vb.org Archive - Major Additions - [DBTech] DragonByte SEO v2 (vB4)

Page 4 of 31

« First

Last »

Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)

- vBulletin 4.x Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=245)

- - Major Additions - [DBTech] DragonByte SEO v2 (vB4) (https://vborg.vbsupport.ru/showthread.php?t=308615)

franzes80

03-23-2014 05:20 PM

Is very good SEO.thank you DragonByte for your support.VBSEO is Dead and DBSEO is Born.
Very good work in vb 4.2.2 PL 1

1320Nation

03-24-2014 02:05 AM

I installed this on vb4.2.2 PL1 and have a couple minor errors that appear. I think they're showing up from not setting up the .htaccess part correctly. However, I would like to find someone that knows this mod very well and that can help with adjusting settings for it on my site.

Send me a PM if you can help a brother out.

Wiilli

03-24-2014 04:47 PM

Hello,

I purchased the DragonByte SEO for my new Community.
I made the Installation like written in the readme.txt. After installing, I saw the new URL like http://www.domain.de/forum2/ but when I click on the URL I got an 404. I made no changes on the Setting.

THX, WIILLI

ForceHSS

03-28-2014 04:53 AM

Quote:

Originally Posted by Wiilli (Post 2489280)

If you got the pro version go to their site and they will help you

fxdigi-cash

03-29-2014 10:35 PM

Thanks for the great plugin.

for those who use Nginx, you can use these rules as substitute for hack .htaccess:

Code:

if ($uri !~ "(admincp/|dbseocp/|modcp/|cron|mobiquo|forumrunner|api.php)"){

        set $rule_0 1$rule_0;

}

if ($rule_0 = "1"){

        rewrite ^/((archive/)?(.*.php(/.*)?))$ /dbseo.php last;

}

if (!-f $request_filename){

        set $rule_1 1$rule_1;

}

if (!-d $request_filename){

        set $rule_1 2$rule_1;

}

if ($request_filename !~ "/(admincp|dbseocp|modcp|clientscript|cpstyles|images)/"){

        set $rule_1 3$rule_1;

}

if ($rule_1 = "321"){

        rewrite ^/(.+)$ /dbseo.php last;

}

1320Nation

03-31-2014 09:02 PM

After installing this mod I ran into trouble on my board. With no plugins installed accept this one, when attempting to use the "Reply to Thread" in any of the forums, the board freezes into a searching mode. If I then select the Refresh on the Browser it will complete as it should. We tried going through the settings making changes with no luck.

I searched this thread and there doesn't seem to be anyone else that has yet had this issue. Any ideas?

ForceHSS

03-31-2014 09:39 PM

Quote:

Originally Posted by 1320Nation (Post 2490739)

PM sent

DragonByte Tech

04-01-2014 05:57 PM

DragonByte SEO v1.0.9

Changes to Existing Features:

Album pages should now correctly contain canonical URLs
Forum URLs will now retain the "and" stopword if no forum_id is present in the URL format
Announcement URLs will now retain the "and" stopword if no announcement_id is present in the URL format
Blog Entry URLs will now only retain the "and" stopword if no blog_id is present in the URL format
Blog Category URLs will now retain the "and" stopword if no category_id is present in the URL format
Social Group URLs will now retain the "and" stopword if no group_id is present in the URL format
Social Group Discussion URLs will now only retain the "and" stopword if no discussion_id is present in the URL format
Album URLs will now only retain the "and" stopword if no discussion_id is present in the URL format
(vB4) CMS Section URLs will now retain the "and" stopword if no section_id is present in the URL format
(vB4) CMS Category URLs will now retain the "and" stopword if no category_id is present in the URL format
(vB4) CMS Entry URLs will now retain the "and" stopword if no entry_id is present in the URL format

Bug Fixes And Issue Fixes:

The "nofollow" whitelist should now apply correctly
The "nofollow" blacklist should now apply correctly
Thread Titles should now once again link correctly when browsing a post
The "Show Thread: After First Post" social sharing option should now work as intended
(vB4) Including CMS Sections in the Sitemap if none of them are publicly available will no longer generate a database error

DragonByte SEO v1.0.10

Changes to Existing Features:

"No Permission" error screens now send a 403 Access Restricted header
"Go To Post" URLs now redirect to the normal thread URL, improving the canonical URL functionality

Bug Fixes And Issue Fixes:

"Go To Post" URLs now redirect to the normal thread URL
Custom Rewrite Rules would in some circumstances not work as intended
Using the Forum Path system without a forum ID in the path format would create invalid rewritten URLs

Fillip

natecoupons

04-02-2014 06:02 PM

Will this work for vB 3.8.x

DragonByte Tech

04-02-2014 06:11 PM

Although we have a dedicated vB3 version thread here: https://vborg.vbsupport.ru/showthread.php?t=308616 the zip file is identical to the one uploaded to this thread.

Fillip

natecoupons

04-02-2014 06:43 PM

Okay, I'm having massive issues with my links currently....will this plugin keep my URL's the same? In other words, http://www.weusecoupons.com/upload/walgreens WAS working just fine until today. Maybe issues with vbSEO? Then all of a sudden something happened (i have no idea what) and it's now this link: http://www.weusecoupons.com/upload/f25/

with the above link broken.

natecoupons

04-02-2014 07:18 PM

WOW. So I HIGHLY recommend DragonBYTE SEO. My site has over 3 MILLION posts....100,000 members+, we are a BIG busy board. (WeUseCoupons.com). I've run vbSEO for YEARS. Today it died a horrible death. I paid for the lifetime version of DragonBTYE SEO & installation, gave them my server and user creds....30 minutes later my site was back to life, members happy.

I can not say enough that I HIGHLY recommend this plugin for those using vbSEO. It will solve all of your issues. Thank you. Please email me if you have ANY questions about this. nathan.weusecoupons@gmail.com.

Again I can't say enough.

tpearl5

04-02-2014 08:27 PM

Quote:

Originally Posted by natecoupons (Post 2491075)

Why did it die? Are you seeing less server resources consumed with DBSEO?

puertoblack2003

04-04-2014 03:40 AM

any chance you're going to update this to php 5.5 On my test server i'm getting alot of

Code:

"PHP Deprecated:  mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead "

Panthrus

04-04-2014 05:14 AM

Still no nginx oficial support?

I tried both mentioned here (my board is also under /forum/) and didnt work,

Also tried this tool:

http://winginx.com/en/htaccess

no luck.

Anyone got nginx to work with thismod?

fxdigi-cash

04-06-2014 12:38 AM

I wrote down the solution in my previous post here

Quote:

Originally Posted by Panthrus (Post 2491405)

franzes80

04-06-2014 07:20 AM

Hello dragonbyte team in dbseo have bug on sitemap in your product.please fix.The sitemap at first it works then rechecking says not valid
thank you

DragonByte Tech

04-08-2014 10:47 AM

Please check your error log for any errors that may have occurred during cron job generation of the sitemap. You can also try reducing the number of items per page via the DBSEO Control Panel settings :)

Fillip

lapiervb

04-08-2014 11:40 PM

I bought the pro version and had it installed and configured by DB over a month ago. Tonight Im going to have to turn DBSEO off as it has been murdering my server for the entire month, Im getting a lot of complaints the site will not load and server emails hourly that the server load is over 15......

ForceHSS

04-09-2014 12:15 AM

Quote:

Originally Posted by lapiervb (Post 2492190)

If dbtech went in and fixed some settings you should post on there forums and get them to have a look again as they might of just missed some settings

Alan_SP

04-09-2014 09:36 PM

Quote:

Originally Posted by lapiervb (Post 2492190)

Tonight Im going to have to turn DBSEO off as it has been murdering my server for the entire month

This is strange thing.

All mods have some kind of impact, the biggest impact single mod had on my site was DBTechs Advanced Post Thanks and Like prior version 3.2.5, when they optimized it enough so I can use it again on my site.

I'm telling this as I'm using vBSEO at the moment (still), but over time I'll transfer to DBSEO. So big difference in server load means that either your server already was "on the edge" (server load isn't linear) and DBSEO just crossed it, which means you should have stronger server, or something should be better configured, or something in code optimized.

Whatever is, consult with DBTech before you turn off DBSEO, they'll help you, and probably even solve it.

Max Taxable

04-09-2014 09:45 PM

Quote:

Originally Posted by Alan_SP (Post 2492333)

(server load isn't linear) .

A important fact most don't realize.

DragonByte Tech

04-10-2014 06:51 PM

Quote:

Originally Posted by lapiervb (Post 2492190)

We generally can't answer Pro support queries, but as this goes for both Lite and Pro I can answer:

Have you added an opcode cacher other than Filecache to your config.php file? If you install XCache or APC and configure vB to utilise it, DBSEO will also be able to utilise it to reduce server load.

Quote:

Originally Posted by Max Taxable (Post 2492336)

A important fact most don't realize.

In a perfect world, there would be such a thing as a standardisation table for resource consumption vs. hardware, and the server load figures would be replaced with a more comparable performance metric.

What a Single-CPU Core 2 would think is server load 15 probably would be 0.15 on our Dual-CPU Ivy Bridge server, etc.

Fillip

Alan_SP

04-10-2014 08:28 PM

Well, they say that 1 (talking about server load as linux shows it) means 100% server load of one CPU core.

On 4 core CPU having server load of 2 would mean 50% server load for that server. 4 would mean 100% server load for that server. But, even with 6 on my 4 core server (which means 150% server load), my users probably wouldn't notice anything wrong. After 8 (200% server load) things starts to be noticeable to outside world.

Bigger problem is, what's causing this server load, is it some kind of unusual event, or something normal. If it is something normal, it's time for new server, or time to discard some of the mods if we talk about vBulletin based sites.

Macgiber

04-12-2014 03:06 AM

Warning: file_get_contents(..../includes/xml/spiders_dbtech_dbseo.xml) [function.file-get-contents]: failed to open stream: No such file or directory in ..../dbtech/dbseo/includes/class_core.php on line 651

help?

bzcomputers

04-12-2014 04:54 AM

Quote:

Originally Posted by Macgiber (Post 2492759)

spiders_dbtech_dbseo.xml - is one of the files that is suppose to be uploaded. Currently it cannot be located, check to make sure it was uploaded and uploaded to the right location.

Macgiber

04-12-2014 11:17 AM

charged hundreds of times but the file does not appear, only appears vbulletin

Cla75

04-12-2014 01:47 PM

because the "stopwords" are not removed from the link BUT only in part of link for the "title" of the post (not categories and sections)

Max Taxable

04-12-2014 02:30 PM

Quote:

Originally Posted by Macgiber (Post 2492759)

I had this same issue and found that for some reason Filezilla was not allowing upload of this file. I uploaded the file manually thru the file manager in the host and all was good.

Macgiber

04-12-2014 10:07 PM

Database error

Macgiber

04-12-2014 10:08 PM

Database error in vBulletin 4.2.2:

Invalid SQL:

INSERT IGNORE INTO vbdbtech_dbseo_urlhistory
(setting, regexpformat, rawformat)
VALUES(
'Announcement_Announcement',
'forum(\\d+)/announcement(\\d+)\\.html',
'forum%forum_id%/announcement%announcement_id%.html'
);

MySQL Error : Table 'domar76.vbdbtech_dbseo_urlhistory' doesn't exist
Error Number : 1146
Request Date : Saturday, April 12th 2014 @ 04:07:02 PM
Error Date : Saturday, April 12th 2014 @ 04:07:02 PM
Script : http://unknownzone.net/dbseocp/index.php?do=save
Referrer : http://unknownzone.net/dbseocp/index...lrewrite_forum
IP Address : 24.48.210.172
Username : unknown
Classname : vB_Database
MySQL Version : 5.0.96-log

DragonByte Tech

04-12-2014 10:11 PM

Quote:

Originally Posted by Macgiber (Post 2492890)

Database error in vBulletin 4.2.2:

This means the install didn't complete successfully. Please reinstall the product.

Fillip

microscopes

04-13-2014 02:02 PM

I purchased the pro version.

However, under Sitemap File Path settings it says:

Error:
You did not enter a valid value for this setting.

microscopes

04-13-2014 02:18 PM

Also, turning this mod on makes the forum not usable.

Not Found

The requested URL /forum5/ was not found on this server.

Apache Server at www.buffalorange.com Port 80

DragonByte Tech

04-13-2014 02:27 PM

Could you please post Pro support queries in our Pro support forum? We can't support the Pro version here on vB.org, sorry :(

Fillip

Macgiber

04-13-2014 05:16 PM

any way to configure the lite because it gives me error 404 thanks as always

DragonByte Tech

04-13-2014 05:20 PM

Make sure you've applied the .htaccess edit as per the instructions.

Fillip

Macgiber

04-13-2014 05:27 PM

which should I use which is not .htaccess

Macgiber

04-13-2014 05:31 PM

Code:

# RewriteBase /forum/



# If you are having problems with the rewrite from content/ to content.php, uncomment this line to turn MultiViews off.

# Options -MultiViews



RewriteCond %{REQUEST_FILENAME} -f [OR]

RewriteCond %{REQUEST_FILENAME} -l [OR]

RewriteCond %{REQUEST_FILENAME} -d



RewriteRule ^.*$ - [NC,L]



# Forum

RewriteRule ^threads/.* showthread.php [QSA]

RewriteRule ^forums/.* forumdisplay.php [QSA]

RewriteRule ^members/.* member.php [QSA]

RewriteRule ^blogs/.* blog.php [QSA]

RewriteRule ^entries/.* entry.php [QSA]



RewriteCond %{REQUEST_FILENAME} -f [OR]

RewriteCond %{REQUEST_FILENAME} -l [OR]

RewriteCond %{REQUEST_FILENAME} -d



RewriteRule ^.*$ - [NC,L]



# MVC

RewriteRule ^(?:(.*?)(?:/|$))(.*|$)$ $1.php?r=$2 [QSA]



# Check MVC result

RewriteCond %{REQUEST_FILENAME} -f

RewriteRule ^(.*)$ - [NC,L]

RewriteRule ^(.*)$ - [R=404,L]



RewriteCond %{REQUEST_URI} !(admincp/|dbseocp/|modcp/|cron|mobiquo|forumrunner|api\.php)

RewriteRule ^((archive/)?(.*\.php(/.*)?))$ dbseo.php [L,QSA]



RewriteCond %{REQUEST_FILENAME} !-f

RewriteCond %{REQUEST_FILENAME} !-d

RewriteCond %{REQUEST_FILENAME} !/(admincp|dbseocp|modcp|clientscript|cpstyles|images)/

RewriteRule ^(.+)$ dbseo.php [L,QSA]

this is correct for the product?

DragonByte Tech

04-13-2014 05:41 PM

Use this:

Code:

# RewriteBase /forum/



# If you are having problems with the rewrite from content/ to content.php, uncomment this line to turn MultiViews off.

# Options -MultiViews



RewriteCond %{REQUEST_URI} !(admincp/|dbseocp/|modcp/|cron|mobiquo|forumrunner|api\.php)

RewriteRule ^((archive/)?(.*\.php(/.*)?))$ dbseo.php [L,QSA]



RewriteCond %{REQUEST_FILENAME} !-f

RewriteCond %{REQUEST_FILENAME} !-d

RewriteCond %{REQUEST_FILENAME} !/(admincp|dbseocp|modcp|clientscript|cpstyles|images)/

RewriteRule ^(.+)$ dbseo.php [L,QSA]

Fillip

All times are GMT. The time now is 07:33 AM.

Page 4 of 31

« First

Last »

Show 40 post(s) from this thread on one page

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.01757 seconds Memory Usage 1,849KB Queries Executed 10 (?)
More Information
Template Usage: (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (4)bbcode_code_printable (12)bbcode_quote_printable (1)footer (1)gobutton (1)header (1)headinclude (6)option (1)pagenav (1)pagenav_curpage (4)pagenav_pagelink (1)pagenav_pagelinkrel (1)post_thanks_navbar_search (1)printthread (40)printthreadbit (1)spacer_close (1)spacer_open Phrase Groups Available: global postbit showthread	Included Files: ./printthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/class_bbcode_alt.php ./includes/class_bbcode.php ./includes/functions_bigthree.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete printthread_start pagenav_page pagenav_complete bbcode_fetch_tags bbcode_create bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete printthread_post printthread_complete
Messages: