iTrader 2.1.0 (Interim Release)

[eoc_Jason]

To hold people over until I get the full updated version with new features released, I'm posting this Interim version that has been tested / updated for vBulletin 3.7.x

There are no new features in this release, it is simply compatability updates and minor bug fixes. There are changes to both files & templates, but no changes to the iTrader tables.

--------------------

iTrader - A user feedback add-on for vBulletin 3.7.x
Copyright ?2004-2008 Jason Rabel, All Rights Reserved.
__________________________________
Latest iTrader Verson: 2.1.0
vB Versions Supported: 3.7.x
Author: Jason Rabel
Contact: PM me here.
Site: EXTREME Overclocking (http://www.extremeoverclocking.com/)
??????????????????????????????????
Description:
iTrader for vBulletin has evolved from Trader Ratings for vB 3.0.x which evolved from Buy/Sell/Trade User Rating System for vB 2.x. This is a rating system for when members buy / sell / trade items from each other (presumably on a FS section of your forum). It is somewhat based on the honor system since there is no automatic way to truly tell if they did engage in a transaction. iTrader came about because it was a pain to try and maintain a single thread listing good / bad traders and so far has worked out quite well.

Features:

Rate another member: Positive / Negative / Neutral
Specify in each transaction: Buyer, Seller, or Trade
Leave multiple comments about the deal
Dates & IPs are all recorded to prevent abuse
Specify a thread URL to the deal
Advanced URL checking
Display ratings over time
Filter based on Buyer/Seller/Trade/or feedback they left for others
Users can edit/delete ratings left for others (time based limitation)
iTrader Admins can edit/delete anyone's ratings (just incase)
PM notification when new rating or comment is left
Per-usergroup permissions
Lots of admin controllable options


Installation / Upgrade Info:
Read the included readme file, it explains everything.

Standard Disclaimer:
BACKUP YOUR DATABASE & FILES BEFORE IMPLEMENTING THIS HACK!!!

Donations:
This add-on will always be free, however your donations are kindly accepted and will help towards further development. The link is on the right under "The Developer" info. :)

[Hasann]

nice update :)

[Darkstarproject]

Awesome!

However I am running it on a vb 3.7.1 board and it works fine. But I will update it when this is golden!

[yahoooh]

thanks and will be tested

[Silviu]

After upgrading to the interim release, the iTrader acts like it's turned off, even though the permissions have been correctly set and the hack is active. Users can view the trader feedback in the Member Info page (I'm using MagnetiCat's hack - https://vborg.vbsupport.ru/showthread.php?t=178158 ) but the system itself can't be used. It says that "The iTrader system is currently closed." even though it's turned on.

Bug?

Using vBulletin 3.7.1PL1

[dreads]

I am gonna click install :P

-> disable MagnetiCat's profile thing then retry :P

[haothiencz]

Rated and Installed, its possible to run this Mod which 3.6.x ver ?

[Rickeo]

Is it possible to disable negative and normal feedback ratings, see I want to modify this for my personal use so I can have like a Bebo love system on my site where people get to give 1 love a day to sum1.

I have done this before using the old itrader system but it was awhile ago and I can't remember what stopped me using it but yea anyway I don't wanna trash your thread so can you tell me if it's possible to limit the number of feedbacks a user is allowed to give in one day and if negative and normal feedback can be disabled leaving only posative?

Thanks

Rick

[eoc_Jason]

After upgrading to the interim release, the iTrader acts like it's turned off, even though the permissions have been correctly set and the hack is active.

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.

Is it possible to disable negative and normal feedback ratings?

Easiest way without modifying the code would be to just remove those options in the template where they input a rating.

[christian8a]

How do I upgrade on vb 3.7
On the instructions it doesnt say, except for vb 3.0 and 3.5, or wha tis it the same?

[Spinball]

Whoop! Good man.

[Spinball]

I was getting the same error - iTrader is Closed.
I followed your instructions above and iTrader version was set to 2 despite doing a correct install.
Changing it to 2.1.0 fixed the problem but I'm sure there is an error in the install somewhere.

[Silviu]

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.

I tried to upgrade again, used all the new files, overwrite on for the XML import, same deal. Activating the Debug mode is quite a hassle though due to the need to close the board, so I'll just patiently wait for the next version.

[eoc_Jason]

Hmm.. I'm looking at the XML file and it shows the setting group info is all correct. I don't know why it is not updating that field.

You don't *have* to close your board... It's just that way your members don't see all the pages with the debug info at the bottom... All you have to do is "close" it via the admincp option... I don't see what makes it so complicated.

How do I upgrade on vb 3.7

Same as previous versions... Upload the files into their respective places, then update via the XML file, being sure to "overwrite"...

[24hourForum.com]

i tested the rating system, how do i now delete a trader rating i left as test?

[vidan]

nice mod is it like the one in digitalpoint?

[gdogg2003]

Is it possible to install a Trade Manager to create and manage the trades?
Do you know an Add-On for a Trade Manager which works with iTrader?

[gwerzal]

sweet been waitin for this. Thanks

[CarterMarkham]

Nice, I've been waiting for this, Ill wait a little longer for a more final version!

[maidos]

how do i edit itrader link on member profile its very confusing instruction

[Tanpapasmurf]

Ive edited the templates and added the code but i still do-not see the itrader.

I added a link to the Navbar and i clicked it and it took me to MY itrader but when i go to a user profile i do not see Itrader and when i go to a thread i dont see anything relateing to itrader

Can someone help me with installing this into my templates?

[xxalexkimxx]

How can we show the iTrade in postit ? I just installed it, everything works fine, but only thing is that it doesn't show up iTrade: # in postit

[gdogg2003]

is it possible to put in some old feedbacks.
we had an old trade board with existing feedbacks.
is it possible to create some feedbacks without any feedback-threads?
so that the members have their old feedback status in the new board?

[anarki2009]

Thanks For this!! Loving it :up::D:up: works great on my site http://www.street-rodz.com

[SpeedJunkyz]

OK Im trying to install it, the instructions say Upload everything in the Upload folder including sub-folders....My question is where do I upload them to? I can do the XML transfer.

Help please!
SJ

[TimberFloorAu]

OK Im trying to install it, the instructions say Upload everything in the Upload folder including sub-folders....My question is where do I upload them to? I can do the XML transfer.


Help please!
SJ

Havent checked yet, but usually, open the upload folder, highlight all of the items, select copy.

Goto FTP, and in forum directory i.e. forum/ paste the contents.

Easypeasy

[SpeedJunkyz]

Yeah I don't have the joy of bulk FTP lol Im running off my one by one server upload lol..

But After I guessed(not sure it will work) I realize I can not use this.... Im 3.6.8 and it won't let me upload the XML says Im not 3.7 lol

SJ

[TimberFloorAu]

What a cracking mod.

Our members arent quite sure what to do, and how to do it. But its very sexy.

Like it a lot.

Thanks | Installed

[TimberFloorAu]

Yeah I don't have the joy of bulk FTP lol Im running off my one by one server upload lol..

But After I guessed(not sure it will work) I realize I can not use this.... Im 3.6.8 and it won't let me upload the XML says Im not 3.7 lol


SJ

Shame mate, its a very cool.

[SpeedJunkyz]

Timber could you help me with the older version which is supposed to be for mine I think?

What do you think?

https://vborg.vbsupport.ru/showthread.php?t=65730

Will that work for mine?

SJ

[Stubbed]

Good stuff :)

Out of interest, what has been updated for 3.7? I have 2.0.1 installed and working fine with 3.7 with a few minor hacks, is it worth upgrading to this version or waiting for your final release?

[Slingblade61]

Works fine for me.

Nice work!

[MadeJoyce]

Im running VB 3.6.8, which version should i use of your itrader.. Thankyou

[Shazz]

Great to see you alive jason :)

[Digital Jedi]

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.


I had the same problem with iTrader not opening. I did the edits you suggested in Debug Mode, but the version would continue to come up as 2. Took a chance and changed it to 2.1.0 right from the form field, without going into Edit, and it took care of the problem. Don't know what that means, or even if that was the smart thing to do, but in case it helps address the problem, figured I'd share. I'm on 3.7.1 PL2.

[OsideRida06]

I have the 2.0.1 installed on my 3.7 board and it works great. I have been looking for a mod like the Itrader Extension though. Is there anyway we can get something like implemented on this one? All of my traders always ask for a top Itraders list of some kind. Itrader is a key part of my forum so that would be really great if you could?

[OsideRida06]

I am putting this new button in my profiles. It is going to be linked to that persons Itrader page. But I cannot for the life of me figure out what to put to link in there. I have went through all the templates looking for all the different links and cannot figure it out.

I have got it to where there is a link but it goes to your own Itrader page. I need it to go to the Itrader page that the profile belongs to.

Does anyone know how I can do this? I would greatly appreciate the help.

[gamma626]

I am putting this new button in my profiles. It is going to be linked to that persons Itrader page. But I cannot for the life of me figure out what to put to link in there. I have went through all the templates looking for all the different links and cannot figure it out.

I have got it to where there is a link but it goes to your own Itrader page. I need it to go to the Itrader page that the profile belongs to.

Does anyone know how I can do this? I would greatly appreciate the help.

I have the same question - where is the itrader page? How do I find that to add feedback?

[Notical Mass]

Is it possible to make some sort of leaderboard that will show who has the highest itrader to the lowest itrader..?

[webcosmo]

Great. Installed it at http://www.webcosmoForums.com

But I am getting little problem showing the iTrader total on the member profile page.

Adding this line on the MEMBERINFO is not working, please suggest:
iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)

[OsideRida06]

I figured it out. I will post what you need to put here in a bit.

[Shazz]

Is it possible to make some sort of leaderboard that will show who has the highest itrader to the lowest itrader..?

I believe thats under devlopment :D

[Demo16]

no upgrade instructions?

[Demo16]

Same problem for me: The iTrader system is currently closed.

[xzorbix]

top stuff, just what i was looking for.
You can see a live demo on www.teenearners.com!

[callumbush]

Hi Jason,

Looks like a great mod! :)

Does it allow you to restrict the options so that only I can sell things?

The reason I ask is because I would really like to do that instead of simply using paypal buttons, as users will be able to see my feedback like on eBay, and have confidence in purchasing from me.

Cheers

Callum

[SqueakyJoe]

This is going to sound very noob, however, im new to vBulletin and dont know how it works, however, can someone tell me how to:

Edit all the usergroup permissions (all groups default to no access).

Thanks,

Matt

[OsideRida06]

Any update on when there will be top TR list? Something similar to the "iTrader Extension?"

[eoc_Jason]

Upgrading is just like the previous version (and any vB plugin)... You upload the files then upload the XML via the CP... Not complex...

is it possible to put in some old feedbacks. we had an old trade board with existing feedbacks. is it possible to create some feedbacks without any feedback-threads? so that the members have their old feedback status in the new board?

No, the system re-calculates out the scores in the user table every time a trade is done on their account. It's done because there are so many circumstances in creating/editing/deleting that trying to just pass the score and never recalc it would be a nightmare. Start everyone off at zero and they will build up a rating fast enough... I also do it to prevent overzelous admins or others from artifically boosting people's ratings.

Out of interest, what has been updated for 3.7? I have 2.0.1 installed and working fine with 3.7 with a few minor hacks, is it worth upgrading to this version or waiting for your final release?

Just minor little bug fixes related to the UI, but also the CSRF code has been implemented for vB 3.7.x compatability & security.

Someone else asked about installing on vB 3.6.x: You can remove the requirement for 3.7, but I do not know how it will respond to the extra variables with the CSRF code, other than that everything else is compatabile.

Our members arent quite sure what to do, and how to do it. But its very sexy.

It's like eBay... You complete a transaction between two people and they can rate each other to build up a reputation as a good trader (like eBay). It's based on the honor system to a certain extent. You can require they link a URL, and you can configure to only allow URLs from within certain forums, and one of the people in the trade have posted (or maybe created? I can't remember) that thread.

Edit all the usergroup permissions (all groups default to no access).

Go to your admincp -> usergroups -> usergroup manager -> Edit Usergroup (go through each of them and set permissions accordingly, it should be at the bottom of each page).

Any update on when there will be top TR list?

A "top trader" list is not on my list of priorities. There is really no point in having except for some person to sit there and stare at themself on the top of the list, it provides no functionality whatsoever... But I will get around to it when I get around to it... I'm also planning on adding other stats like "most ratings / rated within the past month" and stuff like that.

-------------------

If you have the problem with your forum being closed after you upgrade - Read Post #9 and #35

-------------------

As for an update, right now things are kind of on hold. I'm in the process of setting up my new server before I take it to the datacenter, hopefully first part of next week.

I'm trying to move all my websites off my current hosting company as fast as possible (because they have screwed me over one time too many). But there's a lot of custom stuff that has to be configured and installed, a major headache.

In the past couple weeks that has been where all my effort has been (which if they knew how to run their business properly I wouldn't be in this mess). First there was a major power outage, then I had to do a bunch of restores and repair work on the data because of corruption, then there has been ongoing DNS issues. They have pushed me over the edge in their horrible service so I'm jumping ship as fast as I can.

--------------

If you have read this far, then hopefully someone will reply to this comment:

What do you think about how eBay disallows sellers to leave negative feedback if a buyer gives them a negative? I was thinking about implementing a similar feature, so that if one user gives the other a negative, the other person couldn't retialite giving a negative too?

I've never actually had an instance where that has happened on my forum personally. Usually a member will dissapear after getting money from someone and so they leave a negative, but that member also ususally gets banned from the forum anyhow.

[Watson]

Hi,

I did have it previously running, but when I uninstalled it looks like its left the tables. This is good as I have my data still, however when I run the XML file I get the below error.

Database error in vBulletin 3.7.1:

Invalid SQL:
CREATE TABLE itrader (
rateid int(10) unsigned NOT NULL auto_increment,
userid int(10) unsigned NOT NULL default '0',
rateduserid int(10) unsigned NOT NULL default '0',
rating tinyint(3) NOT NULL default '0',
buyselltrade tinyint(3) unsigned NOT NULL default '0',
subject varchar(80) NOT NULL default '',
dealurl varchar(255) NOT NULL default '',
dateline int(10) unsigned NOT NULL default '0',
ipaddress varchar(15) NOT NULL default '',
PRIMARY KEY (userid,rateid),
UNIQUE KEY rateduserid (rateduserid,rateid),
KEY rateid (rateid)
) TYPE=MyISAM AUTO_INCREMENT=1;

MySQL Error : Table 'itrader' already exists

Also when I try and do it via the upgrade file, I get an error telling me tables don't exist. Any help is appreciated.

Cheers

Watson

[dr.science]

Ok... so how do I enabve debug mode? Searches on here, vbulletin.com, looking through the config file, and through vbulletin admincp brought me here... I can't find this anywhere.

[cerulean]

Installed and works great, just 1 question:

I would like the trade rating (if they have one) to display under the person title:

example

Cerulean
Title
itrade rank: xyz

I am unsure how to do this any help?

[principino1984]

not working for me... i uploaded all the files and upgraded the xml version..but I still get "system closed"...

edit.

I solved the problem... just change the version from 2 to 2.1.0 and it works!

Marco

[callumbush]

Hi Jason,

Any thoughts on this?

If it doesn't support this, are there any vBulletin shopping cart solutions you can recommend? I've been looking at Geek Mart but its not available at the moment..
In case it's of any relevance, I will be selling physical products, not downloads...(well not for the foreseeable future anyway)

Best Regards

Callum

Hi Jason,

Looks like a great mod! :)

Does it allow you to restrict the options so that only I can sell things?

The reason I ask is because I would really like to do that instead of simply using paypal buttons, as users will be able to see my feedback like on eBay, and have confidence in purchasing from me.

Cheers

Callum

[gamma626]

I have this working now - wow - super! Geez if it wasn't so early I'd have drinks for everyone!

Ok - here's coffee and the baileys is on the counter.

Thanks to everyone for offering help and insight on this, especially Shazz

[bjf2k]

Hi,

I did have it previously running, but when I uninstalled it looks like its left the tables. This is good as I have my data still, however when I run the XML file I get the below error.

Database error in vBulletin 3.7.1:

Invalid SQL:
CREATE TABLE itrader (
rateid int(10) unsigned NOT NULL auto_increment,
userid int(10) unsigned NOT NULL default '0',
rateduserid int(10) unsigned NOT NULL default '0',
rating tinyint(3) NOT NULL default '0',
buyselltrade tinyint(3) unsigned NOT NULL default '0',
subject varchar(80) NOT NULL default '',
dealurl varchar(255) NOT NULL default '',
dateline int(10) unsigned NOT NULL default '0',
ipaddress varchar(15) NOT NULL default '',
PRIMARY KEY (userid,rateid),
UNIQUE KEY rateduserid (rateduserid,rateid),
KEY rateid (rateid)
) TYPE=MyISAM AUTO_INCREMENT=1;

MySQL Error : Table 'itrader' already exists

Also when I try and do it via the upgrade file, I get an error telling me tables don't exist. Any help is appreciated.

Cheers

Watson

same thing happened to me, how did you fix the problem?

[Florida13]

i have itrader installed and somebody helped me fixit yesterday because it wasnt showing the feedback score under my members avatars in every post. like it will have (0) under there avatar/username, and when you click that it will take you to where you can submit feedback. it will say submit feedback for this user and you select positive, negative, neutral.

but for some reason, it went away again. its up at the top on the toolbar but some reason it wont show up now.

can anybody help fix this?

[bjf2k]

tried to install the mod" itrader" but when i import the xml file
it give me this error
Database error in vBulletin 3.7.2:

Invalid SQL:
ALTER TABLE usergroup ADD itraderpermissions int(10) UNSIGNED NOT NULL default '0';

MySQL Error : Duplicate column name 'itraderpermissions'
Error Number : 1060

MySQL Version : 4.1.22-standard

anyone can help me out

[linkasaur]

Thank you for this mod! It works great!

[bjf2k]

i fixed the problem... i had the 2.0.1 and have 2.1.0 now....mark as installed

thanks

[Digital Jedi]

If you have read this far, then hopefully someone will reply to this comment:

What do you think about how eBay disallows sellers to leave negative feedback if a buyer gives them a negative? I was thinking about implementing a similar feature, so that if one user gives the other a negative, the other person couldn't retialite giving a negative too?

I've never actually had an instance where that has happened on my forum personally. Usually a member will dissapear after getting money from someone and so they leave a negative, but that member also ususally gets banned from the forum anyhow.

That's not a bad idea, actually. We've had this happen several times, using iTrader like a rep system and then turning to the admins to clean up their mess. I think it's logical addition.

[Digital Jedi]

tried to install the mod" itrader" but when i import the xml file
it give me this error
Database error in vBulletin 3.7.2:

Invalid SQL:
ALTER TABLE usergroup ADD itraderpermissions int(10) UNSIGNED NOT NULL default '0';

MySQL Error : Duplicate column name 'itraderpermissions'
Error Number : 1060


MySQL Version : 4.1.22-standard

anyone can help me out
Isn't that an error you'd get when you don't have overwrite ticked?

[cerulean]

Any help?

Installed and works great, just 1 question:


I would like the trade rating (if they have one) to display under the person title:

example

Cerulean
Title
itrade rank: xyz


I am unsure how to do this any help?

[bjf2k]

Isn't that an error you'd get when you don't have overwrite ticked?

i got it fixed. took me a day and half to figure it out:D

[CarterMarkham]

So those of you who are usuing this now, how well does it work, being an interim release I am skeptical.

[CarterMarkham]

So i installed this, but nothing shows up. I uploaded everything, but its like nothing is there, no links, no numbers under peoples names, no tabs, no nav link. And yes, it is turned on...

Any help in adding a tab in the users profile, and a link in the UserCP menu?

[CarterMarkham]

And I also updated permissions...

[markp_2000]

My forums would revolt if I could not get the up in the new version.

I put together an auto-insertion hack for those interested. In the next go around you can incorporate it if you wish.

The hack is pretty plain jane, but it avoids me having to edit templates.

It is running right now at www.organicgrocerydeals.com.

Mark

[blogcrash]

not working for me... i uploaded all the files and upgraded the xml version..but I still get "system closed"...

edit.

I solved the problem... just change the version from 2 to 2.1.0 and it works!

Marco

Please... I'm becoming crazy also around this.

Can anybody help me?
Which template should i chande and wich code must i use please????

[Jah-Hools]

Will this work OK as a fresh install from scratch on 3.7 ? (I haven't used ITrader before)

[Digital Jedi]

So i installed this, but nothing shows up. I uploaded everything, but its like nothing is there, no links, no numbers under peoples names, no tabs, no nav link. And yes, it is turned on...

Any help in adding a tab in the users profile, and a link in the UserCP menu?

Please... I'm becoming crazy also around this.

Can anybody help me?
Which template should i chande and wich code must i use please????

Guys, that information is included in the ZIP file you downloaded. You have to do it manually.


Will this work OK as a fresh install from scratch on 3.7 ? (I haven't used ITrader before)

I don't see why not. That's mainly the purpose of the 3.7 release.

[blogcrash]

Everything working well ... just as i wanted :p

Thanks for this great Mod

[MrD]

Hi,
i Use it in vb 3.7.2 and the Editor for Comments is not Shown.

[DavidWWL]

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.

None of that works for me. Any other ideas? :(

[SMosher]

Thank you for your time and your effort!

[honcho]

cheers m8 installed

[Shazz]

Successfully installed, had a problems with the iTrader being disabled many times when trying to upgrade. I then just completely removed it and put it back on :)

[MrD]

Hi,
i deinstall the Addon and reinstall it.
but the Error with the Messagebox is the same?
Have Anyone an Idea?

[MoneyProBlog]

I'm new to installing hacks. I believe I have installed everything as per the readme file but I don't see how to set user permissions for itrader. Can someone help me out?

[Shazz]

I'm new to installing hacks. I believe I have installed everything as per the readme file but I don't see how to set user permissions for itrader. Can someone help me out?

Admincp > Usergroup Manager > Select your usergroup and edit it

iTrader permissions should be near the bottom of the page.

[MoneyProBlog]

Thanks for that, Shazz. I updated the permissions but still do not see itrader ratings on the user interface. There is only the admin and a user on my forum right now. Is that why or should the itrader ratings be up as soon as I have entered the info and refreshed the page?

[Shazz]

Thanks for that, Shazz. I updated the permissions but still do not see itrader ratings on the user interface. There is only the admin and a user on my forum right now. Is that why or should the itrader ratings be up as soon as I have entered the info and refreshed the page?

If you have done what it has said in the readme file, it should show up in a post and you can click on the iTrader "0" and it should take you to the interface.

[MoneyProBlog]

Here are the instructions and steps I took:

1. Upload ALL the files in the "Upload" directory, including the sub-directories!

All files should be uploaded.

2. Install the iTrader Product via the Plugin Manager. The XML file is located in the "Product XML" folder.


Installed this as a product and not a plugin from my computer and not server. Could this be the source of the problem?

3. Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.


User permissions edited both for admin, registered users, and non-registered users can view the trader rankings.

4. Edit your iTrader options in the vBulletin Options menu. They will be listed at the bottom of the page in their own group.


Edited itrader options to active.

5. Edit your templates, more info can be found in the Template Info.html file.

Did not edit templates.

6. That's it, your iTrader system should be up and running!

[Shazz]

Here are the instructions and steps I took:

1. Upload ALL the files in the "Upload" directory, including the sub-directories!

All files should be uploaded.

2. Install the iTrader Product via the Plugin Manager. The XML file is located in the "Product XML" folder.


Installed this as a product and not a plugin from my computer and not server. Could this be the source of the problem?

3. Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.


User permissions edited both for admin, registered users, and non-registered users can view the trader rankings.

4. Edit your iTrader options in the vBulletin Options menu. They will be listed at the bottom of the page in their own group.


Edited itrader options to active.

5. Edit your templates, more info can be found in the Template Info.html file.

Did not edit templates.

6. That's it, your iTrader system should be up and running!

Ahh. I thought it was all in one readme file. Sorry about that, take a look in the Template info.html that came with the iTrader zip and follow those steps.

[JoeBOBBillyTed]

I have the feedback viewing displayed in the postbits. However when I try to view it on the memberinfo page it isn't there. Any recommendations on how to get it to show?

[MoneyProBlog]

Ahh. I thought it was all in one readme file. Sorry about that, take a look in the Template info.html that came with the iTrader zip and follow those steps.

I have looked at the template file, but as a first time hack installer I'm not sure where to even begin. I installed the vbulletin blog feature but that was written out step by step.

Does anybody have any advice on what I should be looking for as far as files to edit and where to find them?

Thanks.

[Shazz]

I have looked at the template file, but as a first time hack installer I'm not sure where to even begin. I installed the vbulletin blog feature but that was written out step by step.

Does anybody have any advice on what I should be looking for as far as files to edit and where to find them?

Thanks.

Admincp -> Styles and Languages -> Style manager -> Select the style from the drop down menu on the right and click edit template
Here you will have the list of templates


Find postbit or postbit_legacy

[theholst]

Cant seem to find it in the permissions. I dont think I have a file in the correct place. PLEASE HELP!

[Shazz]

Cant seem to find it in the permissions. I dont think I have a file in the correct place. PLEASE HELP!

Check in your admincp > Product manager and make sure you see iTrader 2.1.0 there.

[theholst]

Yes it is there. I did the template thing as well. Just no option for permissions is there, for this mod.

[Shazz]

Yes it is there. I did the template thing as well. Just no option for permissions is there, for this mod.

Admincp -> Usergroup manager

Be sure to go through the whole usergroup page and look for the iTrader settings
There should be 3 of them

[theholst]

nope,

Just a question when I upload the file do I upload the "UPLOAD" folder to the root, or do I upload the enter file to the root file?

[MoneyProBlog]

Thank you Shazz, I know have itrader up on the post information because of your help. I've now moved on trying to include itrader in the memberlist.

What is the correct code I should use for the memberlist_resultsbit template? I tried several things. Here is the last code I attempted:

<if condition="$show['userid']"> AND exec_switch_bg()"><td
class="$bgclass">$userinfo<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">
$post[itrader_total]</a></b></td></if>

[Shazz]

nope,


Just a question when I upload the file do I upload the "UPLOAD" folder to the root, or do I upload the enter file to the root file?

Double click on the folder "UPLOAD" then drag those folders and files to your forum root.

[Shazz]

Thank you Shazz, I know have itrader up on the post information because of your help. I've now moved on trying to include itrader in the memberlist.

What is the correct code I should use for the memberlist_resultsbit template? I tried several things. Here is the last code I attempted:


<if condition="$show['userid']"> AND exec_switch_bg()"><td
class="$bgclass">$userinfo<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">
$post[itrader_total]</a></b></td></if>

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

[vithorius]

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

https://vborg.vbsupport.ru/external/2011/07/3.gif I too have lots of problems when trying to put the itrader information available in the memberlist_resultbit template... :(

:confused: In what line should I put that code? What should I search in the template so that I can insert it before (or after)?


Thank you so very much! :up:

[zeus_r6]

Crazy question, but will this work on 3.6.4?

[Shazz]

https://vborg.vbsupport.ru/external/2011/07/3.gif I too have lots of problems when trying to put the itrader information available in the memberlist_resultbit template... :(

:confused: In what line should I put that code? What should I search in the template so that I can insert it before (or after)?


Thank you so very much! :up:
For whatever template you want to display it in, postbit, profile etc. The directions are inside the zip.
Crazy question, but will this work on 3.6.4?

Use the 3.6.x version

iTrader 2.0

[cavern]

I've updated to the new 2.1.0, running vbulletin 3.7.2 PL1

I had to manually update the version number, but iTrader works. Postbit and Postbit Legacy template modifations show properly using

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

But in ministats

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

does not work, it returns

iTrader: ()

Any ideas?

EDIT: Doesn't work on amy Member Info template areas either.

[blackmamba16]

Getting

The iTrader system is currently closed.

After updating from 2.0.1 to 2.1.0 :-(


any ideas?

[Shazz]

Getting



After updating from 2.0.1 to 2.1.0 :-(


any ideas?

Same here, I then uninstalled it then re-installed. You will lose the past iTraders but iTrader will be working.

[cavern]

Getting



After updating from 2.0.1 to 2.1.0 :-(


any ideas?

Same here, I then uninstalled it then re-installed. You will lose the past iTraders but iTrader will be working.

Folks, this has been covered:

Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free"..

I just did this about 5 minutes ago and it fixed that very issue.

Also as a note to everyone, if you want to put feedback in your memberinfo sections, vbulletin CHANGED its code for the memberinfo section.

<if condition="$userinfo['userid']"><div>Feedback: (<b><a href="itrader.php?$session[sessionurl]u=$userinfo[userid]">$userinfo[itrader_total]</a></b>) ($userinfo[itrader_pcnt]%</a>)</div></if>

Works fine on my 3.7.2 PL2, just wanted to share. Note that $post has changed to $userinfo

[blackmamba16]

fuuuck - just deleted itrader tables manually in SQL ^^

Has anyone the source masql command to create the tables needed for 2.1.0 - Cause installation doesnt more create them Oo

[markp_2000]

I updated my auto-insertion hack for iTrader 2.1.

Inserts iTrader - iTrader (0) - in both postbits
Inserts iTrader - iTrader link - in a usercp (at the bottom of left side menu)
Inserts iTrader - Leave Feedback link - on a persons profile page.

You can see the hack in action at www.hotcouponworld.com

Mark

[AWJunkies]

This mod should include your above file by default as well as settings to turn on and off in each location. Here is another bit of code for you guys if you want it:

This creates a link at the bottom of the 1st post message to give feedback to the user. This is selectable for what forums you want to have this in. For instance just the for sale forums. Example below make sure to put YOUR URL and the forums you want.

If you have TMS:
Product: iTrader
Template: postbit/postbit_legacy
Title: iTrader Postbit Link
Varname: itrader_postbit_link
Active: Yes
Searchorder: 5
Search for Text: $template_hook[postbit_signature_start]
Insert Above Text
<if condition="$post['userid'] AND $show['member'] AND $post[postcount]==1 AND in_array($GLOBALS[forumid], array(41,43,44))"><br />
<a href="http://www.yourdomain.com/itrader_feedback.php?u=$post[userid]&dealurl=http://www.yourdomain.com/showthread.php?t=$thread[threadid]"><span style="font: 20px verdana; color: red; font-weight: bold">Leave Feedback HERE</span></a></if>

Or you can create a plugin and follow structure in the above XML in last post and add this code to the hook I state in this post. Can do this many ways but this is a MUST have.

[markp_2000]

Yes, I will work on that. In the mean time here is the all of the template_hooks for the postbits.


template name="postbit_legacy" and template name="postbit"
template_hook[postbit_start]
template_hook[postbit_userinfo_left]
template_hook[postbit_userinfo_right_after_posts]
template_hook[postbit_userinfo_right]
template_hook[postbit_messagearea_start]
template_hook[postbit_signature_start]
template_hook[postbit_signature_end]
template_hook[postbit_controls]
template_hook[postbit_end]
template_hook[postbit_user_popup]
hook = "postbit_display_complete"

[Vindicator]

Folks, this has been covered:


That's great, but I still don't have a efin clue how to put in to debug mode! :(

[markp_2000]

edit your config.php file. At the bottom will be a comment about debug. Uncomment that line.

[Vindicator]

We are talking about the vBulletin config.php right? I looked in there and there is no reference to debug. Used vi pattern search also in the file with no hits.

[markp_2000]

Put this at the end of your config.php file
Turn your forum off before you do this. Lots of info can be had from this info.
Then comment out the line afterwards.


$config['Misc']['debug'] = true;

[Vindicator]

your a legend, cheers!

[cavern]

That's great, but I still don't have a efin clue how to put in to debug mode! :(

Ha ha sorry, I just assume that most people know how todo this since their using vbulletin.org, I'll remember not to assume next time :).

[blackmamba16]

Hmmm, still gettin'

The iTrader system is currently closed.

I've been editing version number in plugins section to 2.1.0 but doesnt change anything :erm:

I need that Plugin :(

[Jah-Hools]

My classified section is hidden from non members

So is there a case for hiding Itrader ratings from non members?

Or even making the ratings only visible WITHIN the classifieds forum?

(should a persons trading rating drag around with them all over the forum is the question..)

Any power users tips on this would be very appreciated

Many thanks in advance

[zeus_r6]

Use the 3.6.x version

iTrader 2.0

No files uploaded :(

[HP10T]

Anyone having problems with their users getting an error stating they don't have the "rights" to leave feedback? Not sure why this would happen..

[HP10T]

My users are getting this error..
xxxxxx, you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Log Out Home

I checked the usergroup permissions and everyone has a yes next to being able to leave feeedback etc.. The only no is the one next to edit and delete feedback.

[HP10T]

I uninstalled itrader and reinstalled and reenabled the permissions and am still getting this error...

**EDIT**
I enabled, any user can edit or delete ratings and it will allow me to submit feedback now.... Not sure if anyone knows what is up with that?

[markp_2000]

Hmmm, still gettin'



I've been editing version number in plugins section to 2.1.0 but doesnt change anything :erm:

I need that Plugin :(

I had an odd item when I upgraded. I got the same error message as you, then I check to see if it was enabled and it was not. You might want to check that.

Mark

[Anshpcea]

i installed it , but its not showing in my forums. Did I need any template edit?
Please help.

[zeus_r6]

Tried installing this on my 3.6.4 forums and the older version thread has been put in the mod graveyard. Does anybody have the older version files yet?

[zeus_r6]

anybody?

[zeus_r6]

BTW-This version will not work on older versions of VB

[Anshpcea]

i installed it , but its not showing in my forums. Did I need any template edit?
Please help.

[Shazz]

i installed it , but its not showing in my forums. Did I need any template edit?
Please help.

Yes, go through every file in that zip and read everything.

[masterweb]

I'm running a 3.7.2 board, after uploading all files once i try to import the product (the xml file) i get:

A conflict was detected in the bitfields. You cannot continue with the installation of this product until this has been fixed. The conflicts found were:

* Bitfield Collision: credits_cantearn = prefixrequired

So what to do???

[Digital Jedi]

You need to upgarde vBCredits. But check within the vBCredits thread to be sure.

[Robi_Kenobi]

Works really good for me. Can you please add checking if a "deal URL" is entered twice. So everyone can one rate once per deal URL.

[Pirat3]

Will this cause lag or slow down my website? I have a fairly large website so would like to know thanks.

[Digital Jedi]

No, it won't. It's just a rating system.

[Jah-Hools]

Digging it so far! Thanks!

But for my forum, member's feedback ratings need to be hidden OUTSIDE the classifieds forum. (the classifieds is HIDDEN on my forum and is only visible to registered members so this will confuse non members who will be wondering what its for and will give away the secret of the classifieds)

Can you supply some template code to fix it so that the Itrader score is shown only in selected forums please?

Many thanks

[Shazz]

Digging it so far! Thanks!

But for my forum, member's feedback ratings need to be hidden OUTSIDE the classifieds forum. (the classifieds is HIDDEN on my forum and is only visible to registered members so this will confuse non members who will be wondering what its for and will give away the secret of the classifieds)

Can you supply some template code to fix it so that the Itrader score is shown only in selected forums please?

Many thanks

Search for the <if condition type code that you need to display that in certain forums.

[ETDC]

Installed, thanks. :)

[marc2005]

wait for final release of 3.7.x! Great!

[TimberFloorAu]

We have uninstalled this mod, until its out of BETA.

We now have numerous MySql errors and need to fix this.

All template edits have been reverted, product succesfully uninstalled.

The error we get ( but cannot locate ) .. so help needed is:

nvalid SQL:

SELECT
userfield.*, usertextfield.*, user.*, UNIX_TIMESTAMP(passworddate) AS passworddate,
IF(displaygroupid=0, user.usergroupid, displaygroupid) AS displaygroupid,
language.phrasegroup_global AS phrasegroup_global,
language.phrasegroup_itrader AS phrasegroup_itrader,
language.phrasegroup_posting AS phrasegroup_posting,
language.phrasegroup_prefix AS phrasegroup_prefix,
language.phrasegroup_adv_gallery_int AS phrasegroup_adv_gallery_int,
language.options AS lang_options,
language.languagecode AS lang_code,
language.charset AS lang_charset,
language.locale AS lang_locale,
language.imagesoverride AS lang_imagesoverride,
language.dateoverride AS lang_dateoverride,
language.timeoverride AS lang_timeoverride,
language.registereddateoverride AS lang_registereddateoverride,
language.calformat1override AS lang_calformat1override,
language.calformat2override AS lang_calformat2override,
language.logdateoverride AS lang_logdateoverride,
language.decimalsep AS lang_decimalsep,
language.thousandsep AS lang_thousandsep
,mgcugp.mgc_cb_evo_default_color, ppgal_user.*
FROM yobromofuser AS user
LEFT JOIN yobromofuserfield AS userfield ON (user.userid = userfield.userid)
LEFT JOIN yobromofusertextfield AS usertextfield ON (usertextfield.userid = user.userid) LEFT JOIN yobromoflanguage AS language ON (language.languageid = IF(user.languageid = 0, 1, user.languageid))
LEFT JOIN yobromofusergroup AS mgcugp ON (user.usergroupid=mgcugp.usergroupid)
LEFT JOIN yobromofppgal_user AS ppgal_user ON (ppgal_user.userid = user.userid)
WHERE user.userid = 2;

MySQL Error : Unknown column 'language.phrasegroup_itrader' in 'field list'
Error Number : 1054
Request Date : Thursday, July 31st 2008 @ 09:37:38 AM
Error Date : Thursday, July 31st 2008 @ 09:37:38 AM
Script : http://www.xxxxxxxx.com/forum/itrader_feedback.php?u=34
Referrer :
IP Address : xxx.xxx.xxx.xxx
Username :
Classname : vB_Database
MySQL Version :

[TimberFloorAu]

Anyone any suggestions?

[msken]

Could someone tell me what "is_member_of()" function" code I would need to put in my postbit to exclude certain usergroups from displaying a itrader score? I don't want my banned users or sponsors to have a feedback score for obvious reasons. Thanks everyone!

[packetattack]

Anyone any suggestions?

Sorry, not sure about the SQL issue, however I'm getting the "iTrader is closed" message as well as a few other people here. I read through the entire thread and tried everything, reuploading files, re-importing XML with overwrite etc. Still no go. I'm stumped. I'm pretty good at getting plugins/mods working, just can't figure out why this is a no go. I had a previous version of iTrader before that was working fine. Not sure if the upgrade process munged something but as of right now I have no iTrader anymore, sucks.

[Jah-Hools]

Installed!

Early days yet..

I am hoping it will work out!

Thanks

[TimberFloorAu]

We still have SQL errors, caused during and after the removal of this mod. My suggestion would be, unless your a database whizzkid, or the author actually ever posts here again, to avoid until he has answered some issues, and addressed them, and or its gone gold.

Ozzy

[DsmNikki]

Installed Works Awesome Thanks :)

[packetattack]

Figured it out. I had to follow the version number update after doing the debug option. Works great!

Thanks!

[Digital Jedi]

We still have SQL errors, caused during and after the removal of this mod. My suggestion would be, unless your a database whizzkid, or the author actually ever posts here again, to avoid until he has answered some issues, and addressed them, and or its gone gold.

Ozzy
So far your the only one I know of who has reported any database errors. When did you encounter your first error? Are you sure you fully uninstalled? You should no longer have any tables in the database.

Technically, this isn't a BETA version, but an interim release until the full version is completed, which is reported to be an undermined amount of time. What you might have here, since I'm not hearing this to be a common problem, is a modification conflict with something else. Have you tried disabling your hacks to see if you still get the error with them all off?

[MoneyProBlog]

For whatever template you want to display it in, postbit, profile etc. The directions are inside the zip.

Use the 3.6.x version

iTrader 2.0


I don't think the instructions are going to be enough for me to get this one.

Below are the instructions inside the zip:

-----------------------------------------------------------

Two fields are added to the "user" table to facilitate rating usage pretty much anywhere you please within the forum. The two fields are:

* itrader_total - iTrader Score (stored as an integer)
* itrader_pcnt - Percent Positive Feedback (also stored as an integer)

Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

Additionally it would be wise to have some sort of link that is easily accessible to your members so they can view their own ratings. My suggestion would be to add some code in the navbar or usercp menu somewhere. If no userid is specified then the system defaults to the user's own iTrader page.

<a href="itrader.php?$session[sessionurl]">iTrader</a>

Use your imagination where you want these links to be visible, there's nothing set in stone where it should be display or how it should look. Some people wanted the percent score so I added in this version. You can get creative and use some stars or something based on their score or positive ranking.

If you only wanted the info to show up for specific usegroup, you can use the "is_member_of()" function conditional in your templates. Also if you only wanted it to show up for specific forum sections, you could use the "in_array()" function. Read more in the vBulletin documentation for nifty things with template conditionals.

Sorry to skimp on the documentation, next release will be much better, however most people should know what they are doing by now with templates and if you don't, spend the time to learn as you can greatly enhance your forum.

------------------------------------------------------------------------------------------------------------

Can anybody give me the code and where to put it (in relation to the other code) for the member info and member list templates? I've never implemented a hack besides putting the initial code in the post bit legacy and inserting the vbulletin blog so I can't use my imagination on where to put it.

Shazz, Mark, and all those that have helped - thank you very much. I'm very new to this code and I am struggling.

I've tried implementing the codes suggested but none have worked - either nothing happens or it screws up the other code.

[Digital Jedi]

I don't think the instructions are going to be enough for me to get this one.

Below are the instructions inside the zip:

-----------------------------------------------------------

Two fields are added to the "user" table to facilitate rating usage pretty much anywhere you please within the forum. The two fields are:

* itrader_total - iTrader Score (stored as an integer)
* itrader_pcnt - Percent Positive Feedback (also stored as an integer)

Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post</a></b>)</div></if>

Additionally it would be wise to have some sort of link that is easily accessible to your members so they can view their own ratings. My suggestion would be to add some code in the navbar or usercp menu somewhere. If no userid is specified then the system defaults to the user's own iTrader page.

<a href="itrader.php?$session[sessionurl]">iTrader</a>

Use your imagination where you want these links to be visible, there's nothing set in stone where it should be display or how it should look. Some people wanted the percent score so I added in this version. You can get creative and use some stars or something based on their score or positive ranking.

If you only wanted the info to show up for specific usegroup, you can use the "is_member_of()" function conditional in your templates. Also if you only wanted it to show up for specific forum sections, you could use the "in_array()" function. Read more in the vBulletin documentation for nifty things with template conditionals.

Sorry to skimp on the documentation, next release will be much better, however most people should know what they are doing by now with templates and if you don't, spend the time to learn as you can greatly enhance your forum.

------------------------------------------------------------------------------------------------------------

Can anybody give me the code and where to put it (in relation to the other code) for the member info and member list templates? I've never implemented a hack besides putting the initial code in the post bit legacy and inserting the vbulletin blog so I can't use my imagination on where to put it.

Shazz, Mark, and all those that have helped - thank you very much. I'm very new to this code and I am struggling.

I've tried implementing the codes suggested but none have worked - either nothing happens or it screws up the other code.
The block of code that begins with [I]if condition, just put that anywhere in your postbit_legacy template.

[MoneyProBlog]

I have it in and working in the postbit legacy but I can't implement it anywhere else.

Thanks for the reply.

[Digital Jedi]

That block of code is only for the postbits, and not anywhere else. The next line of code in the documentation is for creating a link to iTrader everywhere else.

[TimberFloorAu]

So far your the only one I know of who has reported any database errors. When did you encounter your first error? Are you sure you fully uninstalled? You should no longer have any tables in the database.

Technically, this isn't a BETA version, but an interim release until the full version is completed, which is reported to be an undermined amount of time. What you might have here, since I'm not hearing this to be a common problem, is a modification conflict with something else. Have you tried disabling your hacks to see if you still get the error with them all off?

we are getting approx 50 emails per day from our site , with itrader related error.

I have no idea why and what is causing it, we have removed the product in its entirety, and also reverted any template changes, according to reverse install procedures.


Error email we receive is thus...

Database error in vBulletin 3.7.2:

Invalid SQL:

SELECT languageid,
phrasegroup_global AS phrasegroup_global,
phrasegroup_itrader AS phrasegroup_itrader,
phrasegroup_prefix AS phrasegroup_prefix,
phrasegroup_adv_gallery_int AS phrasegroup_adv_gallery_int,
options AS lang_options,
languagecode AS lang_code,
charset AS lang_charset,
locale AS lang_locale,
imagesoverride AS lang_imagesoverride,
dateoverride AS lang_dateoverride,
timeoverride AS lang_timeoverride,
registereddateoverride AS lang_registereddateoverride,
calformat1override AS lang_calformat1override,
calformat2override AS lang_calformat2override,
logdateoverride AS lang_logdateoverride,
decimalsep AS lang_decimalsep,
thousandsep AS lang_thousandsep
FROM yobromoflanguage
WHERE languageid = 1;

MySQL Error : Unknown column 'phrasegroup_itrader' in 'field list'
Error Number : 1054
Request Date : Monday, August 4th 2008 @ 06:47:20 PM
Error Date : Monday, August 4th 2008 @ 06:47:20 PM
Script : http://www.yobromofo.com/forum/itrader.php?u=34
Referrer :
IP Address : xx.xx.xx.xx
Username :
Classname : vB_Database
MySQL Version :

However, I have noticed, the user id is always the same.
It being one of our moderators.

Any suggestions greatly received, as its driving me mad !

[Raptor]

all installed ok - however i cannot see where / how to leave feedback ?

any clues ? Thanks

[Raptor]

ok found the link itrader_feedback.php?u=X

great mod *installed*

[Digital Jedi]

That is wierd. Have you looked over your database in phpMyAdmin to see if there's anything lingering?

[TimberFloorAu]

That is wierd. Have you looked over your database in phpMyAdmin to see if there's anything lingering?

I honestly cannot see anything, the table it refers to doesnt exist..

its weird lol

[soundbarrierpro]

Love the product and it's usefulness. However, I get this below on my memberlist. How can I remove it?

https://vborg.vbsupport.ru/external/2008/08/67.jpg

[m4x3vo]

Ive followed all the steps in the readme and the template html's. But im still getting the no permission thing when i click on my itrader. I enabled itrader, but for some reason when i go to user permissions and try to adjust the itrader 3 buttons at the bottom, and turn them to yes, they dont change at all, but it says successful. When i go back they're still on no. Please help me

After clicking save changes when i set all the itrader permissions to Yes. It creates that group again in the custom groups o.0. for example i clicked edit adminstrator in the default groups, and set the permissions to yes, and when i clicked save, it created another admin group in the custom groups o___o

[obetyance]

Downloaded, Installed and Nominated!!! Everything is working perfectly well. I just followed all the instructions and use my admin instinct and common sense.

Before I installed this, I was just using my REPUTATION POWER which is just a waste of space and bandwidth and time. :)

Anyway, is there a way I could use this iTrade in replacement of the REP POWER by adding some items? And then name it User's Rating. Right now, there's BUYER, SELLER, TRADE... How about adding something like FRIEND, ACQUAINTANCE, GENERAL, ETC. So, it would be relevant to rate somebody outside the For Sale section regarding his personality or whatever.

I'm not really good in messing up with the codes. When I looked at iTrade, it gave me a migraine on how and where to start.

Thanks so much for your time. :)

[domaino]

Hey,

Can anyone help me out with this? The mod seems to have installed no problem, but I am having problem when it comes to placement. I have included the if conditional inside my postbit_legacy template but to no avail.

I am interested in providing a system similar to that of namepros where the trader rating for each member is displayed inside each and every thread as well as inside their profile.

http://www.namepros.com/parking-and-traffic-monetization/499117-5-ways-make-more-money-domain.html#post2969073

Could someone help me out with this please and perhaps tell me where I'm going wrong?

Cheers.

[soundbarrierpro]

Hey,

Can anyone help me out with this? The mod seems to have installed no problem, but I am having problem when it comes to placement. I have included the if conditional inside my postbit_legacy template but to no avail.

I am interested in providing a system similar to that of namepros where the trader rating for each member is displayed inside each and every thread as well as inside their profile.

http://www.namepros.com/parking-and-traffic-monetization/499117-5-ways-make-more-money-domain.html#post2969073

Could someone help me out with this please and perhaps tell me where I'm going wrong?

Cheers.

by default this mod has your itrader stat in every thread after the templates are modified. You need to install this itrader add on in order for it to be in their profile.
https://vborg.vbsupport.ru/showthread.php?t=178158&highlight=itrader

[domaino]

by default this mod has your itrader stat in every thread after the templates are modified. You need to install this itrader add on in order for it to be in their profile.
https://vborg.vbsupport.ru/showthread.php?t=178158&highlight=itrader

Ok, thanks for the reply.

Problem is, I have included: <if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

inside my postbit_legacy template, but see nothing in the way of ratings. Is there something I'm missing? Do I need to add this code anywhere else in order to see ratings displayed under the user's name in every thread? Or is it a matter of an incorrect install?

Help appreciated.

[soundbarrierpro]

I think it's gotta be missing something. You need to edit a few templates, but you don't need the if tags

Just this.

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

[Digital Jedi]

I was about to suggest the same thing. The <if> conditional is probably making it invisible.

[domaino]

I think it's gotta be missing something. You need to edit a few templates, but you don't need the if tags

Just this.

<div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>


Hey, thanks, I tried implementing that piece of code in my header (at least there I will be able to find it (I have no idea about all the particular templates and how they are displayed) and it produced the following:

iTrader: ()

So I guess I've gone wrong somewhere.

Here is what I have done so far:

All the contents of the includes folder => includes folder on server
iTrader folder within the images folder => images folder on server
Contents of the admin cp folder => into the admincp folder on my server

I then installed the product xml via the product manager (wouldn't let me install it as a plugin (as directed by the instruction file).

I changed the usergroup permissions, configured the iTrader options and then edit my postbit_legacy template to include: <div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

And nothing. Perhaps this isn't designed for someone with next to no intuition when it comes to programming! :D

If anyone could help me it would be greatly appreciated, otherwise I guess I will just cut my losses.

[soundbarrierpro]

Hey, thanks, I tried implementing that piece of code in my header (at least there I will be able to find it (I have no idea about all the particular templates and how they are displayed) and it produced the following:

iTrader: ()

So I guess I've gone wrong somewhere.

Here is what I have done so far:

All the contents of the includes folder => includes folder on server
iTrader folder within the images folder => images folder on server
Contents of the admin cp folder => into the admincp folder on my server

I then installed the product xml via the product manager (wouldn't let me install it as a plugin (as directed by the instruction file).

I changed the usergroup permissions, configured the iTrader options and then edit my postbit_legacy template to include: <div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div>

And nothing. Perhaps this isn't designed for someone with next to no intuition when it comes to programming! :D

If anyone could help me it would be greatly appreciated, otherwise I guess I will just cut my losses.

You are doing very well, but there's other templates. Read the template info.html file supplied within the download package. It walks you through every edit you need to make.

[domaino]

Hey.

Yeah, sorry, should have noted, I have already done the edits on the templates and nothing doing. I have removed the conditional from the MEMBERINFO and memberlist_resultsbit templates and included it in the postbit template. I have done all the necessary edits but still I don't see any trader ratings; all I see is:

iTrader ().

Anyway, thanks for your help. But I think this one is for someone who actually knows what they're doing :D

Cheers.

[domaino]

18 hours later and it works!

I am an editing MACHINE! :D

Thanks all, much appreciated :)

[soundbarrierpro]

18 hours later and it works!

I am an editing MACHINE! :D

Thanks all, much appreciated :)


Everything takes time when hacking code. Never try to rush because this is where mistakes happen. Good thing is, mostly everything is able to be fixed. Good job.

[Rubiano]

I have instaled iTrader on my board, and some members have over 5 trades submitted in their iTraders, but only 5 trades are showing up when they post.




https://vborg.vbsupport.ru/external/2008/08/26.jpg



https://vborg.vbsupport.ru/external/2008/08/27.jpg

[Jah-Hools]

I have it installed and organized so that the Itrader totals and logo are only visible in the classified section.

But I have run into a problem where sellers are unable to find buyers to leave feedback..

Can you think of a solution?

Perhaps have is visible in the user profile data fields?

I dont really want the Itrader data visible out in the main forums..

Thanks

[robertpro2a]

I must be doing something wrong. I uploaded the FTP files and installed the XML product, and activated it under the "General VBulletin Settings", but I don't see one new thing on my website. Where is it?

[soundbarrierpro]

I must be doing something wrong. I uploaded the FTP files and installed the XML product, and activated it under the "General VBulletin Settings", but I don't see one new thing on my website. Where is it?

Check your downloaded install package. There is a template configuration .html file in there you need to read to set the variables on the templates you want this to show up on.

[robertpro2a]

Thanks soundbarrier. I've added the link, but now when it loads the trader.php it is blank. I think it is because it is not passing the session data. $session[sessionurl] is a NULL value for some reason:

Under NAVBAR:

<if condition="$show['quick_links_groups']">
<tr><td class="vbmenu_option"><a href="trader/itrader.php?$session[sessionurl]">iTrader</a></td></tr>
</if>

Any ideas?

Oh FYI, I had to create a sub folder "trader", because if I didn't, it would have rewritten all the images & admincp that's already on my server! Did anyone else notice that?

[robertpro2a]

Any ideas for the strange session issue?

[Digital Jedi]

Thanks soundbarrier. I've added the link, but now when it loads the trader.php it is blank. I think it is because it is not passing the session data. $session[sessionurl] is a NULL value for some reason:

Under NAVBAR:

<if condition="$show['quick_links_groups']">
<tr><td class="vbmenu_option"><a href="trader/itrader.php?$session[sessionurl]">iTrader</a></td></tr>
</if>

Any ideas?

Oh FYI, I had to create a sub folder "trader", because if I didn't, it would have rewritten all the images & admincp that's already on my server! Did anyone else notice that?
Well, that's likely your problem. You have to overwrite the new folders onto the old ones. It won't erase existing content, it will simply add new content to those folders. If you don't do that, then the product doesn't know what to look for.

[ErrorLog]

Installed :]

[ps2wiz]

I have instaled iTrader on my board, and some members have over 5 trades submitted in their iTraders, but only 5 trades are showing up when they post.




https://vborg.vbsupport.ru/external/2008/08/26.jpg



https://vborg.vbsupport.ru/external/2008/08/27.jpg

I have the same issue, does anyone know a fix?

[mlthmp]

Hey guys.. I have a question.
I am trying to add a link to my member;s profile page (in the mini stats box) Directly under the "Show All Statistics" link.

This is the code im trying to use, however whenever I try and test it out it takes me to my itrader stats. -

<div class="alt2 smallfont block_row block_footer"><a href="itrader.php?$session[sessionurl]u=$post[userid]">iTrader Info</a></div>

Using that code the link shows fine in the mini stats box.. but when you click on it it opens http://www.smallball.org/itrader.php?u= (which shows me my info) What do I need to be using to have the link point to that person's (whose profile you are viewing) stats instead?

Sorry if this is a dumb question.. I am new to VB, my forums have been opened less than a week.

[Digital Jedi]

Hey guys.. I have a question.
I am trying to add a link to my member;s profile page (in the mini stats box) Directly under the "Show All Statistics" link.

This is the code im trying to use, however whenever I try and test it out it takes me to my itrader stats. -

<div class="alt2 smallfont block_row block_footer"><a href="itrader.php?$session[sessionurl]u=$post[userid]">iTrader Info</a></div>

Using that code the link shows fine in the mini stats box.. but when you click on it it opens http://www.smallball.org/itrader.php?u= (which shows me my info) What do I need to be using to have the link point to that person's (whose profile you are viewing) stats instead?

Sorry if this is a dumb question.. I am new to VB, my forums have been opened less than a week.
It's the $post[userid].

$post is only for the postbit templates, which is why there's no ID number at the end of your URL when you click on it. The link simply takes you to the default itrader.php page.

There is a product for adding an iTrader stats box to your profile pages available. You can find it by doing a Title Search for iTrader.

[solidlink]

I think there is a problem with my iTrader.

http://www.onestash.com/forums/showthread.php?t=340

How come there are 2 ratings?

[soundbarrierpro]

I think there is a problem with my iTrader.

http://www.onestash.com/forums/showthread.php?t=340

How come there are 2 ratings?

Looks like the variable was entered twice in the postbit. Remove one.

[solidlink]

What variable? How do I remove?

[Digital Jedi]

The template edit that you made to your postbit, it looks like you made it twice. Reference the template edit instructions and remove the duplication.

[solidlink]

found it, thanks :D

[MrD]

Hi,
for all they have the same Problem with the Editor box and become no Answer https://vborg.vbsupport.ru/showpost.php?p=1566952&postcount=73
I found that the Code from iTrader is not vB standart conform.

Here is a Fix.
Fix
Create 2 new Plugins.
Title: iTrader Set parser options
Hook: bbcode_parse_start
Execution Oder: 5
if ($forumid == 'itrader')
{
$dohtml = $forum['allowhtml'];
$dobbimagecode = $forum['allowimages'];
$dosmilies = $forum['allowsmilies'];
$dobbcode = $forum['allowbbcode'];
}
Plugin Active: yes

Title: iTrader Set editor options
Hook: editor_toolbar_switch
Execution Oder: 5
if ($forumid == 'itrader')
{
$can_toolbar = 1;
$show['img_bbcode'] = 1;
}
Plugin Active: yes

next search in itrader_detail.php and itrader_feedback.php

$editorid = construct_edit_toolbar($itrader['message'], 0, 0, 0, 1);

replace with

$editorid = construct_edit_toolbar($itrader['message'], 0, itrader, 0, 1);

Sorry for my bad english.

[Jah-Hools]

Hi

I am using Itrader

I just have the Itrader link visible in the classifieds forum

But

I would like it visible in the User Profile page (when someone sends you a PM you can access their Itrader status)

and

When you get a PM from someone

Any tips on how to do that?

Many thanks!

[ogameclub]

After installing Database error was. My site completally closed by database error.

This hack was damaged session and cpsession tables.

and.. uninstalled.

[soundbarrierpro]

Hi

I am using Itrader

I just have the Itrader link visible in the classifieds forum

But

I would like it visible in the User Profile page (when someone sends you a PM you can access their Itrader status)

and

When you get a PM from someone

Any tips on how to do that?

Many thanks!

https://vborg.vbsupport.ru/showthread.php?t=178158&highlight=itrader

[civilwarfish]

I know this was done already but I cant seem to grasp it.

I have installed iTrader and cannot figure out how let users post feedback. I know the link to it, but how do I allow the users to select it for their needs?

[Wabuf]

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.



Easiest way without modifying the code would be to just remove those options in the template where they input a rating.

Works like a charm! BTW for those like me who had problems figuring it out (had to read the entire thread to find it out)
Add this to your config.php file at the bottom:
$config['Misc']['debug'] = true;

That will enable the "debug" mode and then you'll get the options the OP was talking about. Otherwise you'll circle around and say "huh? That's not in there!" lol thanks to whoever posted that :)

Also if you get an error saying it can't find the local file, just upload your XML file to includes/XML/ directory and import that way, it'll save you that hassle too.

[C.Whyte]

AWESOME! Great hack indeed. Marked as installed. Thx!

[Digital Jedi]

I know this was done already but I cant seem to grasp it.

I have installed iTrader and cannot figure out how let users post feedback. I know the link to it, but how do I allow the users to select it for their needs?

If you made the template edits to your postbit/postbit_legacy template, then all they do is click on the link for that user and it takes them to their feedback page.

[civilwarfish]

If you made the template edits to your postbit/postbit_legacy template, then all they do is click on the link for that user and it takes them to their feedback page.

Yes...and that works just fine...but how can they LEAVE feedback for any given user? There is no link for users to get to itrader_feedback with the proper extension for the user desired....

How can I attach this to the proper place so they can actually use the program?

[Patrick Simmons]

If you made the template edits to your postbit/postbit_legacy template, then all they do is click on the link for that user and it takes them to their feedback page.

I don't see any of these files uploaded on my FTP. Can someone help me out?

[MagnetiCat]

Patrick, postbit and postbit_legacy are templates. Templates are edited through the Style Manager in your vBulletin Control Panel. Go there, then Style Manager, then search those templates and then edit them.

Styles and Templates (http://www.vbulletin.com/docs/html/styles_and_templates)

[MagnetiCat]

Hi

I am using Itrader

I just have the Itrader link visible in the classifieds forum

But

I would like it visible in the User Profile page (when someone sends you a PM you can access their Itrader status)

and

When you get a PM from someone

Any tips on how to do that?

Many thanks!

In VB 3.7, just import this simple product: https://vborg.vbsupport.ru/showthread.php?t=178158

[Digital Jedi]

Yes...and that works just fine...but how can they LEAVE feedback for any given user? There is no link for users to get to itrader_feedback with the proper extension for the user desired....

How can I attach this to the proper place so they can actually use the program?

You mean to tell me when you click that link, the Submit Feedback for [username] doesn't appear in the iTrader profile? (Note that this link won't appear when viewing your own profile.)

http://img167.imageshack.us/img167/9963/tempdd7.jpg

[keith455]

vBulletin 3.0.x -> 3.5.x Upgrade Instructions:

If you previously were using Trader Ratings 1.2.0 on your vB 3.0.x forum and still have all your rating data, you can do a simple upgrade to the new system.

1. Do a new install as per the ALL the instructions above, EXCEPT leave the iTrader system CLOSED (meaning set the "iTrader Active" option to "No").
2. Upload the itrader_upgrade.php file located in the "Extras/admincp" directory to the admincp directory on your server.
3. Login to your admincp and enter the URL to the itrader_upgrade.php file. Follow the instructions carefully!
4. That's it! Verify your data imported successfully and then set the "iTrader Active" option to "Yes" to open the system.


The itrader_upgrade.php wasn't in the zip file so none of the old ratings are there. Everything else seems to have worked fine.

[Shmaba]

For some reason, it shows I trader on my backend but nothing is appearing on the forum by our names on anyones? What could be wrong?

[TimberFloorAu]

We have this Uninstalled, but read the readme.


New Installation Instructions:

Please follow the following steps IN ORDER, otherwise the install will not work properly and I will not even bother to reply to any of your help requests.

1. Upload ALL the files in the "Upload" directory, including the sub-directories!
2. Install the iTrader Product via the Plugin Manager. The XML file is located in the "Product XML" folder.
3. Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.
4. Edit your iTrader options in the vBulletin Options menu. They will be listed at the bottom of the page in their own group.
5. Edit your templates, more info can be found in the Template Info.html file.
6. That's it, your iTrader system should be up and running!

[realmr]

Can we use the vb credits to exchange as the points for trading ?

[keith455]

The itrader_upgrade.php wasn't in the zip file so none of the old ratings are there. Everything else seems to have worked fine.

anyone have this file? or just the code to import the data from trader ratings.?

[cookiepants]

Wonderful, thank you!

I'd like to post a "Click here to leave me iTrader feedback" in each person's postbit. What code would I use?

Thanks!
Meg

[Digital Jedi]

Wonderful, thank you!

I'd like to post a "Click here to leave me iTrader feedback" in each person's postbit. What code would I use?

Thanks!
Meg
It's in the file that has the template edits.

[zikuta]

Is the author still working on the mod? any issues with vBulletin 3.7.3 or vBSEO 3.2.0?

[soundbarrierpro]

Is the author still working on the mod? any issues with vBulletin 3.7.3 or vBSEO 3.2.0?

Yes he is, and no there isn't. Working like a charm.

[keith455]

I got it to work.. heres the sql i used. I hope it can help someone else.
INSERT INTO itrader SELECT userrateid as rateid, userid, rateduser as rateduserid, userrating as rating, userbuysell as buyselltrade, usercomments as subject, userurl as dealurlpopulation, userdate as dateline, '0.0.0.0' as ipaddress FROM user_rate_trade;

[MuGiSouL]

thank you.

[RedFoxy]

that's a really good mod, but i need 2 features:

1) I nedd that iTrade don't send me an e-mail for the troubles with the rates, but that it write a new thread in a specified forum, with that features, all my moderator and admins can look and fix troubles, suspicious and negative rates!

2) i need to add rates arbitrary from the ACP, to add the old feedback that i've in a forum

thank's for all ;)

[12forums]

Can someone help me here since I don't know nothing about codes and so on??????????

This is in the manual::

Template Instructions:

Two fields are added to the "user" table to facilitate rating usage pretty much anywhere you please within the forum. The two fields are:

* itrader_total - iTrader Score (stored as an integer)
* itrader_pcnt - Percent Positive Feedback (also stored as an integer)

Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

Additionally it would be wise to have some sort of link that is easily accessible to your members so they can view their own ratings. My suggestion would be to add some code in the navbar or usercp menu somewhere. If no userid is specified then the system defaults to the user's own iTrader page.

<a href="itrader.php?$session[sessionurl]">iTrader</a>

Use your imagination where you want these links to be visible, there's nothing set in stone where it should be display or how it should look. Some people wanted the percent score so I added in this version. You can get creative and use some stars or something based on their score or positive ranking.

Please tell me in detail what I have to do?
Thanks

[Digital Jedi]

It already does. You have to decide where you want to put the blocks of code, and which one's you want to use. It recommends your MEMBERINO, postbit or postbit_legacy templates. If you don't know what those are then you need to review the manual on editing templates: http://www.vbulletin.com/docs/html/stylemanager_edit_templates

If you don't know any HTML at all, then your going to to have to let us know where you which type of link you want and where you want it, so we can tell you what to look for and where to put it. (And I'd recommend learning basic HTML, which is not too difficult to pick up with a Google Search, and essential for administrating vBulletin.)

[Zilvia]

Is this Plugin dead? Im on the fence about installing it... My forum really needs something like this.

[Digital Jedi]

What do you mean by "dead"?

[Shazz]

What do you mean by "dead"?

Unsupported

[Digital Jedi]

It's an interim release to hold us over until the full version is finished. So yeah, it's unsupported, but it works. Jason is just reserving the right to finish the full version on his own time.

[12forums]

I really don't know where to edit the templates! I don't know nothing about templates editing.
Can someone help me do it so I can continue working on my forum?

This is in the manual::

Template Instructions:

Two fields are added to the "user" table to facilitate rating usage pretty much anywhere you please within the forum. The two fields are:

* itrader_total - iTrader Score (stored as an integer)
* itrader_pcnt - Percent Positive Feedback (also stored as an integer)

Most likely you will want to add the score info to the postbit and/or postbit_legacy template(s), MEMBERINFO, and memberlist_resultsbit template. Actual placement and style is entirely up to you, however here's a sample to get you started. Note that the MEMBERINFO & memberlist_resultsbit templates won't need the conditional around the text since you can't view a "guest" in those cases.

<if condition="$post['userid']"><div>iTrader: (<b><a href="itrader.php?$session[sessionurl]u=$post[userid]">$post[itrader_total]</a></b>)</div></if>

Additionally it would be wise to have some sort of link that is easily accessible to your members so they can view their own ratings. My suggestion would be to add some code in the navbar or usercp menu somewhere. If no userid is specified then the system defaults to the user's own iTrader page.

<a href="itrader.php?$session[sessionurl]">iTrader</a>

Use your imagination where you want these links to be visible, there's nothing set in stone where it should be display or how it should look. Some people wanted the percent score so I added in this version. You can get creative and use some stars or something based on their score or positive ranking.

Please, can you tell me in detail what I have to do or what you did?

Thanks in advance,
Amro

[12forums]

Can someone help me with the post I made above this one?

I highly appreciate it.

Thanks,
Amro

[soundbarrierpro]

PM me. I'm hitting the hay, but I'll help you all day tomorrow. You'll be a template editing whiz by the mid day. I'm eastern standard time and am in work by 7:30 am. I'll be glad to walk you through it.

[Digital Jedi]

There's also a very good explanation of templates and how to edit them in the docs: http://www.vbulletin.com/docs/html/templates_intro

[Cash2Paypal]

Love the iTrader but is there a way to raise TR? If I want to offer new members to keep a TR from another forum.. is there a way to edit the TR and it stay? or a table I can inject into the mysql? Anything?

[shavedaccord]

I am getting this at the top of my Members List now..

iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()
iTrader: ()

[soundbarrierpro]

I am getting this at the top of my Members List now..

That's because you dropped the variable in the wrong place. Try moving it around and dropping it wherever in the memberlist template. Just save and check, save and check until you find it's where you want it.

[graham_w]

Hi all, got the itrader info into my memberlist - but im just trying to figure out how to sort the itrader_total into order in the members list much the same as you can sort the posts. I've tried a few things but couldn't get it to work.

The posts sort in memberlist is this :

<if condition="$show['postscol']"><td class="thead" nowrap="nowrap"><a href="$sorturl<if condition="!$show['sorturlnoargs']">&amp;</if>order=DESC&amp;sort=posts&amp;pp=$perpage$usergrouplink">$vbphrase[posts]</a> $sortarrow[posts]</td></if>

so I tried setting the itrader to be this :

<td class="thead" nowrap="nowrap"><a href="$sorturl<if condition="!$show['sorturlnoargs']">&amp;</if>order=DESC&amp;sort=itrader_total&amp;pp=$perpage$usergrou plink">$vbphrase[itrader]</a> $sortarrow[itrader]</td>

The numbers display fine but the sort doesnt seem to recognise itrader_total and won't sort it in order. Anyone able to assist ?

[StreetTriple]

hi there,

i have try install this on my 3.6.8 but the xml wasn't done....

can anyone help me?

[shavedaccord]

Not sure if this is the place to ask but the other itrader thread is unsupported and your website is not up yet.

I'm having an issue with one particular users itrader rating not displaying properly. They have 5 positive transactions but their rating is only "4" while other users with 5 positives have a rating of 5.

[Digital Jedi]

hi there,

i have try install this on my 3.6.8 but the xml wasn't done....

can anyone help me?
What do you mean by, the XML wasn't done?

[harshvfx]

How can you edit ones trades? I would like to give people a certain amount of trade rating? Is this possable? And how do I take away.

[jamesta1221]

please help, how do you do this step

Two fields are added to the "user" table to facilitate rating usage pretty much anywhere you please within the forum. The two fields are:

itrader_total - iTrader Score (stored as an integer)
itrader_pcnt - Percent Positive Feedback (also stored as an integer)

[shavedaccord]

Not sure if this is the place to ask but the other itrader thread is unsupported and your website is not up yet.

I'm having an issue with one particular users itrader rating not displaying properly. They have 5 positive transactions but their rating is only "4" while other users with 5 positives have a rating of 5.

Can anyone help me with the above issue? It's starting to be a good sized problem on my forum. Transactions between people rely heavily on their iTrader ratings.

[Keyser S?ze]

i have it set to active, but in the forums it says "currently closed"

[Digital Jedi]

i have it set to active, but in the forums it says "currently closed"
This is addressed in some of the earlier posts in the thread.

[Keyser S?ze]

This is addressed in some of the earlier posts in the thread.

well since their are like 16 pages wouldnt it be nice to just answer it, or say what page

[Digital Jedi]

well since their are like 16 pages wouldnt it be nice to just answer it, or say what page
When I say "earlier posts" I mean the answer is on the first couple of pages.

[shavedaccord]

Not sure if this is the place to ask but the other itrader thread is unsupported and your website is not up yet.

I'm having an issue with one particular users itrader rating not displaying properly. They have 5 positive transactions but their rating is only "4" while other users with 5 positives have a rating of 5.

Again... someone please help.

[King Justice]

So this iTrader version doesn't seem too good...why don't we just stick to the old one?

[Digital Jedi]

This version works fine, and the old one is in the Modification Graveyard.

[CarterMarkham]

I am not having any problems, 3.7.3

[Jah-Hools]

Hi

I would like to have iTrader ratings and link to be displayed.

1) In just the classifieds forum (I have got that going, working fine)
2) On member profile pages
3) On PM messages (I am not 100% sure on this and I could live without it if its to much of a pain to manage)

Do you think all that is do-able?

I would ask my web tech to code it

But just wanted to check beforehand in case it was not possible or a bad idea..

Many thanks VB comrades :up:

[Puntoboy]

Well, if indeed iTrader is set to "open" in your vB Options, then there is probably a version mismatch somewhere. In the new release I've coded it to be a bit more explicit if there is a file vs DB difference, but with this (and previous releases) it just says closed to prevent any issues. I'm assuming you chose the overwite option when you updated? Make sure you are using all the latest files.

Last thing to check would be to enable debug mode on your forum (probably best to close the forum temporarily). Go to your vBulletin Options -> Version Info and Other Untouchables. Then look for iTrader Version Number, it *should* be 2.1.0, if it's not then click the 'edit' link and under the "Default" field change it to 2.1.0 and make sure the Data Validation Type is set to "Free".

If none of that works, let me know, but one of those has to be the problem.



Easiest way without modifying the code would be to just remove those options in the template where they input a rating.

Fixed my problem on 3.7.3 PL1 perfectly!

[Puntoboy]

Hi

I would like to have iTrader ratings and link to be displayed.

1) In just the classifieds forum (I have got that going, working fine)
2) On member profile pages
3) On PM messages (I am not 100% sure on this and I could live without it if its to much of a pain to manage)

Do you think all that is do-able?

I would ask my web tech to code it

But just wanted to check beforehand in case it was not possible or a bad idea..

Many thanks VB comrades :up:

Yes this is possible as I have it on my forum version 3.5.7. (pre upgrade) I can't remember the exact code but it is possible.

[Zilvia]

I have the following disabled:

Contact Staff On Suspicious Activity?
and
Contact Staff On Negative Rating?

yet me and my staff receive about 10-30 emails per day with Negative ratings and suspicious activity.

Can anyone help us with this problem? Its getting real old for everyone :(

[luket79]

I would also like to display iTrader in profiles. How can this be done?

[Digital Jedi]

I have the following disabled:

Contact Staff On Suspicious Activity?
and
Contact Staff On Negative Rating?

yet me and my staff receive about 10-30 emails per day with Negative ratings and suspicious activity.

Can anyone help us with this problem? Its getting real old for everyone :(
Check your settings and increase the number of ratings people are allowed to give in a specified time.

I would also like to display iTrader in profiles. How can this be done?
Do a "Titles Only" search for iTrader Stats Member Profile.

[soundbarrierpro]

search for "itrader" in title only. This and the profile mod will come up.

[soundbarrierpro]

Wow, we posted almost exactly the same time :)

[Zilvia]

Check your settings and increase the number of ratings people are allowed to give in a specified time.
[/I].

I changed that, and still get both emails.

[Disasterpiece]

Hi

Great Mod, but i have a few Problems ;)

1. Upload ALL the files in the "Upload" directory, including the sub-directories!
done.
2. Install the iTrader Product via the Plugin Manager. The XML file is located in the "Product XML" folder.
done.
3. Edit all the usergroup permissions (all groups default to no access). The iTrader permissions will show up at the bottom of the list.
errr... they don't show up anywhere oO

i use vb 3.7.3 with PHP@SafeMode but this really shouldn't be the problem.

Do you need more info? If yes, what else?

Would be kind to help me out with this, thanks!

[heatherw610]

I have this on my forum and whenever one person leaves feedback for more than one transaction, their score will only go up by one. How can I make EACH feedback raise the score?

[Shazz]

I have this on my forum and whenever one person leaves feedback for more than one transaction, their score will only go up by one. How can I make EACH feedback raise the score?

Customizing it, not a default option

[TFEX]

I think heather understands that Shazz, I believe she's asking how to customize. Any ideas on where to start? I'm interested in making this change as well.

[rob01]

i have a question, how i use this mod?, i can see the feedback webpage, but how i see the trading website?
:S

[ABDALWAHID]

Hi,

I have updated and

The iTrader system is currently closed.



:(

regard

[ABDALWAHID]

Hello my problem is ended.

If anyone has this problem ...

First, take a backup for 2 table "iTrade" and "itrader_comments."

Uninstall it and plug-in, then reinstall it.

They all finished setting and try it.

If everything in order to restore its backup.

And last, make them play from admincp "update users iTrade scores"

that was all.

Regard