Who has read a Thread

[Martini-man]

[:]
Who Has Read a Thread

Installing : Version 4.1.2 ; Revision: 1.51

Please remember to Mark as Installed at vBulletin.org

Processing : Version 4.0.1

vB_Database_Alter: fetch_table_info() has not been called successfully.
MySQL server has gone away

Same ol' error :(

I just can't figure it out, never works.

[Paul M]

Your mysql timeout is far too low, so its timing out while loading the existing data.

[djbaxter]

...or your hosting has too many sites on the same shared server, or someone else on the shared server is using too many resources.

Either way, this is a server issue: You need to contact your host.

[Martini-man]

Thanks. It was all I needed to hear :)

[lostguy]

Can i know this work with Vb 4.1.1 ?

[lostguy]

Help me pls

im user vb 4.1.1

Something just when wrong here sum preview :

[horussjr]

1. do yout have this problem with all the styles? if not, it's a style problem
2. are you using other hacks related to users and threads? if yes try deactivating them one at a time and see were is the conflict
3. try to uninstall and reinstall first of all

[Vowgaming]

Is there any chance you could change this mod to show users posted

The reason for this is we have a gaming clan site and one rule of the site is to respond each month to the current monthly checkin thread.

It is becoming an issue to have to manualy check through the thread and tick of each user.

[Paul M]

No, there is no chance of that.

You do know you can see who has posted in a thread by clicking on the "Replies" count on any thread listing ?

[Vowgaming]

Thankyou for your quick reply and the helpfull tip, this will do the job fine for the moment and once I get familar with vbull I might try and create a monthly checkin module to automate the whole process.

But again thankyou for the tip being new to vbulletin I'm finding new things out everyday.

[V8Owner]

Hi Paul M,

This is a very handy mod and have it on a few of my forums. Currently on one of my forums running 4.0.8 we also run Tapatalk.

We have discovered that if a post is read via tapatalk it does not register with this mod. Today i updated your mod & Tapatalk to the latest version and still it does not work.

I am not sure if the issue lies with the mod or Tapatalk?
I thought i would ask here first.

Regards,

V8Owner

[Paul M]

That would most likely be tapatalk not running the appropriate hooks when viewing a thread.

[Valerio]

So this one it work also in vbulletin 4.1.1 and 4.1.2?

[Paul M]

Its for 4.0.8 onwards. :)

[elz3abi M.D]

Suggestion : can u please add an option to show invisible user to all members or certain group cuz now if iam a thread owner but don't have the permission to see invsisble user i will not be able to see them all in this hack .

thanx

[Rofo]

Thanks Paul. Marked and rated.

[Poker Face]

In version 4.1.2, I am missing borders and first line is indented... causing page error?

http://www.brownave.com/filecab/images/read_thread.jpg

[Paul M]

Check your Display_Readers.. templates, make sure you are not using any old versions (revert them if you are).

[FTForums]

Thanks Paul - you are a star!

[Poker Face]

Check your Display_Readers.. templates, make sure you are not using any old versions (revert them if you are).

Updated version from 4.0.14 to latest 4.1.2 and that provided the borders...

The indentation of the first name remains - indented.

Thank-you for the suggestions! :up:

[elz3abi M.D]

Hi Paul , are considering my suggestion :(

[Paul M]

Sorry, no, I wont be doing that in the forseeable future.

[BadgerDog]

Hi Paul .... :)

Just updated our site from 4.04pl1 to 4.1.3 and then updated ALL your mods accordingly ... :up:

We're now running 4.1.2 of this mod and I started receiving emails from members that they can no longer view who has read a thread that they started? They now get a message saying that they aren't permitted to view the list of names. (see pic)

I went to the AdminCP and checked, but I have the "Allow Thread Author" box (If set to yes then this allows the thread creator to see the who has read display whatever usergroup they are in.) set to YES, so I'm not sure what the problem is that has changed?

Way back in the earlier version, I had that problem with Google CSE displaying private threads which you verified was a bug and then you had me make an EDIT change to the XML file to fix that, as I wasn't able to update to a more current version of this mod because I was still stuck with 4.04. I only mention it as I wasn't sure if that's a factor in this problem, but I doubt it as I assume the importing of 4.1.2 contained all the fixes necessary?

The authors of the threads are also a members of usergroups which are not checked off with permissions to see the list of names, but that wouldn't be a problem would it?

Any help would be appreciated ... :up:

Regards,
Doug

[Paul M]

The authors of the threads are also a members of usergroups which are not checked off with permissions to see the list of names, but that wouldn't be a problem would it?
That would be exactly the reason.

"Allow Thread Author" only allows them to see the actual box - if they dont have names permission then they still wont see the names.

[BadgerDog]

That would be exactly the reason.

"Allow Thread Author" only allows them to see the actual box - if they dont have names permission then they still wont see the names.

Gotcha ... :)

For whatever reason, these folks who have been complaining are thread starters (authors), who no not belong to the selected user groups, but claim with the previous version of this mod under 4.04 of vBulletin, were able to read the user name list.

Being an Admin myself and part of user groups allowed to view the list, as well as click on names for more info, I've never had an issue with either this version, or the old version.

I'll go back and check the user group options again and see if I can somehow permit the thread starters to see more than just the box by adding them to a user group.

Thanks Paul ... :)

Regards,
Doug

[Paul M]

Names permission was only added in the last version (4.1.2).

[UKCE_Hitman]

installed thx

[BadgerDog]

Names permission was only added in the last version (4.1.2).

Ahhh... that explains it Paul ..

Thanks .. :)

Regards,
Doug

[COL NIL SATIS]

spot on as always!!!! thanks for this Paul

[DebtFree]

I've installed this mod, thank you for it, I have set Days Limit to 0 but its only showing the last 7 days or so, should it be showing from the start of the thread or will it be only the last few days because I've only just installed it? I'm running the latest vb4.14.

[Paul M]

Sadly, its not a time machine :)

It can only show from when its installed.

[DebtFree]

Sadly, its not a time machine :)

It can only show from when its installed.I did think so......stupid question really :)

[cameraguru]

thanks installed and marked as install ;)

[Mo HaRbI]

Installed thanks Pual

[p30suite]

thanks paul :)

[addamroy]

Will this work correctly on 4.0.7?

[Paul M]

No.

[Hippy]

hi Paul..
just a heads up..
update needed the names are over lapping..

a fix ??

thanks bud

[Hippy]

I may of gotten mixed up...

looks ok today .. then again I have no idea w I was looking at yesterday ..

but I could still be wrong..

enjoy Paul and thanks again for providing your great mods

[vanquish.securi]

Works great on 4.1.7 default temp. Marked.

[Hippy]

hi Paul..
just a heads up..
update needed the names are over lapping..

a fix ??

thanks bud

name over lapping on this mod as well but for some reason not all the time..

noticed it here
too
https://vborg.vbsupport.ru/showpost.php?p=2255814&postcount=503

[Paul M]

Yes, a template system bug fix in 417 causes this.
I had to make some changes in vB itself because of this, but havent had the time to fix my mods atm.

[Hippy]

thanks paul..

[pantani]

Nice mod, thanks fot this ;)

[Trevor Matthews]

Names over lapping so had to uninstall it. 4.1.7
Really sad to see this mod go.

I hope you have time to get it going again.

[Paul M]

You do realise you can just turn off the namelist ?

[Trevor Matthews]

I'm not even sure what that means Paul :D

Do you mean I should have turned the mod off without un-installing it?

[Paul M]

There is a setting "View Thread Readers Usergroups" which controls which usergroups can see the name list.

[Trevor Matthews]

I see what you are saying now.
I think that may have been set to admin only.
Right so the overlap doesn't matter really as only I see it.

Better get it re-installed now, it was very useful.

[Trevor Matthews]

Installed, set to admin only.

[Paul M]

Updated: This is now available for the 4.1.x series of vBulletin only.

[Hippy]

thanks Paul..

[misericorde]

Thank you

[Trevor Matthews]

Many thanks.

[Hippy]

Paul was (Set Date) (Clear Date)

removed ?

thanks

[Paul M]

Nope.

[Hippy]

templates are un touched ..
why would I not be seeing it ..?
setting or something ??

thanks..
Paul

disregard this Paul
I found the setting ..
must of reset when updated the mod ..
thanks once again for providing your great work for everyone!

[lapiervb]

Hmmm..... I have it all setup and setting configured however I dont see it anywhere? Did I miss something?

[karkey]

Hello,
Having upgraded again, im looking at changing the look of the view
IE

Text colour and background as im getting a style conflict

I've looked in the CSS in the templates but cannot find anything relevant, could someone point me in the right direction please ?

Thank you.

[karkey]

Hmmm..... I have it all setup and setting configured however I dont see it anywhere? Did I miss something?

Hello,
Should be below the thread

http://img545.imageshack.us/img545/344/whoread.jpg

[imported_Vishalsachar]

Brilliant work.

[Milance]

Please how do I change the color that is not white can not do it!

[Paul M]

Add the appropriate css for the text colour in the custom_wrt.css template.

[Milance]

In order for the color of the text, but how do I replace the background is not white like in the picture?
How do I change the background is not white ?

[Paul M]

I just told you, edit the css.

[Erica1977]

In order for the color of the text, but how do I replace the background is not white like in the picture?
How do I change the background is not white ?

Put this code in CSS Templates/ addtional.css
.pemtable .alt1 {
background: none repeat-x scroll center bottom #2c2c2c;
}
.pemtable .alt2 {
background-color: #202020;
}
.pemtable .left {
text-align: left;
}
.pemtable .right {
text-align: right;
}

[etca]

works on 4.1.7,
thx paul :)

[DEREKTROTTER]

Thanks for this. I'm glad there is an updated version for 4.1.7. This will sure come in handy.

[Milance]

Put this code in CSS Templates/ addtional.css
.pemtable .alt1 {
background: none repeat-x scroll center bottom #2c2c2c;
}
.pemtable .alt2 {
background-color: #202020;
}
.pemtable .left {
text-align: left;
}
.pemtable .right {
text-align: right;
}




thanks !

[BlackThorn]

Thanks for updates Paul M.

[lapiervb]

So where can I get the one for 4.1.7?

[kfyonur]

how can i fix this problem ?

[Paul M]

Are you using IE8 ?

[kfyonur]

yes i am using IE8

[Paul M]

Its an issue with IE8, which I simply dont have time to investigate atm.

You may be able to stop it by altering the "Enable Directional Markup Fix" setting in your language settings.

[Maxii]

need for 4.1.7

[Bassam778]

Updated: This is now available for the 4.1.x series of vBulletin only.

Greetings Paul,
It's not working with VB 4.1.5
Thank you

[Paul M]

Did you read it ?

** This modification is available for vBulletin 4.1.8 onwards only **

[Fready]

Paul, is there any reason why you don't or didn't leave the older xml versions for others who use the earlier versions of vB 4, so they can still use the mod?

[Paul M]

It simply something I dont do as uploading the new version simply replaces the old, and I dont support multiple versions - therefore I only make the current version available. However, I have made exceptions in the past for unusual circumstances, so if there is a demand, I may find time to attach the final 417 version.

[OldSchoolDSL]

Another good modification Paul M

Thank you :)

Installed and working 4.1.8

[Paul M]

The older (pre 418) version is now attached to the main post.
This is for vBulletin versions 4.1.0 - 4.1.7 only.
Please note that the older version is NOT supported. There is no 4.0.x version available.

[1320Nation]

Paul M,

So where is the updated 4.1.8 mod version file at?

417-Who-has-read-thread.xml= when opened up inside file states this is mod version 4.1.7.

[Paul M]

Well, there are two files, and you checked one, so take a guess. :)

[Replicators]

Well i am running vbulletin 4.1.9 but all i am getting in the box is Array, but i don;t know if it's the mods fault or because of a pre-existing error on the board which prevents it.

Edit: nvm, it's the "Thread Information" block which shows array for those that are reading thread.

However i am getting double comma's in the who read thread block.

[TheSupportForum]

this works perfect on 4.1.9
just the MOD i was looking for, and fits perfect for what i need it for

[Gn_Snake]

Hi,
same error for Who-has-visited plugin, i have two comma for nick name.

Any idea?

P.S.
I running VB 4.1.9

Thanks

[Paul M]

Same answer. Refer to the other thread.

[Trevor Matthews]

Installed and working nicely on my new 4.1.10 upgrade.
Thanks Paul.

[Stefan118]

I have installed version 4.1.8 of this mod.
I updated 2 days ago to vB 4.1.10, and now it looks like this (attachment).

Any idea how i can make the names not overlap eachother?

[Hippy]

revert edited templates..
and if you read back a page or 2 you'll see more on this topic..

working perfect in vb4.1.10

[d19rnyxx]

Hi Paul
I just disabled the mod and my forum has gone down and displays a 503 error.

[Paul M]

I dont really see how disabling it could do that, 503 is an http Service Unavailable Code.

If you have disabled it, this cannot really be doing anything.

[RedHotChili]

Paul,

I had installed your 3.8 version of this mod on my live board a couple years ago and was wondering how to proceed here. I just upgraded my 3.8 forum to 4.1.10 on a testbed on my local machine where I'm adding customization and mods before going live with it on the internet.

After my upgrade I can see that this mod "Who Has Read a Thread" is listed at the bottom of the vBulletin Options list in the Admin CP and when I click on it the mod CP page opens up.

Question (and I tried searching this thread to see if someone else asked about this): Is it best for me to uninstall the vb3.8 version and then install this vb4 version, or can the vb3.8 version be upgraded? I don't mind losing records of who read old threads - that's not important to me. What is important is installing this excellent mod as cleanly as possible for future use once I go live with my vb4 version.

TIA

[Paul M]

Just install the vb4 version, it will remove any older versions of itself.

[RedHotChili]

Just install the vb4 version, it will remove any older versions of itself.

:up:

Thanks man! Keep up the good work! :)

[alhidaya]

Hello Paul,

Very Nice... Good work !!! Thank you very much

It s ok for vb 4.1.1.0 ?

[speedracer68]

Is there any way to record each time a person reads a thread? I am doing some research and I am trying to watch some threads to see when and how often people return to it rather then only the last time they visited.

[Hippy]

see the first screen shit in the first post .. click view readers will have a history of what thread those people read ..

[speedracer68]

see the first screen shit in the first post .. click view readers will have a history of what thread those people read ..

I am not looking for a list of what a person read.

I looking to see who has read a post and for it to log each time they read it. Say it's a hot thread and I want to know how many times and when each person read it. Rather then the last time I need every time.

For example. If Bob reads a thread I want to see he read it on Monday, twice on Tuesday and once on Saturday. Record all visits. Not just the last visit.

I have read the info in the first post and I don't see anything that helps me with this.

Am I out of luck? It's a cool hack and I hope what I'm trying to do can be done.

[speedracer68]

If this does not do this but could with some funding I would be happy to discuss it.

[Paul M]

You obviously cannot log specific posts, only the thread.

The member view lists every thread they have visited, and if they visit a thread three times, its listed three times. However, there is no in-built functionality to filter the display on a single thread.

Also, the data is only kept for a few days (you can configure that tho.).

[speedracer68]

When clicking on the "view readers" the list of members that have read the thread appears, however, what is logged is only the latest visit, while prior visits to the same thread are removed. Is it possible to log all visits and not just the latest one?

[Paul M]

Sorry, Im confusing this with something else - no, this doesnt track multiple views like that.

[Nirjonadda]

working on vb 4.1.10

[speedracer68]

Sorry, Im confusing this with something else - no, this doesnt track multiple views like that.

Thanks for the reply.

Any chance yourself or anyone else knows of a way to see who has read a particular thread and when it was each time they came back to read it again?

[RedHotChili]

Installed!

Thanks Paul! :up:

[thermax04]

Installed v4.1.8.0 on VB 4.1.10 but with some questions:

1- aim the forum Admin and want to see which Members who have read the thread for other thread creators not only mine. (If someone wrote a thread, I can not see who read his thread)

2- In my threads I can not see when the users read my thread, I just have this --> Actions : (View-Readers) (Set Date) but when I click on them It says : you do not have permission to access this page!

although I selected yes and all to all the options!!

3- can i move the location of info box, since it is now comes between Similar Threads and Tags for this Thread, can i move it up after Thread Information or even next to the thread it self like in POst thank you hack?

[Dwarden]

i would like to see small improvement for this modification

1. setting to enable/disable the visibility of reader's names list
(in case i want to see the list there is the view 'readers', so for some forums it's would be more usable)

2. and another setting to make the section be collapsed by default instead expanded
(works only if 1 is disabled)

thanks for considering it and improving the modification

[Paul M]

I dont have the time atm, but I have a list of requests I keep, so I'dd add this.

TBH, I dont quite understand the first request either.

[Paul M]

Updated due to the removal of the old collapse images in 4.1.11 - the replacement images are actually available in 4.1.8, 4.1.9 & 4.1.10 so you can update to the new version even if you havent upgraded from them to 4.1.11 yet. vBulletin versions prior to 4.1.8 are not supported by the current version (for 4.1.0 to 4.1.7 you can use the file prefixed with 417). vBulletin 4.0.x is not supported at all and no version is available to download.

[Trevor Matthews]

Many thanks. Updated.

[thermax04]

Updated due to the removal of the old collapse images in 4.1.11 - the replacement images are actually available in 4.1.8, 4.1.9 & 4.1.10 so you can update to the new version even if you havent upgraded from them to 4.1.11 yet. vBulletin versions prior to 4.1.8 are not supported by the current version (for 4.1.0 to 4.1.7 you can use the file prefixed with 417). vBulletin 4.0.x is not supported at all and no version is available to download.

I upgraded to 4.1.11, so which file should I use?

[1320Nation]

I upgraded to 4.1.11, so which file should I use?

You actually quoted the answer to your question.
(for 4.1.0 to 4.1.7 you can use the file prefixed with 417)


Means you should use: Who-has-read-thread.xml

[Dr.osamA]

thank you for update

[aquariumpros]

Any idea as to why this shows as "You don't have permission to view the list of names" to usergroups who have been given permissions to see it???


See:
https://vborg.vbsupport.ru/

https://vborg.vbsupport.ru/

[IainMustardGas]

Thanks alot for this nice little mod :)

[start2008]

I got a fatal error:

"Fatal error: Maximum execution time of 30 seconds exceeded in /home/user/mysite.com/includes/adminfunctions_template.php on line 1059"

I can't continue installation or even uninstalling it, So, I disabled it temporarily to access my threads.

Is there any help?

I'm using vb 4.1.11

[aquariumpros]

Hello??

Any idea as to why this shows as "You don't have permission to view the list of names" to usergroups who have been given permissions to see it???


See:
https://img.skitch.com/20120309-gg799srg7s94pax5trw2xec6tp.jpg

https://img.skitch.com/20120309-b2432nfctcfxy15xkqweb8cfkr.jpg

[Alan_SP]

With your skin it's really hard to say what's selected, or what isn't. If you want to select all usergroups in first option (Usergroup restrictions) just select All, not all usergroups, but option All (at the very beginning).

[aquariumpros]

With your skin it's really hard to say what's selected, or what isn't. If you want to select all usergroups in first option (Usergroup restrictions) just select All, not all usergroups, but option All (at the very beginning).


I'm aware of how it's SUPPOSED to work - however regardless of the settings, it's NOT working.

[Paul M]

It is working, but its not controlled by anything in your screenshot.

Its the "View Thread Readers Usergroups" option.

[aquariumpros]

It is working, but its not controlled by anything in your screenshot.

Its the "View Thread Readers Usergroups" option.

Again - yes - I'm aware of that.

Forget the screenshot - I was only trying to show that I had tried BOTH the single "ALL" entry as well as selecting "ALL the entries".

The point being is that I have it set for ALL to view who has read - yet only Admins can view the info - the rest of the usergroups is shows the "No Permission" error.

There is some actual issue other then the implication that I'm not setting it correctly.

[Paul M]

Again - yes - I'm aware of that.
The rest of us, however, are not aware of what you may be aware of.

As I stated, its working fine (I have tried it on two different test sites) using both the ALL option and selecting individual usergroups.

[Hippy]

The rest of us, however, are not aware of what you may be aware of.

As I stated, its working fine (I have tried it on two different test sites) using both the ALL option and selecting individual usergroups.
yes working perfect..........
does as stated 100%..
thanks Paul M for making this mod available for everyone

[aquariumpros]

The rest of us, however, are not aware of what you may be aware of.

As I stated, its working fine (I have tried it on two different test sites) using both the ALL option and selecting individual usergroups.

Unfortunately it's WAS NOT working for me despite the settings being correct.

After uninstalling the mod and reinstalling a few times - it appears to be working now...

[Alan_SP]

This could happen. Reinstalling helps even in some situations after upgrade of vBulletin as well.

[JabirA]

Installed on 4.1.12. Thanks!
Should be default in vBulletin!

[Paul M]

Should be default in vBulletin!Indeed.

[RedHotChili]

Hey Paul, in the "Members who have read this thread" listing, how can I get rid of the html markup on usernames?

I've learned that this is typically done by replacing username in the code with musername.

I came across this string of code:

$wrt['header'] = construct_phrase($vbphrase['wrt_who_viewed_threads'],$readlist['username']);


...and made this change:
$wrt['header'] = construct_phrase($vbphrase['wrt_who_viewed_threads'],$readlist['musername']);

But this didn't do it for me, which leads me to believe that another instance of "username" must be changed to "musername".

Can you tell me please which one it is?

TIA

[Paul M]

I think you have it backwards, musername is the Markedup username.

[RedHotChili]

I think you have it backwards, musername is the Markedup username.

You mean there's logic to that code stuff you guys write? :D

I'll see if I can figure it out from here. :)

[1320Nation]

How often does this feature update itself? Example; I created a thread and then saw where two additional members posted in it not long after I did. I then look near the bottom of the page of the thread to see who all has viewed the thread and it only showed my name. So in other words at least 3 people that I now had viewed the thread, but it only list one name.

[Paul M]

Are you sure you are talking about the 'Who Has Read' display and not the 'Active Users Viewing' display.

[Pandemikk]

Hi Paul,

collapse_collapsed40b.png doesn't exist.

collapse_collapsed_40b.png does exist.

Please update showthread_getinfo accordingly. :D

[Paul M]

Im not following you, where is either of them used ?

[Pandemikk]

Sorry,

For some reason:

$wrt['collapse'] = '_collapsed';
Was:
$wrt['collapse'] = 'collapsed';
in the plugin code. I checked the product.xml file and saw that it was correct.

[Hippy]

Paul M I Didn't know where to ask
Vb4.2 has your mods integrated in it
and it disabled this one when upgraded..

this mod had the "Actions : (View-Readers) (Set Date)" But it's no longer there
is it gone ? or I have to turn it on?

If I turn this mod on, all is there . but It shows the one vb has in it as well
and the one that was disables ( this one) shows Actions : (View-Readers) (Set Date)
and the vb one doesn't

any info on this would be greatly appreciated

[Paul M]

Those functions are not in the 4.2 core, only the basic functionality was added.

There will be a modified WRT product on vb.org, to add most (if not all) of that once 4.2 has been released (and I have the time to release the new mod version).

[Hippy]

Thanks Paul, I wasn't going to update lol.. if it ment I would lose all the function of your mods

[Chadi]

I installed this after upgrading to 4.2.0 (first, uninstalled all previous plugins).

So, I had to import the whoread table from my old database via phpmyadmin (I emptied the new db whoread tables frist). It imported 23MB. However, no difference shows on all threads, especially sticky threads that have thousands of views.

What did I miss to update the stats?

Thanks

[Chadi]

Hey Paul, would appreciate your help my friend :)

[Paul M]

The old modification whoread table is not used by the core WRT code in 4.2, it uses its own table(s).

[fishmaster]

Not seeing it in 4.2, and gave turned it on at: Settings > Options > Thread Display Options

[Hippy]

Not seeing it in 4.2, and gave turned it on at: Settings > Options > Thread Display Options

it's not part of vb core
youll find it here in vb4.2
Help
Thread Display Options (showthread)

[Hippy]

The old modification whoread table is not used by the core WRT code in 4.2, it uses its own table(s).

paul I added the new mod to add the (View-Readers) (Set Date)
this is when I noticed the whoread data was not carried over the new table..
what is the new table called so I can move this info..

or is there a different way to do this

I have updated other sites and I don't remember this not carring over

thanks
Hippy

[Hippy]

I found it I guess
contentread but everything is different

is all the old data un-useable?

please let me know..

[Makaveli007]

So if I am reading this correctly @Paul M, once I update my site to 4.2, I will lose the features you list in black, until you release an update? This means all usergroups will be able to see the list of who read? Currently I only let my staff see it, and we use it along with your member tracking mod for tracking purposes and to see where people go in the site. It's too bad some of the best features of your mods are missing in the core move to vb4.2

[Paul M]

So if I am reading this correctly ......This means all usergroups will be able to see the list of who read?
Nope, I think you have misread something.

[Makaveli007]

Nope, I think you have misread something.

after installing i figured it out. the permissions are in the usergroup manager. when i read your list, i took it to mean the ones in brown were built into vb 4.2, and the ones you list in black would be unavailable until you released an update for 4.2.

some of the things in black are in 4.2 core, but the one that is most important to what staff does on my site, specifically number 9 (9. Clicking on a user will display a page of their thread viewing history, most recent first.) does not seem to be available in 4.2.

to get around it, i disabled the vb 4.2 built in one and re-enabled your 4111 version. it seems to be working just fine

[Paul M]

some of the things in black are in 4.2 core, but the one that is most important to what staff does on my site, specifically number 9 (9. Clicking on a user will display a page of their thread viewing history, most recent first.) does not seem to be available in 4.2.

to get around it, i disabled the vb 4.2 built in one and re-enabled your 4111 version. it seems to be working just fine
They are available for 4.2.

You should remove this completely and use the 4.2 Thread Reader Enhancements mod.

[Hippy]

@Paul M
So all the data from this mod is no longer usable.. in vb4.2 (it wasn't carried over)
when it uninstalls the table is still in the DB with all the info in it.
was the table spared for a further merge? to move it over /integrate into the core version?
or can / should delete it?
thanks

[Paul M]

The table was spared in the upgrade so you could, if you wanted, transfer the data over.

However, you would need to write your own code or queries to do this.

Note: If you uninstall the old version via the Product Manager, it will remove the old table.

[Makaveli007]

They are available for 4.2.

You should remove this completely and use the 4.2 Thread Reader Enhancements mod.

ah yes ok, see what happens when you dont read everything... me = :fail:

question though, is there any reason why i shouldnt keep using 4111? it seems to be working and i want to keep my previous data. I use it for tracking and reports, and I am unfortunately not good enough to write my own codes and queries to do it

[Paul M]

There might be a variable name clash between them on some of the settings, and duplication of the functionality, other than that I think it would probably work ok.

[Hippy]

The table was spared in the upgrade so you could, if you wanted, transfer the data over.

However, you would need to write your own code or queries to do this.

Note: If you uninstall the old version via the Product Manager, it will remove the old table.

any chance on a code /queries from you :D I can use ?

thanks for the info Paul M

[Akyeame Kwame]

Hello, any idea what may be causing this error? Conflict with another mod? Rewrite rules?

As I look at it, it comes up when someone tries to click Next Thread when the thread is the last one and there is no next one. I would think that it shouldn't show "Next Thread" but the link does show and when one clicks it with this mod, it returns this error.

Database error in vBulletin 4.1.11:

Invalid SQL:

SELECT user.userid, user.options, user.username,
user.usergroupid, user.displaygroupid, whoread.dateline, whoread.ipaddress
FROM whoread as whoread
LEFT JOIN user as user USING (userid)
WHERE whoread.threadid = 47611
AND whoread.dateline > ORDER BY username;

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ORDER BY username' at line 6
Error Number : 1064
Request Date : Thursday, June 21st 2012 @ 12:43:47 PM
Error Date : Thursday, June 21st 2012 @ 12:43:48 PM
Script : http://www.**********.com/forums/**********
Referrer : http://www.**********.com/forums/**********
Classname : vB_Database
MySQL Version : 5.1.61

[Paul M]

vBulletin should just direct you to a message that says ;

There are no threads newer than the previous one. Click the back button in your browser to return to it.

So it sounds like something is not standard on your forum.

[Akyeame Kwame]

vBulletin should just direct you to a message that says ;



So it sounds like something is not standard on your forum.

I installed the latest update to the mod and no more issue. I get the
There are no threads newer than the previous one. Click the back button in your browser to return to it.
message now and no database error. I appreciate it.

[Eq4bits]

Using vB4.2PL2 now so uninstalled
(however I have installed the Thread Reader Enhancements mod (https://vborg.vbsupport.ru/showthread.php?t=283492) referred to in mod description)

[slozz]

I am looking for the hook or whatever that makes the who has read this thread to display where is it at in the style manager ? what is the line of code and ill search for it in style manager thanks. I am regarding to the built in 4.2 version ? Basically I have a skin that doesnt display at he bottom of the thread who has read the post so I am just wanting to modify this one skin to do that. I just need the hook and Ill edit the php or whatever I need to edit if you guys give me a tad bit of direction on this one .

THanks,

[Abdelazim]

Thanks Paul I'd been looking allover for it.

[acast]

That would most likely be tapatalk not running the appropriate hooks when viewing a thread.Any solution to that??

[Paul M]

That would require tapatalk to fix their product.

[RRCamellini]

I'm using vb 4.2.2 and giving mismatch, any solution?

[Paul M]

You will need to be a bit more specific about what your issue is.

[RRCamellini]

The following dependencies were not met:

This product is not compatible with version 4.2.2 of vBulletin. (From 4.1.11 Compatible / Incompatible with 1.4.99 and higher)

and not compatible with vb 4.2.2 Pl1, some solution?

[Paul M]

Read the blue text in the first post. :)

[Asmod]

Should i use this on vb 4.2.2 ?

Because i have the feature Who read thread on, but is only showing how many users have readed but not who readed with the usernames expanded.

https://vborg.vbsupport.ru/external/2014/06/34.png

[Paul M]

No, you dont need this for 4.2.2

[Asmod]

No, you dont need this for 4.2.2

But how i make it work ? see my post above please :)

[Paul M]

Sorry, but without full access to your site its not possible to know what your issue is.

[Asmod]

Sorry, but without full access to your site its not possible to know what your issue is.

Details sent on PM. Many thanks!

[Paul M]

Its actually working for you.

The issue is that you have "Who Read - Collapse on Load" set to yes, so the display is collapsed when you load the thread, and because you have "Show Users Browsing Threads" also turned on, the arrow to uncollapse the display is misplaced (as per bug VBIV-15424 (http://tracker.vbulletin.com/browse/VBIV-15424)).

[Asmod]

Its actually working for you.

The issue is that you have "Who Read - Collapse on Load" set to yes, so the display is collapsed when you load the thread, and because you have "Show Users Browsing Threads" also turned on, the arrow to uncollapse the display is misplaced (as per bug VBIV-15424 (http://tracker.vbulletin.com/browse/VBIV-15424)).

Ohh, didnt know about the bug, but what about empty posts - i have normal users that post and the post in empty, i have to edit it to read but soon as i save it still blank.

Are normal members affected by any mod....dunno!?

[Paul M]

Ohh, didnt know about the bug, but what about empty posts - i have normal users that post and the post in empty, i have to edit it to read but soon as i save it still blank.

Pretty sure thats not related to this mod, so this is not really the best place to ask.

[coolbreeze86]

Hi my version is vb4.2.2.

List of Threads Viewed by : Member name &
Who Viewed This Thread : Thread name.

The list is showing but the date is decresing day by day. I need all entries be there without decreasing date. how can i set it.

[ozzy47]

This is from the first post in the mod thread:

This modification is not required for vBulletin 4.2 onwards

Part of this functionality has been added to the vB4.2 Core.
The functionality not added is available as a new modification here (https://vborg.vbsupport.ru/showthread.php?t=283492).

[Stratis]

Is there a problem to keep this version?? to vb4.2.0 pl4

I know that its not needed for 4.2.x, and that this mod Thread Reader Enhancements makes better job but the problem is if not keep this version all entries will be lost if choose other way

Thanks in advanced for any answers

[tareqbd]

Hi Paul, may I request a feature like logging multiple visits in the same thread by same user?

[e24h]

installed..works well

[Paul M]

Hi Paul, may I request a feature like logging multiple visits in the same thread by same user?

Sorry, I have no plans to make any updates to this.