Originally Posted by KevinL (Post 2328460)

Hello,

Did you read all my posts? Without the edit it it doubles the blocks. Even using the Li Ul

So any suggestions?

Originally Posted by almannai (Post 2328476)

Yes I red all your posts. Must be something wrong either with your forums or the code you changed in the mod. If it is doing this with everyone using the mod nobody would use it! Don't you think so?

You can send to me the block code if you have some special block that is giving you trouble.


Regards,

Originally Posted by KevinL (Post 2328501)

Sent a message.

Thanks :)

Originally Posted by chrisngrod (Post 2329992)

I don't know why it took me so long to notice this. Maybe it was after the 4.1.12 update...

On a user's profile page (even though sidebar is set to no), their profile picture will not display if Everywhere Sidebar is enabled.

If I disable it, it displays properly. Same behavior on the default theme as well.


Upgraded to 1.5.1 and on custom pages the sidebar showed up on the right (I have it set to left) and the content of the page was hidden below somewhere. I had an ad that played a movie so I know it was in there somewhere but hidden.

Downgraded to 1.5.

I really do need to upgrade to Gold. I've seen slow on everything :-(.

Originally Posted by gremrock (Post 2330202)

This is a wonderful add-on thanks

Originally Posted by almannai (Post 2330392)

Sorry for the late response....

Does downgrading fix the profile page on your forum?
You can control sidebar position from the mod options.
To get faster response you can contact me by hitting http://vbfixer.com/posting.php?mode=post&f=5 then select other from the radio buttons and write your message.

My apologies again for slow response.



you are welcome

Originally Posted by chrisngrod (Post 2330421)

I'm sorry that probably sounded rude. I meant I've been slow to order addons,but I will probably start with that Adsense mod.

The downgrade fixed the problem with the sidebar being on the right side and the content being hidden below it on custom pages. It is configured to be on the left.

On the profile page it just displays the default unknown picture with a question mark. Does this mean it's breaking the profile image variable? Calling it from a template that isn't configured forint or something?

Thanks

Originally Posted by chrisngrod (Post 2330448)

Sure thing... What all do you need from me? Login?

If you go to my profile (http://www.cricketusers.com/members/chrisngrod.html), I should have a picture. In chrome it comes up without, IE loads the unknown image.

Here is default theme and on/off comparison. I guess it does this with the avatar on that page as well.

https://vborg.vbsupport.ru/attachmen...1&d=1337353611

Originally Posted by almannai (Post 2330480)

Is it possible to allow for setting the default style? As the forum is on custom style.

Originally Posted by firebrand media (Post 2330494)

I was about to hack my template to add sidebar to the thread views, but if this works, it's worth the $29.
But I'm totally confused about what to install and where to get it.
The "gold" version is the paid version?
The free version is out of date?

Bottom line: I suspect it's faster for me to modify my template and add the sidebar to the other views than navigate this thread and order something that may not work in my heavily modified theme.

Originally Posted by chrisngrod (Post 2330533)

http://www.cricketusers.com/forum.php?styleid=1

You can use that link kind sir.

Originally Posted by firebrand media (Post 2330494)

I was about to hack my template to add sidebar to the thread views, but if this works, it's worth the $29.
But I'm totally confused about what to install and where to get it.
The "gold" version is the paid version?
The free version is out of date?

Bottom line: I suspect it's faster for me to modify my template and add the sidebar to the other views than navigate this thread and order something that may not work in my heavily modified theme.

Originally Posted by CaneInsider (Post 2330671)

How do you fix the space between the forum block and the forum. I have a gap thats about 50 px wide. I would like for it to only be a couple pix as it is pushing a part of my 300x250 advert off the screen.

Originally Posted by almannai (Post 2330689)

https://vborg.vbsupport.ru/showpost....postcount=1532

it is 20 change it as you like

:)

Originally Posted by CaneInsider (Post 2330706)

Ok, I changed the product-everywhere_sidebar_1.5.1.xml script to say;

intval($vbulletin->options['esidebar_width'])+1)

in like 10 locations and reuploaded it into the plugin manager selecting overwrite and nothing happened. I also cleared my browser and site cache just in case. Any other suggestion?

Originally Posted by almannai (Post 2330709)

hmmm...

Have you changed all instance?

Originally Posted by b3zra1y (Post 2330718)

Hi all -
MY QUESTIONS ARE:

1) Can I hide/remove the title of the box? That takes up space and I don't need a title.
2) Can I remove the surrounding box/border?
3) There's a wide space between my ESB column and my forum area (about 60px). I used firebug to try to find out why. Any pointers?

Others may've asked this, but there are so many thread now for ESB... I can't find it.
THANKS

Originally Posted by CaneInsider (Post 2330724)

I changed it 23 times. Searched the entire xml doc for

intval($vbulletin->options['esidebar_width'])+

Is there anywhere else it should be changed?

Originally Posted by b3zra1y (Post 2330763)

Thanks for the prompt response. BUT...

I uninstalled the product... then I replaced the occurrences of...
intval($vbulletin->options['esidebar_width'])+20
with...
intval($vbulletin->options['esidebar_width'])+10

But I still have a large gap.
My test site is here:
http://fox.arvixe.com/~b3zra1y2/forums/forum.php

The gap was NOT present until I selected the option in 'Settings/Options' to selected 'yes' on the 'Don't Hide ESB Switch'.

WHAT AM I MISSING ?

>> You can't find what??
sorry , i meant that i couldn't find guidance on how to do this.

Originally Posted by almannai (Post 2330739)

1.No
2.No
3 https://vborg.vbsupport.ru/showpost....postcount=1532

You can't find what??



No it is 23.

Things you may try
1. uninstall the product
2. If you edited the mod templates manually you need to remove them
3.Install the new changed product.

Originally Posted by b3zra1y (Post 2330763)

Thanks for the prompt response. BUT...

I uninstalled the product... then I replaced the occurrences of...
intval($vbulletin->options['esidebar_width'])+20
with...
intval($vbulletin->options['esidebar_width'])+10

But I still have a large gap.

The gap was NOT present until I selected the option in 'Settings/Options' to selected 'yes' on the 'Don't Hide ESB Switch'.

WHAT AM I MISSING ?

>> You can't find what??
sorry , i meant that i couldn't find guidance on how to do this.

Originally Posted by CaneInsider (Post 2330781)

Got it. Thank you. Had to adjust the forum block width in the Admin CP > Options > ESB Options

Now how do I get the gap between each object in the forum block down. Lots of white space between each Item I have to get rid of.

Originally Posted by chrisngrod (Post 2331129)

Latest 5.1.2 displays correctly on my custom pages. Not sure what was changed but thanks. Enjoying your Adsense product as well.

Originally Posted by chrisngrod (Post 2331129)

Latest 5.1.2 displays correctly on my custom pages. Not sure what was changed but thanks. Enjoying your Adsense product as well.

Originally Posted by CaneInsider (Post 2331159)

Thank you sir! Much Better. Great Mod!!

Originally Posted by dannycutts (Post 2331733)

does this work with 4.2?

Does it display the sidebar on the whats new page?

Originally Posted by dannycutts (Post 2331733)

does this work with 4.2?

Does it display the sidebar on the whats new page?

Originally Posted by Damsella (Post 2331893)

I came on here to ask the same question! Will it work on the Activity Stream page?

4.2 is very new, so maybe it doesn't work yet.

But I love Everywhere Sidebar and will not upgrade until it does!

Originally Posted by dannycutts (Post 2332152)

the old version works with 4.2... I dare not try the new version till someone else has....lol

Danny

4.2 seems to be rapid quick now :-)

Originally Posted by dannycutts (Post 2332152)

the old version works with 4.2... I dare not try the new version till someone else has....lol

Danny

4.2 seems to be rapid quick now :-)

Originally Posted by olalaaa (Post 2332547)

i installed the 1.5.1 and uploaded the css. but it aint working, i dont see anything.. i have a custome template tho.

i did a few steps of the custom but i didnt get were the temper was so i just gave up

Originally Posted by hiker (Post 2332601)

How can I auto hide the sidebar for users viewing at a low resolution? Say 1024 X768?

I've hidden the collapse switch, and I don't want complaints coming from those members saying it's made the main content window too small.

Originally Posted by SemperFideles (Post 2332682)

Version 1.5.2 of the product "works" with vBulletin 4.2 with one caveat. There is a new activity stream feature added (activity.php) and there is no way to enable sidebar for the Activity Stream from the settings.

Originally Posted by almannai (Post 2332706)

It will be included in the future for now you can add it as acustom page !!