PDA

View Full Version : Show Thread Enhancements - Thread Status System LITE


nhawk
02-18-2013, 11:00 PM
THIS ADD-ON IS NO LONGER AVAILABLE AND IS NOT SUPPORTED

Allows users to set the status for a thread via the Thread Tools menu in forums selected by admin configuration.

Features..
Allow thread starter to change thread status.
Allow usergroups to change thread status.
6 Admin configurable thread statuses.
Select whether or not to auto close thread for each thread status.
Configure the color of each thread status as shown in forum and thread display.
Select which forums should use the thread status system.
Select whether or not thread status will be displayed on Forumhome page.
Select which usergroups can view the thread status.

This add-on has been tested on vB 4.1.10 and 4.2.0 PL 3.

The PRO version of this mod is available from my site..
Thread Status System PRO (http://snogssite.com/showthread.php?1004-Thread-Status-Pro-Features)


* INSTALLATION *
-----------------------
1) Import the product XML file (product-thrdstatus.xml) into the Product Manager in AdminCP.

2) Go to ACP->Settings->Options->Thread Status Settings

3) Set the options as you would like them to be.


* History (Changelog) *
------------------------------
1.0.0 (February 19, 2013)
- Initial Release


Available Language Packs:
German (http://www.vbulletin-germany.org/showthread.php?10194-Thread-Status-System-goes-quot-Themenstatusverwaltung-quot)

ForceHSS
02-19-2013, 10:00 PM
Will try it out

tareqbd
02-20-2013, 02:47 AM
Thank you nhawk dude.
I will like to request more extension in this mod. Such as, move thread to certain forum on completion.
I hope you can make it done.

Sven Voet
02-20-2013, 01:46 PM
Is it possible to Use this Mod with the original Threadprefixes? So that there is only one Status, instead of two...

nhawk
02-20-2013, 03:00 PM
Is it possible to Use this Mod with the original Threadprefixes? So that there is only one Status, instead of two...

Thread prefixes aren't status messages. So, no it's not possible to do what you want to do.

Nirjonadda
02-20-2013, 05:53 PM
Bug on Closed Thread Mark when Closed thread Status Marked,Reopen Closed Thread,Please can you add option Closed Thread Mark up does not reopen thread?

nhawk
02-20-2013, 06:03 PM
Bug on Closed Thread Mark when Closed thread Status Marked,Reopen Closed Thread,Please can you add option Closed Thread Mark up does not reopen thread?

I don't understand what you're saying.

If you clear the status, the thread re-opens.

If you change the status to a different status that doesn't close the thread, it re-opens.

Nirjonadda
02-20-2013, 06:05 PM
when Closed Thread change the status it re-opens,why Closed Thread change the status it re-opens?

nhawk
02-20-2013, 06:21 PM
when Closed Thread change the status it re-opens,why Closed Thread change the status it re-opens?

Because you have the status you're changing it to set to not close the thread when it is selected.

Nirjonadda
02-21-2013, 09:59 AM
How to thread Status Marked Unlink or UnClickable?Is there any option for thread Status Marked Unlink or UnClickable?

nhawk
02-21-2013, 10:56 AM
How to thread Status Marked Unlink or UnClickable?Is there any option for thread Status Marked Unlink or UnClickable?

I don't understand what you're asking.

There is an option to clear the status.

If you don't want an option to appear, delete it from settings.

Nirjonadda
02-21-2013, 11:27 AM
Thread Status Marked Without Clickable.

Ex:

143867

nhawk
02-21-2013, 11:29 AM
Thread Status Marked Without Clickable.

Ex:

143867

The thread status becomes part of the thread title so you can't make it unclickable.

Alan_SP
02-25-2013, 04:54 PM
Could it be possible to have different thread statuses for different forums?

And if yes, options to setup them in front end of each forum would be great, really.

nhawk
02-25-2013, 05:20 PM
Could it be possible to have different thread statuses for different forums?

And if yes, options to setup them in front end of each forum would be great, really.

LOL, the pro version that allows this is being beta tested on my site at this very moment.

As it stands now, these are the features of the Pro version...

- Unlimited status definitions
- Define the forum each status definition is used in. (as opposed to a global setting in the free version)
- Define if the thread starter can change the status for each definition. (as opposed to a global setting in the free version)
- Define a usergroup that can change each status definition. (as opposed to a global setting in the free version)
- Define a usergroup that can see each status definition. (as opposed to a global setting in the free version)

Users can only clear statuses that they can set.

Example:
Status A has 'Thread Starter Can Change' set to 'No' and only UsergroupX can set this status.

Status B has 'Thread Starter Can Change' set to 'Yes' and the thread starter is in UsergroupY.

The thread starter will only be able to clear Status B.

So if a member in UsergroupX sets Status A, the thread starter won't be able to clear it and no status
options will be available to the thread starter.

Alan_SP
02-27-2013, 11:12 AM
Excellent. :up:

tanzeelniazi
02-27-2013, 11:23 AM
Great Mod Let me Check :)
Thanks

nhawk
02-28-2013, 02:32 PM
Could it be possible to have different thread statuses for different forums?

And if yes, options to setup them in front end of each forum would be great, really.

The PRO version has been released. I believe it does just about everything you want...

Thread Status System PRO (http://snogssite.com/showthread.php?1004-Thread-Status-Pro-Features)

Alan_SP
02-28-2013, 07:11 PM
Yes, it does what I asked for. :up:

Bluefin221
03-16-2013, 06:37 PM
No idea why but it doesn't work for me, I set up two options, then four options, set the usergroups who could see it, set the forums you could see it on, I even deleted my thread prefixes to make sure it wasn't them that was clashing. Does this mod clash with any other mod (known to).

Had a play around, it works in the vb default theme and also works in another theme I use, however it doesn't work in the forums theme I have selected, is there manual edits I can make so that it works properly in my theme?

psd_hunter
03-16-2013, 06:59 PM
Works perfect in 4.2.0
Great and very useful AdOn! Thanks a ton to the Coder(s) :up::)

nhawk
03-16-2013, 07:19 PM
No idea why but it doesn't work for me, I set up two options, then four options, set the usergroups who could see it, set the forums you could see it on, I even deleted my thread prefixes to make sure it wasn't them that was clashing. Does this mod clash with any other mod (known to).

Had a play around, it works in the vb default theme and also works in another theme I use, however it doesn't work in the forums theme I have selected, is there manual edits I can make so that it works properly in my theme?

At this time, there aren't any known clashes with other mods.

So far as the theme you have, thread status looks for this specific code in the following templates...

SHOWTHREAD template :
<span class="threadtitle"><a href="{vb:raw thread_url}" title="{vb:rawphrase reload_this_page}">{vb:raw threadinfo.title}</a></span>

h6><a class="popupctrl" href="javascript://">{vb:rawphrase thread_tools}</a></h6>
<ul class="popupbody popuphover">

FORUMDISPLAY template:
<option value="title" {vb:raw sort.title}>{vb:rawphrase thread_title}</option>

If those specific lines of code aren't in your templates, then thread status won't work.

Bluefin221
03-16-2013, 07:33 PM
At this time, there aren't any known clashes with other mods.

So far as the theme you have, thread status looks for this specific code in the following templates...

SHOWTHREAD template :
<span class="threadtitle"><a href="{vb:raw thread_url}" title="{vb:rawphrase reload_this_page}">{vb:raw threadinfo.title}</a></span>

h6><a class="popupctrl" href="javascript://">{vb:rawphrase thread_tools}</a></h6>
<ul class="popupbody popuphover">

FORUMDISPLAY template:
<option value="title" {vb:raw sort.title}>{vb:rawphrase thread_title}</option>

If those specific lines of code aren't in your templates, then thread status won't work.

I've just checked all of these are within the appropriate places so it must be clashing with a mod, I will report back when I find out which one it is. It can't be a mod as it works on every other template so its template specific, I have never edited those files though so I'm unsure what I should be looking for.

nhawk
03-16-2013, 07:43 PM
I've just checked all of these are within the appropriate places so it must be clashing with a mod, I will report back when I find out which one it is. It can't be a mod as it works on every other template so its template specific, I have never edited those files though so I'm unsure what I should be looking for.

The code I gave must be exactly as shown. If there is a missing space, or any different at all then it won't work.

Bluefin221
03-16-2013, 07:53 PM
The code I gave must be exactly as shown. If there is a missing space, or any different at all then it won't work.

Damn, my:

<h6><a class="popupctrl" href="javascript://">{vb:rawphrase thread_tools}</a></h6>
<ul class="popupbody popuphover">

Had 4 spaces in front of it, removed them and it works perfectly.

Nano_
03-19-2013, 11:06 AM
The PRO version has been released. I believe it does just about everything you want...

Thread Status System PRO (http://snogssite.com/showthread.php?1004-Thread-Status-Pro-Features)

PRO Link send me to Google. This link is correct?

TheSupportForum
03-19-2013, 11:41 AM
very nice mod, installed

nhawk
03-19-2013, 12:12 PM
PRO Link send me to Google. This link is correct?

If you're coming into my site by proxy or through a server site, it may send you to Google. Use your actual provider to access my site.

iask
03-23-2013, 01:40 PM
remove

nhawk
03-23-2013, 01:54 PM
Go to SHOWTHREAD
search to

<vb:if condition="$show['fb_likebutton']">
{vb:raw fblikebutton}
</vb:if>
</div>

Instead there under

<vb:if condition="is_member_of($bbuserinfo, 6,2,7,11,22,16,19)"><span class="threadtitle"><a href="{vb:raw thread_url}" title="{vb:rawphrase reload_this_page}">{vb:raw threadinfo.title}</a></span>
</script></vb:if>

The numbers you need to customize the id of your User Groups

I don't understand. What are you talking about?

There are no manual edits required with this mod.

Tim Wheatley
10-16-2013, 10:16 PM
Anybody using this with 422?

nhawk
10-17-2013, 09:54 AM
The pro version is running on my site and it's running 4.2.2

Tim Wheatley
10-17-2013, 09:45 PM
Thank you!

Glenn379
11-18-2013, 05:05 AM
It would be really great to use this from the forums menu as well as the thread. Then one could mass approve, deny, and what have you in one place.

Thoughts?

Grrrendel
11-09-2015, 09:01 AM
I would like to see the status-changes in my moderator log, any idea how to activate this? (great mod btw)

nhawk
11-09-2015, 09:30 AM
I would like to see the status-changes in my moderator log, any idea how to activate this? (great mod btw)
Sorry, that isn't possible with this add-on.

Grrrendel
11-25-2015, 02:26 PM
Ok, it wasn't that important anyway. :D May I ask you another question: would it be possible to show the status in search_threadbits as well?

nhawk
11-25-2015, 03:05 PM
Ok, it wasn't that important anyway. :D May I ask you another question: would it be possible to show the status in search_threadbits as well?

Again, that's not possible with this add-on.

Grrrendel
11-26-2015, 12:28 PM
Thanks for the quick reply. :)
(I did it with a dirty template-edit but of course that's not as nice as adding it to your add-on.)