vb.org Archive

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 4.x Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=245)
-   -   Anti-Spam Options - [GlowHost] Spam-O-Matic - Spam Firewall stops forum spam (https://vborg.vbsupport.ru/showthread.php?t=248042)

TheSupportForum 10-15-2012 12:54 PM

Quote:

Originally Posted by JakeSully (Post 2373129)
Hi everyone idk if anyone have already found a fix for this error about TYPE=MyISAM; '); line if not to fix it just open .xml file with notepad++ and remove all the TYPE=MyISAM; '); lines you can find it should look like this

Code:

) TYPE=MyISAM; ');
remove only TYPE=MyISAM; '); leave the ) where it is then save and re-import the .xml and you will see that import will be a success :) just did that on my forum and import went through fine :P

P.S new problem doing that will not get tables created for some strange reason :/

lol go back a few pages, which you should of done in the first place,
myself including many have already posted this info

look here
https://vborg.vbsupport.ru/showpost....postcount=2096
https://vborg.vbsupport.ru/showpost....postcount=2097

there are plenty more

squidsk 10-15-2012 04:00 PM

Incidentally, it is probably a bad idea to remove the Type=MyISM as that creates the tables using the default table type that is set for mysql, this is not guaranteed to by MyISM. The better option is to change Type=MyISM to Engine=MyISM as this removes the error and preserves the table type as the author intended.

john_rsd 10-16-2012 11:56 AM

After installing Spam-O-Matic I found that I couldn't post new threads or replies on my board.

Goes to a HTTP 500 Error.

Found that by disabling the items below I can then post OK.

Quote:

GlowHost - Spam-O-Matic: Replies Control postdata_presave
GlowHost - Spam-O-Matic: AKISMET SPAM filter newpost_process
GlowHost - Spam-O-Matic: First Post/Thread Control threadfpdata_presave
Any ideas where I'm going wrong?

My Hattiesburg 10-16-2012 08:39 PM

I installed this last night, and already everyone on the board is impressed with it! Good job!

achouza 10-16-2012 10:49 PM

I installed this plugin and added a bunch of bad words that are being blocked successfully.

However when a user enters the bad words in the title of a new post (and not in the body) the plugin does not block that post.

Is this inline with everybody elses experience? Is there any way so that the bad word block also applied to the titles?
Thanks!

ForceHSS 10-16-2012 11:24 PM

Quote:

Originally Posted by achouza (Post 2373578)
I installed this plugin and added a bunch of bad words that are being blocked successfully.

However when a user enters the bad words in the title of a new post (and not in the body) the plugin does not block that post.

Is this inline with everybody elses experience? Is there any way so that the bad word block also applied to the titles?
Thanks!

use the Censorship Options for words will work better

AlpineZone 10-17-2012 02:40 PM

Does anyone get false positives on this? Is there a way to remove all US based IP's.

Also; do you need to go to a specific post and click Glowhost, or can I just "delete posts as spam" right from the main forum page?

ForceHSS 10-17-2012 03:42 PM

Quote:

Originally Posted by AlpineZone (Post 2373752)
Does anyone get false positives on this? Is there a way to remove all US based IP's.

Also; do you need to go to a specific post and click Glowhost, or can I just "delete posts as spam" right from the main forum page?

clicking glowhost sends it to there db and in turn builds it up so it stops more spammers. Disable username so you dont get the false positives

john_rsd 10-17-2012 07:52 PM

Quote:

Originally Posted by john_rsd (Post 2373420)
After installing Spam-O-Matic I found that I couldn't post new threads or replies on my board.

Goes to a HTTP 500 Error.

Found that by disabling the items below I can then post OK.

Any ideas where I'm going wrong?

Anyone?

I also don't get any Glowhost details in the Statistics and I'm set as a SuperAdmin.

Tried upgrading Vbulletin to the latest version and uninstalling Spam-O-Matic then re-installing but no luck.

On a plus note I've had no spammers register (that I know of) in the past 24 hours.

TheSupportForum 10-17-2012 08:32 PM

Quote:

Originally Posted by john_rsd (Post 2373846)
Anyone?

I also don't get any Glowhost details in the Statistics and I'm set as a SuperAdmin.

Tried upgrading Vbulletin to the latest version and uninstalling Spam-O-Matic then re-installing but no luck.

On a plus note I've had no spammers register (that I know of) in the past 24 hours.

spammers are not going to contantly register on your sites 24/7

i get hit 2 maybe 3 a week, sometimes 7 in 1 day
it depends on bot activity too

iputinwork 10-18-2012 02:46 AM

I'm having an issue that shows glowhostspamomatic_stats table cannot be found. Error Number : 1146

I've checked the phpmyadmin and I don't see any glowhostspamomatic table either. I've uninstalled and re-installed it but no joy.

killerford 10-19-2012 01:10 AM

I think this might be blocking way to much. A lot of members that want to come in to apply for our clan seems to be getting banned or moderated also. Anyone know what the settings need to be so it's not banning or moderating everything?

Syxguns 10-19-2012 01:41 AM

Quote:

Originally Posted by killerford (Post 2374139)
I think this might be blocking way to much. A lot of members that want to come in to apply for our clan seems to be getting banned or moderated also. Anyone know what the settings need to be so it's not banning or moderating everything?

First do NOT check usernames. That will help a lot. You may still have a few that are blocked because they use a proxy. If the proxy IP is registered with stop forum spam, then your user will need to register with their standard IP address. Not having usernames selected should help.

Turn off auto moderation if you do not want posts to be moderated.:up:

john_rsd 10-19-2012 10:36 AM

Quote:

Originally Posted by simonhind (Post 2373852)
spammers are not going to contantly register on your sites 24/7

Seems that no one can Register on my site, that's one way to stop the spammers. :)

It just goes to a HTTP 500 error like my message before about posting and replying, looks like I'm out, will have to uninstall this and try something else. :(

Vick98 10-19-2012 10:37 AM

For some reason newly registered users are not put in the Newbie usergroup. So they are not being moderated. Any suggestion why this may be happening?

ForceHSS 10-19-2012 01:47 PM

Quote:

Originally Posted by john_rsd (Post 2374210)
Seems that no one can Register on my site, that's one way to stop the spammers. :)

It just goes to a HTTP 500 error like my message before about posting and replying, looks like I'm out, will have to uninstall this and try something else. :(

looks like you have not installed in right

ForceHSS 10-19-2012 01:47 PM

Quote:

Originally Posted by Vick98 (Post 2374212)
For some reason newly registered users are not put in the Newbie usergroup. So they are not being moderated. Any suggestion why this may be happening?

make sure you dont let them register from facebook

DFish 10-19-2012 04:42 PM

Great mod I'm sure, but I'm getting this error:

Quote:

Warning: require_once(includes/functions_ghsom.php) [function.require-once]: failed to open stream: No such file or directory in [path]/includes/functions_newpost.php(532) : eval()'d code on line 11

Fatal error: require_once() [function.require]: Failed opening required 'includes/functions_ghsom.php' (include_path='.:/usr/lib/php5') in /homepages/0/d331508155/htdocs/SHQvB/includes/functions_newpost.php(532) : eval()'d code on line 11
Anyone know what I should do?

john_rsd 10-19-2012 08:30 PM

Quote:

Originally Posted by ForceHSS (Post 2374257)
looks like you have not installed in right

Seems so, tried installing, uninstalling, reinstalling, updating vbulletin but all with the same result.

Not much else I can do but give up and move on..... :confused:

ForceHSS 10-19-2012 09:32 PM

Quote:

Originally Posted by john_rsd (Post 2374345)
Seems so, tried installing, uninstalling, reinstalling, updating vbulletin but all with the same result.

Not much else I can do but give up and move on..... :confused:

why give up, tells us what you did step by step

ForceHSS 10-19-2012 09:32 PM

Quote:

Originally Posted by DFish (Post 2374299)
Great mod I'm sure, but I'm getting this error:



Anyone know what I should do?

you need to upload the files

john_rsd 10-20-2012 07:01 AM

Quote:

Originally Posted by ForceHSS (Post 2374370)
why give up, tells us what you did step by step

I've installed the MOD as per the instructions in the first post here.

Checked that the allow_url_fopen is active by uploading an info.php file and running this and it says its enabled.

Get the SPAM-O-MATIC option in "Control Panel, Settings, Options" and also in the Plug In manager.

No option listed under "Statistics & Logs"

There is a Stats option shown on the forum page above the Who's Online but no stats listed.

At this point no one can post new threads (goes to a HTTP 500 Error) or replies unless I disable:

GlowHost - Spam-O-Matic: Replies Control postdata_presave
GlowHost - Spam-O-Matic: AKISMET SPAM filter newpost_process
GlowHost - Spam-O-Matic: First Post/Thread Control threadfpdata_presave


Then noticed that no one could register (HTTP 500 error) unless I disabled these options too.

Don't know what else to do at this point.

One thing I was thinking it maybe could be is that the AdminCP & ModCP folders are renamed to something else on my board.

Maybe this could be something to do with it?

It's really just new registrations I'm bothered about as the forum is just used for downloading service support items, happy to moderate each registration but it would be good if the spammers were all just sent to where they belong.

TheSupportForum 10-20-2012 07:11 AM

Quote:

Originally Posted by john_rsd (Post 2374456)
I've installed the MOD as per the instructions in the first post here.

Checked that the allow_url_fopen is active by uploading an info.php file and running this and it says its enabled.

Get the SPAM-O-MATIC option in "Control Panel, Settings, Options" and also in the Plug In manager.

No option listed under "Statistics & Logs"

There is a Stats option shown on the forum page above the Who's Online but no stats listed.

At this point no one can post new threads (goes to a HTTP 500 Error) or replies unless I disable:

GlowHost - Spam-O-Matic: Replies Control postdata_presave
GlowHost - Spam-O-Matic: AKISMET SPAM filter newpost_process
GlowHost - Spam-O-Matic: First Post/Thread Control threadfpdata_presave


Then noticed that no one could register (HTTP 500 error) unless I disabled these options too.

Don't know what else to do at this point.

One thing I was thinking it maybe could be is that the AdminCP & ModCP folders are renamed to something else on my board.

Maybe this could be something to do with it?

It's really just new registrations I'm bothered about as the forum is just used for downloading service support items, happy to moderate each registration but it would be good if the spammers were all just sent to where they belong.

the admincp folder in GlowHost_-_Spam-O-Matic_v2.0.2_VB4\upload
all files within that should be placed in your renamed admincp folder
its common knowledge

john_rsd 10-20-2012 10:56 AM

Quote:

Originally Posted by simonhind (Post 2374458)
the admincp folder in GlowHost_-_Spam-O-Matic_v2.0.2_VB4\upload
all files within that should be placed in your renamed admincp folder
its common knowledge

Many thanks :up:

Seems to have done the trick, now have Glowhost in the Status & Logs and I can post with it running.

Krusty1231 10-21-2012 05:13 AM

Quote:

About Spam-O-Matic 2.0:
Spam-O-Matic 2.0 is a spam firewall for your vBulletin Forums version 4.x and later. It prevents known spammers from registering on your forums. If they can't register, they can't spam! This data comes from the stopforumspam.com spammer database.
I just wanted to ask something about this fantastic mod.

On my forum we allow unregistered guests to post in certain forums. (It uses a captcha system) and I do believe this mod is responsible for catching those spam attempts, and auto deleting them. (Even tho they are NOT registering or attempting to)

Every once in awhile we get a legit message that goes to moderation (as I want it to) but the 100's of others (all spam) never make it to moderation and are deleted automatically.

The footer stats in the WGO box indicate that:

392 Spammers Denied Registration
959 Spammy Posts Automatically Moderated

One of those unexpected happenings I noticed this mod is doing.

Fantastic work.....lol.....it is this mod doing that right?

Vick98 10-22-2012 04:22 AM

Quote:

Originally Posted by Vick98 (Post 2374212)
For some reason newly registered users are not put in the Newbie usergroup. So they are not being moderated. Any suggestion why this may be happening?

Quote:

Originally Posted by ForceHSS (Post 2374258)
make sure you dont let them register from facebook




I have Facebook registration disabled. New registered user are not being moderated and placed in the newbie user group. Any suggestions?

ForceHSS 10-22-2012 05:30 PM

check custom plugins

TheSupportForum 10-22-2012 09:08 PM

Quote:

Originally Posted by Vick98 (Post 2374959)
I have Facebook registration disabled. New registered user are not being moderated and placed in the newbie user group. Any suggestions?

create a copy of Registered User, give slightly less permissions
then if there legit move them to registered users

spammers are using blog posts, so i suggest a newbie group with blog posting turned off

SnaKe |WiH| 10-23-2012 10:11 AM

First, Thank you for this plugin!

I have the plugin installed and set up with keys from both Akismet and Stopforum. I believe the plugin is working because I see 3 new accounts to moderate in the admincp (even though I don't have moderate users enabled in vb settings).

I don't see the stats showing up in the forums though when I look at the footer. Also, I put the "Give thanks" in the copyright, but I don't see it ( I also tried footer)....and I really want to get that in their to give thanks!

Thank you for any help
SnaKe
www.warishellgaming.com

Jonm 10-24-2012 11:35 AM

I've had over 100 new spamming members join up over the last few weeks, it seems this mod is missing quite a few now.....

www.staffs-vw.co.uk

Sushubh 10-24-2012 01:40 PM

right. same behavior here. they do not post. but tons of weird name appearing as new members:

bdizzycjniory742
agregoraspitay3555
Alencysewcesk
apittyswft3204
bolgaumaaleya5726
aamexiguoume66

most of them are using yahoo mail. i wonder what has changed!

fly 10-24-2012 02:19 PM

Weird. I barely have any spammers get through at all. Are you (hopefully) using other human verification?

mgmuranaka 10-24-2012 05:16 PM

I am getting the following error when I try to delete posts:

Parse error: syntax error, unexpected T_STRING in /home/seismi7/public_html/forum/includes/class_core.php(4637) : eval()'d code on line 4

I haven't found a solution to fix this. Any ideas?

TheSupportForum 10-24-2012 05:22 PM

Quote:

Originally Posted by mgmuranaka (Post 2375694)
I am getting the following error when I try to delete posts:

Parse error: syntax error, unexpected T_STRING in /home/seismi7/public_html/forum/includes/class_core.php(4637) : eval()'d code on line 4

I haven't found a solution to fix this. Any ideas?

disable this mod first then try again
see if you get the same error, if you do you know its not [GlowHost] Spam-O-Matic

mgmuranaka 10-24-2012 05:25 PM

Thanks for response Simon, I've tried that already and the error is definitely coming from SpamOMatic

mgmuranaka 10-24-2012 05:32 PM

Also, how do I use the Easy Cleanup tools?

Jonm 10-24-2012 07:02 PM

Quote:

Originally Posted by Sushubh (Post 2375627)
right. same behavior here. they do not post. but tons of weird name appearing as new members:

bdizzycjniory742
agregoraspitay3555
Alencysewcesk
apittyswft3204
bolgaumaaleya5726
aamexiguoume66

most of them are using yahoo mail. i wonder what has changed!

look similar to some of the new members I'm getting

Meestor_X 10-24-2012 07:37 PM

Quote:

D) Newbies Manager
Should you decide to enable this option, you can create a new usergroup and then tell Spam-O-Matic about it. Once SOM knows about this usergroup, and once enabled, all new users will be part of the Newbies group. The idea here is that you make a Newbies group that has limited forum permissions. For example, no signatures, no BB code, no images, and etc. This group is created completely in the vB admincp. Spam-O-Matic simply makes it the graduation process to the normal Registered Users group, automatic.
AFAIK, it's not possible in the AdminCP to make a usergroup that bans BB code, much as I really wish I could! It's a forum-wide setting only.
So, how can I do this?

djbaxter 10-24-2012 11:27 PM

Quote:

Originally Posted by Jonm (Post 2375618)
I've had over 100 new spamming members join up over the last few weeks, it seems this mod is missing quite a few now.....

www.staffs-vw.co.uk

Quote:

Originally Posted by Sushubh (Post 2375627)
right. same behavior here. they do not post. but tons of weird name appearing as new members:

bdizzycjniory742
agregoraspitay3555
Alencysewcesk
apittyswft3204
bolgaumaaleya5726
aamexiguoume66

most of them are using yahoo mail. i wonder what has changed!

Quote:

Originally Posted by Jonm (Post 2375713)
look similar to some of the new members I'm getting

Those are bots, either from a botnet or spoofing addresses and IPs that are not in the database.

Add the Spammers suck! mod - it will work in tandem with SFS to stop bots even when they're not yet in the database.

My Hattiesburg 10-26-2012 01:29 AM

When the spammer's post gets moderated, it's not showing in the regular moderation queue. Does it send it to another queue that I don't know about?


All times are GMT. The time now is 12:41 AM.

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.08354 seconds
  • Memory Usage 1,857KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (1)bbcode_code_printable
  • (27)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (3)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 

Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 

Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete