vb.org Archive
Page 13 of 16 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

vb.org Archive (https://vborg.vbsupport.ru/index.php)
-   vBulletin 2.x Full Releases (https://vborg.vbsupport.ru/forumdisplay.php?f=4)
-   -   Warnings System Hack v2.1 (https://vborg.vbsupport.ru/showthread.php?t=43265)

Gary King 05-29-2003 07:16 PM
Quote:
Today at 03:59 PM Gaz.t said this in Post #480
how do i find out the usergroup id

I can use the point system but its not banning !!

Thanx
To find the usergroup id, just follow the instructions in the install file.

(Simply check the link properties for the usergroup edit link, and then copy down the last number after the final = (i.e. usergroupid=10))

skrueger80 05-29-2003 07:57 PM
i installed this withouth any problems whatsoever. i can sumbit a ban without problems. the problem i am getting is the warning does not register anywhere, not in the postbit, not in the usercp or the admin CP i only get the email telling me someone has warned someone else. I cannot figure out why it doesn't actually warn. i set the templates and made sure my admin cp options were submitted and correct user groups and stuff. i read every single post on this thread (from page 1 to page 32) i am clueless as to why it doesn't work?

SaintDog 06-03-2003 08:19 PM
The config file is missing from the ZIP file....?

SaintDog 06-03-2003 08:42 PM
Ok, well I got it working, after playing with it a bit, not had to warn anyone yet, but it seems to serve its purpose. Good job so far!

Spinball 06-05-2003 07:33 AM
This hack looks perfect for our forums where we warn troublesome users and eventually ban them.

I'm running 2.3.0 with these hacks:
Quick Reply Box
Buy/Sell/Trade User Rating System
Virgin topics "hackette"
and PM All thread users which doesn't work properly for moderators. Only Super mods and Admin.

Can people recommend that this is worth installing now that there is no support from gforce and one or two people have experienced problems? I have good mySQL and reasonable PHP skills but the forums code is gobbledygook to me.

On a general note I think this mod should be adopted by an experienced hacker as it is (or at least looks) so good.

DaFire 06-05-2003 04:39 PM
sorry i don't read all the posts.. i had a problem with an other hack and i think i found the problem here in the warning hack.

in member.php:

PHP Code:
// +++++++ Warning Hack 2.0 [ g-force2k2 ] +++++++
  $templatesused = ",warn_getinfo_warning,warn_userinfo";
// +++++++ Warning Hack 2.0 [ g-force2k2 ] +++++++ 
should be

PHP Code:
// +++++++ Warning Hack 2.0 [ g-force2k2 ] +++++++
  $templatesused .= ",warn_getinfo_warning,warn_userinfo";
// +++++++ Warning Hack 2.0 [ g-force2k2 ] +++++++ 
notice the .=

Bastian

legendarysk8er 06-05-2003 07:50 PM
It says upload warnconfig.php to admin cp, and there is no warnconfig.php in 2.1 folder..

Gary King 06-05-2003 08:08 PM
Just ignore the warnconfig.php, it's not supposed to be there.

Jon Levin 06-08-2003 06:29 AM
I'm having a problem, I got everything set up...so it seems, but I put the code in the postbit template, but nothings shows up. I'm a mod at another forum using this hack, so I know what it should show, but it's just not showing anything. Any ideas?

Gary King 06-08-2003 12:09 PM
Go to vBulletin Options in the admin cp, and hit submit at the bottom.

Jon Levin 06-08-2003 04:43 PM
ok, I just re-set up everything, and it seems to be working except one small problem...

There is a 2nd admin at the board, and obviously he should view the stuff. I have permissions set so that the usergroup admins can view everything, yet for some reason, he can't. He loged in as me and it worked fine. Help?

sajjid 06-09-2003 06:18 PM
Can some one please help i tried to install this hack few times but get this error

every thing is ok this error shows up everytime i try to log at the View Warning Logs


PHP Code:
Database error in vBulletin Control Panel 2.3.0:

Invalid SQL: 
      SELECT logid, username, userid, target, targetid, timestamp, type, postid, comment
      FROM warnings_log
         ORDER BY logid
      LIMIT 0,
mysql error: You have an error in your SQL syntax.  Check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 4

mysql error number: 1064

Date: Monday 09th of June 2003 07:20:35 PM
Script: [url]http://www.spinzone.org/forum/forum/admin/admin_warning.php?action=view_logs&[/url]
Referer: 
my url should be http://www.spinzone.org/forum

but for sone reason above error have two forum dirs

sajjid 06-10-2003 09:11 PM
its ok i got it sorted

Joel Llewellyn 06-15-2003 03:06 PM
erm, i installed everything but when i look in get info, and postbit, i see nothing about warning level = 0% or whatever like u showed in the ss', what is wrong? i didnt have a warnconfig.php file could that be what is wrong? i didnt even have a warnconfig.php file in the zip file.. do u think thats whats wrong?

drives fast 06-15-2003 06:25 PM
Joel Llewellyn,
those questions have been covered over and over again throught this thread

Bumpaneer 06-20-2003 02:14 PM
Was the problem with multiple warnings for the same post ever solved? If so can someone give me the link, or repost the code? Do I have to uninstall and reinstall with modifications? Any help would be appreciated.

~Bumpaneer

Splitfyre 06-22-2003 10:27 PM
Is there any way I can get the Warning Hack info to appear in the user's postbit for each reply? This might help with consistant table layout.

Splitfyre 06-22-2003 10:27 PM
Is there any way I can get the Warning Hack info to appear in the user's postbit for each reply? This might help with consistant table layout.

Gary King 06-22-2003 11:11 PM
Splitfyre: It's already like that.

Splitfyre 06-23-2003 12:21 AM
Trying to get that info in here....

Gary King 06-23-2003 12:22 AM
Quote:
Today at 09:21 PM Splitfyre said this in Post #500
Trying to get that info in here....
It's not very difficult. Just search for Posts: in the postbit, and place the warn info somewhere under there.

sajjid 06-23-2003 03:18 PM
Hi can someone please help me with this please i had this hack installed and its very nice only problem now is i am getting my board ready for vb3 and uninstalling all the hacks i installed on vb2.3.0 so the transfer will be easier i managed to uninstall most but this i run the uninstall script all the tables have gone and templates except this link on the forumdisplay on top just underneath the welcome , new post , and clock links the is [ View Warnings List ] how can i remove that please i also attached screenshot of what i mean
or here
http://www.spinzone.org/screenshot.jpg

Gary King 06-23-2003 03:49 PM
It's in your forumhome template.

sajjid 06-23-2003 03:56 PM
many thanks got it fixed some how i over lokk that thanks again

Gary King 06-23-2003 03:59 PM
Yep no problem :)

AZone 06-24-2003 08:13 PM
Can you post updated installation guide?

1. "Was the problem with multiple warnings for the same post ever solved?" - why nobody did answer this question?
2. Can this hack automatically unban users after some days?

Asso 06-28-2003 02:58 PM
where is the zip?

Paris Holley 07-04-2003 06:03 AM
how do i put a break between Warning Level: 0 [ View User Warnings ] [ Warn This User ]

so that it looks like
Warning Level: 0
[ View User Warnings ]
[ Warn This User ]

Paris Holley 07-10-2003 03:46 AM
also does this just ban the username or the ip address?

jdmuniverse 07-10-2003 05:08 AM
How did you fix this? I hget the same error when I run the installer :(

TIA


Quote:
06-09-03 at 08:18 PM sajjid said this in Post #492
Can some one please help i tried to install this hack few times but get this error

every thing is ok this error shows up everytime i try to log at the View Warning Logs


PHP Code:
Database error in vBulletin Control Panel 2.3.0:

Invalid SQL: 
      SELECT logid, username, userid, target, targetid, timestamp, type, postid, comment
      FROM warnings_log
         ORDER BY logid
      LIMIT 0,
mysql error: You have an error in your SQL syntax.  Check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 4

mysql error number: 1064

Date: Monday 09th of June 2003 07:20:35 PM
Script: [url]http://www.spinzone.org/forum/forum/admin/admin_warning.php?action=view_logs&[/url]
Referer: 
my url should be http://www.spinzone.org/forum

but for sone reason above error have two forum dirs

Gary King 07-10-2003 10:27 PM
Quote:
06-24-03 at 05:13 PM AZone said this in Post #506
Can you post updated installation guide?

1. "Was the problem with multiple warnings for the same post ever solved?" - why nobody did answer this question?
2. Can this hack automatically unban users after some days?
1. I don't think that was ever solved.
2. No, it cannot.

Gary King 07-10-2003 10:28 PM
Quote:
06-28-03 at 11:58 AM Asso said this in Post #507
where is the zip?
Here

Gary King 07-10-2003 10:29 PM
Quote:
07-04-03 at 03:03 AM Paris Holley said this in Post #508
how do i put a break between Warning Level: 0 [ View User Warnings ] [ Warn This User ]

so that it looks like
Warning Level: 0
[ View User Warnings ]
[ Warn This User ]
Add <br> where you want the break to appear in the postbit template.

Vivi Ornitier 07-17-2003 09:02 PM
I was wondeirn if there is a way for the warnings to gradually go down in time because if u have hella members and lots of warnings, u can't keep it on them forever and it's a +++++ to revoke everything so i mean like is there way for points to come off after a bit of time???

Gary King 07-17-2003 09:30 PM
Hasn't been done yet, I don't think.

Gez 07-22-2003 06:42 AM
Where is this warnconfig.php file? Cause I unzipped the warnings hack and have all the files mentioned in installation_txt.php except warnconfig.php .
Any ideas?

Gary King 07-22-2003 01:10 PM
There is no warnconfig.php

kaotic 07-22-2003 03:27 PM
It mentions warnconfig.php a lot in the installation txt. Could someone please attach it?

Edit: If warnconfig.php doesn't exist, can someone tell me where the $BANtot variable is located?

Gary King 07-22-2003 04:01 PM
Have you tried searching for $BANtot in the files?

kaotic 07-22-2003 10:58 PM
Yes, $BANtot is used several times, but I'm not sure where I'm suppose to define what number it should be. I suppose I could just replace all instances of $BANtot with a number, though.


All times are GMT. The time now is 11:56 AM.
Page 13 of 16 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.

X vBulletin 3.8.12 by vBS Debug Information
  • Page Generation 0.02210 seconds
  • Memory Usage 1,833KB
  • Queries Executed 10 (?)
More Information
Template Usage:
  • (1)ad_footer_end
  • (1)ad_footer_start
  • (1)ad_header_end
  • (1)ad_header_logo
  • (1)ad_navbar_below
  • (4)bbcode_php_printable
  • (6)bbcode_quote_printable
  • (1)footer
  • (1)gobutton
  • (1)header
  • (1)headinclude
  • (6)option
  • (1)pagenav
  • (1)pagenav_curpage
  • (4)pagenav_pagelink
  • (1)pagenav_pagelinkrel
  • (1)post_thanks_navbar_search
  • (1)printthread
  • (40)printthreadbit
  • (1)spacer_close
  • (1)spacer_open 
Phrase Groups Available:
  • global
  • postbit
  • showthread
Included Files:
  • ./printthread.php
  • ./global.php
  • ./includes/init.php
  • ./includes/class_core.php
  • ./includes/config.php
  • ./includes/functions.php
  • ./includes/class_hook.php
  • ./includes/modsystem_functions.php
  • ./includes/class_bbcode_alt.php
  • ./includes/class_bbcode.php
  • ./includes/functions_bigthree.php 
Hooks Called:
  • init_startup
  • init_startup_session_setup_start
  • init_startup_session_setup_complete
  • cache_permissions
  • fetch_threadinfo_query
  • fetch_threadinfo
  • fetch_foruminfo
  • style_fetch
  • cache_templates
  • global_start
  • parse_templates
  • global_setup_complete
  • printthread_start
  • pagenav_page
  • pagenav_complete
  • bbcode_fetch_tags
  • bbcode_create
  • bbcode_parse_start
  • bbcode_parse_complete_precache
  • bbcode_parse_complete
  • printthread_post
  • printthread_complete