vb.org Archive
Page 17 of 24 « First 71516 17 1819 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 3.8 Add-ons (https://vborg.vbsupport.ru/forumdisplay.php?f=235)
-   -   Forum Display Enhancements - Article Forums (https://vborg.vbsupport.ru/showthread.php?t=211638)

nohuhu 07-07-2009 04:21 PM
1 Attachment(s)
bananalive,

russian translation for your mod, updated to 1.8.

smirkley 07-07-2009 11:08 PM
Quote:
Originally Posted by rabidkevin (Post 1844584)
on any article page aka showthread

the main article page doesn't have this javascript error.

it also appears to only happen to users who are logged in. no error when logged out.

I get it too...

My js error statement is:
Quote:
Line: 12
Char: 1384
Error: 'this.controlobj' is null or not an object
Code: 0
URL: (the literal url of the article being viewed on my site)
I havent been able to isolate it to any other mod conflict,...yet

framer 07-08-2009 11:27 AM
Quote:
Originally Posted by rabidkevin (Post 1844584)
on any article page aka showthread

the main article page doesn't have this javascript error.

it also appears to only happen to users who are logged in. no error when logged out.
That's the same problem here, It's the one thing keeping from taking this live on my board. I've been playing with it for a week. I had not noticed the above until I just tried it and it's the same as above. Could be a clue. Will look again later today.

framer

I have not read this whole thread yet but is there a prefered skin to use?

framer

vitrag24 07-08-2009 06:21 PM
want this for vb 3.7.1

Saviour 07-09-2009 09:22 AM
1 Attachment(s)
Pagination shows up within table...

Is there a way to have this show up outside the table and to the right, as it does in regular forums?

See attached image. The page numbers are within the gray table and need to be moved outside this area and to the right, as in regular forums.

framer 07-09-2009 01:45 PM
Quote:
Originally Posted by framer (Post 1845068)
That's the same problem here, It's the one thing keeping from taking this live on my board. I've been playing with it for a week. I had not noticed the above until I just tried it and it's the same as above. Could be a clue. Will look again later today.

framer

I have not read this whole thread yet but is there a prefered skin to use?

framer
I should have left more info, sorry. viewing withie8 browser Vista & ie7 brower XP. Both show an error only when someone's logged in but no error when not logged in?

framer

a9eel 07-09-2009 09:49 PM
thx

framer 07-09-2009 10:54 PM
Just tried Firefox 3.5 and it shows NO errors.

framer

Saviour 07-11-2009 12:29 AM
Anyone? https://vborg.vbsupport.ru/showpost....&postcount=647

smirkley 07-11-2009 05:48 PM
Quote:
Originally Posted by smirkley (Post 1844843)
I get it too...

I havent been able to isolate it to any other mod conflict,...yet
I did a once over analysis again and I cannot get the script error to extinguish.
I dont think it is a mod conflict, but I look at the demo for this mod and dont see the error.

So I dunno what is going on unless it is just a difference of settings or something. :confused:

bananalive 07-12-2009 11:04 AM
Quote:
Originally Posted by smirkley (Post 1847079)
I did a once over analysis again and I cannot get the script error to extinguish.
I dont think it is a mod conflict, but I look at the demo for this mod and dont see the error.

So I dunno what is going on unless it is just a difference of settings or something. :confused:
I'm not sure what is causing the error, I think it might be due to the different postbit meaning there might not be an object with correct id for javascript. But this is just a guess and i have yet to find source of error.

bananalive 07-12-2009 11:12 AM
Quote:
Originally Posted by Saviour (Post 1845658)
Pagination shows up within table...

Is there a way to have this show up outside the table and to the right, as it does in regular forums?

See attached image. The page numbers are within the gray table and need to be moved outside this area and to the right, as in regular forums.
Find and delete in template af_center:
HTML Code:
$pagenav
Add $pagenav in template af_articles after:
HTML Code:
</td>
        </tr>
</table>
Or you could try the alternative display.

bananalive 07-12-2009 11:14 AM
Quote:
Originally Posted by valendono (Post 1842747)
@banana
its not work with vs-hide thanks button. :( can u help me ? thanks
What is not working?

maidos 07-12-2009 11:43 AM
on forumdisplay.php when i try to click the forum section that i assigned to be article as it said
page not found

Saviour 07-12-2009 12:44 PM
1 Attachment(s)
Quote:
Originally Posted by bananalive (Post 1847392)
Find and delete in template af_center:
HTML Code:
$pagenav
Add $pagenav in template af_articles after:
HTML Code:
</td>
        </tr>
</table>
Or you could try the alternative display.

I just tried to use the alternate display setting...and now my articles.php page is screwed...

Tried setting it back and it's still screwed. See the following page: http://glitchpc.com/forums/articles.php or the attached image. I have two navbars now...

Anyway to get this fixed, now?

Also...the right column is not showing up on the articles.php page. Only module unchecked in Admin CP is Most Commented Articles. If I check it, then the right column shows up.

[S]The new thread buttons are missing, as well...along with a lot of my buttons at the end of any of the posted articles.[/S]

I have reverted templates, uninstalled/re-installed...I still have the same issues. Can I get a little advice, please?


Thanks, in advance...

Saviour 07-12-2009 11:12 PM
Last, but certainly not least...

Is there any way to disable all the "quote" buttons from the first post (only) within the article forum? I'd like comments/replies to have the ability to quote...but not the first post of the thread/article.

smirkley 07-13-2009 05:31 AM
Quote:
Originally Posted by bananalive (Post 1847391)
I'm not sure what is causing the error, I think it might be due to the different postbit meaning there might not be an object with correct id for javascript. But this is just a guess and i have yet to find source of error.

I just finished extensive testing on my setup, and with all mods disabled except this one, and on a vB default style, and checking most of the combinations of settings for the articles mod,...

It still shows up on every showthread page in the articles.

Tomorrow I can try a comple uninstall/reinstall, but at this point, I cant find any sense of it.

smirkley 07-13-2009 08:24 AM
Just tested on a very basic vb install.

specs:

vB3.8.2
vB Blog
vB Project Tools
vB Advanced
Articles
Stock OEM vB style
Viewed with IE6 and 8 while logged in (my live board uses legacy postbit, and my test board used regular postbit)

Made one post in a category, using the fieldset version of article display, and error is produced on first try.

I know it isnt caused by PT, Blog, or VBA, as I can disable them and run it on a basic stock vB3.8.2

Trying to help narrow it down, but I cant set it on any more a basic install than that.

valdet 07-13-2009 10:20 AM
I've looking through af_catbit template to make the top forums always bold, but I couldn't make it with any type of conditional.

See pic for further explanation.

https://vborg.vbsupport.ru/


Maybe a better display would be if you can make it to be displayed as a tree navigation menu similar to this hack. https://vborg.vbsupport.ru/showthread.php?t=127536

hugh_ 07-13-2009 11:47 AM
When I drill down into 2 or the 3 sub-categories I've created I see article titles the other sub-categories listed... What's wrong?

hugh_ 07-13-2009 09:54 PM
Never mind I moved the post to the wrong directory...

vgevolution 07-13-2009 09:57 PM
I'm a bit disturbed that I can't have different styles applied to categories (forums). I can set the style in the forum's settings, and even set it to override the user's settings, but the article listing display's are still my main theme for articles.php. Is it even possible for articles.php to use the style of the category that I click on when viewing the article listing?

Saviour 07-14-2009 02:33 PM
Bump! https://vborg.vbsupport.ru/showpost....&postcount=657

Also...Bump! https://vborg.vbsupport.ru/showpost....&postcount=658

smirkley 07-16-2009 01:46 AM
Can I ask,.... has the original 1.8 pack been updated since I downloaded it possibly, causing my install attempts to give the error and the demo to not give the error?

I am running out of reasons why this happens, and looking to find resolution as this is a good mod.

Saviour 07-16-2009 12:30 PM
No offense, bananalive...

Where's the support for this mod? It's been three days since my support request...and I haven't received an answer...or a suggestion, for that matter. I even donated to remove branding, but am not getting any help, whatsoever.

bananalive 07-16-2009 07:54 PM
1 Attachment(s)
Quote:
Originally Posted by Saviour (Post 1847438)
I just tried to use the alternate display setting...and now my articles.php page is screwed...

Tried setting it back and it's still screwed. See the following page: http://glitchpc.com/forums/articles.php or the attached image. I have two navbars now...

Anyway to get this fixed, now?

Also...the right column is not showing up on the articles.php page. Only module unchecked in Admin CP is Most Commented Articles. If I check it, then the right column shows up.

[S]The new thread buttons are missing, as well...along with a lot of my buttons at the end of any of the posted articles.[/S]

I have reverted templates, uninstalled/re-installed...I still have the same issues. Can I get a little advice, please?


Thanks, in advance...
Try attached file

bananalive 07-16-2009 07:56 PM
Quote:
Originally Posted by Saviour (Post 1847743)
Last, but certainly not least...

Is there any way to disable all the "quote" buttons from the first post (only) within the article forum? I'd like comments/replies to have the ability to quote...but not the first post of the thread/article.
Edit template: af_firstpost

Remove:
HTML Code:
                        <if condition="$post['replylink']">
                                <a href="$post[replylink]" rel="nofollow"><img src="$stylevar[imgdir_button]/<if condition="$post['forwardlink']">reply_small<else />quote</if>.gif" alt="$vbphrase[reply_with_quote]" border="0" /></a>
                        </if>
                        <if condition="$show['multiquote_post']">
                                <a href="$post[replylink]" rel="nofollow" onclick="return false"><img src="$stylevar[imgdir_button]/multiquote_<if condition="$show['multiquote_selected']">on<else />off</if>.gif" alt="$vbphrase[multi_quote_this_message]" border="0" id="mq_$post[postid]" /></a>
                        </if>

bananalive 07-16-2009 08:01 PM
Quote:
Originally Posted by valdet (Post 1848003)
I've looking through af_catbit template to make the top forums always bold, but I couldn't make it with any type of conditional.

See pic for further explanation.

http://img17.imageshack.us/img17/7662/catscyz.jpg


Maybe a better display would be if you can make it to be displayed as a tree navigation menu similar to this hack. https://vborg.vbsupport.ru/showthread.php?t=127536
Use
HTML Code:
<if condition="$depth == 0"><b></if>

bananalive 07-16-2009 08:12 PM
Quote:
Originally Posted by vgevolution (Post 1848317)
I'm a bit disturbed that I can't have different styles applied to categories (forums). I can set the style in the forum's settings, and even set it to override the user's settings, but the article listing display's are still my main theme for articles.php. Is it even possible for articles.php to use the style of the category that I click on when viewing the article listing?
It does not affect the user's style.

I will look into articles.php adopting forced user style.

bananalive 07-16-2009 08:27 PM
Quote:
Originally Posted by smirkley (Post 1849650)
Can I ask,.... has the original 1.8 pack been updated since I downloaded it possibly, causing my install attempts to give the error and the demo to not give the error?

I am running out of reasons why this happens, and looking to find resolution as this is a good mod.
I do not think so.

Saviour 07-16-2009 08:31 PM
Quote:
Originally Posted by bananalive (Post 1850106)
Try attached file
Sorry...I uploaded the new file and still have two navbars, as well as two Google Ads.

Saviour 07-16-2009 08:44 PM
Quote:
Originally Posted by bananalive (Post 1850110)
Edit template: af_firstpost

Remove:
HTML Code:
                        <if condition="$post['replylink']">
                                <a href="$post[replylink]" rel="nofollow"><img src="$stylevar[imgdir_button]/<if condition="$post['forwardlink']">reply_small<else />quote</if>.gif" alt="$vbphrase[reply_with_quote]" border="0" /></a>
                        </if>
                        <if condition="$show['multiquote_post']">
                                <a href="$post[replylink]" rel="nofollow" onclick="return false"><img src="$stylevar[imgdir_button]/multiquote_<if condition="$show['multiquote_selected']">on<else />off</if>.gif" alt="$vbphrase[multi_quote_this_message]" border="0" id="mq_$post[postid]" /></a>
                        </if>
Thank you...worked like a charm.

bananalive 07-17-2009 09:08 AM
1 Attachment(s)
Quote:
Originally Posted by Saviour (Post 1850135)
Sorry...I uploaded the new file and still have two navbars, as well as two Google Ads.
Check template: shell_blank for two instances of $navbar

Try uploading attached file

Saviour 07-17-2009 10:49 AM
Quote:
Originally Posted by bananalive (Post 1850430)
Check template: shell_blank for two instances of $navbar

Try uploading attached file
There are not two instances of $navbar in the shell_blank template. I also tried the attached file, overwriting the one currently on the server.

Still...same issue.

bananalive 07-17-2009 03:49 PM
1 Attachment(s)
Quote:
Originally Posted by Saviour (Post 1850469)
There are not two instances of $navbar in the shell_blank template. I also tried the attached file, overwriting the one currently on the server.

Still...same issue.
Try importing/uploading attached files

Was there anything else you changed apart from switching to alternative display?

Saviour 07-17-2009 04:12 PM
Quote:
Originally Posted by bananalive (Post 1850618)
Try importing/uploading attached files

Was there anything else you changed apart from switching to alternative display?
I will try the new files.

Everything was working fine until you directed me to try the alternate display. As soon as I made that selection and saved the settings...I had two navbars and two Google Ads. It has been that way, ever since. Nothing I have tried has worked.

Will keep you posted...

Saviour 07-17-2009 04:18 PM
Update...

The latest two files seemed to have fixed the problem. Thanks for taking the time to fix this for me.

cbiweb 07-17-2009 05:25 PM
What would cause the article and the comments to change places? When I post an article, it looks perfect, as expected. As soon as someone comments, the comment is now in the article's place, and the article is down with other comments. ?????

bananalive 07-17-2009 06:52 PM
Quote:
Originally Posted by cbiweb (Post 1850683)
What would cause the article and the comments to change places? When I post an article, it looks perfect, as expected. As soon as someone comments, the comment is now in the article's place, and the article is down with other comments. ?????
I'm not sure... check the times of the posts. Also have you enabled newest posts first for threads?

bposner 07-17-2009 07:19 PM
Nice addition. I installed this and was wondering if there is a layout format or setting to give the article a more magazine look, maybe columns, text wrap around images. etc.

Thanks!


All times are GMT. The time now is 01:31 PM.
Page 17 of 24 « First 71516 17 1819 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.01963 seconds
  • Memory Usage 1,859KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (7)bbcode_html_printable
  • (22)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (1)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete