vb.org Archive
Page 4 of 9 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.7 Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=228)
-   -   Mini Mods - Welcome headers - Improve community registration rates (https://vborg.vbsupport.ru/showthread.php?t=165519)

wickedstangs 05-08-2008 07:34 PM
not sure if this is a problem on my end or the upload xml. But, my sendmessage.php is not send_message.php? When I hit contact us it goes to a blank screen had to change it to sendmessage.php.

goddess_dix 05-08-2008 07:37 PM
Quote:
Originally Posted by wickedstangs (Post 1513000)
not sure if this is a problem on my end or the upload xml. But, my sendmessage.php is not send_message.php? When I hit contact us it goes to a blank screen had to change it to sendmessage.php.
this was addressed just a few posts back - https://vborg.vbsupport.ru/showpost....&postcount=111

wickedstangs 05-08-2008 07:42 PM
thank you for the assistance, sorry didnt look a little closer..

Ted S 05-09-2008 04:34 PM
Quote:
Originally Posted by TheInsaneManiac (Post 1512993)
When can you port Limited Guest Viewing?
This thread is about welcome headers. Thank you.

Ted S 05-09-2008 04:34 PM
Quote:
Originally Posted by goddess_dix (Post 1512874)
there are a few that are created by this product, but none by default. perhaps it was trying to reinstall the messages a second time?
Are there any notices showing up in the manager at this time? Did you try and install this previously?

Hornstar 05-09-2008 08:26 PM
Just wondering if the welcome headers message is now placed in line with vbseo recommendations?

Ted S 05-09-2008 09:41 PM
Quote:
Originally Posted by hornstar1337 (Post 1514197)
Just wondering if the welcome headers message is now placed in line with vbseo recommendations?
The notices system (which is built in to vBulletin) shows up above the navbar by default. As I last checked, vbSEO recommends placing it below the navbar and using an image rather than test for any guest message.

Ted S 05-10-2008 01:31 AM
An updated version (5.0.2) has been released which contains a fix in the link for

sendmessage.php. Upgrading is not required, this can be fixed by manually changing the phrase from send_message.php to sendmessage.php.

airborneCAL 05-10-2008 01:38 AM
Quote:
Originally Posted by Ted S (Post 1514473)
Upgrading is not required, this can be fixed by manually changing the phrase from send_message.php to sendmessage.php.
Thanks for that tip.

gettingbetter 05-10-2008 07:04 AM
This mod is by far one of the best I've imported. It helps increase postings from new users (if you know what phrases to use) like crazy! Nice work, forever installed alongside the Notifications function.

Big Boss 05-10-2008 01:22 PM
Thanks for the latest update, Ted. :)

Vinyljunky 05-10-2008 02:51 PM
Excellent mod :up:

Charlie98902 05-11-2008 03:00 AM
Ted my contact us in the guest message isn't working either I even replaced the URL as well.

Ted S 05-11-2008 07:25 AM
Quote:
Originally Posted by Charlie98902 (Post 1515529)
Ted my contact us in the guest message isn't working either I even replaced the URL as well.
Define "isn't working". Where does it take you? What does that page show?

Charlie98902 05-11-2008 12:29 PM
Nothing takes me anywhere, this is in IE 7 as well I should of mentioned. I have yet to test firefox. Here is the notice I used:

Quote:
Welcome to <b>DVD neXt COPY Support Forum</b>.<br />You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our <strong>free</strong> community you will have access to post topics, communicate privately with other members (PM). Registration is fast, simple and absolutely free, <a href="{2}"><strong>join our community today</strong></a>! <br /><br />


Also registered users have more sections they can access as well.<br /><br /> If you have any problems with the registration process or your account login, please contact <a href="{4}"><strong>contact us</strong></a>.
Homepage if needed: http://www.dvdnextcopysupportforum.com

Zagis 05-11-2008 12:35 PM
Hi,

How can I stop showing welcome message to guests only?

Charlie98902 05-11-2008 12:38 PM
Quote:
Originally Posted by Charlie98902 (Post 1515887)
Nothing takes me anywhere, this is in IE 7 as well I should of mentioned. I have yet to test firefox. Here is the notice I used:



Homepage if needed: http://www.dvdnextcopysupportforum.com
Firefox takes me to a bad 404 error page. Just tried. This is on both links.

Charlie98902 05-11-2008 12:40 PM
Quote:
Originally Posted by Zagis (Post 1515893)
Hi,

How can I stop showing welcome message to guests only?
Under the settings drop down box put a check next to registered members except change registered members to not logged in.

AdrianH 05-11-2008 12:44 PM
Quote:
Originally Posted by Charlie98902 (Post 1515897)
Firefox takes me to a bad 404 error page. Just tried. This is on both links.
Hmmm odd that, you are now showing this http://www.dvdnextcopysupportforum.com/%4$s as your contact page.

I altered the address in the notice via ACP but you can do it in the .php file.

Charlie98902 05-11-2008 01:29 PM
That was using the notices & not a php file. I may have done it wrong?

AdrianH 05-11-2008 01:41 PM
If in doubt Ted has added an updated file,just download and import the new version which has the corrected code.

Charlie98902 05-11-2008 01:50 PM
I just installed this last night so I think I do have the newer version? Can we use bbcode in place of html on this too? This might be an option for me?

Charlie98902 05-11-2008 02:35 PM
BBCODE don't work but I did manage to alter the HTML for the 2 links so I am good to go now.

Ted S 05-11-2008 05:00 PM
Quote:
Originally Posted by Charlie98902 (Post 1515887)
Nothing takes me anywhere, this is in IE 7 as well I should of mentioned. I have yet to test firefox. Here is the notice I used:
When I click "Contact Us" in I.E. 7 it takes me to the contact page correctly located at http://www.dvdnextcopysupportforum.com/sendmessage.php.

Charlie98902 05-11-2008 05:22 PM
Thanks Ted this is a great mod just needed to learn HTML a bit more. I have changed it since my initial post and confirmed it is working. I just used a different html method than prior.

Zagis 05-12-2008 12:06 PM
Quote:
Originally Posted by Charlie98902 (Post 1515902)
Under the settings drop down box put a check next to registered members except change registered members to not logged in.
I'm sorry, didn't get you... Which settings do you mean?

Zagis 05-12-2008 12:28 PM
Never mind I found it, thanks :)

mark|3 05-22-2008 09:27 AM
I've upgraded my board and followed the steps. But now I am not able to display the message. Any idea why?

Ted S 05-22-2008 02:28 PM
Quote:
Originally Posted by mark|3 (Post 1527720)
I've upgraded my board and followed the steps. But now I am not able to display the message. Any idea why?
You'll need to be more specific on this. Do you have any notices showing up in your notices manager? Have you reverted or changed your templates to include the notices variable?

mark|3 05-22-2008 03:09 PM
Under Notices Manger I have "Guest" targeting the guest.
I have not changed or reverted my template since the update. Did I miss out anything?
Thanks

Quote:
Originally Posted by Ted S (Post 1528017)
You'll need to be more specific on this. Do you have any notices showing up in your notices manager? Have you reverted or changed your templates to include the notices variable?

carteretpeople 05-22-2008 05:25 PM
anyway of showing currently active users online in a welcome the notice

3.73

Ted S 05-22-2008 09:42 PM
Quote:
Originally Posted by mark|3 (Post 1528052)
Under Notices Manger I have "Guest" targeting the guest.
I have not changed or reverted my template since the update. Did I miss out anything?
Thanks
Well that explains it! They've added a new bit of code to the navbar template which you'll need to add:

HTML Code:
<if condition="$show['notices']">
 <table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
 <tr>
  <td class="thead">$vbphrase[notices]</td>
 </tr>
 <tr>
  <td class="alt1">$notices</td>
 </tr>
 </table>
 <br />
</if>
Anywhere near the end of the file is fine.

HobaZ 05-22-2008 10:30 PM
amazing , installed

mark|3 05-23-2008 06:55 AM
Quote:
Originally Posted by Ted S (Post 1528380)
Well that explains it! They've added a new bit of code to the navbar template which you'll need to add:
Anywhere near the end of the file is fine.

thanks ted works like a charm :D

carteretpeople 05-23-2008 09:31 PM
hi mark,

Is there a way to get the totalonline users to show in a notice.
do i have to down these files in this thread for that to work

thanks in advance

rob

carteretpeople 05-23-2008 09:35 PM
Is there a way to show the totalusers on line in the notice?

If so please help im stupid
Thanks..

Quote:
Originally Posted by HobaZ (Post 1528409)
amazing , installed

carteretpeople 05-24-2008 02:37 AM
i got it

Ted S 05-24-2008 03:57 AM
Glad you figured it out.

rknight111 05-24-2008 04:39 PM
I tried to install 2 times to my forum, and Its doesn't display in my admid CP so I cannot set it up. Anyone else have this issue.

RON

Ted S 05-24-2008 10:10 PM
Quote:
Originally Posted by rknight111 (Post 1530184)
I tried to install 2 times to my forum, and Its doesn't display in my admid CP so I cannot set it up. Anyone else have this issue.

RON
Do you have any notices in the notices manager?


All times are GMT. The time now is 09:48 PM.
Page 4 of 9 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.01649 seconds
  • Memory Usage 1,823KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (1)bbcode_html_printable
  • (18)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete