vb.org Archive
Page 8 of 28 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.5 Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=113)
-   -   Forms Hack (https://vborg.vbsupport.ru/showthread.php?t=93970)

ChrisBaktis 12-04-2005 11:35 PM
Quote:
Originally Posted by Martyjp
Since upgrading long answers no longer show up, any ideas?
I thought I was the only one - I have been killing myself today trying to figure out why everything shows except long answers - the questions show just fine but when I post the form to a thread the long answers do not show.

Skyline_GT 12-05-2005 01:53 AM
Quote:
Originally Posted by Abe1
i got a no permissions page when I clicked on it.
please try again..
fixed.

Abe1 12-05-2005 12:04 PM
Quote:
Originally Posted by ChrisBaktis
I thought I was the only one - I have been killing myself today trying to figure out why everything shows except long answers - the questions show just fine but when I post the form to a thread the long answers do not show.
Can you PM your plug-in? Make sure to wrap it in php tags.

Abe1 12-05-2005 12:07 PM
Quote:
Originally Posted by Skyline_GT
please try again..
fixed.
Go look at your plug-ins. It has something to do with a global_complete plug-in.

ChrisBaktis 12-05-2005 12:22 PM
Quote:
Originally Posted by Abe1
Can you PM your plug-in? Make sure to wrap it in php tags.
I had something more then this but when I couldnt get it to work I started from scratch to see if something was missed. Im actually trying to do a form with 1 Normal question and 2 long questions and that is it.

PHP Code:
// To add more then one form, copy this whole text, and creat a new plug-in with the hook location 'newthread_start'.
// After, change the form name. You can't have 2 forms with the same name.

// Name of this form
$formname = "memuplink";

if ($_REQUEST['do'] == $formname)
{

// #######################################################################
// ######################## CUSTOMIZE VARIABLES ##########################
// #######################################################################

////////////////////////////////////////////////////////////////////////////////////////////////////
////// BEGIN CUSTOMIZATION BELOW////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//VARIABLES
//Study how variables are add here to add or remove any. If you add a variable to your form, you must add it to part one and part two.
////////////////////////////////////////////////////////////////////////////////////////////////////

// Part 1
$vbulletin->input->clean_array_gpc('p', array(
'normalanswer1' => TYPE_STR,
'radioanswer1' => TYPE_STR,
'radioanswer2' => TYPE_STR,
'radioanswer3' => TYPE_STR,
'radioanswer3other' => TYPE_STR,
'answer1' => TYPE_STR,
'answer2' => TYPE_STR,
'answer3' => TYPE_STR,
'dropdownanswer1' => TYPE_STR
));

// Part 2
$normalanswer1 = $vbulletin->GPC['normalanswer1'];
$radioanswer1 = $vbulletin->GPC['radioanswer1'];
$radioanswer2 = $vbulletin->GPC['radioanswer2'];
$radioanswer3 = $vbulletin->GPC['radioanswer3'];
$radioanswer3other = $vbulletin->GPC['radioanswer3other'];
$answer1 = $vbulletin->GPC['answer1'];
$answer2 = $vbulletin->GPC['answer2'];
$answer3 = $vbulletin->GPC['answer3'];
$dropdownanswer1 = $vbulletin->GPC['dropdownanswer1'];

////////////////////////////////////////////////////////////////////////////////////////////////////
//USERGROUPS ALLOWED
//You can add or remove usegroups that are ALLOWED to use this form by changing the numbers below in the array.
//To enable this feature, remove the '//' before the 'if'.
////////////////////////////////////////////////////////////////////////////////////////////////////

// if (!in_array($vbulletin->userinfo['usergroupid'], array(15,19,22,26,24,27,28,5,6,13))) print_no_permission();

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NAME OF TEMPLATES - DO THIS BIT IF YOU ARE MAKING MORE FORMS AND WANT TO USE A DIFFERENT LOOKING TEMPLATE
////////////////////////////////////////////////////////////////////////////////////////////////////

// Name of the main template
$maintemplate = "forms_memup_link";
// Name of the answer template
$answertemplate = "forms_memup_link_answers";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//CHOOSE WHETHER YOU WANT FORM TO BE POSTED IN A NEW THREAD, NEW POLL, REPLY TO EXISITING THREAD, PMed OR EMAILED
///////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE POSTED - 1 = yes, 0 = no
$formforum = "1";

//FORUM TO POST NEW THREAD IN
//You CAN make this number a variable. You can have a drop down menu or in the link like do=form&f=1. Make sure you add it the variables list.
$formforumid = "132";

//ENABLE POLL TO BE CREATED - 1 = yes, 0 = no
$formpoll = "0";
$polloption[1] = "Yes";
$polloption[2] = "No";
$polloption[3] = "Maybe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO REPLY TO EXISTING THREAD - 1 = yes, 0 = no
$formreply = "0";

//EXISTING THREAD ID FOR FORM TO REPLY IN
$formreplythreadid = "12345";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE PMED - 1 = yes, 0 = no
$formpm = "0";

//USERNAME TO PM TO
$formpmname = "Abe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE EMAILED - 1 = yes, 0 = no
$formemail = "0";

//EMAIL ADDRESS TO EMAIL TO
$formemailaddress = "youremail@yourforums.com";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//REDIRECT OPTIONS:
// 0 - thank you message (thread, reply, pm, or email)
// 1 - redirect to post (thread or reply)
// 2 - redirect to thread (thread only)
// 3 - redirect to forum (thread only)
// 4 - redirect to editpost to upload attachments (thread or reply)
//
// Feel free to change the thank you message if you choose option 0
////////////////////////////////////////////////////////////////////////////////////////////////////

$redirectoption = "0";

$errormessage = "Thank you for submitting this form!"; //This is the thank you message

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//FORCE USER TO ANSWER ALL QUESTIONS - 1 = yes, 0 = no
//If you added or deleted variables, you must edit what it checked for. Search for "$answerall ==" and edit 2 lines under it.
////////////////////////////////////////////////////////////////////////////////////////////////////

$answerall = "0";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formtitle = "Member Promotion Awards Form";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF THREAD/POST/PM/EMAIL (do not use quotation marks in the title or you will get a parse error)
//You may use variables from the form for this.
////////////////////////////////////////////////////////////////////////////////////////////////////

$posttitle = "$formtitle";

////////////////////////////////////////////////////////////////////////////////////////////////////
//PURPOSE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formpurpose = "The purpose of this form is to allow you to submit a form, and this form will be made into a thread in a particular forum, or be PMed to a moderator or be emailed to a moderator.";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion1 = "Current Email Address";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion1 = "Choose one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice1a = "yes";
$radiochoice1b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 2 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion2 = "Choose another one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice2a = "good";
$radiochoice2b = "bad";
$radiochoice2c = "both";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 3 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion3 = "Is it yes or no? If yes, please elaborate";

// The following choices must NOT have quotation marks
$radiochoice3a = "yes";
$radiochoice3b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//QUESTION 1 (do not use quotation marks or you will get a parse error)
$question1 = "What is your name?";
$explain1 = "Please enter your real name here.";

//QUESTION 2 (do not use quotation marks or you will get a parse error)
$question2 = "What is your email?";
$explain2 = "Please enter your real email here.";

//QUESTION 3 (do not use quotation marks or you will get a parse error)
$question3 = "What is your website?";
$explain3 = "Please enter your URL here.";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//DROP DOWN CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$dropdownquestion1 = "What is your gender?";

// The following choices must NOT have quotation marks
$dropdownchoice1a = "no comment";
$dropdownchoice1b = "male";
$dropdownchoice1c = "female";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//LONG TEXT AREA INPUT: QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$longquestion1 = "Full Name & Mailing Address";
$longexplain1 = "Without this information we cannot send out your award";

////////////////////////////////////////////////////////////////////////////////////////////////
////// END OF CUSTOMIZATION ////////////////////////////////////////////////////////////////////
/////  DO NOT CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING!!! ////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

// #######################################################################
// ######################## START MAIN SCRIPT ############################
// #######################################################################
if ($_REQUEST['action'] == '')
{
  $_REQUEST['action'] = "form";
}


$bbuserinfo = $vbulletin->userinfo;

// start navbar
$navbits = array();
$navbits['newthread.php?' . $vbulletin->session->vars['sessionurl'] . "do=$formname"] = $formtitle;

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

if ($_REQUEST['action'] == "submit")
{

    if ($answerall == "1")
    {
        if ($normalanswer1 == '' OR $radioanswer1 == '' OR $radioanswer2 == '' OR $radioanswer3 == '' OR $answer1 == '' OR $answer2 == '' OR $answer3 == '' OR $longanswer1 == '')
        {
            $errormessage = "$bbuserinfo[username], you need to answer every question!";
            eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
            exit();
        }
    }

    $vbulletin->input->clean_array_gpc('p', array(
        'wysiwyg'            => TYPE_BOOL,
        'message'            => TYPE_STR
        ));
            
    if ($vbulletin->GPC['wysiwyg'])
    {
        require_once(DIR . '/includes/functions_wysiwyg.php');
        $longanswer1 = convert_wysiwyg_html_to_bbcode($vbulletin->GPC['message'], $foruminfo['allowhtml']);
    }
    else
    {
        $longanswer1 =& $vbulletin->GPC['message'];
    }
            
    eval('$formsend = "' . fetch_template("$answertemplate") . '";');

    if ($formforum == "1")
    {
        $foruminfo = verify_id('forum', $formforumid, 0, 1);
        $forumperms = fetch_permissions($foruminfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = '1';
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('thread', $foruminfo, array(), array(), $newpost, $errors);

        if ($formpoll == "1")
        {
            $threadinfo = verify_id('thread', $newpost[threadid], 0, 1);
            $polloptions = count($polloption);
            $question = $posttitle;
            $vbulletin->GPC['options'] = $polloption;

            $counter = 0;
            $optioncount = 0;
            $badoption = '';
            while ($counter++ < $polloptions)
            { // 0..Pollnum-1 we want, as arrays start with 0
                if ($vbulletin->options['maxpolllength'] AND vbstrlen($vbulletin->GPC['options']["$counter"]) > $vbulletin->options['maxpolllength'])
                {
                    $badoption .= iif($badoption, ', ') . $counter;
                }
                if (!empty($vbulletin->GPC['options']["$counter"]))
                {
                    $optioncount++;
                }
            }

            // Add the poll
            $poll =& datamanager_init('Poll', $vbulletin, ERRTYPE_STANDARD);

            $counter = 0;
            while ($counter++ < $polloptions)
            {
                if ($vbulletin->GPC['options']["$counter"] != '')
                {
                    $poll->set_option($vbulletin->GPC['options']["$counter"]);
                }
            }

            $poll->set('question',    $question);
            $poll->set('dateline',    TIMENOW);
            $poll->set('active',    '1');

            $pollid = $poll->save();
            //end create new poll

            // update thread
            $threadman =& datamanager_init('Thread', $vbulletin, ERRTYPE_STANDARD, 'threadpost');
            $threadman->set_existing($threadinfo);
            $threadman->set('pollid', $pollid);
            $threadman->save();

        }
    }

    if ($formreply == "1")
    {
        $threadinfo = verify_id('thread', $formreplythreadid, 0, 1);
        $forumperms = fetch_permissions($threadinfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = "1";
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('reply', $foruminfo, $threadinfo, $postinfo, $newpost, $errors);
    }

    if ($formpm == "1")
    {
        $vbulletin->GPC['message'] =& $formsend;
        $vbulletin->GPC['title'] =& $posttitle;
        $vbulletin->GPC['recipients'] =& $formpmname;

        $pm['message'] =& $vbulletin->GPC['message'];
        $pm['title'] =& $vbulletin->GPC['title'];
        $pm['recipients'] =& $vbulletin->GPC['recipients'];


        // create the DM to do error checking and insert the new PM
        $pmdm =& datamanager_init('PM', $vbulletin, ERRTYPE_ARRAY);

        $pmdm->set('fromuserid', $vbulletin->userinfo['userid']);
        $pmdm->set('fromusername', $vbulletin->userinfo['username']);
        $pmdm->setr('title', $pm['title']);
        $pmdm->setr('message', $pm['message']);
        $pmdm->set_recipients($pm['recipients'], $permissions);
        $pmdm->set('dateline', TIMENOW);

        // everything's good!
        $pmdm->save();
    }

    if ($formemail == "1")
    {
        vbmail($formemailaddress, $posttitle, $formsend);
    }

    if ($redirectoption == "1")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "2")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "t=$newpost[threadid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "3")
    {
        $vbulletin->url = 'forumdisplay.php?' . $vbulletin->session->vars['sessionurl'] . "f=$foruminfo[forumid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "4")
    {
        $vbulletin->url = 'editpost.php?do=editpost&' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
    exit();
}

if ($_REQUEST['action'] == 'form')
{
              // set message box width to usercp size
            $stylevar['messagewidth'] = $stylevar['messagewidth_usercp'];
            $dontusewysiwyg = 1;
            $editorid = construct_edit_toolbar();

  eval('print_output("' . fetch_template("$maintemplate") . '");');
}
} 

Abe1 12-05-2005 12:25 PM
Quote:
Originally Posted by ChrisBaktis
I had something more then this but when I couldnt get it to work I started from scratch to see if something was missed. Im actually trying to do a form with 1 Normal question and 2 long questions and that is it.

PHP Code:
// To add more then one form, copy this whole text, and creat a new plug-in with the hook location 'newthread_start'.
// After, change the form name. You can't have 2 forms with the same name.

// Name of this form
$formname = "memuplink";

if ($_REQUEST['do'] == $formname)
{

// #######################################################################
// ######################## CUSTOMIZE VARIABLES ##########################
// #######################################################################

////////////////////////////////////////////////////////////////////////////////////////////////////
////// BEGIN CUSTOMIZATION BELOW////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//VARIABLES
//Study how variables are add here to add or remove any. If you add a variable to your form, you must add it to part one and part two.
////////////////////////////////////////////////////////////////////////////////////////////////////

// Part 1
$vbulletin->input->clean_array_gpc('p', array(
'normalanswer1' => TYPE_STR,
'radioanswer1' => TYPE_STR,
'radioanswer2' => TYPE_STR,
'radioanswer3' => TYPE_STR,
'radioanswer3other' => TYPE_STR,
'answer1' => TYPE_STR,
'answer2' => TYPE_STR,
'answer3' => TYPE_STR,
'dropdownanswer1' => TYPE_STR
));

// Part 2
$normalanswer1 = $vbulletin->GPC['normalanswer1'];
$radioanswer1 = $vbulletin->GPC['radioanswer1'];
$radioanswer2 = $vbulletin->GPC['radioanswer2'];
$radioanswer3 = $vbulletin->GPC['radioanswer3'];
$radioanswer3other = $vbulletin->GPC['radioanswer3other'];
$answer1 = $vbulletin->GPC['answer1'];
$answer2 = $vbulletin->GPC['answer2'];
$answer3 = $vbulletin->GPC['answer3'];
$dropdownanswer1 = $vbulletin->GPC['dropdownanswer1'];

////////////////////////////////////////////////////////////////////////////////////////////////////
//USERGROUPS ALLOWED
//You can add or remove usegroups that are ALLOWED to use this form by changing the numbers below in the array.
//To enable this feature, remove the '//' before the 'if'.
////////////////////////////////////////////////////////////////////////////////////////////////////

// if (!in_array($vbulletin->userinfo['usergroupid'], array(15,19,22,26,24,27,28,5,6,13))) print_no_permission();

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NAME OF TEMPLATES - DO THIS BIT IF YOU ARE MAKING MORE FORMS AND WANT TO USE A DIFFERENT LOOKING TEMPLATE
////////////////////////////////////////////////////////////////////////////////////////////////////

// Name of the main template
$maintemplate = "forms_memup_link";
// Name of the answer template
$answertemplate = "forms_memup_link_answers";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//CHOOSE WHETHER YOU WANT FORM TO BE POSTED IN A NEW THREAD, NEW POLL, REPLY TO EXISITING THREAD, PMed OR EMAILED
///////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE POSTED - 1 = yes, 0 = no
$formforum = "1";

//FORUM TO POST NEW THREAD IN
//You CAN make this number a variable. You can have a drop down menu or in the link like do=form&f=1. Make sure you add it the variables list.
$formforumid = "132";

//ENABLE POLL TO BE CREATED - 1 = yes, 0 = no
$formpoll = "0";
$polloption[1] = "Yes";
$polloption[2] = "No";
$polloption[3] = "Maybe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO REPLY TO EXISTING THREAD - 1 = yes, 0 = no
$formreply = "0";

//EXISTING THREAD ID FOR FORM TO REPLY IN
$formreplythreadid = "12345";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE PMED - 1 = yes, 0 = no
$formpm = "0";

//USERNAME TO PM TO
$formpmname = "Abe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE EMAILED - 1 = yes, 0 = no
$formemail = "0";

//EMAIL ADDRESS TO EMAIL TO
$formemailaddress = "youremail@yourforums.com";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//REDIRECT OPTIONS:
// 0 - thank you message (thread, reply, pm, or email)
// 1 - redirect to post (thread or reply)
// 2 - redirect to thread (thread only)
// 3 - redirect to forum (thread only)
// 4 - redirect to editpost to upload attachments (thread or reply)
//
// Feel free to change the thank you message if you choose option 0
////////////////////////////////////////////////////////////////////////////////////////////////////

$redirectoption = "0";

$errormessage = "Thank you for submitting this form!"; //This is the thank you message

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//FORCE USER TO ANSWER ALL QUESTIONS - 1 = yes, 0 = no
//If you added or deleted variables, you must edit what it checked for. Search for "$answerall ==" and edit 2 lines under it.
////////////////////////////////////////////////////////////////////////////////////////////////////

$answerall = "0";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formtitle = "Member Promotion Awards Form";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF THREAD/POST/PM/EMAIL (do not use quotation marks in the title or you will get a parse error)
//You may use variables from the form for this.
////////////////////////////////////////////////////////////////////////////////////////////////////

$posttitle = "$formtitle";

////////////////////////////////////////////////////////////////////////////////////////////////////
//PURPOSE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formpurpose = "The purpose of this form is to allow you to submit a form, and this form will be made into a thread in a particular forum, or be PMed to a moderator or be emailed to a moderator.";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion1 = "Current Email Address";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion1 = "Choose one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice1a = "yes";
$radiochoice1b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 2 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion2 = "Choose another one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice2a = "good";
$radiochoice2b = "bad";
$radiochoice2c = "both";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 3 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion3 = "Is it yes or no? If yes, please elaborate";

// The following choices must NOT have quotation marks
$radiochoice3a = "yes";
$radiochoice3b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//QUESTION 1 (do not use quotation marks or you will get a parse error)
$question1 = "What is your name?";
$explain1 = "Please enter your real name here.";

//QUESTION 2 (do not use quotation marks or you will get a parse error)
$question2 = "What is your email?";
$explain2 = "Please enter your real email here.";

//QUESTION 3 (do not use quotation marks or you will get a parse error)
$question3 = "What is your website?";
$explain3 = "Please enter your URL here.";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//DROP DOWN CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$dropdownquestion1 = "What is your gender?";

// The following choices must NOT have quotation marks
$dropdownchoice1a = "no comment";
$dropdownchoice1b = "male";
$dropdownchoice1c = "female";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//LONG TEXT AREA INPUT: QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$longquestion1 = "Full Name & Mailing Address";
$longexplain1 = "Without this information we cannot send out your award";

////////////////////////////////////////////////////////////////////////////////////////////////
////// END OF CUSTOMIZATION ////////////////////////////////////////////////////////////////////
/////  DO NOT CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING!!! ////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

// #######################################################################
// ######################## START MAIN SCRIPT ############################
// #######################################################################
if ($_REQUEST['action'] == '')
{
  $_REQUEST['action'] = "form";
}


$bbuserinfo = $vbulletin->userinfo;

// start navbar
$navbits = array();
$navbits['newthread.php?' . $vbulletin->session->vars['sessionurl'] . "do=$formname"] = $formtitle;

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

if ($_REQUEST['action'] == "submit")
{

    if ($answerall == "1")
    {
        if ($normalanswer1 == '' OR $radioanswer1 == '' OR $radioanswer2 == '' OR $radioanswer3 == '' OR $answer1 == '' OR $answer2 == '' OR $answer3 == '' OR $longanswer1 == '')
        {
            $errormessage = "$bbuserinfo[username], you need to answer every question!";
            eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
            exit();
        }
    }

    $vbulletin->input->clean_array_gpc('p', array(
        'wysiwyg'            => TYPE_BOOL,
        'message'            => TYPE_STR
        ));
            
    if ($vbulletin->GPC['wysiwyg'])
    {
        require_once(DIR . '/includes/functions_wysiwyg.php');
        $longanswer1 = convert_wysiwyg_html_to_bbcode($vbulletin->GPC['message'], $foruminfo['allowhtml']);
    }
    else
    {
        $longanswer1 =& $vbulletin->GPC['message'];
    }
            
    eval('$formsend = "' . fetch_template("$answertemplate") . '";');

    if ($formforum == "1")
    {
        $foruminfo = verify_id('forum', $formforumid, 0, 1);
        $forumperms = fetch_permissions($foruminfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = '1';
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('thread', $foruminfo, array(), array(), $newpost, $errors);

        if ($formpoll == "1")
        {
            $threadinfo = verify_id('thread', $newpost[threadid], 0, 1);
            $polloptions = count($polloption);
            $question = $posttitle;
            $vbulletin->GPC['options'] = $polloption;

            $counter = 0;
            $optioncount = 0;
            $badoption = '';
            while ($counter++ < $polloptions)
            { // 0..Pollnum-1 we want, as arrays start with 0
                if ($vbulletin->options['maxpolllength'] AND vbstrlen($vbulletin->GPC['options']["$counter"]) > $vbulletin->options['maxpolllength'])
                {
                    $badoption .= iif($badoption, ', ') . $counter;
                }
                if (!empty($vbulletin->GPC['options']["$counter"]))
                {
                    $optioncount++;
                }
            }

            // Add the poll
            $poll =& datamanager_init('Poll', $vbulletin, ERRTYPE_STANDARD);

            $counter = 0;
            while ($counter++ < $polloptions)
            {
                if ($vbulletin->GPC['options']["$counter"] != '')
                {
                    $poll->set_option($vbulletin->GPC['options']["$counter"]);
                }
            }

            $poll->set('question',    $question);
            $poll->set('dateline',    TIMENOW);
            $poll->set('active',    '1');

            $pollid = $poll->save();
            //end create new poll

            // update thread
            $threadman =& datamanager_init('Thread', $vbulletin, ERRTYPE_STANDARD, 'threadpost');
            $threadman->set_existing($threadinfo);
            $threadman->set('pollid', $pollid);
            $threadman->save();

        }
    }

    if ($formreply == "1")
    {
        $threadinfo = verify_id('thread', $formreplythreadid, 0, 1);
        $forumperms = fetch_permissions($threadinfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = "1";
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('reply', $foruminfo, $threadinfo, $postinfo, $newpost, $errors);
    }

    if ($formpm == "1")
    {
        $vbulletin->GPC['message'] =& $formsend;
        $vbulletin->GPC['title'] =& $posttitle;
        $vbulletin->GPC['recipients'] =& $formpmname;

        $pm['message'] =& $vbulletin->GPC['message'];
        $pm['title'] =& $vbulletin->GPC['title'];
        $pm['recipients'] =& $vbulletin->GPC['recipients'];


        // create the DM to do error checking and insert the new PM
        $pmdm =& datamanager_init('PM', $vbulletin, ERRTYPE_ARRAY);

        $pmdm->set('fromuserid', $vbulletin->userinfo['userid']);
        $pmdm->set('fromusername', $vbulletin->userinfo['username']);
        $pmdm->setr('title', $pm['title']);
        $pmdm->setr('message', $pm['message']);
        $pmdm->set_recipients($pm['recipients'], $permissions);
        $pmdm->set('dateline', TIMENOW);

        // everything's good!
        $pmdm->save();
    }

    if ($formemail == "1")
    {
        vbmail($formemailaddress, $posttitle, $formsend);
    }

    if ($redirectoption == "1")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "2")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "t=$newpost[threadid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "3")
    {
        $vbulletin->url = 'forumdisplay.php?' . $vbulletin->session->vars['sessionurl'] . "f=$foruminfo[forumid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "4")
    {
        $vbulletin->url = 'editpost.php?do=editpost&' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
    exit();
}

if ($_REQUEST['action'] == 'form')
{
              // set message box width to usercp size
            $stylevar['messagewidth'] = $stylevar['messagewidth_usercp'];
            $dontusewysiwyg = 1;
            $editorid = construct_edit_toolbar();

  eval('print_output("' . fetch_template("$maintemplate") . '");');
}
} 
I think I know what the problem is. Compare your custom template with the new template and see how the long_answer is done. All you need is $message_area.

Martyjp 12-05-2005 12:31 PM
just pm'ed you about this as well, thanks

Abe1 12-05-2005 12:33 PM
Quote:
Originally Posted by Martyjp
just pm'ed you about this as well, thanks
Can you check what I just answered him?

Quote:
I think I know what the problem is. Compare your custom template with the new template and see how the long_answer is done. All you need is $message_area.

ChrisBaktis 12-05-2005 12:35 PM
this is how i call the long question in the template.

PHP Code:
<b>$longquestion1<b><br> 
    $longexplain1<br>
    <textarea rows="5" cols="50" name="longanswer1"></textarea> 

Abe1 12-05-2005 12:37 PM
Quote:
Originally Posted by ChrisBaktis
this is how i call the long question in the template.

PHP Code:
<b>$longquestion1<b><br> 
    $longexplain1<br>
    <textarea rows="5" cols="50" name="longanswer1"></textarea> 
Change this:
<textarea rows="5" cols="50" name="longanswer1"></textarea>
to:
$message_area

ChrisBaktis 12-05-2005 12:40 PM
Do I just replace 'textarea' with $message_area? if not how would I customize the size of the area?

Abe1 12-05-2005 12:42 PM
Quote:
Originally Posted by ChrisBaktis
Do I just replace 'textarea' with $message_area? if not how would I customize the size of the area?
You replace the whole textarea with $message_area. It will put the vb editor there. It get costomized by user's defaults. You can also look at the origonal template to see how exactly it's put in.

ChrisBaktis 12-05-2005 12:45 PM
thanks for the help - I kept looking for that form template thinking it would be located with other custom templates but it was farther down - never looked that far down - that could of elminated all this - thank you VERY much for your patience and help.

ChrisBaktis 12-05-2005 12:51 PM
One last question on this....is there a way to get a text area box with out the whole editor? Im trying to ask members for a mailing address that only needs to be a couple of lines and would have no use for a whole editor.

Abe1 12-05-2005 12:53 PM
Quote:
Originally Posted by ChrisBaktis
One last question on this....is there a way to get a text area box with out the whole editor? Im trying to ask members for a mailing address that only needs to be a couple of lines and would have no use for a whole editor.
Yes. Use the old text area but chane the name to something else. Make sure you add the new varable to the plug-in.

ChrisBaktis 12-05-2005 12:55 PM
GREAT thanks!

Martyjp 12-05-2005 01:05 PM
Quote:
Originally Posted by Abe1
Can you check what I just answered him?
Tried that but it hasnt worked, the vbeditor is there but whatever you put in it still dosent show, will have to take a longer look at it later when i get home from work

PtP 12-05-2005 10:21 PM
Thank you very much Abe this has got to be the most usefull and adaptable addition to any vbulletin forum out there ;)

One thing I would love to do is force the form to use a particular style rather than the default one that the forums are using, what would be the easiest way to archieve this?

ZGeek 12-05-2005 10:38 PM
I'm getting this error. Anyone got any idea?

"Fatal error: Unable to proceed with save while $errors array is not empty in class vB_DataManager_PM in /includes/class_dm.php on line 758"

ZGeek 12-05-2005 11:09 PM
Ahh I figured that one out. I was trying to PM the form, but my character limit was too small for the stuff it was trying to send.

Ramsesx 12-06-2005 04:49 AM
I tranfered my settings from 2.7 to 3.0 and get now this error:
Parse error: parse error, unexpected T_CONSTANT_ENCAPSED_STRING, expecting ')' in /home/www/web153/html/forum/newthread.php(68) : eval()'d code on line 34
that's my form:
Code:
// To add more then one form, copy this whole text, and creat a new plug-in with the hook location 'newthread_start'.
// After, change the form name. You can't have 2 forms with the same name.

// Name of this form
$formname = "form";

if ($_REQUEST['do'] == $formname)
{

// #######################################################################
// ######################## CUSTOMIZE VARIABLES ##########################
// #######################################################################

////////////////////////////////////////////////////////////////////////////////////////////////////
////// BEGIN CUSTOMIZATION BELOW////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//VARIABLES
//Study how variables are add here to add or remove any. If you add a variable to your form, you must add it to part one and part two.
////////////////////////////////////////////////////////////////////////////////////////////////////

// Part 1
$vbulletin->input->clean_array_gpc('p', array(
'normalanswer1' => TYPE_STR,
'normalanswer2' => TYPE_STR,
'dropanswer1' => TYPE_STR,
'radioanswer1' => TYPE_STR,
'radioanswer2' => TYPE_STR,
'radioanswer3' => TYPE_STR,
'radioanswer3other' => TYPE_STR,
'answer1' => TYPE_STR,
'answer2' => TYPE_STR
'answer3' => TYPE_STR,
'longanswer1' => TYPE_STR

));

// Part 2
$normalanswer1 = $vbulletin->GPC['normalanswer1'];
$normalanswer2 = $vbulletin->GPC['normalanswer2'];
$dropanswer1 = $vbulletin->GPC['dropanswer1'];
$radioanswer1 = $vbulletin->GPC['radioanswer1'];
$radioanswer2 = $vbulletin->GPC['radioanswer2'];
$radioanswer3 = $vbulletin->GPC['radioanswer3'];
$radioanswer3other = $vbulletin->GPC['radioanswer3other'];
$answer1 = $vbulletin->GPC['answer1'];
$answer2 = $vbulletin->GPC['answer2'];
$answer3 = $vbulletin->GPC['answer3'];
$longanswer1 = $vbulletin->GPC['longanswer1'];
////////////////////////////////////////////////////////////////////////////////////////////////////
//USERGROUPS ALLOWED
//You can add or remove usegroups that are ALLOWED to use this form by changing the numbers below in the array.
//To enable this feature, remove the '//' before the 'if'.
////////////////////////////////////////////////////////////////////////////////////////////////////

// if (!in_array($vbulletin->userinfo['usergroupid'], array(2,5,6,7))) print_no_permission();

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NAME OF TEMPLATES - DO THIS BIT IF YOU ARE MAKING MORE FORMS AND WANT TO USE A DIFFERENT LOOKING TEMPLATE
////////////////////////////////////////////////////////////////////////////////////////////////////

// Name of the main template
$maintemplate = "form";
// Name of the answer template
$answertemplate = "formanswers";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//CHOOSE WHETHER YOU WANT FORM TO BE POSTED IN A NEW THREAD, NEW POLL, REPLY TO EXISITING THREAD, PMed OR EMAILED
///////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE POSTED - 1 = yes, 0 = no
$formforum = "1";

//FORUM TO POST NEW THREAD IN
//You CAN make this number a variable. You can have a drop down menu or in the link like do=form&f=1. Make sure you add it the variables list.
$formforumid = "231";

//ENABLE POLL TO BE CREATED - 1 = yes, 0 = no
$formpoll = "0";
$polloption[1] = "Yes";
$polloption[2] = "No";
$polloption[3] = "Maybe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO REPLY TO EXISTING THREAD - 1 = yes, 0 = no
$formreply = "0";


//EXISTING THREAD ID FOR FORM TO REPLY IN
$formreplythreadid = "12345";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE PMED - 1 = yes, 0 = no
$formpm = "1";

//USERNAME TO PM TO
$formpmname = "MC";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE EMAILED - 1 = yes, 0 = no
$formemail = "0";

//EMAIL ADDRESS TO EMAIL TO
$formemailaddress = "youremail@yourforums.com";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//REDIRECT OPTIONS:
// 0 - thank you message (thread, reply, pm, or email)
// 1 - redirect to post (thread or reply)
// 2 - redirect to thread (thread only)
// 3 - redirect to forum (thread only)
// 4 - redirect to editpost to upload attachments (thread or reply)
//
// Feel free to change the thank you message if you choose option 0
////////////////////////////////////////////////////////////////////////////////////////////////////

$redirectoption = "0";

$errormessage = "$vbphrase[errormessage]"; //This is the thank you message

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//FORCE USER TO ANSWER ALL QUESTIONS - 1 = yes, 0 = no
//If you added or deleted variables, you must edit what it checked for. Search for "$answerall ==" and edit 2 lines under it.
////////////////////////////////////////////////////////////////////////////////////////////////////

$answerall = "0";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formtitle = "Modell Bericht";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF THREAD/POST/PM/EMAIL (do not use quotation marks in the title or you will get a parse error)
//You may use variables from the form for this.
////////////////////////////////////////////////////////////////////////////////////////////////////

$posttitle = "$formtitle";

////////////////////////////////////////////////////////////////////////////////////////////////////
//PURPOSE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formpurpose = "$vbphrase[formpurpose]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (Name der Agentur (wenn bei keiner Feld bitte auslassen):) 
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion1 = "$vbphrase[normalquestion1]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (Name des Modells:)
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion2 = "$vbphrase[normalquestion2]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//DROP DOWN BOX : QUESTION 1 (Haarfarbe:)
////////////////////////////////////////////////////////////////////////////////////////////////////

$dropquestion1 = "Haarfarbe";

$drop1 = "blond";
$drop2 = "schwarz";
$drop3 = "braun";
$drop4 = "brunett";
$drop5 = "rot";
$drop6 = "lila";
$drop7 = "sonstige";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion1 = "Choose one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice1a = "yes";
$radiochoice1b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 2 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion2 = "Choose another one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice2a = "good";
$radiochoice2b = "bad";
$radiochoice2c = "both";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 3 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion3 = "Is it yes or no? If yes, please elaborate";

// The following choices must NOT have quotation marks
$radiochoice3a = "yes";
$radiochoice3b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////
//QUESTION 1 (do not use quotation marks or you will get a parse error)
$question1 = "What is your name?";
$explain1 = "Please enter your real name here.";

//QUESTION 2 (do not use quotation marks or you will get a parse error)
$question2 = "What is your email?";
$explain2 = "Please enter your real email here.";

//QUESTION 3 (do not use quotation marks or you will get a parse error)
$question3 = "What is your website?";
$explain3 = "Please enter your URL here.";

////////////////////////////////////////////////////////////////////////////////////////////////////


////////////////////////////////////////////////////////////////////////////////////////////////////
//LONG TEXT AREA INPUT: QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$longquestion1 = "Please write down a paragraph about yourself.";
$longexplain1 = "For example, a bit about your experience in this area.";

////////////////////////////////////////////////////////////////////////////////////////////////
////// END OF CUSTOMIZATION ////////////////////////////////////////////////////////////////////
/////  DO NOT CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING!!! ////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

// #######################################################################
// ######################## START MAIN SCRIPT ############################
// #######################################################################
if ($_REQUEST['action'] == '')
{
  $_REQUEST['action'] = "form";
}


$bbuserinfo = $vbulletin->userinfo;

// start navbar
$navbits = array();
$navbits['newthread.php?' . $vbulletin->session->vars['sessionurl'] . "do=$formname"] = $formtitle;

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

if ($_REQUEST['action'] == "submit")
{

    if ($answerall == "1")
    {
        if ($normalanswer1 == '' OR $normalanswer2 == '' OR $dropquestion1 == '' OR $radioanswer1 == '' OR $radioanswer2 == '' OR $radioanswer3 == '' OR $answer1 == '' OR $answer2 == '' OR $answer3 == '' OR $longanswer1 == '')
        {
            $errormessage = "$bbuserinfo[username], you need to answer every question!";
            eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
            exit();
        }
    }

    $vbulletin->input->clean_array_gpc('p', array(
        'wysiwyg'            => TYPE_BOOL,
        'message'            => TYPE_STR
        ));
           
    if ($vbulletin->GPC['wysiwyg'])
    {
        require_once(DIR . '/includes/functions_wysiwyg.php');
        $longanswer1 = convert_wysiwyg_html_to_bbcode($vbulletin->GPC['message'], $foruminfo['allowhtml']);
    }
    else
    {
        $longanswer1 =& $vbulletin->GPC['message'];
    }
           
    eval('$formsend = "' . fetch_template("$answertemplate") . '";');

    if ($formforum == "1")
    {
        $foruminfo = verify_id('forum', $formforumid, 0, 1);
        $forumperms = fetch_permissions($foruminfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = '1';
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('thread', $foruminfo, array(), array(), $newpost, $errors);

        if ($formpoll == "1")
        {
            $threadinfo = verify_id('thread', $newpost[threadid], 0, 1);
            $polloptions = count($polloption);
            $question = $posttitle;
            $vbulletin->GPC['options'] = $polloption;

            $counter = 0;

            $optioncount = 0;
            $badoption = '';
            while ($counter++ < $polloptions)
            { // 0..Pollnum-1 we want, as arrays start with 0
                if ($vbulletin->options['maxpolllength'] AND vbstrlen($vbulletin->GPC['options']["$counter"]) > $vbulletin->options['maxpolllength'])
                {
                    $badoption .= iif($badoption, ', ') . $counter;
                }
                if (!empty($vbulletin->GPC['options']["$counter"]))
                {
                    $optioncount++;
                }
            }

            // Add the poll
            $poll =& datamanager_init('Poll', $vbulletin, ERRTYPE_STANDARD);

            $counter = 0;
            while ($counter++ < $polloptions)
            {
                if ($vbulletin->GPC['options']["$counter"] != '')
                {
                    $poll->set_option($vbulletin->GPC['options']["$counter"]);
                }
            }

            $poll->set('question',    $question);
            $poll->set('dateline',    TIMENOW);
            $poll->set('active',    '1');

            $pollid = $poll->save();
            //end create new poll

            // update thread
            $threadman =& datamanager_init('Thread', $vbulletin, ERRTYPE_STANDARD, 'threadpost');
            $threadman->set_existing($threadinfo);
            $threadman->set('pollid', $pollid);
            $threadman->save();

        }
    }

    if ($formreply == "1")
    {
        $threadinfo = verify_id('thread', $formreplythreadid, 0, 1);
        $forumperms = fetch_permissions($threadinfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = "1";
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('reply', $foruminfo, $threadinfo, $postinfo, $newpost, $errors);
    }

    if ($formpm == "1")
    {
        $vbulletin->GPC['message'] =& $formsend;
        $vbulletin->GPC['title'] =& $posttitle;
        $vbulletin->GPC['recipients'] =& $formpmname;

        $pm['message'] =& $vbulletin->GPC['message'];
        $pm['title'] =& $vbulletin->GPC['title'];
        $pm['recipients'] =& $vbulletin->GPC['recipients'];


        // create the DM to do error checking and insert the new PM
        $pmdm =& datamanager_init('PM', $vbulletin, ERRTYPE_ARRAY);

        $pmdm->set('fromuserid', $vbulletin->userinfo['userid']);
        $pmdm->set('fromusername', $vbulletin->userinfo['username']);
        $pmdm->setr('title', $pm['title']);
        $pmdm->setr('message', $pm['message']);
        $pmdm->set_recipients($pm['recipients'], $permissions);
        $pmdm->set('dateline', TIMENOW);

        // everything's good!
        $pmdm->save();
    }

    if ($formemail == "1")
    {
        vbmail($formemailaddress, $posttitle, $formsend);
    }

    if ($redirectoption == "1")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "2")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "t=$newpost[threadid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "3")
    {
        $vbulletin->url = 'forumdisplay.php?' . $vbulletin->session->vars['sessionurl'] . "f=$foruminfo[forumid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "4")
    {
        $vbulletin->url = 'editpost.php?do=editpost&' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
    exit();
}

if ($_REQUEST['action'] == 'form')
{
              // set message box width to usercp size
            $stylevar['messagewidth'] = $stylevar['messagewidth_usercp'];
            $dontusewysiwyg = 1;
            $editorid = construct_edit_toolbar();

  eval('print_output("' . fetch_template("$maintemplate") . '");');
}
}

Abe1 12-06-2005 12:05 PM
Quote:
Originally Posted by Ramsesx
I tranfered my settings from 2.7 to 3.0 and get now this error:
Parse error: parse error, unexpected T_CONSTANT_ENCAPSED_STRING, expecting ')' in /home/www/web153/html/forum/newthread.php(68) : eval()'d code on line 34
that's my form:
Code:
// To add more then one form, copy this whole text, and creat a new plug-in with the hook location 'newthread_start'.
// After, change the form name. You can't have 2 forms with the same name.

// Name of this form
$formname = "form";

if ($_REQUEST['do'] == $formname)
{

// #######################################################################
// ######################## CUSTOMIZE VARIABLES ##########################
// #######################################################################

////////////////////////////////////////////////////////////////////////////////////////////////////
////// BEGIN CUSTOMIZATION BELOW////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//VARIABLES
//Study how variables are add here to add or remove any. If you add a variable to your form, you must add it to part one and part two.
////////////////////////////////////////////////////////////////////////////////////////////////////

// Part 1
$vbulletin->input->clean_array_gpc('p', array(
'normalanswer1' => TYPE_STR,
'normalanswer2' => TYPE_STR,
'dropanswer1' => TYPE_STR,
'radioanswer1' => TYPE_STR,
'radioanswer2' => TYPE_STR,
'radioanswer3' => TYPE_STR,
'radioanswer3other' => TYPE_STR,
'answer1' => TYPE_STR,
'answer2' => TYPE_STR
'answer3' => TYPE_STR,
'longanswer1' => TYPE_STR

));

// Part 2
$normalanswer1 = $vbulletin->GPC['normalanswer1'];
$normalanswer2 = $vbulletin->GPC['normalanswer2'];
$dropanswer1 = $vbulletin->GPC['dropanswer1'];
$radioanswer1 = $vbulletin->GPC['radioanswer1'];
$radioanswer2 = $vbulletin->GPC['radioanswer2'];
$radioanswer3 = $vbulletin->GPC['radioanswer3'];
$radioanswer3other = $vbulletin->GPC['radioanswer3other'];
$answer1 = $vbulletin->GPC['answer1'];
$answer2 = $vbulletin->GPC['answer2'];
$answer3 = $vbulletin->GPC['answer3'];
$longanswer1 = $vbulletin->GPC['longanswer1'];
////////////////////////////////////////////////////////////////////////////////////////////////////
//USERGROUPS ALLOWED
//You can add or remove usegroups that are ALLOWED to use this form by changing the numbers below in the array.
//To enable this feature, remove the '//' before the 'if'.
////////////////////////////////////////////////////////////////////////////////////////////////////

// if (!in_array($vbulletin->userinfo['usergroupid'], array(2,5,6,7))) print_no_permission();

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NAME OF TEMPLATES - DO THIS BIT IF YOU ARE MAKING MORE FORMS AND WANT TO USE A DIFFERENT LOOKING TEMPLATE
////////////////////////////////////////////////////////////////////////////////////////////////////

// Name of the main template
$maintemplate = "form";
// Name of the answer template
$answertemplate = "formanswers";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//CHOOSE WHETHER YOU WANT FORM TO BE POSTED IN A NEW THREAD, NEW POLL, REPLY TO EXISITING THREAD, PMed OR EMAILED
///////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE POSTED - 1 = yes, 0 = no
$formforum = "1";

//FORUM TO POST NEW THREAD IN
//You CAN make this number a variable. You can have a drop down menu or in the link like do=form&f=1. Make sure you add it the variables list.
$formforumid = "231";

//ENABLE POLL TO BE CREATED - 1 = yes, 0 = no
$formpoll = "0";
$polloption[1] = "Yes";
$polloption[2] = "No";
$polloption[3] = "Maybe";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO REPLY TO EXISTING THREAD - 1 = yes, 0 = no
$formreply = "0";


//EXISTING THREAD ID FOR FORM TO REPLY IN
$formreplythreadid = "12345";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE PMED - 1 = yes, 0 = no
$formpm = "1";

//USERNAME TO PM TO
$formpmname = "MC";

////////////////////////////////////////////////////////////////////////////////////////////////////

//ENABLE FORM TO BE EMAILED - 1 = yes, 0 = no
$formemail = "0";

//EMAIL ADDRESS TO EMAIL TO
$formemailaddress = "youremail@yourforums.com";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//REDIRECT OPTIONS:
// 0 - thank you message (thread, reply, pm, or email)
// 1 - redirect to post (thread or reply)
// 2 - redirect to thread (thread only)
// 3 - redirect to forum (thread only)
// 4 - redirect to editpost to upload attachments (thread or reply)
//
// Feel free to change the thank you message if you choose option 0
////////////////////////////////////////////////////////////////////////////////////////////////////

$redirectoption = "0";

$errormessage = "$vbphrase[errormessage]"; //This is the thank you message

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//FORCE USER TO ANSWER ALL QUESTIONS - 1 = yes, 0 = no
//If you added or deleted variables, you must edit what it checked for. Search for "$answerall ==" and edit 2 lines under it.
////////////////////////////////////////////////////////////////////////////////////////////////////

$answerall = "0";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formtitle = "Modell Bericht";

////////////////////////////////////////////////////////////////////////////////////////////////////
//TITLE OF THREAD/POST/PM/EMAIL (do not use quotation marks in the title or you will get a parse error)
//You may use variables from the form for this.
////////////////////////////////////////////////////////////////////////////////////////////////////

$posttitle = "$formtitle";

////////////////////////////////////////////////////////////////////////////////////////////////////
//PURPOSE OF FORM (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$formpurpose = "$vbphrase[formpurpose]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (Name der Agentur (wenn bei keiner Feld bitte auslassen):) 
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion1 = "$vbphrase[normalquestion1]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//NORMAL INPUT BOX : QUESTION 1 (Name des Modells:)
////////////////////////////////////////////////////////////////////////////////////////////////////

$normalquestion2 = "$vbphrase[normalquestion2]";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//DROP DOWN BOX : QUESTION 1 (Haarfarbe:)
////////////////////////////////////////////////////////////////////////////////////////////////////

$dropquestion1 = "Haarfarbe";

$drop1 = "blond";
$drop2 = "schwarz";
$drop3 = "braun";
$drop4 = "brunett";
$drop5 = "rot";
$drop6 = "lila";
$drop7 = "sonstige";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion1 = "Choose one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice1a = "yes";
$radiochoice1b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 2 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion2 = "Choose another one of the following choices";

// The following choices must NOT have quotation marks
$radiochoice2a = "good";
$radiochoice2b = "bad";
$radiochoice2c = "both";

////////////////////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////
//RADIO BOX CHOICES : QUESTION 3 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$radioquestion3 = "Is it yes or no? If yes, please elaborate";

// The following choices must NOT have quotation marks
$radiochoice3a = "yes";
$radiochoice3b = "no";

////////////////////////////////////////////////////////////////////////////////////////////////////
//QUESTION 1 (do not use quotation marks or you will get a parse error)
$question1 = "What is your name?";
$explain1 = "Please enter your real name here.";

//QUESTION 2 (do not use quotation marks or you will get a parse error)
$question2 = "What is your email?";
$explain2 = "Please enter your real email here.";

//QUESTION 3 (do not use quotation marks or you will get a parse error)
$question3 = "What is your website?";
$explain3 = "Please enter your URL here.";

////////////////////////////////////////////////////////////////////////////////////////////////////


////////////////////////////////////////////////////////////////////////////////////////////////////
//LONG TEXT AREA INPUT: QUESTION 1 (do not use quotation marks or you will get a parse error)
////////////////////////////////////////////////////////////////////////////////////////////////////

$longquestion1 = "Please write down a paragraph about yourself.";
$longexplain1 = "For example, a bit about your experience in this area.";

////////////////////////////////////////////////////////////////////////////////////////////////
////// END OF CUSTOMIZATION ////////////////////////////////////////////////////////////////////
/////  DO NOT CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING!!! ////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////

// #######################################################################
// ######################## START MAIN SCRIPT ############################
// #######################################################################
if ($_REQUEST['action'] == '')
{
  $_REQUEST['action'] = "form";
}


$bbuserinfo = $vbulletin->userinfo;

// start navbar
$navbits = array();
$navbits['newthread.php?' . $vbulletin->session->vars['sessionurl'] . "do=$formname"] = $formtitle;

$navbits = construct_navbits($navbits);
eval('$navbar = "' . fetch_template('navbar') . '";');

if ($_REQUEST['action'] == "submit")
{

    if ($answerall == "1")
    {
        if ($normalanswer1 == '' OR $normalanswer2 == '' OR $dropquestion1 == '' OR $radioanswer1 == '' OR $radioanswer2 == '' OR $radioanswer3 == '' OR $answer1 == '' OR $answer2 == '' OR $answer3 == '' OR $longanswer1 == '')
        {
            $errormessage = "$bbuserinfo[username], you need to answer every question!";
            eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
            exit();
        }
    }

    $vbulletin->input->clean_array_gpc('p', array(
        'wysiwyg'            => TYPE_BOOL,
        'message'            => TYPE_STR
        ));
           
    if ($vbulletin->GPC['wysiwyg'])
    {
        require_once(DIR . '/includes/functions_wysiwyg.php');
        $longanswer1 = convert_wysiwyg_html_to_bbcode($vbulletin->GPC['message'], $foruminfo['allowhtml']);
    }
    else
    {
        $longanswer1 =& $vbulletin->GPC['message'];
    }
           
    eval('$formsend = "' . fetch_template("$answertemplate") . '";');

    if ($formforum == "1")
    {
        $foruminfo = verify_id('forum', $formforumid, 0, 1);
        $forumperms = fetch_permissions($foruminfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = '1';
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('thread', $foruminfo, array(), array(), $newpost, $errors);

        if ($formpoll == "1")
        {
            $threadinfo = verify_id('thread', $newpost[threadid], 0, 1);
            $polloptions = count($polloption);
            $question = $posttitle;
            $vbulletin->GPC['options'] = $polloption;

            $counter = 0;

            $optioncount = 0;
            $badoption = '';
            while ($counter++ < $polloptions)
            { // 0..Pollnum-1 we want, as arrays start with 0
                if ($vbulletin->options['maxpolllength'] AND vbstrlen($vbulletin->GPC['options']["$counter"]) > $vbulletin->options['maxpolllength'])
                {
                    $badoption .= iif($badoption, ', ') . $counter;
                }
                if (!empty($vbulletin->GPC['options']["$counter"]))
                {
                    $optioncount++;
                }
            }

            // Add the poll
            $poll =& datamanager_init('Poll', $vbulletin, ERRTYPE_STANDARD);

            $counter = 0;
            while ($counter++ < $polloptions)
            {
                if ($vbulletin->GPC['options']["$counter"] != '')
                {
                    $poll->set_option($vbulletin->GPC['options']["$counter"]);
                }
            }

            $poll->set('question',    $question);
            $poll->set('dateline',    TIMENOW);
            $poll->set('active',    '1');

            $pollid = $poll->save();
            //end create new poll

            // update thread
            $threadman =& datamanager_init('Thread', $vbulletin, ERRTYPE_STANDARD, 'threadpost');
            $threadman->set_existing($threadinfo);
            $threadman->set('pollid', $pollid);
            $threadman->save();

        }
    }

    if ($formreply == "1")
    {
        $threadinfo = verify_id('thread', $formreplythreadid, 0, 1);
        $forumperms = fetch_permissions($threadinfo[forumid]);
        $newpost['message'] =& $formsend;
        $newpost['title'] =& $posttitle;
        $newpost['parseurl'] = "1";
        $newpost['emailupdate'] = '9999';

        if ($vbulletin->userinfo['signature'] != '')
        {
            $newpost['signature'] = '1';
        }
        else
        {
            $newpost['signature'] = '0';
        }

        build_new_post('reply', $foruminfo, $threadinfo, $postinfo, $newpost, $errors);
    }

    if ($formpm == "1")
    {
        $vbulletin->GPC['message'] =& $formsend;
        $vbulletin->GPC['title'] =& $posttitle;
        $vbulletin->GPC['recipients'] =& $formpmname;

        $pm['message'] =& $vbulletin->GPC['message'];
        $pm['title'] =& $vbulletin->GPC['title'];
        $pm['recipients'] =& $vbulletin->GPC['recipients'];


        // create the DM to do error checking and insert the new PM
        $pmdm =& datamanager_init('PM', $vbulletin, ERRTYPE_ARRAY);

        $pmdm->set('fromuserid', $vbulletin->userinfo['userid']);
        $pmdm->set('fromusername', $vbulletin->userinfo['username']);
        $pmdm->setr('title', $pm['title']);
        $pmdm->setr('message', $pm['message']);
        $pmdm->set_recipients($pm['recipients'], $permissions);
        $pmdm->set('dateline', TIMENOW);

        // everything's good!
        $pmdm->save();
    }

    if ($formemail == "1")
    {
        vbmail($formemailaddress, $posttitle, $formsend);
    }

    if ($redirectoption == "1")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "2")
    {
        $vbulletin->url = 'showthread.php?' . $vbulletin->session->vars['sessionurl'] . "t=$newpost[threadid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "3")
    {
        $vbulletin->url = 'forumdisplay.php?' . $vbulletin->session->vars['sessionurl'] . "f=$foruminfo[forumid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    if ($redirectoption == "4")
    {
        $vbulletin->url = 'editpost.php?do=editpost&' . $vbulletin->session->vars['sessionurl'] . "p=$newpost[postid]";
        eval(print_standard_redirect('redirect_postthanks'));
        exit();
    }
    eval('print_output("' . fetch_template('STANDARD_ERROR') . '");');
    exit();
}

if ($_REQUEST['action'] == 'form')
{
              // set message box width to usercp size
            $stylevar['messagewidth'] = $stylevar['messagewidth_usercp'];
            $dontusewysiwyg = 1;
            $editorid = construct_edit_toolbar();

  eval('print_output("' . fetch_template("$maintemplate") . '");');
}
}
You are missing a comma after
Quote:
'answer2' => TYPE_STR

Ramsesx 12-06-2005 01:22 PM
Quote:
Originally Posted by Abe1
You are missing a comma after
That's it, thanks Abe.

lanc3lot 12-06-2005 03:01 PM
Can i see any shot / demo for this?

Searched the thread but no luck :(

PtP 12-06-2005 09:15 PM
Code:
One thing I would love to do is force the form to use a particular style rather than the default one that the forums are using, what would be the easiest way to archieve this?
So nobody else has needed this feature? I have hosted forums on my server and would love to use this for projects on the hosted forums using their style rather than my default style.

Abe1 12-07-2005 12:43 PM
Version 3.1:
  • Brought back the standard text box (longanswer)

I also renamed what the vbtext box now uses. $vbtextquestion, $vbtextexplain, and $vbtextanswer are used for the vb text editor box.

fabianv 12-07-2005 04:45 PM
I tried adding a second form on vb 3.5.1 but it wont work when I access

/newthread.php?do=form2

Where did I make my mistake?

Abe1 12-07-2005 04:52 PM
1) templatetype should not be changed.

2) formanswers template should be renamed formanswers2

fabianv 12-07-2005 07:49 PM
Thank you for taking the time to help me.

Everything works perfectly now!

Abe1 12-07-2005 07:54 PM
Quote:
Originally Posted by fabianv
Thank you for taking the time to help me.

Everything works perfectly now!
NP. The 2 problems were stairing me in the face. From the time you posted, my reply was 7 min. later. How much time could it have taken :)

djlotus 12-07-2005 08:38 PM
Thanks so much fro the update.

Skyline_GT 12-07-2005 09:33 PM
Quote:
Originally Posted by Abe1
Can you PM your plug-in? Make sure to wrap it in php tags.
can you give me more details??

lanc3lot 12-08-2005 08:26 AM
Hm demo / ss?

Abe1 12-08-2005 12:17 PM
Quote:
Originally Posted by lanc3lot
Hm demo / ss?
I posted a picture in the main post.

lanc3lot 12-08-2005 12:40 PM
Thnx, going to install it now :)

Martyjp 12-08-2005 02:07 PM
Got it all working now :)

One request, is it at all possible to make the polls that the form creates public so its possible to see who voted rather than having to go into the admincp each time?

Abe1 12-08-2005 05:30 PM
Quote:
Originally Posted by Martyjp
Got it all working now :)

One request, is it at all possible to make the polls that the form creates public so its possible to see who voted rather than having to go into the admincp each time?
I'll try to give that otpion for next version.

2fast4ya 12-08-2005 05:40 PM
can this be hooked into the "create new thread" button in the forums for certain forums. For instance... i have a website that users can buy, sell, and trade domain names, and this would be useful if i can hook it into that button. But make it different for each forum. could that be done? Specifically to a CERTAIN forum? if so, how?

Abe1 12-08-2005 06:41 PM
Quote:
Originally Posted by 2fast4ya
can this be hooked into the "create new thread" button in the forums for certain forums. For instance... i have a website that users can buy, sell, and trade domain names, and this would be useful if i can hook it into that button. But make it different for each forum. could that be done? Specifically to a CERTAIN forum? if so, how?
I may try to make an add on to this hack doing something like this.

websiteicons.co 12-08-2005 06:47 PM
Quote:
Originally Posted by 2fast4ya
can this be hooked into the "create new thread" button in the forums for certain forums. For instance... i have a website that users can buy, sell, and trade domain names, and this would be useful if i can hook it into that button. But make it different for each forum. could that be done? Specifically to a CERTAIN forum? if so, how?
I was going to ask the same question. I also have a site where users can buy, sell or trade domains etc...


All times are GMT. The time now is 11:34 AM.
Page 8 of 28 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.02446 seconds
  • Memory Usage 2,423KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (3)bbcode_code_printable
  • (4)bbcode_php_printable
  • (21)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (1)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete