vb.org Archive - [Release] - [Gamma] - Round Quotes with Images

Page 4 of 6

« First

Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)

- vBulletin 3.0 Template Modifications (https://vborg.vbsupport.ru/forumdisplay.php?f=134)

- - [Release] - [Gamma] - Round Quotes with Images (https://vborg.vbsupport.ru/showthread.php?t=88280)

mrsbuzzy

01-20-2004 02:27 PM

I have 2 questions regarding this modification.

1) will it be compatable with "vBulletin Version 3.0.0 Release Candidate 2"

and

2) can the quote box be made wider at a set size? Say 400 pixels or maybe bigger?

I'm trying to incorporate it onto these forums http://www.parent-2-parent.com/forum/index.php? and would like the quotes to all be the same width, but larger.

Thanks!
Dawn

StarBuG

01-20-2004 08:28 PM

Works fine for RC2 no problems at all.

to 2) I just got a quick look for size definitions and it seems dynamical
You could change the % size in the < table > tags to your desired width ( minus the fix sizes for the grafics left, right and middle for quote or quote with name)
(It wouldn?t always be the EXACT same size cause a longer username add?s more px to the width then a shorter you only could make a fix size for the quote with name box as well that is wide enough to fit your largest username but I don?t think if this would look good)

Then it should fit fine into your forum

Greetings

StarBuG

ps: I hope this makes sence cause I?m totaly stoned :D

Oblivion Knight

01-23-2004 05:41 PM

Installed and working great on RC3, thanks Dexter.. :)

gmarik

02-01-2004 07:20 PM

Oblivion Knight Which one did you installed?

Elmer

02-01-2004 09:22 PM

Hi gmarik,
Install the gamma version
http://www.vbulletintemplates.com/mo...achmentid=3186 ;)

btekcan

02-07-2004 03:49 PM

İs it workıng on RC3 ?

Elmer

02-07-2004 04:17 PM

Quote:

Originally Posted by turkeyforum

İs it workıng on RC3 ?

Yes, it is. Go ahead try it out ;)

btekcan

02-07-2004 05:25 PM

Yesssss,it is worked now...

Thanks

ImportPassion

02-13-2004 03:48 PM

and rc4?

btekcan

02-13-2004 03:54 PM

Yes worked,my board version now RC4,and working without any problem.

Thansk

MKN	03-03-2004 09:50 AM

Nice :)

How did You make the "quote button" in this forum?

Also, how to avoid crappy look, when U quote a post with a quote?

ImportPassion

03-03-2004 09:52 AM

Quote:

Originally Posted by Dexter

Yes, it is. Go ahead try it out ;)

wanted to test the quote in a quote

MKN	03-03-2004 11:23 AM

Actually, don?t think U can as such..

But the prob is, that if You have to copy/paste a poste with a quote, and quote that contens in a post, the gfx looks awefull.

Sorta like this...

Quote:

Quote:
Originally Posted by Dexter

Yes, it is. Go ahead try it out

wanted to test the quote in a quote

/Edit***

Wierd, at my testforum it also quotes bits of the quoted gfx but very offset offcause.

rebelsrock06

03-04-2004 01:17 AM

how do i do this for RC4

rebelsrock06

03-13-2004 04:12 AM

how can i set the text to ALWAYS be black

Vb-Hispano

03-18-2004 10:16 AM

Dexter podrias hacerlo esto para la firma?

saludos compi

blakkboy

03-22-2004 04:11 AM

which one should i download if i wanted to add this to vb3 gold????

btekcan

03-22-2004 05:38 AM

It is working with RC GOLD version,my forum is working perfectly.

Thanks

owen100

03-23-2004 08:13 PM

I've got it working pretty much OK but you'll see from the attachment that a few of the images are missing!? I did a 404 check on my server and whilst most of the images are being called from images/misc/quotes the missing ones are being called from 'images/misc/quotes - that's'images with a ' so what did I do wrong?

Help appreciated.

vau7	03-30-2004 03:01 AM

And does it work in vb 3.0 too?

Thanks for coding!

btekcan

03-30-2004 05:05 AM

Yes.....I wrote in Post #138 ;) Because My forum is VB3.0.0 Gold

Cheers

HollyRidge

04-05-2004 03:26 AM

Quote:

Originally Posted by Erwin

Fix for the maximages problem

Note that just increasing the maximum number of images in Admin CP is not a good solution because if someone wants to put lots of quotes in their posts, they will hit the maximum - each quote has a minimum of 5 images. 10 quotes would be 50 images.

A better solution is to do this:

In the BBCode section for both Simple and Username Quotes, find in the HTML every instance of:

Code:

<img SRC="images/quotes

And replace with:

Code:

<img WIDTH="15" SRC="images/quotes

and delete the second occurance of WIDTH="15" in each of the img tag.

You do this 5 times in the Simple Quote, and 7 times (I think) in the Quote with Username.

Then, you need to do some hacking - apologies if this is not allowed - it's only a minor hack.

In includes/functions_newpost.php, find:

PHP Code:


		
			
fetch_character_count(parse_bbcode($post['message'], $foruminfo['forumid'], $post['enablesmilies']), '<img') > $vboptions['maximages'])

Replace with:

PHP Code:


		
			
fetch_character_count(parse_bbcode($post['message'], $foruminfo['forumid'], $post['enablesmilies']), '<img src') > $vboptions['maximages'])

That should do it. The quoting images will now NOT be counted as an image in posts. Smilies and other images will still be counted as usual.

Really cool hack but do have 1 question... Where is <img SRC="images/quotes at? I have searched every file and the database as well but cant find any instances of it. If it helps I am running vb3 gold.

ChrisBaktis

04-10-2004 04:32 AM

Great job - took about 2 minutes even for a newbie like myself!

SaN-DeeP

04-14-2004 11:10 PM

hello there,

Worked perfect on vb 3.0 gold too.

One question.

My old POSTS.. Have not changed. those still appear in the old style. ?

I tried a test post and quote it. It appears rounded

But all posts are still on the same default vb 3.0 gold system how to change those too ?

Thnx.

Sandy...

btekcan

04-15-2004 04:02 PM

Be careful......

This code not compatible 3.0.1 !!! Because sometimes when you press quote and post message,message is not own ! New message quote owner.....

btekcan

04-16-2004 11:38 AM

Any comment or report ?

Elmer

04-17-2004 01:34 AM

Quote:

Originally Posted by turkeyforum

Any comment or report ?

I think that the code is compatible with vb3.0.1
however, i have attached a txt file with some minor updates to the table code
you may download it in the first post.

If the code show up errors, please let me know ;)

btekcan

04-17-2004 09:53 AM

Himmmm,I thik it is OK

But I need quote in left side,but now in center.How can I do that ?

Thanks

Elmer

04-17-2004 09:18 PM

Quote:

Originally Posted by turkeyforum

Himmmm,I thik it is OK

But I need quote in left side,but now in center.How can I do that ?

Thanks

In the first <table> tag, look for align="center" and replace it with align="$stylevar[left]" or just align="left"

btekcan

04-18-2004 08:48 PM

Thanks

DenzoForums

04-19-2004 03:14 PM

I am using vb 3.0.1. Is this compatible, i have seen some say yes, and some sya no.
Also, I was trying to install, but in step 3 it says
"3. Look for the "Simple Quoting" section and click Edit "

I son;t have a simple quoting section. It's all blank.. just a button to add new BBcodes.

Should I be adding this as a new BBCode?

Any help is greatly appreciated..

Thanks
Dave

Diva	04-19-2004 04:39 PM

Hi. I am using it on my test site and it is compatible. It's actually very simple to use. Here's the shortened version on step by step instructions:

Admin Control Panel > Styles & Templates > Style Manager > BBCode Layout templates > bbcode_quote > click the 'Edit' button to modify the template an replace the content with the following code:

DenzoForums

04-19-2004 08:12 PM

> bbcode_quote > click the 'Edit' button to modify the template an replace the content with the following code:

I don't have any of this...^^^^

Dave

DenzoForums

05-07-2004 03:48 PM

Quote:

Originally Posted by Diva

OK i finally figured out how to get to the code.. but I ma still lost.
This is what I have in my section..

Code:

 <div style="margin:20px; margin-top:5px; <if condition="$show['iewidthfix']">width: 100%;</if>">

        <div class="smallfont" style="margin-bottom:2px">$vbphrase[quote]:</div>

        <table cellpadding="$stylevar[cellpadding]" cellspacing="0" border="0" width="100%">

        <tr>

                <td class="alt2" style="border:1px inset">

                        <if condition="$show['username']">

                                <div><phrase 1="$username">$vbphrase[originally_posted_by_x]</phrase></div>

                                <div style="font-style:italic">$message</div>

                        <else />

                                $message

                        </if>

                </td>

        </tr>

        </table>

</div>

What should I do with this? I am using VB 3.0.1 I had put in the code in the text file.. but it didn;t work. I then looked and saw to seperate entries.. So now I am lost in step 5 & 6..

Thanks
Dave

Elmer

05-07-2004 06:23 PM

Replace it with the code in the txt file attached here in the first post of this thread.

;)

DenzoForums

05-07-2004 07:28 PM

Quote:

Originally Posted by Dexter

Replace it with the code in the txt file attached here in the first post of this thread.

;)

OK.. I did that .. but it doesn;t seem to be working.

http://www.denzoforums.com/forum/showthread.php?t=157

I pasted the text in there, and i do get the cool quotes box.. but the message is not in that box.. It's below it.. Any ideas?

Thanks
Dave

LOD-squa

05-08-2004 08:44 PM

Nice mod, just what I needed. Good job. :)

:: ??

Elmer

05-10-2004 11:06 PM

Quote:

Originally Posted by DenzoForums

actually the quoted massage it's in there, the thing is that you use white for you font in your forums since you are using a dark style...

Let me find the psd and I will make a dark version to fit dark styles ;)

Zachariah

05-10-2004 11:41 PM

1. Login to your Admin Control Panel
2. look for "Custom BB Codes" on the side menu (go all the way down)
3. Click on the "BB Code Manager" link
4. Look for the "Simple Quoting" section and click Edit

No such monster in my vb3.01 or am I blind

DenzoForums

05-11-2004 01:24 PM

Quote:

Originally Posted by Dexter

Dexter - I see what you mean.. Thank you so much! You are awesome!!

Dave

All times are GMT. The time now is 12:00 AM.

Page 4 of 6

« First

Show 40 post(s) from this thread on one page

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.01438 seconds Memory Usage 1,829KB Queries Executed 10 (?)
More Information
Template Usage: (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (3)bbcode_code_printable (2)bbcode_php_printable (10)bbcode_quote_printable (1)footer (1)gobutton (1)header (1)headinclude (6)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (1)post_thanks_navbar_search (1)printthread (40)printthreadbit (1)spacer_close (1)spacer_open Phrase Groups Available: global postbit showthread	Included Files: ./printthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/class_bbcode_alt.php ./includes/class_bbcode.php ./includes/functions_bigthree.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete printthread_start pagenav_page pagenav_complete bbcode_fetch_tags bbcode_create bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete printthread_post printthread_complete
Messages: