vb.org Archive

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.0 Full Releases (https://vborg.vbsupport.ru/forumdisplay.php?f=33)
-   -   NNTP Gateway for Usenet ( Newsgroups ), Mailing Lists (https://vborg.vbsupport.ru/showthread.php?t=65152)

lierduh 07-22-2004 09:32 PM

Quote:

Originally Posted by Taco John
Got this error:

Gateway version 2.1.0 1 group(s) gatewayed.
Could not connect to NNTP-serverNot connectedNot connected


What am I doing wrong? I'm trying to connect to alt.sports.football.pro.denver-broncos

As the message says, the gateway can not connect to the server. You might like to read the third post in this thread for debugging purpose.

Cold Steel 07-23-2004 05:10 PM

Gateway.php is regularly causing the server to have loads of 30+ when it's called.

I'm running 2.1.1 of this script, and 3.0.1 vBulletin. I have three newsgroups. http://forums.asiansinc.com/forumdisplay.php?f=71

Are there any settings or any changes that I can make to prevent the high server loads?

lierduh 07-24-2004 01:58 AM

Quote:

Originally Posted by john_rsd
I just send you login and account by PM ;)

The password did not work for me when I tried telnet into the server.

-ERR authorization failed

lierduh 07-24-2004 02:09 AM

Quote:

Originally Posted by Cold Steel
Gateway.php is regularly causing the server to have loads of 30+ when it's called.

I'm running 2.1.1 of this script, and 3.0.1 vBulletin. I have three newsgroups. http://forums.asiansinc.com/forumdisplay.php?f=71

Are there any settings or any changes that I can make to prevent the high server loads?

Basically the script continuesly imports the messages. So the load could be higher than the usual user posts. It needs to build the search index etc. and other server intensive tasks.

For slower servers, you can slow down the script by insert this line

sleep (3);

Just before

} //for each message loop

(should be around line 518)

That will pause 3 seconds after each message is retrieved.

Also how often do you run the script? If you are using the vB built-in cron scheduler, normall it only allows you to run one task each hour. You can create two or more of the same scheduled tasks running in different times of the hour.

trackpads 07-25-2004 01:07 AM

Quote:

Originally Posted by lierduh
Basically the script continuesly imports the messages. So the load could be higher than the usual user posts. It needs to build the search index etc. and other server intensive tasks.

For slower servers, you can slow down the script by insert this line

sleep (3);

Just before

} //for each message loop

(should be around line 518)

That will pause 3 seconds after each message is retrieved.

Also how often do you run the script? If you are using the vB built-in cron scheduler, normall it only allows you to run one task each hour. You can create two or more of the same scheduled tasks running in different times of the hour.

Hey again!

Is there a way to make the script skip to the next message in a newsgroup if it fails on the last one?

For example, sometimes the script will stop working because of an error importing a single message and I wont realize it for a few days.

It might be better to just have it automatically skip to the next message or whatnot to prevent this?

Thanks again for all the great work!

-Jason

Cold Steel 07-25-2004 08:02 AM

Quote:

Originally Posted by lierduh
Basically the script continuesly imports the messages. So the load could be higher than the usual user posts. It needs to build the search index etc. and other server intensive tasks.

For slower servers, you can slow down the script by insert this line

sleep (3);

Just before

} //for each message loop

(should be around line 518)

That will pause 3 seconds after each message is retrieved.

Also how often do you run the script? If you are using the vB built-in cron scheduler, normall it only allows you to run one task each hour. You can create two or more of the same scheduled tasks running in different times of the hour.

Thanks. I don't think the server is that slow, but I've made the change anyway.

I had the script running every ten minutes via cPanel cron (couldn't figure out how to work vB cron), but I've cut it back to every half hour.

Thanks again!

lierduh 07-25-2004 08:11 AM

Quote:

Originally Posted by trackpads
Hey again!

Is there a way to make the script skip to the next message in a newsgroup if it fails on the last one?

For example, sometimes the script will stop working because of an error importing a single message and I wont realize it for a few days.

It might be better to just have it automatically skip to the next message or whatnot to prevent this?

Thanks again for all the great work!

-Jason

This is a good idea. Will include this in the next version.:)

Sanjiyan 07-25-2004 12:12 PM

Can I ask what is the prefix part of the mailing list options (in admincp) are for?

kkiely 07-25-2004 03:46 PM

anyone know what this error is


Database error in vBulletin :

Link-ID == false, connect failed
mysql error:

mysql error number: 0

Date: Friday 16th of July 2004 03:06:00 PM
Script: http://
Referer:
IP Address:


i get these occasionally but my board seems to be working fine

---------
this was a different error i got on a board after i installed the hack but didnt completely test it

Database error in vBulletin :

Invalid SQL:
SELECT title, data FROM datastore
WHERE title IN ('options', 'cron', 'forumcache', 'usergroupcache', 'stylecache', 'smiliecache', 'bbcodecache', 'attachmentcache')

mysql error: Lost connection to MySQL server during query

mysql error number: 2013

Date: Friday 16th of July 2004 12:12:24 PM
Script: http://www.yourgov.org/newreply.php?...noquote=1&p=37
Referer: http://www.yourgov.org/showthread.php?t=24
IP Address: 65.213.77.129

john_rsd 07-25-2004 04:42 PM

Quote:

Originally Posted by lierduh
The password did not work for me when I tried telnet into the server.

-ERR authorization failed

Sorry, I made small error on username :o

Details fixed and send by PM


All times are GMT. The time now is 12:41 AM.

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.01881 seconds
  • Memory Usage 1,751KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (7)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (3)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (10)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 

Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 

Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete