vb.org Archive - need help on building output in template

vb.org Archive (https://vborg.vbsupport.ru/index.php)

- vB4 Programming Discussions (https://vborg.vbsupport.ru/forumdisplay.php?f=252)

- - need help on building output in template (https://vborg.vbsupport.ru/showthread.php?t=231539)

But why is it all meshd up? And on the first load the plugin is displayed below the About plugin.

Probably because your template is not using the correct css classes. If you look at your page source, the stuff that is 'showing' is class=selected_view_section, if it isn't showing (the tab isn't selected), it is class=view_section. You need to write a condition at the top of your template to define which class is used in your div (<vb:if condition="$selected_tab == 'mymodification'"> class="selected_view_section"<vb:else />class="view_section"</vb:if>)

that's correct, mymodification has the class Block, all the other have view_section and one has selected_view_section.

that isn't going to work, i had to try that before.

look below for what is outputed:

i have trying a lot but i can't get i to work.

PHP Code:


		
			
<div id="view-aboutme" class="selected_view_section">
<h3 class="subsectionhead">
</h3>
<h4 id="about-me" class="subsectionhead-understate">Basic Information</h4>
<div class="subsection">
</div>
<h4 class="subsectionhead-understate">Handtekening</h4>
<div class="subsection">\n Computers make very fas... very accurate mistakes.\n</div>
<h4 id="contact-info" class="subsectionhead-understate">Contact</h4>
<div class="subsection">
</div>
<h4 id="view-statistics" class="subsectionhead-understate">Statistieken</h4>
<div class="subsection">
</div>
</div>
<div id="view-friends-content" class="view_section">
<h3 id="friends" class="subsectionhead">
</h3>
<div>
</div>
</div>
<div id="view-infractions-content" class="view_section">\n \n </div>
<div id="view-mymodification" class="block">
<div class="view_section">\n\n$block_data[mymodification]\n\n</div>
</div>
<div class="underblock"/>

I don't understand what you are printing out there - that shouldn't be your template, so what is it?

that is the code what my members page give after rendering, and after inserting the code you gave in post 12.

at the bottom of the code you coulld see what it gave as output. and that is not what my plugin should give.

i put the code just before the hook location at the bottom of the members template.

[edit] code added

plugin code, hook location: members_hook_location_start

PHP Code:


		
			
$maxcolum = 4;
$maxrow = 4;
$maxwidth = 200;
$maxheight = 200;
$page = $vbulletin->input->clean_gpc('r', 'page', TYPE_INT);


$blocklist = array_merge($blocklist, array(
    'mymodification' => array(
        'class' => 'mymodification',
        'title' => 'Bijlagen',
        'hook_location' => 'profile_left_last'
        )
      ));

class vB_ProfileBlock_MyModification extends vB_ProfileBlock
{
    
    var $template_name = 'memberinfo_block_mymodification';

    function confirm_empty_wrap()
    {
        return true;
    }

    function confirm_display()
    {
        return ($this->block_data['mymodification'] != '');
    }

    function prepare_output($id = '', $options = array())
    {
        global $maxcolum, $maxrow, $maxwidth, $maxheight, $vbulletin, $page;

        $colum = 0;
        $forumids= null;
                
        $perpage = $maxcolum * $maxrow;
            
        foreach ($vbulletin->userinfo['forumpermissions'] AS $vbulletin->foruminfo[forumid] => $perm)
        {
            if (($perm & $vbulletin->bf_ugp_forumpermissions['canview']))
            {
                $forumids .= ','.$vbulletin->foruminfo[forumid];
            }
        }    
      
        $attachments = $vbulletin->db->query_read("
            SELECT attachment.attachmentid, attachment.contentid, attachment.userid, post.postid, post.threadid, post.visible,thread.forumid,
            thread.title, thread.open
            FROM vb3_attachment as attachment 
            LEFT JOIN vb3_post AS post ON (post.postid = attachment.contentid)
            LEFT JOIN vb3_thread as thread on(post.threadid = thread.threadid)
            LEFT JOIN vb3_deletionlog AS deletionlog ON(attachment.contentid = deletionlog.primaryid AND type = 'post')
            WHERE attachment.userid = ".$this->profile->userinfo['userid']. "
            AND (
            thread.forumid IN(0$forumids)
            AND thread.visible = 1 
            AND post.visible = 1 
            AND deletionlog.primaryid IS NULL)");
        $totalattachments = $vbulletin->db->num_rows($attachments);            
      

        $totalpages = ceil($totalattachments / ($perpage));
        $perpage = $maxcolum * $maxrow;
        
        $vbulletin->input->clean_array_gpc('r', array(
            'perpage'    => TYPE_UINT,
            'pagenumber' => TYPE_UINT,
            ));  
      
        

        $attachments = $vbulletin->db->query_read("
            SELECT attachment.attachmentid, attachment.contentid, attachment.userid, post.postid, post.threadid, post.visible,thread.forumid,
            thread.title, thread.open
            FROM vb3_attachment as attachment 
            LEFT JOIN vb3_post AS post ON (post.postid = attachment.contentid)
            LEFT JOIN vb3_thread as thread on(post.threadid = thread.threadid)
            LEFT JOIN vb3_deletionlog AS deletionlog ON(attachment.contentid = deletionlog.primaryid AND type = 'post')
            WHERE attachment.userid = ".$this->profile->userinfo['userid']. "
            AND (
            thread.forumid IN(0$forumids)
            AND thread.visible = 1 
            AND post.visible = 1 
            AND deletionlog.primaryid IS NULL) limit ".($page*$perpage). ",". (($page+1)*$perpage));      
      
        
      
      
        $output = "";
        $output .= "<br>Totaal aantal bijlagen ".$totalattachments. "<br>Huidige pagina : ". $curentpage. " van ". $totalpages. "
                    URL page : ".$page."<br>
                    <table border=1>";
        
         
        while ($post = mysql_fetch_array($attachments))
        {
            if ($colum == 0) {$output .= "<TR>";}
        
            $output .= "<td width=".$maxwidth." height=".$maxheight."><a target=blank href=attachment.php?attachmentid=".$post['attachmentid']."/>
                        <img border=0 src=attachment.php?attachmentid=".$post['attachmentid']."&thumb=1 width=100% height=100%/>
                        </a></td>" ;
        
            $colum = $colum + 1;

            if ($colum == $maxcolum){ 
                $colum = 0; 
                echo "</tr>";
                }
        }
        $output .= "</table>";
        $this->block_data['mymodification'] = $output;
    }
}

Template : memberinfo_block_mymodification

PHP Code:


		
			
<vb:if condition="$selected_tab == 'mymodification'"> class="selected_view_section"<vb:else />class="view_section"</vb:if>
$block_data[mymodification]

Template : last peace of MEMBERINFO

PHP Code:


		
			
        <div id="view-aboutme" class="<vb:if condition="$selected_tab == 'aboutme'">selected_view_section<vb:elseif condition="$selected_tab == '' AND !$show['post_visitor_message']" />selected_view_section<vb:else />view_section</vb:if>">
                {vb:raw blocks.aboutme}
            </div>
            <div id="view-friends-content" class="<vb:if condition="$selected_tab == 'friends'">selected_view_section<vb:else />view_section</vb:if>">
                {vb:raw blocks.friends}
            </div>
            <div id="view-infractions-content" class="<vb:if condition="$selected_tab == 'infractions'">selected_view_section<vb:else />view_section</vb:if>">
                {vb:raw blocks.infractions}
            </div>
            
{vb:raw template_hook.profile_left}
        </div>
    </div>
</div>

{vb:raw footer}
</body>
</html>

The code I posted was not complete code. It was code you will need to use in your custom template that you need to create for your tab. The article tells you to create a template. You CANNOT use the code she posted since it is vb3 template code. What does your template look like (you should look at other tabs and see what code is needed) and what is it called (it should be called memberinfo_block_mymodification)

my template says

PHP Code:


		
			
<div id="view-mymodification" class="<vb:if condition="$selected_tab == 'mymodification'">selected_view_section<vb:else />view_section</vb:if>">
{$block_data[mymodification]}
</div>

this is almost working, only i get now on my life test site 2 lines with div id= "....." when i change the tab only the first div is changed into class="view_section_selected"

PHP Code:


		
			
<div id="view-mymodification" class="block">
<div id="view-mymodification" class="view_section">\nContent to show in the tab.\n</div>
</div>

the plugin is default from the article

when i look at, memberinfo_block_aboutme, there is only html code and some vb stuff not rellated to this problem.

i realy don't know.

maybe it would help if i could find the hook location is a template, but when i search the templates it comes up with no hits.

maybe it's me, that i'm a beginner. so when it's to much trouble leave it and close this treaht. i'm stuck on this for 4 days now, i becom a bit crazy

--------------- Added [DATE]1262378496[/DATE] at [TIME]1262378496[/TIME] ---------------

lynne,maybe you have a peace of working plugin and template, so i could see how you did it?

You aren't putting 'names' above any of your template code so I can't tell what templates you are posting (nor can I tell why you have two - you should only have one, I would think).

I didnt' really want to post my template because it is on my RC4 site - I haven't upgraded that particular test site to Gold yet. However, here is mine which will hopefully work on gold.

template name - memberinfo_block_mytorrentstats

PHP Code:


		
			
<div id="view-{vb:raw id}" <vb:if condition="$selected_tab == 'mytorrentstats'"> class="selected_view_section"<vb:else />class="view_section"</vb:if>>
<h3 class="subsectionhead">Torrent Stats</h3>
        {vb:raw block_data.mytorrentstats}
</div>
<div class="underblock"></div>
<!-- / {vb:raw id} -->

and your plugin looks like what i have except for what it's given back. but building the block and giving back it's content.

the template name where i speake about is memberinfo_block_mymodification

block_data.mytorrentstats is what you get back from your plugin ?

Ours are similar. One mistake you are making in yours is that you are not allowed to use the same id twice on a page. You are. I don't know if that is causing the problem, but it always helps to get rid of any html/css errors to eliminate those as the culprit.

X vBulletin 3.8.12 by vBS Debug Information
Template Usage: (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (7)bbcode_php_printable (1)footer (1)gobutton (1)header (1)headinclude (6)option (1)pagenav (1)pagenav_curpage (2)pagenav_pagelink (1)post_thanks_navbar_search (1)printthread (10)printthreadbit (1)spacer_close (1)spacer_open Phrase Groups Available: global postbit showthread	Included Files: ./printthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/class_bbcode_alt.php ./includes/class_bbcode.php ./includes/functions_bigthree.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete printthread_start pagenav_page pagenav_complete bbcode_fetch_tags bbcode_create bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete printthread_post printthread_complete
Messages:

Phrase Groups Available:

X vBulletin 3.8.12 by vBS Debug Information
Page Generation 0.01957 seconds Memory Usage 1,841KB Queries Executed 10 (?)
More Information
Template Usage: (1)ad_footer_end (1)ad_footer_start (1)ad_header_end (1)ad_header_logo (1)ad_navbar_below (7)bbcode_php_printable (1)footer (1)gobutton (1)header (1)headinclude (6)option (1)pagenav (1)pagenav_curpage (2)pagenav_pagelink (1)post_thanks_navbar_search (1)printthread (10)printthreadbit (1)spacer_close (1)spacer_open Phrase Groups Available: global postbit showthread	Included Files: ./printthread.php ./global.php ./includes/init.php ./includes/class_core.php ./includes/config.php ./includes/functions.php ./includes/class_hook.php ./includes/modsystem_functions.php ./includes/class_bbcode_alt.php ./includes/class_bbcode.php ./includes/functions_bigthree.php Hooks Called: init_startup init_startup_session_setup_start init_startup_session_setup_complete cache_permissions fetch_threadinfo_query fetch_threadinfo fetch_foruminfo style_fetch cache_templates global_start parse_templates global_setup_complete printthread_start pagenav_page pagenav_complete bbcode_fetch_tags bbcode_create bbcode_parse_start bbcode_parse_complete_precache bbcode_parse_complete printthread_post printthread_complete
Messages: