Oh, gotcha. In my postbit templates I am using total not pcnt.

In the postbit code you added, change itrader_total to itrader_pcnt.


Hrm, you know what, It looks like I've got a few trades that aren't showing up either in my profile. I'll have to look around and see why.

Hi,
Mod has been installed and seems to be working fine. However, I have a questions.

In the VB Options in the AdminCP, there is an area called "iTrader Settings" One of the options is called "Contact Staff On Negative Rating?" If set to yes, this will send an email to iTrader Admins when a user receives a negative rating. Where do I identify the iTrader Admin or Admins?

Thanks

In your Usergroup Permissions.

DJ,
The only usergroup permissions that I can locate in the administrators usergroup that has anything to do with iTrader are:

- Can View Ratings
- Can Rate Other Users
- Can Administrate Ratings

I don't see anything about the admins receiving email notifications on negitive feedback, or where I can add the iTrader admins email address.

Thanks!

You don't set the addresses, you set the Administrators. Then the administrators receive the email if you have that option turned on the iTrader settings.

Hi DJ, had you any luck figuring this problem? I looked for anything all weekend, but I'm limited to what I can do "coding" wise. I tested everything I could.....adding code/removing code/moving code around.

I got nuttin

I don't know... I have a usergroup called administrators, and I have one primary and one additional user in this group. So as far as I can tell this is setup. However, neither have received an email when negitive feedback is set.

Does anyone else have this working?

there is a way to integrate or to use the vBay links

So far no, but I've been busy quite a bit since I posted that. I'm hoping to look into it a little later.


Did you set the Administrator Usergroup to be iTrader admins?

Thank you, I'm just glad you're looking into it. I'll keep an eye out here. Thanks.

I guess I haven't, where is this done? I haven't found any reference to this in the instructions, am I missing something?

That's what - Can Administrate Ratings is for. ;)

If that's the case, then I have that set for the administrators in their usergroup, however, it's not working. It's not sending email to the admins when negative feedback is received.

Please don't take this personal, but I have really noticed when I read through the 23 pages of this thread, but when users ask a question, they're told, have you done this? When they could be told try this, step 1, step 2..., and explain. I think I asked/questioned three or four times about something, only to find out that I have that setting set properly and it's still not working.

As an estimation, we could probably lose half the pages of questions and answers in this mod if questions were actually answered directly.

JD, thanks again for your assistance, I appreciate what the knowledgeable people are doing here, but not everyone is at that level and they do require clear explanation.

Thanks.

Well, there's a reason for that. And this question comes up a lot. I think it's important to explain why answers aren't always step by step explanations.

For one thing, telling a user to do Step 1, Step 2 isn't practical until you have some idea of the users level of experience. There's hundreds of users on this site daily and it's impossible to guess, or even remember, what a given user's knowledge of vB is. So if someone asks a basic question, you give a basic answer and only expand upon it if follow up questions are asked. This gives you a better idea of where they're at, and not to mention most of the time you could be thinking something totally different and answering a completely different question then the one asked.

In this case, I didn't really know you didn't understand where the permissions where set. When you asked where do I identify the iTrader Admin and I said in your User Group settings, there's no way I could have known that - Can Administer Ratings wouldn't be clear to you. Not until you asked a follow up question. Put simply, I just can't know when you didn't understand me until you tell me you didn't understand. And one can never know how much detail to add to an answer, without explaining everything you'd ever need to know at once. Basically, just repeating info you may not need. Proper support, even though I'm not the one supporting this modification, means Q&A back and forth until we both figure out what the problem is. That will always be more efficient then me just telling you what I don't know you don't know.

Now that we know you have actually set your iTrader Admins, we have to find a few more things. One, we need to know if your Admins all have their email addresses up to date. The other is we need to know if you email is just going into their Spam box. And we also need to know if emails are even being sent out by your server in the first place. Now, there's about a half dozen reasons why these could or could not be the case. But we need to figure that out first before we can move on to something else.

I guess being a registered license member since 2003 means... Anyways, to answer your questions. Both admins (I'm one of them), all have our email addresses up-to-date. I get email daily from the site, and it goes to my inbox, so no to the spam folder. I'm 100% sure that my server is sending email out, I setup and tested the sendmessage.php last night for unregistered users (Contact Us Link), and I got someones error today when they replied to a subscribed thread that they received.

I don't judge folks by that. I just try to be clear.

How about your suspicious activity emails? Have you tried assigning someone to test the system to see if you receive this email?

hey guys, how can I show "iTrader 0/0" in a normal post?

Like extreme overclocking

Hi

I dont know if it was mentioned yet, but the "correct" url depends on the hostname setting and when its set to "domain.tld", URLs with "www.domain.tld" are rejected and when the host/sitename is set to "www.domain.tld", then "domain.tld" is rejected.

Is there a way to allow both urls?

I've tried quite a few different things such as uninstalling, reinstalling and over riding yad yada yada, but always up with an error when editing usergroup permissions

Remove the mods bitfield file from the xml folder.

But then i can't set the permissions for this modification... or can i :D

hi DJ, had you been able to look further into the % or Total points issue?

Jason, I've got iTrader 2.0.1a installed on one of my forums and when strict URL checking is enabled, the system won't allow a moderator to modify any member ratings (they are not one of the members who started the referenced trade thread). The itrader_checkurl() function is always returning an invalid URL.

I checked the current 2.1.0 release and the function code did not change, so I assume the problem remains with the current version.

Any idea how I could modify the function so that moderators (super mods/admins) can modify ratings?

No luck so far.

Last night we upgraded our forum from 3.7.3 to 3.7.4. Now when someone tries to submit a feedback via iTrader, it tells them they do not have permission.

I tested it out as Admin and tried to leave feedback for another user. It allowed me to leave it but then it posted the feedback I left for the other member to MY feedback.

Any suggestions on how to restore this to work properly?

Looks like the settings were reset, go into the "Usergroup Manager" and set the "iTrader Permissions" to each usergroup permissions... :)

I am having trouble getting the proper trader rating to display on the postbit template. If you go to:

http://www.leanbulk.com/forum/waterc...g-fitexpo.html

As you see, the member Sonny has a rating of 9 being displayed, but if you click the number and look at his actual ratings he has 18. It hasn't been updating for a couple months now. Does anyone have any ideas?

thats because in the iTrader Options you have it set to ebay style rating (one point per unique user ) you need to change this option to NO and that will solve ur problem.


has anyone made their own memberinfo_block for this? so that it could be diplayed in a block on the right hand side along with the others?

I think if you move the existing iTrader Profile block add-on to the area where the right columns display it will display the same way.

so I uploaded all the itrader php files and xml files properly. I did nothing different from my other products such as vbgarage and the photo album is my point. Or did I miss something?

I can access the itrader software in my admin cp. I have the options to change things. Meaning I can go to vbulletin options--> itrader settings and everything is normal in that department. I made it "active" Duplicate User Rating Time Limit was changed to 24 like asked, same with Edit Time Limit was changed to 5.

So I added the proper html coding to my margin and the itrader link comes up fine as well. I go to click on the link and after clicking I get this ERROR MESSAGE....

One other thing is that in my Usergroups permission area, I don't see itrader settings. The readme file said to able the settings, since by default it is shut off. I didn't see anything in that area. I did however turn on itrader tho through vbulletin options.

-ERROR MESSAGE-

Warning: require_once([path]/includes/functions_itrader.php) [function.require-once]: failed to open stream: No such file or directory in [path]/itrader_global.php on line 24

Fatal error: require_once() [function.require]: Failed opening required '/home/content/b/o/n/bonesz28/html/forum/includes/functions_itrader.php' (include_path='.:/usr/local/php5/lib/php') in /home/content/b/o/n/bonesz28/html/forum/itrader_global.php on line 24

Thanks a bunch! Much appreciated!

I have just installed this. I can see everything in the control panels. I have setup the User groups but I can not see anything on the forum itself!

Nothing is in the menu bar or postbit.

I have uploaded everything into the correct area but it won't work - any ideas?

And did you do any of the template edits?

Nope! :erm: Forgot that bit :rolleyes:

Let's see what happens now ;)

Does anyone know what steps to take to create a page called "Member Trade Ratings" to show all members itrader stats on one page?

Anyone?

From the error message it looks like your missing files. Are you sure you uploaded everything in the upload folder?

I'll go back and double check. Maybe I put something in the wrong folder by mistake, so it can't pick up on the file.

Are you moving your files all at once or one at a time? If you move them all at once you'll be sure to put the right files in the right locations.