Tab and Link Manager Lite

[Mosh]

Please click Mark as Installed if you are using this hack.

What Does This Hack Do?Silver
This hack gives you an easy way to add custom tabs, links and submenu links to the end of the NavBar. This hack has been stable since I wrote it in November 2009 and does exactly what it says on the tin. The first release of the commercial version was actually based on this version with the addition of the impex feature (which has been removed again before being released here as a Lite version).

This hack will not allow you any control over the already existing default tabs, links and submenu links added by vBulletin (Classic or Publishing Suite) nor any other third-party add-on that adds it's own tabs, links and submenu links.

Tab and Link Manager Lite offers you the following functionality:

Installation type: Co-existence Mode - where the default NavBar tabs/links/submenu links run side-by-side with T&LM engine.
Add/Edit/Delete a tab.
Add/Edit/Delete a link.
Add/Edit/Delete a submenu link.
Tabs, links and submenu links can be individually controlled by usergroup permissions.
Tabs, links or submenu links will not be viewable to users not in an authorised usergroup.
You can change the display order for individual tabs, links and submenu links.


Frequently Asked Questions

Question:
It doesn't work! Help!!!
Answer:
That does not help others help you. Please explain exactly what the issue is, give as much information as possible and that may aid others in helping you.

Question:
I have vBulletin 4.2.0 (or above) installed, will the new Navigation Manager included in vBulletin work with Tab and Link Manager Lite?
Answer:
The short answer is no it will not, as the Navigation Manager replicates the functions in Tab and Link Manager Lite in its entirety and you may as well use the Navigation Manager instead of this hack.

Navigation Manger is not included with vBulletin 4.1.12 (and lower), so you are fine using this hack.

Question:
[I]"My tabs do not highlight".... "my links or submenu links do not show up".... "when I click on a link or submenu link my tab does not stay highlighted, but highlights another tab" Help!!!!
Answer:
Information as to why any of the above are probably happening is laid out in the following post here.

Question:
I don't like the copyright branding at the bottom of every page generated by hack, what can I do?
Answer:
The only option if you want to use this hack without copyright branding is to uninstall the hack and not using it at all.


vBulletin Version CompatibilitySilver
This hack (Lite version) can be used with vBulletin versions 4.0.0 - 4.1.12.

For vBulletin versions 4.2.0 and above, you should use vBulletin's integrated Navigation Manager instead of this version.

This product will NOT work with 3.8.x and earlier as the new NavBar was not introduced until 4.0.0.


Hack SupportSilver
IMPORTANT: This hack is no longer supported.



BrandingSilver
There is a small unobtrusive block of copyright branding text at the bottom of each page generated by this hack, which is there to promote my work and allow you to use this hack for free.

You are NOT allowed to remove my copyright branding from this hack.


Install/Upgrade/Uninstall InstructionsSilver
The readme_tab_and_link_manager_lite.html instructions file is included in attached .zip file. You will need to open this file in a web browser.


Version HistorySilver
v4.0.001 - Tuesday 27th July 2010
-- Initial Release


Show Your Appreciation Silver
Although not required, if you have enjoyed the benefits of this hack, and would like show your appreciation for my efforts, then please feel free to click on the Support Developer link and donate any amount you feel is appropriate.

[homanhtruong]

Thanks. Reserved

[ascroft]

Thanks - installed this - with 2 links under the tab - however they (the links) don't appear to display when I hover over the tab - if I click on the tab it launches the URL I have on the tab.

[imedic]

Same problem here, unfortunately payed support for a free mod is a turn off for me so I will use it only for tabs. I have a vague feelind you need to pay support to use this free mode properly... ...
Maybe someone can figure it out and post it here.

[Russ_T]

Does this work for anyone? Doesn't highlight for me at all.

I have so far not found a single tab mod that works :( Anyone any ideas please?

[imedic]

With this one only tabs works, the rest of menus and submenus does not work for me.
And I am not paying 40 USD for having some simple menus in forum.
There are mods 10 times more complicated and for free ... sorry wolfs.
I am using this one only for tabs, but this should be in vb included ...

[Internetcafe]

Does this work for anyone? Doesn't highlight for me at all.

I have so far not found a single tab mod that works :( Anyone any ideas please?

There is a simply template addition that works .. Manually add Navbar link (https://vborg.vbsupport.ru/showthread.php?t=246687) :up:

You can see I got it to work for linking to my photopost gallery. DeereTalk (http://www.deeretalk.com/forums/forum.php)

[Russ_T]

Thanks, I see the link works, I managed to get that with another mod. What I'd like though is it to have it's own submenu that highlights the right link when on the page it links to.

[mgurain]

Hi,
This is great.
One thing: I have lot's of usergroups, and I had to select all to allow tab for them !
Is there an easier way to (select all) ?
Thanks,,

[Fusion2]

The pictures show how to create separate tabs, links and submenus.

My question: Is there a place where you can associate tabs with specific links and submenus, as there is no photo showing that?

Simple, if i create TAB 1, and want to display only LINK 2 and SUBMENU 3, not others?

[COL NIL SATIS]

tagged !!

[mgurain]

These did not work ! :
- links
- submenues
- highlight of active tab
I have added links & submenues but they didn't show up.
please fix ?
thanks,,

[Mosh]

The pictures show how to create separate tabs, links and submenus.

My question: Is there a place where you can associate tabs with specific links and submenus, as there is no photo showing that?

Simple, if i create TAB 1, and want to display only LINK 2 and SUBMENU 3, not others?
Sub-menu links are associated (linked) with one Link, and Links are associated (linked) with one Tab, not the other way around, so you can not create one Link and associate it with more than one Tab at the same time, same goes for Sub-menu links, they can only be associated than one Link at a time.

[Mosh]

These did not work ! :
- links
- submenues
- highlight of active tab
I have added links & submenues but they didn't show up.
please fix ?
thanks,,
There is nothing wrong with this hack at all, it is how you are utilising it on your site.... there is nothing to fix, this hack has worked bug-free for more than a year (no actual bug or error messages have ever been posted here, and that is since I released it here in July 2010).

[Merjawy]

Thanks for the mod

Tabs work just fine.. but links don't show anywhere.. I haven't tried sublinks yet

[Mosh]

Hi all,

Free support has now been moved back to vBulletin.org.

Please see the first post for more information (and also this thread (http://www.wolfshead-solutions.com/threads/444-Our-quot-vBulletin.org-Hacks-Support-quot-subscription-has-been-scrapped) at Wolfshead Solutions).

Enjoy :)

Regards,

Mosh Shigdar - Wolfshead Solutions.

[Mosh]

Thanks - installed this - with 2 links under the tab - however they (the links) don't appear to display when I hover over the tab - if I click on the tab it launches the URL I have on the tab.
Does this work for anyone? Doesn't highlight for me at all.

I have so far not found a single tab mod that works :( Anyone any ideas please?
These did not work ! :
- links
- submenues
- highlight of active tab
I have added links & submenues but they didn't show up.


Links and SubMenu Links only appear under a tab when it is highlighted.

A tab will only be highlighted if:

the file is locally installed on the forum (not an external web site)
the THIS_SCRIPT line in the local file matches the file's name (define('THIS_SCRIPT', 'XXXX'))
the tab is not pointing another tab that has the same THIS_SCRIPT line in the file
the links associated with the tab are sections related to the local file.

I will give an example below (it is bare-bones, and will not work as it is, but is an example to explain the above):

Lets say we have a file you have uploaded to the root of your forum.... say test.php, the contents are as below:
<?php
// this should be the same name as the file
define('THIS_SCRIPT', 'test');

// set to main page, if there are no arguments
if (empty($_REQUEST['do']))
{
$_REQUEST['do'] = 'main';
}

// this is the main section
if ($_REQUEST['do'] == 'main')
{
// DO MAIN STUFF
}

// this is another section
if ($_REQUEST['do'] == 'stuff')
{
// DO SOME STUFF
}

// this is yet another section
if ($_REQUEST['do'] == 'otherstuff')
{
// DO SOME OTHER STUFF
}
?>



We can create the tab and point the Tab URL to test.php or test.php?do=main.

The two links that will allow the tab to stay highlighted when either are clicked would have to have the Link URL field of each link set to test.php?do=stuff and test.php?do=otherstuff

Tab highlighting will not work if:

the Tab URL points to an external site
the THIS_SCRIPT line in the file matches another file that already has another tab that points to it
the Link URL fields do not point to sections of the same file that is pointed to by the tab they are associated with


I hope this explain things a bit, and as to why some people are having problems with getting tabs to highlight. It is not this hack that is the problem, it is how it is being utilised that is the problem.

[kether1]

Guess I am not understanding this mod.

Here is what I want to do:

I have the vBadvanced CMS as a portal page for my site. It is located in the root of the site on the same level as the forum.

I created a tab that is called portal and pointed it to index.php. It works great except for the fact that it highlights the forum.php tab that come with vbulletin4.

If I click on the forum.php tab (native to vb4) it goes to forum.php, but now, after installing this modification, it highlights the Portal tab (index.php) created by this mod.

To be clear my two links are:

http://www.mysite.com/forum/index.php (vbadvanced portal)
and
http://www.mysite.com/forum/forum.php (regular forum page)

vBadvanced comes with the ability to create a custom tab for each page created with it, but no way to easily add submenu links (or as this product calls them - 'links') to the navbar. So, I came here looking for help and found this mod.

I installed this on my test site which is vb4.1.0pl2.

It doesn't seem to matter what file I link to. Every tab I create always highlights the forum tab.

some links I tried include:

index.php
downloads.php
php_test.php

No matter the link, if it is on the site, the tab links correctly, but highlights the forum tab. The other native tab, "whats new", seems to work just like it should and is not affected by this modification.

Can you offer any advice? I cannot seem to get it to work correctly on my own.

Thank you.

[Mosh]

Guess I am not understanding this mod.

Here is what I want to do:

I have the vBadvanced CMS as a portal page for my site. It is located in the root of the site on the same level as the forum.

I created a tab that is called portal and pointed it to index.php. It works great except for the fact that it highlights the forum.php tab that come with vbulletin4.

If I click on the forum.php tab (native to vb4) it goes to forum.php, but now, after installing this modification, it highlights the Portal tab (index.php) created by this mod.

To be clear my two links are:

http://www.mysite.com/forum/index.php (vbadvanced portal)
and
http://www.mysite.com/forum/forum.php (regular forum page)

vBadvanced comes with the ability to create a custom tab for each page created with it, but no way to easily add submenu links (or as this product calls them - 'links') to the navbar. So, I came here looking for help and found this mod.

I installed this on my test site which is vb4.1.0pl2.

It doesn't seem to matter what file I link to. Every tab I create always highlights the forum tab.

some links I tried include:

index.php
downloads.php
php_test.php

No matter the link, if it is on the site, the tab links correctly, but highlights the forum tab. The other native tab, "whats new", seems to work just like it should and is not affected by this modification.

Can you offer any advice? I cannot seem to get it to work correctly on my own.

Thank you.

As the vBadvanced index file has the THIS_SCRIPT line of:
define('THIS_SCRIPT', 'adv_index');
You need to edit the file and change it this to:
define('THIS_SCRIPT', 'index');
Then the vBadvanced tab should highlight correctly.

[kether1]

Thank you sir. I will give it a go.

Edit: Tried it. I edited the index.php file and changed the this_script line as indicated. I still get the same issue. Thanks for trying to help though. I appreciate it.

Regards,
K

[Old-Git]

I've been playing with this today and I am seeing the same problem as the others, the wrong tab is highlighted!

What I've done is very simple

1.) I've taken a copy of forum.php and renamed it archives.php
2.) I've edited archives.php to reflect this rename; define('THIS_SCRIPT', 'archives');
3.) I setup my tab to call archives.php?f=xx

Everything works as it should do except the focus remains on forum button! So, should I be doing something else like defining a phrase or something like that?

PS - I've discovered that if I simply call archives.php without the ?f=xx that the correct Archives tab highlights perfectly. The problem would appear to be a disjoint between the THIS_SCRIPT setting and the arguments being handed to the PHP file upon execution. Presumbaly this is fixable because if I use a simple piece of code to create a tab in the plugins section then this problem is not evident. Can anyone provide a solution or workaround for this?

[Mosh]

I've been playing with this today and I am seeing the same problem as the others, the wrong tab is highlighted!

What I've done is very simple

1.) I've taken a copy of forum.php and renamed it archives.php
2.) I've edited archives.php to reflect this rename; define('THIS_SCRIPT', 'archives');
3.) I setup my tab to call archives.php?f=xx

Everything works as it should do except the focus remains on forum button! So, should I be doing something else like defining a phrase or something like that?

PS - I've discovered that if I simply call archives.php without the ?f=xx that the correct Archives tab highlights perfectly. The problem would appear to be a disjoint between the THIS_SCRIPT setting and the arguments being handed to the PHP file upon execution. Presumbaly this is fixable because if I use a simple piece of code to create a tab in the plugins section then this problem is not evident. Can anyone provide a solution or workaround for this?

What exactly are trying to do (the end result)? Be as detailed as possible.

[Old-Git]

I have 'archive' forums which are set as not active so they don't show up on the main forum page. I am attempting to use forum.php?f=xx to display those forums on their own page. xx is the forum ID of the top category forum under which all my archive sub-forums reside.

Obviously if I do this with forum.php I get to see my archive forums but the highlight remains on the forums tab because that is what forum.php is coded to do. So I have 'cloned' forum.php and renamed it archives.php and then called it from the new Archive tab, as I would forum.php, (only difference is I edited the THIS_SCRIPT setting in my cloned file so that it says 'archives' rather than 'index'). All this is correct and if I call archives.php without passing any parameters to it it works fine and highlights the Archives tab I created (but it does not show my archive forums only the main forum page...I need to hand it the forumid of my 'archives' in order to see them). However, if I call archives.php and hand it ?f=xx (where xx is the forumid) then it refuses to highlight the Archives tab. Calling archives.php and the highlight stays on the Archives tab. Calling archives.php?f=xx and it does not highlight the archive tab but reverts to the forum tab. Doesn't matter which tab I was on before clicking the Archives tab it always reverts to the forum tab. Any ideas?

[Mosh]

I have 'archive' forums which are set as not active so they don't show up on the main forum page. I am attempting to use forum.php?f=xx to display those forums on their own page. xx is the forum ID of the top category forum under which all my archive sub-forums reside.

Obviously if I do this with forum.php I get to see my archive forums but the highlight remains on the forums tab because that is what forum.php is coded to do. So I have 'cloned' forum.php and renamed it archives.php and then called it from the new Archive tab, as I would forum.php, (only difference is I edited the THIS_SCRIPT setting in my cloned file so that it says 'archives' rather than 'index'). All this is correct and if I call archives.php without passing any parameters to it it works fine and highlights the Archives tab I created (but it does not show my archive forums only the main forum page...I need to hand it the forumid of my 'archives' in order to see them). However, if I call archives.php and hand it ?f=xx (where xx is the forumid) then it refuses to highlight the Archives tab. Calling archives.php and the highlight stays on the Archives tab. Calling archives.php?f=xx and it does not highlight the archive tab but reverts to the forum tab. Doesn't matter which tab I was on before clicking the Archives tab it always reverts to the forum tab. Any ideas?

I can see what you are trying to do, and it is not doable with the Lite version of this hack. However, it is with the full version..... you can see a demo of it in action on my site (link in the first post) by clicking on the Forum Tab Demo tab (the type will work with both visible and invisible forums) and no need to replicate and rename files etc,.

If you have more questions regarding the full version, register on my site and ask them there please.

[Old-Git]

Oh I know it's doable. This simple piece of code below will permit me to do it if I load it as a plugin.

$tabselected = '';
$tablinks = '';
if (THIS_SCRIPT == 'archives')
{
$vbulletin->options['selectednavtab']='archives';
$tabselected = ' class="selected"';

}
$template_hook['navtab_middle'] .= '<li'.$tabselected.'><a class="navtab" href="archives.php?f=14">Archives</a>'.$tablinks.'</li>' ;


The only problem with this bit of code is that whilst it gives me the Archive tab and also highlights it, it does not inlude any code to provide the submenu. I think I've isolated the code for the submenu but I haven't yet figured out how to marry the two together...but I'm working on it.

re the commercial version;

1.) IMO, the inability of the lite code to handle parameters passed to the PHP file in the tab url is a bug that needs fixing

2.) Given that opinion, I'm not likely to consider the commercial version until I see bugs in the lite version ironed out. If I want the commercial version it'll be for the additional features not for a bug fix that won't be fixed in the lite version. Not fixing bugs in the lite version does not send me the right message.

3.) I can't be sure that the commercial version will behave any better than the lite version, or that it won't throw up other issues that need to be dealt with. So again where's my incentive here.

Sorry Mosh but I'm just not getting enough incentive here to trust to the commercial version. As it stands your product is now lumped with all the other 'Add-A-Tab' products that either don't highlight or don't provide a properly, functioning sub-menu. Just one more thing I tried but hasn't delivered what I need. Look over all the threads and you'll see lots of guys like me just trying to do something simple and move on (none of us are coders, or want to be coders), we just need quick solutions to allow us to get it done. And maybe it's not the fault of the coders that these things are so problematic, most likely the fault lays firmly and squarely with the VB product, after all something like this should come as standard in the product.

All that said though, you are close to getting it right with this lite product Mosh and if it didn't have this issue I'd be using it. I'd even be looking at the commercial product because I do like the look of the extra features and I would want the copyright removed from my pages. However....!

[Old-Git]

BTW Mosh, if you're looking for another product to add to your stable you couldn't go far wrong if you gave some thought to porting VBAY to 4x. Have a look at the thread for that product and see just how many people would like to have it on 4x. The original coder has not updated it in ages and it is wanted!

[Mosh]

1.) IMO, the inability of the lite code to handle parameters passed to the PHP file in the tab url is a bug that needs fixing

2.) Given that opinion, I'm not likely to consider the commercial version until I see bugs in the lite version ironed out. If I want the commercial version it'll be for the additional features not for a bug fix that won't be fixed in the lite version. Not fixing bugs in the lite version does not send me the right message.

Definition of what a software bug is - http://en.wikipedia.org/wiki/Software_bug

What you are asking for is a feature request..... it is not a bug. This lite version can not do what you ask because I have not added it in.

[Carpesimia]

Mosh,

This is almost PRECISELY what Im looking for. The piece Im hung up on, though, is having to supply some sort of dummy page for the tab. I mean, here's what I want:

A new tab. When someone clicks the tab, it gives them new menu options across the secondary menu.

Now, do i stick a page in there? If so, how to I make a vbulletin shell page? I had just copied forum.php to links.php, and changed the THIS_SCRIPT, but if i just reload the forum page, people arent going to notice the new scripts.

Anyways, i think this is the piece of the puzzle that people are missing. Im off in search of a way to add a page inside vb thats not really vb.

[odln018]

Exactly, that's what I'm missing as well.

[Kahuna900]

Is there anyway to get the highlighting working with photopost classifieds?

[odln018]

Exactly, that's what I'm missing as well.

Here's what I'm trying to do:

Create tab called "Admin"
Create sublinks - "AdminCP", "PHPINfo", "PHPAdmin"

Could I get some help? I'd like to get this running before I buy the product.

[Mosh]

Mosh,

This is almost PRECISELY what Im looking for. The piece Im hung up on, though, is having to supply some sort of dummy page for the tab. I mean, here's what I want:

A new tab. When someone clicks the tab, it gives them new menu options across the secondary menu.

Now, do i stick a page in there? If so, how to I make a vbulletin shell page? I had just copied forum.php to links.php, and changed the THIS_SCRIPT, but if i just reload the forum page, people arent going to notice the new scripts.

Anyways, i think this is the piece of the puzzle that people are missing. Im off in search of a way to add a page inside vb thats not really vb.

Exactly, that's what I'm missing as well.

This is the only article I can point to :- [HOW TO - vB4] Create your own vBulletin page (https://vborg.vbsupport.ru/showthread.php?t=228112)

[Mosh]

Is there anyway to get the highlighting working with photopost classifieds?
Quite possibly, but am not 100% sure, as I am pretty sure it is a paid product and I do not own nor use it.

[Mosh]

Here's what I'm trying to do:

Create tab called "Admin"
Create sublinks - "AdminCP", "PHPINfo", "PHPAdmin"

Could I get some help? I'd like to get this running before I buy the product.
What you want to do is probably not possible, as I am pretty sure that the AdminCP, PHPInfo() or PHPAdmin do not use the vBulletin front-end template system and the tab will not stay highlighted, nor will the pages open in the vBulletin front-end.

[NgocTam]

Link down Tab and Link Manager 4 v4.3.0 ???????????

[Mosh]

Link down Tab and Link Manager 4 v4.3.0 ???????????
It is a commercial (paid) product and the link to the product is in the first post, this is just the lite version.

[Manoel J?nior]

Very usefful!!!

Thanks!

[ultimategeek]

i have just downloaded this Mod but before i install it:

i can't find /includes/nbtalm_plugins in my ftp client :confused:

i find /includes but not the rest, i am using filezilla and vBulletin 4.1.6

the only options are:

api
block
cron
datastore
facebook
paymentapi
xml

[Mosh]

i have just downloaded this Mod but before i install it:

i can't find /includes/nbtalm_plugins in my ftp client :confused:

i find /includes but not the rest, i am using filezilla and vBulletin 4.1.6

the only options are:

api
block
cron
datastore
facebook
paymentapi
xml
Just upload the /includes/nbtalm_plugins folder and it contents to your forums /includes/ folder :)

[ultimategeek]

Just upload the /includes/nbtalm_plugins folder and it contents to your forums /includes/ folder :)

Thank you

[ultimategeek]

i did this and now i get this error:

Warning: include([path]/includes/nbtalm_plugins/process_templates_complete.php) [function.include]: failed to open stream: No such file or directory in [path]/includes/class_bootstrap.php(537) : eval()'d code on line 16

Warning: include() [function.include]: Failed opening '[path]/includes/nbtalm_plugins/process_templates_complete.php' for inclusion (include_path='.:/usr/local/php52/pear') in [path]/includes/class_bootstrap.php(537) : eval()'d code on line 16

[Mosh]

i did this and now i get this error:

Warning: include([path]/includes/nbtalm_plugins/process_templates_complete.php) [function.include]: failed to open stream: No such file or directory in [path]/includes/class_bootstrap.php(537) : eval()'d code on line 16

Warning: include() [function.include]: Failed opening '[path]/includes/nbtalm_plugins/process_templates_complete.php' for inclusion (include_path='.:/usr/local/php52/pear') in [path]/includes/class_bootstrap.php(537) : eval()'d code on line 16

It looks like you uploaded just the contents of the /includes/nbtalm_plugins folder to your forums /includes/ folder, and not the /includes/nbtalm_plugins folder and it contents to your forums /includes/ folder. So if you do what I originally advised, then you should be good to go :)

[ultimategeek]

Thanks Mosh.
when i put a link in, how would you get it to open in other window?
at the minute you are taken away from the forum

[Mosh]

Thanks Mosh.
when i put a link in, how would you get it to open in other window?
at the minute you are taken away from the forum

There is no target attribute in this Lite version, please check the first post for a comparison of features between the Lite and full versions.

[BrightStar]

Thanks for the mod....great one.

A couple of questions

1) I created a new tab so when someone points on it, it opens a sub menu with linked defined under that tab. Is it possible?

2) What exactly is a tab? It is supposed to take us to some page or leave it's URL as blank? And then in links menu defined links connecting with that particular tab?

I thought the whole idea was to have a drop down menu from the tab with links defined.

[Mosh]

1) I created a new tab so when someone points on it, it opens a sub menu with linked defined under that tab. Is it possible?

See this post.

2) What exactly is a tab?

https://vborg.vbsupport.ru/attachment.php?attachmentid=120116&d=1280203052

As shown in the picture above, the tabs in this case are Forum, What's New and Tab & Link Manager Lite (which is highlighted).

It is supposed to take us to some page or leave it's URL as blank?

Yes.

Tabs are always associated with a URL, see this post.

And then in links menu defined links connecting with that particular tab?

[MGP_Tech]

Hi Mosh,

I had the private support thread over at your site before you closed the paid support. I had asked how to add a "Thread's You're In" link and you provided me with the necessary code but now they are locked and I can't view it.

Could you paste the link code here please? Thank you!

[Mosh]

Hi Mosh,

I had the private support thread over at your site before you closed the paid support. I had asked how to add a "Thread's You're In" link and you provided me with the necessary code but now they are locked and I can't view it.

Could you paste the link code here please? Thank you!

I can not provide paid support here..... the reason why you do not have access to your paid product is because your Tab and Link Manager download/support access expired over a month ago and you will need to renew it at Wolfshead Solutions to gain access again.

If you need to discuss this further you will need to post at Wolfshead Solutions because of vBulletin.org rules.

[MGP_Tech]

Oh, I thought I saw a post you made saying paid support was discontinued and to direct all inquiries here.

I don't need any update downloads or anything, I was just hoping you could tell me the url to use in my tab for showing a member posts they're in, thanks.

[Mosh]

Oh, I thought I saw a post you made saying paid support was discontinued and to direct all inquiries here.

I don't need any update downloads or anything, I was just hoping you could tell me the url to use in my tab for showing a member posts they're in, thanks.
That was for my vBulletin.org hacks when I provided support at Wolfshead Solutions for them (which I no longer do). But, you purchased the commercial version of this hack and your yearly download/support access has expired. I have never provided you support for the Lite version (here or at Wolfshead Solutions)..... I can not help or talk about the commercial version here (as per vBulletin.org rules), so please do not ask again.

[mgurain]

After upgrading to 4.2, this should be uninstalled right ?
Thanks for your work Mosh.

[Mosh]

After upgrading to 4.2, this should be uninstalled right ?
Thanks for your work Mosh.

Yes, you may as well, as the new Navigation Manager included with vBulletin 4.2.0 and above does about the same thing this Lite version does..... so no point leaving it installed.