Display Unread Posts and New Reputation Comments

[Paul M]

As of 24 Nov 2017 this modification has been withdrawn.

Note: The unread posts portion of this hack only works if you use the database thread marking system, also, this attaches itself to certain phrases in the "welcome" box and will not work if they are not present (or are modified by other code).

FYI, the Forum Marking Choices are located in vBulletin Options ;
vBulletin Options > General Settings > Thread/Forum Read Marking Type

The Read Marking options were removed from vB 3.8.11, it defaults to database marking.


** For vBulletin 3.8.11 you will need to use the Unread-posts-3811.zip **

This displays the actual number of posts that are still considered unread by you (and will show up in a 'getnew' search). It also displays the number of new reputation comments since you last checked your usercp.

There is the option to count the unread posts since your last visit, or all posts considered unread. This setting reflects the divider in the 'getnew' search display. There is also the option to disable the unread posts display or the new reputation comments display.

There is also the option to display the New Reputation Comments counter as a Welcome Box Notification.

All settings are located in vBulletin Options > Display Unread Posts and Reputation.

Version 3.8.001 adds support for forums excluded if you have the "Get New/Get Daily Opt Out Modification" installed (by Andreas).
Version 3.8.004 adds support for forums excluded if you have the "Selective Forum Filter Modification" installed (by Psionic Vision).

To install this hack unzip the xml file and import it using the ACP Product Manager.


History:

v3.8.001 : Initial vb 3.8 Release.
v3.8.002 : Fix forum exclusion bugs.
v3.8.003 : Fix spelling and phrase bug.
v3.8.004 : Added support for Psionic Visions Selective Forum Filter.
v3.8.005 : Updated version for vBulletin 3.8.11 (only).

[jammiedodger546]

Thanks for the update :)

[SuperDave71]

THANK YOU Paul!! I was waiting for this one!

-Dave

[Problemsolver]

Does this show total unread post or unread posts since your last visit?

[Paul M]

Either.

There is the option to count the unread posts since your last visit, or all posts considered unread.

[ScienceOfMuscle]

Thanks for the update Paul... quick question though. I suspect the "Unread Posts" link uses a relative link, and not a fully qualified link. And on my vbAdvanced page it links to http://scienceofmuscle.com/search.php?do=getnew and not http://scienceofmuscle.com/forum/search.php?do=getnew

Is there a place I can change this?

[Paul M]

Update the appropriate setting in the mods options.

[Deimos]

Quick question for ya Paul
I have this set to display on every page (in the navbar area)
Is this a bad idea? I was wondering what impact this would have on server performance if it's displayed one every page. (I assume it runs a query for EVERY page visited?)

[Paul M]

Are you sure you have posted in the correct thread ? - this mod runs on every page by default, there is no option to prevent it (as it wouldnt make sense).

[Deimos]

Oh! My bad
I was under the impression it only showed on the main page, heh

Sorry about that :P

[RocCityDad]

Note: The unread posts portion of this hack only works if you use the database thread marking system, also, this attaches itself to certain phrases in the "welcome" box and will not work if they are not present (or are modified by other code).

Hello just gettin started on a forum, I'm a newbie, not sure what you mean by this any info would be helpful?

[Paul M]

The database thread marking system is a setting in vbulletin options.

Unless you have modified your navbar template, you dont need to worry about the rest.

[music legend]

does this run an extra query each time the page is loaded?

[Paul M]

Yep, sure does.

[thedudleys]

isn't this the same one that Webtalkforums' uses?

[CPOWA]

Installed. Thanks for the update, Paul :)

[Leo Brazil]

This displays the actual number of posts that are still considered unread by you (and will show up in a 'getnew' search). It also displays the number of new reputation comments since you last checked your usercp.

Where exactly was unread posts was supposed to be displayed ? I've checked usercp and could see no difference at all and I did have unread posts the moment I checked that.

FYI, the Forum Marking Choices are located in vBulletin Options ;
vBulletin Options > General Settings > Thread/Forum Read Marking Type

Yes, this is set correctly.

Any tips ?

[tei727]

Thank you paul!
One issue I'm having. I see the notification and when I click the Your Notifications Dropdown I see the number but the text is blank in the dropdown.

[Blue91]

Can someone give a screenshot of this in action?

Thanks.

[tei727]

Thank you paul!
One issue I'm having. I see the notification and when I click the Your Notifications Dropdown I see the number but the text is blank in the dropdown.
Nevermind. It just started showing up..lol

[jazde86]

Hmm, if I disable the Display New Reputation Comments option it still shows up in the navbar. :( This option and the variable $unread did not work anymore on my vBa Portal with the 3.8 Version.

[ericgtr]

Installed. Thanks Paul.

[profanitytalker]

Hey Paul, this is a great hack. I use it on my forums. Anyways, do you know what I need to put if I modified my welcome block? What script do I need?

[Paul M]

Dont really understand the question.

[2L8]

works good ,installed!thx

[hambil]

Hey Paul, I use this along with Get New/Get Daily Opt Out Modification and the numbers don't match. It's most obvious when this tells me I have one new post, and click on the link takes me to the new post page which says there are no new posts.

Not sure what the deal is - I will look into it - but wanted to let you know it does not appear to integrate properly with Get New/Get Daily Opt Out Modification as stands.

[MrBig]

can a brotha get a screen cap?

[paintballer.ie]

Hey Paul, great mod.

Would it be possible to code a version that only displays the number on unread posts in brackets beside the 'new post' link in the nav bar.

e.g. .....Community.......Calendar...........''New Posts (10)'' ............Search

Thanks

[Paul M]

Hey Paul, I use this along with Get New/Get Daily Opt Out Modification and the numbers don't match. It's most obvious when this tells me I have one new post, and click on the link takes me to the new post page which says there are no new posts.

Not sure what the deal is - I will look into it - but wanted to let you know it does not appear to integrate properly with Get New/Get Daily Opt Out Modification as stands.


Hmm, I havent ever used that mod, I will install it and see if I can replicate the issue.

[hambil]

Hmm, I havent ever used that mod, I will install it and see if I can replicate the issue.
Um, but, your mod info says "Version 3.8.001 adds support for forums excluded if you have the "Get New/Get Daily Opt Out Modification" installed (by Andreas)." And that's the mod I'm talking about.

[Paul M]

Yes, I know what it is, but I dont use that mod myself, therefore I dont have it installed.

[Paul M]

Yep, neither the opt out exclusions or the internal modifications exclusions were working correctly. Should be fixed in 3.8.002

[hambil]

Thanks Paul - fantastic work as always :)

[Adavis]

I am a VB newbie. How do I upgrafe to 3.8.002? Just few days using VB and this mod too...

[Paul M]

Just repeat what to did to install it, making sure you tick the overwrite option.

[Adavis]

I did it. When i hit the link for the new post I get that:

http://www.michanikos.gr/search.php?do=getnew[ARG:4%20UNDEFINED]

What is [ARG:4%20UNDEFINED]?

[Paul M]

I would guess you have translated one of the phrases - four phrases have been changed so you will need to revert/re-translate them.

[Leo Brazil]

I did it. When i hit the link for the new post I get that:

http://www.michanikos.gr/search.php?do=getnew[ARG:4%20UNDEFINED]

What is [ARG:4%20UNDEFINED]?

I've got the same here, I saw this is related to some phrases that were updated but I'm still trying to seek the differences between old and new ones.

[Paul M]

The error gives a clue as to the difference - argument 4 has been removed.

The phrase this applys to for most people is "dup_posts".

[Leo Brazil]

You're are right Paul, "dub_posts" is exactly the phrase related to this error.

I think I know what the problem is but I will make some tests and let people here know what I can get.

[paintballer.ie]

Edit.... sorry found what I was looking for.

https://vborg.vbsupport.ru/showthread.php?t=201308

[Leo Brazil]

I've got the same here, I saw this is related to some phrases that were updated but I'm still trying to seek the differences between old and new ones.

Just an update about this. It's easier to solve than it looks.

Just go to AdminCP < Language and Phrases < Get Uptaded Phrases

You'll see 4 phrases related to this mod on this list.

All phrases like: "dup_posts" "dup_noposts" and so on.

You don't actually need to translate everything again. Just locate on those phrases "/search.php?do=getnew" and you will see there is a argument after it like {4}, just delete it.
But it's not the only phrase in this situation the others on the list you'll have to do the same, just different arguments.

[Hannan]

Just an update about this. It's easier to solve than it looks.

Just go to AdminCP < Language and Phrases < Get Uptaded Phrases

You'll see 4 phrases related to this mod on this list.

All phrases like: "dup_posts" "dup_noposts" and so on.

You don't actually need to translate everything again. Just locate on those phrases "/search.php?do=getnew" and you will see there is a argument after it like {4}, just delete it.
But it's not the only phrase in this situation the others on the list you'll have to do the same, just different arguments.

Thank you dude

[CPOWA]

Upgraded :)

I was checking it out the XML before I uploaded it... That's a slick script!

Thanks Paul.

Regards,
Nita

[popowich]

Hello,

I am having a problem with this product on a vB 3.8.1 forum.

The problem started after I upgraded the site from around 3.7.0 to 3.8.1.

I uninstalled the old version of this product and installed this version.

When going the control panel (usercp.php) I get this MySQL error:

MySQL Error : Unknown column 'lastrepcheck' in 'field list'

If I disable this product the error goes away.

If I disable reputation the error still appears.

If I revert the USERCP template and reinstall this product I still get the error.

Is this problem related to the XML not installing correctly?

Is there a different problem such as a bitfield file from an older version of this product sitting on the server?

Any thoughts on how to correct this and get the product working would be appreciated.

Thank you,

-Raymond

[Paul M]

Uninstall it, then re-install it - that should recreate the missing column.

[popowich]

I thought I covered all of the easy troubleshooting. :(

That fixed the problem. Thanks!

-Raymond

[Paul M]

I thought I covered all of the easy troubleshooting. :(

No worries, as long as it worked :)

[EagleNick]

I have the options set to "Count All Posts Marked as Unread"
I have the issue with the link taking me to this: mysite.com/forums/search.php?do=getnew[ARG:2%20UNDEFINED].

I read about something with the dup_posts phrase, but I don't see anything wrong with it... this is what it is: You Have <strong>{1} <a href="{3}search.php?do=getnew">Unread {2}</a></strong>

What else could be the problem?

[Paul M]

What else could be the problem?
I have no idea, I cant see how you could get such a message.

[EagleNick]

I have no idea, I cant see how you could get such a message.
Okay, I guess using this mod just isn't a viable option for me then.

Thanks ;)

[hambil]

The message does look similar though... the "UNDEFINED" is triggering something for me. Let me do some searching.

Ahha - I knew I'd seen it somewhere before: https://vborg.vbsupport.ru/showpost.php?p=1740690&postcount=4241 - something about languages.

ARG4 undefined means : you haven't imported the last english language file !

[EagleNick]

The message does look similar though... the "UNDEFINED" is triggering something for me. Let me do some searching.

Ahha - I knew I'd seen it somewhere before: https://vborg.vbsupport.ru/showpost.php?p=1740690&postcount=4241 - something about languages.
Well what does ARG20 mean then? I can't seem to find it...

[hambil]

%20 is an html encoded space. So, ignore it. What you are seeing is [ARG:2 UNDEFINED], which means it can't find the phrase it is trying to use for argument 2. My guess is, there is a problem with your language(s).

[Paul M]

Argument 2 of that phrase is another phrase that is part of this product - the only possible way you could get it is if vbulletin didnt import the phrases properly, or you have somehow deleted the phrase - uninstalling and re-installing might fix that, otherwise, still no idea.

[Dennis B]

I'm also getting [ARG:4 UNDEFINED] here, using another language as default...

[Dennis B]

And here's why...

The "old" phrase used to be

You Have <strong>{1} <a href="{3}search.php?do=getnew{4}">Unread {2}</a></strong>

And the new phrase lacks the {4}.

[Redzzand]

does this mod conflict with any other mods? MGC chatbox stopped loading on my site as soon as i installed this mod....

disabled it, and now my board is back to normal.

any ideas?

[Paul M]

No idea, I know nothing about MGC Chatbox.

[hambil]

I run this and the chatbox (great chatbox), and have no problems.

[paintballer.ie]

I have installed this again. Would it be possible to get a solution to a previous questions.

What to I have to edit /remove or add to get the results in the navbar instead?

Thanks

Hey Paul, great mod.

Would it be possible to code a version that only displays the number on unread posts in brackets beside the 'new post' link in the nav bar.

e.g. .....Community.......Calendar...........''New Posts (10)'' ............Search

Thanks

[EagleNick]

%20 is an html encoded space. So, ignore it. What you are seeing is [ARG:2 UNDEFINED], which means it can't find the phrase it is trying to use for argument 2. My guess is, there is a problem with your language(s).

What could be the problem with the language? What phrase is missing or corrupt?

Argument 2 of that phrase is another phrase that is part of this product - the only possible way you could get it is if vbulletin didnt import the phrases properly, or you have somehow deleted the phrase - uninstalling and re-installing might fix that, otherwise, still no idea.

Well I don't know what the name of the phrase that is corrupted is. I uninstalled and re-installed, but it didn't work.

What phrase should I look into?

--
Note that this issue only occurs when I use the "Count All Posts Marked as Unread" option. The others work fine.

[Paul M]

Sorry, but unless you want to give me admin access to your forum there is nothing I can really tell you.

[LokisFeuer]

And here's why...

The "old" phrase used to be

You Have <strong>{1} <a href="{3}search.php?do=getnew{4}">Unread {2}</a></strong>

And the new phrase lacks the {4}.

Perfect! This one solves the problem.
The "{x}" behind the "getnew" is probably not longer needed.
I just deleted it and now it works perfekt. :D

- Loki

[physiart]

Well, I upgraded from a previous version and it's not showing anything in the welcome box. Then I downgraded again in my old version but still nothing's showing.

Any ideas?

[PrincessFiona]

I keep getting a database error when I try and install it. It says checking for index/installing index and then it just never installs and eventually gives me a database error page.

[Paul M]

and what exactly is the database error ?

[SliceofLife]

Hi. It's not showing up any new reputation comments received even though I've followed the instructions.

[suvari1794]

New messages text's link is broken; http://www.site.com/forum/search.php?do=getnew[ARG:4%20UNDEFINED]

?

[Gio Takahashi]

Okay, now I uninstalled this and reinstalled it in order to fix this mod, and get rid of the "ARG" crap, and now it's showing a completely blank line.

[Paul M]

New messages text's link is broken; http://www.site.com/forum/search.php?do=getnew[ARG:4%20UNDEFINED]

?
You have a custom version of one (or more) of the phrases. You must delete/revert them.

[suvari1794]

Thank you. I fix it.

[gigglegirl]

Hi, I love this mod and so do the members. Unfortunately it's not working since i upgraded to 3.8.2. I suppose its because of the database thread marking system? Would you explain how i can fix that? I 'm still somewhat of a nOob and don't know where to go to fix the database thread marking system. Thanks for any help. :)

[Paul M]

Upgrading would not change the DB marking system.

[mikey1991]

great mod! As with all your mods

*installed*

I'm gonna be a perfectionise nitpicker, but you misspelt "Exclude" in the mod options, there it is spelt "Exlude" or something similar.

great mod nonetheless :)

Thanks alot

[Paul M]

Yep, you are correct. Fixed locally in my cvs, but I'm not releasing an update just for that, people can edit the phrase themselves if they notice.

[Stormraven]

I'm having a few problems with this plugin, im trying to exclude a forum from the unread posts feature, i dont want it to recognize new posts in a certain forum, but when i do i get this message when i try to click on the 'display undread posts' in certain usergroups, it doesnt seem to happen with mine, but the URL changes to:

http://www.codershangout.co.uk/search/new/%5BARG:2%20UNDEFINED%5D/

and it just ends up being a blank page. nothing loads on it.

Can someone help me please? I really need to get this sorted :)

i have tryed sorting it but no such luck.

[Almotmaiz.Net]

nice mod.
Installed and Arabic translation in attached.

Cheers

[Paul M]

..... i get this message when i try to click on the 'display undread posts' in certain usergroups, it doesnt seem to happen with mine, but the URL changes to:

http://www.codershangout.co.uk/search/new/%5BARG:2%20UNDEFINED%5D/

and it just ends up being a blank page. nothing loads on it.

Can someone help me please? I really need to get this sorted :)

i have tryed sorting it but no such luck.

This was a minor phrase error, I have just uploaded a fixed version.

[TalkVirginia]

Hey Paul,

Thanks for this mod. However I'm running into a slight issue which I just discovered today.

After I've logged into my site, I see where my site seems to think I have 1 or more unread postings, so I click on the link to show unread posts since I last longed in. When the page reloads, I get a white page and it acts as though it can't find the Cascading Style sheet settings. Under what would normally be the navbar, it says "No Users Matched Your Query".

I've already uninstalled the last few addons thinking they may be causing it but no luck.

I had your 3.7 version of this mod installed and it was doing the same thing so I just upgraded to the 3.8 version; however, still no luck.

Any thoughts?

[mikey1991]

Hi Paul, just to ask, how would I make it so that from my vBAdvanced portal wouldn't result in a 404 when the 'new posts' is clicked?

IE:

The forum is at mysite.com/forum and the vBAdvanced is at mysite.com and when someone clicks the 'new posts' button from the portal, it's looking for mysite.com/search.php when the correct path would be mysite.com/forum/search.php

So, What template\phrase do I need to edit for this to change to go to the correct place?

[Paul M]

I had your 3.7 version of this mod installed and it was doing the same thing so I just upgraded to the 3.8 version; however, still no luck.

Any thoughts?

No idea tbh, would need admin accss to see what was happening.



Hi Paul, just to ask, how would I make it so that from my vBAdvanced portal wouldn't result in a 404 when the 'new posts' is clicked?

IE:

The forum is at mysite.com/forum and the vBAdvanced is at mysite.com and when someone clicks the 'new posts' button from the portal, it's looking for mysite.com/search.php when the correct path would be mysite.com/forum/search.php

So, What template\phrase do I need to edit for this to change to go to the correct place?

Edit the Links Path setting in the options.

[TalkVirginia]

No idea tbh, would need admin accss to see what was happening.

No worries. It wasn't your addon that caused the issue. My bad.. ;)

[Stormraven]

Thankyou paul, everything seems to be working fine now :)

[greenspan]

I installed this module. Thanks.

[mikey1991]

Thanks Paul, Helped alot.. wasn't too sure what to do with that feature.

[lowey]

Is there a way to disable the automatic insertion of the unread-messages-link into the welcomebox?

I want to place it somehwere else and I tried placing $unread in combination with the Disable Unread Posts Display-setting. But this also renders the variable useless. Any clues?

Thanks! :)

Edit: OK, found it in the Unread Posts and Reputation (2)-plugin. Thanks anyway! :D

[arena]

Unread post not working help me please? New Reputation working

[Paul M]

Help you how ?

[EagleNick]

I have the options set to "Count All Posts Marked as Unread"
I have the issue with the link taking me to this: mysite.com/forums/search.php?do=getnew[ARG:2%20UNDEFINED].

I read about something with the dup_posts phrase, but I don't see anything wrong with it... this is what it is: You Have <strong>{1} <a href="{3}search.php?do=getnew">Unread {2}</a></strong>What else could be the problem?

Argument 2 of that phrase is another phrase that is part of this product - the only possible way you could get it is if vbulletin didnt import the phrases properly, or you have somehow deleted the phrase - uninstalling and re-installing might fix that, otherwise, still no idea.

Okay, uninstalling and re-installing got rid of this ARG UNDEFINED issue...

But now I have a new problem: Rather than the welcome box saying how many unread posts I have, it says "Display Unread Posts" where the Unread Posts part is the link to the getnew page.

All of the phrases are un-modified. Any idea how to fix this?

Thanks. I love this mod and hope to get it working properly ;)

[Paul M]

See the "Maximum Cutoff Limit" setting in the options ;

Sets the maximum number of days that posts will be counted for, if the cutoff exceeds this then just an unread posts link will be displayed. This can save running large sql queries if members have not visited in a long time. Set to zero to disable this feature.

[EagleNick]

See the "Maximum Cutoff Limit" setting in the options ;
Thanks; that was it.

[arena]

Help you how ?
Unread post not working

You Have <strong>{1} <a href="{3}search.php?do=getnew">Unread {2}</a></strong>

[Paul M]

Sorry, but what help exactly do you want ?

I cannot just magically tell you what is wrong.

I assume you have read/followed all the notes ?

[TheeMadame]

Installed easy.
Like this one very much, TY. :up:

[jgommel]

There seems to be some sorta conflict between Photopost vBGallery and this mod. With this mod enabled, my users can no longer use the Prev and Next image button/links within Photopost vBGallery. They keep getting this message, "No Image specified. If you followed a valid link, please notify the administrator". I disabled all my hook by placing the following code at the top of the vBulletin config.php file; define('DISABLE_HOOKS', true);

I confirmed that the issue was with one of my installed mods, so I systematically disabled one mod at a time until I found out that this mod is causing the Prev / Next image links to break.

Any ideas?

[Paul M]

Sorry, no idea, I dont have or use Photopost.

[jgommel]

Sorry, no idea, I dont have or use Photopost.

If your interested, I could give you access to the site in order to work this out? My user's really like this mod. I haven't found any other mod like this (that worked so well). Thanks in advance.

[Paul M]

Feel free to PM me access details, I'll look sometime this week if I get chance.

[Kolbi]

I can´t find:
vBulletin Options > General Settings > Thread/Forum Read Marking Type
Can you explain me what the "Thread/Forum Read Marking Type" includes? Because I have a German version...

[arena]

Sorry, but what help exactly do you want ?

I cannot just magically tell you what is wrong.

I assume you have read/followed all the notes ?


Unread post not to count

[Paul M]

I can?t find:
vBulletin Options > General Settings > Thread/Forum Read Marking Type
Can you explain me what the "Thread/Forum Read Marking Type" includes? Because I have a German version...
I have no idea what the German translation would be, but its a standard vb setting, so it must be there.

[Kolbi]

What can you change in these settings?

[islamicvd]

Hi there...

Well, After I upgraded my forum version from 3.7 to 3.8, I've got problems with this feature. It wasn't showing the forum page properly.

Now I have installed the newest version of this hack for 3.8 VB release but I still have problem.
Namely, when I click the '#number unread posts/comments' I'm redirected to URL: http://myforum.org/forum/search.php?do=getnew[ARG:4%20UNDEFINED] - and it shows blank page.

So, I think I've missed something or... Can you please help me.

Thank you in Advance!

[Paul M]

You have customised the phrases at some point, you need to revert them.

[islamicvd]

Which phrases? Can you give me an example please.

Thanks

[gator777]

There seems to be some sorta conflict between Photopost vBGallery and this mod. With this mod enabled, my users can no longer use the Prev and Next image button/links within Photopost vBGallery. They keep getting this message, "No Image specified. If you followed a valid link, please notify the administrator". I disabled all my hook by placing the following code at the top of the vBulletin config.php file; define('DISABLE_HOOKS', true);

I confirmed that the issue was with one of my installed mods, so I systematically disabled one mod at a time until I found out that this mod is causing the Prev / Next image links to break.

Any ideas?
Nice find, as I am having the same problem as you. :)

[EagleNick]

Where can I modify the link that clicking "Unread Posts" takes you to, as when I am in my vBAdvanced Links Direcotry, the target of this link is http://www.adminaddict.com/directory/search.php?do=getnew instead of directory being replaced with forum.

[Paul M]

Set the "Links Prefix Path" .

[EagleNick]

This doesn't resolve my issue.

With the Links Prefix Path left blank, here is the scenario:
When viewing the forum, the Unread Posts link takes you to: http://www.adminaddict.com/forum/search.php?do=getnew - which is exactly what it should be.

When viewing the directory, the Unread Posts link takes you to: http://www.adminaddict.com/directory/search.php?do=getnew - which is not a valid URL.

I'm assuming the reason is because the Unread Posts link is coded as <a href="search.php?do=getnew"> rather than <a href="BBURL/search.php?do=getnew">. So I'd like to know how to fix this.

Thanks.

[Paul M]

I just told you how to fix it.

[Sunka]

Set the "Links Prefix Path" .

This doesn't resolve my issue.

I'm assuming the reason is because the Unread Posts link is coded as <a href="search.php?do=getnew"> rather than <a href="BBURL/search.php?do=getnew">. So I'd like to know how to fix this.

Thanks.

I just told you how to fix it.


Paul, it would not kill you to answer just a little more.

EagleNick, if your forum is installed in folder named forum, try to write in field Links Prefix Path: /forum/

[Paul M]

The option description says it all.

Links Prefix Path

The path that will prefix search.php or usercp.php in the links, if you use a CMS then you may need to set this to something like /pathtoforum/ - otherwise just leave this blank.

As far as I can see from the reply he didnt even look or try it.

[Sunka]

Yes, but many people are new to all that stuff, I am too. So, explanation in details stop more posts with same questions. I not meaning anything bad...

[Metal-R-US]

There seems to be some sorta conflict between Photopost vBGallery and this mod. With this mod enabled, my users can no longer use the Prev and Next image button/links within Photopost vBGallery. They keep getting this message, "No Image specified. If you followed a valid link, please notify the administrator". I disabled all my hook by placing the following code at the top of the vBulletin config.php file; define('DISABLE_HOOKS', true);

I confirmed that the issue was with one of my installed mods, so I systematically disabled one mod at a time until I found out that this mod is causing the Prev / Next image links to break.

Any ideas?Any update on this? I've run into the same issue since upgrading to vB 3.8 and vBG 2.5.

[Paul M]

Nope. As I said before, I dont have or use Photopost, therefore there is nothing I can look at.

[Metal-R-US]

Nevermind, I found a fix at the Photopost forums...

[Paul M]

How about sharing it then ?

[cagbaazee]

Hi Paul , i hv install it . But where shuld i find it - unread post. It was not in index page. can u please guide .. what is wrong with it. Thanks

[Metal-R-US]

How about sharing it then ?From the Photopost vBGallery site:
Line 137 in showimage.php delete the code in bold

// Previous link, Next link, Filmstrip
if ($goto == 'next' OR $goto == 'previous' OR $ppg_options['gallery_filmstrip'])
{

if ($userid)
{
$wherequery[] = 'userid = ' . $userid;
}

[visitangeles]

is it possible to put the number of unread posts per forum in the forumhomedisplay area kind of like how UBB Threads works?

basically put each line or each forum would have a the total number of threads then the new unread threads would be in ( number_of_unread_threads ) and then the posts line like in ( number_of_unread_posts) next to the number of posts total

can you do that with your mod?

like getnew x and some code for the forum or whatever?

[Paul M]

No, thats not possible with this mod.

[kevcj]

Wonderful modification, thank you Paul.

I do have one question though - Setting the cut off date to less then 10 days makes the number of unread post disappear. All it says is "Display Unread Posts". Am I missing something?

[Paul M]

At a guess, you are using the "Count All Posts Marked as Unread" option, and your "Database Read Marking Limit" is 10 days - the "cutoff" must always be higher than the DRML in the Display All mode.

[kevcj]

At a guess, you are using the "Count All Posts Marked as Unread" option, and your "Database Read Marking Limit" is 10 days - the "cutoff" must always be higher than the DRML in the Display All mode.

Thank you, that fixed it. Now it says 8359 Unread Posts instead of 16,600+

[MjrNuT]

Paul,

I'm not sure if my question is in the right place, but I have this mod of yours as well as the Extended Rep Checks. I specifically like this mod for the UnRead Posts. My question is about the Reputation part now.

I have set it such that giving + rep. requires a comment. Is it possible to NOT display WHOM it came from? Of course admins could see from ACP, but I'm referring to the UserCP.

Thanks in advance.

[Paul M]

Displaying who gave a comment is a usergroup setting (standard vb).

[Sunka]

Paul, is it possible to alter MOD for new picture comments (not only for my pictures, but for all users pictures)?

[Paul M]

Sorry, I have no plans to make any further changes to any of my mods for the 3.x series of vbulletin (except bug fixes).

[smooth-c]

Is there a way to have these off by default?

[Oblivion Knight]

Just an observation, shouldn't the query on usercp_start have some kind of condition to check whether or not the reputation system is enabled.? Somewhat of an unnecessary additional query if not.. ;)

[Paul M]

Yes, That sounds sensible. :)

Im not going to release an update just for that, as its very minor, but Ive updated my master copy so it will be included in the next release (which will prob be vb4).

[smooth-c]

Is there a way to have these off by default?

[Paul M]

Sorry, dont really understand what your asking.

[Fulla]

Hi Paul, thx alot for the mod, been using it for a while :)

I've came across a problem lately, since I installed VBAdvanced adding a front page. The links on front page won't work, they link to a wrong address.

Main Page: www.gamingcraft.net
Forums: www.gamingcraft.net/forum

Clicking New Posts on Main Page, trys to redirect to http://www.gamingcraft.net/search.php?do=getnew (Without the /forum included).

Is there a way I can edit it to forcefully include /forum?
(Same for new reputation).

[Paul M]

Use the links path setting in the mods options.

[wAnBoA]

Thanks for the mod, Paul M.
Do you think it's possible to have an option so that we can set the forums we want to be included?
It would be useful if we only want a few forums to be included instead of the exclude option.

[Paul M]

Sorry, that wont happen in this version.

If I have the time I may think about it when its upgraded for vb4.

[Quantnet]

Will there be an option to show unread blog entry as well?

[Paul M]

I cannot answer that until we see how v4 works, but unlikely for the moment, I dont actually use the blogs.

[Chy]

Thanks installed.

[Chy]

Any idea how to get the link to work with Vba CMPS, the link goes to "link not found" on my homepage. It's fine in the forums area though.

[wrang]

I found a error?
When i click on the link this came up in the adressbar
/forumet/\"search.php?do=getnew\"

and the side
Not Found
The requested URL /forumet/\"search.php was not found on this server.

What do i have done wrong

Edit I found it my mistake at the dup_posts texts

[greenspan]

Any idea how to get the link to work with Vba CMPS, the link goes to "link not found" on my homepage. It's fine in the forums area though.
As Paul mentioned above, you can "use the links path setting in the mods options."

Go to: vBulletin Options>Display Unread Posts and Reputation. In Links Prefix Path, put something like: "http://www.yousite.com/forums/" since search.php is in there.

[Paul M]

As Paul mentioned above, you can "use the links path setting in the mods options."

Go to: vBulletin Options>Display Unread Posts and Reputation. In Links Prefix Path, put something like: "http://www.yousite.com/forums/" since search.php is in there.

You should only need the /forums/ part.

[Freesteyelz]

Thanks for releasing a useful mod, Paul. :)

I'm curious if there's a way the script can look for "<!-- unread posts -->" instead of (where highlighted in red):


$vbphrase['welcome_x_link_y'] .= '</strong><br />'.$unread.'<strong>'; // 3.7 Onwards Phrase




When I replace the red with "<!-- unread posts -->" it gave me a parse error. :o As a resolve I either removed $unread (in blue) or removed the red (shown below):


'</strong><br />'.$unread.'<strong>'; // 3.7 Onwards Phrase
"<!-- PEMDATA38: {$data_dup['title']} : Version = {$data_dup['version']} : Revision = {$data_dup['cvs']} -->";



The mod seems to work when either edit was applied. Is that ok or is there a more efficient way of doing it?

[Paul M]

Sorry, Im not following what your trying to do (or why ?).

FYI, It doesnt look for anything, it appends itself to the relevant phrase.

[Freesteyelz]

FYI, It doesnt look for anything, it appends itself to the relevant phrase.

In your previous version there was a section in vB Options to specify the area which Unread Post codes would attach to using ATCS (Automatic Template Changes System). I wanted to do that with this version since my navbar is modified.

I've successfully moved $unread so the mod will display where I want it to (and not after last visited phrase) by commenting out those lines of codes. I was just wondering if by commenting out those lines of codes (below) would harm vB or the codes in any way:


// $vbphrase['welcome_x'] .= '</strong><br />'.$unread.'<strong>'; // 3.6 Phrase
// $vbphrase['welcome_x_link_y'] .= '</strong><br />'.$unread.'<strong>'; // 3.7 Onwards Phrase
// $vbphrase['last_visited_x_at_y'] .= "<!-- PEMDATA38: {$data_dup['title']} : Version = {$data_dup['version']} : Revision = {$data_dup['cvs']} -->";



:)

[Saviour]

Nice mod, Paul...thanks!

[Paul M]

In your previous version there was a section in vB Options to specify the area which Unread Post codes would attach to using ATCS (Automatic Template Changes System). I wanted to do that with this version since my navbar is modified. That was only in a couple of the 3.6 versions in mid 2007, for the last two years (since v1.22) it has used the phrase system.

I've successfully moved $unread so the mod will display where I want it to (and not after last visited phrase) by commenting out those lines of codes. I was just wondering if by commenting out those lines of codes (below) would harm vB or the codes in any way:
Nope, commenting them out will not affect anything else.

[Freesteyelz]

Oh. I've been using an older version (1.21) all this time. :o Thanks, Paul, for the assurance. :)

[K4GAP]

Is there a way to make this display "Unread Posts" as it does here on this site? (top right)

[akanevsky]

Version 3.8.001 adds support for forums excluded if you have the "Get New/Get Daily Opt Out Modification" installed (by Andreas).

Hey,

Can you please also add support for my modification of Andreas's hack, which is "Selective Forum Filter"?

Thanks.

[Paul M]

@ Psionic Vision, Please try the attached with your mod before I release it.

[yamahapaul]

Paul-

My older, pre updated version is working fine on 3.8.4 with no issues, is there anything to be gained by updating? I know it may sound a daft question but I'm a firm believer in if it aint broke etc.... :o

[Paul M]

What version exactly are you using ?

[yamahapaul]

What version exactly are you using ?

No idea and the original xml got deleted when I had to reformat my laptop, I guess it is the one before the current one.. :o

[nascartr]

@ Psionic Vision, Please try the attached with your mod before I release it.


I'll go ahead and update that I gave this a try and it seems to work. I tested it on one forum I chose to exclude, made a post with my test account in that excluded forum, checked back on my normal account and the unread post wasn't showing in the navbar. I went back into my options and reset the exclusion list and then the unread post showed up like it should have originally before exclusion.

I'm going to keep using the version attached because I can't tell that it doesn't work with Psionic Vision's mod.

[nomoreturn]

Nice mod thanks

[Paul M]

No idea and the original xml got deleted when I had to reformat my laptop, I guess it is the one before the current one.. :o
Just check the version number in your ACP. :)

I'll go ahead and update that I gave this a try and it seems to work. I tested it on one forum I chose to exclude, made a post with my test account in that excluded forum, checked back on my normal account and the unread post wasn't showing in the navbar. I went back into my options and reset the exclusion list and then the unread post showed up like it should have originally before exclusion.

I'm going to keep using the version attached because I can't tell that it doesn't work with Psionic Vision's mod.
Thanks for confirming it works, I'll release it as the main version.

[K4GAP]

Is there a way to make this display "Unread Posts" as it does here on this site? (top right)

Yes? No? You're working on it? Or is this the wrong mod to achieve what I'm trying to do?

[nascartr]

Yes? No? You're working on it? Or is this the wrong mod to achieve what I'm trying to do?


Not really hard to install and see if it's what you want but I've provided a screenshot for you to see what it does. It's not exactly 100% a mirror copy of the one on this site but work with the phrases and if you want a 100% exact mirror copy of the way the one on here is then you could achieve that...

[K4GAP]

Not really hard to install and see if it's what you want but I've provided a screenshot for you to see what it does. It's not exactly 100% a mirror copy of the one on this site but work with the phrases and if you want a 100% exact mirror copy of the way the one on here is then you could achieve that...
Thanks for sharing. I had it installed but could not get it to display in that area. I'm still trying. Is there anything you can share that would help me?

[nascartr]

It's supposed to be up there by default. Maybe you have modified your navbar template and accidently removed that hook? Have a link to your site?

[K4GAP]

It's supposed to be up there by default. Maybe you have modified your navbar template and accidently removed that hook? Have a link to your site?


In the vb options I had "Thread/Forum Read Marking Type" on Inactivity/Cookie Based. I changed it to Database (automatic forum marking) and now it's working! Thanks so much for the help.

Gary
Public Warriors - Outdoors & More
(http://www.publicwarriors.com/)

[nascartr]

I see that it works! Great! Just registered on your site.

[K4GAP]

I see that it works! Great! Just registered on your site.

Thanks for the help. This is exactly what I wanted. And thanks for registering and checking it out.

Go Dale Jr. :cool:

[yamahapaul]

Just check the version number in your ACP. :)



doh! 3.8.002 :o

[Paul M]

There are a couple of minor bugs in that version, so yes, for the sake of 30 seconds, I would suggest you update to 3.8.004.

[paintballer.ie]

thanks for the update. The forum filter one is a nice fix.

I have one bug that affects vba links.

I have it installed in /forum root/links

I have to make sure that all links in my header drop down menu began with a '/' or else when clicking on them from the links section would have them wrong e.g. ./links/help and /links/mail

I have them all fixed except with the 'unread post' links. It is giving me http://www.paintballer.ie/links/search.php?do=getnew

Is this a phrase fix or a template..... I think all I need to do is add a '/' some where.

[Paul M]

Not entirely following you, but have you set the links path option ?

[paintballer.ie]

Not entirely following you, but have you set the links path option ?

Cool, that worked. I just added a '/' in the 'Links Prefix Path'. I dono why I never though of looking there.

Thanks again. Keep up the great work.

[cagbaazee]

why i cannot see unread message and where it is located at . please help me to resolve this
problem. Treat it most urgent

[MjrNuT]

Paul,

I scoured your thread all the way back to page 4. I probably still missed it if someone else asked it. Sorry if this might not make sense, but how about a UserCp control such that users may choose to Turn off the Display X Unread Posts at the upper right? Then their post/thread marking defaults to vB settings, which is vBulletin Options > General Settings > Thread/Forum Read Marking Type
.

Reasoning for this question, I think, is that I have set the mods cutoff to be 7 days and the vB setting to like 12 days. This still results in quite a few Unread for a user and I was just thinking of relieving them for a user's activity that is sparse.

Our board is by far not big, but even a couple days and ppl have like 100 unread.

If someone has a good mitigation to this, then please do share it. Whether it be using the provided setting options of Paul's mod or other.

Thanks in advance.

[Stormraven]

What I'm looking for is the whole code, or phrase to put the info ie, 'No Unread Posts since your last visit.' i need the code that generates that so I can past it somewhere else on my site because I would like it in another one of the boxes and I'm having trouble finding that part of the code of phrase, can someone help me please? :(

[Stormraven]

Anyone?

[Paul M]

Assuming i understand your question, there is nothing you can just put elsewhere.

[Stormraven]

But what is the code to place it elsewhere, there must be a phrase or soemthing.

[Osama11]

i have installed that product .. but its not working 4 me ..
do i have to add any codes ??

[Paul M]

What isnt working ?

Did you read all the notes ?

[Osama11]

What isnt working ?

Did you read all the notes ?

it does not show new post in welcome box..

is there any hack which can work on Inactivity/Cookie Based
i have vbulletin 3.8.1

n wht does database thread marking system mean?

[Stormraven]

paul what is the phrase to place it elsewhere? there must be a phrase :( please paul.

[Paul M]

paul what is the phrase to place it elsewhere? there must be a phrase :( please paul.
Try using $unread, I believe it should work.

is there any hack which can work on Inactivity/Cookie Based
i have vbulletin 3.8.1
Nope.

n wht does database thread marking system mean?
ACP > vBulletin Options > General Settings > Thread/Forum Read Marking Type > Database (automatic forum marking).

[theparentpack]

I have a notification showing on the Your Notifications link. When I click the link or the drop down arrow nothing happens. Help! What should I do to get this functioning? I look forward to your response.

[z0diac]

Is there a version of this for 3.7.4 ? I can't seem to find it, but I had it installed on 3.7.4 before.

EDIT: found it. 'Changed my search string and it came up. 'Weird the version for 3.8 and 3.6 don't work with 3.7x, but I got the 3.7x version of this mod and it seems to be working again. Cheers.

[Paul M]

I have a notification showing on the Your Notifications link. When I click the link or the drop down arrow nothing happens. Help! What should I do to get this functioning? I look forward to your response.
There is nothing you should have to do. If your notifications are broken then you probably have a faulty style or something. Try it on the default vb style.

[Quantnet]

Paul,
any comment on if this mod cause slow queries or server load spike?

[Paul M]

No, it doesnt.

[KURTZ]

hi Paul, i've a trouble with this hack: https://vborg.vbsupport.ru/showthread.php?t=217771

check the pick:

https://vborg.vbsupport.ru/ (http://img10.imageshack.us/img10/860/pick01sep161222.gif)

can you fix this trouble?

[CPOWA]

Been using this product for many moons...

Today, I stumbled upon an error, hence I don't know how long it has existed.

I happened to roll my mouse over the "Unread Posts" link (of which there were none) in the welcome box and noticed the following error message on my browser status line:

http://www.usfcralliance.org/forums/search.php?do=getnew[ARG:2 UNDEFINED]

If I click the Unread Posts link I get a white page and "Done" message in the status bar.

This forum is using several of Cyb's products, ry215's sidebar column, and this product. The only other customizations I've made are in the header, footer, navbar, and (one within ry215's sidebar product).

I was using the prior release 3.8.003. So I upgraded to current release this AM, reverted the navbar template, based on a warning in the instructions, and the error is still occuring.

I'm running vb 3.8.3. I get the error in all of my styles, including the Default style.

Any ideas?

BTW, the "New Posts" link in the navbar is working.

Nita

[Paul M]

You have customised (translated) one of the phrases at sometime in the past, you need to delete (or update) the custom version.

[Paul M]

hi Paul, i've a trouble with this hack: https://vborg.vbsupport.ru/showthread.php?t=217771

check the pick:

http://img10.imageshack.us/img10/860/pick01sep161222.th.gif (http://img10.imageshack.us/img10/860/pick01sep161222.gif)

can you fix this trouble?
Your picture is far too small, I cant see anything at all in it.

[KURTZ]

Your picture is far too small, I cant see anything at all in it.

[IMG=http://img29.imageshack.us/img29/5154/fnivfederazioneitaliana.th.jpg] (http://img29.imageshack.us/img29/5154/fnivfederazioneitaliana.jpg)

check now ...

[CPOWA]

You have customised (translated) one of the phrases at sometime in the past, you need to delete (or update) the custom version.

Hi Paul,

Sorry to bug you again, but I can't find any phrases that I?ve modified which would affect this product. Are their any phrases I should be looking at in particular?

I know the mod works and always has. Just as a cross check, I reinstalled 3.8.3 into my localhost, loaded this mod, and it works fine!

EDIT: Another thing I noticed is that the mod works IF there are New Posts.

Nita

EDIT: Problem solved. There were indeed modified phrases. I thought uninstalling the product and reinstalling would have gotten rid of them. Apparently that's not the case. :o

[Trek]

Hey Paul,

I've been using this mod since you released it for 3.8. It's working great. I've also been using the Selective Forum Filter mod as well, but had it disabled. I read in this thread that your latest version uses that mod's forums exclusions.

I've updated to your latest version (The Selective Forum Filter mod hasn't been updated since release), so I have the latest versions of each.

The problem I'm having is the exclusions don't seem to be working. I can verify that the forums are excluded (as they don't show up at all), but when new posts are made, they are still added to the unread counter and are visible when clicking the unread posts link.

It's entirely possible I'm doing something wrong, so please let me know. vB 3.8 BTW.

[Trek]

Nevermind, I have it working.

After echoing out the excluded forums variable to make sure it was populated, I realized my mistake.

I had selected a category to be excluded, thinking it would exclude all of the sub forums under it. So of course, I'd see all of the posts as unread, it was a category. Once I selected all of the forums under it, things were excluded as expected.

Thanks again and sorry about that!

[RedHacker]

It very nice and worked. It is easy to enter new posts and new thread and down from Private messages....?

[RedHacker]

How to change color numbers to unread posts with bold and color RED....?

[Paul M]

Edit the phrases to add html to colour the text as desired.

[hyppa]

Nice, but it looks like i cant get the It to displays the number of new reputation comments given. ?

[Paul M]

Can you be more specific please, not really sure what your problem is.

[RedHacker]

Edit the phrases to add html to colour the text as desired.

You can say to me precisely what I change not I make some error and him I destroy??

[SticKer13]

Downloaded and installed the mod. Works perfectly on my forum.

Thank you Paul.

[RedHacker]

In searching phrases put "UnRead Posts" but must put "UnRead" thanks Paul M for this mod.

[MagicThemeParks]

Imported product and it worked perfectly without a hitch! Thanks Paul :up:

[Wonksta]

Hi Paul M

Having a little trouble. I have installed this and love it. However this Unread link does not work when the user visits the Gallery. I am running PhotoPhost Gallery in another directory outside of /forum/ so when a user clicks 'unread posts' while in the gallery it tried to load

/gallery/search.php?do=getnew

how can i edit the mod so it always uses /forum/search.php?do=getnew
?
Thanks

[Paul M]

Simply set the path option provided.

[Wonksta]

Simply set the path option provided.

Argh I'm such an idiot! Thanks mate.

[KURTZ]

hi Paul, news about my trouble? :)

[Paul M]

Please explain what your trouble is.

[Eq4bits]

Will this be ported to work with 4.0/Suite 4.0? Perhaps a bit premature, but I have a decision to make in the next 2 weeks and this mod is a *must* for my members.

[Paul M]

Most likely yes. I dont know when tho.

[Eq4bits]

Thank you for the info. I knew it would be a while considering 4.0 isn't out of beta yet. Just wanted to be sure before I committed my first born to upgrade to the 4.0 suite before it's even demo'd ;)

[Deimos]

By default, does this plugin show on every forum page? (main page, forum view, thread view etc?)
I've used this plugin for ages (And love it btw) but I can't remember whether it's supposed to show only on the main page.

[Paul M]

All pages, its part of the navbar.

[Pessimist]

Paul M
Thank you, great mod!

One question.
Which (and were) variable schould I add, if I have custom style and my navbar code is im header template?

[Dj Smuggla]

Great mod Paul, the only thing is when i get a new reputation comment or my post gets thanked, in the box that pops up, it dosent say: You have 1 new Reputation Comment.

Its just blank, here's a screen shot:
https://vborg.vbsupport.ru/external/2009/10/28.jpg

Can this be fixed m8...

[Paul M]

I cant view that screenshot at work, I'll try and look tonight if I get chance, otherwise im away for a week, so it will be a while before i see this.

[Dj Smuggla]

Thanks for taking the time to take a look m8, but for sum reason its working fine now...
I haven't changed anything, it must of taken a while for the phrase to set or somthing...

[Skydiver10]

Sweet!! Nice hack.....Installed!...thank you!:)

[theparentpack]

I have 4 sites, and it works on three of them. Three of the sites are all the same, and use the same style. It is still not working. Any ideas?



I have a notification showing on the Your Notifications link. When I click the link or the drop down arrow nothing happens. Help! What should I do to get this functioning? I look forward to your response.

There is nothing you should have to do. If your notifications are broken then you probably have a faulty style or something. Try it on the default vb style.

[Paul M]

I have 4 sites, and it works on three of them. Three of the sites are all the same, and use the same style. It is still not working. Any ideas?
Work out what is different on the one that doesnt work. Code does not randomly decide not to work, so something is not the same.

I am away for a week in a few hours so wont see any reply until I return.

[brookelyn]

Unless you have modified your navbar template, you dont need to worry about the rest.

hello. i have searched through this thread but can't seem to find a clear answer to this dilemma. i have a slightly modified navbar so the simple install does not display the link to unread posts and reputations. what do i need to add to the navbar template or what else would i need to do to enable this to display properly in the navbar?

i look forward to your response and getting this working on my forum ASAP!

[Paul M]

The unread posts message is appended to the Welcome, XXXX. message, if you are not displaying that phrase, then you will not get the unread message.

[trick2008]

Cant wait till this is ported over to 4.0 Paul!

[milaszewski]

yes, the unread posts count is one of the most important features missing in vB4

[Whity]

Is it possible to make the "mark all readen" button inside the "show new posts" page?

[Paul M]

Mark all Read is in Quick Links (all pages), thats standard vbulletin.

[al_rhar]

Working fine on 3.8.4 PL2, thanks very much :)

[smooth-c]

Any way to have an on/off option in the UserCP? Some of my members like this and some don't. Thank you :)

[mgurain]

Hi Paul,
It didn't show up! is it because there (0 unread posts since my last visit) or what ?
Thanks,,

[Paul M]

Any way to have an on/off option in the UserCP? Some of my members like this and some don't. Thank you :)
If you set this up yourself with user profile fields and template conditionals then yes, you could do it. Its not something I will ever add tho.

Hi Paul,
It didn't show up! is it because there (0 unread posts since my last visit) or what ?
Thanks,,
Nope, it will show whether you have unread posts or not.

[rainyleaves]

Awesome. Thanks Paul.

[RobbieZ]

Is the mod tied to both unread posts and reputation comments?

Or can it be separated to only have reputation comments notification?

[Paul M]

You can turn off either

[FIM]

nice hack

[goshalim]

Hi ,

Iam have a small problem

Its not working for me , accually it stoped working.

when i click on the unreaded post it shows a black page.

and also as you can see it shows after get new /forum/search.php?do=getnew[ARG:4%20UNDEFINED]

If i remove the [ARG:4%20UNDEFINED] from the end , its working ,

Please someone helps me to make it works.

Thanks

[Paul M]

That means you have an old translation of one of mod phrases - you need to locate and delete (or update) it [it could be one of several, all start with dup_ ].

[theparentpack]

I have moved my forum to a NEW domain. Now when I click on the Unread posts link it takes me to the old domain. What do I need to change to correct this issue?

Nevermind, found it!

[Been Told]

I have a little problem:
I've moved my forum to a different server in a different time zone. Since then the "unread posts" has been displaying wrong (too low) numbers. Do I need to reset something?

[jscieza]

Hello Paul,

First of all I'm very sorry for the off topic but I have just read (https://vborg.vbsupport.ru/showpost.php?p=2049429&postcount=1990) that I can use your hack to get notifications when I receive one or more "post thank you(s)" and I'd like to know if that's true. If this isn't true then may I ask you if there is any chance to see something like this in your first post in the near future? "Version 3.8.005 adds support for the "Post Thank You Modification" (by Abe1)." :D

Thank you,
Jonathan

[Paul M]

Hello Paul,

First of all I'm very sorry for the off topic but I have just read (https://vborg.vbsupport.ru/showpost.php?p=2049429&postcount=1990) that I can use your hack to get notifications when I receive one or more "post thank you(s)" and I'd like to know if that's true.
I have no idea if its true, there is no specific code for it.

[jscieza]

You forgot this:

then may I ask you if there is any chance to see something like this in your first post in the near future? "Version 3.8.005 adds support for the "Post Thank You Modification (by Abe1)." :D

[Paul M]

You forgot this:
No, I didnt ;)


Nothing new is going to be added to this. Sorry.

[Morrus]

This is a silly question, probably.

Clicking on a reputation notification takes me to usercp.php. There is no section mentioning reputation there. Does that require another mod, or have I somehow disabled the display?

[Paul M]

You have somehow disabled the display.

[Alfa1]

Does this addon allow me to add new reputation count to the 'your notifications' drop down?
Is it possible to not display 'Unread posts' ?

Thanks.

[Paul M]

The answer to both is in the main post ;)

[Morrus]

You have somehow disabled the display.

Apparently so. I have it on the profile page, though. What template is the destination URL on, so that I can edit it to point at the profile instead?

[Morrus]

I just did a search in templates and phrases and couldn't find the reference.