Advertisement System V2.6 Aka Ad Management

[karim004]

Many forums are using the Ad management system, however the coder has stopped supporting the script. Therefore I have decided to release this modification. I will give support to those who need it and continue to make updates to the system.

====>> Live Demo (http://www.momsasone.com/forum)
The Advertisement System was designed with the intent that anyone with any level of experience could use the system. It is easy to install and once installed, the templates are easy to use on a site. The advertisement system has several features that sites will enjoy such as it can be used on versions 3.6.x as well as 3.7.x. The ads can be placed in the following areas: header , footer , below whats going on, below the navbar , postbit , postbit legacy, pms, announcement, archive, left & right column in forum home , left column in member info and full page , threadbit , as well as forumbit. Also, the ability to not display advertisement on certain pages such as login, registration & the search page. This system allows you to personalize the system to better suit their needs such as setting permissions like ads after first post on a page, ads after last post on a page, ads after X post on a page, and ads every X posts on a thread. You may also display ads by forum ID, as well as customize the full page for your site. The system comes with a feature for auto refresh ads as well as Google analytics. Besides the features,there is constant support given to those who need it and of course, updates are made to the system in order to better serve the sites using the system.

10/15/2008 version 2.6

** ability to tun on /off the autorefresh : check the screen below
https://vborg.vbsupport.ru/external/2008/10/29.jpg
Yes : will enable the autorefresh
No : will enable a simple rotation
** fixed 2 bugs in [left & right column ]
*******************



Features :
* works for v3.7.x and also v3.6.x
*advertisement in header , footer , below whats going on ? , below the navbar , postbit , postbit_legacy , pms , announcement , archive , left & right column in forumhome , left column in memberinfo and full page , threadbit , forumbit
* flash rotation
* do not display advertisement on certain pages Such as login , register & search
* google analytics
* permissions by area : display advertisement or not for usergroup x in :
... area 1 : header , footer
... area 2 : navbar , left & right column
... area 3 : forumbit & threadbit
... area 4 : postbit,postbit legacy , pms & announcement
* for postbit & postbit_legacy you have the ability to set more permissions like :
.... ad after first post on a page
.... ad after last post on a page
.... ad after X post on a page
.... ad every X posts on a thread
.... Minimum thread postcount
.... Maximum user postcount
..... Display Advertisements as User
*** Full Page
****Auto refresh ads
Please remember to click Mark as Installed if you use this modification.
Support questions from members who have not marked this as installed will be considered low priority.

[karim004]

Enable advertisements system in your forum?
go to admincp , vbulletion options , Advertisement System (Settings & Slideshow) and yes to Enable advertisements system in your forum
Enable advertisements system in header ,footer , below whats going on and .................
Example header :
go to admincp , vbulletion options ,Advertisement System (Header & Footer)
yes to Enable header advertisements in the main forum
Choose Yes to enable header advertisements in your archives.
if you want use simple rotation
chose yes to enable ads rotation in header ( you must disable auto refresh ads )
if you want use auto refresh
chose yes to enable autorefresh in header ( you must disable ads rotation )
permission :Display advertisements to Usergroups:
if you want display ad for all usergroups leave both box empty
if you want display ad for x usergroups enter the usergroups id for those groups Sperated by |
Example :
2|5|6|7

if you have a vip group and you wont display ad for them in 2nd box enter id for this group(s)
example
8|9|10
Rotation :
to use the rotation you must enter you adcode Sperated by |
example :
<a href="link1"><img src="banner1"></a>|adsense code <a href="link1"><img src="banner1"></a>|flash banner code
Auto Refresh time :
to change the time edit the 3 php files : autorefresh_header , autorefresh_footer , autorefresh_navbar
content="10" means auto refresh after 10 secondes

[KURTZ]

wow, it seems an excellent job Branden ... :)

just marked ;)

[myown]

thanks for it, but is this cmpatible with old system or not ?

[auctionguy]

This looks amazing! Just what I needed. Thanks!

[GoTTi]

great. been waiting for this. so the rotation of the ads work finally?

[asawr10]

thanks

[iogames]

Confusing but thanks... I've been waiting for months for Tyger to come back but he disappeared :eek:

Does it works for 3.6.10?

[GoTTi]

um...this mod is nothign like the previous mod...trying to figure it out ;/

[GoTTi]

wait a sec............................................

in the previous ad manager system, you would add ad codes like:

AD CODE 1 |AD CODE 2 | AD CODE 3

and that would rotate the ads on refresh. the only thing not working was the auto refresh option. so with this mod here, to use the auto refresh option, we have to use images only? we cant use a java script code for the ad like a google adsense ad or something? and seperated by | or whatever we define to be the seperators?

[tekguru]

Bad news for me if one can't use Google Adsense and the | as a seperator. Can anyone confirm if that ability is gone?

[fluentdesigns]

Ya this one is a bit different then vbadmanagement. For vbadmanagement you were able to enter code for example from OpenX into each banner spot in the forums so that way I could have different zones setup in OpenX and track how many clicks each zone was getting and see what ads do better then others. Maybe this coder will add this ability as well?

[tekguru]

Hmm, no good for me then as for example in the postbit I rotate:

1) Google Adsense - standard text banner
2) Google Adsense - Links text banner
3) Advertiser 1
3) Advertiser 2
3) Advertiser 3

All via either adsense code or HTML, and if it can't handle that it is no good for me.

I bought GAB and tried using that but it takes too many resources.

[redlabour]

Missing Ads for the Archive

[Hornstar]

this is a fantastic start tho, and looks very promising already.

[Chance4Today]

I thought it would be easy to do and I followed the directions and nothing is showing up any ideas?

[redlabour]

Add The Green Code Below To Get The Banner Rotation. Next, just Change Full Link For Banner & Full Link For website with your banners links&the websites links. If you want to use the rotation for more than 3 websites, then add myimages[x]="bannerlink" slinks add imagelinks[3]="websitelink" x=the banner&website ordre 4,5,6......:
Edit The Links For Images&LinksThen Copy & Paste :



//Edit Then Copy&Paste This Code
myimages[1]="Full Link For Banner1"
myimages[2]="Full Link For Banner2"
myimages[3]="Full Link For Banner3"
//specify corresponding links below for your banners
var imagelinks=new Array()
imagelinks[1]="Full Link For website1"
imagelinks[2]="Full Link For website2"
imagelinks[3]="Full Link For website3"


???

Anyone understands this ???

Does this mean:

http://*.jpg=http://www.test.de

or

http://*.jpg[1]="http://www.test.de"

or

http://*.jpg[1]="http://www.test.de1"

??

And by the Way - if you give the Option for a Postbit Rotation - where is the Option after which Post this has to happen?
I cant see anything in Postbits - but under Navbar and Footer it works.

BTW - rename "GoogleAdSense" Option to "Activate Script or other Banners". I am using Amazon and it works.

And last but not least - missing the Full Page Advertisement after X Post very hardly. :(

[NoCo7]

Indeed be nice to setup Zones again using OpenX :)
Good to see someone taking the initiative though to bring back, & support a well needed and used plugin.

[auctionguy]

I just tried the banner rotation on one of my sites and I love it in 3.7 !

I am going to mess with the postbit stuff next.

Awesome hack so far though!! Thanks!

[karim004]

???

ok here is a exp if you want add a rotation for vb.org , vb.com & google.com
vb.org : website = http://www.vbulletin.org banner=https://vborg.vbsupport.ru/images/cstyle/blue/vblogo.gif
vb.com : website= http://www.vbulletin.com banner=http://files.vbulletin.com/images/logos/vbulletin3_logo_white.gif
google : website=http://www.google.com banner=http://www.google.com/intl/en_ALL/images/logo.gif

the rotation code is :

myimages[1]="https://vborg.vbsupport.ru/images/cstyle/blue/vblogo.gif"
myimages[2]="http://files.vbulletin.com/images/logos/vbulletin3_logo_white.gif"
myimages[3]="http://www.google.com/intl/en_ALL/images/logo.gif"
//specify corresponding links below for your banners
var imagelinks=new Array()
imagelinks[1]="http://www.vbulletin.org"
imagelinks[2]="http://www.vbulletin.com"
imagelinks[3]="http://www.google.com"

And by the Way - if you give the Option for a Postbit Rotation - where is the Option after which Post this has to happen?
I cant see anything in Postbits - but under Navbar and Footer it works.
for the option after which post i am gotta add it to v1.1 (( this week end ))
can you see them in default style ?


BTW - rename "GoogleAdSense" Option to "Activate Script or other Banners". I am using Amazon and it works.
oh thank you that s a great news . i will rename the option this week end (( in version 1.1 ))

And last but not least - missing the Full Page Advertisement after X Post very hardly. :(
dont worry i am gotta add this options to next version 1.1 should be ready saturday or sunday :
Random Activate Script : google adsense , amazon ....
full page
ads after x post in postbit
auto refresh .

[redlabour]

for the option after which post i am gotta add it to v1.1 (( this week end ))
can you see them in default style ?

No sorry.

And all i am missing now is the Option to show Ads in Archive. ;)

[adblaze]

I got this installed and I'm having some problems. No changes are needed to templates correct? The only place I got this to work was in the footer start. Any tips?

http://forum.iphonegeek.mobi/general-dicsussion/

Here is what I have for my rotation code:

//Edit Then Copy&Paste This Code
myimages[1]="http://www.iphonegeek.com/images/banners/728_90_1.gif"
myimages[2]=http://www.iphonegeek.com/images/banners/728_90_2.gif"
//specify corresponding links below for your banners
var imagelinks=new Array()
imagelinks[1]="http://www.iphonegeek.com"
imagelinks[2]="http://www.iphonegeek.com"

[BigJimTheLug]

Good start.
Can it be setup so that it has a Google Adsense Revenue sharing option?

Can you include this in your next release?
Thanks.

[karim004]

Good start.
Can it be setup so that it has a Google Adsense Revenue sharing option?

Can you include this in your next release?
Thanks.
maybe in next version because tonight or tomorrow i am gotta post a new update with :

* Permission / usergroups& userid for each section{header , footer , postbit ,archive }
* Full page
* Rotation for Other Banners like adsense , amazon .....
* Ads after x post
* SlideShow For Banners (where you can control the speed & banner size ))
* Ads In Archive
I got this installed and I'm having some problems. No changes are needed to templates correct? The only place I got this to work was in the footer start. Any tips?

http://forum.iphonegeek.mobi/general-dicsussion/

Here is what I have for my rotation code:

you dont have to edit the templates try this :
first here is the ads locations :
styles manager / Ad Location Templates
ad_footer_end = above vbulletin copyrith
ad_footer_start = below what s going on
ad_forumdisplay_afterthreads= forumdisplay
ad_header_end = header betwen logo & navbar
ad_navbar_below = below navbar

if you cant see the ads in any of this places just revert the template exemple if you cant see the ads in header , footer end , footer start , above navbar ...then revert there templates

if you want center the ads in header, below nabar & footer :
for header open your header and center :

$ad_location[ad_header_end]
Footer center :

$ad_location[ad_footer_end]
Below Navbar Center :

$ad_location[ad_navbar_below]

[redlabour]

maybe in next version because tonight or tomorrow i am gotta post a new update with :

* Permission / usergroups& userid for each section{header , footer , postbit ,archive }
* Full page
* Rotation for Other Banners like adsense , amazon .....
* Ads after x post
* SlideShow For Banners (where you can control the speed & banner size ))
* Ads In Archive

I hope you mean

*Full page after x post ;)

[iogames]

Congrats for your decision and work, the other hack is almost dead and I really like this... but I will stay in 3.6.10 for a while, can you confirm me if it works with it?

[swatkins]

Thanks for your hard work,, I will download it as soon as you post the 1.1 version....

[T.S.]

Postbit ads do not show up for me with the legacy verticle style postbit, only the newer horizontal style one. Any chance it could be fixed to work with both?

[Wizardjv]

If still taking request would be nice to be upload the banners via the panel like the banner rotator..Also if could add options to use it with Vbadvanced..Like put seperate ads on the homepage ...But this is very nicely done...Thanks so much for the mod :)

[redlabour]

Anything new about the Update?

[karim004]

05/15/2008 Version 1.1
*******************
* Banners & Ads In post_legacy
* Banner After x post
* Full Page
* and the great option is the slideshow : you can control the speed , pause time , force size
Live Demo for slideshow and full page Click Here

[redlabour]

Argh - more Failures then in 1.0:


You did not renamed "Google Adsense" to Ad-Script?s
Still the same Terrible format of own Codes
Useless Full-Page because after X Posts is missing


As long as you did not implement a useful Codedesign i will uninstall. :down:

Take the Codedesign from vBAdManagement or something else useful forget it.
Or give us a useful Instruction.


//Edit Then Copy&Paste This Code
myimages[1]="Full Link For Banner1"
myimages[2]="Full Link For Banner2"
myimages[3]="Full Link For Banner3"
//specify corresponding links below for your banners
var imagelinks=new Array()
imagelinks[1]="Full Link For website1"
imagelinks[2]="Full Link For website2"
imagelinks[3]="Full Link For website3"

slideshowcontent[0]=["banner1_link", "website1_link", "_new"]
slideshowcontent[1]=["banner2_link", "website2_link", "new"]
slideshowcontent[2]=["banner3_link", "website3_link", "new"]

What the Hell means "_new" and did we need these " Signs?

What?s the problem to make it work like this simple Design:

<img src="http://www.politikstube.de/banner/externe/israel-heute.jpg" border="0" alt="Israel Heute"></img></a>|<a href="http://www.morethandreams.tv/"
target="_blank"><img src="http://www.politikstube.de/banner/externe/mtd.gif" border="0" alt="More than Dreams"></img></a>

and so on ....

And who needs Full-Page Feature if you forget the Full-Feature after X Posts????

I remembered you 4 Times in our PM Discussion.

Sorry Guy - this release is not what you have told me and other to be released.

[iogames]

I know this Mod will keep growing and growing, but does it work for 3.6x

[redlabour]

I know this Mod will keep growing and growing, but does it work for 3.6x

For 3.6 use vBAdManagement 4. (https://vborg.vbsupport.ru/showthread.php?t=131150&highlight=vBAdManagement)

[karim004]

Argh - more Failures then in 1.0:


You did not renamed "Google Adsense" to Ad-Script?s
Still the same Terrible format of own Codes
Useless Full-Page because after X Posts is missing


As long as you did not implement a useful Codedesign i will uninstall. :down:

Take the Codedesign from vBAdManagement or something else useful forget it.
Or give us a useful Instruction.


//Edit Then Copy&Paste This Code
myimages[1]="Full Link For Banner1"
myimages[2]="Full Link For Banner2"
myimages[3]="Full Link For Banner3"
//specify corresponding links below for your banners
var imagelinks=new Array()
imagelinks[1]="Full Link For website1"
imagelinks[2]="Full Link For website2"
imagelinks[3]="Full Link For website3"

slideshowcontent[0]=["banner1_link", "website1_link", "_new"]
slideshowcontent[1]=["banner2_link", "website2_link", "new"]
slideshowcontent[2]=["banner3_link", "website3_link", "new"]

What the Hell means "_new" and did we need these " Signs?

What?s the problem to make it work like this simple Design:

<img src="http://www.politikstube.de/banner/externe/israel-heute.jpg" border="0" alt="Israel Heute"></img></a>|<a href="http://www.morethandreams.tv/"
target="_blank"><img src="http://www.politikstube.de/banner/externe/mtd.gif" border="0" alt="More than Dreams"></img></a>

and so on ....

And who needs Full-Page Feature if you forget the Full-Feature after X Posts????

I remembered you 4 Times in our PM Discussion.

Sorry Guy - this release is not what you have told me and other to be released.

hi redlabour;
first dont forgot we talking about v1.1 so still more updates i cant get everything done in 2 days !
for the codes i change them to a easy one and it works for both ads regular banners and other like adsense amazon ..... but i am still testing stuff i wont relase a beta version and maybe can damage your website i want make sure first everything it s ok before i give to poeple .


for "_new" it s target=_blank to open all ads in a new window and poeple cant leave your website so what the prb with that you can change it to target=_blank !

for the postbit i think you said you want control the placement of ads in postbit and postbit_legacy and i did there is a option in admincp to show ads after x post ! and believe me i was working yesterday till 3h00 am to do it for you .

for the install i swear i dont care i want just share this mod with poeple because there is no moread managemnt for vb3.7
I know this Mod will keep growing and growing, but does it work for 3.6x
i think so . if not you have to add the codes in your templates

[redlabour]

for the postbit i think you said you want control the placement of ads in postbit and postbit_legacy and i did there is a option in admincp to show ads after x post ! and believe me i was working yesterday till 3h00 am to do it for you .

Thanks - but we talked about the 'after X' Posts Feature for Postbit and the Full-Page Ads.

;)

Example - User hits 50 Links at the Forum he will see the Full-Page Ad with a Countdown to redirect him to the last Link he want to.

[invisiblea]

And You wrote b4 in your futures for 1.1 mod that you'll add features like forum id, usergroup id to show ads only to them.

Its not there :(

[Paul M]

When posting replies, please remember that modifications are provided free of charge, and written in a coders free/spare time. Thank you.

[tekguru]

So is the adsense script handling option now working?

[D.Baker]

Hey Guys,
Forgive me for being a complete n00b, but I am new to this whole vBulletin board thing. I understand PHP OK, and HTML/CSS very good so I think I can catch up pretty quick and will hopefully be contributing back soon enough.

Anyway, I have my board setup (I turned on plugins) and would like to install this plugin/product (which is it?). I uploaded ads.php into my forum root (mydomian.com/forums/) and imported product-advertisement_.xml through the product manager. If that's the correct thing to do, now what?

I can't seem to find the advertisement admin panel as shown in the screenshots so I think I may have done something wrong. Can I even get to that admin panel through my admincp? Or is a different thing altogether. Like I said, I'm a complete n00b, sorry and thanks.

[karim004]

So is the adsense script handling option now working?

i am gotta relase today a new update with the options i forgot yesterday :

1= rotation for google adsense , amazon and others
2= a easy code for the rotation and you can add both banners {{ images+link & script:adsense , amazon.... }} in same table

3= if i have time the permissions/section & Archive

for redlabour i am still testing the after X' Posts Feature for Postbit and the Full-Page Ads. and i changed the adesnse title for you .


Hey Guys,

Anyway, I have my board setup (I turned on plugins) and would like to install this plugin/product (which is it?). I uploaded ads.php into my forum root (mydomian.com/forums/) and imported product-advertisement_.xml through the product manager. If that's the correct thing to do, now what?

I can't seem to find the advertisement admin panel as shown in the screenshots so I think I may have done something wrong. Can I even get to that admin panel through my admincp? Or is a different thing altogether. Like I said, I'm a complete n00b, sorry and thanks.
Admincp , vBulletin Options , Advertisement System :: ForumDisplay & Full Page

[Pocket Aces]

When posting replies, please remember that modifications are provided free of charge, and written in a coders free/spare time. Thank you.
People nowadays seem to forget this fact.
Anyway, its good to know and im thankful that someone has started a new ad management for 3.7. Im looking forward for the interesting updates in the future. *Bookmarked*

[karim004]

Argh - more Failures then in 1.0:



And who needs Full-Page Feature if you forget the Full-Feature after X Posts????

I remembered you 4 Times in our PM Discussion.

Sorry Guy - this release is not what you have told me and other to be released.
hi redlabour
i just find out i included this option in v1.1 and it s not done yet

try set ads after x posts to 3 and enable the banner rotation/postbit after that post 6 posts and you will see the full page page with a ad from the postbit banners roration but i didnt finish yet the option because i must add the back redirection to your last post

i am working on it now .

[TheInsaneManiac]

I will not install this until the following issues are fixed:
1.) Usergroup permissions (I have VIP which see no ads)
2.) The footer on many websites that use this get an extra break in it.
3.) Fix the position on the credits (TZ appears below the footer on the dark_vb style.

[blindmedia ltd]

ive given up on this one now ive been tying for days to get this working ive followed all of the info in this thread and no matter what i do the ads still do not show up.

i have tried to do this with both the default vbulletin style thats standard in vbulletin and also with my customised themes but it will not do anything full stop

im using vbulletin 3.7.0

[D.Baker]

Hey Karim004,
Thanks for the help, I have it working now. I have a suggestion, although I think you are already working on it judging by your last post, but here it is anyway.

You could simply get rid of the different type of ad (eg. Adsense, Amazon etc) and just have the one box that allows you to put in any code. Allow the end user to specify a code separator (eg. ***CODE***) that allows your plugin to determine which code to use when displaying random banners. I would imagine this would be much easy to code for you, rather than having to cater to all these different ad types.

This is exactly what the plug in "Who Sees Ads (http://planetozh.com/blog/my-projects/wordpress-plugin-who-sees-ads-control-adsense-display/)" for Wordpress does, and it won awards. This would make the whole thing much more intuitive and allow complete control for ads. If you need some more information about Who Sees Ads, I am using it on my Wordpress Install and can help.

Otherwise, this seems to be the best for vBulletin and we should all be thanking you for your hard work.

[redlabour]

Ok thanks for your Work - and my last Request since all others are in progress - please don?t forget the Archive Ads. ;)

[karim004]

05/18/2008 Version 2.1
*******************
1= rotation work now for both banner (image+link ) and other scripts like google adsense , amazon
2= now you can use your Your html Codes Sperated By Commas ,
example :
<a href="website1"><img src="banner1"> , adsense code , <a href="website2"><img src="banner2">

3 = Ads in archive
4 = Permission / section :
you can disable or enable the ads for a usergroups in each section : header , postbit , navbar , footer , forumdisplay

[megawelle]

hey man,

great mod! i also would love to see a Google Adsense Revenue sharing option.

thanks for your work!

[D.Baker]

Hello Karim004,
Thanks for the update, its a big step forward. However, using a comma as a code separator will conflict with any type of flash banner a user would like to embed, as flash embed codes generally have commas in them.

For example, this is the code I have setup in Who Sees Ads (http://planetozh.com/blog/my-projects/wordpress-plugin-who-sees-ads-control-adsense-display/), I thought it might help to show you what an end user like me is trying to do:

<div id="leaderboardad">
<a href="http://mydomian.com/twoweeksin/" onClick="javascript: pageTracker._trackPageview ('/webads/leaderboard_twoweeksin');" target="_self"><img src="http://mydomian.com/blog/wp-content/ads/twoweeksin_ad1.jpg" alt="Two Weeks In... " name="leaderboard1" width="728" height="90" /></a>
</div>
*** CODE ***
<div id="leaderboardad"></div>
<script type="text/javascript">
var so = new SWFObject("http://mydomian.com/blog/wp-content/ads/forum/DESTROYER2noLoopb.swf", "ForumDestroyer", "728", "90", "9", "");
so.addParam("wmode", "transparent");
so.write("leaderboardad");
</script>
*** CODE ***
<div id="leaderboardad"></div>
<script type="text/javascript">
var so = new SWFObject("http://mydomian.com/blog/wp-content/ads/burton/ESTbanner.swf", "BurtonEST", "728", "90", "9", "");
so.addParam("wmode", "transparent");
so.write("leaderboardad");
</script>

As you can see, the first banner in the set is a plain JPEG with some Google Analytics tracking code, the second and third banners are Flash banners embedded using the swfobject.js embed method (http://code.google.com/p/swfobject/wiki/documentation). As you can see from my code, using a comma will not separate the banners correctly. May I suggest you use a unique code separator instead of a comma (ideally this could be changed by the user) such as ***CODE*** or ***ROTATE***, that way a user could use your plugin to embed anything, even non ads!

And, doing it this way would mean the user could specify his own DIVs and CSS, thus removing the need to edit templates to center ads, or anything like that. As the users is placing their own DIVS, it would also allow ads to be embedded that are different sizes, so you wouldn't need the global size setting anymore. How awesome would that be!?

Thanks again and keep up the good work.

[karim004]

Hello Karim004,
Thanks for the update, its a big step forward. However, using a comma as a code separator will conflict with any type of flash banner a user would like to embed, as flash embed codes generally have commas in them.

For example, this is the code I have setup in Who Sees Ads (http://planetozh.com/blog/my-projects/wordpress-plugin-who-sees-ads-control-adsense-display/), I thought it might help to show you what an end user like me is trying to do:

<div id="leaderboardad">
<a href="http://mydomian.com/twoweeksin/" onClick="javascript: pageTracker._trackPageview ('/webads/leaderboard_twoweeksin');" target="_self"><img src="http://mydomian.com/blog/wp-content/ads/twoweeksin_ad1.jpg" alt="Two Weeks In... " name="leaderboard1" width="728" height="90" /></a>
</div>
*** CODE ***
<div id="leaderboardad"></div>
<script type="text/javascript">
var so = new SWFObject("http://mydomian.com/blog/wp-content/ads/forum/DESTROYER2noLoopb.swf", "ForumDestroyer", "728", "90", "9", "");
so.addParam("wmode", "transparent");
so.write("leaderboardad");
</script>
*** CODE ***
<div id="leaderboardad"></div>
<script type="text/javascript">
var so = new SWFObject("http://mydomian.com/blog/wp-content/ads/burton/ESTbanner.swf", "BurtonEST", "728", "90", "9", "");
so.addParam("wmode", "transparent");
so.write("leaderboardad");
</script>

As you can see, the first banner in the set is a plain JPEG with some Google Analytics tracking code, the second and third banners are Flash banners embedded using the swfobject.js embed method (http://code.google.com/p/swfobject/wiki/documentation). As you can see from my code, using a comma will not separate the banners correctly. May I suggest you use a unique code separator instead of a comma (ideally this could be changed by the user) such as ***CODE*** or ***ROTATE***, that way a user could use your plugin to embed anything, even non ads!

And, doing it this way would mean the user could specify his own DIVs and CSS, thus removing the need to edit templates to center ads, or anything like that. As the users is placing their own DIVS, it would also allow ads to be embedded that are different sizes, so you wouldn't need the global size setting anymore. How awesome would that be!?

Thanks again and keep up the good work.
thank you D.Baker
let me see check if i can let users select a separator from the admincp

[redlabour]

Ehmmm...

before anyone Upgrades some Warnings to the Developer:

1. Where is the Feature Full-Page-Ad' after X Posts' gone?

2. And you write : "05/18/2008 Version 2.1" in the FirstPost - but it is only 2.0 ?

3. Archive-Ads still completely missing in AdminCP and in Forum.

4. You did mistakes in the AdminCP Descriptions:

Enable footer advertisements your forum?

footer end advertisement code

Enable footer start advertisements your forum?

footer end advertisement code

5. BTW - you forget Ads after X-Post in Postbit in your Description of Product here in the first Post but it still works.

6. My Random Code is deleted after Upgrading??

7. You entered absolutely useless Usergroups as Default in AdminCP Options.

:eek:

[karim004]

Ehmmm...

before i install/update:

1. Where is the Feature Full-Page-Ad' after X Posts' gone?

2. And you write : "05/18/2008 Version 2.1" in the FirstPost - but it is only 2.0 ?

3. Archive-Ads still completely missing in AdminCP and in Forum.

4. You did mistakes in the AdminCP Descriptions:



5. BTW - you forget Ads after X-Post in Postbit in your Description of Product here in the first Post but it still works.

???????????
:eek:
redlabour i told you yesterday i am still testing the x post in full page !
for the version it s just a mistake typo ((thx )) !
for archive (( works with header & footer )) next version i am gotta add a option to turn it on or off !

and dont forgot it s just a free script i cant get millions features in 4 days come on !

[redlabour]

for the version it s just a mistake typo ((thx )) !

There are a lot of Typo-Errors in the first Post.

installation :

you know in vb3.7 we already have a templates group for advertisement we gotta use them in this mod and make things easy for you because you dont have to edit any template just import the product go to admincp , vBulletin Options , Advertisement System and click yes to Enable advertisements on your forum?

and so on ......


for archive (( works with header & footer )) next version i am gotta add a option to turn it on or off !

Ehmmm... nobody wants the same Ads in Archive as in the Forum.

GoogleAdSense and Amazon have different Codes for only Text. We need a complete own Ads in Archivefunction.


Ok - and what about the Points :

5 + 6 + 7

And sorry for my Post above - but you have told us yesterday that the lost Features will be in this next Update - sorry but this is irritating.

So in my Eyes it is 1.3 and not 2.0. ;)

BTW - you can hit the Button for "Beta-Testing" in your First Post.

[redlabour]

Another Couples of Bugs:

Footer Start Ads are not centered. Footer End Ads are!
And before you forget it - in AdminCp you named both "Footer End".

Ads in Postbit are broken - not longer centered and at the End after Banner there is a readable Code :

var ry=Math.floor(Math.random()*myimages.length) if (ry==0) ry=1 document.write('') // specifies link in new window } random_imglink() //-->


Clickend uninstall now and cleared MOTM Nomination. Sorry - but this Hack is Crap at this Time and not Version 2.0 - maybe Version 1.0 RC2. And i am very sorry to say that i think you are not knowing what you are doing.

I go back to vBAdManagement 4 (https://vborg.vbsupport.ru/showthread.php?t=131150) since there is a working Ad-Product for 3.7 from anyone because the Core Functions are well working with 3.7!

[karim004]

There are a lot of Typo-Errors in the first Post.





and so on ......



Ehmmm... nobody wants the same Ads in Archive as in the Forum.

GoogleAdSense and Amazon have different Codes for only Text. We need a complete own Ads in Archivefunction.


Ok - and what about the Points :

5 + 6 + 7

And sorry for my Post above - but you have told us yesterday that the lost Features will be in this next Update - sorry but this is irritating.

So in my Eyes it is 1.3 and not 2.0. ;)

BTW - you can hit the Button for "Beta-Testing" in your First Post.
for ads in archive i said i gotta add the option in next update

for group 5 , 6, 7 come on man it s just a default usergroup to show the newbies how the option work you can enter your usergroup id you want enable or disable the ads for them so what s wrong with that ?

for the version i updated the mod in my forum test till i get v2 and relase it if you have prb with this i can change it for you !

a question :
did you find any prb (( not typo )) i am saying prb in this mod ?

anyway i am fixing the typo errors (thanks )) and it s not a big deal if you center the code in your footer

[Chance4Today]

I put the code in as described by you and still nothing shows up am I missing something? I really would like to get a rotating banner on my sites

thanks

[exetel]

karim004,

I've notice with the slideshow that there is a white box, i know this might be a dumb question however is there away to make the white box the same colour of the rest of the forum background?

Awesome script by the way :)

Regards

Cheyne

[D.Baker]

Hey Karim004,
Your doing good work, don't stress. If people want special requests, then I'm sure somebody over here could help (http://www.scriptlance.com/), otherwise take your time and thanks again for the help. Don't forget, this is the best ad manager for 3.7 at the moment, so you're holding all the cards. Not to mention, that by the very nature of this plugin it helps people earn money, so it annoys me to see people getting on your case about it when your doing this for free.

Anyway, back to the plugin. Like I said above, if you just removed all alignment code, and let the users do this through DIVs and CSS, then it saves you the work of coding this. I removed the center code from your "header end" templates, but I think in the future you should just leave it up to the end user.

For an example (just so you know how I am using this & it might helps n00bs) I added this CSS to my style:

#headerad {
height: 90px;
width: 728px;
margin: 25px 30px 0 0;
}

And my ad code is like this (as I can't ad the flash ones in yet due to commas):

<div id="headerad">
<a href="http://mydomain.com/twoweeksin/" onClick="javascript: pageTracker._trackPageview ('/webads/leaderboard_twoweeksin');" target="_self"><img src="http://mydomain.com/blog/wp-content/ads/twoweeksin_ad1.jpg" alt="Two Weeks In... " name="leaderboard1" width="728" height="90" /></a>
</div>

Another idea for the future, to be able to have different ads display depending on which Forum/Child forum you're in. This would let users have more targeted ads, which is just good strategy.

Keep it up,
D.Baker

[LukaB]

Chaps,

I appear to have it all working except, and I'm a little confused about this, but shouldn't I be able to have say, one ad (486x60) in the postbit part and have it rotate into other ads. Basically I'm trying to figure out how one would rotate several ads. No matter what I've tried the ads don't appear to rotae. Could anyone post a bit of code here showing how to rotate for the postbit part of it.

Much obliged

[exetel]

Ahh found it don't worry it was under

ad_header_logo

changed code from var bgcolor='white' to var bgcolor='YOURCOLOUR'

If anyone else wants to change BG colour :)

Awesome script i must say hehe

Regards

Cheyne

[LukaB]

Great I agree, but have you ant idea how to answer my last post regarding rotating ads in the postbit part. I'd be most greatful

[PlayfulGod]

Ok I must be stupid or missing something. I can get random ads too show when ypu manual refresh etc. I cant seem to get rotation to work. I have this as the code.

slideshowcontent[0]=["http://xxxxxx.com/images/xxxxxx-Logo-(mirrored)-Black.gif", "http://xxxx.com", "target=_blank"]
slideshowcontent[1]=["http://xxxxxxxxx.com/images/kb.gif", "http://xxx.com", "target=_blank"]


Is that the correct format?

[Vinyljunky]

Karim,

Thank you for taking up the challenge of creating an Advert MOD :up: There are a few moaners but we really appreciate your time :)

Does this mod give us the ability not to display ads on certain pages? Such as login and search, I think this is an important one because of the Adsense rules.

Regards

VinylJunky

[jeefo]

thanks ,,
look great ,, i'll try now :)

[thestaton]

works great! INSTALLED!

[TheInsaneManiac]

05/18/2008 Version 2.1
*******************
1= rotation work now for both banner (image+link ) and other scripts like google adsense , amazon
2= now you can use your Your html Codes Sperated By Commas ,
example :
<a href="website1"><img src="banner1"> , adsense code , <a href="website2"><img src="banner2">

3 = Ads in archive
4 = Permission / section :
you can disable or enable the ads for a usergroups in each section : header , postbit , navbar , footer , forumdisplay

Installled and Nominated for MOTM!

[iogames]

<i>Go-go-go!!!</i>

[T.S.]

I think 1.1 removed some of my ad location templates when I uninstalled it. They were all there when I installed it, but I only have 3 or 4 after removing it. :erm:

Edit: It seem the current version does it too.

[TheInsaneManiac]

Bug:
In certain skins like dark_vb, the slideshow will cause scroll bars to be placed on smaller resolution monitors causing the ad to be cut off.

[msorin]

Is there a way to create different ads for different usergroups? If not, is there a mod to do this like the new notice system.

[Chris583]

I'm trying to get ads to display right below the nav, I put the image and link html which does work, in the navbar fields, and enable both root and other forums and all usergroups.

But it doesn't show up?
Can anyone help me to get the ad to show right below the navbar?

[TRONIXNEWS]

Is there a service to have this installed properly? If yes, were can I sign up? I've tried my best to get the original version to work on my new forum www.tronixnews.com/forum but to no avail. Neither the original, nor this update works for me. What can I do to have it installed correctly by somone?

[TheInsaneManiac]

Is there a service to have this installed properly? If yes, were can I sign up? I've tried my best to get the original version to work on my new forum www.tronixnews.com/forum but to no avail. Neither the original, nor this update works for me. What can I do to have it installed correctly by somone?
It would help if we knew the problem.

[TRONIXNEWS]

It would help if we knew the problem.

The problem is the mod doesn't show up. I've installed all the files, and change the permissions for the usergroups so they can view the ad, but still nothing shows. So either I am doing something wrong (which probably is the case) or there is some type of conflict which I wouldn't know how to recognize.

[archaosus]

Excellent work - I have had no problems at all with this code. Works great!

[T.S.]

The problem is the mod doesn't show up. I've installed all the files, and change the permissions for the usergroups so they can view the ad, but still nothing shows. So either I am doing something wrong (which probably is the case) or there is some type of conflict which I wouldn't know how to recognize.

PEBKAC :cool:

[Chris583]

In postbit google ad code works fine. I cannot get it to work display ad banner though in any other place besides that and header.

[TheInsaneManiac]

Bug:
In certain skins like dark_vb, the slideshow will cause scroll bars to be placed on smaller resolution monitors causing the ad to be cut off.

[jnrdavo]

can you include swf files as ads? If so, can somebody please give me the code?

Any help GREATLY appreciated!

[bada_bing]

How about a link next to the ad that says to remove these ads click here or phrased so we can change the wording?

[Arbit3r]

what is the $ad_location for the postbit? I cant find it anywere!

[TheInsaneManiac]

What's the $ad_location for the slideshow?

can you include swf files as ads? If so, can somebody please give me the code?

Any help GREATLY appreciated!
<object width="550" height="400">
<param name="movie" value="somefilename.swf">
<embed src="somefilename.swf" width="550" height="400">
</embed>
</object>

Change the somefilename.swf to your files location and name. Also make sure you change the width and height.

[FRANKTHETANK 2]

my adds don't show up what am i doing wrong

[jnrdavo]

What's the $ad_location for the slideshow?


<object width="550" height="400">
<param name="movie" value="somefilename.swf">
<embed src="somefilename.swf" width="550" height="400">
</embed>
</object>

Change the somefilename.swf to your files location and name. Also make sure you change the width and height.

thanks mate, I'll give it a shot... I ended up finding this last night and it's working... same type of thing, just a bit more text...


<object classid = "clsid: D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="160" height="900">
<param name="movie" value="http://www.ozaudi.com/forums/images/Ads/Mike Weber Tall.swf">
<param name="quality" value="high">
<embed src="http://www.ozaudi.com/forums/images/Ads/Mike Weber Tall.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="160" height="900"></embed></object>

[ESADCG]

ive given up on this one now ive been tying for days to get this working ive followed all of the info in this thread and no matter what i do the ads still do not show up.

i have tried to do this with both the default vbulletin style thats standard in vbulletin and also with my customised themes but it will not do anything full stop

im using vbulletin 3.7.0

First let me thank the author for doing this mod. It's sad that RedTyger has dropped off the face of the Earth, and doesn't support the old mod any more. What a fantastic piece of work it is. Now. . . with that said. . .

For those of you having trouble with this, I am still running the old version on all of my forums, and it works perfectly with vb3.7. I never tried the auto refresh and couldn't care less if it works or not. Everything else works fine.

So don't worry about installing the old mod on your 3.7 forums.

[D.Baker]

Hey kami004,
How'd you go changing the random code separator from a comma to something else? It would be so good to be able to change that, then we could have rotating flash banners!

Thanks,
Drew

[D.Baker]

ESADCG, wouldn't that flash embed code give you an active-x warning in older versions of IE? I thought you had to do SWFobject (http://code.google.com/p/swfobject/) embeds to avoid those. It would be great if I didn't have use SWFobject, but I don't want those active-x warnings.

[Arbit3r]

Anyone know the $ad_location for the postbit? It seems there all noted apart from that one.

[karim004]

Hey kami004,
How'd you go changing the random code separator from a comma to something else? It would be so good to be able to change that, then we could have rotating flash banners!

Thanks,
Drew
yes baker i changed the separator in version 2.1
if you have prb try edit the templates :
slideshow :template header
after :
<td align="$stylevar[right]" id="header_right_cell">
make sure you have :
<if condition="$ad_location['ad_header_logo']">$ad_location[ad_header_logo]<else />&nbsp;</if>

header : template header
after :
$_phpinclude_output
make sure you have :
$ad_location[ad_header_end]
below navbar : template navbar
after :
<!-- / PAGENAV POPUP -->
</if>
make sure you have :
$ad_location[ad_navbar_below]

footer : template footer
before :

<br />
<div class="smallfont" align="center">$vbphrase[all_times_are_gmt_x_time_now_is_y]</div>
<br />
make sure you have :
$ad_location[ad_footer_start]

before :
<if condition="$show['dst_correction']">
make sure you have :

$ad_location[ad_footer_end]

forumdisplay :
before :
<!-- Active Users in this Forum (and sub-forums) and Moderators -->
make sure you have :

$ad_location[ad_forumdisplay_afterthreads]

postbit : before
<!-- post $post[postid] popup menu -->
make sure you have :
$template_hook[postbit_end]

[D.Baker]

Hey kami004,
Awesome! Where can I download version 2.1? This page only links to version 2.0.

Thanks.

[Battle_Ring]

dont seem to work for me
It just displays a portion of the code i nthe header area

http://refundersworld.com/index.php

[Battle_Ring]

got it working was something to do with what i had names the ad

[gorentals]

Ok, please help. I have uninstalled this mod, as I couldn't figure out how to get ads displayed. Anyways, now after uninstalling, most of my ad location templates are missing. How do I get these back?

Thanks

[final4ever08]

This plugin doesnt work on 3.7.1

[gorentals]

Ok, please help. I have uninstalled this mod, as I couldn't figure out how to get ads displayed. Anyways, now after uninstalling, most of my ad location templates are missing. How do I get these back?

Thanks

I have Vbulletin 3.7 installed, and I uninstalled, and now I am missing most of my AD Location Templates. Especiallly Ad_header_logo

If I re-run upgrade.php, will this fix this, without loosing any of my other MODS I put on my forum? I think the uninstall needs to be looked at, as it deleted stuff it shouldn't have.

Thanks

[shinydarkstone]

hey kami004, i cheked all the templates and i have evrything in order, but it dont display the ad on the postbit

[Arbit3r]

Yeah its a nightmare to get working, i noticed that to get postbit working you need to click the enable header and footer ads... It seems like a good mod but its soo glitchy.

Im almost tempted to install a seperate adserver to get it working.

[karim004]

monday i am gotta relase v2.1 :
* fix for postbit
* flash rotation
* comp with 3.7.1
* ads in more locations (( left&right side , forumbit ........ ))

[rm-rf]

Two questions
Does this work with Xopen Java code ? (I saw mention of xopen in the thread here but didn't see if it works or not.)

Will this mod allow for specifying what ads to show and not show when viewing individual forums.

[Bonus Paradise]

monday i am gotta relase v2.1 :
* fix for postbit
* flash rotation
* comp with 3.7.1
* ads in more locations (( left&right side , forumbit ........ ))

Good to know
I upgraded last night to 3.7.1
and today i tried and tried this advertisment and no banners showing
aboslute nothing happens.

lol, so are you saying it cant work now in any way on 3.7.1
or did i do anything wrong maybe?

thanks

[DoB Rhapsody]

I'm placing adsense on my site but i have two styles. I would like to style my adsense to look like the style that the user is currently viewing. Is there an if condition i can use for this?

I've tried the code below which i was sure was going to work but it didn't..
<if condition="$bbuserinfo['styleid'] == X">
SOME CODE
</if>

[wilbkr1]

Hello,

Very interested in this Mod and wanted to confirm that it will work with 3.7.0 and 3.7.1 . Thank you for your hard work.

Wilbkr1

[Vinyljunky]

I have a feature request, and because of the Adsense Terms and Conditions I think its quite an important missing feature.

Can we have the ability not to display ads on certain pages? Such as login and search

Thanks

VJ

[thompson]

cool, but missing ads for left and right colum.

sorry, but i didn t see the release announcement for 2.1

is there a german language file ?

[OsideRida06]

There is suppose to be a new release today. I have been waiting a week for it myself. But I have been keeping silent. I know the designer here has been working hard on it. So just give him some time.

[Arkidas]

Is it allowed by Google to ( ajax ) rotate their ads?

[karim004]

Can we have the ability not to display ads on certain pages? Such as login and search



VJ
well it s 5h30 pm EST now if i didnt get it done by 10h00 pm i will include it in version 2.2 with the ad sharing
Is it allowed by Google to ( ajax ) rotate their ads?
yes arkidas it s allowed by google . but they dont allowed the auto refresh .
There is suppose to be a new release today. I have been waiting a week for it myself. But I have been keeping silent. I know the designer here has been working hard on it. So just give him some time.
yes the new relase gotta be available tonight (( us time ))

[OsideRida06]

Sweet.

I cannot wait to get it. I didnt even bother downloading the last one. The new update is going to well worth the wait for sure.

[ronronmx]

Sorry to bug you Karim, just wanted to know if you're almost done with the new version and when are you planing on releasing it? Thx for all your work and time, great mod!

[King Justice]

Where's da new version!? :D:D:D:D

[King Justice]

Doesn't work with vB 3.7.1...very buggy...
Update please..?

[King Justice]

Uninstalled & very disappointed.

[purepothead]

Uninstalled & very disappointed.

Why?, a few reads shows he hasnt updated it just yet to work with 3.7.1. Or did you mean your disapointed with yourself for not takin the time to read?

[karel1985]

karin004,

i am now still using the vbadmanagment on my board but i am very interested in your mod and i have tested shortly and i prob will install it when i have comparable functions:


1.
now in the footer i have the sponsor advertisments:
example: www.pc-helpforum.be
footer tekstlinks 4 rows

This is not possible in a simple way?

2.
In the postbid i display adds after the First and before the last post. In this mod i can set 'after first post' but not 'before last post'? Or is it added already?

example: http://www.pc-helpforum.be/f16/steun-pc-helpforum-en-doneer-4482/

i have 2 advertisers, so 1 appears in the first and the other in the last. (it changes random)
now with admanagment sometimes i see 2 times the same banner... I want to avoid this so each advertiser gets the same views...

someting to manage?

Thanks !

[OsideRida06]

Why?, a few reads shows he hasnt updated it just yet to work with 3.7.1. Or did you mean your disapointed with yourself for not takin the time to read?

Yeah no doubt. I will happily wait for this mod.

[The Gift]

where is the new version?

[csquare016]

does this work with the latest version of 3.6? I installed but nothing is showing up. Any code I can use to get it to work?

[OsideRida06]

Yes I believe it has been installed successfully on 3.6. You just have to make sure you follow all the directions carefully, upload all the files correctly (make sure they all uploaded), and make sure you have all the settings set correctly. If you have done these things, then it should be working great.

[karim004]

where is the new version?
sorry i lost a member of my family monday !
i added all your requests in version 2.1
the features now :
* works for v3.7.x and also v3.6.x
*ads in header , footer , below whats going on you can rotate Affiliates advertisement x small banners , below the navbar done
* request by our friend D.Baker : the flash rotation working now in all area done
* request by our friend Vinyljunky : you have the ability do not display ads on certain pages Such as login and search because it s against the tos (( thank you Vinyljunky for your Important Request done
* ads in left & right side done
* ads in left side in memberinfo done
* google analytic done
* ads in thread*forumbit with the ability of x forumid & after x thread done
* general request : rotation for postbit - postbit legacy with more conditions such after x posts , in x page ................. done
* ads in pms done
* ads announcement done
* left & right side in full page done
* permissions

you can check the new version here Advertisement System V2.1 (http://www.momsasone.com/forum/)

plz give me 2 hours to include 2 more requests in this relase because i want focus in my new script portal system (( with unlimited pages ))

[def3ctx]

Can anyone tell me how to add mulitads on header, i want to put 10adv's, in refresh i want automaticlly to be changed, can anyone help me with codes thanks.

[ronronmx]

sorry i lost a member of my family monday !
i added all your requests in version 2.1
the features now :
* works for v3.7.x and also v3.6.x
*ads in header , footer , below whats going on you can rotate Affiliates advertisement x small banners , below the navbar done
* request by our friend D.Baker : the flash rotation working now in all area done
* request by our friend Vinyljunky : you have the ability do not display ads on certain pages Such as login and search because it s against the tos (( thank you Vinyljunky for your Important Request done
* ads in left & right side done
* ads in left side in memberinfo done
* google analytic done
* ads in thread*forumbit with the ability of x forumid & after x thread done
* general request : rotation for postbit - postbit legacy with more conditions such after x posts , in x page ................. done
* ads in pms done
* ads announcement done
* left & right side in full page done
* permissions

you can check the new version here Advertisement System V2.1 (http://www.momsasone.com/forum/)

plz give me 2 hours to include 2 more requests in this relase because i want focus in my new script portal system (( with unlimited pages ))

I am very sorry to hear about your loss :(
Best wishes to you and your family...

[karim004]

06/07/2008 v2.1
read the first post

[OsideRida06]

I will be installing it here in just a few hours. Thanks.

[PlayfulGod]

I can not seem to get the auto rotation to work. Cant get the slide show to work at all. I posted up b4 about it but seems it got over looked. Any help?

[karim004]

I am very sorry to hear about your loss :(
Best wishes to you and your family...
thank you ronronmx
Can anyone tell me how to add mulitads on header, i want to put 10adv's, in refresh i want automaticlly to be changed, can anyone help me with codes thanks.
You're not allowed to auto refresh the ads . Read the ToS
I can not seem to get the auto rotation to work. Cant get the slide show to work at all. I posted up b4 about it but seems it got over looked. Any help?
i can install it for you !

[jipjip]

where do you set usergroup permissions?

[OsideRida06]

I am going to smoke a cig real quick and then install this great mod. I am pretty sure though that in 2.1 you saved the .txt files as .x. So they will not open. I knew to rename the file, but I am not sure if everyone else will (most will though).

I will be back with an update in about an hour or so. cig break, test board, then install.

[OsideRida06]

where do you set usergroup permissions?

The usergroup permissions are set differently for each place you want ads to display.

For example

For footer & header ads go to, AdminCP>vBulletin Options>Advertisement System (header &footer). Then all the way at the bottom it will say.

Display Header , Footer & Affliates advertisements to Usergroups: Place usergroups here you want to see the header and footer ads.

Do NOT display Header , Footer & Affliates advertisements to Usergroups: Place usergroups here you do not want to see the ads.

Although I am not sure why you should need to fill in both. My guess is he gives you both options in case there is only one usergroup you do not want to display ads to. That way you can just fill that in real quick, rather than fill in ALL the ones you do want to see the ads. It will be the same for the other places to have ads. You have to set it for each place you display them.

Well I hope this helps you. Please let me or the owner of the mod know if you need any more assistance.

[OsideRida06]

I am having alittle trouble understanding how all of this works. I have everything installed correctly. That is for sure. I have all the template edits done and in the correct spots.

If I am just trying to install a google ad at the moment, right below the navbar, how do I go about this? I wasn't sure how to do it so I tried the following things.

I tried adding the code to the "Google Analytics code" section. That did not work. It showed the ad in the footer. This is with the footer options all turned off. I had the header options turned on and it still displays in the footer. But this was just testing. I was not even sure if I was suppose to put it in the google analytics cide section or not. So I then turned this off and removed the code from there.

I know it uses the vb ad management templates. So I added the google code back to the vb template right below the navbar. It nows shows up like it is suppose to. So I go and turn off the header part of the advertisement system. To see if it some how controls the vb templates. The banner still shows with the header part turned off in the advertisement system.

I also tried a few other variations, but I cannot seem to get it to work. Is there some one that can explain this to me? I follow directions great. But there are no directions on how to do this. Like I said, I know I have it installed correctly. I know how to follow directions. I now just need help to get a simple google ad displayed. After that I will be able to figure out the rest.

Lastly, I cannot figure out how to get the sponsored link to disappear? It really does not look good down there with no links. I am going to have to uninstall this soon if I cannot figure it out. I have alot of users and do not want them seeing that. It looks very unprofessional, as I am sure all of you know.

I would greatly appreciate the help. And thanks for your time in advance.

[TrIn@dOr]

Without having an ad configured yet i'm seeing a sponsored link table at the footer (bottom) of all my pages.

http://www.clandelsur.com/

help?

[swellinfo]

outstanding!!

[karim004]

I am having alittle trouble understanding how all of this works. I have everything installed correctly. That is for sure. I have all the template edits done and in the correct spots.

If I am just trying to install a google ad at the moment, right below the navbar, how do I go about this? I wasn't sure how to do it so I tried the following things.

I tried adding the code to the "Google Analytics code" section. That did not work. It showed the ad in the footer. This is with the footer options all turned off. I had the header options turned on and it still displays in the footer. But this was just testing. I was not even sure if I was suppose to put it in the google analytics cide section or not. So I then turned this off and removed the code from there.

I know it uses the vb ad management templates. So I added the google code back to the vb template right below the navbar. It nows shows up like it is suppose to. So I go and turn *off the header part of the advertisement system. To see if it some how controls the vb templates. The banner still shows with the header part turned off in the advertisement system.

I also tried a few other variations, but I cannot seem to get it to work. Is there some one that can explain this to me? I follow directions great. But there are no directions on how to do this. Like I said, I know I have it installed correctly. I know how to follow directions. I now just need help to get a simple google ad displayed. After that I will be able to figure out the rest.

Lastly, I cannot figure out how to get the sponsored link to disappear? It really does not look good down there with no links. I am going to have to uninstall this soon if I cannot figure it out. I have alot of users and do not want them seeing that. It looks very unprofessional, as I am sure all of you know.

I would greatly appreciate the help. And thanks for your time in advance.

to display ad below navbar :
go to admincp , vbulletin options , Advertisement System (left & right columns )
* yes to Enable navbar advertisements in your forum.?
* and check the permission below navbar random advertisement code it will display or not the the ad for usergroupx below navbar , left & right column
leave it blank to display it for all usergroup

header , footer :
go to admincp , vbulletin options , Advertisement System (header & footer) :

enable the script for each section , add your codes and check the permission :
it will display or not the ad for usergroupx in header , footer and below what s going on ?
leave it blank to display ad for all

Postbit , postbit_legacy , announcement , pms
go to admincp , vbulletin options ,Advertisement System (posts, PMs & announcements)
yes to enable the script for each section , add your code and check the permission for usergroupx (( leave it blank to display ad for all ))

Settings : Google Analytics ...
go to admincp , vbulletin options , Advertisement System (settings & Slideshow)
yes to enable the advert system in your forum ,
Do NOT display advertisements for scripts: login|register|search
google analytics i dont know whatyou talking about it s just a traking code ! and you can see the stats in google analytics website !

[Smurky]

Well, I installed this product, and modified the templates, but I am having an issue with the footer ad. It's not showing in the Sponsored Links box, but at the very end of the page.

Seems very buggy to me, I'll wait on using it.

[karim004]

Well, I installed this product, and modified the templates, but I am having an issue with the footer ad. It's not showing in the Sponsored Links box, but at the very end of the page.

Seems very buggy to me, I'll wait on using it.
you mean below whats going box !
Enable Affiliates advertisements in your forum? = yes

footer template :
vb3.7.X
check if you have : $ad_location[ad_footer_start] in top
vb3.6.X
check if you have : $ad_footer_start in top

[mathieulh]

Is it possible to rotate/slideshow adsense ads ? If so, how ?

Also using the dark_vb skin on 3.7.1 the ads on the left and right sides wont show up. (the header and footer display fine though)

[The Gift]

Getting this when uploading XML
XML Error: Empty document at Line 1

[karim004]

Getting this when uploading XML
XML Error: Empty document at Line 1
it s working now ? (( i can see you using version 2.1 ))
Is it possible to rotate/slideshow adsense ads ? If so, how ?

Also using the dark_vb skin on 3.7.1 the ads on the left and right sides wont show up. (the header and footer display fine though)
slideshow it s only for images if you want this for adsense you must use a auto refresh but it s against the tos (( google adsense will ban your acount ))

for left& right column i think you have some missing codes or some tags still open in your style !so try this :
in forumhome add <br /><div>$ad_leftcolumn_code</div> below $header

[TheInsaneManiac]

monday i am gotta relase v2.1 :
* fix for postbit
* flash rotation
* comp with 3.7.1
* ads in more locations (( left&right side , forumbit ........ ))
Does the flash rotation fix this:

In certain skins like dark_vb, the slideshow will cause scroll bars to be placed on smaller resolution monitors causing the ad to be cut off.

[OsideRida06]

How do I remove the Sponsored Links from the bottom of the forum?

[Vinyljunky]

sorry i lost a member of my family monday !

* request by our friend Vinyljunky : you have the ability do not display ads on certain pages Such as login and search because it s against the tos (( thank you Vinyljunky for your Important Request done


Im very sorry to hear of your sad loss.

Thank you for your time with this excellent mod.

Regards

VinylJunky

[karim004]

Does the flash rotation fix this:
yes you can use the flash rotation in version 2.1

In certain skins like dark_vb, the slideshow will cause scroll bars to be placed on smaller resolution monitors causing the ad to be cut off.
it s not the slideshow who cause this remember i said i am using in this script vbulletin templates {ad location }
it s your banner who cause this problem because it s too big width=623px !!!!
to fix this : resize dark_vb.gif to 500/142px

How do I remove the Sponsored Links from the bottom of the forum?
i dont undestand your question !
if you mean the ad title {Sponsored Links }
Admincp . Style Manager , Ad Location Templates ? , ad_footer_start
find & edit :
<td class="thead" align="left">Sponsored Links</td>

if you want remove the table :
Change :
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="thead" align="left">Sponsored Links</td>
</tr>
<tr>
<td class="alt1" align="center">

$footer_codeS
</td>
</tr>
</table>
With :
<div align="center">
$footer_codeS
</div><br />
Im very sorry to hear of your sad loss.

Thank you for your time with this excellent mod.

Regards

VinylJunky
Thank you Vinyljunky

[PlayfulGod]

i can install it for you !
I can handle installing it. I have the ads rotating randomly on refresh etc. But no auto or slideshow. I'll read the read n instructions in it (what there is) and followed the example for the code on the slideshow but it doesnt work.

[OsideRida06]

yes you can use the flash rotation in version 2.1

it s not the slideshow who cause this remember i said i am using in this script vbulletin templates {ad location }
it s your banner who cause this problem because it s too big width=623px !!!!
to fix this : resize dark_vb.gif to 500/142px

i dont undestand your question !
if you mean the ad title {Sponsored Links }
Admincp . Style Manager , Ad Location Templates ? , ad_footer_start
find & edit :
<td class="thead" align="left">Sponsored Links</td>

if you want remove the table :
Change :
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="thead" align="left">Sponsored Links</td>
</tr>
<tr>
<td class="alt1" align="center">

$footer_codeS
</td>
</tr>
</table>
With :
<div align="center">
$footer_codeS
</div><br />

Thank you Vinyljunky


Thanks bro. It worked like a charm!

[TheInsaneManiac]

2.1 Bugs:

Sponsored Links stays in the footer even when disabled and can not change Sponsored Links in the Admin CP.
Again when enabling footer advertisement the advertisement is below the footer bar.
Display advertisement every X posts does not work.


Reinstalling 2.0...

[karim004]

2.1 Bugs:

Sponsored Links stays in the footer even when disabled and can not change Sponsored Links in the Admin CP.
to fix this go to admincp , style manager , ad location templates , ad_footer_start
Change :
Sponsored Links
with
$adtitle

Again when enabling footer advertisement the advertisement is below the footer bar.
well move the code in your footer template ! i gave you the ability to display 2 Random advertisements in footer one below whats going on ? and the other below the copyrith . so open your footer and move :
$ad_location[ad_footer-end]
if you wanna it above the footer bar :
above :
$spacer_close
add:
$ad_location[ad_footer_end] [/QUOTE]
Display advertisement every X posts does not work.


Reinstalling 2.0...[/QUOTE]
if you want use this option (( after x posts )) you must disable
Display advertisement after first post on a page? & Display advertisement after last post on a page?

[def3ctx]

thank you ronronmx

You're not allowed to auto refresh the ads . Read the ToS

i can install it for you !



Yes, i need a auto ad changer when i refresh the page. maybe u know what i mean

[karim004]

Yes, i need a auto ad changer when i refresh the page. maybe u know what i mean
sorry i give priority to poeple who clicked install because i am so busy
Your question :
Can anyone tell me how to add mulitads on header, i want to put 10adv's, in refresh i want automaticlly to be changed, can anyone help me with codes thanks.
yes you can do this in version 2.1 using small banners and you can do this in all areas if you want : header , below navbar , left& right column , forum&threadbit , footer start & end .
example :

lets say we want roTate 2 sets of 5 websites :
set 1 :
website 1a= bannerlink1a & websitelink1a
website 2a= bannerlink2a & websitelink2a
website 3a = bannerlink3a & websitelink3a
website 4a = bannerlink4a & websitelink4a
website 5a = bannerlink5a & websitelink5a
set 2 :
website 1b= bannerlink1b & websitelink1b
website 2b= bannerlink2b & websitelink2b
website 3b = bannerlink3b & websitelink3b
website 4b = bannerlink4b & websitelink4b
website 5b = bannerlink5b & websitelink5b


<a href="websitelink1a"><img src="bannerlink1a"></a><a href="websitelink2a"><img src="bannerlink2a"></a><a href="websitelink3a"><img src="bannerlink3a"></a><a href="websitelink4a"><img src="bannerlink4a"></a><a href="websitelink5a"><img src="bannerlink5a"></a>
|
<a href="websitelink1b"><img src="bannerlink1b"></a><a href="websitelink2b"><img src="bannerlink2b"></a><a href=" websitelink3b"><img src="bannerlink3b"></a><a href="websitelink4b"><img src="bannerlink4b"></a><a href="websitelink5b"><img src="bannerlink5b"></a>

I think you want use this for Affiliates just remember if you want use the Affiliates in header put them inside a table :
go to admincp - style manager , ad location , ad_header_end :
change :
<center><div>
$header_ad
</div></center>
WITH
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="thead" align="left">$adtitle</td>
</tr>
<tr>
<td class="alt1" align="center">

$header_ad
</td>
</tr>
</table>

[verino]

Hello karim,

I have installed your mod, thank's.

The problem is with 1 of the custom style, currently I have 3 custom styles.

The 2 styles have no problem after I've done what you told here https://vborg.vbsupport.ru/showpost.php?p=1531103&postcount=90 and also in the manual.

The other style has the problem with the footer ads, the header ads works fine though.

In case you want to know the style that has problem, in here https://vborg.vbsupport.ru/showthread.php?t=177135

Any idea ? :confused:

[karim004]

Hello karim,

I have installed your mod, thank's.

The problem is with 1 of the custom style, currently I have 3 custom styles.

The 2 styles have no problem after I've done what you told here https://vborg.vbsupport.ru/showpost.php?p=1531103&postcount=90 and also in the manual.

The other style has the problem with the footer ads, the header ads works fine though.

In case you want to know the style that has problem, in here https://vborg.vbsupport.ru/showthread.php?t=177135

Any idea ? :confused:
hi verino
download the style and send it to me . i can upgrade it to v3.7.1 for you .

[ronronmx]

Hi Karim!
Thx for the great mod, i'm loving it! I'm having a small problem though, and i'm sure i'm doing something wrong :p

I can't get the Header and Footer ads to display, as well as the left/right columns ads. I followed the installation instructions that come with the zip file. I have all the other ads showing fine but those 2. I have the user groups set up right also, so I'm kinda stuck on this one...

Also, i have a stupid question...What's the "Full Page Advertisements"? When do they show up?

Thx a lot for your time,
Stephane

[verino]

hi verino
download the style and send it to me . i can upgrade it to v3.7.1 for you .

you mean the smoothred style ?

Where to send it to you ? by email ?

FYI : I'm using the vbulletin 3.7.0 beta 5 :D

Thank you for your response.

[goranbaxy]

installed, but right column doesnt work for me :(

[karim004]

you mean the smoothred style ?

Where to send it to you ? by email ?

FYI : I'm using the vbulletin 3.7.0 beta 5 :D

Thank you for your response.
pm , i can fix the footer for you there is some missing codes in your style .
Hi Karim!
Thx for the great mod, i'm loving it! I'm having a small problem though, and i'm sure i'm doing something wrong

I can't get the Header and Footer ads to display, as well as the left/right columns ads. I followed the installation instructions that come with the zip file. I have all the other ads showing fine but those 2. I have the user groups set up right also, so I'm kinda stuck on this one...

Also, i have a stupid question...What's the "Full Page Advertisements"? When do they show up?

Thx a lot for your time,
Stephane
hi stephone .
vb version ? if you are using vb3.7 check with your default style if you can see the ads then read again the installation instructions and edit the templates .
if you cant see the ads with your default style check the permissions (( leave it blank to display to everyone or enter the usergroupids for the groups you want display the ad for : example :
6|7|5|2

[karim004]

installed, but right column doesnt work for me :(
try this , in your footer
above :
$ad_location[ad_footer_start]
add :
$ad_rightcolumn_code

[verino]

pm , i can fix the footer for you there is some missing codes in your style .



pm sent, Sir :D

You can do it in your spare time, I know you have other important tasks to do besides coding :)

Really appreciate it. :up:

[goranbaxy]

$ad_location[ad_footer_start]

I don't have that :(

I'm using VB 3.7.1

[karim004]

pm sent, Sir :D

You can do it in your spare time, I know you have other important tasks to do besides coding :)

Really appreciate it. :up:
you first :D ok check pm
I don't have that

I'm using VB 3.7.1
well add both codes in top of your footer

[karim004]

you first :D ok check pm

well add both codes in top of your footer
sorry this will display the right column in all pages & the left in forumhome if you want display them both in all pages :
Template navbar :
below :
<!-- / PAGENAV POPUP -->
</if>

$ad_location[ad_navbar_below]
add:
$ad_leftcolumn_code
and in in top of your footer template add :
$ad_rightcolumn_code

if you want display left & right column just in forumhome then open your forumhome template and :
Below :
$navbar
Add:
$ad_leftcolumn_code
Above
$footer
Add :
$ad_rightcolumn_code

[dodgeuk19]

I have this working great thank you,

i would like to make a couple of suggestions tho,

how about adding a ADMIN CP link on the menu, is this easy to do, sorry not really a coder

and a vba module ( not sure if it was this post i read that this has been done or not sorry )

great work mate

thanks

dodge

[verino]

you first :D ok check pm



Bad news, Sir.

Have copied all the footer templates you sent via pm, and still didn't work.

This is really strange :confused:

PM re-send.

Rgds.

[PlayfulGod]

slideshow n auto rotate not work???

[mry]

really great... very thx

[karim004]

plz post your requests for version2.2 because i am almost done with my Social Networking it s a great mod who will give our members the ability to transforme the memberinfo to a real blog and they can add myspace layout , free chat , add media {videos , songs } bakground music , extra tabs so they can add more stuff , also they can set permissions allowing or not usergoupids to acces to there space

and i am gotta integrate this mod with Advertisement System V2.2 to give them the ability to display there ads in header , footer , left column
last day for v2.2 requests it s sunday
here is some print screens of the new mod :

[mathieulh]

I just updated to 3.7.1 PL1 and your mod no longer works :/

[karim004]

I just updated to 3.7.1 PL1 and your mod no longer works :/
import the product to print the ad_codes in your ad location templates ( select yes to Allow Overwrite )

[mathieulh]

Thanks, it works again now :)

[verino]

plz post your requests for version2.2 because i am almost done with my Social Networking it s a great mod who will give our members the ability to transforme the memberinfo to a real blog and they can add myspace layout , free chat , add media {videos , songs } bakground music , extra tabs so they can add more stuff , also they can set permissions allowing or not usergoupids to acces to there space

and i am gotta integrate this mod with Advertisement System V2.2 to give them the ability to display there ads in header , footer , left column
last day for v2.2 requests it s sunday
here is some print screens of the new mod :

Hello Sir,

Forgive me but how to put a request for version 2.2 :D

And while you have the time, would you mind check your pm :erm:

[ronronmx]

hi stephone .
vb version ? if you are using vb3.7 check with your default style if you can see the ads then read again the installation instructions and edit the templates .
if you cant see the ads with your default style check the permissions (( leave it blank to display to everyone or enter the usergroupids for the groups you want display the ad for : example :
6|7|5|2

Hi Karim,
sorry for the lack of info...I am running vb 3.7.1 and I am using a custom template. I didn't even think about trying it with the default template....but i will and i'll let you know if it works or not. Thx for your help :)

[goranbaxy]

well add both codes in top of your footer

Still doesn't work :(

[karim004]

Hello Sir,

Forgive me but how to put a request for version 2.2 :D

And while you have the time, would you mind check your pm :erm:
if you want new features in version 2.2 just post here so i can include them .
request for version 2.2 :
* Ad sharing
*Allow some members to publish there ad in album & memberinfo
example : Click Here (http://www.momsasone.com/ad/a2.JPG)
* Ad inside postbit,pms,announcement,postbit_legacy
example : Click Here (http://www.momsasone.com/ad/a1.JPG)
*Remove Advertisement

[Subah]

if you want new features in version 2.2 just post here so i can include them .
request for version 2.2 :
* Ad sharing
*Allow some members to publish there ad in album & memberinfo
example : Click Here (http://www.momsasone.com/ad/a2.JPG)
* Ad inside postbit,pms,announcement,postbit_legacy
example : Click Here (http://www.momsasone.com/ad/a1.JPG)
*Remove Advertisement

Cool :)

[verino]

if you want new features in version 2.2 just post here so i can include them .
request for version 2.2 :
* Ad sharing
*Allow some members to publish there ad in album & memberinfo
example : Click Here (http://www.momsasone.com/ad/a2.JPG)
* Ad inside postbit,pms,announcement,postbit_legacy
example : Click Here (http://www.momsasone.com/ad/a1.JPG)
*Remove Advertisement

Ok, I want it then :D

Btw, I just reinstall this, and now the slideshow is working.

I just browse to your demo site, and make the same path for the ads like you did in your site.

In the setting of Slideshow advertisement code, you have to make a folder in your forum root. The folder is "ad", this is for storing the animated gif file acts as the ads.

For example : slideshowcontent[0]=["http://your forum site/ad/animated file.gif", "http://link to the host site you want/", "_new"]

The strange thing is, it cannot do direct link from the other site for the slideshow ads, but you need to download the animated gif and put it in your "ad" folder in the forum root.

I did this without editing the template as instruction in the manual :D
It would be better if you can make it possible to just point the slideshow site path to the site you want to advertise.

Sorry for my bad english :D

*Installed.

[karim004]

Ok, I want it then :D

Btw, I just reinstall this, and now the slideshow is working.

I just browse to your demo site, and make the same path for the ads like you did in your site.

In the setting of Slideshow advertisement code, you have to make a folder in your forum root. The folder is "ad", this is for storing the animated gif file acts as the ads.

For example : slideshowcontent[0]=["http://your forum site/ad/animated file.gif", "http://link to the host site you want/", "_new"]

The strange thing is, it cannot do direct link from the other site for the slideshow ads, but you need to download the animated gif and put it in your "ad" folder in the forum root.



Sorry for my bad english :D

*Installed.
it s a slideshow so all banners must be in same server (( yours )) if you set the pause (5 secondes )) and a banner hosted in a slow server like imageshark , photobucket there is a risque that the next banner will not show up .
I did this without editing the template as instruction in the manual :D
It would be better if you can make it possible to just point the slideshow site path to the site you want to advertise.
in vb3.7.x you dont have to edit the templates: header , footer & navbar :)

[verino]

it s a slideshow so all banners must be in same server (( yours )) if you set the pause (5 secondes )) and a banner hosted in a slow server like imageshark , photobucket there is a risque that the next banner will not show up .
I did this without editing the template as instruction in the manual :D
It would be better if you can make it possible to just point the slideshow site path to the site you want to advertise.
in vb3.7.x you dont have to edit the templates: header , footer & navbar :)

ah, I see. But the strange thing is, the banner folder should be named with "ad" only. Is it possible to make it more flexible, so that I can make any folder name for storing the banners ?

Btw, I have to edit my custom styles templates, as the slideshow didn't show up :D

One more thing, how to make the slideshow in the header align to the right ?

I'm not a coder, so sorry for my question :erm:

[karim004]

ah, I see. But the strange thing is, the banner folder should be named with "ad" only. Is it possible to make it more flexible, so that I can make any folder name for storing the banners ?

Btw, I have to edit my custom styles templates, as the slideshow didn't show up :D

One more thing, how to make the slideshow in the header align to the right ?

I'm not a coder, so sorry for my question :erm:
verino you can rename the folder mine it s (( banner )) in my test forum just make sure when you rename the folder , edit the the images links in admincp/vBulletin Options/Advertisement System (settings & Slideshow)/Slideshow advertisement code
for your 2 nd it s already in right side ! if you mean move it to another area just open your header template find and move :
<if condition="$ad_location['ad_header_logo']">$ad_location[ad_header_logo]<else />&nbsp;</if>

Btw, I have to edit my custom styles templates, as the slideshow didn't show up :D
Because when you update from 3.6.x to 3.7.x you did not revert all templates for your custom styles to keep the design :D

[verino]

verino you can rename the folder mine it s (( banner )) in my test forum just make sure when you rename the folder , edit the the images links in admincp/vBulletin Options/Advertisement System (settings & Slideshow)/Slideshow advertisement code
for your 2 nd it s already in right side ! if you mean move it to another area just open your header template find and move :
<if condition="$ad_location['ad_header_logo']">$ad_location[ad_header_logo]<else />&nbsp;</if>


Because when you update from 3.6.x to 3.7.x you did not revert all templates for your custom styles to keep the design :D

ah, yes. You're correct. I have to revert the header template 1st for the default, then the ads will be in the right side.

Thank's a lot :D

[karim004]

in version 2.2 you can auto refresh the Random Advertisement In Header & Footer Start (( below whats going on )) i know some poeple using this area for the Affiliates so it s gotta be a great option for them
you can see a demo for the auto refresh in header {reloads every 10 secondes } : Click Here (http://www.momsasone.com/forum/index.php?styleid=12)

[Vinyljunky]

Feature Requests for 2.2

The ability to show adverts within other highly used mods such as:

Links and Downloads Manager (https://vborg.vbsupport.ru/showthread.php?t=166094) for example between quiz downloads - here is a good example (http://www.siliconhell.com/forum/downloads/links/1)

ibProArcade (https://vborg.vbsupport.ru/showthread.php?t=101554) display ads in blocks on Arcade homepage - see here (http://www.siliconhell.com/forum/arcade.html)

The above mods are very very popular but sadly it isnt easy to manage adverts on those pages. I think your mod would gain even more users if it could intergate with them.

Regards

VinylJunky

[Red Spider]

perfect, thanks

[user_not_found]

Very good job Thanks

[verino]

Hi Karim,

is it possible to ad a feature for the 2.1 version to be able to show the slideshow ads for certain usergroups ? like for the header & footer ads usergroups setting.

Thank's :D

[Quantnet]

bug:
Even the affiliate advertisement is disable, there still an empty box at the bottom, right on top of the footer.

[erinys]

i can show ads in my footer, but they wont show up in the other sections like PM, announcements, 1st post, last post etc.

im using default vb template with just some color changes to it and a custom header image, so nothing weird or fancy there.

is this because of 3.7.1 PL1?

[karim004]

i can show ads in my footer, but they wont show up in the other sections like PM, announcements, 1st post, last post etc.

im using default vb template with just some color changes to it and a custom header image, so nothing weird or fancy there.

is this because of 3.7.1 PL1?
works for vb3.6.x &vb3.7.x and a friend just tell me it s working for vb3.5
to fix this prb revert all templates & read the include instruction

[cosy]

nvm

[SAWASCI]

i installed but when i upgrade to 3,7,1 pl1 this mod did not work my site.only bottom,threadbit and postbit work.but did not work header.

sorry my bad english.

[karim004]

i installed but when i upgrade to 3,7,1 pl1 this mod did not work my site.only bottom,threadbit and postbit work.but did not work header.

sorry my bad english.
because i am using 5 vbulletin templates in this version : ad_header_end , ad_header_logo , ad_footer_end , ad_footer_start and ad_navbar_below
thats why you must import the porduct when you upgrade your forum !
i fixed this problem in version 2.2

[dreamygirl]

Thank you very much for this mod.

I would like to know the quick fix for this too:
bug:
Even the affiliate advertisement is disable, there still an empty box at the bottom, right on top of the footer.

[def3ctx]

Hi, i cannot understan this when i put the code as u typed, it display's many ads on website, i want in 2 ads left & right to change in refresh page.

[anarki2009]

Ok i'm a noob and i just need to know how to add banner thats it, Just one in the footer.....?
I can't find any code in the readme, can some one help me? I do have it installed

[karim004]

Thank you very much for this mod.

I would like to know the quick fix for this too:
i am fixing this bug now .
version 2.2 gotta be ready today with new features and fix :
bug (v2.1)
* adtitle in footer & postbit (( you can change this in admincp ))
* permission for slideshow (( ability to dispaly or not for usergroupid & do not display for this script ((login,search.......)

new features :
* simple rotation or auto refresh for (( header , footer , below whats going on & below navbar )
* post as a user in postbit& postbit_legacy

[karim004]

Ok i'm a noob and i just need to know how to add banner thats it, Just one in the footer.....?
I can't find any code in the readme, can some one help me? I do have it installed
go to admincp , vBulletin Options , Advertisement System (settings & Slideshow)
yes to Enable advertisements system in your forum?
after that go to Advertisement System (header & footer)
yes to enable Footer advertisement
add you adcode for each banner ((html code example <a href="website1"><img src="banner1"></a> you can use also adsense codes
if you want add more add | at the end of each code .
Hi, i cannot understan this when i put the code as u typed, it display's many ads on website, i want in 2 ads left & right to change in refresh page.
well enable advert just for left & right column

[anarki2009]

go to admincp , vBulletin Options , Advertisement System (settings & Slideshow)
yes to Enable advertisements system in your forum?
after that go to Advertisement System (header & footer)
yes to enable Footer advertisement
add you adcode for each banner ((html code example <a href="website1"><img src="banner1"></a> you can use also adsense codes
if you want add more add | at the end of each code .

well enable advert just for left & right column

Thanks for the fast reply, but i just can't get it to work. I'll have to wait for 2.2.:( Is it ok to uninstall this? I read some where that you could lose some stuff if you do so? :confused:

[anarki2009]

Maybe i can just pay you to install if you ever get time. Thanks for your hard work on this mod, it peeps like you is why noobs like me have nice sites. :)

[SAWASCI]

sometimes

i wanna show 2 banner top of the page (footer) but when i use | seperate,you know that i can only 1 advertise.but i wanna show 2 banners near by 468x60 + 468x60 or upside 728x90 + downside 728x90 or more than 2 banner.how can i do it Karim ??

and i attached a picture file for advertise place.if u make this.i will be happiest of the world :)

and special thanks for your working everyday for us...

sorry my bad english

[karim004]

Maybe i can just pay you to install if you ever get time. Thanks for your hard work on this mod, it peeps like you is why noobs like me have nice sites. :)
check your pm

sometimes

i wanna show 2 banner top of the page (footer) but when i use | seperate,you know that i can only 1 advertise.but i wanna show 2 banners near by 468x60 + 468x60 or upside 728x90 + downside 728x90 or more than 2 banner.how can i do it Karim ??
dont use the | betwen your 2 banners example :

<a href="link1"><img src="banner1"></a><a href="link2"><img src="banner2"></a>

and i attached a picture file for advertise place.if u make this.i will be happiest of the world :)

and special thanks for your working everyday for us...

sorry my bad english
okay .

[SAWASCI]

time is 22:30 in turkey.and i upgradeted to 371 PL2...
i can only see threadbit.

not working all other functions..header,footer,google analystic,affilates,left,right,bottom of the page...not working only threadbit can work with 371 pl2

[SAWASCI]

oh ok ok....

i install again the product-advertisementV2.1...and ok i can see the footer again..

[SAWASCI]

check your pm


dont use the | betwen your 2 banners example :

<a href="link1"><img src="banner1"></a><a href="link2"><img src="banner2"></a>

okay .



i tried this but some advertise can not seem.may be because of google..

[karim004]

i tried this but some advertise can not seem.may be because of google..

if you mean adsense !
<script type="text/javascript"><!--
google_ad_client = "pub-xxxxxx";

google_ad_slot = "xxxxxxx";
google_ad_width = 460;
google_ad_height = 68;
//-->
</script>
<script type="text/javascript"
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
</script><script type="text/javascript"><!--
google_ad_client = "pub-xxxxxx";

google_ad_slot = "xxxxxxx";
google_ad_width = 460;
google_ad_height = 68;
//-->
</script>
<script type="text/javascript"
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
</script>

[MorrisMcD]

Awesome addon.. A bit confusing at first considering the version changes etc.. Pretty much requires you read the ENTIRE thread to know the exact way to configure. But I have what I need out of it and very much excited about whats to come of this over time. I may get more use than I originally was seeking.

I do think you should be more detailed on the readme in the install as to avoid confusion as to how the code should be entered in each box.. But I am a bit on the noob side of the spectrum. Maybe examples? Would have helped me immensely.

Now for my question.. :) I use vbadvanced cmps and the header ads do show on the front page. Is there a way to actually keep this from happening?

Again.. Great addon.. Tyvm.. Install clicked

[karim004]

06/18/2008 Version 2.2
*******************
fix :
*** permission for slideshow
*** remove the table when you disable ad in footer (below whats going on )) for usergroupID !
*** Ability to change the adtitle via admincp in footer and postbit
new features :
** use simple or auto refresh rotation (you must disable one if you want use the other )
** post as user in postbit & postbit_legacy (ability to add a avatar )

If you upgrade plz backup first all your ad codes just open notepad and save your codes

[iogames]

Go-go-go! ;)

[karim004]

sorry i forgot attach the 3 php files for auto refresh
fix

[EhsanAhmad]

Great Work Bud , Just updated !

[karim004]

Awesome addon.. A bit confusing at first considering the version changes etc.. Pretty much requires you read the ENTIRE thread to know the exact way to configure. But I have what I need out of it and very much excited about whats to come of this over time. I may get more use than I originally was seeking.

I do think you should be more detailed on the readme in the install as to avoid confusion as to how the code should be entered in each box.. But I am a bit on the noob side of the spectrum. Maybe examples? Would have helped me immensely.

Now for my question.. :) I use vbadvanced cmps and the header ads do show on the front page. Is there a way to actually keep this from happening?

Again.. Great addon.. Tyvm.. Install clicked
check 1 reply
https://vborg.vbsupport.ru/showthread.php?p=1518268#post1518268

[MorrisMcD]

check 1 reply
https://vborg.vbsupport.ru/showthread.php?p=1518268#post1518268
Unfortunately I am having issues now... :) I upgraded to 2.2.. I did the template edits, which I checked and they weren't there. If I recall correctly 2.1 didn't have any?

Anyway, the templates are setup according to your readme. But now, when I enable the advertising system, it shifts my site banner logo to the left.. Which I currently have centered just through editing the header template..

Any ideas? Although minor, I think you improved on the admincp options.. ty

[SAWASCI]

i have to click the auto refresh box for showing advertising..or i can't see anything on header.and footer.and my advertising not centered as like 2.1...my ads showing left side on header. :(

i want 2,1 again but i deleted :(

[junaid]

I see Header Ads on centre how I put right side corner

[SAWASCI]

<right> ad code </right> try this.

[Quantnet]

thanks for the new version.
The empty box at the footer is now gone.

[junaid]

<right> ad code </right> try this.

where I have put this code??

[Silviu]

Hi karim004, great hack, works like a charm, but I have a question: do any of the vBulletin conditionals work with it? So I could show different ads on different sections of the forum? Something along the lines of:

<if condition="in_array($forumid, array(X,Y,Z))">
show_ad_code1
<else />
show_ad_code2
</if>

[erinys]

great work with the update! But yeah for some reason i aswell have lost the ability to show the header and footer ads. I did the edits as mentioned though so im not sure.

Have you got any idea where i can look to get it solved? wich templates etc?

thanks!

[scruffy]

Hey :)

I have started a forum, (VW) as a necessity! But I am uber untechnical, and the only person I had to assit me has gone awol :(

Whilst I understand tis must be blimmin annoying, I am trying to learn this stuff, honest to gawd I am - but struggling muchly. Hell I'm still learning how to e-mail. I was wondering, *as you do* f someone could spend a moment with me to explain in cildlike terms how to add an advertisement bit down the side of my forum? I have 2 companies that have sent me logos etc, but not an idea how to add them :( Even had offers of money from a different 2 but had to say no as I cant do it. Bit on my own here with the running of it, and could really use some assistance. Pretty please.

Em x

[fodboldforumdk]

Couldent find it anywere so i ask.

This Ad system. Can it run CPM, CPC, CPA, Time Frame and mixed?

[mry]

direct rewirte to on.. or new install for upgrade ?

[giorgioarmani]

how do i do the upgrade?

[erinys]

header and footer dont show anymore in the website, they do howevery show up in the archive,

any idea? the rest works, all template edits are done

[karim004]

header and footer dont show anymore in the website, they do howevery show up in the archive,

any idea? the rest works, all template edits are done

check admincp , vBulletin Options , Advertisement System (Header & Footer)
even if you enable Enable header or footer advertisements in the main forum you must select what type of rotation :
ads rotation or auto refresh ads
check 1 reply
https://vborg.vbsupport.ru/showt...68#post1518268

[PlayfulGod]

:erm: my shyt dont show now after the upgrade. :mad:

[karim004]

Hi karim004, great hack, works like a charm, but I have a question: do any of the vBulletin conditionals work with it? So I could show different ads on different sections of the forum? Something along the lines of:

<if condition="in_array($forumid, array(X,Y,Z))">
show_ad_code1
<else />
show_ad_code2
</if>
yes silviu , works with all vb conditions

[erinys]

check admincp , vBulletin Options , Advertisement System (Header & Footer)
even if you enable Enable header or footer advertisements in the main forum you must select what type of rotation :
ads rotation or auto refresh ads
check 1 reply
https://vborg.vbsupport.ru/showt...68#post1518268

Thanks, that seems to work, but the ads are displayed completely on the bottom, even below the powered by vbulletin crap.

any idea how to get them a bit better placed? like just below the quickreply or alike?

thanks a lot for the help and suggestions

[karim004]

Thanks, that seems to work, but the ads are displayed completely on the bottom, even below the powered by vbulletin crap.

any idea how to get them a bit better placed? like just below the quickreply or alike?

thanks a lot for the help and suggestions
you mean footer ? well go to admincp , style manager , footer and move
$ad_location[ad_footer_end]
above
<div align="center">
<div class="smallfont" align="center">
<!-- Do not remove this copyright notice -->
$vbphrase[powered_by_vbulletin]
<!-- Do not remove this copyright notice -->
</div>

[scruffy]

Thanks.

[RedGTiVR6]

Glad to see this taken on!

We're looking for a solution for our current forums, and I'm a bit unsure if this is it for us. I've tried reading through, but with 16 pages, it's a bit difficult.

We need the following:

1) Google ads
1a) visible by user group (in other words, if not logged in, then will see the ads)
2) Rotating Banner ads
2a) shown to everyone, but possible to disable per user group as well
3) Sponsored forums - the ability to specify which banner will headline in which forum. Will not rotate

I understand that #3 might require a different mod all together...but I want to check.

Can anyone verify if this will work as we need it to?

Thanks!

[karim004]

Glad to see this taken on!

We're looking for a solution for our current forums, and I'm a bit unsure if this is it for us. I've tried reading through, but with 16 pages, it's a bit difficult.

We need the following:

1) Google ads
1a) visible by user group (in other words, if not logged in, then will see the ads)
2) Rotating Banner ads
2a) shown to everyone, but possible to disable per user group as well
not rotate

I understand that #3 might require a different mod all together...but I want to check.

Can anyone verify if this will work as we need it to?

Thanks!

yes you have all this (( and more ))

3) Sponsored forums - the ability to specify which banner will headline in which forum. Will
maybe i can add this in vext version

[RedGTiVR6]

sweet! all that AND a quick response!

I like it!

Will be downloading and installing as soon as we do our 7.1 PL2 update and SEO installs!

[erinys]

you mean footer ? well go to admincp , style manager , footer and move
$ad_location[ad_footer_end]
above
<div align="center">
<div class="smallfont" align="center">
<!-- Do not remove this copyright notice -->
$vbphrase[powered_by_vbulletin]
<!-- Do not remove this copyright notice -->
</div>

thanks man! that worked ;)

[Silviu]

yes silviu , works with all vb conditions

Well, the thing is that I'm trying to use the postbit_legacy ad location to show one ad code in a particular section and another for the rest of the forum (the ads are displayed as the last post in a thread).

So my code looks like this:

<if condition="$forumid == 22">
<div align="left">
{first ad script}
</div>
<else />
{second ad script}
</if>

But the conditional doesn't work, and both ads are displayed everywhere :(

Later edit: I also tried <if condition="$thread['forumid'] == 22">, but it doesn't work either.

[karim004]

Well, the thing is that I'm trying to use the postbit_legacy ad location to show one ad code in a particular section and another for the rest of the forum (the ads are displayed as the last post in a thread).

So my code looks like this:

<if condition="$forumid == 22">
<div align="left">
{first ad script}
</div>
<else />
{second ad script}
</if>

But the conditional doesn't work, and both ads are displayed everywhere :(

Later edit: I also tried <if condition="$thread['forumid'] == 22">, but it doesn't work either.
you must edit ad_postbit_below if you want use the condition in postbit&postbit_legacy
just put the code in template ad_postbit_below betwen
<if condition="$thread['forumid'] == 22"> and </if>

[Silviu]

you must edit ad_postbit_below if you want use the condition in postbit&postbit_legacy
just put the code in template ad_postbit_below betwen
<if condition="$thread['forumid'] == 22"> and </if>

So the end result would be:

<td class="alt1" align="center">
<if condition="$thread['forumid'] == 22">
<div align="left">
{first ad script}
</div>
<else />
$postbit_ad
</if>
</td>

?

[Keyser S?ze]

for postbit & postbit_legacy you have the ability to set more permissions like :

could you also make it to have it set after random post?

[:Judge:]

Thank you very much karim004 for sharing this add-on. Your hard work and generosity is most appreciated!

I do have a question on selecting an advert unique to a page much like Silviu here..

Well, the thing is that I'm trying to use the ad location to show one ad code in a particular section and another for the rest of the forum.


It would be realy nice to use a unique advert in the navbar between vBA Index, Arcade and classifieds. Is there an easy way to use a condition for a page?

Another idea is the option to exclud forum areas like private staff areas would be nice to. Again that's just an idea not a request. :)

[srkrocks]

Installed..Thanks!

[Juel]

Hi all, i just installed this on my v3.7 and it dosent work at all..
Why are the instructions for this so poor?
All i get is a error:
theslide has no properties
[Break on this error] if (theslide[1]!="")
In forum line 384.

what is this? and no matter what i click to on, no adds appeare..

[Adam21]

Uninstalling this mod will delete several default templates you have.BE AWARE!!!

[Juel]

I just get a error in my forum.. No adds at all just an error... i have followed the howto for the 3.7 version..

[JirQUEST]

I am having issues with the header and footer ads. They don't show at all. Tried whatever has been suggested in this thread to no avail.

[Videx]

I am having issues with the header and footer ads. They don't show at all. Tried whatever has been suggested in this thread to no avail.Be careful you don't have ad blockers on. And of course you haven't excluded your usergroup from seeing ads.

[G-man561]

I had the same issue, the header and footer ads were not showing up for me.
My footer ads only shows up when i enable "ads rotation", but my header is not showing up at all.

[Silviu]

Uninstalling this mod will delete several default templates you have.BE AWARE!!!

Can you tell us what templates are those and if there's any way to restore them if we have backups?

[karim004]

Can you tell us what templates are those and if there's any way to restore them if we have backups?
he talk about vb 3.7.X There is 5 non used templates : ad_header_end , ad_header_logo , ad_footer_end , ad_footer_start and ad_navbar_below

i just fix this prb by changing this 5 templates and to restore them you can run the upgrade.php or just wait till next vb relase because your forum dont use them

[Jeff_B]

I also can't get header, left column, right column, or nav bar ads to show. Only footer ads will show.

[Cooleyvol]

Will this work with multiple skins on the same forum? Multiple in that there are different color schemes, etc.

What about if I change to a custom template in the future?

[verino]

he talk about vb 3.7.X There is 5 non used templates : ad_header_end , ad_header_logo , ad_footer_end , ad_footer_start and ad_navbar_below

i just fix this prb by changing this 5 templates and to restore them you can run the upgrade.php or just wait till next vb relase because your forum dont use them

hello karim,

where you been ? :D

besides the 5 non used templates you mentioned, in the default style > header templates, i see : <if condition="$ad_location['ad_header_logo']">$ad_location[ad_header_logo]<else />&nbsp;</if>

Is this also done by your mod ? :D

Rgds.

[ByB]

Hi I'm new to the game :) but still smiling. Where do I find: vbulletion options , Advertisement System in the admincp.

Cheers ByB

Under "Generelt - generelt" in danish

[karim004]

06/26/2008 Version 2.3
*******************
fix :
*** new templates for header ,footer and navbar to do not delete the 5 templates : ad_header_end , ad_header_logo , ad_footer_end , ad_footer_start & ad_navbar_below when you uninstall this mod
*** fix a conflict betwen slideshow & header
for vb3.7 to restore the 5 ad location templates you can run the upload.php or just wait untill vb relase because you dont use them

plz before you update make sure you save your adcodes for header , footer , affiliates , navbar and slideshow . and read the file upgrade from v2.1v2.2 for vb3.7

[Videx]

Where do I find: vbulletion options , Advertisement System in the admincp.Vbulletin options is at the top of the left side column. Open it up and select 'vbulletin options' underneath it. There are 5 advertisement options.