vb.org Archive
Page 20 of 26 « First 101819 20 2122 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.0 Full Releases (https://vborg.vbsupport.ru/forumdisplay.php?f=33)
-   -   NNTP Gateway for Usenet ( Newsgroups ), Mailing Lists (https://vborg.vbsupport.ru/showthread.php?t=65152)

lierduh 02-05-2005 09:35 PM
Have you ruled out the server only lets you access one group at a time?



Quote:
Originally Posted by infiniterb
lierduh,

I'm still having my issue that I posted above. I can get posts to show up on my forums, and I can successfully post. I am using the Scheduled Tasks in vb and it works fine. However, all is working fine for only the first forum in the list. I'm currently using the following groups in this order:

24hoursupport.helpdesk
alt.privacy.spyware
microsoft.public.security
microsoft.public.windows.inetexplorer.ie6.browser
microsoft.public.windowsxp.basics
microsoft.public.windowsxp.general
microsoft.public.windowsxp.help_and_support
microsoft.public.windowsxp.security_admin

All groups are enabled, and are using a personal newshosting.com account I have set up with posting access. When gateway.php runs via the scheduled tasks, it hits the first group on the list, and updates it with the new posts from the NG. I have gateway.php set to hit the groups listed above every 15 min (I've played with different times, and nothing seems to work).

Any idea why only the first group in my list will update? I've even set the first group to disabled, which allows the 2nd group to update just fine and allow posting, however the 3rd group on down are not updated. It'd be a real pain to have to enable/disable groups manually.

infiniterb 02-05-2005 09:48 PM
I have not. I was wondering if anyone else had similar issues, or if this were something you had come across.

recumbent615 02-06-2005 04:05 AM
I have recently installed this mod on my upgraded VB V3.0.6 . I had been using the same mod on my old VB 2.x install. I use it as a Mailing list gateway and it is much improved over the older VB2 version.

I have noticed that it does not seem to do the right thing when it reads a message that is a reply ( to the mailing list ) to an exsisting thread that does not contain a References header. I had read in some posts that others had seen this issue last year, and I believe that KevinM had a patch. My question is, did that not work? is that why it was not incorproated into the latest released version?

I just did not want to apply a mod to the mod if it does not work?

Thanks for any feed back on this issue.

Kevin B

ART 02-06-2005 02:47 PM
Quote:
Originally Posted by lierduh
You should be able to upgrade from v2 version automatically by opening up the two control panel pages once.

No the posts already exported will not be exported again.
Thanks lierduh, in the meantime I did the update - and all went smoothly :)

and thanks for the work - the new gateway runs perfect for me!

recumbent615 02-08-2005 12:23 AM
Quote:
Originally Posted by recumbent615
I have recently installed this mod on my upgraded VB V3.0.6 . I had been using the same mod on my old VB 2.x install. I use it as a Mailing list gateway and it is much improved over the older VB2 version.

I have noticed that it does not seem to do the right thing when it reads a message that is a reply ( to the mailing list ) to an exsisting thread that does not contain a References header. I had read in some posts that others had seen this issue last year, and I believe that KevinM had a patch. My question is, did that not work? is that why it was not incorproated into the latest released version?

I just did not want to apply a mod to the mod if it does not work?

Thanks for any feed back on this issue.

Kevin B

Here is an example of the problem: See the attached Image Issue.gif

and the headers from the Second line of that Image that did not get threaded correctly

Code:
Return-path: <exim-users-bounces+eximlist=exim-users.org@exim.org>
Envelope-to: eximlist@exim-users.org
Delivery-date: Mon, 07 Feb 2005 18:37:46 -0500
Received: from sesame.csx.cam.ac.uk ([131.111.8.41])
    by hpserver.kmb.com with esmtp (Exim 4.42)
    id 1CyIRs-0007Mi-Td
    for eximlist@exim-users.org; Mon, 07 Feb 2005 18:37:46 -0500
Received: from [::1] (port=1855 helo=sesame.csx.cam.ac.uk)
    by sesame.csx.cam.ac.uk with esmtp (Exim 4.44)
    id 1CyHaK-0003hx-8O; Mon, 07 Feb 2005 22:42:24 +0000
Received: from 82-68-67-219.dsl.in-addr.zen.co.uk ([82.68.67.219]:18657
    helo=openbsd.rigwam.net)
    by sesame.csx.cam.ac.uk with esmtp (Exim 4.44) id 1CyHaG-0003h3-97
    for exim-users@exim.org; Mon, 07 Feb 2005 22:42:21 +0000
Received: from [10.10.1.54] (helo=onion)
    by openbsd.rigwam.net with esmtp (Exim 3.36 #1) id 1CyHaF-00032c-00
    for exim-users@exim.org; Mon, 07 Feb 2005 22:42:19 +0000
From: "Rob Stead" <admin@robstead.co.uk>
To: <exim-users@exim.org>
Subject: RE: [exim] SMTP forwards with EXIM
Date: Mon, 7 Feb 2005 22:41:59 -0000
MIME-Version: 1.0
Content-Type: text/plain;
    charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Office Outlook, Build 11.0.6353
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
In-Reply-To: <be7b2f3f05020713231dd52103@mail.gmail.com>
Thread-Index: AcUNW18ukIiI7c5VSbWoXxZWrBT8OQACIBcg
Message-Id: <E1CyHaF-00032c-00@openbsd.rigwam.net>
X-Spam-Score: -4.9 (----)
X-BeenThere: exim-users@exim.org
X-Mailman-Version: 2.1.5
Precedence: list
Reply-To: admin@robstead.co.uk
List-Id: A user list for the exim MTA <exim-users.exim.org>
List-Unsubscribe: <http://www.exim.org/mailman/listinfo/exim-users>,
    <mailto:exim-users-request@exim.org?subject=unsubscribe>
List-Archive: <http://www.exim.org/mail-archives/exim-users>
List-Post: <mailto:exim-users@exim.org>
List-Help: <mailto:exim-users-request@exim.org?subject=help>
List-Subscribe: <http://www.exim.org/mailman/listinfo/exim-users>,
    <mailto:exim-users-request@exim.org?subject=subscribe>
Sender: exim-users-bounces@exim.org
Errors-To: exim-users-bounces+eximlist=exim-users.org@exim.org
X-AV-Scan: This message has been scanned by ClamAV via KMB.COM
X-Spam-KMB-Score: 0.1 : /
Note that the Subject is RE: but there is not References Tag in the header. I thought that this hack would first look for the Reference line in the header and if it could not fine one it would then try to match on Subject ( after removing the RE: )

Is it possible that there is a setting that I have missed or need to add to get this MOD to thread both ways ?

Thanks

Kevin

recumbent615 02-08-2005 01:04 AM
I beliieve that I found the answer to my Question, and Yes I was Missing a setting. Thread_by_subject was set to "0", I was under the impression that setting that would forego the use of the References header information. After reading the code some I see that this is not the case, I turned on this switch and eveything seems to work correctly. The only question I have is am I miss reading the code and setting my self up for a mess?

Thanks
Kevin

BilldaCat 02-09-2005 02:48 PM
Quote:
Originally Posted by Izze_de
exactly same problem for me.
all newsgroups are counted double.
normal forum threads just once.

and this is a clear, just one testpost, user- and hackfree (except this one) forum.
brand new installed.
Confirming this problem as well on my boards. Has anyone found a fix?

infiniterb 02-10-2005 06:56 PM
Quote:
Originally Posted by infiniterb
I have not. I was wondering if anyone else had similar issues, or if this were something you had come across.
Ok, I spoke with my host and he's saying there's nothing on their end that should prevent the gateway.php from accessing more than one group at a time. So, lierduh, I'm ruling out that my web hosts server allows only one group to be accessed at one time.

Any other ideas?

Marv 02-11-2005 07:32 AM
Quote:
Originally Posted by lierduh
If you have many newsgroup forums. You can put all your local forums under one main forum. [...]

/search.php?do=getnew&forumid=1
(1 is the main forum id for all your local forums)
Thanks lierduh - that did the trick :up:

SaN-DeeP 02-15-2005 09:55 AM
Quote:
Originally Posted by SaN-DeeP
1. Messages are getting imported twice.. in all forums.

2. Username appears weird in many imported messages.

(*Check attachment for more details)

Regards,
sorry for bumping again, still looking for a solution.

Regards,

AWS 02-15-2005 04:39 PM
Have you checked the newsgroup? Usenet posts when using a newsreader don't get posted right away. The poster might have posted and didn't see it appear and posted again.
I don't know what is cauing the weird username. Maybe a bug in the persons news reader.

SaN-DeeP 02-15-2005 04:59 PM
Quote:
Originally Posted by AWS
Have you checked the newsgroup? Usenet posts when using a newsreader don't get posted right away. The poster might have posted and didn't see it appear and posted again.
I don't know what is cauing the weird username. Maybe a bug in the persons news reader.
I have checked couple of times about this problem but not able to debug...
When importing from newsgroups, couple of messages gets imported twice or thrice as well the weird username problem appears while browsing those forums.

Regards,

BilldaCat 02-16-2005 06:27 PM
Quote:
Originally Posted by BilldaCat
Confirming this problem as well on my boards. Has anyone found a fix?
bumping this again, still looking for a solution.

(posts being counted twice in total count)

lierduh 02-21-2005 03:15 AM
Quote:
Originally Posted by BilldaCat
Confirming this problem as well on my boards. Has anyone found a fix?
Will fix this non-critical problem before next release. I need to set up a test forum to debug. In the meantime, please use the counter-reset function.

lierduh 02-21-2005 03:17 AM
Quote:
Originally Posted by infiniterb
Ok, I spoke with my host and he's saying there's nothing on their end that should prevent the gateway.php from accessing more than one group at a time. So, lierduh, I'm ruling out that my web hosts server allows only one group to be accessed at one time.

Any other ideas?
Have you checked with NNTP server host instead of web host?

lierduh 02-21-2005 03:24 AM
Quote:
Originally Posted by SaN-DeeP
I have checked couple of times about this problem but not able to debug...
When importing from newsgroups, couple of messages gets imported twice or thrice as well the weird username problem appears while browsing those forums.

Regards,
Not sure why it gets imported twice. Have you confirmed this with a normal news reader?

Weird user name problem is caused by other language encoding in the user name. The script has ability to decode, make sure your php server has "imap_mime_header_decode" function.

SaN-DeeP 02-22-2005 10:15 AM
Quote:
Originally Posted by lierduh
Not sure why it gets imported twice. Have you confirmed this with a normal news reader?

Weird user name problem is caused by other language encoding in the user name. The script has ability to decode, make sure your php server has "imap_mime_header_decode" function.
"imap_mime_header_decode" function is enabled on server.
I checked the message with normal news readers, only 1 message appears in news reader.

Slave 02-23-2005 08:24 AM
Just installed .. worked like a charm .. :)

joeMJ 02-28-2005 10:38 AM
Hello,

I installed this script as recommended. Port 119 is open and it synchronized Newsgroup (with some ISO/ encoding problems) the newsgroup in my forums. I'd like to synchronize msnews, microsoft.public.de.smartphone.

Server is Win2003, Web Edition, actual php and mysql.

Link to NG=>VB Forums is here

Problem:

I answered a post in the newsgroup (as you see here).
Then I manually started gateway.php

Errormessage I get, when I started gateway.php:

Code:
Datenbankfehler in vBulletin 3.0.7:

Ungueltige SQL-Abfrage:
                        SELECT email, field1 AS signature, usertitle, customtitle
                        FROM user AS user
                        LEFT JOIN userfield AS userfield
                        ON user.userid = userfield.userid
                        WHERE user.userid = 1
               
mysql error: Unknown column 'field1' in 'field list'

mysql error number: 1054

Datum: 28.02.2005 13:07:43
Skript: http://www.mobilejoe.de/joeforums/gateway.php
Referer:
Benutzername: joe
IP-Adresse: 217.84.8.114
debug=1:

Code:
Gateway version 2.3.2  1 group(s) gatewayed.

Connecting to server, server says: 200 NNTP Service 6.0.3790.206 Version: 6.0.3790.206 Posting Allowed

Info for microsoft.public.de.smartphone at msnews.microsoft.com: 211 137 1040 1212 microsoft.public.de.smartphone

<html><head><title>mobilejoe.de Datenbankfehler</title><style type="text/css"><!--.error { font: 11px tahoma, verdana, arial, sans-serif; }--></style></head>
<body></table></td></tr></table></form>
<blockquote><p class="error">&nbsp;</p><p class="error"><b>Es trat ein Problem mit der mobilejoe.de Datenbank auf.</b><br />
Bitte versuchen Sie es erneut, indem Sie die Seite neu laden (<a href="javascript:window.location=window.location;">Aktualisieren, Refresh, Reload</a> usw. im Browser klicken).</p><p class="error">Eine E-Mail wurde an den <a href="mailto:joe@mobilejoe.de">Technischen Administrator</a> geschickt, den Sie ebenfalls kontaktieren k?nnen, falls das Problem weiterhin auftritt.</p><p class="error">Wir entschuldigen uns f?r die Unannehmlichkeiten.</p><form><textarea class="error" rows="15" cols="100" wrap="off">Datenbankfehler in vBulletin 3.0.7:

Ungueltige SQL-Abfrage:
                        SELECT email, field1 AS signature, usertitle, customtitle
                        FROM user AS user
                        LEFT JOIN userfield AS userfield
                        ON user.userid = userfield.userid
                        WHERE user.userid = 1
               
mysql error: Unknown column 'field1' in 'field list'

mysql error number: 1054

Datum: 28.02.2005 14:55:25
Skript: http://www.mobilejoe.de/joeforums/gateway.php?debug=1
Referer:
Benutzername: joe
IP-Adresse: 217.84.8.114
</textarea></form></blockquote>

</body></html>
(screenshot below)

Can please anyone help me in that problem?


Thank you very much!
cheers
joe

lierduh 02-28-2005 07:18 PM
Quote:
Originally Posted by joeMJ
Hello,
Code:
Datenbankfehler in vBulletin 3.0.7:

Ungueltige SQL-Abfrage:
                        SELECT email, field1 AS signature, usertitle, customtitle
                        FROM user AS user
                        LEFT JOIN userfield AS userfield
                        ON user.userid = userfield.userid
                        WHERE user.userid = 1
               
mysql error: Unknown column 'field1' in 'field list'

mysql error number: 1054

Datum: 28.02.2005 13:07:43
Skript: http://www.mobilejoe.de/joeforums/gateway.php
Referer:
Benutzername: joe
IP-Adresse: 217.84.8.114
joe
Basically it says 'field1' field is not presented in your 'userfield' table. I can't explain why you don't. You can check whether you have 'userfield' table, and is there 'field1' in this table. 'field1' stores the signature of the users. Failing that, you can alway turn off the signature in the settings, or in the post interface.

joeMJ 02-28-2005 07:46 PM
Ah oops. As I queried phpMyadmin, I don't have this field - I got 2,3,8 and 9, where 2 is city and so on. I disabled Signature in NNTP Settings Menu, but no success - I still get

Datenbankfehler in vBulletin 3.0.7:

Code:
Ungueltige SQL-Abfrage:
                        SELECT email, field1 AS signature, usertitle, customtitle
                        FROM user AS user
                        LEFT JOIN userfield AS userfield
                        ON user.userid = userfield.userid
                        WHERE user.userid = 1
               
mysql error: Unknown column 'field1' in 'field list'

mysql error number: 1054

Datum: 28.02.2005 22:26:20
Skript: http://www.mobilejoe.de/joeforums/gateway.php
Referer:
Benutzername: joe
IP-Adresse: 217.84.8.114
The signature is stored in usertextfield - "signature" ... As I am not as good in this - any way to change gateway.php to match these tables in VBulletin I'm using? BTW - It's an out of the box VB3.07 - no changes, hacks, whatever... :surprised:

lierduh 02-28-2005 08:29 PM
Quote:
Originally Posted by joeMJ
Ah oops. As I queried phpMyadmin, I don't have this field - I got 2,3,8 and 9, where 2 is city and so on. I disabled Signature in NNTP Settings Menu, but no success - I still get

Datenbankfehler in vBulletin 3.0.7:

Code:
Ungueltige SQL-Abfrage:
                        SELECT email, field1 AS signature, usertitle, customtitle
                        FROM user AS user
                        LEFT JOIN userfield AS userfield
                        ON user.userid = userfield.userid
                        WHERE user.userid = 1
               
mysql error: Unknown column 'field1' in 'field list'

mysql error number: 1054

Datum: 28.02.2005 22:26:20
Skript: http://www.mobilejoe.de/joeforums/gateway.php
Referer:
Benutzername: joe
IP-Adresse: 217.84.8.114
The signature is stored in usertextfield - "signature" ... As I am not as good in this - any way to change gateway.php to match these tables in VBulletin I'm using? BTW - It's an out of the box VB3.07 - no changes, hacks, whatever... :surprised:
Actually my file has the field name changed already. I can't remember when and why. Anyway, use this attached file instead, and you should be fine.

joeMJ 02-28-2005 08:54 PM
It works! :D Thank you sooo much !

Odoin 03-01-2005 03:49 AM
Could someone get this:
Code:
https://vborg.vbsupport.ru/showthread.php?t=60329
to work with the NNTP mod? I am willing to pay money...

ironlogik 03-05-2005 04:02 AM
hi there

can someone explain why none of the threads are actually showing on the forumdisply.php page? i see the thread and post counts on the forumhome (index), and if i click the thread name in the "last post" column on forumhome, it takes me to the thread no problem. its just not listing the damn threads on the forumdisply page.

please help. thanks.

you can see what its doing at: www.toyotanation.com/forum/

ironlogik 03-05-2005 01:42 PM
n/m problem solved.

it was the modified forumdisply.php from the "Warning System" hack

working perfectly.

BTW - news.astraweb.com is awesome!

gmtalk 03-09-2005 06:54 PM
Is there a way to tie usernames that I pull from yahoo groups or even newsgroups to existing members? I am testing a few feeds out on our test server that has a copy of all users from the live server. Several of our members post on the yahoo, nntp and the forum. I would like to get those members posts from the nntp and yahoo lists tied to their forum name.

I did try the vb built in one, but since the poster is "guest" it is not allowing it.

Any thoughts on this?

BilldaCat 03-09-2005 07:02 PM
When replying to a thread, the 'title' field is left blank. Did I mess up some setting, or is there a way to auto-populate that with 'Re: the-topic-being-discussed'?

Thanks!

amphicar770 03-16-2005 05:14 PM
I have a noob question but first wanted to say that this is an AWESOME hack. I will be using the email gateway to help in transitioning from YahooGroup to VB.

Anyway, for the following instruction under gateway settings I have to confess to having no clue what it means. My site is ammphicar770.com and I have set up a dedicated mailbox at that domain for exchange of the Yahoogroups message. Just have no clue what I should or should not enter for the following setting ...

This domain is used for the msgid of the outgoing post and also for the email address sent to the newsgroups. In the future, I plan to impliment a time limited email address system so replys can go from email to PM. To avoid spams attempting at your server. Please do not use a resolvable domain.
Email address domain email no-mx.amphicarforum.amphicar770.com

Thanks.

Marv 03-21-2005 03:45 PM
Hi,

I don?t know wether I?m the only one having this problem but I wouldappreciate if someone could give me a hint, where and how I could fixthis.

In my forums all posts appear as they should. That means theusenet-code is getting parsed into vb-code, spaces, blanklines..all topnotch.
My problem is the reversed parsing, means vb-code parsed into usenet-code and the appearing in the usenet.

A forum post which looks like this:
Quote:
This is an example post and in this it has another quoted partlike that:
Quote:
Originally Posted by Marv
Quoted message goes here. If this one has morethen 72 signs it becomes word wrapped as it should..
normal text would go on here and (if long enough) becomes wrapped and parsed in the next line as normal and non-quoted text..
In the usenet post it shows up like this:
Quote:
This is an example post and in this it has another quoted part like that:

In his post Marv mentioned:
> Quoted message goes here. If this one has more then 72 signs
> it becomes word wrapped as it should..normal text would go on here and
(if long enough) becomes wrapped and parsed in the next line as normal and not-quoted text..
instead of
Quote:
This is an example post and in this it has another quoted part like that:

In his post Marv mentioned:
> Quoted message goes here. If this one has more then 72 signs
> it becomes word wrapped as it should..
[blank line]
normal text would go on here and (if long enough) becomes wrapped
and parsed in the next line as normal and not-quoted text..
So, it seems that a seperater is missing somewhere and reading of thoseusenet posts via newsreader really becomes a mess if you have a fewqoutes in it beside long text. I?ve tried to fix that on my own but Icouldn?t find out where I?ld have to insert the </br> .

Could someone do me the favor to have a look into the gateway.php ? May be I was just to blind to see..

lierduh 03-21-2005 07:58 PM
Quote:
Originally Posted by Marv
Hi,

I don?t know wether I?m the only one having this problem but I wouldappreciate if someone could give me a hint, where and how I could fixthis.

In my forums all posts appear as they should. That means theusenet-code is getting parsed into vb-code, spaces, blanklines..all topnotch.
My problem is the reversed parsing, means vb-code parsed into usenet-code and the appearing in the usenet.

A forum post which looks like this:


In the usenet post it shows up like this:


instead of


So, it seems that a seperater is missing somewhere and reading of thoseusenet posts via newsreader really becomes a mess if you have a fewqoutes in it beside long text. I?ve tried to fix that on my own but Icouldn?t find out where I?ld have to insert the </br> .

Could someone do me the favor to have a look into the gateway.php ? May be I was just to blind to see..
This occures when someone replies to the quote straight after the vbcode. eg. Instead of writing the reply in the new line. They reply was written like like:
PHP Code:
...[/QUOTE]Reply was here 
I will check the code out in a few days.

Marv 03-21-2005 09:32 PM
Quote:
Originally Posted by lierduh
I will check the code out in a few days.
Thx, lierduh.

mcncyo 03-23-2005 05:20 PM
Is there anyway of putting word that you have in the Censorship Options got to a moderation area. I am try to figure out a good way of stop have spam and sex post put on my christian message board.

szy 03-24-2005 11:29 AM
Hello.

Thanks for your hack, but...

gateway.php seems to do nothing. What should be the reason? Wrong permissions? But - to what? I haven't found any directions about permissions?

This is the URL. All files are transferred to server, MySQL table are created, groups is configured as id=30

Thanks for help,
Szy.

jzewatsky 04-01-2005 03:08 PM
Thank you sooo much for writing and supporting this hack! This is exactly what my forum has needed!


Quote:
Is there anyway of putting word that you have in the Censorship Options got to a moderation area. I am try to figure out a good way of stop have spam and sex post put on my christian message board.
Try the "Global Killfile" setting at the bottom of "NNTP Gateway Settings". If I read the instructions there, you could set the code to look for a word, set of words, string of characters in specific parts of the message. If that/those word(s) are present that message will not be turned into a thread. The text in the box should help you configure it to work the way you want. Hope that helps!

Anyone please correct me if I'm wrong.

Again thanks for the great hack!!!

chas_h 04-04-2005 08:44 PM
First of all, thanks for a wonderful hack. I've been using this successfully for weeks at my photo related forums.
My question is this. Can I have the same gateway.php working for 2 different installs of Vbulletin? I also have a gaming site hosted on the same server and would like to import different groups for that forum. Either that or can you run two seperate instances of gateway.php on the same server?

Has anyone tried either of these methods?

Tia,
Chas.

AWS 04-05-2005 03:07 AM
Just an FYI. This doesn't work with php 5.0.4. I have to use 4.3.11 to run gateway.php and 5.0.4 for the sites.
I upgraded php and noticed that my usenet forums last post was 2 days behind the rest of the forums. I ran it at command prompt and got the error mime.php and nntp.php have to be in ./includes folder. I even set full paths to try and make it work and it didn't. I set up 4.3.11 to run gateway.php only and it started working.

mcncyo 04-05-2005 04:08 AM
Quote:
Originally Posted by jzewatsky
Thank you sooo much for writing and supporting this hack! This is exactly what my forum has needed!




Try the "Global Killfile" setting at the bottom of "NNTP Gateway Settings". If I read the instructions there, you could set the code to look for a word, set of words, string of characters in specific parts of the message. If that/those word(s) are present that message will not be turned into a thread. The text in the box should help you configure it to work the way you want. Hope that helps!

Anyone please correct me if I'm wrong.

Again thanks for the great hack!!!

thanks for the info. I didn't even seen that option.

mcncyo 04-05-2005 04:09 AM
I am having a big problem. I keep getting this error and can't find out why

Quote:
<br /><strong>Warning</strong>: makemeathumbnail(includes/functions_image.php): failed to open stream: No such file or directory in <strong>/includes/functions_nntp.php</strong> on line <strong>735</strong><br /><br />
<b>Fatal error</b>: makemeathumbnail(): Failed opening required 'includes/functions_image.php' (include_path='/usr/local/lib/php:/usr/lib/php') in <b>/home/website/public_html/forum/includes/functions_nntp.php</b> on line <b>735</b><br />

Ian Cunningham 04-06-2005 02:03 PM
Is there any way to make the posts load into more than 1 forum at a time, and to stage the import slowly - so as not to bring the server to its knees?

I'm trying to import a few newsgroups with lots 50,000 posts in each and it brings my server to a halt!


All times are GMT. The time now is 04:55 AM.
Page 20 of 26 « First 101819 20 2122 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.02359 seconds
  • Memory Usage 1,907KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (7)bbcode_code_printable
  • (1)bbcode_php_printable
  • (24)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (1)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete