupport.ru/showthread.php?t=91409

will your hack work with the old data?

Installed! thanks!

Thanks!

phat mod *installed*

Installed,

but there are no options in the vB options page for this hack!

They are in in vBulletin Options - Thread Display Options.

Paul M Installed . thanks :)

lnstalled ty

This is the first Product I've tried to D/L & Install, so bare with me here...

I D/L'd the file, unzipped it, uploaded it via the Product Manager and it all seemed to work just fine.

However, when I logged into my vBulletin Forum (v3.6.0) I didn't see any difference. So I went back and reviewed the Thread Display Options and noticed you needed to be in groups 5,6,7 to see the effect. I added a trailing 2 to that list, saved it, then went and logged in as a registered user just to see what it looked like. Still no difference. Lastly, I removed the trailing 2, then went and logged in as Admin to see it. Still no difference.

What am I doing wrong, or what have I failed to do?

Thanxx.

Maybe I'm just misunderstanding what it is supposed to do.

Do you mean when your cursor 'hovers' over a name that the info should pop up so you can see it?

Or do you mean, 'hovering' above the name in a banner you should see this?

Here's what my screen looks like logged in as Admin and as a Normal Registered user viewing a post by adwt.
(Note: The upper right hand corner of the pics.)

I assume you have it turned on ?

There are no pictures in your post, a link to your forum would help.

Yes, I've got the Radio Button toggled to Yes alright.

I attached 2 .GIF files and they show up as thumbnails beneath my post.

Anyway, here's a LINK to my forums at:

http://www.rocketriding.org/forums/index.php

The attachments are there now, but they seem to be pictures of specific posts, this is a thread display, it appears at the bottom of the thread (under Quick Reply, above the posting rules).

Sorry-so-stupid, it's working. I scrolled down the page to where you said and here's what I saw! (attached screen print)

Many Thanxx for your help!

NM, glad its okay. :)

I would only want this hack enabled for the original poster. It doesn't look like that option is available. Oh well.

Nope there is no such option. Interesting idea though, I'll keep it in mind.

Great Hack, thank you.

How can I put the hack above the thread? Is it possible?

Brilliant hack and veeeeery easy to install, thanks!

I was wondering the same thing.

Can this be enabled only in certain forums?

No, there is no option to restrict it to certain forums.

Is it possible to make it compatible with 3.6.0 Beta 1? It gives the message it is nt compatible. Thankyou for your help.

No it isn't.

No forum should be running Beta Software, if you're on 3.6 then you should upgrade to the full release version.

I hate it when hacks do template changes themselves. I have to change the code to make it look good to me. :(

Sorry, Paul... this mod killed my forum... this doesn't work for large forums I think... he had topics with 2000 users in 24 hours... I uninstalled and everything worked fine...

Define "killed".

I haven't tried 2000 members, but our live forum has threads where 500/600 members have read them, and it doesn't even blink. Mind you, I think a list of 2000 members would look a bit overpowering in a thread anyway.

"Killed" the conection... I put it and every was fine... of course, every page started with cero... 24 hours later, many pages had 1500, 2000 (Silent Hill release, for example) and more... so the conection went down gradually... at last, I uninstalled this and everything return to normally.
But I liked this mod... maybe if someone figures how solve this, I'll install it again.
Thanks anyway, man. And sorry for my english.

thanks

Installed... thanks

....

I noticed that "Who has read a Thread" will be displayed only in the default style.

Which code should I add in the others ?

thanks,
mike

Do you have customised styles then ?

Hello Paul,

Nice hack thank you! :)

Could you please add an option to allow us to use this add-on on what forums?

For example, I need this add-on to work in my Moderators forum only. ;)

yes, Paul. I use vbulletin 3.6

the "Display_Readers" template was installed in the style where I missed the
"Who has read a Thread".

take a look, please.

thanks,
mike

Another of my favourites.. Thanks Paul :D

Your custom styles are suffering this old 'bug' ;

http://www.vbulletin.com/forum/bugs3...iew&bugid=1280

You need to change the comment at the end of the active users section.

YEAH, master. that was ;)

thanks,
mike

installed, thank you :)