vBTwitter

[puertoblack2003]

Hm. I don't know why, but that still happens... Try reinstall if possible?



Yes, just modify the link.

yep did that and still same error

Warning: mcrypt_decrypt() [function.mcrypt-decrypt]: The IV parameter must be as long as the blocksize in [path]\profile.php(1873) : eval()'d code on line 4

[Racecar]

when I click on the to twit page it gives me an error that the page is not available

[Mahar]

I've installed this and put everything where it should have gone and none of the links are popping up... this .ds store file that's with the product, where does that go? Forum root? Because If so...it still isn't working..

[King Kovifor]

yep did that and still same error

Hm... Not sure.

when I click on the to twit page it gives me an error that the page is not available

Twit page? as in tweet.php or tp.php and tt.php?

I've installed this and put everything where it should have gone and none of the links are popping up... this .ds store file that's with the product, where does that go? Forum root? Because If so...it still isn't working..

The .ds file is a mac database file that saves the location of files (as in arrangement) and isn't needed it. Did you add your details?

[BusterHymens]

Where does the .svn folder go? In the forum directory or in the root? When you click on any folder that same .svn folder is in almost each one. Why is that?

[puertoblack2003]

Hm... Not sure.



hmm not sure either! can't use it then. Love your support :eek:

[CnSGD]

hmm not sure either! can't use it then. Love your support :eek:

I did all that it shows and I still don't have mine in the options either. Hummmm

[King Kovifor]

hmm not sure either! can't use it then. Love your support :eek:

My support is in limited time. I haven't had the time to sit down and actually figure out what could be causng this. I may modify make a surprise feature update.

[Mahar]

Edit my details as in?

[puertoblack2003]

My support is in limited time. I haven't had the time to sit down and actually figure out what could be causng this. I may modify make a surprise feature update.


i was researching and tinkering with the codes. I change mcrypt_encrypt(MCRYPT_3DES, COOKIE_SALT, $twitter['twitter_password'], MCRYPT_MODE_CBC
in bold and added RIJNDAEL and mode ECB and the problem went away.But i know you can use it because it's weak.Just an idea maybe in the future to look at.:)

[RoyalMac]

I installed it, got the link for Tweet this thread, but no link appears for tweet this post.
Anybody got any suggestions?

Edit: Never mind, I got it. I had to do the edits as shown above. :o
Works great!

[King Kovifor]

i was researching and tinkering with the codes. I change in bold and added RIJNDAEL and mode ECB and the problem went away.But i know you can use it because it's weak.Just an idea maybe in the future to look at.:)

Glad you figured it out. But, I'm sorry that my support wasn't useful. I might do a quick feature update.

[King Kovifor]

OAuth released. :)

[puertoblack2003]

Glad you figured it out. But, I'm sorry that my support wasn't useful. I might do a quick feature update.

no problem i understand..I didn't incorporated yet.Because i didn't know if it's 100% safe or not,I'll just wait till the new feature is out.:)

[King Kovifor]

And you post this after the update. Reinstall vBTwitter. Mcrypt isn't used anymore and storage of passwords and usernames not required any more. Not even an option.

[puertoblack2003]

And you post this after the update. Reinstall vBTwitter. Mcrypt isn't used anymore and storage of passwords and usernames not required any more. Not even an option.

yep,yep just noticed..working flawless..:D Thanks for you taking time to upgrade this...:up:

[King Kovifor]

It was quite easy. It was back porting from the next version. And modifying the process of authentication.

[KevinL]

OAuth released. :)

Thank you for taking the time to do this :)

[mykkal]

OAuth released. :)

https://vborg.vbsupport.ru/external/2009/07/15.gif

[King Kovifor]

King Leonitis approves of my royal decisions. Lol.

[mykkal]

When I click on "tweet this post" i get this error:

"Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake."

[mykkal]

When I click on "tweet this post" i get this error:

"Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake."

Got past this problem but when i click 'Tweet this thread' the post never appears. I saw that a few others had this problem.

Everything is setup correctly as I can see. Will check the installation procedure again but its all done.

I just attempt to tweet and nothing happens

Also... I noticed a feature in your screenshots that I don't see on my board after installation. "tweet this post' is only availble from the thread tools drop down. There's no link to it next to the permalink like in your example. Is that a defect?

Look here:
https://vborg.vbsupport.ru/attachment.php?attachmentid=95497&d=1235596093

[squishi]

So what's new in v1.0.4?
Maybe you could add the features to the first post?

[Cybertims]

All works well except when it posts to Twitter it doesn't post a link as such....just some text. There is no more tinyurl link in the twitter update.

Cheers

[barcena]

Sorry if my question is already posted but I can't posibly read 35 pages.

1. Will this work with vbseo or it is irrelevant? (Don't have it yet but planning to..)

2. I did everything as the instructions says, or so I think, and

I'm not seeing the twitter icon
I'm getting this error when click on the Twitter feature. (See attachment)

Any help I will appreciate very much.

[bojomojo]

This didnt make a "check this out" tweet.. it made a tweet saying: "I have successfully set up my account to work with vBTwitter at one of the sites I visit! (This message means it was successful!)"

[mykkal]

Hey I got first dibs on King this morning lol!

I still can't get it to tweet.

[mykkal]

This is amazing... Actually vbtwitter is working for my other users but not for me!
Whenever I try to tweet a thread nothing happens. How do I fix this?

also, it still says "check this out" for the users that twitter does work for? Thats only reason i upgraded! "Check this out" is mostly useless. There's been an 8 month discussion on that?

[mykkal]

King, please make me a priority this morning.

I cleared the OAUTH fields to in an attempt to resetup my account to twtter. It allowed me to authenticate to twitter but now I cannot log into my site! whenever I use my password it tells me it cannot authenticate me. why is this?

Its definitely related to the vbtwitter app. only the users that I deleted the tokens for are having this problem. All the other users are not.

I'm absolutely sure i'm logging in correctly. please assist this is urgent becuase i have jobs we've been paid to post and cannot.

[MichaelaS]

Hey King, I am having a problem (of course) :)

After I installed and configured vB Twitter (which was smooth and easy..THANKS!), it seems that I am having a problem making any post on twitter at all..in fact when I hit "Tweet this Thread!" all that seems to happen is a page refresh - no twitter.

Any ideas?

Thanks man, you rock!

[mykkal]

Hey King, I am having a problem (of course) :)

After I installed and configured vB Twitter (which was smooth and easy..THANKS!), it seems that I am having a problem making any post on twitter at all..in fact when I hit "Tweet this Thread!" all that seems to happen is a page refresh - no twitter.

Any ideas?

Thanks man, you rock!

that means your application is set to read only. Even if you fix it you will still have problems. create a new application set it up as read & write access and then use it. if you use the application on the wrong settings in the beginning that user is screwed. you can change it to the correct settings and other users setting up the application will work fine but the user that authorizes the app under read only is screwed

[MichaelaS]

Thanks! that does make sense. You rock!

I wonder if there is a way to "reset" a user's settings so that the person is no longer screwed..

[fmckinnon]

Hooray - glad I waited - will do a clean install this evening and report!

[mykkal]

i uninstalled. I'll reinstall when the "check this out!" portion is changed to custom titles and links.

I've heard Oauth is a improvement but for myself and my users... there's nothing different here. I need custom thread titles. We all do :)

Great work King. Let me know when you take that big step we've all been wanting :)

[barcena]

Sorry if my question is already posted but I can't posibly read 35 pages.

1. Will this work with vbseo or it is irrelevant? (Don't have it yet but planning to..)

2. I did everything as the instructions says, or so I think, and

I'm not seeing the twitter icon
I'm getting this error when click on the Twitter feature. (See attachment)

Any help I will appreciate very much.


Please can somebody answer me?

Thanks :)

[King Kovifor]

All works well except when it posts to Twitter it doesn't post a link as such....just some text. There is no more tinyurl link in the twitter update.

Cheers

There's no link? It auto posts a test tweeting saying a successful authorization.

Sorry if my question is already posted but I can't posibly read 35 pages.

1. Will this work with vbseo or it is irrelevant? (Don't have it yet but planning to..)

2. I did everything as the instructions says, or so I think, and

I'm not seeing the twitter icon
I'm getting this error when click on the Twitter feature. (See attachment)

Any help I will appreciate very much.

I have no vBSEO support, it redirects to the direct link. I don't have vBSEO. No twitter icon? In the thread drop down.

King, please make me a priority this morning.

I cleared the OAUTH fields to in an attempt to resetup my account to twtter. It allowed me to authenticate to twitter but now I cannot log into my site! whenever I use my password it tells me it cannot authenticate me. why is this?

Its definitely related to the vbtwitter app. only the users that I deleted the tokens for are having this problem. All the other users are not.

I'm absolutely sure i'm logging in correctly. please assist this is urgent becuase i have jobs we've been paid to post and cannot.

If you uninstall and reinstall, it will remove OAuth tokens. I am not sure if deleting tokens such as that will screw everyone over...

Hey King, I am having a problem (of course) :)

After I installed and configured vB Twitter (which was smooth and easy..THANKS!), it seems that I am having a problem making any post on twitter at all..in fact when I hit "Tweet this Thread!" all that seems to happen is a page refresh - no twitter.

Any ideas?

Thanks man, you rock!

Did you set you application as Read & Write?

i uninstalled. I'll reinstall when the "check this out!" portion is changed to custom titles and links.

I've heard Oauth is a improvement but for myself and my users... there's nothing different here. I need custom thread titles. We all do :)

Great work King. Let me know when you take that big step we've all been wanting :)

This update only has check this out. That was intentional. All major feature updates, such as custom titles and links are found in v1.1. That has been the plan all along. I'm just tired of dealing with mcrypt so I made this quick update. I'm sorry that it isn't "up to your par," but it's all your going to get right now. Until v1.1 is ready, you'll have it. Give it the time it needs...

[King Kovifor]

So what's new in v1.0.4?
Maybe you could add the features to the first post?

OAuth integration. The second post in this thread (Comment #1) is the change log.

Got past this problem but when i click 'Tweet this thread' the post never appears. I saw that a few others had this problem.

Everything is setup correctly as I can see. Will check the installation procedure again but its all done.

I just attempt to tweet and nothing happens

Also... I noticed a feature in your screenshots that I don't see on my board after installation. "tweet this post' is only availble from the thread tools drop down. There's no link to it next to the permalink like in your example. Is that a defect?

Look here:
https://vborg.vbsupport.ru/attachment.php?attachmentid=95497&d=1235596093

If you are talking about the "Twitter" Drop down, that's only in v1.1. But what feature don't you see? And it should still appear there. It's fine.

All works well except when it posts to Twitter it doesn't post a link as such....just some text. There is no more tinyurl link in the twitter update.

Cheers

No link? Are you talking about the successful tweet?

Sorry if my question is already posted but I can't posibly read 35 pages.

1. Will this work with vbseo or it is irrelevant? (Don't have it yet but planning to..)

2. I did everything as the instructions says, or so I think, and

I'm not seeing the twitter icon
I'm getting this error when click on the Twitter feature. (See attachment)

Any help I will appreciate very much.

You didn't upload all files, and still confused on the first one.

[barcena]

OAuth integration. The second post in this thread (Comment #1) is the change log.



If you are talking about the "Twitter" Drop down, that's only in v1.1. But what feature don't you see? And it should still appear there. It's fine.



No link? Are you talking about the successful tweet?


You didn't upload all files, and still confused on the first one.

Hi, this is what I have, please see the attachted pics, I don't know technicalities but I guess I did it right, could it be my server or I'm missing something? :)

I think I did it like on Upgrading to v1.0.4 instead of the simple Installation, did I took the hard way?

[King Kovifor]

Hi, this is what I have, please see the attachted pics, I don't know technicalities but I guess I did it right, could it be my server or I'm missing something? :)

I think I did it like on Upgrading to v1.0.4 instead of the simple Installation, did I took the hard way?

Did you just install the .xml and not upload all the files found in /upload/? As that would cause all your errors. Because it looks like you just installed the .xml.

[barcena]

Hum... lenme double check.

Know what I will uninstall and install the product again. Thanks King, I will let you know. :)

Update:

King bear with me here please (or any other member willing to help me out) as I'm not expert or anything. The file named Upload.. when I try to upload anything from there it will give me an error, it only allows me to upload (trought products and plugins) the XML file. What should I do step by step please?.

Meaning, there's a file named vBTwitter v1.0.4==>Upload file/product XML==>Images/Includes/4 other files==>etcetc

When you say Upload files in the /upload/ folder of the .zip into the directories as is.
What are the directories? Sorry about my ignorance but I want to learn and do it myself.

Thanks :)

[King Kovifor]

Hum... lenme double check.

Know what I will uninstall and install the product again. Thanks King, I will let you know. :)

Update:

King bear with me here please (or any other member willing to help me out) as I'm not expert or anything. The file named Upload.. when I try to upload anything from there it will give me an error, it only allows me to upload (trought products and plugins) the XML file. What should I do step by step please?.

Meaning, there's a file named vBTwitter v1.0.4==>Upload file/product XML==>Images/Includes/4 other files==>etcetc

When you say What are the directories? Sorry about my ignorance but I want to learn and do it myself.

Thanks :)

The upload folder is set up as a root folder. They need to be uploaded looking in the structure. So if you go into your forum root on your site through ftp, the 4 files go there. Then you go into /includes/ and upload those, etc.

[fmckinnon]

OK - installed, and working perfectly.

Now, please tell us where we can make modifications:
1 - how to change the "Tweet This Post" wording, and/or add a "Tweet This" graphic.
2 - how to change the location of #1 above.
3 - how to change the default "Check this out" text.

Thanks a million!

[King Kovifor]

OK - installed, and working perfectly.

Now, please tell us where we can make modifications:
1 - how to change the "Tweet This Post" wording, and/or add a "Tweet This" graphic.
2 - how to change the location of #1 above.
3 - how to change the default "Check this out" text.

Thanks a million!

1 & 3 = phrases. Search for phrase varnames starting with twitter_. 2 is a bit harder... It'll be much easier in the next version (right now, it searches the code). You could put the code in manually.

[scottjonesqpr]

Wonder if anyone can help.

I have this installed on my forum but get this

Fatal error: Call to undefined function curl_init() in /home/default/wearetherangersboys.com/user/htdocs/forum/includes/class_twitterOAuth.php on line 115

[scottjonesqpr]

sorry, thats what the page shows when i hit "tweet this post"

[fmckinnon]

King - OK, got #1 and #3 done - check it out - I'm using a graphic now, instead of the text:
http://www.theworshipcommunity.com/forums/welcome-announcements/3560-twc-mission-one-million.html.

On #3 - I'm not afraid of tweeking the code to add manually, just now sure where to pull the actual code from, and where to insert it ...

A couple of new questions:
1 - now that I'm authorized, when I tweet a post or thread, I get no confirmation or any indication that it happened. It *DOES* happen, but as soon as I click on "Tweet This ...", the page reloads and there is no confirmation. As a result, I fear that our users will think it's broken, and will keep clicking the "Tweet This" over and over. Where am I supposed to be seeing a confirmation, or is this something that has to be enabled?

2 - because of the way the single post looks - I'd rather ONLY give the option to "tweet this thread" ... how can I change the code so that in the post headers, it's the "tweet this thread" option INSTEAD of the "tweet this post" option?

3 - when I did the initial oauth authorization, I was logged into the wrong twitter account. How can I deauthorize my twitter account with my userID and start over re-authorizing with my other twitter ID?

Thanks in advance!
FRED

[scottjonesqpr]

I'd really like some help on this - trying to figure it out on my own but im struggling - i love this feature and it DID work before the upgrade :(

sorry for being a numpty

[King Kovifor]

Wonder if anyone can help.

I have this installed on my forum but get this

Fatal error: Call to undefined function curl_init() in /home/default/wearetherangersboys.com/user/htdocs/forum/includes/class_twitterOAuth.php on line 115

You don't have cURL installed on your server. COntact your host.

King - OK, got #1 and #3 done - check it out - I'm using a graphic now, instead of the text:
http://www.theworshipcommunity.com/forums/welcome-announcements/3560-twc-mission-one-million.html.

On #3 - I'm not afraid of tweeking the code to add manually, just now sure where to pull the actual code from, and where to insert it ...

A couple of new questions:
1 - now that I'm authorized, when I tweet a post or thread, I get no confirmation or any indication that it happened. It *DOES* happen, but as soon as I click on "Tweet This ...", the page reloads and there is no confirmation. As a result, I fear that our users will think it's broken, and will keep clicking the "Tweet This" over and over. Where am I supposed to be seeing a confirmation, or is this something that has to be enabled?

2 - because of the way the single post looks - I'd rather ONLY give the option to "tweet this thread" ... how can I change the code so that in the post headers, it's the "tweet this thread" option INSTEAD of the "tweet this post" option?

3 - when I did the initial oauth authorization, I was logged into the wrong twitter account. How can I deauthorize my twitter account with my userID and start over re-authorizing with my other twitter ID?

Thanks in advance!
FRED

Update on my post above - here's what I did ... I went to twitter.com and logged in as the user I do NOT want the tweets to post to - went to Settings > Connections, and revoked my VBTwitter app.

So now, when logged in as that user, it doesn't post to Twitter because of this, but the userID in vbulletin doesn't "know" it needs to be re-auth with a different account - when I attempt to use the "tweet this" links, I'm wanting to get a new oauth process, but nothing happens - how can I reset that userID in vbulletin to start over w/ oauth?

Well to answer them both. Tweet this post: do you want it as part of the thread? There's a switch for that. For the resetting, I believe you can reauthorize through the settings using the correct user information. Just go to twitter_auth.php again. (Not tested). And nice image. ;) And there's no confirmation in v1.0. It was a dumb design. And in v1.1 I plan on trying to add a little check mark through AJAX.

[fmckinnon]

King,
Thanks ... I just deleted my followup ... I revoked permissions in Settings > Connections on the wrong twitter account, and then manually went into phpmyadmin and deleted the oauth info from my user profile in the mySQL database - maybe that wasn't the easy way, but it worked. Now, I went to tweet it and got the oauth, which i did on my correct account.

Is there a way to make it NOT do the "I have successfully setup ..." tweet on the first post? Users won't understand that they have to do their first "tweet this" twice - once for the oauth, and again for the actual post.

[scottjonesqpr]

i have curl installed appara, i checked and they said 101% i do?

if they're lieing to me (wouldnt surprise me) is there an idiots guide of how to do that?

cheers

[doa24uk]

Can this mod allow auto-tweeting when a topic is created so that it tweets immediately to the users account (if they've set up their account in the options page??)

DoA

[ZiG]

what about a reverse vbtwitter, where your members can link their twitter account to the website and everytime they tweet it is fed to the vb. so user tweets can show up on a CMPS or CMS?

[King Kovifor]

King,
Thanks ... I just deleted my followup ... I revoked permissions in Settings > Connections on the wrong twitter account, and then manually went into phpmyadmin and deleted the oauth info from my user profile in the mySQL database - maybe that wasn't the easy way, but it worked. Now, I went to tweet it and got the oauth, which i did on my correct account.

Is there a way to make it NOT do the "I have successfully setup ..." tweet on the first post? Users won't understand that they have to do their first "tweet this" twice - once for the oauth, and again for the actual post.

Currently, the way that OAuth works, is that it doesn't send back any information. I can't say "tid" and have it returned. So, if they set it up first, it works. If not, they are screwed. Sorry to say it.

Can this mod allow auto-tweeting when a topic is created so that it tweets immediately to the users account (if they've set up their account in the options page??)

DoA

Not yet at least.

what about a reverse vbtwitter, where your members can link their twitter account to the website and everytime they tweet it is fed to the vb. so user tweets can show up on a CMPS or CMS?

That would be like an RSS feed. But no.

[ZiG]

That would be like an RSS feed. But no.

yea sorry, i realize this mod doesn't support something like that. yea exactly, an rss feed but defined by the users of your vbulletin who enter their twitter info. so members of your community can get t know each other better by browsing through their tweets on a CMPS page or forum index. just a suggestion.

[seaweed]

Installed and think it is great, however i would like to know how to prevent post from priviae sections from being twitted? I just finished trying to read the vbfacebook thread and my head is baked, imsorry if this has already been addressed. please link or suggest a solution. Thanks so much

Seaweed

[Biker_GA]

If Guests can't see the forum, it shouldn't appear in Twitter, even if someone attempts to post it. However, you can also set Twitter permissions via Forum Permissions. You'll have to do it for each forum you wish to prevent from being "Tweeted".

[King Kovifor]

Installed and think it is great, however i would like to know how to prevent post from priviae sections from being twitted? I just finished trying to read the vbfacebook thread and my head is baked, imsorry if this has already been addressed. please link or suggest a solution. Thanks so much

Seaweed

No matter how many times you attempt to access something a private forum, if you don't have access, it won't show. All vBTwitter does is provide a way to post to Twitter and handle a relink back. vBulletin does the rest (showing the post, permissions, etc.).

If Guests can't see the forum, it shouldn't appear in Twitter, even if someone attempts to post it. However, you can also set Twitter permissions via Forum Permissions. You'll have to do it for each forum you wish to prevent from being "Tweeted".

Not a bad idea for v1.1 or v2.0 or later... But you have the wrong modification. ;)

[Biker_GA]

DOH! That's the other plugin I installed at the same time. **facepalm**

[mykkal]

It still says "CHECK THIS OUT!" when I tweet. I thought the thread title was a promised feature in the next release? King, what did I just pay some college kid to upgrade me too? I told you i'd pay for the thread title. Even though I know you did some work on this behind the scenes to make it better somehow... Its the same as before to me.

Is there going to be a quick update that actually tweets the thread titles? I didn't lose much but I could have used it to dev the thread titles into your old plugin at least. kinda feels like wasted time.

sorry but thats how i felt.

[mykkal]

oh wait i see. you said 1.1. when does 1.1 have an eta? Sorry i asked you out of order. i really thought this was it.

[masterweb]

I installed it without problems but each time i try to twitt a thread i'm redirected to a page with the following:


Woah there!

This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again ? it was probably an honest mistake.


Any help pls?

[gniuzvb]

Thanks for this great mod. I quickly glanced thru the past 38 pages, but can't seem to find this. Sorry if is repost.

Is there any settings that once a user submitted tweeter authorization, all his subsequent posts and threads are send to tweeter? That will be better instead of waiting for user action to tweet.

Something similar with facebook connect user, where all the threads and replies are posted to facebook profile.

Thanks

[Verionia]

How can I get the number of users who tweeted the thread or the tweet this button with the stats?

[HiPhone]

ive a problem. i have installed teh tool ive made the key`s on twitter. first time i`ve clickt the twitter button the alow / deny page from twitter appears. after that the tool did nothing. there are no posts on twitter now when i click the twitter button.

[King Kovifor]

oh wait i see. you said 1.1. when does 1.1 have an eta? Sorry i asked you out of order. i really thought this was it.

No, 1.1 doesn't have an ETA.

I installed it without problems but each time i try to twitt a thread i'm redirected to a page with the following:





Any help pls?

It seems like you are revoking permissions on Twiter's end, or it is attempting to redirect you. reinstall?

Thanks for this great mod. I quickly glanced thru the past 38 pages, but can't seem to find this. Sorry if is repost.

Is there any settings that once a user submitted tweeter authorization, all his subsequent posts and threads are send to tweeter? That will be better instead of waiting for user action to tweet.

Something similar with facebook connect user, where all the threads and replies are posted to facebook profile.

Thanks

No, there is no auto-tweet.

How can I get the number of users who tweeted the thread or the tweet this button with the stats?

There is currently no way.

ive a problem. i have installed teh tool ive made the key`s on twitter. first time i`ve clickt the twitter button the alow / deny page from twitter appears. after that the tool did nothing. there are no posts on twitter now when i click the twitter button.

Are you sure you set it up correctly?

[anadd]

I have reinstalled and reuploaded everything. I still get this message as well:
Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake.

[King Kovifor]

I have reinstalled and reuploaded everything. I still get this message as well:
Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again ? it was probably an honest mistake.

hm... that's rather odd. And something I have never come across before...

[Biker_GA]

I got that when I had "registered" twice on Twitter. Removed the modification and reinstalled, all was good.

[sensimilla]

hm... that's rather odd. And something I have never come across before...

Ive got same error, Ill try to reinstall again.

[King Kovifor]

I got that when I had "registered" twice on Twitter. Removed the modification and reinstalled, all was good.

hm?

[rjerina]

I tried searching but didn't find anything, but instead of storing password or prompting for a password, how do sites like Twitpic etc authenticate? They somehow pick up your authentication to twitter and they just work, I assume with something through the API.

Forgive me if this was posted already. I am interested in this but don't want to store any passwords unencrypted if possible and very little use integration.

[johnbmtl]

When I click on the link in th euser options "Setup integration by clicking here."

I get the following from the twitter site:

Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake.

Did I miss something in the installation?

------------------
Update: Yes I did miss something in the installation.
The instructions to register an OAuth Application which appear under the Upgrading instructions also apply to new installations.

Everything works fine now.

[ClipBucket]

To post the title for threads to Twitter, edit tweet.php
Find the section that starts with:

if($_GET['do'] == 'thread')
{


Find:

$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $vbphrase['twitter_checkout'] . $vbulletin->options['bburl'] . '/tt.php?i=' . $vbulletin->GPC['id']), 'POST');


Change to:


$thread = $db->query_first("SELECT title FROM " . TABLE_PREFIX . "thread WHERE threadid = " . $vbulletin->GPC['id']);
$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $thread['title'] .' - '. $vbulletin->options['bburl'] . '/tt.php?i=' . $vbulletin->GPC['id']), 'POST');


This only works when Twittering a thread.
I have not looked into sending post titles yet, though it should also be trivial.

[ClipBucket]

This is not tested.

To post the title for posts to Twitter, edit tweet.php
Find the section that starts with:

if($_GET['do'] == 'post')
{


Find:

$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $thread['title'] .' - '. $vbulletin->options['bburl'] . '/tp.php?i=' . $vbulletin->GPC['id'] . '&c=' . $vbulletin->GPC['c']), 'POST');


Change to:

$post = $db->query_first("SELECT title FROM " . TABLE_PREFIX . "post WHERE postid = " . $vbulletin->GPC['id']);
$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $post['title'] .' - '. $vbulletin->options['bburl'] . '/tp.php?i=' . $vbulletin->GPC['id'] . '&c=' . $vbulletin->GPC['c']), 'POST');

[King Kovifor]

I tried searching but didn't find anything, but instead of storing password or prompting for a password, how do sites like Twitpic etc authenticate? They somehow pick up your authentication to twitter and they just work, I assume with something through the API.

Forgive me if this was posted already. I am interested in this but don't want to store any passwords unencrypted if possible and very little use integration.

Well, this doesn't prompt for a password. And twit pic, does. If you go to their site, they prompt for a username / password.

When I click on the link in th euser options "Setup integration by clicking here."

I get the following from the twitter site:

Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again ? it was probably an honest mistake.

Did I miss something in the installation?

------------------
Update: Yes I did miss something in the installation.
The instructions to register an OAuth Application which appear under the Upgrading instructions also apply to new installations.

Everything works fine now.

Guess I missed something their. *wonders why I screwed that up*.

To post the title for threads to Twitter, edit tweet.php
Find the section that starts with:

if($_GET['do'] == 'thread')
{


Find:

$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $vbphrase['twitter_checkout'] . $vbulletin->options['bburl'] . '/tt.php?i=' . $vbulletin->GPC['id']), 'POST');


Change to:


$thread = $db->query_first("SELECT title FROM " . TABLE_PREFIX . "thread WHERE threadid = " . $vbulletin->GPC['id']);
$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $thread['title'] .' - '. $vbulletin->options['bburl'] . '/tt.php?i=' . $vbulletin->GPC['id']), 'POST');


This only works when Twittering a thread.
I have not looked into sending post titles yet, though it should also be trivial.

This is not tested.

To post the title for posts to Twitter, edit tweet.php
Find the section that starts with:

if($_GET['do'] == 'post')
{


Find:

$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $thread['title'] .' - '. $vbulletin->options['bburl'] . '/tp.php?i=' . $vbulletin->GPC['id'] . '&c=' . $vbulletin->GPC['c']), 'POST');


Change to:

$post = $db->query_first("SELECT title FROM " . TABLE_PREFIX . "post WHERE postid = " . $vbulletin->GPC['id']);
$twitter->OAuthRequest('https://twitter.com/statuses/update.xml', array('status' => $post['title'] .' - '. $vbulletin->options['bburl'] . '/tp.php?i=' . $vbulletin->GPC['id'] . '&c=' . $vbulletin->GPC['c']), 'POST');

I thank you for writing this, but it has the problems within itself. It doesn't do character checking. Which is what I have done extensively for the next version.

[ClipBucket]

I thank you for writing this....
Thanks & thanks for the original hack.


...but it has the problems within itself. It doesn't do character checking. Which is what I have done extensively for the next version.
It should be trivial to escape the characters.
I just threw this together quick to see if it would work.

[King Kovifor]

Yes, I have several shortening steps. It first checks it using a full URL, then shortens the URL, then the title. It should work rather well. I am stuck with v1.1 because I came to depend on AJAX a lot and my AJAX developer left. :(

[ClipBucket]

Depending on AJAX for what exactly?
By character checking, I'm assuming you meant for checking the title length?

I recommend you put the code on a service like OpenSVN (https://opensvn.csie.org/), Google Code (http://code.google.com/projecthosting/) or GitHub (http://github.com).
PM me credentials for commit access & I will assist w/ coding.

[ClipBucket]

OK, well I just setup the project on Google Code (http://code.google.com/p/vbtwitter/).
Join Google Code & send me your username, so that I can give you ownership of the project.

[King Kovifor]

Depending on AJAX for what exactly?
By character checking, I'm assuming you meant for checking the title length?

I recommend you put the code on a service like OpenSVN (https://opensvn.csie.org/), Google Code (http://code.google.com/projecthosting/) or GitHub (http://github.com).
PM me credentials for commit access & I will assist w/ coding.

v1.1 is drastically different, and includes AJAX throughout the new features.

OK, well I just setup the project on Google Code (http://code.google.com/p/vbtwitter/).
Join Google Code & send me your username, so that I can give you ownership of the project.

Technically, since my project isn't open source, that would be copyright infringement, but, I will just politely ask you to remove it. I have the files in a SVN repository over at CodeSpaces, it is just different as my code isn't open source. If you would like to help, please PM me.

[ClipBucket]

Technically, since my project isn't open source, that would be copyright infringement....
LOL, LOL, LOL.....


....but, I will just politely ask you to remove it.

The project has been scheduled for deletion from Google Code.

https://vborg.vbsupport.ru/external/2009/08/65.jpg


I have the files in a SVN repository over at CodeSpaces, it is just different as my code isn't open source. If you would like to help, please PM me.
That's great, but what's the point in private SVN when the public release allows everyone to view & edit every line?
Maybe I missed something here?

[King Kovifor]

LOL, LOL, LOL.....


The project has been scheduled for deletion from Google Code.

https://vborg.vbsupport.ru/attachment.php?attachmentid=103220&stc=1&d=1250227705


That's great, but what's the point in private SVN when the public release allows everyone to view & edit every line?
Maybe I missed something here?

I thank you for removing the code. :) A private SVN is because this project isn't open source. Also, in terms of visible source, you have the problems of non-licensed users gaining access. And, if you would like an example of this, look @ vBulletin. That too is visible-source, but why don't we have access to the SVN repository? This is why I use my own private SVN server. And any developer on any of my project gains access.

[ClipBucket]

A private SVN is because this project isn't open source. Also, in terms of visible source, you have the problems of non-licensed users gaining access.
OK, I won't debate how this approach is an epic failure.
A few Google keywords will tell you that.

Back to the topic, what area(s) besides AJAX require assistance?

[King Kovifor]

Basically, not much. I could handle the rest, but I am an epic fail at AJAX. Like I said, if you would like to help, please PM me.

[bmckinley]

VBTwitter 1.0.3 worked fine when I was on vb3.8.3, since I installed 3.8.4, and updated to vbTwitter 1.0.4, have lost some function.

Still good on Oauth etc, but the "Tweet This" does not show up by the thread post number on each post. All I have is the "Tweet This Thread" in the postbit dropdown.

Any ideas??

[King Kovifor]

It seems like it lost the default code. I'll see if I can find it (but you can add it manually).

[SymbioteK]

Only able to tweet posts, not threads which is a major bummer.

[King Kovifor]

Only able to tweet posts, not threads which is a major bummer.

You can tweet threads. It's under "Thread Tools"

[JacquiiDesigns]

It seems like it lost the default code. I'll see if I can find it (but you can add it manually).

I did a fresh install on 3.8.3 - I also do not see the "Tweet This" link by the post number - So I too will like the manual code if possible!

Anyway - thanks for the modification Jeremy - it's very VERY nice - adds an awesome functionality for those of us really promoting the social network sharing!

Installed!

Jacquii.

[King Kovifor]

Here's the tweet this code:

<a href="tweet.php?do=post&amp;id=$post[postid]&amp;c=$post[postid]">$vbphrase[twitter_post]</a>

[bmckinley]

Do I dare ask where to stick it??? ;) ...

...Thanks, updated and working fine.

[JacquiiDesigns]

Thanks very much Jeremy! Works perfectly ;)

@bmckinley find
<if condition="$show['postcount']">#<a href="showpost.php?$session[sessionurl]p=$post[postid]&amp;postcount=$post[postcount]" target="new" rel="nofollow" id="postcount$post[postid]" name="$post[postcount]"><strong>$post[postcount]</strong></a></if>

And add the manual code before or after, depending on where you want the Tweet This link to show ;)

Jacquii.

[JacquiiDesigns]

* JacquiiDesigns nominates vBTwitter for MOTM!

I think the hack should be called vBTweet - but that's merely semantics LOL
Thanks again for the share ;)

Jacquii.

[King Kovifor]

Thanks very much Jeremy! Works perfectly ;)

@bmckinley find
<if condition="$show['postcount']">#<a href="showpost.php?$session[sessionurl]p=$post[postid]&amp;postcount=$post[postcount]" target="new" rel="nofollow" id="postcount$post[postid]" name="$post[postcount]"><strong>$post[postcount]</strong></a></if>

And add the manual code before or after, depending on where you want the Tweet This link to show ;)

Jacquii.

* JacquiiCooke nominates vBTwitter for MOTM!


I think the hack should be called vBTweet - but that's merely semantics LOL
Thanks again for the share ;)

Jacquii.

Thanks. And the name is derived as it becomes a bridge between vBulletin and Twitter. But, if it wasn't for their attempting to protect their name, I would have asked everyone to keep it in the name of the app.

[nickson]

everything was installed properly.... but the moment i try to tweet any thread... it goes to following URL which is https://twitter.com/oauth/authorize?oauth_token= and then it says following error:

Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again ? it was probably an honest mistake.

[cerulean]

Whenever I click the Tweet this link it brings up a message asking if I should allow access, I say yes and it errors out saying webpage is not found. I am using vBulletin 3.8.2.

It seems to be doing this on the call back url. I have it entered correctly.

This only happens right after install, all other attempts to tweet just reload the page with no errors.

Never mind, got it working, thanks anyway.

[King Kovifor]

everything was installed properly.... but the moment i try to tweet any thread... it goes to following URL which is https://twitter.com/oauth/authorize?oauth_token= and then it says following error:

Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again ? it was probably an honest mistake.


Did you set up an OAuth application?

[nickson]

Did you set up an OAuth application?


I signed up and put the the customer and sexcret key into my admin panel.. is that u mean or theres something more am i supposed to do?

[King Kovifor]

No. It doesn't work after you did that?

[Tom_S]

I went to this link http://twitter.com/oauth_clients and it only gave me access to a normal application which I filled out for access. No app for secrets or keys.

[Tom_S]

scratch that. I got it to work. ;)

[sdavis2702]

Awesome hack thanks alot!

EDIT: "Tweet this post" refuses to show up in Postbit_Legacy even after the manual update. Otherwise it works perfectly. I'm not sure that the problem is. Uninstall for now.

[Anopheles]

Hello from Cologne / Germany!

Question:
My vBulletin Board is ONLY 4 registered Members. NO Guest Allowed!

Need vBTwitter a Guest View???

Thanx a lot.....

[Biker_GA]

If you're sending out Tweets via Twitter, doesn't it defeat the purpose of not allowing guests to see what you're talking about? By allowing Guests to view the posts, it has the possibility of driving your membership up.

[Icehawk002]

King - OK, got #1 and #3 done - check it out - I'm using a graphic now, instead of the text:
http://www.theworshipcommunity.com/forums/welcome-announcements/3560-twc-mission-one-million.html.



I would also like to do this. Where is the code you edited to change text to an image?

thanks in advance

[designBox]

Thanks for the plugin but I am not sure how I can make it works...

I am actually developing a huge customized skin for my vbulletin.
So far, I see the "Tweet this thread" under the "thread tools". When I click on it, it say that my tweet has been successfully sent with the following error on the top of the page:

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(301) : eval()'d code on line 5However, nothing is published into my Twitter account (I use both a test account on my vbulletin and test twitter account).

Beside this, nowhere and never appears the link to "Tweet this post". Only when I use the default template (which is what I don't want) and it returns the same error as above.

At last, I am using vbulletin 3.8.4 and my board has been translated into french.

Thank for any idea how to debug this.

[puertoblack2003]

Thanks for the plugin but I am not sure how I can make it works...

I am actually developing a huge customized skin for my vbulletin.
So far, I see the "Tweet this thread" under the "thread tools". When I click on it, it say that my tweet has been successfully sent with the following error on the top of the page:

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(301) : eval()'d code on line 5However, nothing is published into my Twitter account (I use both a test account on my vbulletin and test twitter account).

Beside this, nowhere and never appears the link to "Tweet this post". Only when I use the default template (which is what I don't want) and it returns the same error as above.

At last, I am using vbulletin 3.8.4 and my board has been translated into french.

Thank for any idea how to debug this.



i do have that same error.But that just recently occured.but i can still post to twitter. not sure if its twitter or the board.

waiting for a solution. :)

[King Kovifor]

I will look into it, vBulletin version?

[puertoblack2003]

I will look into it, vBulletin version?

the notorious and stable 3.8.1 :D

[Sea Shepherd]

Nice one. Works well.

[designBox]

I will look into it, vBulletin version?

Any update on this?

[King Kovifor]

Can you tell me what line 301 is in your init.php?

[mattwmc2001]

Awesome hack thanks alot!

EDIT: "Tweet this post" refuses to show up in Postbit_Legacy even after the manual update. Otherwise it works perfectly. I'm not sure that the problem is. Uninstall for now.


Same for me. Doesn't show up.

Its in the thread tools but doesn't show on the post. :(

version 3.83

*Found a fix: https://vborg.vbsupport.ru/showpost.php?p=1869767&postcount=590

Couple posts or so below tells you where to but the code in the postbit_legacy

Now how to put an image there?

[redlabour]

This Mod will still not work. Clicked Link "Tweet this Thread" and nothing shows up at Twitter.

[King Kovifor]

This Mod will still not work. Clicked Link "Tweet this Thread" and nothing shows up at Twitter.

Set up your account?

[surfer2124]

Thanks for the plugin but I am not sure how I can make it works...

I am actually developing a huge customized skin for my vbulletin.
So far, I see the "Tweet this thread" under the "thread tools". When I click on it, it say that my tweet has been successfully sent with the following error on the top of the page:

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(301) : eval()'d code on line 5However, nothing is published into my Twitter account (I use both a test account on my vbulletin and test twitter account).

Beside this, nowhere and never appears the link to "Tweet this post". Only when I use the default template (which is what I don't want) and it returns the same error as above.

At last, I am using vbulletin 3.8.4 and my board has been translated into french.

Thank for any idea how to debug this.

i do have that same error.But that just recently occured.but i can still post to twitter. not sure if its twitter or the board.

waiting for a solution. :)

I am getting a similar error as well on 3.8.4. I can still post to twitter without issue

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(304) : eval()'d code on line 613


Also when a user is logged in who has not setup there VBTwitter options and they try to tweet the following errors occur, and they have to hit the browser back button.

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(304) : eval()'d code on line 613

Warning: Cannot modify header information - headers already sent by (output started at [path]/includes/class_core.php:3277) in [path]/tweet.php on line 12


Any ideas?


Thanks this is an awesome hack

[King Kovifor]

I am getting a similar error as well on 3.8.4. I can still post to twitter without issue

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(304) : eval()'d code on line 613


Also when a user is logged in who has not setup there VBTwitter options and they try to tweet the following errors occur, and they have to hit the browser back button.

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(304) : eval()'d code on line 613

Warning: Cannot modify header information - headers already sent by (output started at [path]/includes/class_core.php:3277) in [path]/tweet.php on line 12


Any ideas?


Thanks this is an awesome hack

I'm still looking at to what the original error is, but the tweet link shouldn't appear to those who haven't set it up.

[surfer2124]

I'm still looking at to what the original error is, but the tweet link shouldn't appear to those who haven't set it up.

I wil try re-installing and see what happens. I will post back with results


Thanks


Edit:

I re-installed and I am still seeing the same issues. I checked out this site (http://www.theworshipcommunity.com/forums/welcome-announcements/3560-twc-mission-one-million.html) which has your mod installed and when I click on the "tweet this post" icon it takes me to twitter and asks for my login info. How can I make this happen for my forum as well, am I missing something?

[King Kovifor]

That uses v1.0.4, which version do you have installed?

[surfer2124]

That uses v1.0.4, which version do you have installed?

v1.0.4


I am also running the following hacks, doea anyone know of any conflicts I overlooked?

Cyb - Advanced Forum Rules 4.0.2
Debug Mode 1.0.0
Enhanced Captcha Image Verification 1.11
v3 Arcade 1.1.1
vB Nexus 1.0
vbStopForumSpam 0.6
vBTwitter 1.0.4
vBulletin Tweet Poster 1.0.6


Edit: King it looks like is being caused by VBnexus. Once I disable it I have no issues and I am getting the same result as the forum listed above.


Thanks for the assistance

[King Kovifor]

v1.0.4


I am also running the following hacks, doea anyone know of any conflicts I overlooked?

Cyb - Advanced Forum Rules 4.0.2
Debug Mode 1.0.0
Enhanced Captcha Image Verification 1.11
v3 Arcade 1.1.1
vB Nexus 1.0
vbStopForumSpam 0.6
vBTwitter 1.0.4
vBulletin Tweet Poster 1.0.6


Edit: King it looks like is being caused by VBnexus. Once I disable it I have no issues and I am getting the same result as the forum listed above.


Thanks for the assistance

I will look into adding code to comply with vBNexus. ;)

[benstillman]

My tips and tricks of the day:

Remove the "tweet this" link, insert twitter icon only in first post, and tweet thread instead of just individual posts:

1) go to plugins, disable *Add "Tweet this Post!"* and *Add "Tweet this Thread!"*
2) in style manager, open postbit template
3) find: <if condition="$show['postcount']">#<a href="showpost.php?$session[sessionurl]p=$post[postid]&amp;postcount=$post[postcount]" target="new" rel="nofollow" id="postcount$post[postid]" name="$post[postcount]"><strong>$post[postcount]</strong></a> &nbsp;</if>
Add after: <!-- twitter -->
<if condition="$post[postcount] == 1">
<a href="tweet.php?do=thread&amp;id=$thread[threadid]&amp;c=$thread[threadid]"><img class="inlineimg" src="http://www.yourdomain.com/images/twitter-icon.gif" alt="Tweet this!" style="border-style: none"/></a> &nbsp;
</if>
<!-- / twitter -->
4) upload attached twitter-icon.gif image to your /images folder
5) follow ClipBucket's changes in posts 573 (https://vborg.vbsupport.ru/showthread.php?p=1866772#post1866772) and 574 (https://vborg.vbsupport.ru/showthread.php?p=1866776#post1866776).


Voila. You have what looks like:
- Example thread on my website http://www.ohio-riders.com/showthread.php?t=34530
- Example tweets on twitter http://twitter.com/benstillman

I've done something similiar with the Facebook submit, so I wanted the Tweet this to somewhat match. Even as a guest (or without your facebook info in your profile), it'll still work. It just asks you to log in and allow it.

[surfer2124]

I will look into adding code to comply with vBNexus. ;)

Thanks I will keep checking back

[War.Frog]

I just installed this on my 3.8.4 forum and the Tweet this Thread appears, but nothing at a post level. I use postbit legacy, and doesn't appear on even the default template. Any ideas?

[segwayon]

There's something odd with the zip file. Anyone else having issues downloading and unzipping it?

Update: Ah, not sure what was wrong, but it with my PC. I will usually right-click on the zip file and choose "Extract all. . ." but that Vista unzip feature was acting up tonight.

[od3m]

hey there...

first, thx for this great addon.

i got a little problem with it. i changed the "check it out" into "freakstyles.net" in phrases.. didnt work well, looks bad.

i changed back.. but now, the links from the board doesnt show up right.

now it looks like: Check this out! http://bit.ly/2dn48F

everytime i do not get my board url in twitter, but this bit.ly urls .... linked to my board. i dont know how ich can change back.

board url: http://board.freakstyles.net
test twitter: http://twitter.com/od3m1

i hope you guys can help me out...
and
sorry for the bad english..


greetings from germany
od3m

[King Kovifor]

The test twitter account still works...

[TheChaosFactor]

"Once a user defines their Twitter username & password within their vB Options (User CP -> Edit Options), the Tweet This X links will appear."

There are no fields for this in usercp -> edit options.

Do I need to create custom fields?

Edit: Would it be possible to make it tweet the thread title too? Can that edit be done in the same template as "Check this out" can be edited?

Edit2: Thanks for the mod btw. This is an amazing marketing tool.

[Maxman1544]

Great mod, thanks.

[King Kovifor]

That phrase is out of date, as it no longer requires a user to fill it in. :) And most of it has been rewritten or re-factored to include many new features already. Working towards a beta release. ;)

[TheChaosFactor]

That phrase is out of date, as it no longer requires a user to fill it in. :) And most of it has been rewritten or re-factored to include many new features already. Working towards a beta release. ;)
That's awesome. I can't wait. I think this has to be one of the most useful mods I have installed to date. Right now I'm the main one using it, but I'm getting a couple unique visitors every day as a direct result of tweeting threads.

[v12kid]

looking forward to an update as I desperately need a quality Twitter on demand function for my forums :)

[Megatr0n]

You MUST fill in the login on the redirect, then 'retweet' the one you want. There is no way around this. And please use the forums.

You mean login when it asks you to login after tweeting the thread? I've done that it then it takes me to my Twitter account and still nothing.

[JacquiiDesigns]

Hello Jeremy and everybody...

I've had this mod installed at http://wlsjourney.org for some months now. For some odd reason it has stopped working. The links show as you can see here (http://wlsjourney.org/community-forums/journey-community/questions-comments-feedback/476-interesting-facebook-exchange-administrators-reaction-someone-downing-wls.html)... Could there be some conflict with this mod and Tweetboard perhaps? IDK what the issue is really - any ideas?

Thanks,

Jacquii.

[michael million]

Hello There,

i need some help. If i klick on "tweet it", than i see the following error:
Parse error: syntax error, unexpected T_STRING, expecting T_OLD_FUNCTION or T_FUNCTION or T_VAR or '}' in /var/www/web3/html/zockerz/includes/class_twitterOAuth.php on line 16

Whats the Problem?

[King Kovifor]

Yes, it is perfectly plausible the two do not play nice, but I don't use either for me to test it out right this second.

[Nephalim]

freakin' awesome!!!

[bgootz]

Hello There,

i need some help. If i klick on "tweet it", than i see the following error:
Parse error: syntax error, unexpected T_STRING, expecting T_OLD_FUNCTION or T_FUNCTION or T_VAR or '}' in /var/www/web3/html/zockerz/includes/class_twitterOAuth.php on line 16

Whats the Problem?

Michael, I believe that problem comes up because you're not using PHP5. I got that error too before I started using PHP5.

[bgootz]

I'm trying to set up my Twitter settings through the UCP, I go to Edit Options and click on 'Setup integration by clicking here.' This takes me to a twiiter page (https://twitter.com/oauth/authorize?oauth_token=) that says

'This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake.'

I'm assuming I'm getting this error because there's no oauth_token provided? But I don't know how to resolve the problem. I've created OAuth Application and everything (though I don't know if I need to provide my consumer key/secret in the ACP for it work?) Thanks for the help.

[mykkal]

King,

did you ever release the patch that will allow us to change the "check this out" to the title of the forum?

I'm curious. Been waiting a year and I last remember you said a new version that would have this would be released. But the last version I have is only an authentication update.

Please let me know. If its not gong to be soon i will see about getting it developed. But you've always said it would be released within weeks.

So where is version 1.1?

[rmd1]

waiting for that too.....
with this in addition, it will be the best twitter plugin ;)

[mykkal]

waiting for that too.....
with this in addition, it will be the best twitter plugin ;)

Honestly, I don't think he's going to be release it. Its been the better part of a year now since I first heard mention of this.

Maybe he doesn't have time...But it obviously ain't gonna happen.
No answer has been realistic. Now i'm not getting answers at all...

:(

[King Kovifor]

Honestly, I don't think he's going to be release it. Its been the better part of a year now since I first heard mention of this.

Maybe he doesn't have time...But it obviously ain't gonna happen.
No answer has been realistic. Now i'm not getting answers at all...

:(

I'm sorry that I don't have time to be on here 24/7 to answer questions. My time for the past few months has been school -> home -> homework -> work -> bed. So, yeah, I don't have time to sit down and develop this to your standards. Its FREE! And v1.1 has about 10x more features planned than v1.0 would ever have had, so it takes more time.

[mykkal]

You've been telling me a "wait a few weeks" for a year.

What good is free when i'm getting older waiting on a beta?

[King Kovifor]

You've been telling me a "wait a few weeks" for a year.

What good is free when i'm getting older waiting on a beta?

Everyone gets older waiting for everything. What's the point in applying to a school, when I get older waiting for a reply? A job? A paycheck? The difference is this isn't my entire life. I don't spend every minute of every day on my computer developing.

[mykkal]

Everyone gets older waiting for everything. What's the point in applying to a school, when I get older waiting for a reply? A job? A paycheck? The difference is this isn't my entire life. I don't spend every minute of every day on my computer developing.

ok so during all of these replies... What is so wrong with clarifying when your release will be... which you've told me was immient since last February?

For some reason my question seems unreasonable to you. I don't get that. :confused:

[King Kovifor]

Clarifying the release? What's to clarify except that it's not ready.

[mykkal]

Clarifying the release? What's to clarify except that it's not ready.

Could I recommend a career in politics? lol....

[mykkal]

Sarcasm won't me get it done faster... or even help my will to finish it.

Guys this is funny. Watch for this posting to be deleted.

A while back I asked King if there was a immediate release of VBtwitter coming. He told me not worry 1.1 was around the corner. A few months later I asked again just cause I was willing to invest in the product myself. Being that he was on a school break he said he was working on a release to be made.

lol...Almost a year from the original question I asked again, politely, like I always do. His reply to me is in the quote above.

lol... dude really, i'm just asking if your going to do it because you've been working on it a year. Microsoft built a brand new extra complicated OS called windows 7 (beta) from scratch in that time.

My point is:
1. Why give an expectation? And if you aren't gung ho about developing it anymore just say so and move on. You did such a good job with the first release many have refused to delevop it because everyone is waiting on your next release.

2. if your working on something for a year and getting no where maybe ask for help. if you've actually been "working" on it.

3. Its free. Why be a jerk about it when a simple question is posed. You set the expectation it would be there. Not any of us.

4. I've noticed the number of installs decreasing or staying stagnant over time. Just saying...

I only want a simple answer. Are you still developing and if so when is a realistic release date? If not can we continue to develop your mod independently of you.

I've been asking the latter since April... :eek:

[King Kovifor]

Guys this is funny. Watch for this posting to be deleted.

A while back I asked King if there was a immediate release of VBtwitter coming. He told me not worry 1.1 was around the corner. A few months later I asked again just cause I was willing to invest in the product myself. Being that he was on a school break he said he was working on a release to be made.

lol...Almost a year from the original question I asked again, politely, like I always do. His reply to me is in the quote above.

lol... dude really, i'm just asking if your going to do it because you've been working on it a year. Microsoft built a brand new extra complicated OS called windows 7 (beta) from scratch in that time.

My point is:
1. Why give an expectation? And if you aren't gung ho about developing it anymore just say so and move on. You did such a good job with the first release many have refused to delevop it because everyone is waiting on your next release.

2. if your working on something for a year and getting no where maybe ask for help. if you've actually been "working" on it.

3. Its free. Why be a jerk about it when a simple question is posed. You set the expectation it would be there. Not any of us.

4. I've noticed the number of installs decreasing or staying stagnant over time. Just saying...

I only want a simple answer. Are you still developing and if so when is a realistic release date? If not can we continue to develop your mod independently of you.

I've been asking the latter since April... :eek:

Your "polite" replies have always been sarcastic and demanding. That's all I will say on that subject. Now, to comparing the amount of time it has taken me to developing this to Windows 7 is rather unfair. Microsoft has thousands of developers working 8 hour days, 5 days a week to develop the software. There's 1. Who can only devote at max, 2 hours a day to finishing this problem.

1. It will be released. I set the expectation and fail on it because of my life currently. My life isn't all peachy keen right now, and it's really hard for me to focus on school, let alone on anything else.

2. Who says I'm "stuck"? I only said that I lost my AJAX developer, so AJAX may not come to vBTwitter in v1.1.

3. The "simple" question has been posted several times by you, and the same answer has been given each and every time.

4. I don't care about number of installs. If only 1 person used my product, it would make me happy that one person has been helped by this program. Installs don't matter in my book.

Yes, I'm still developing it. A realistic release date? Within the next 200 years should cover it. Set the expectation realistic enough for you?

[mykkal]

Hilarious!

Actually your responses got more vague over time. I hope your life does get much more manageable for you.

But yea you did set some expectations and if people are taking you at your word at least tell us whats up before we have to ask you.

or if your giving updates... maybe put them in the first portion of the thread because this entire communication is too long to read entirely.

its not like people don't want what you have and I have even offered to pay for it to make it worthy of your time.

you've been pretty much a jerk about this subject.

[ragtek]

I'm the "bad guy", so sorry to everybody using this add-on and waiting for the new version;)

I was the co-developer and working on the javascript/ajax part, but i stopped the work because i decidet to switch to ipb because i was not happy with all the "bad news" about vB4 and i thought, that i will switch all my boards to ipb.

[mykkal]

I'm the "bad guy", so sorry to everybody using this add-on and waiting for the new version;)

I was the co-developer and working on the javascript/ajax part, but i stopped the work because i decidet to switch to ipb because i was not happy with all the "bad news" about vB4 and i thought, that i will switch all my boards to ipb.

please help him? will pay!

[JacquiiDesigns]

...because i decidet to switch to ipb because i was not happy with all the "bad news" about vB4 and i thought, that i will switch all my boards to ipb.

wow. The third "well-known" (as far as I'm concerned) that has given such feedback regarding vBulletin. And I just have to ask ((sorry for the off-topic in advance - but curious mind(s) want to know...)) -- How's IPB working out for you? Feel free to PM me. Thanks ;)

Jacquii.

[ragtek]

As you see, i'm back and active in the vB scene;)
ipb is a very good product, but i decided to stay with vb and to give "vbulletin solutions" a chance, because it would be too much work, to rewrite all my custom stuff(my boards are very heavy modded^^) into the ipb "framework"
also my member "killed" my, as they read that i will switch the forumsoftware, they don't wanted something new...

sorry for offtopic^^

[JacquiiDesigns]

As you see, i'm back and active in the vB scene;)
ipb is a very good product, but i decided to stay with vb and to give "vbulletin solutions" a chance, because it would be too much work, to rewrite all my custom stuff(my boards are very heavy modded^^) into the ipb "framework"
also my member "killed" my, as they read that i will switch the forumsoftware, they don't wanted something new...

sorry for offtopic^^

Glad to know - I've been part of the vB scene for a minute or two and know the caliber of your work ==> I'm glad to know that you are addicted to vB https://vborg.vbsupport.ru/ and also that your opinion of IPB is very good as well... Thanks ^.^

Jacquii.

btw - I don't think you are the "bad guy" lol - Stuff happens... Anyway - it will be nice to see you and Jeremy working together on the 1.1 version vBTwitter :)

[King Kovifor]

Glad to know - I've been part of the vB scene for a minute or two and know the caliber of your work ==> I'm glad to know that you are addicted to vB https://vborg.vbsupport.ru/ and also that your opinion of IPB is very good as well... Thanks ^.^

Jacquii.

btw - I don't think you are the "bad guy" lol - Stuff happens... Anyway - it will be nice to see you and Jeremy working together on the 1.1 version vBTwitter :)

He's always welcome back. :)

[JacquiiDesigns]

He's always welcome back. :)

That's what they all say - but I'll always remain of the concept that my eyeballs will show me better than they can tell me ;)

Jacquii.

[King Kovifor]

That's what they all say - but I'll always remain of the concept that my eyeballs will show me better than they can tell me ;)

Jacquii.

It's true. If he expresses interest in wanting to come back, he is more than welcome to.

[beatthecasino]

When I added this mod none of the
LinkBack Thread Tools Display Modes will expand.

Example is here.

Beatthecasino.com/bb click on any thread.
Any ideas?:eek:

KS

[JacquiiDesigns]

It's true. If he expresses interest in wanting to come back, he is more than welcome to.

That's actually rather kind Jeremy. And wow - What a tortuous relationship between myself and a former-client ==> just ended - and not on the best of terms by any stretch of the imagination. I love the concept of welcoming someone back to the fold - so I hope you guys' relationship is still on good terms, because we all love the work you two have done with vBTwitter :)

Jacquii.

[King Kovifor]

That's actually rather kind Jeremy. And wow - What a tortuous relationship between myself and a former-client ==> just ended - and not on the best of terms by any stretch of the imagination. I love the concept of welcoming someone back to the fold - so I hope you guys' relationship is still on good terms, because we all love the work you two have done with vBTwitter :)

Jacquii.

He left on good terms. :)

[JacquiiDesigns]

He left on good terms. :)

Sweet! Well - keep up the good work then. You already know your work has been appreciated and will especially be appreciated when you release an upgrade of vBTwitter ;)

Jacquii.

[muckleroy]

I think the TWEET would be more interesting if the title of the post was included. I've been poking at it, but can't quite get it.

Basically it would read "TonyMuckleroy Check this Out! Tiger Woods Crashes Car! http://www.xjtalk.com/tp.php?i=25869&c=25869"

In this example; "Tiger Woods Crashes Car!" is the title of the thread.

[madmax1228]

Installed, but I keep getting a "Whoa THere" message from Twitter saying my token information is already in use. I am sure I have something set incorrectly. If anyon can point me in the right direction, I would appreciate it.

[beezo]

Installed, but I keep getting a "Whoa THere" message from Twitter saying my token information is already in use. I am sure I have something set incorrectly. If anyon can point me in the right direction, I would appreciate it.

I'm getting the same thing.

[madmax1228]

I have tried all I can to make it work. I am sure the issues is in something I did, but can not find it. Hopefully someone will chime in with a solution before I pull the mod out.

[King Kovifor]

I have tried all I can to make it work. I am sure the issues is in something I did, but can not find it. Hopefully someone will chime in with a solution before I pull the mod out.

Did you register an OAuth application?

[madmax1228]

Yes, I followed the directions at the top of the thread or at least I attempted to follow those directions.

Here is what I get when trying to tweet a thread or post.

Woah there!
This page is no longer valid. It looks like someone already used the token information you provided. Please return to the site that sent you to this page and try again … it was probably an honest mistake.

[King Kovifor]

Crap. There's a step that's missing up there... You need to post the OAuth keys in your vBSettings for vBTwitter.

[madmax1228]

I caught that. Near as I can tell barring a setting incorrect on my end, Twitter is not generating fresh keys, but again, just a WAG.

[King Kovifor]

I caught that. Near as I can tell barring a setting incorrect on my end, Twitter is not generating fresh keys, but again, just a WAG.

You've added them?

[madmax1228]

I have added them. I have regenerated them several times and still get the same message. Strange.

[King Kovifor]

I have added them. I have regenerated them several times and still get the same message. Strange.

Hm. I know vBTwitter does the job correctly...

[OSanchez]

I get this error when I press "Tweet Post". Please help me.

Warning: array_merge() [function.array-merge]: Argument #1 is not an array in [path]/includes/init.php(304) : eval()'d code on line 613

Warning: Cannot modify header information - headers already sent by (output started at [path]/includes/class_core.php:3277) in [path]/tweet.php on line 12

[cheat-master30]

Same error as above, have all the application and stuff working, PHP 5.2.6 or something, MYSQL 5 and CURL enabled.

[King Kovifor]

do you have php5?

[OSanchez]

5.2.9 is what I have.

[runwtdevil]

I'm having a similar problem to the one's posted on the last 2 pages. I successfully downloaded it, installed it, and entered my consumer key's. I allowed Access to twitter, but when I tweet threads or posts, they don't appear on the twitter account. It's like nothing happens when I click "tweet this post". Any help would be greatly appreciated. Great Mod by the way.

[King Kovifor]

I'm having a similar problem to the one's posted on the last 2 pages. I successfully downloaded it, installed it, and entered my consumer key's. I allowed Access to twitter, but when I tweet threads or posts, they don't appear on the twitter account. It's like nothing happens when I click "tweet this post". Any help would be greatly appreciated. Great Mod by the way.

Did you add the keys to your ACP settings?

[OSanchez]

I did.

[cheat-master30]

I did as well. Still didn't work.

[runwtdevil]

Yes I added them.

[ProFifaLeagues]

Same for me ive added the keys etc in admin cp and can click to (twit this thread) but it still doesnt show on my twitter page,any ideas guys?

[AndyMP]

Same, I did a completely new installation (never used the modification before) following the instructions. But there is no place in the Edit Options for a user to put their username/password for twitter and when I click the authorize link, twitter doesn't seem to recognise that a user has been added because in the twitter/application settings it still shows "0 users".

[King Kovifor]

I will attempt a new install soon, since the process must have changed at some point.

[OSanchez]

Same, I did a completely new installation (never used the modification before) following the instructions. But there is no place in the Edit Options for a user to put their username/password for twitter and when I click the authorize link, twitter doesn't seem to recognise that a user has been added because in the twitter/application settings it still shows "0 users".

Did you go to User CP->Edit Options->Scroll down to vbTwitter????? It should take you to twitter.


In my case it all works except when Tweeting a post.

[ProFifaLeagues]

Same here all working well apart from when trying to tweet a post it acts as if its been done but doesnt appear on my twitter page!!

[AndyMP]

Ok, something happened today ! I logged onto Twitter and my account had a message saying "I have successfully set up my account to work with vbtwitter at one of the sites that I visit - this message means that it was successful".

And sure enough, when I selected to tweet a thread it appeared on my twitter page. So everything seems ok after all, except that while I can tweet a thread I can't tweet an individual post.

[hogan00]

I know this is a stupid question..but...what folder do I upload the "upload" contents to???

[cheat-master30]

^Whatever folder your forum files are in. So if a file was in 'upload/admin', you'd upload it to the forum admin folder, etc.

[MotMann]

a) What i must set by the Question:
"Use Twitter for login"
in the Registration???

b) And what i must do, that i can found the Twitterlink (Twitter Post) over each posting?

Thank's

[kevcj]

Wonderful modification, works PERFECTLY!!!

Thank you!!!

Nominated for mod of the month

[Tenth Doctor]

Does this work on vB 4.0.1? forum and CMS?

[steeler7]

The last part in the directions regarding the tp.php file is that for 3.5 users or something that needs to be done? I'm not getting "tweet this post" to show up

[Speysider]

In the zip file, I get weird files in it.
Which ones do I extract?

[vbreal]

anyone have any issues with twitter not letting them register the application?

[morrow]

anyone have any issues with twitter not letting them register the application?

Make your description longer than 30 characters.

[Karm4]

Couldnt get it to work, received error Fatal error: Call to undefined function curl_init() in /var/www/clients/client4/web17/web/vb/includes/class_twitterOAuth.php on line 115

[anilbhat]

OK i installed this .
That is i uploaded the contents on upload to the directory where i have vbulletin installed.
I Imported the product file

What i dont understand is, where to put my consumer keys etc ?

[anilbhat]

ok i got it!. I edited the key!

But i don't see the tweet option in thread tools

i have php 5.2 and i don't see curl error messages

[z0diac]

There's an application signup question that your instructions don't mention :

Use Twitter for login: [ ] Yes, use Twitter for login

...so I'm not checking that box for now. Hopefully that's what I'm supposed to do.

[mykkal]

Does anyone know how to get it to tweet the name of the post instead of "Check this Out"?

[King Kovifor]

There's an application signup question that your instructions don't mention :

Use Twitter for login: [ ] Yes, use Twitter for login


...so I'm not checking that box for now. Hopefully that's what I'm supposed to do.

Yes, please leave that unchecked. I am not sure what that can do to your board, since no support has been coded.

Does anyone know how to get it to tweet the name of the post instead of "Check this Out"?

There is unreleased experimental code. I have restructured my release goals, with the hopes of a faster release.

[windrider07]

I can't get posts from my forum to show up as tweets on my twitter site.

On the Connections Tab in my Twitter Profile Settings I see a "No applications have been approved to use your account." message but I can see the application settings when I go to http://twitter.com/apps.

Any ideas on why my posts won't show up? I got the keys and put them into my vBulletin admin settings.

EDIT: Got it to work. Had to edit my User CP options and set it up to allow access.

"Once a user defines their Twitter username & password within their vB Options (User CP -> Edit Options), the Tweet This X links will appear."

That should be in bold print and underlined lol....in order to make this mod work, make sure to do this....:P

[Kai77]

Does anyone know how to get it to tweet the name of the post instead of "Check this Out"?

I'd love to have this too and maybe the first few words from the post.
so the 160 twitter limit is filled up automatically.

ok after playing little bit around with this add-on I have some feature requests *g*

Tweets like this:
breadcrumb - title - post teaser - link
filled up to max 160 characters
and the possibility to preview and edit the tweet before final submission

link (for the tweet) changeable in admincp settings for being able to add own, alternative short domain name

instructions for url rewrites via mod_rewrite

I would really appreciate that

[John Streetz]

Any chance of getting this for vB4.0.x? That would be awesome. Currently it messes up the edit profile setting page if installed on vB4.0.x. I didn't get far enough to see if it worked once the twitter account was set up in UserCp.

[Speysider]

I have a question. When I download the .zip, I get loads of duplicate files. Which files do I upload to the server??

/me marks as installed

[Patricio Murphy]

I get to the point where I see the Tweet this! over the message creation box, but when I click it nothng happens.
In my User CP I only find a "Setting up integration with Twitter through this forum will turn on any "Tweet This" feature on this site. Setup integration by clicking here." I click, get the message asking if I allow it, say OK, get redirected to my forum, and nothing more. I don't find any place where I can add my Twitter account info to my vB account.
Any suggestion?

[Patricio Murphy]

Finally worked!
I had set up by mistake "read only", no wonder it didn't work...

[appsfinder]

hi installed ok but do not see link to tweet this post in my post can you help?

[04Venom]

I was going to move on installing this. However it looks like a stable version has been released for vBulleting 4.0.X as yet.

Is this a true statement?

[appsfinder]

Couldnt get it to work, received error Fatal error: Call to undefined function curl_init() in /var/www/clients/client4/web17/web/vb/includes/class_twitterOAuth.php on line 115


i got same if using php4 on server

[Goomzee]

my postbit not works

[onealien]

is there anyway to set ALL new threads or ALL posts to go to my website's own twitter page?

i mean in addition to the users page...

thanks

[onealien]

another problem with the OAth set up...

its telling me those links are "invalid url format"....???

[Goomzee]

my postbit not works

Need your support

[edward hamilton]

Did you go to User CP->Edit Options->Scroll down to vbTwitter????? It should take you to twitter.


I don't see any options in the CP -> Edit Options either.

I installed everything, made temp changes, entered the auth codes, see them in my database. When I clicked Tweet This under Thread Tools the first time, I get taken to Twitter asking me if I authorize this action. Everything seems to be working except nothing happens when I Tweet This and there are no option in the Control Panel.

vB 3.8.6 patch 1, PHP 5.2

Like some of you I was looking for another forum software after trying to deal with vB 4.0 but gave up on it after consulting the forum members on changing the forum and I don't have the time to make it look the same now.

Would love to be able to Tweet from this forum.
Thanks in advance for all your hard work.

[abhisays]

Thanks a lot for this mod.. Just installed..

[Abfabmedia]

We are getting the following error on our General Settings page - can anyone offer any advice?


Warning: fetch_template() calls should be replaced by the vB_Template class. Template name: modifyoptions_vbtwitter in [path]/includes/functions.php on line 4007

[Hornstar]

I disabled the product, upgraded to VB4, and than decided to uninstall it.

This is the error I get when trying to uninstall version 1.0.3
Invalid SQL:
ALTER TABLE `vb3_user` DROP COLUMN `twitter_size`;

MySQL Error : Can't DROP 'twitter_size'; check that column/key exists
Error Number : 1091

So it won't go past that step, and I can't uninstall it now. What should I do?

[Gamelobby]

I got an issue...

> 1st i was having issues with an error msg when you go to UserCP>Edit Options
Warning: mcrypt_decrypt() [function.mcrypt-decrypt]: Size of key is too large for this algorithm in [path]/profile.php(1906) : eval()'d code on line 4


> That was with 1.0.3, & now i upgraded to 1.0.4 & i get this page when i try to "Tweet This"
(see image)


> Then i click allow i get the "oops" page. (see image)

Thanks :D

[x YNWA x]

Does this work on VB 4.1? Also looking for a twitter login plugin like facebook. Any ideas? Cheers

[dionak]

Sweet! Does this work for vB4? Thanks!

[Alfa1]

A twitter login function would be awesome.

[Gamelobby]

Does this work for vB4? Thanks!

It works on my 4.1.2, except for on the EditOptions page i get this error on top of the page, & it screws up my menu buttons, etc.

Error on top
Warning: fetch_template() calls should be replaced by the vB_Template class. Template name: modifyoptions_vbtwitter in [path]/includes/functions.php on line 4097


On top of this page only
http://www.gamelobby.com/Forum/profile.php?do=editoptions

[dionak]

It works on my 4.1.2, except for on the EditOptions page i get this error on top of the page, & it screws up my menu buttons, etc.

Error on top
Warning: fetch_template() calls should be replaced by the vB_Template class. Template name: modifyoptions_vbtwitter in [path]/includes/functions.php on line 4097


On top of this page only
http://www.gamelobby.com/Forum/profile.php?do=editoptions

Sorry I'm a bit lost. How does it connect to the Edit Options page? Thanks!

[Gamelobby]

I have no idea how it connects to Twitter, but i see vBTwitter in the error msg. :D

Warning: fetch_template() calls should be replaced by the vB_Template class. Template name: modifyoptions_vbtwitter in [path]/includes/functions.php on line 4097

[c0der]

nice

thx for sharing

[pleroy]

First of all, thanks for this add-on !

How would it be possible to make it tweet the URL and the thread title ?

Do you plan on adding URL shortener integration (ie Bit.ly) ?

Oh and I'd like to restrict this Tweet function to a few forums, not all my forums. How do I do it ?

[yildirimr]

oh I missed the update on this, Thanks :)

[scubasteve3]

Does this work for 4.XX? Not showing up in my vBulletin Options. I'll try reinstalling

[arabsdotcome]

If someone does reply to the tweet, can this tweet be posted as a reply on the vbforum?

[ITalkCash]

Will this allow my forum to auto tweet all posts made on it?

[BigFooty]

Use http://twitterfeed.com - just feed it the RSS URL for your forum and set it to check every minute or so.

[justpete]

hi - Noob here. I installed this on my server, and the settings page became all garbled. When I disabled the plugin, it fixed the issue.

Is this a CURL issue? or something else, perhaps?

[gopherhockey]

Ok I know this mod is old, but I still use a customized version. It appears the new Twitter API may have broken this. Anyone have any idea how to fix?

[designBox]

Ok I know this mod is old, but I still use a customized version. It appears the new Twitter API may have broken this. Anyone have any idea how to fix?

Sams situation here....
Anyone?

[gemmstore]

Not working

[Bill1965]

If any one can fix this I will make a donation .Thank you

[iref2010]

Does this work for 3.8.7?

[iref2010]

If any one can fix this I will make a donation .Thank you

Me too!!!!